Your Emergency Vehicle Equipment Super Source
EMERGENCY VEHICLE EQUIPMENT
EMERGENCY LIGHTING | LIGHTING CONTROL | PRISONER TRANSPORT | INSTALLER ACCESSORIES
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20v.0917
17 | 1
2 | B R O O K I N G I N D U S T R I E S .C O M
TABLE OF CONTENTS
Perimeter/Hideaway Lighting
ST Series Lightheads
AL6 Series Lightheads
MS Series Lighthead
HB6 Lighthead
ID Series Lighthead
TLED04B Lighthead
M53 Hideaway Insert
HAL09 Hideaway Insert
PAL06 Hideaway Insert
HAL06 Hideaway Insert
TAL06 Hideaway Insert
ES6 Lighthead
4
4
7
8
11
12
13
16
16
16
17
17
18
Warning / Directional Light Stick
Rear Spoiler Pod (Ford Explorer)
Rear Hatch Pod (Chevy Tahoe)
RayZR Light Stick
19
19
20
21
Mini Lightbars
22
Work / Area Lighting
25
Beacons28
Loud Speaker
31
Rooftop Lightbars
32
Torrent32
Legion34
Dash / Deck Lighting
36
Consoles38
Lighting Control
Digital / Programmable Smart Panels
Rocker Switchboxes
Rocker Switch-Plates
40
40
42
44
Plug & Play Flashers
46
Headlight46
Tailight48
Prisoner Transport Equipment
50
Accessories52
12V Outlet Boxes
52
Circuit Breakers
54
Power Distribution Panel
54
Fuse Blocks
55
Overhead LED Dome Light
56
Hard Seat Organizer
56
Body Armor Hanger
57
Tactical Bag Insert
57
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 1
C˚ F˚
C˚ F˚
LED LIGHTING
ICON GUIDE5
5
WARRANTY
WARRANTY
WARRANTY
These icons represent the main features for the LED lighting products.
WARRANTY
Please reference these icons and their meanings as you explore our LED lighting sections.
Multi-unit synchronization in simultaneous
or alternating flash modes
3
3
Weatherproof & vibration resistant
100K+
RATED
100K+
RATED
100K+
RATED
100K+
Non-volatile memory recalls last flash
pattern used at power up
Reverse polarity protection
RATED
C˚ F˚
100K+
C˚ F˚
RATED
C˚ F˚
C˚ F˚hours of operation
LEDs rated to 100,000+
Aluminum base for heat dissipation
C˚ F˚
5
5
5
5
3
3
3
3
5
3
WARRANTY
WARRANTY
2
2
2
2
WARRANTY
WARRANTY
WARRANTY
WARRANTY
WARRANTY
WARRANTY
WARRANTY
WARRANTY
WARRANTY
WARRANTY
WARRANTY
WARRANTY
5 year, no-hassle warranty
2 | B R O O K I N G I N D U S T R I E S .C O M
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 3
PERIMETER LIGHTING
ST3 3 LED SUPER-THIN
SURFACE MOUNT
GENERAL SPECIFICATIONS
ST SERIES
LIGHTHEADS
•
•
•
•
•
•
•
•
Flash Patterns: 12
Input Voltage: 12~24 Vdc
Current Draw: 0.24A @ 12Vdc - 0.12A @ 24Vdc
Sync: 15+ Units
LED Count: 3
Dimensions: 3.38"L X 1.1"H X 0.35"D
Certificates: SAE J595 Class 1; CA Title 13, ECE R10-04
Colors: Amber, Blue, Red, White
FEATURES
C˚ F˚
5
100K+
RATE
WARRANTY
BENEFITS
• Super-thin profile
• Black bezel included - white & chrome sold separately
ST6 6 LED SUPER-THIN
SURFACE MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 19
Input Voltage: 12~24 Vdc
Current Draw: 0.5A @ 12Vdc - 0.25A @ 24Vdc
Sync: 15+ Units
LED Count: 6
Dimensions: 4.4"L X 1.1"H X 0.35"D
Certificates: SAE J595 Class 1; CA Title 13, ECE R10-04
Colors: Amber, Blue, Red, White & most split-color combinations
FEATURES
C˚ F˚
5
100K+
RATE
WARRANTY
BENEFITS
• Super-thin profile
• Black bezel included - white & chrome sold separately
4 | B R O O K I N G I N D U S T R I E S .C O M
PERIMETER LIGHTING
ST6V 6 LED SUPER-THIN
SURFACE MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 19
Input Voltage: 12~24 Vdc
Current Draw: 0.5A @ 12Vdc - 0.25A @ 24Vdc
Sync: 15+ Units
LED Count: 6
Dimensions: 4.4"L X 1.1"H X 0.35"D
Certificates: SAE J595 Class 1; CA Title 13, ECE R10-04
Colors: Amber, Blue, Red, White & most split-color combinations
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
• Super-thin profile
• Vertical optics provide 30% more output when mounted vertically
• Black bezel included - white and chrome sold separately
ST26 12 LED SUPER-THIN
SURFACE MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 25
Input Voltage: 12~24 Vdc
Current Draw: 0.78A @ 12Vdc - 0.39A @ 24Vdc
Sync: 15+ Units
LED Count: 12
Dimensions: 4.4"L X 1.71"H X 0.35"D
Certificates: SAE J595 Class 1; ECE R65 Class 2, ECE R10
Colors: Amber, Blue, Red, White & most split-color combinations (top / bottom)
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
• Super-thin profile
• 3 flash modes (top/bottom - side/side - criss-cross)
• Black bezel included - white and chrome sold separately
XT6 6 LED XTREME-THIN SURFACE MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 16
Input Voltage: 12~24 Vdc
Current Draw: 044A @ 12Vdc - 0.22A @ 24Vdc
Sync: 15+ Units
LED Count: 6
Dimensions: 3.88"L X 1.38"H X 0.39"D
Certificates: SAE J595 Class 1; CA Title 13, ECE R10 / 65
Colors: Amber, Blue, Red, White (solid colors only)
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
• Super-thin profile | Xtreme linear optics
• Black bezel included - white & chrome sold separately (Pictured with black bezel)
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 5
PERIMETER LIGHTING
XT12 12 LED XTREME-THIN
SURFACE MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 26 (vary by color mode)
Input Voltage: 12~24 Vdc
Current Draw: 0.88A @ 12Vdc - 0.44A @ 24Vdc
Sync: 15+ Units
LED Count: 12 (dual color is 6x6 interleaved)
Dimensions: 5.22"L X 1.77"H X 0.39"D
Certificates: SAE J595 Class 1; ECE R65 Class 2, ECE R10
Colors: Amber, Blue, Red, White & most interleaved combinations
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
• Super-thin profile | Xtreme linear optics
• Available in single color (all 12), or dual color (12 interleaved)
• Black bezel included - white and chrome sold separately
6 | B R O O K I N G I N D U S T R I E S .C O M
PERIMETER LIGHTING
AL6 SERIES
LIGHTHEADS
AL6M 6 LED
UNDER MIRROR MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 16
Input Voltage: 12~24 Vdc
Current Draw: 0.57A @ 12Vdc - 0.285A @ 24Vdc
Sync: 15+ Units
LED Count: 6
Dimensions: 2.91"L X 1.37"H X 2.63"D (With Bracket And Cover)
Certificates: SAE J595 - J845, ECE R65 / R10
Colors: Amber, Blue, Red, White & most split-color combinations
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
• Wrap around lens with linear optics produces super-effective, wide-angle output
• Unique bracketry allows for under-mirror mount on most vehicles, no additional wedges /
parts necessary
AL6S 6 LED
SURFACE MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 16
Input Voltage: 12~24 Vdc
Current Draw: 0.57A @ 12Vdc - 0.285A @ 24Vdc
Sync: 15+ Units
LED Count: 6
Dimensions: 3.81"L X 1.36"H X 1.41"D
Certificates: SAE J595 - J845, ECE R65 / R10
Colors: Amber, Blue, Red, White & most split-color combinations
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
• Wrap around lens with linear optics produces super-effective, wide-angle output
• Black bezel included - white and chrome sold separately
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 7
PERIMETER LIGHTING
MS SERIES
LIGHTHEADS
MS6BSV 6 LED WITH VERTICAL OPTICS
8 | B R O O K I N G I N D U S T R I E S .C O M
PERIMETER LIGHTING
MS6BS 6 LED
SURFACE MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 19
Input Voltage: 12~24 Vdc
Current Draw: 0.49A @ 12Vdc - 0.24A @ 24Vdc
Sync: 15+ Units
LED Count: 6
Dimensions: 5.0"L X 1.1"H X 0.68"D
Certificates: SAE J595 - J895, CA Title 13, ECE R10-04
Colors: Amber, Blue, Red, Green, White & most split-color combinations
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
