Style and innovation for the retail, corporate and public sectors

Style and innovation for the retail, corporate and public sectors
Display Systems range and technical guide
Issue number 9
INTRODUCTION & CONTENTS
Welcome to the best in European display
We are delighted to present the latest ranges of high
Contents
Sign Connections
quality display systems, manufactured in the United
Kingdom to ISO 9001-2009 standards. This new-look
range and ordering guide details the latest innovations in
cable and rod systems, sign fixings, acrylics, lighting and
the Freestanders modular display system.
In addition, we can offer a custom fabrication service,
1.5mm cable
3mm cable
Cable accessories
6mm rod
embracing virtually any display project that demands
design and manufacturing expertise in timber, metal and
10mm rod
acrylic. If you know what you want, but not how to get it,
please contact us (see back cover for details). Our friendly
Rod accessories
and knowledgeable sales staff will be pleased to advise
you about the very best ways to present your organization
to the audiences who matter most.
Acrylic fabrication
Display lighting
Freestanders
Frameless
Easi Fix
SIGN CONNECTIONS
Sign Connections is a versatile range of sign fixings,
carefully manufactured in the UK to very high standards.
An extensive choice of durable finishes enables eye
catching design details to be added quickly and easily to
many different signage styles. Specific corporate
requirements can be met with special powder coat or
anodised finishes.
You can opt to configure and install your system, or use
our design and installation service, if you prefer. In both
cases, you will benefit from unsurpassed quality, with a
one-year guarantee against defects.
SIGN CONNECTIONS
Flush mount button fixing
30mm Through hole panel support
For up to 10mm panel thickness.
Panels require 5mm ø holes.
Code: 6533
Size: 12mm ø
Finishes: SA/BA/STA/PS/SS
For 2-12mm panel thickness.
Panels require 15mm ø holes.
Code: 6628
Size: 30mm ø, 25mm standoff
Finishes: SA/BA/STA/PS/SS
Flush mount button fixing
Flush mount button fixing
For up to 10mm panel thickness.
Panels require 5mm ø holes.
Code: 6534
Size: 19mm ø
Finishes: SA/BA/STA/PS/SS
30mm Through hole panel support
For 2-12mm panel thickness.
Panels require 15mm ø holes.
Code: 6531
Size: 30mm ø, 50mm standoff
Finishes: SA/STA/PS/SS
19mm Button
M4 tapped hole to rear face.
Code: 6517
Size: 19mm ø
Finishes: SA/BA/STA
Through hole panel support
30mm Through hole panel support
For 2-12mm panel thickness.
Panels require 15mm ø holes.
Code: 6532
Size: 30mm ø, 100mm standoff
Finishes: SA/STA/PS/SS
12mm Through hole panel support
For 2-12mm panel thickness.
Panels require 9mm ø holes.
Code: 6523
Size: 12mm ø, 20mm standoff
Finishes: SA/BA/STA/PS/SS
Button
Rubber washer
Code: RW19
Size: 19mm ø
Finishes: Black
19mm Through hole panel support
For 2-12mm panel thickness.
Panels require 12mm ø holes.
Code: 6624
Size: 19mm ø, 25mm standoff
Finishes: SA/BA/STA/PS/SS
19mm Through hole panel support
Rubber washer
For 2-12mm panel thickness.
Panels require 12mm ø holes.
Code: 6627
Size: 19mm ø, 50mm standoff
Finishes: SA/BA/STA/PS/SS
Code: RW30
Size: 30mm ø
Finishes: Black
When ordering, insert a forward slash after the
code, followed by the finish code. e.g. 6011/SA.
1
SIGN CONNECTIONS
Through hole panel support
Silver anodised
aluminium Finish code SA
Brass anodised
aluminium Finish code BA
Stainless anodised
aluminium Finish code STA
Mirror polished stainless
steel Finish code PS
Satin polished stainless
steel Finish code SS
SIGN CONNECTIONS
Wall mounted side grip panel support
Wall/ceiling panel grip
For up to 3mm panel thickness.
Code: 6520
Size: 19mm ø with 25mm standoff
Finishes: SA/BA/STA
For up to 5mm panel thickness.
Code: 6535
Size: 12mm ø
Finishes: SA/BA/STA
Wall panel grip
Wall/ceiling panel grip
Wall mounted side grip panel support
For up to 8mm panel thickness.
Supplied with nylon tipped screw.
Code: 6521
Size: 19mm ø
Finishes: SA/BA/STA
For up to 6mm panel thickness.
Code: 6522
Size: 19mm ø with 25mm standoff
Finishes: SA/BA/STA
Wall/ceiling panel grip
Wall mounted side grip panel support
Wall mounted side grip panel support
THE FINISHING TOUCH
Ceiling panel grip
Most components pictured have a Silver Anodised
finish, but many are available in any of the three
finishes detailed below.
For up to 6mm panel thickness.
Code: 6529
Size: 30mm ø with 20mm standoff
Finishes: SA/BA/STA
SA (Silver Anodised)
is a popular choice for many users,
as it combines the practicality and
versatility they require in constantly changing retail
environments.
BA (Brass Anodised)
is usually chosen for traditional
settings.