• Low-profile design facilitates installation in tight spaces
MS6BSV 6 LED WITH VERTICAL OPTICS
SURFACE MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 19
Input Voltage: 12~24 Vdc
Current Draw: 0.49A @ 12Vdc - 0.24A @ 24Vdc
Sync: 15+ Units
LED Count: 6
Dimensions: 5.0"L X 1.1"H X 0.68"D
Certificates: SAE J595 - J895, CA Title 13, ECE R10-04
Colors: Amber, Blue, Red, White & most split-color combinations
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
• Vertical optics provide 30% more output when mounted vertically
• Low-profile design facilitates installation in tight spaces
MS6D 12 LED DUAL COLOR
SURFACE MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 12
Input Voltage: 12~24 Vdc
Current Draw: 0.6A @ 12Vdc - 0.3A @ 24Vdc
Sync: 15+ Units
LED Count: 12 (Interleaved)
Dimensions: 5.0"L X 1.1"H X 0.68"D
Certificates: SAE J595, CA Title 13, ECE R10-04
Colors: Amber, Blue, Red, White & most interleaved combinations
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
• Low profile
• DUAL COLOR - run color 1 or color 2, or alternate between the two
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 9
PERIMETER LIGHTING
MS26BS 12 LED
SURFACE MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 25
Input Voltage: 12~24 Vdc
Current Draw: 1.0A @ 12Vdc - 0.5A @ 24Vdc
Sync: 15+ Units
LED Count: 12
Dimensions: 5.0"L X 1.92"H X 0.76"D
Certificates: SAE J595, CA Title 13, ECE R10-04
Colors: Amber, Blue, Red, White & most split-color combinations (top / bottom)
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
• Low profile
• 3 Flash modes (top/bottom - side/side - criss-cross)
MS3BS 3 LED
SURFACE MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 12
Input Voltage: 12~24 Vdc
Current Draw: 0.2A @ 12Vdc - 0.11A @ 24Vdc
Sync: 15+ Units
LED Count: 3
Dimensions: 3.4"L X 1.1"H X 0.6"D
Certificates: SAE J595, CA Title 13, E13
Colors: Amber, Blue, Green, Red, White
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
• Low profile
• Compact design allows for mounting in tight spaces
MS3BH 3 LED
MULTI-MOUNT
GENERAL SPECIFICATIONS
Flash Patterns: 12
Input Voltage: 12~24 Vdc
Current Draw: 0.2A @ 12Vdc - 0.11A @ 24Vdc
Sync: 15+ Units
LED Count: 3
Dimensions: 2.5"L X 0.94"H X 1.5"D (With Bracket)
Certificates: SAE J595, CA Title 13, E13
Colors: Amber, Blue, Red, White
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
•M
ulti-Mount design: Permanent (requires drilling), exposed edge & 3M™ double-sided
adhesive (no holes drilled)
10 | B R O O K I N G I N D U S T R I E S .C O M
PERIMETER LIGHTING
MS6BH 6 LED
MULTI-MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 19
Input Voltage: 12~24 Vdc
Current Draw: 0.49A @ 12Vdc - 0.24A @ 24Vdc
Sync: 15+ Units
LED Count: 6
Dimensions: 4.2"L X 0.94"H X 1.5"D (With Bracket)
Certificates: SAE J595 - J895, CA Title 13, ECE R10-04
Colors: Amber, Blue, Red, White & most split-color combinations
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
•M
ulti-Mount design: Permanent (requires drilling), exposed edge & 3M™ double-sided
adhesive (no holes drilled)
HB6
LIGHTHEAD
HB6 6 LED
NEW
DUAL FUNCTION SURFACE MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 14
Input Voltage: 12~24 Vdc
Current Draw: 0.675A @ 12Vdc - 0.375A @ 24Vdc
Sync: 15+ Units
LED Count: Warning Flashing: 6 Flood Ring: 18
Dimensions: 5.20"L X 1.98"H X 0.74"D
Certificates: SAE J595 Class 1, J592, J2042, CA Title 13
Colors: Amber, Blue, Red, White (choose one for inner 6 and one for outer ring) Not available with split color inner 6
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
• Low-profile design
• Dual Function: Interior warning LED's surrounded by independent outer ring
• Outer Ring Uses: Scene (white), Cruise / ID, Stop / Tail / Turn
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 11
PERIMETER LIGHTING
ID SERIES
LIGHTHEADS
ID6 6 LED
PROGRAMMABLE SURFACE MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 15 (W/ 8 Modes Per Fp)
Input Voltage: 12~24 Vdc
Current Draw: 0.5A @ 12Vdc - 1.24A @ 24Vdc
Sync: 15+ Units
LED Count: 6
Dimensions: 5.09"L X 1.24"H X 0.66"D
Certificates: SAE J595 Class 1, ECE R65 / R10-04
Colors: Amber, Blue, Red, White & most split-color combinations
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
• Low-profile design
• Wrap around lens and off-set LEDs on the ends produce wider light spread
• Dual memory capability - set mode 1 as cruise / ID / flood mode and mode 2 for warning
(warning overrides cruise)
ID26 12 LED
PROGRAMMABLE SURFACE MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 15 (W/ 8 Modes Per Fp)
Input Voltage: 12~24 Vdc
Current Draw: 0.88A @ 12Vdc - 0.44A @ 24Vdc
Sync: 15+ Units
LED Count: 12
Dimensions: 5.09"L X 1.98"H X 0.66"D
Certificates: SAE J595 Class 1, ECE R65 / R10-04
Colors: Amber, Blue, Red, White & most split-color combinations (top / bottom)
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
• Low-profile design
• Wrap around lens and off-set LEDs on the ends produce wider light spread
• Dual memory capability - set mode 1 as cruise / ID / flood mode and mode 2 for warning
(warning overrides cruise)
12 | B R O O K I N G I N D U S T R I E S .C O M
PERIMETER LIGHTING
FI-FIS: ABS FENDER TAB INSERTS
FOR 2013+ FORD INTERCEPTOR SEDAN
ID6 6 LED
TLED04B
LIGHTHEAD
TLED04B 4 LED
SURFACE MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 19
Input Voltage: 11~30 Vdc
Current Draw: 0.28A @ 12Vdc - 0.15A @ 24Vdc
Sync: 15+ Units
LED Count: 4
Dimensions: 4.8"L X 1.6"H X 1.2"D
Certificates: SAE J595, CA Title 13, E13, E13
Colors: Amber, Blue, Red, White & most split-color combinations
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
• Economical and reliable
• Black bezel included - chrome sold separately
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 13
PERIMETER LIGHTING
HAL06 6 LED
HIDE-AWAY INSERTS /
SURFACE MOUNT
14 | B R O O K I N G I N D U S T R I E S .C O M
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 15
PERIMETER LIGHTING
M53 3 LED
HIDE-AWAY / SURFACE MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 12
Input Voltage: 12~24 Vdc
Current Draw: 0.24A @ 12Vdc - 0.12A @ 24Vdc
Sync: 15+ Units
LED Count: 3
Dimensions: 1.84" Diameter X 0.67"D
Certificates: SAE J595, CA Title 13, E13
Colors: Amber, Blue, Red and White
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
• Hybrid design - surface mount (w/ bezel) or hide-away (discard bezel)
• Black bezel included; white and chrome sold separately
HAL09 9 LED
HIDE-AWAY / SURFACE MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
Flash Patterns: 19
Input Voltage: 12~24 Vdc
Current Draw: 1.25A @ 12Vdc - 0.63A @ 24Vdc
Sync: 15+ Units
LED Count: 9
Dimensions: Insert: 1.49" Diameter X 1.13"H X 0.67"D Bezel: 2.26"L X 1.65H X 0.4"D
Colors: Amber, Blue, Red, White
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
• Pyramid (3x3x3) design produces 360° output
• 1 in-line flasher powers both modules
• Black bezel included - white and chrome sold separately
PAL06 6 LED
HIDE-AWAY / SURFACE MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
Flash Patterns: 19
Input Voltage: 10~16 Vdc
Current Draw: 0.65A @ 12Vdc
Sync: 15+ Units
LED Count: 6
Dimensions: Insert: 1" Diameter X 0.95"H X 1.2"D Bezel: 2.26"L X 1.65"H X 0.4"D
Colors: Amber, Blue, Red, White & most split-color combinations
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
• Rubber grommet base facilitates quick and easy installation
• Black bezel included - white and chrome sold separately
16 | B R O O K I N G I N D U S T R I E S .C O M
PERIMETER LIGHTING
HAL06 6 LED
HIDE-AWAY / SURFACE MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
Flash Patterns: 19
Input Voltage: 10~16 Vdc
Current Draw: 0.65A @ 12Vdc
Sync: 15+ Units
LED Count: 6
Dimensions: Insert: 1.1" Diameter X 0.84"H X 1.26"D Bezel: 2.26"L X 1.65H X 0.4"D
Colors: Amber, Blue, Red, White & most split-color combinations
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
• 45° LED orientation
• 1 in-line flasher powers both heads
• Black bezels included - white and chrome sold separately
TAL06 6 LED TWIST-LOCK HIDE-AWAY
HIDE-AWAY
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 19
Input Voltage: 10~16 Vdc
Current Draw: 0.65A @ 12Vdc
Sync: 15+ Units
LED Count: 6
Dimensions: Insert: 1.03" Diameter X 0.5"H
Certificates: SAE J595 Class 1
Colors: Amber, Blue, Red, White & most split-color combinations
FEATURES
C˚ F˚
100K+
RATE
5
WARRANTY
BENEFITS
•
•
•
•
Twist-lock design facilitates no-holes drilled installation
Optional L-bracket available for alternative applications
Optical lens maximizes output
1 in-line flasher powers both heads
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 17
PERIMETER LIGHTING
ES6 LIGHTHEAD
LPF46 - Universal License Plate Frame
ES6 6 LED
MULTI-MOUNT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 23
Input Voltage: 12~24 Vdc
Current Draw: 0.57A @ 12Vdc - 0.29A @ 24Vdc
Sync: 15+ Units
LED Count: 6
Dimensions: 5.09"L X 0.62"H X 1.07"D
Certificates: SAE J595 Class 1, CA Title 13, ECE R65 / R10
Colors: Amber, Blue, Red, White & most split-color combinations
FEATURES
C˚ F˚
5
100K+
RATE
WARRANTY
BENEFITS
• Low-profile design facilitates installation in tight spaces - the narrowest light in the marketplace
• Composite mounting tabs included standard provide a variety of mounting options and
saves cost of additional brackets
ES6 MOUNTING BRACKETS
UNIVERSAL BRACKET (Multi-angle)
"
5.5
L-BRACKETS (Front/Rear)
6"
3.6
5.5"
18 | B R O O K I N G I N D U S T R I E S .C O M
2.5"
WARNING / DIRECTIONAL LIGHT STICK
RayZR LIGHT STICK
FIU-RLP REAR SPOILER POD
Ford Utility
GENERAL SPECIFICATION
• Vacuum-formed, UV-stabilized ABS plastic RayZR pod for 2013+ Ford Explorer
BENEFITS
• No-holes drilled mounting (user choice)
• Mounts outside of the vehicle, providing maximum warning power without obstructing driver's rear-view
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 19
WARNING / DIRECTIONAL LIGHT STICK
RHP-CT15 REAR HATCH POD
8 HEAD
RayZR LIGHT STICK
2 0 | B R O O K I N G I N D U S T R I E S .C O M
WARNING / DIRECTIONAL LIGHT STICK
RHP-CT15 REAR HATCH POD
Chevy Tahoe
GENERAL SPECIFICATION
• Vacuum-formed, UV-stabilized ABS plastic RayZR pod for 2015+ Chevrolet Tahoe
BENEFITS
• Upgrade and add surface mount lightheads to sides
• No-holes drilled mounting (user choice)
• Mounts outside of the vehicle, providing maximum warning power without obstructing
driver's rear-view
8 HEAD RayZR LIGHT STICK
SPECIFICATIONS
•
•
•
•
•
•
Flash Patterns: 4 Head: 27 (No Traffic Patterns) - 6, 8 & 10 Head: 20 Warning / 11 Traffic
Input Voltage: 12~24 Vdc
Current Draw (@ 12.8 Vdc): 4 Head 1.1A, 6 Head 1.5A, 8 Head 1.9A, 10 Head 2.4A
Sync: No
LED Count: Varies By Length / Head Count (3 LED's Per Module)
Dimensions:
– Length: 4 Head - 18" | 6 Head - 26.50" | 8 Head - 34.50" | 10 Head - 43.44"
– Height: 0.95"
– Depth: 1.50"
• Certificates: SAE J595 Class 1, SAE J845, CA Title 13
• Colors: Amber, Blue, Red, White
FEATURES
100K+
RATED
5
WARRANTY
BENEFITS
•
•
•
•
•
Low profile
Lightweight
Directional arrow patterns included at no additional charge (6, 8 & 10 head)
Field service-friendly
Vehicle-specific pods and multiple universal mounting options available
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 2 1
MINI LIGHTBARS
MINI G6
G6 6 HEAD
GENERAL SPECIFICATIONS
•
•
•
•
•
Flash Patterns: 19 | Input Voltage: 12 Vdc
Current Draw: 1.6A @ 12Vdc | Sync: 15+ Units | LED Count: 18
Dimensions: 16.7"L X 2.9"H X 6.3"D | Colors: Amber, Blue, Red, White
Certificates: SAE J845 Class 1, CA Title 13
Colors: Amber, Blue, Red, White
FEATURES
100K+
RATED
5
WARRANTY
BENEFITS
•
•
•
•
6 super-bright reflector LED modules
Fluted / optical dome
Available In Magnetic, Suction Magnet or Permanent Mount
Magnetic Mount versions come with a fused, dual-switch cigar plug
FALCON SERIES
F84 8 HEAD XTREME LINEAR
GENERAL SPECIFICATIONS
•
•
•
•
Flash Patterns: 26 | Input Voltage: 12 Vdc
Current Draw: 2.6A @ 12.8Vdc | Sync: 15+ Units | LED Count: 40
Dimensions: 17"L X 2.6"H X 11"D | Colors: Amber, Blue, Green, Red, White, Green
Certificates: SAE J845 Class 1, CA Title 13
FEATURES
100K+
RATED
5
WARRANTY
BENEFITS
•
•
•
•
Eight Xtreme Linear LED modules
Unique Octoganal Design produces True 360° Output
Available In Magnetic, Suction Magnet or Permanent Mount
Magnetic Mount versions come with a fused, dual-switch cigar plug
FE3 10 HEAD
GENERAL SPECIFICATIONS
•
•
•
•
Flash Patterns: 26 | Input Voltage: 12 ~ 24 Vdc
Current Draw: 2.65A @ 12.8Vdc - 1.31A @ 24Vdc | Sync: 15+ Units | LED Count: 40
Dimensions: 17"L X 2.6"H X 11"D | Colors: Amber, Blue, Red, White
Certificates: SAE J845 Class 1, CA Title 13
FEATURES
100K+
RATED
5
WARRANTY
BENEFITS
•
•
•
•
2 2 | B R O O K I N G I N D U S T R I E S .C O M
10 Con-Optic LED modules
Unique octagonal design produces true 360° output
Available In Magnetic, Suction Magnet or Permanent Mount
Magnetic Mount versions come with a fused, dual-switch cigar plug
MINI LIGHTBARS
MICROBAR SERIES
MB30 10 HEAD
GENERAL SPECIFICATIONS
•
•
•
•
Flash Patterns: 23 | Input Voltage: 12 ~ 24Vdc
Current Draw: 2.5A @ 12Vdc - 1.25A @ 24Vdc | Sync: 15+ Units | LED Count: 30
Dimensions: 9.76"L X 1.45"H X 6.77"D | Colors: Amber, Blue, Green, Red, White
Certificates: SAE J845, CA Title 13, ECE R65
FEATURES
100K+
RATED
5
WARRANTY
BENEFITS
•
•
•
•
10 High-Powered LED Modules
Compact, low-profile design - easy to transfer between vehicles
Available In Magnetic, Suction Magnet Or Permanent Mount
Magnetic Mount versions come with a fused, dual-switch cigar plug
L05 MB-EXD DUAL COLOR 14 HEAD
GENERAL SPECIFICATIONS
•
•
•
•
Flash Patterns: 24 | Input Voltage: 12 ~ 24Vdc
Current Draw: 3.1A @ 12Vdc - 1.55A @ 24Vdc | Sync: 15+ Units | LED Count: 42
Dimensions: 15.74"L X 1.45"H X 6.77"D | Colors: Amber, Blue, Green, Red, White
Certificates: SAE J845, CA Title 13, ECE R10 / R65
FEATURES
100K+
RATED
5
WARRANTY
BENEFITS
•
•
•
•
10 High-Powered LED Modules
Compact, low-profile design - easy to transfer between vehicles
Available In Magnetic, Suction Magnet Or Permanent Mount
Magnetic Mount versions come with a fused, dual-switch cigar plug
L07 MB-EXD DUAL COLOR 6 HEAD
GENERAL SPECIFICATIONS
• Flash Patterns: 24 | Input Voltage: 12 ~ 24Vdc
• Current Draw: 3A @ 12Vdc - 1.5A @ 24Vdc | Sync: 15+ Units | LED Count: 72
• Dimensions: 15.74"L X 1.45"H X 6.77"D | Colors: Amber, Blue, Red, White (Choose Up To 3)
• Certificates: SAE J845
FEATURES
100K+
RATED
5
WARRANTY
BENEFITS
• 12 LED light modules (interleaved) - compact, low-profile design - change color mode on the fly
• Compact, low-profile design - easy to transfer between vehicles