Wall mounted side grip panel support
For up to 12mm panel thickness.
Code: 6530
Size: 30mm ø with 20mm standoff
Finishes: SA/BA/STA
Wall mounted side grip panel support
When ordering, insert a forward slash after the
code, followed by the finish code. e.g. 6011/SA.
For up to 12mm panel thickness.
Supplied with nylon tipped screw.
Code: 6526
Size: 25mm ø
Finishes: SA/BA/STA
Silver anodised
Finish code SA
Brass anodised
Finish code BA
STA (Stainless Steel Anodised)
is increasingly the finish of choice for
architects and interior designers.
It could be said that stainless steel is ‘the new black’.
Stainless anodised
Finish code STA
SIGN CONNECTIONS
2
SIGN CONNECTIONS
19mm ø 4-way panel connector
19mm ø double panel support
19mm ø 4-way
For between 4-8mm panels. For use with 6624/6627.
Code: 6631
Size: 19mm ø
Finishes: SA/STA
With 10mm spacer to accept 2 no. 3-8mm panels.
Panels require 12mm ø holes.
Code: 6633
Size: 19mm ø with 25 + 10mm standoff
Finishes: SA/STA
30mm ø 4-way
19mm ø double panel support
19mm ø 2-way panel connector
With 20mm spacer to accept 2 no. 3-8mm panels.
Panels require 12mm ø holes.
Code: 6634
Size: 19mm ø with 25 + 20mm standoff
Finishes: SA/STA
For between 4-8mm panels. For use with 6624/6627.
Code: 6632
Size: 19mm ø
Finishes: SA/STA
INSTALLATION TIP
30mm ø 4-way panel connector
ab
ab
For between 4-10mm panels. For use with 6628/6531/6532.
Code: 6638
Size: 30mm ø
Finishes: SA/STA
Dimension from edge of panel
to hole centre
6631 – 5.0mm (a)
6638 – 6.5mm (b)
30mm ø 2-way
ab
30mm ø 2-way panel connector
ab
For between 4-10mm panels. For use with 6628/6531/6532.
Code: 6639
Size: 30mm ø
Finishes: SA/STA
19mm ø double panel support
When ordering, insert a forward slash after the
code, followed by the finish code. e.g. 6011/SA.
3
SIGN CONNECTIONS
Silver anodised
Finish code SA
Stainless anodised
Finish code STA
Dimension from edge
of panel to hole centre
6632 – 7.5mm (a)
6639 – 9.5mm (b)
Fully assemble and secure bottom two supports.
Locate panel between them before securing top two
supports for easy installation.
This fully customised solution display was designed and manufactured for the
Isaac Newton Centre in London. Based on the Sign Connections range, the static
display comprises stainless steel components with a 200mm standoff, which
support special acrylic pockets containing replaceable graphics. The Centre’s
plasma screen is flush mounted in the centre of the display and two sidepieces
give continuity with the wall.
Glass shelves mounted floor to ceiling on stainless steel cable make an
eye-catching window display and offer a useful means of presenting products at
Steve Hilliard Hairdressing.
1.5MM CABLE
Combining strength with subtlety, 1.5mm cable is the
acknowledged favourite of many customers. The stainless
steel cable is complemented by anodised aluminium
components, available from stock in silver, brass and
stainless steel effect finishes. In common our other cable
and rod systems, the very wide choice of components
confers almost limitless design possibilities.
You can opt to configure and install your system, or use
our design and installation service, if you prefer. In both
cases, you will benefit from unsurpassed quality, with a
one-year guarantee against defects.
1.5MM CABLE COMPONENTS
Kit for fixing between floor and ceiling
Hanging kit for 3mm panel
Comprises: 19mm ø ceiling - floor fixing with 4M x 1.5mm ø
stainless steel cable and tensioner. Allen key and fixing screws
supplied.
Code: 6000
Finishes: SA/BA/STA
Comprises: 19mm ø top fixing and hanging support,
2M x 1.5mm ø stainless steel cable.
Allen key and fixing screw supplied.
Code: 6003
Finishes: SA/BA/STA
6040 kit
6000 kit
Ceiling, floor or wall mounted kit
Comprises: 40mm ø top and bottom swivel rose with 4M x
1.5mm ø stainless steel cable and tensioner.
Allen key and fixing screws supplied.
Code: 6005
Finishes: SA/BA/STA
Hanging kit for 6mm panel
6022 kit
Comprises: 19mm ø top fixing and hanging support,
2M x 1.5mm ø stainless steel cable.
Allen key and fixing screw supplied.
Code: 6004
Finishes: SA/BA/STA
Floor to ceiling track mounted kit
Comprises: 19mm ø top and bottom sliding track fixings with
4M x 1.5mm ø stainless steel cable and tensioner.
Allen key supplied.
Code: 6040
Finishes: SA/STA
INSTALLATION TIP
Wall mounted track kit
6005 kit
Comprises: Angled top and and bottom sliding track fixings
with 4M x 1.5mm dia. stainless steel cable
and tensioner. Allen key supplied.
Code: 6045
Finishes: SA/STA
6045 kit
6003/6004 kit
The dimension shown
remains the same,
irrespective of the panel size.
Wall mount shelf kit
Comprises: 40mm ø top and bottom swivel rose, 225mm
long distance rod, 2 x 4M lengths of 1.5mm ø cable.
Allen key and fixing screws supplied.
Code: 6022
Finishes: SA/BA/STA
When ordering, insert a forward slash after the
code, followed by the finish code. e.g. 6011/SA.
1
1.5MM CABLE
Silver anodised
Finish code SA
6014/SA fixing track
Brass anodised
Finish code BA
Stainless anodised
Finish code STA
When using 1.5mm cable, the distance between the cable
centre and the edge of the panel should be 7.5mm.
If using swivel supports (6018/6019), this dimension is
increased to 12.5mm.
1.5MM CABLE COMPONENTS
Slimline side grip
Twin side grip
For up to 4mm panel.
Code: 6011
Size: 12mm ø
Finishes: SA/BA/STA
For up to 3mm panel.
Code: 6008
Size: 19mm ø
Finishes: SA/BA/STA
Slimline side grip
Slimline twin side grip
Twin side grip
Slimline twin side grip
For up to 4mm panel.
Code: 6012
Size: 12mm ø
Finishes: SA/BA/STA
For up to 6mm panel.
Code: 6068
Size: 19mm ø
Finishes: SA/BA/STA
Swivel side grip
Side grip
Swivel side grip
For up to 3mm panel.
Code: 6006
Size: 19mm ø
Finishes: SA/BA/STA
For up to 6mm panel.
Code: 6018
Size: 19mm ø
Finishes: SA/BA/STA
Track mounted cable kit
Side grip
Twin swivel side grip
Side grip
For up to 6mm panel.
Code: 6066
Size: 19mm ø
Finishes: SA/BA/STA
Cable frame support
For up to 6mm panel.
Code: 6019
Size: 19mm ø
Finishes: SA/BA/STA
Side grip
Cable frame support
For up to 10mm panel.
Requires AK5 allen key
Code: 6016
Size: 19mm ø
Finishes: SA/BA/STA
Code: 6186
Size: 19mm ø
Finishes: SA/BA/STA
When ordering, insert a forward slash after the
code, followed by the finish code. e.g. 6011/SA.
Silver anodised
Finish code SA
Brass anodised
Finish code BA
Stainless anodised
Finish code STA
1.5MM CABLE
2
1.5MM CABLE COMPONENTS
Shelf support
Banner pole
Shelf requires a 9mm ø hole.
Code: 6007
Size: 19mm ø
Finishes: SA/BA/STA
Includes two end supports and 15mm ø
aluminium tube. Up to 1M long. Sizes over 1M P.O.A.
Code: 6020
Size: 15mm ø
Finishes: SA/STA
Banner pole
Shelf support
Shelf grip
For up to 6mm thickness.
Supplied with nylon tipped grubscrew.
Code: 6010
Size: 19mm ø
Finishes: SA/BA/STA
Hanging rail
Includes two end caps and universal grips.
Up to 1250mm long.
Code: 6013
Size: 25mm ø
Finishes: Chrome plated/stainless steel
Shelf grip
For up to 8mm thickness.
Supplied with nylon tipped grubscrew.
Code: 6080
Size: 19mm ø
Finishes: SA/BA/STA
Crossover support
For a 6mm horizontal rod between cables.
Code: 6077
Size: 19mm ø
Finishes: SA/BA/STA
Twin shelf grip
Through hole panel support
For up to 6mm thickness. Supplied
with nylon tipped grubscrew.
Code: 6026
Size: 19mm ø
Finishes: SA/BA/STA
Stainless steel rod
Through hole panel support
Shelf grip
For 3mm to 10mm panel thickness.
Panels require 12mm ø holes.
Code: 6087
Size: 19mm ø
Finishes: SA/BA/STA
Flush ends.
Code: 4506 (500mm), 4507 (1000mm),
4508 (1500mm)
Size: 6mm ø
Finishes: Stainless steel
Twin through hole panel support
Decorative aluminium end cap
For 3mm to 10mm panel thickness.
Panels require 12mm ø holes.
Code: 6088
Size: 19mm ø
Finishes: SA/BA/STA
For 6mm rod.
Code: 4504
Size: 15mm ø
Finishes: SA/BA/STA
When ordering, insert a forward slash after the
code, followed by the finish code. e.g. 6011/SA.
3
1.5MM CABLE
Silver anodised
Finish code SA
Brass anodised
Finish code BA
Stainless anodised
Finish code STA
3MM CABLE
Our 3mm cable range is designed for use in heavy-duty
display applications, where the flexibility and particular
visual appeal of stainless steel cable is still required. As
with 1.5mm cable, a very wide choice of anodised
aluminium components is available from stock in silver,
brass and stainless steel effect finishes.
You can opt to configure and install your system, or use
our design and installation service, if you prefer. In both
cases, you will benefit from unsurpassed quality, with a
one-year guarantee against defects.
3MM CABLE COMPONENTS
Kit for fixing between floor and ceiling
Track mounted cable kit
Comprises: 19mm ø ceiling and floor fixings with 4M 3mm ø
stainless cable and tensioner.