• Color Changing: Switch From one color mode to another on the fly
• Available In Magnetic, Suction Magnet Or Permanent Mount
• Magnetic Mount versions come with a fused, dual-switch cigar plug
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 2 3
WORK / AREA LIGHTING
WLD-6B074-00
4 LED WORK LAMP
2 4 | B R O O K I N G I N D U S T R I E S .C O M
WORK / AREA LIGHTING
WORK/AREA
LIGHTING
WLD-6B074-00 4 LED WORK LAMP
GENERAL SPECIFICATIONS
• I nput Voltage: 11 ~ 70 Vdc | Max Current Draw: 2.2A @ 12.8Vdc - 1.2A @
25.6Vdc - 0.5A @ 60Vdc
• LED Count: 4 | LED Output: 3200lm
• Dimensions: 4.9" L X 5.1"H (With Bracket) X 3.2"D
• Certificates: EMC, IP68
• Mounts: U Bracket / Bayonet
FEATURES
C˚ F˚
100K+
RATED
5
WARRANTY
BENEFITS
•
•
•
•
Multi-voltage input
Heavy-duty, powder-coated, die-cast aluminum housing
Wide flood beam
Waterproof Deutsch™ brand connectors
WLE-6B076-00 6 LED WORK LAMP
GENERAL SPECIFICATIONS
• Input Voltage: 11 ~ 70 Vdc | Max Current Draw: 3.6A @ 12.8Vdc - 1.8A @
25.6Vdc - 0.8A @ 60Vdc
• LED Count: 6 | LED Output: 4800lm
• Dimensions: 6.1" L X 6.9"H (With Bracket) X 3.2"D
• Certificates: EMC, IP68
• Mounts: U Bracket / Bayonet
FEATURES
C˚ F˚
100K+
RATED
5
WARRANTY
BENEFITS
•
•
•
•
Multi-voltage input
Heavy-duty, powder-coated, die-cast aluminum housing
Wide flood beam
Waterproof Deutsch™ brand connectors
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 2 5
WORK / AREA LIGHTING
WLB-506FB-D7 6 LED WORK LAMP
GENERAL SPECIFICATIONS
•
•
•
•
•
Input Voltage: 10 ~ 70 Vdc | Max Current Draw: 2A @ 12.8Vdc - 0.9A @ 25.6Vdc
LED Count: 6 | LED Output: 1900lm
Dimensions: Diameter: 4.6" - Height W/ Bracket: 5.7" - Depth: 2.6"
Certificates: EMC, IP67
Mounts: U Bracket / Bayonet
FEATURES
C˚ F˚
100K+
RATED
5
WARRANTY
BENEFITS
• Multi-voltage input
• Heavy-duty, powder-coated, die-cast aluminum housing
• Wide flood beam
WLC-506FB-D7 6 LED WORK LAMP
GENERAL SPECIFICATIONS
•
•
•
•
•
Input Voltage: 10 ~ 70 Vdc | Max Current Draw: 2A @ 12.8Vdc - 0.9A @ 25.6Vdc
LED Count: 6 | LED Output: 1900lm
Dimensions: 4.6" L X 5.6"H (With Bracket) X 2.6"D
Certificates: EMC, IP67
Mounts: U Bracket / Bayonet
FEATURES
C˚ F˚
100K+
RATED
5
WARRANTY
BENEFITS
• Multi-voltage input
• Heavy-duty, powder-coated, die-cast aluminum housing
• Wide flood beam
BXLEDB 10 LED SCENE LIGHT
GENERAL SPECIFICATIONS
•
•
•
•
•
Input Voltage: 10 ~ 30 Vdc | Max Current Draw: 1.2A @ 12.8Vdc - 0.6A @ 25.6Vdc
LED Count: 10
Dimensions: 6.3" L X 3.1"H X 2.2"D (w/o angled box bracket)
Certificates: EMC, IP68
Mounts: Surface mount with or without powder coated steel, angled box bracket
FEATURES
C˚ F˚
100K+
RATED
5
WARRANTY
BENEFITS
• Multi-voltage input
• Heavy-duty, powder-coated, die-cast aluminum housing
• Produces softly spread, non-blinding yet effective scene lighting
2 6 | B R O O K I N G I N D U S T R I E S .C O M
WORK / AREA LIGHTING
WLH-1B031-00 4 LED ECONOMY WORK LAMP
GENERAL SPECIFICATIONS
•
•
•
•
•
Input Voltage: 12 ~ 24 Vdc | Max Current Draw: 0.6A @ 12Vdc - 0.3A @ 25.6Vdc
Illumination: Flood | LED Count: 4 | LED Output: 500lm
Dimensions (W/ Bracket): 3.3"L X 3.5"H X 1.1"D
Certificates: EMC
Mounts: U Bracket / Bayonet
FEATURES
C˚ F˚
100K+
RATED
5
WARRANTY
BENEFITS
• Multi-voltage input
• Heavy-duty, powder-coated, die-cast aluminum housing
• Wide flood beam
WLG-1B051-00 4 LED WORK LAMP
GENERAL SPECIFICATIONS
•
•
•
•
•
Input Voltage: 10 ~ 70 Vdc | Max Current Draw: 1.2A @ 9Vdc - 0.2A @ 50Vdc
LED Count: 4 | LED Output: 900lm
Dimensions: Diameter: 3.78" - Height W/ Bracket: 4.65" - Depth: 2.9"
Certificates: EMC, IP68
Mounts: U Bracket / Bayonet
FEATURES
C˚ F˚
100K+
RATED
5
WARRANTY
BENEFITS
• Multi-voltage input
• Heavy-duty, powder-coated, die-cast aluminum housing
• Wide flood beam
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 2 7
BEACONS
BEACONS
B14 8 LED
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
•
Flash Patterns: 11
Input Voltage: 12 ~ 24 Vdc
Current Draw: 1.7A @ 12.8Vdc - 0.88A @ 24Vdc
SYNC:: 15+ units
LED Count: 8
Dimensions: 5.04" dome w/ base H x 5.6" base diameter
Certificates: SAE J845, CA Title 13, ECE R10 / R65
Mount: Flat / Pipe, Magnetic
Colors: Amber (with amber or clear dome)
FEATURES
100K+
RATED
5
WARRANTY
B15 12 LED
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
•
Flash Patterns: 15
Input Voltage: 12 ~ 24 Vdc
Current Draw: 1.25A @ 12.8Vdc - 0.63A @ 24Vdc
SYNC:: 15+ units
LED Count: 8
Dimensions: 6.25" dome w/ base H x 6.6" base diameter
Mount: Flat / Pipe, Magnetic
Certificates: Class 1, SAE J845, CA Title 13
Colors: Amber LEDs w/ amber dome
FEATURES
100K+
RATED
5
WARRANTY
2 8 | B R O O K I N G I N D U S T R I E S .C O M
BEACONS
B16 8 LED
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
•
Flash Patterns: 11
Input Voltage: 12 ~ 24 Vdc
Current Draw: 1.2A @ 12.8Vdc - 0.7A @ 24Vdc
SYNC:: 15+ units
LED Count: 8
Dimensions: 3.15" dome w/ base H x 5.59" base diameter
Certificates: SAE J845, CA Title 13, ECE R10 / R65
Mount: Flat / Pipe, Magnetic
Colors: Amber LEDs w/ amber dome
FEATURES
5
100K+
RATED
WARRANTY
B17 4 LED
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
•
Flash Patterns: 15
Input Voltage: 10 ~ 30 Vdc
Current Draw: 0.55A @ 12.8Vdc - 0.3A @ 24Vdc
SYNC:: 15+ units
LED Count: 8
Dimensions: 4.88" dome w/ base H x 6.6" base diameter
Certificates: Class 1, SAE J845
Mount: Flat / Pipe, Magnetic
Colors: Amber LEDs w/ amber dome
FEATURES
5
100K+
RATED
WARRANTY
BR-LEDBH 8 LED
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 15
Input Voltage: 12 ~ 24Vdc
Current Draw: 1.2A @ 12Vdc - 0.6A @ 24Vdc
LED Count: 8
Dimensions: 6.75"H x 6.5"
Mount: Flat / Pipe
Certificates: SAE J845 / J578
Colors: Amber, Blue, Green, Red, Clear (white) - LEDs match dome color
FEATURES
100K+
RATED
5
WARRANTY
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 2 9
BEACONS
JB45L6 6 LED
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 1 (ultra 8, 45 FPM)
Input Voltage: 11 ~ 110 Vdc
Current Draw: 0.24A @ 12.8Vdc - 0.14A @ 110Vdc
SYNC:: No
LED Count: 6
Dimensions: 4.92" dome w/ base H x 5.9" base diameter
Mount: Flat / Pipe, Magnetic
Colors: Amber (with amber or clear dome)
FEATURES
5
100K+
RATED
WARRANTY
JB106L3-DOA 3 LED
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 1 (ultra 8, 45 FPM)
Input Voltage: 11 ~ 110 Vdc
Current Draw: 0.12A @ 12.8Vdc - 0.08A @ 110Vdc
SYNC:: No
LED Count: 6
Dimensions: 5.12" dome w/ base H x 3.86" base diameter
Mount: Flat Surface / Permanent, Magnetic
Colors: Amber
FEATURES
5
100K+
RATED
WARRANTY
JB130L3-DOA 3 LED
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 1 (ultra 8, 45 FPM)
Input Voltage: 11 ~ 110 Vdc
Current Draw: 0.12A @ 12.8Vdc - 0.08A @ 110Vdc
SYNC:: No
LED Count: 3
Dimensions: 3.86" dome w/ base H x 5.12" base diameter
Mount: Flat Surface / Permanent, Magnetic
Colors: Amber
FEATURES
100K+
RATED
5
WARRANTY
30 | B R O O K I N G I N D U S T R I E S .C O M
LOUD SPEAKER
LOUD SPEAKER
LS-100 100W LOUD SPEAKER
GENERAL SPECIFICATIONS
•
•
•
•
•
•
Watts: 100W
Magnet: Neodymium
Impedance: 8/11 Ohms Nominal
Frequency Response: 450-3500 Hz +/- 10dB Nominal
Dispersion: 80° x 105° 1KHz Octave Band
Dimensions: 5.2"H x 6.4"W x 3"D
FEATURES
•
•
•
•
Compact design with powerful 100-watt output - fits most vehicles
Produces loud emergency signaling and intelligible voice / P.A.