Allen key and fixing screws supplied.
Code: 6300
Finishes: SA/BA/STA
Comprises: 19mm ø top and bottom slide track fixings with
4M 3mm ø stainless cable and tensioner.
Allen key supplied.
Code: 6340
Finishes: SA/STA
6340 kit
Ceiling, floor or wall mounted kit
Side grip
Comprises: 40mm ø top and bottom rose with 4M 3mm ø
stainless cable and tensioner.
Allen key and fixing screws supplied.
Code: 6305
Finishes: SA/BA/STA
For up to 6mm panel.
Code: 6366
Size: 19mm ø
Finishes: SA/BA/STA
6300 kit
Twin side grip
For up to 6mm panel.
Code: 6368
Size: 19mm ø
Finishes: SA/BA/STA
INSTALLATION TIP
6305 kit
Swivel side grip
Side grip
Except when using swivel
supports 6318 or 6319.
This will increase to
12.5mm each side.
For up to 6mm panel.
Code: 6318
Size: 19mm ø
Finishes: SA/BA/STA
Twin swivel side grip
For up to 6mm panel.
Code: 6319
Size: 19mm ø
Finishes: SA/BA/STA
When using 3mm cable, the distance between the cable
centre and the edge of the panel should be 7.5mm.
When ordering, insert a forward slash after the
code, followed by the finish code. e.g. 6011/SA.
1
3MM CABLE
Silver anodised
Finish code SA
Brass anodised
Finish code BA
Stainless anodised
Finish code STA
3MM CABLE COMPONENTS
Shelf support
Through hole panel support
Shelf requires a 9mm ø hole.
Code: 6307
Size: 19mm ø
Finishes: SA/BA/STA
For 3mm to 10mm panel thickness.
Panels require 12mm ø holes.
Code: 6379
Size: 19mm ø
Finishes: SA/BA/STA
Through hole panel support
Shelf grip
Twin through hole panel support
Shelf support
For up to 6mm thickness.
Supplied with nylon tipped grub screw.
Code: 6310
Size: 19mm ø
Finishes: SA/BA/STA
For 3mm to 10mm panel thickness.
Panels require 12mm ø holes.
Code: 6378
Size: 19mm ø
Finishes: SA/STA
Twin shelf grip
Banner pole
For up to 6mm thickness.
Supplied with nylon tipped grub screws.
Code: 6312
Size: 19mm ø
Finishes: SA/BA/STA
Includes two end supports and 15mm ø
aluminium tube. Up to 1M long. Sizes over 1M P.O.A.
Code: 6320
Size: 15mm ø
Finishes: SA/STA
Cable frame support
Hanging rail
Requires AK5 allen key
Code: 6316
Size: 19mm ø
Finishes: SA/BA/STA
Includes two end caps and universal grips.
Up to 1250mm long.
Code: 6013
Size: 25mm ø
Finishes: Chrome plated/stainless steel
When ordering, insert a forward slash after the
code, followed by the finish code. e.g. 6011/SA.
Banner pole
Silver anodised
Finish code SA
Brass anodised
Finish code BA
Stainless anodised
Finish code STA
3MM CABLE
2
CABLE ACCESSORIES
1.5mm cable accessories
Floor universal cable grip with spring
3mm cable accessories
Allen key
For use with all 3mm components.
Code: AK3
Code: 6512/15
Size: 10mm ø
Finishes: SV
Ceiling and floor track
Allen key
Ceiling and floor track
Allen key
Cut to size.
Available in up to 3M lengths.
Code: 6014
Size: 11.5mm x 20mm
Finishes: SA
For use with all 1.5mm components.
Code: AK2
Cut to size.
Available in up to 3M lengths.
Code: 6014
Size: 11.5mm x 20mm
Finishes: SA
For use with 6316 frame support
Code: AK5
Stainless steel cable
Allen key
Stainless steel cable
Grub screws
Code: 6500
Size: 1.5mm ø
For use with 6016 frame support
Code: AK5
Code: 6501
Size: 3mm ø
Box of 10.
Code: GS6-6ZP Size: M6 x 6
Code: GS6-8ZP Size: M6 x 8
Code: GS10-10ZP Size: M10 x 10
Finishes: Silver
Top boss
Grub screws
Ceiling shield
Nylon tipped grub screws
Code: 6000/3
Size: 19mm ø
Finishes: SV/BR/STA
Box of 10.
Code: GS4-4ZP Size: M4 x 4
Code: GS4-5ZP Size: M4 x 5
Code: GS4-6ZP Size: M4 x 6
Finishes: Silver
For use with suspended ceiling.
Code: 6515
Size: 19mm ø
Finishes: SA/BA/STA
For use with glass shelves. Box of 10.
Code: GS4-8NTZP
Size: M4 x 8
Finishes: Silver
Top universal cable grip
Nylon tipped socket set screws
Top universal cable grip
Woodscrews
Code: 6512/1
Size: 10mm ø
Finishes: SV
For use with glass shelves. Box of 10.
Code: GS4-8NTZP
Size: M4 x 8
Finishes: Silver
For 3mm ø cable.
Code: 6512/2
Size: 10mm ø
Finishes: SV
Box of 10.
Code: WS8-11/2
Size: 8 x 11/2”
Finishes: Zinc
Ceiling shield
Woodscrews
Floor universal cable grip
Universal wire cutters
For use with suspended ceiling
Code: 6514
Size: 19mm ø
Finishes: SA/BA/STA
Box of 10.
Code: WS8-11/2
Size: 8 x 11/2”
Finishes: Zinc
For 3mm ø cable.
Complete with spring.
When ordering, insert a forward slash after the
code, followed by the finish code. e.g. 6011/SA.
1
CABLE ACCESSORIES
Silver anodised
Finish code SA/SV
Brass anodised
Finish code BA/BR
Code: 6512/30
Size: 10mm ø
Finishes: SV
Stainless anodised
Finish code STA
Code: WC-1
Acrylic pockets mounted on 10mm rod make an attractive reception display at
MRM Worldwide in London. Graphics and logos of partners and clients are
displayed in each pocket and can be changed quickly and easily.
SAMPLE CASE
A HELPING HAND FOR OUR TRADE
PARTNERS
The new Display Systems sample case is designed to offer
our trade partners a versatile helping hand for developing
their businesses. This stylish travel case has been carefully
designed to present a comprehensive selection of
stainless anodised components and application examples
from our cable, rod and acrylic pocket ranges.
Our sales team will be pleased to discuss your sample
case requirements.
“ I was so impressed
with the sample case I
bought two! It shows
my customers exactly
what they are getting
and is an ideal way of
putting our ‘case’
across in order to get
that sale ”.
Andy Delpech
General Manager, The Oasis Graphic Co.
6MM ROD
Making the choice between rod and cable Suspended
Display Systems can involve both practical and aesthetic
considerations. Our 6mm stainless steel rod system gives
a deliberately understated impression compared with its
10mm sibling, while at the same time offering greater
system rigidity than cable. In line with the other ranges in
this series, the rod is complemented by a very wide
choice of components in silver, brass and stainless
steel eeffect
ffect
ff
ect anodised finishes, offered from
stock.
You can opt to configure and install your system, or use
our design and installation service, if you prefer. In both
cases, you will benefit from unsurpassed quality, with a
one-year guarantee against defects.
6MM ROD COMPONENTS
Kit for fixing between floor and ceiling
Comprises: 19mm ø ceiling and floor fitting with tensioner.
Allen key and fixing screws supplied.
Code: 4000
Finishes: SA/BA/STA
4040 kit
Threaded stainless
steel rod
Rod length 1M.
Code: 4500
Size: 6mm ø
Finishes: Stainless steel/BA
Ceiling, floor or wall mounted kit
Stainless steel rod, flush ends
Comprises: 40mm ø top and bottom swivel rose with
tensioner. Fixing screws supplied.
Code: 4005
Finishes: SA/BA/STA
Code: 4506 (500mm)
4507 (1000mm)
4508 (1500mm)
Size: 6mm ø
Finishes: Stainless steel
4005 kit
Track mounted kit
Top grip
Comprises: 19mm ø track mounted rod fixing kit.
Code: 4040
Finishes: SA/STA
For up to 6mm panel thickness.
Code: 4004
Size: 19mm ø
Finishes: SA/STA
Wall mount rod holder
Decorative aluminium end cap
Code: 4522
Size: 19mm ø
Finishes: SA/BA/STA
For 6mm rod.
Code: 4504
Size: 15mm ø
Finishes: SA/BA/STA
INSTALLATION TIP
Top grip
Code: 4016
Size: 19mm ø
Finishes: SA/BA/STA
The dimension shown
remains the same,
irrespective of the panel size.
Except when using
swivel fixings 4018/4019. This is
increased to 13.5mm each side.
Slimline side grip
For up to 4mm panel.
Must be inserted over end of rod – non-removable.
Code: 4011
Size: 12mm ø
Finishes: SA/STA
4000 kit
When using 6mm rod, the distance between the rod centre
and the edge of the panel should be 10mm.
When ordering, insert a forward slash after the
code, followed by the finish code. e.g. 6011/SA.
1
6MM ROD
Silver anodised
Finish code SA
Frame support
Brass anodised
Finish code BA
Stainless anodised
Finish code STA
6MM ROD COMPONENTS
Side grip support
Through hole panel support
For up to 6mm panel thickness.
Code: 4066
Size: 19mm ø
Finishes: SA/BA/STA
For 3mm to 10mm panel thickness.
Panels require 12mm ø holes.
Code: 4525
Size: 19mm ø
Finishes: SA/BA/STA
Side grip
Side grip support
Twin through hole panel support
For up to 10mm panel thickness.
Code: 4076
Size: 19mm ø
Finishes: SA/BA/STA
For 3mm to 10mm panel thickness.
Panels require 12mm ø holes.
Code: 4628
Size: 19mm ø
Finishes: SA/BA/STA
Twin side grip support
Swivel grip
For up to 6mm panel.
Code: 4068
Size: 19mm ø
Finishes: SA/BA/STA
For up to 6mm panel.