Durable aluminum housing with black, powder-coat finish
Includes universal bail bracket and mounting hardware
LS-100 100W LOUD SPEAKER
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 31
ROOFTOP LIGHTBARS
ROOFTOP
LIGHTBARS
TORRENT
LE SERIES TORRENT
32 | B R O O K I N G I N D U S T R I E S .C O M
Introducing the second generation
TORRENT ROOFTOP LIGHTBAR.
Redesigned light modules and software
have rejuvenated what was already
the most reliable, and affordable
lightbar in the industry.
COMMON FEATURES
•
•
•
•
•
•
•
•
Low-profile design
2nd generation optics improve output and aesthetics
2nd generation software provides additional color change options (full front flood)
Extruded aluminum chassis provides strength / rigidity, and dissipates heat
Lenses are UV-stabilized, greatly reducing the yellowing and cracking associated with exposure to extreme temperatures
Traffic control patterns included at no additional charge
Available LED colors: Amber, Blue, Red, White
Mounting options: Graphite with vehicle specific straps, powder coated steel permanent mount (narrow or wide surface)
FEATURES
C˚ F˚
100K+
RATED
5
WARRANTY
LE SERIES TORRENT
GENERAL FEATURES
Single color w/ standard takedowns
Dual Color
Dual Color
• 3 progressive warning modes
• Utilize single or dual color modules to achieve maximum functionality
• Inboard modules are available in single color with 6 LEDs, or dual color
with 12 interleaved LEDs
•C
orner modules are available in single color with 12 LEDs, or dual color
with 12 interleaved LEDs
•D
ual color configured lightbars provide added usage options and
enhance standard features
•P
opulate the front-facing inboards with white as the secondary color
for a full front flood takedown light
•U
tilization of full, front-flood facilitates increased warning power by
deleting standard takedown module positions
•P
opulate the rear facing inboards with amber as the secondary color
for more effective traffic control
• 360° dual color, change bar color on the fly or alternate
between colors via user programmed color mode selection
•S
tandard LED takedowns can be positioned anywhere in the lightbar –
up to 4, front or rear facing
• 3 LED alley lights (optional)
• Available sizes: 35”, 40”, 44”, 49”, 54”, 59”
STANDARD FEATURES
•D
irectional / traffic control patterns, front / rear cutoff, manual low
power mode, flashing takedowns & alleys, flash
pattern change, program mode for user defined flash patterns
STOP / TAIL / TURN TORRENT
GENERAL FEATURES
Specifications vary by model. Contact your
Brooking representative for more information.
• 2 rear-facing light modules designated for brake and turn functionality
• Upgrade and adapt to border state’s color codes via dual color software
• Optional 6 LED work lights / takedowns (up to 4, front or rear facing)
• 3 LED alley lights (optional)
• Users choice flash modes: (whole bar, split, outside-in, criss-cross,
outside-in)
• Users choice flash pattern selection (10)
• Available sizes: 44”, 49”, 54”, 59”
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 33
ROOFTOP LIGHTBARS
ROOFTOP
LIGHTBARS
LEGION
LE SERIES LEGION
GENERAL FEATURES
•3
progressive warning modes
•L
ED takedown and alley lights (optional)
•S
tandard features: directional / traffic control patterns, front / rear
cutoff, manual low power mode, flashing takedowns & alleys,
flash pattern change, program mode for user defined flash patterns
•A
vailable LED colors: Amber, Blue, Red, White
•A
vailable sizes: 43”, 49”, 54”, 60”
STANDARD FEATURES
• Directional / traffic control patterns, front / rear cutoff, manual low
power mode, flashing takedowns & alleys, flash pattern change,
program mode for user-defined flash patterns
STOP / TAIL / TURN LEGION
GENERAL FEATURES
•2
rear-facing light modules designated for brake and
turn functionality
•O
ptional 6 LED work lights (up to 4, front or rear facing)
•A
lley lights optional
•U
sers choice flash modes: (front/back, side/side, criss/cross, whole bar
•T
raffic control patterns included at no additional charge
•A
vailable sizes: 43”, 49”, 54” 60”
FIT LEGION
GENERAL FEATURES
•A
n economical option with simplified functionality
(on/off, flash pattern change, low power)
•3
LED inboard modules – 6 LED corners
•S
ingle 4 wire harness includes battery direct power and ground,
warning & flash pattern change / low power mode
•A
vailable sizes: 24, 30", 36", 43”, 49”, 54” 60”
34 | B R O O K I N G I N D U S T R I E S .C O M
An economical, budget-friendly
option rife with features
COMMON FEATURES
•
•
•
•
•
•
•
•
High performance & cost competitive
Low-profile design
User friendly design for easy field maintenance – remove top panel
Black polycarbonate base wrapped around a rigid extruded aluminum spine
Lenses are UV stabilized, greatly reducing the yellowing and cracking associated with exposure to extreme temperatures
Inboard modules are 3 LED, corners are 6 LED
Available LED colors: Amber, Blue, Red, White
Mounting options: Graphite with vehicle specific straps, powder coated steel permanent mount (narrow or wide surface)
FEATURES
C˚ F˚
100K+
RATED
5
WARRANTY
STOP / TAIL / TURN
LEGION
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 35
DASH / DECK LIGHTING
DASH / DECK
TDSE4 - TITAN 4 LED DASH
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
Flash Patterns: 19
Input Voltage: 11 ~ 30 Vdc
Current Draw: 0.28A @ 12.8Vdc - 0.14A @ 25.6Vdc
LED Count: 4
Dimensions: 5.1"D x 1.77"H x 6.8"W (including mounting tabs)
Mount: Windshield / suction cups
Colors: Amber, Blue, Red, White & most split-color combinations
FEATURES
100K+
RATED
5
WARRANTY
BENEFITS
• Adjustable light module adapts to different windshield angles
• Multiple user-selectable flash patterns
TDXL6 - TITAN 6 LED DASH
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 19
Input Voltage: 11 ~ 30 Vdc
Current Draw: 0.46A @ 12.8Vdc - 0.24A @ 25.6Vdc
LED Count: 6
Dimensions: 5.1"D x 1.77"H x 6.8"W (including mounting tabs)
Certificates: SAE J595, CA Title 13
Mount: Windshield / suction cups
Colors: Amber, Blue, Red, White & most split-color combinations
FEATURES
100K+
RATED
5
WARRANTY
BENEFITS
• Adjustable light module adapts to different windshield angles
• Xtreme linear optics
36 | B R O O K I N G I N D U S T R I E S .C O M
DASH / DECK LIGHTING
MMAX204 8 LED DASH / DECK LIGHT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 26
Input Voltage: 24 Vdc
Current Draw: 0.6A @ 12 Vdc
LED Count: 8
Dimensions: 4.6"D (w/ shroud) x 1.54"H x 9.5"W
Certificates: SAE J595
Mount: Windshield / suction cups, headliner, side-mounted mini L brackets
Colors: Amber, Blue, Red, White and most combinations
FEATURES
100K+
RATED
5
WARRANTY
BENEFITS
• Alternative mounting options (headliner, side-mount suction cups, side-mount L brackets)
• Multiple user-selectable flash patterns
MMAX206 12 LED DASH / DECK LIGHT
GENERAL SPECIFICATIONS
•
•
•
•
•
•
•
•
Flash Patterns: 26
Input Voltage: 24 Vdc
Current Draw: 0.8A @ 12 Vdc
LED Count: 12
Dimensions: 4.6"D (w/ shroud) x 1.54"H x 9.5"W
Certificates: SAE J595
Mount: Windshield / suction cups, headliner, side mounted mini L brackets
Colors: Amber, Blue, Red, White and most combinations
FEATURES
100K+
RATED
5
WARRANTY
BENEFITS
• Alternative mounting options (headliner, side-mount suction cups, side-mount L brackets)
• Multiple user-selectable flash patterns
MBMMAX2H HEADLINER BRACKET
GENERAL SPECIFICATIONS
• Mount: Black powder-coated aluminum headliner bracket
BENEFITS
• Universal design allows for mounting in virtually any vehicle
• Opens up windshield for better visibility
• Height / angle adjustable
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 37
CONSOLES
BC-LBSK CONSOLE
CONSOLES
BC-LBSK CONSOLE
GENERAL SPECIFICATIONS
• Powder-coated steel construction
• Fits most larger vehicles (SUV, Pick-Up)
• Vehicle specific "saddle" bases available
FEATURES
•
•
•
•
Foam padded armrest
Large dual cup holders w/ plate
Optional side mount ticket book holder / pen holder
3-piece filler plate kit fills gaps caused by odd-sized equipment plates
BENEFITS
• Universal design fits most larger vehicles (SUV / Pick- Up)
• Adjustable height (front & rear)
• Indention on driver's side keeps armrest out of seating area, creating more space for the driver
38 | B R O O K I N G I N D U S T R I E S .C O M
CONSOLES
BD-DC2 CONSOLE
GENERAL SPECIFICATIONS
• Powder-coated steel construction
• Fits 2011 - 2017 Dodge Charger
• Mounts directly to PPV drive tunnel (Must have OEM bolts or OEM mounting base)
FEATURES
•
•
•
•
•
•
Side-mounted, height-adjustable, foam-padded armrest
Large dual cup holders w/ plate
Laptop stand plate that accommodates most manufacturer's stands
Mounts directly to PPV drive tunnel (Must have OEM bolts or OEM mounting base)
3-piece filler plate kit fills gaps caused by odd-sized equipment plates
Outlet plate for factory 12V & USB receptacles
BENEFITS
•
•
•
•
Replaces factory console
One-piece construction
Lower height between seats
Indention on rear driver's side keeps armrest out of seating area, creating more space for the driver
BD-DC2
CONSOLE
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 39
LIGHTING CONTROL
COMMON FEATURES OF 99 SERIES
DIGITAL SWITCH PANELS
• Self-performing diagnostics at power-up
99 SERIES
DIGITAL SMART
PANELS
The perfect LIGHTING CONTROL
solution for undercover units.