Code: 4018
Size: 19mm ø
Finishes: SA/BA/STA
Top and bottom grip
Shelf grip
Twin swivel grip
For up to 6mm panel.
Supplied with nylon tipped grub screw.
Code: 4010
Size: 19mm ø
Finishes: SA/BA/STA
For up to 6mm panel.
Code: 4019
Size: 19mm ø
Finishes: SA/BA/STA
Crossover support
Twin shelf grip
Top and bottom grip
For up to 6mm panel thickness.
Supplied with nylon tipped grub screw.
Code: 4012
Size: 19mm ø
Finishes: SA/BA/STA
For up to 10mm panel thickness.
Code: 4009
Size: 19mm ø
Finishes: SA/BA/STA
Banner pole
Crossover support
Includes two end supports and
15mm ø aluminium tube. Up to 1M long.
For sizes over 1M P.O.A.
Code: 4020
Size: 15mm ø Finishes: SA/STA
For 6mm horizontal rod.
Code: 4077
Size: 19mm ø
Finishes: SA/STA
When ordering, insert a forward slash after the
code, followed by the finish code. e.g. 6011/SA.
Silver anodised
Finish code SA
Brass anodised
Finish code BA
Stainless anodised
Finish code STA
6MM ROD
2
Already widely used as a stylish medium in retail and corporate display, our
Suspended Display Systems have now been developed to offer multi-purpose
solutions for interior partitions, where privacy and the creative use of space are
the primary considerations. These individually sized, coloured acrylic panels and
10mm stainless steel rod rise stylishly from floor or ceiling, secured by
reinforced fixings and side grips.
10MM ROD
Systems utilising 10mm stainless steel rod benefit from
exceptional strength and rigidity, while at the same time
making a bold aesthetic statement. Since its introduction,
our 10mm rod range has won many plaudits from
architects and designers, who have recognised the many
and varied creative opportunities that it opens up. In this
instance, components with a choice of silver and stainless
steel eeffect
ffect fifinishes
ffect
nishes are available from stock.
You can opt to configure and install your system, or use
our design and installation service, if you prefer. In both
cases, you will benefit from unsurpassed quality, with a
one-year guarantee against defects.
10MM ROD COMPONENTS
Kit for fixing between floor and ceiling
Comprises: 25mm ø top and bottom fixings. Allen key and
fixing screws supplied.
Code: 3000
Finishes: SA/STA
Heavy duty ceiling fixing
3000 kit
Side grip
For up to 6mm panel thickness.
Code: 3066
Size: 19mm ø
Finishes: SA/STA
Heavy duty ceiling fixing
Side grip
Includes fixing screws.
Code: 3003
Size: 50mm ø
Finishes: SA/STA
For up to 10mm panel thickness.
Code: 3086
Size: 19mm ø
Finishes: SA/STA
Side grip
Ceiling fixing/top boss
Twin side grip
Includes universal grip and fixing screw.
Code: 3002
Size: 25mm ø
Finishes: SA/STA
For up to 6mm panel thickness.
Code: 3068
Size: 19mm ø
Finishes: SA/STA
Heavy duty ceiling fixing
Floor fixing /anchor sleeve and collar
Decorative aluminium end cap
Includes fixing screw.
Code: 3001
Size: 25mm ø
Finishes: SA/STA
Code: 3504
Size: 19mm ø
Finishes: SA/STA
Wall mount rod holder
Rubber end cap
Code: 3522
Size: 25mm ø
Finishes: SA/STA
For 10mm rod.
Code: 3505
Size: For 10mm rod
Finishes: Grey
Wall mounted rod holder
Rod with threaded ends
Shelf grip
Rod length 1M.
Code: 3500
Size: 10mm ø
Finishes: Stainless steel
For up to 8mm panel thickness. Supplied with nylon tipped
grub screw.
Code: 3010
Size: 19mm ø
Finishes: SA/STA
When ordering, insert a forward slash after the
code, followed by the finish code. e.g. 6011/SA.
1
10MM ROD
Decorative aluminium end cap
Silver anodised
Finish code SA
Stainless anodised
Finish code STA
10MM ROD COMPONENTS
Twin shelf grip
Twin support
For up to 8mm panel thickness.
Supplied with nylon tipped grub screw.
Code: 3021
Size: 19mm ø
Finishes: SA/STA
Through hole panel support
Rod frame support
For 3-10mm panel thickness. Panels require a 12mm ø hole.
Code: 3528
Size: 19mm ø
Finishes: SA/STA
Top grip support
Code: 3022
Size: 19mm ø
Finishes: SA/STA
Rod frame support
Suport for 10mm horizontal rod between
vertical rods
For up to 6mm panel thickness.
Code: 3004
Size: 19mm ø
Finishes: SA/STA
Banner pole
Code: 3076
Size: 19mm ø
Finishes: SA/STA
Includes two end supports and 19mm ø
aluminium tube. Up to 1M long. For sizes over
1M P.O.A.
Code: 3020
Size: 19mm ø
Finishes: SA/STA
Crossover support
For 10mm horizontal and vertical rod.