•D
igital switching facilitates faster accessory activation,
lower operating current & increased reliability
•W
alk-about test mode: Activate mode and each
button's zone activates for 5 seconds
• Silicone rubber push buttons
• LED backlighting for easy button recognition
• 60-title adhesive legend sheet
•2
-piece swivel mount bracket included with each unit
at no additional charge
• Console mounting plate available (sold separately)
BR-990 DIGITAL SMART PANEL (12V)
FEATURES
• 60A max output (10A per switch)
• Master switch programming: Assign buttons 2 thru 5 to operate in conjunction with button
# 1. Or program up to 4 buttons as momentary and 1 as an 8-second timed momentary
• Compact / slim design
Warranty: 5-year
BENEFITS
• Sleek design: 6.5"L x 2.5"H x 1.25"D
• Robust programming capability
BR-995 DIGITAL SMART PANEL (12V)
FEATURES
• 12A max output
• BR-RFT relay fuse table increases load per switch capability to 10A
• Upper 3 buttons can be configured to operate any combination of lower 6 buttons
• Program lower six buttons to mimic traffic control patterns (if applicable)
Warranty: 5-year
BENEFITS
• Sleek design: 6.5"L x 2.5"H x 2"D
• Robust programming capability
BR-997 DIGITAL PURSUIT SMART PANEL (12V)
FEATURES
•
•
•
•
•
12A max output
BR-RFT relay fuse table increases load per switch capability to 10A
Upper 3 buttons can be configured to operate any combination of lower 6 buttons
Program lower six buttons to mimic traffic control patterns (if applicable)
Hidden membrane switches for backlight dim and user choice (ex: timed gun lock)
Warranty: 5-year
BENEFITS
• Sleek design: 6.5"L x 2.5"H x 2"D
• Robust programming capability
40 | B R O O K I N G I N D U S T R I E S .C O M
LIGHTING CONTROL
MINI DIGITAL
CONTROLLER
SW-830 MINI DIGITAL CONTROLLER (10~24VDC)
FEATURES
•
•
•
•
•
•
18 silicone rubber push buttons (3 x 10A - 5 x 0.2A)
Program up to 8 buttons as momentary
LED backlighting
LED display mimics traffic arrow pattern
35-title adhesive legend sheet
Mounting options: Adjustable pedestal with suction cup for glass, or adhesive for dash /
flat surface
BENEFITS
• Compact Design
• Control Panel: 3.74"W x 2.7"H x 1"D
• Power Module: 4.4"W x 3.5"L x 1.05"D
BR-RFT
Boosts the amp load capability of the 995 or 997 to 20A per switch. Machine-crimped ends on both input and
output ease installation, and a capped, 40A in-line fuse provides added protection for accessories.
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 41
LIGHTING CONTROL
SWITCHBOXES
BR-935 SWITCHBOX
FEATURES
•
•
•
•
Three lighted rocker switches (15A))
(2) on / off - (1) momentary
2' wiring harness
Recesses in top of mounting plate allow for discreet under dash mount
Warranty: 3-year
BR-950 SWITCHBOX
FEATURES
•
•
•
•
•
•
5 lighted rocker switches (15A)
2' wire harness
Durable-powder-coated steel case
LED back-lit switch titles
60 title adhesive legend sheet with extra white tiles
Bail bracket and mounting hardware included
Dimensions: 6.25”L x 5” D x 2.25” H
Warranty: 3-year
42 | B R O O K I N G I N D U S T R I E S .C O M
LIGHTING CONTROL
BR-959J SWITCHBOX
FEATURES
•S
ix lighted rocker switches (15A) - Number 1-5 are two position (on/off),
#6 is three position (on/off/momentary)
• 2' wiring harness
• Durable, powder-coated steel case
• LED back-lit switch titles
• 60-title adhesive legend sheet w/ extra tiles
• Bail bracket and hardware included
Dimensions: 6.25”L x 5” D x 2.25” H
Warranty: 3-year
BR-960 SWITCHBOX
FEATURES
•
•
•
•
•
•
Six lighted rocker switches - Switch #1 (40A), 2-5 (15A)
2' wiring harness
Durable, powder-coated steel case
LED back-lit legend titles
60 title adhesive legend sheet w/ extra tiles
Bail bracket and hardware included
Dimensions: 6.25”L x 5” D x 2.25” H
Warranty: 3-year
BR-970S SWITCHBOX
FEATURES
•S
ix lighted rocker switches (15A) - Number 1-5 are two position (on/off),
#6 is three position (on/off/momentary)
• 3 mode progressive slide switch (40A)
• 2' wiring harness
• Durable, powder-coated steel case
• LED back-lit legend titles
• 60-title adhesive legend sheet
• Bail bracket and hardware included
Dimensions: 6.25”L x 5” D x 2.25” H
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 43
LIGHTING CONTROL
CONSOLE
SWITCH PLATES
SP-970S SWITCH PLATE
FEATURES
• Six-lighted rocker switches (15A) - Number 1-5 are two position (on/off),
#6 is three position (on/off/momentary)
• 3 mode progressive slide switch (40A)
• In-line auto-resetting relay (40A)
• 2' wiring harness
• Durable, powder-coated steel plate
• LED back-lit legends
• 60-title adhesive legend sheet
• Fits most major manufacturer's consoles
• Dimensions: 8.56"L x 3"H
Warranty: 3 year
SP-6SW2O SWITCH PLATE
FEATURES
•
•
•
•
•
•
•
•
•
Six-lighted rocker switches (15A)
Two independently switched 12V receptacles w/ rubber covers
Attached rubber covers keep receptacles clear of liquids and debris
2' wiring harness
Durable, powder-coated steel plate
LED back-lit switch titles
60-title adhesive legend sheet
Fits most major manufacturer's consoles
Dimensions: 8.56"L x 3"H
Warranty: 3 year
SP-10SW SWITCH PLATE
FEATURES
•
•
•
•
•
•
•
•
Ten-lighted rocker switches (15A)
Also available in 6 and 8 switch model
2' wiring harness
Durable, powder-coated steel plate
LED back-lit switch titles
60-title adhesive legend sheet
Fits most major manufacturer's consoles
Dimensions: 8.56"L x 3"H
Warranty: 3 year
44 | B R O O K I N G I N D U S T R I E S .C O M
LIGHTING CONTROL
SP-6SWC SWITCH PLATE
FEATURES
•
•
•
•
•
•
•
•
SP-3SWC2O SWITCH PLATE
Six-lighted Carling-style switches (25A)
Larger Carling-style switches promote easier recognition and more precise operation
2' wiring harness
Durable, powder-coated steel plate
LED back-lit switch titles
60-title adhesive legend sheet
Fits most major manufacturer's consoles
Dimensions: 8.56"L x 3"H
Warranty: 3 year
FEATURES
•
•
•
•
•
•
•
•
•
•
Three-lighted Carling-style switches (25A)
Larger Carling-style switches promote easier recognition and more precise operation
Two constant hot (+) 12V receptacles
Attached rubber covers keep receptacles clear of liquids and debris
2' wiring harness
Durable, powder-coated steel plate
LED back-lit switch titles
60-title adhesive legend sheet
Fits most major manufacturer's consoles
Dimensions: 8.56"L x 3"H
Warranty: 3 year
SP-4SWCMUSB SWITCH PLATE
FEATURES
•
•
•
•
•
•
•
•
•
•
•
Four-lighted Carling-style switches (25A)
Larger Carling-style switches promote easier recognition and more precise operation
One push button momentary
Two constant hot (+) USB ports
Attached rubber cover keeps ports clear of liquids and debris
2' wiring harness
Durable, powder-coated steel plate
LED back-lit switch titles
60-title adhesive legend sheet
Fits most major manufacturer's consoles
Dimensions: 8.56"L x 3"H
Warranty: 3 year
SP-9SWC3O SWITCH PLATE
FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
Six-lighted Carling-style switches (25A)
3-mode, progressive slide switch (40A)
In-line auto-resetting relay (40A)
Three independently switched 12V receptacles (lighted rocker switches)
Receptacles protected by 15A in-line fuse
Attached rubber covers keep receptacles clear of liquids and debris
2' wiring harness
Durable, powder-coated steel plate
LED back-lit switch titles
60-title adhesive legend sheet
Fits most major manufacturer's consoles
Dimensions: 8.56"L x 5"H
Warranty: 3 year
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 45
FLASHERS
PLUG & PLAY
HEADLIGHT FLASHERS
Brooking has the capability to customize these
FLASHERS to meet specific flash rates per minute.
Contact an associate for more information.
FL-41U-1 HEADLIGHT FLASHER
GENERAL SPECIFICATION
• Vehicle make: 2016+ Ford Explorer
• Input Voltage: 12Vdc
•F
lash rates: #1: Single wig-wag (240 FPM) | #2 Single wig-wag (400 FPM) | #3 Double wig-wag left/left right/right
(400 FPM) | #4 Single wig-wag 4X - simultaneous left/right 2X | #5 Cycle #1 thru #4
FL-4OFIFM HEADLIGHT FLASHER
GENERAL SPECIFICATION
• Vehicle make: 2013+ Ford Sedan | 2013 ~ 2015 Ford Explorer
• Input Voltage: 12Vdc
•F
lash rates: #1: Single wig-wag (240 FPM) | #2 Single wig-wag (400 FPM) | #3 Double wig-wag left/left right/right
(400 FPM) | #4 Single wig-wag 4X - simultaneous left/right 2X | #5 Cycle #1 thru #4
FL-5OHIFDC15 HEADLIGHT FLASHER
GENERAL SPECIFICATION
• Vehicle make: 2015+ Dodge Charger
• Input Voltage: 12Vdc
•F
lash rates: #1: Single wig-wag (240 FPM) | #2 Single wig-wag (400 FPM) | #3 Double wig-wag left/left right/right
(400 FPM) | #4 Single wig-wag 4X - simultaneous left/right 2X | #5 Cycle #1 thru #4
FL-CTF DRL FLASHER
GENERAL SPECIFICATIONS
•
•
•
•
Vehicle make: 2008+ Chevrolet Tahoe
100% Solid State, encapsulated design for long-lasting, reliable performance
High beam / brake / turn signal override
Flashes both front and rear DRL's
46 | B R O O K I N G I N D U S T R I E S .C O M
FLASHERS
COMMON FEATURES OF HEADLIGHT FLASHERS
•
•
•
•
•
•
•
•
•
•
•
Plug & Play installation - no cutting of factory wires
Plugs directly into OEM headlights - no additional factory options necessary
Bypasses vehicle's body control modules and Can BUS system
Four user-selectable wig-wag flash rates
Auxiliary lead provides power for other nearby accessory lighting
Compatible with both PPVs and civilian model vehicles
Ideal for undercover / unmarked vehicles
Easily transferrable
100% solid-state, encapsulated design for long-lasting, reliable performance
Corrosion-proof ABS housing
High beam override
FL-5OHIFDC15
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 47
FLASHERS
FL-8ORFIP-2 BRAKE PANEL / TAILLIGHT
PLUG & PLAY
TAILLIGHT
FL-8ORFIP-2 BRAKE PANEL / TAILLIGHT FLASHER
GENERAL SPECIFICATIONS
• Vehicle make: 2015+ Dodge Charger
• Input Voltage: 12Vdc
•F
lash rates: #1: Single wig-wag (240 FPM) | #2 Single wig-wag (400 FPM) | #3 Double wig-wag left/left
right/right (400 FPM) | #4 Single wig-wag 4X - simultaneous left/right 2X | #5 Cycle #1 thru #4
FEATURES
• Flashes entire 3-piece rear brake panel and tail lights - outer brake panel ring alternates with brake lights
FL-8ORFID-2 BRAKE PANEL / TAILLIGHT FLASHER
GENERAL SPECIFICATIONS
• Vehicle make: 2014+ Dodge Durango
• Input Voltage: 12Vdc
•F
lash rates: #1: Single wig-wag (240 FPM) | #2 Single wig-wag (400 FPM) | #3 Double wig-wag left/left
right/right (400 FPM) | #4 Single wig-wag 4X - simultaneous left/right 2X | #5 Cycle #1 thru #4
48 | B R O O K I N G I N D U S T R I E S .C O M
FLASHERS
COMMON FEATURES OF TAILLIGHT FLASHERS
• Plug & Play installation - no cutting of factory wires
•
•
•
•
•
•
•
•
•
•
Plugs directly into OEM taillights - no additional factory options necessary
Four-user selectable wig-wag flash rates
Auxiliary lead provides power for other nearby accessory lighting
Compatible with both PPVs and civilian model vehicles
Ideal for undercover / unmarked vehicles
No cutting of factory wires required
Bypasses vehicle's body control modules and Can BUS system
100% solid-state, encapsulated design for long-lasting, reliable performance
Corrosion-proof ABS housing
Brake & turn signal override - Activation of either disables / overrides flashing
FL-2ORFIF-S TAILLIGHT FLASHER
GENERAL SPECIFICATIONS
• Vehicle make: 2013+ Ford Sedan
• Input Voltage: 12Vdc
• Flash rates: #1: Single wig-wag (240 FPM) | #2 Single wig-wag (400 FPM) | #3 Double wig-wag left/left right/right
(400 FPM) | #4 Single wig-wag 4X - simultaneous left/right 2X | #5 Cycle #1 thru #4
FL-2ORFIF-U TAILLIGHT FLASHER
GENERAL SPECIFICATIONS
• Vehicle make: 2013+ Ford Explorer
• Input Voltage: 12Vdc
•F
lash rates: #1: Single wig-wag (240 FPM) | #2 Single wig-wag (400 FPM) | #3 Double wig-wag left/left right/right
(400 FPM) | #4 Single wig-wag 4X - simultaneous left/right 2X | #5 Cycle #1 thru #4
FL-2ORFIF-U
TAILLIGHT
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 49
PRISONER TRANSPORT
RWB-DC2:
WINDOW BARS
PRISONER
WINDOW BARS
RWB-DC2: 2011+ DODGE CHARGER
RWB-FIS: 2013+ FORD INTERCEPTOR SEDAN
RWB-FIU: 2015+ FORD EXPLORER
RWB-CT: 2007-14 CHEVROLET TAHOE
RWB-CT2: 2015+ CHEVROLET TAHOE (COMING SOON)
GENERAL SPECIFICATIONS
• 11-gauge, powder-coated steel
FEATURES
•
•
•
•
•
•
Horizontal bar design for better visibility
Aids in reducing expensive kick-outs from within the vehicle
Horizontal bars accommodate various surface mount LED lightheads
Provides increased safety for officers and civilians alike
One piece design facilitates quick installation, reducing vehicle downtime
Clean, finished look
Warranty: 2-year
50 | B R O O K I N G I N D U S T R I E S .C O M
PRISONER TRANSPORT
DOOR PANEL COVERS
DP-DC2: 2011+ DODGE CHARGER
DP-FIS: 2013+ FORD INTERCEPTOR SEDAN
DP-FIU: 2013+ FORD EXPLORER
DP-CT2: 2015+ CHEVROLET TAHOE (COMING SOON)
GENERAL SPECIFICATIONS
• Vacuum-formed, UV-stabilized, flame-retardant ABS plastic
FEATURES
•V
acuum-formed to match the exact contour of factory door panel,
preserving the factory OEM look.