Code: 3077
Size: 19mm ø
Finishes: SA/STA
INSTALLATION TIP
Top grip support
Through hole panel support
For 3-10mm panel thickness. Panels require a 12mm ø hole.
Code: 3525
Size: 19mm ø
Finishes: SA/STA
The dimension shown remains
the same, irrespective of the
panel size.
When using 10mm rod, the distance between the rod centre
and the edge of the panel should be 12mm each side.
When ordering, insert a forward slash after the
code, followed by the finish code. e.g. 6011/SA.
Silver anodised
Finish code SA
Stainless anodised
Finish code STA
10MM ROD
2
ROD ACCESSORIES
6mm rod accessories
Rod collar
10mm rod accessories
Code: 4000/1
Size: 10mm ø
Finishes: SV
Ceiling and floor track
Rubber end cap
Allen key
Cut to size.
Available in up to 3M lengths.
Code: 6014
Size: 11.5mm x 20mm
Finishes: SA
Code: 4505
Finishes: Black
For use with all 10mm rod components.
Code: AK3
Ceiling shield
Allen key
Grub screws
For use with suspended ceilings.
For use with all 6mm rod components.
Code: AK2
Code: GS6-6ZP Size: M6 x 6
Code: GS6-8ZP Size: M6 x 8
Finishes: Silver
Top boss
Grub screws
Nylon tipped grub screws
Code: 6000/3
Size: 19mm ø
Finishes: SV/BR/STA
Code:
Code:
Code:
Finishes:
For use with glass shelves
Code: GS6-6NTZP
Size: M6 x 6
Finishes: Silver
Code: 6516
Size: 19mm ø
Finishes: SA/BA/STA
GS4-4ZP Size: M4 x 4
GS4-5ZP Size: M4 x 5
GS4-6ZP Size: M4 x 6
Silver
“ We are very pleased with the services provided by the team.
Top universal rod grip
They produced a fantastic result and come highly recommended ”.
Code: 4000/2
Size: 10mm ø
Finishes: SV
(MRM Worldwide)
When ordering, insert a forward slash after the
code, followed by the finish code. e.g. 6011/SA.
1
ROD ACCESSORIES
Silver anodised
Finish code SA/SV
Brass anodised
Finish code BA/BR
Stainless anodised
Finish code STA
A C RY L I C FA B R I C AT I O N
We manufacture an extensive range of acrylic poster
pockets and leaflet dispensers to complement our
Suspended Display Systems and Sign Connections ranges,
as well as meeting generic slatwall and panel-mounted
requirements. Many standard sizes are available from
stock and anti-re
anti-reflective, opal, tinted, coloured and
fi
etched finishes
can be made to order. Special requirements
for these or any other type of acrylic item can be met
utilising the latest CNC design and fabrication
technologies.
A C RY L I C FA B R I C AT I O N
Easy access display pockets
A4 leaflet holder
Portrait
Codes: To hold A5 – 6100
To hold A4 – 6101
To hold A3 – 6102
To hold A2 – 6106
To hold A1 – 6107
To hold A0 – 6110
Landscape
Codes: To hold A5 – 6103
To hold A4 – 6104
To hold A3 – 6105
To hold A2 – 6108
To hold A1 – 6109
Finishes: 3mm clear acrylic
Supplied with aluminium spacers.
Can fit under A4 portrait pockets.
Code: 6131
Size: 240mm wide, 30mm fill
Finishes: 4mm clear acrylic
Double A4 portrait easy access pocket
Easy access display pocket
Double A4 leaflet holder
5 x one-third A4 leaflet holder
Supplied with aluminium spacers.
Can fit under A1 portrait or A2 landscape pockets.
Code: 6132
Size: 624mm wide,
30mm fill
Finishes: 4mm clear
acrylic
Code: 6128
Size: 475mm
overall width
Finishes: 3mm clear acrylic
Triple A4 leaflet holder
Supplied with aluminium spacers.
Can fit under A1 landscape or A0 portrait pockets.
Code: 6133
Size: 871mm wide,
30mm fill
Finishes: 4mm clear
acrylic
Triple A4 portrait easy access pocket
Code: 6129
Size: 711mm
overall width
Finishes: 3mm clear
acrylic
Custom made angled acrylic shelves
Triple one-third A4 leaflet holder
Pocket clamp
For use with easy access poster pockets A3 size +.
Code: 6119
Size: 45mm long
Finishes: High impact acrylic
1
ACRYLIC FABRICATION
Triple A4 portrait easy access pocket
Partition/logo panel
Supplied with aluminium spacers.
Can fit under A2 portrait or A3 landscape pockets.
Code: 6134
Size: 450mm wide,
30mm fill
Finishes: 4mm clear acrylic
A C RY L I C FA B R I C AT I O N
5 x one-third A4 leaflet holder
Supplied with aluminium spacers.
Can fit under A1 portrait or A2 landscape pockets.
Code: 6135
Size: 624mm wide,
30mm fill
Finishes: 4mm clear
acrylic
Slat wall system leaflet dispenser –
injection moulded
Portrait
Codes: To hold A4 – 3214
To hold A5 – 3215
To hold 1/3 A4 – 3216
Finishes: Clear acrylic
Custom made header panel
Custom made flexi pocket
Double A5 portrait leaflet holder
Supplied with aluminium spacers.