• Protects factory finishings / reduces tampering
• Eliminates time and space-consuming storage of factory door panels
• Quick and easy installation
Warranty: 2-year
TRANSPORT SEATS
VS-DC2: 2011+ DODGE CHARGER
VS-FIS: 2013+ FORD INTERCEPTOR SEDAN
VS-FIU: 2015+ FORD EXPLORER (FITS OVER FACTORY SEAT & SEAT BACK)
VS-CT2: 2015+ CHEVROLET TAHOE (COMING SOON)
GENERAL SPECIFICATIONS
• 1/4" vacuum-formed, UV-stabilized, flame-retardant ABS plastic
FEATURES
VS-FIU Transport Seat Cover
• Reduce the risks associated with stashing of contraband by perpetrator
• Each seat is cut using a C&C program ensuring the perfect fit every time
• VS-FIU and CT2 cover the factory seat. No removal or storage of factory
parts necessary
• Facilitates safer, easier clean up
• More resistant to pathogens and biohazards than factory seats when
cleaned regularly
• Aids in preservation of vehicle's value
• Pre-drilled mounting holes located in areas free of factory wire harnesses
and / or gas tank
• Utilizes factory seat belt system or use optional PT-SBE seat belt extenders
Warranty: 2-year
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 51
ACCESSORIES
OUTLET BOXES
BR-930 OUTLET BOX (12V)
GENERAL SPECIFICATIONS
• ABS plastic housing / case
• 15A per outlet
• 4.5"L x 1.5"H x 2"D
FEATURES
•
•
•
•
Three 12V DC receptacles
Lighted on/off switch controls all accessory ports
Attached rubber covers help keep receptacles free and clear of debris and/or liquids
Mounting holes extend through the plastic housing allowing for easier mounting
in tight spaces
• Receptacles protected by a 15A in-line fuse
• 3' wire harness
• Mounting screws included
Warranty: 3-year
BR-930-USB OUTLET BOX (12V)
GENERAL SPECIFICATIONS
• ABS plastic housing / case
• 15A per outlet | 2.1A USB ports
• 4.5"L x 1.5"H x 2"D
FEATURES
•
•
•
•
Two 12V DC receptacles and two USB ports
Lighted on/off switch activates all accessory ports
Attached rubber covers help keep receptacles free and clear of debris and/or liquids
Mounting holes extend through the plastic housing allowing for easier mounting
in tight spaces
• Receptacles protected by a 15A in-line fuse
• 3' wire harness
• Mounting screws included
Warranty: 3-year
OP-53O2 USB OUTLET PLATE (12V)
FEATURES
•
•
•
•
•
•
Two constant hot (+) USB ports
Three constant hot (+) 12V receptacles
Receptacles / ports protected by 15A in-line fuse
Attached rubber covers keep receptacles clear of liquids and debris
Powder-coated steel plate
Dimensions: 8.56"L x 2"H
Warranty: 3-year
52 | B R O O K I N G I N D U S T R I E S .C O M
ACCESSORIES
Promote your business, add your
logo / company information with
reasonable minimums. Contact a
Brooking associate for more details.
BR-930W OUTLET BOX (12V)
GENERAL SPECIFICATIONS
• ABS plastic housing / case
• 15A per outlet
• 6"L x 1.5"H x 2.25"D (length includes mounting flanges, depth includes circuit breaker)
FEATURES
•
•
•
•
Constant hot (delete on/off switch)
3 constant hot 12V DC receptacles
Attached rubber covers help keep receptacles free and clear of debris and/or liquids
Mounting holes extend through the plastic housing allowing for easier mounting
in tight spaces
• Receptacles protected by a 15A auto-resetting ciruit breaker
• 3' wire harness
• Mounting screws included
Warranty: 3-year
BR-930WP OUTLET BOX (12V)
GENERAL SPECIFICATIONS
• ABS plastic housing / case
• 15A per outlet
• 6"L x 1.5"H x 2.25"D (length includes mounting flanges)
FEATURES
•
•
•
•
Three 12V DC receptacles
Powered via fused 12V DC cigar plug
Attached rubber covers help keep receptacles free and clear of debris and/or liquids
Mounting holes extend through the plastic housing allowing for easier mounting
in tight spaces
• Receptacles protected by a 15A fuse (in plug)
• 3' cigar plug cord
• Mounting screws included
Warranty: 3-year
OP-4O OUTLET PLATE (12V)
FEATURES
•
•
•
•
•
•
Four constant hot (+) USB ports
Four constant hot 12Vdc receptacles
Receptacles protected by 15A in-line fuse
Attached rubber covers keep receptacles clear of liquids and debris
Powder-coated steel plate
Dimensions: 8.56"L x 2"H
Warranty: 3-year
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 5 3
ACCESSORIES
CIRCUIT BREAKERS
CB-50, 100 & 150 MANUAL RESET CIRCUIT BREAKERS
FEATURES
• Available in 50A, 100A & 150A
• Manual "trip" button allows the user to manually trip the breaker
• Indicator lever provides clear visual indication of a tripped condition
saving valuable time when troubleshooting an open circuit
• Rubber stud covers
GENERAL SPECIFICATIONS
•
•
•
•
Operating temperature: -25°F to 180°F.
Storage temperature: -30°F to 300°F.
Splash and dust-proof.
Stud size 1/4", 28 threads per inch.
POWER DISTRIBUTION PANEL
PDP-13 POWER DISTRIBUTION PANEL
FEATURES
•
•
•
•
•
•
•
•
•
•
54 | B R O O K I N G I N D U S T R I E S .C O M
Maximum Load (panel): 100 AMP
Maximum Load (per circuit): 30A
Operating Voltage: 12V DC
5 Battery Power Circuits
5 Ignition Power Circuits
3 Timed Circuits
Timer Presets - .5 hr, 1 hr, 2hrs, 4hrs
8 Ground Studs
Fuse Indicator LED - turns on when there is an open circuit or blown fuse
Timed Circuit LED - LED flashes during power shut-off countdown
ACCESSORIES
FUSE BLOCKS
FP**-PLC FUSE BLOCK W/ LED FUSE STATUS INDICATORS
FEATURES
•
•
•
•
•
Available in 4, 6 & 10 gang
Red LED's indicate blown fuse
Clear, poly snap-on cover for extra protection against water spray, dust and debris
1/4" stud for power feed
.250" male quick-disconnect terminals
GENERAL SPECIFICATIONS
• Input voltage: 10 ~ 32 Vdc
• Max 30A per circuit / 100A per panel
FP**-GPC FUSE BLOCK WITH GROUND PAD
FEATURES
• Available in 8, 10 & 12 gang
• Easy wiring with 1/4" quick connect branch circuit terminal and stud common ground or
1/4" quick connect if preferred
• Clear poly snap-on cover for extra protection against water spray, dust and debris
• 1/4" stud for power feed
• .250" male quick-disconnect terminals
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 5 5
OVERHEAD LED DOME LIGHT
PL-RWO DOME LIGHT
FEATURES
• Choose red or white illumination mode.
• Color modes are on each side of the 3-position on/off switch, allowing
activation of either without cycling through the other.
• Red mode is less visible from outside the vehicle, aiding in officer /
driver safety, while also reducing eye fatigue.
• Dimensions: 6.34" Diameter x 1"H
HARD SEAT ORGANIZER
BR-017 SEAT ORGANIZER
FEATURES
•
•
•
•
•
56 | B R O O K I N G I N D U S T R I E S .C O M
Blow-molded, low-density polyethylene material
Supplies stay secure even at high speeds
Secures forms, maps, flashlights, handcuffs and other equipment for fast, easy access
Adjustable brackets fit virtually any seat
Built in handle allows for easy transport
BODY ARMOR HANGER
BR-BAH BODY ARMOR HANGER
FEATURES
• Hang drying aids in preservation of body armor / ballistic vests,
greatly reducing unpleasant odor and / or mold growth
• Heavy-duty swivel hanging hook
• Hooked hanger ends prevent slippage
• Hanging tab for duty belt
• Constructed of high-impact ABS plastic
TACTICAL BAG INSERT
BR-TBI TACTICAL BAG INSERT
FEATURES
• Low-density, polyethylene material
• 19"L x 7"W x 9.5"H
• Divider panels create separate cavities, keeping contents
better organized & protected
• Helps bag stand upright
E M E R G E N C Y V E H I C L E E Q U I P M E N T- 20 17 | 5 7
Your Emergency Vehicle Equipment Super Source
104 Liberty Center Place
St. Augustine, FL 32093
888.493.1925
www.brookingindustries.com
Brooking Industries' roots trace back to Lexington, KY. In 1985, we established a relationship with the nation's largest
public safety equipment retailer, for whom Brooking developed and produced a privately labeled line of switchboxes and
accessories. Over the years, Brooking expanded its manufacturing capabilities by partnering with a thermoplastics engineer, and developing a line of prisoner transport equipment that is now recognized as the best fitting and most affordable
line in the industry. By 1995 Brooking had established its own direct-purchasing customer base in the southeastern United
States, and became known as a reliable supplier with favorable pricing, lead times, and personalized customer service.
By the new millennium, Brooking's O.E.M.-type projects (custom wiring harnesses, etc.) facilitated penetration into other
markets, but the primary focus remained in the emergency vehicle realm. It was at this time that Brooking, driven by the
desire to become a "one-stop shop," decided to round out its offerings by introducing a lighting line that has become widely
known as a superior option compared to other lighting manufacturer products. The latest contribution Brooking has to offer
the emergency vehicle marketplace is an innovative and rapidly growing line of plug & play headlight and taillight flashers.
These innovations, along with the prisoner transport equipment, lighting, and lighting control options, have allowed Brooking
to supply effective and affordable options that are supported by industry standard (or better) warranties with personable
customer service. When you partner with Brooking you are not a number, you are part of the family. Welcome aboard.
YOUR LOCAL DEALER
888.493.1925 | WWW.BROOKINGINDUSTRIES.COM
Download PDF

advertising