Can fit under A2 portrait or A3 landscape pockets.
Code: 6136
Size: 450mm wide,
30mm fill
Finishes: 4mm clear
acrylic
Sloping acrylic shelf
Custom made easy access pocket
Size: To specification
Finishes: To specification
Triple A5 portrait leaflet holder
Supplied with aluminium spacers.
Can fit under A1 portrait or A2 landscape pockets.
Code: 6137
Size: 624mm wide,
30mm fill
Finishes: 4mm clear
acrylic
Glass shelves
With keyholes, drilled holes
or plain. From 6mm to 25mm
thickness.
Size: To speci
specification
fication
Finishes: To speci
specification
fication
Leaflet dispenser – injection moulded
Can be used freestanding or wall mounted (please state
when ordering).
Portrait
Codes: To hold A4 – 3014
To hold A5 – 3015
To hold 1/3 A4 – 3016
Finishes: Clear acrylic
Glass shelf
Timber shelves
Veneered, laminated or
painted.
Size: To speci
specification
fication
Finishes: To speci
specification
fication
ACRYLIC FABRICATION
2
McDonald’s restaurants in the UK feature these ‘Did You Know?’ boards.
They were specially designed and manufactured to display A2 posters and A5
literature, and form part of a bespoke product family.
D I S P L AY L I G H T I N G
Our low voltage cable and rod lighting system offers a
stylish and technically advanced solution for illuminating
displays configured using Suspended Display Systems. It
comprises a wide choice of components for greater
design flexibility and can be specified to meet precise
display requirements.
D I S P L AY L I G H T I N G
Low voltage cable and rod lighting systems are
available for standard 1.5mm and 3mm high
conductivity cable and 6mm rod displays, utilising
either 12V or 24V supplies and 20W, 35W or 50W
lamps. This guide provides sufficient ordering
How the system works
Up to 2M of mains
cable from
power
supply to
transformer
system configuration and specification.
Lighting configurations on one pair of
cables
12V (up to 105VA)
5551
12V 105VA transformer
Electrical spur within
2M of transformer
information to satisfy most needs and our sales team
is always willing to offer technical advice about
Typical system 1
Maximum of
1.5M of power
feed cable from transformer
to power connectors, with
sprung plug to end
Light fittings can
be positioned
anywhere along
the length of the
cable/rod. Units
can be moved
easily by using an
allen key
Cable/rod fixed
to ceiling
Power connectors attach on to
the cable/rod and sprung
plug simply pushes in
1 x 50W
5251
Power feed to 1.5mm
cable connector
Transformer required above each
pair of cables/rods.
Fix transformer
to ceiling/wall
5550
Power feed
cables
5401
Lamp unit
5000
Cable kit
5055
50W lamp
20, 35 or 50W lamp
Typical system 3
5552
24V 105VA transformer
3 x 35W
5 x 20W
Typical system 2
5550
Power feed
cables
24V (up to 200VA)
5251
Power feed to 1.5mm
cable connector
5521
Lamp unit
2 x 50W
5000
Cable kit
1
DISPLAY LIGHTING
10 x 20W
5000
Cable kit
5550
Power feed cables
5251
Power feed to
1.5mm cable
connector
5055
50W lamp
5511
Lamp unit
5055
50W lamp
4 x 50W
5551
12V 105VA
transformer
D I S P L AY L I G H T I N G
Single lamp with counterbalance (12V)
Single sided single lamp (12V)
Code: 5201 For 1.5mm high conductivity cable system Max width: Up to 600mm
Code: 5203 For 3mm high conductivity cable system Max width: Up to 600mm
Code: 5206 For 6mm rod system Max width: Up to 600mm
Code: 5501 For 1.5mm high conductivity cable system Max width: Up to 650mm
Code: 5503 For 3mm high conductivity cable system Max width: Up to 650mm
Code: 5506 For 6mm rod system Max width: Up to 650mm
Single lamp without counterbalance (12V)
Double sided single lamp (12V)
Code: 5401 For 1.5mm high conductivity cable system Max width: Up to 600mm
Code: 5403 For 3mm high conductivity cable system Max width: Up to 600mm
Code: 5406 For 6mm rod system Max width: Up to 600mm
Code: 5511 For 1.5mm high conductivity cable system Max width: Up to 650mm
Code: 5513 For 3mm high conductivity cable system Max width: Up to 650mm
Code: 5516 For 6mm rod system Max width: Up to 650mm
Twin lamp with counterbalance (24V)
Single sided twin lamp (24V)
Code: 5221 For 1.5mm high conductivity cable system Max width: Up to 800mm
Code: 5223 For 3mm high conductivity cable system Max width: Up to 800mm
Code: 5226 For 6mm rod system Max width: Up to
800mm
Code: 5521 For 1.5mm high conductivity cable system Max width: Up to 900mm
Code: 5523 For 3mm high conductivity cable system Max width: Up to 900mm
Code: 5526 For 6mm rod system Max width: Up to 900mm
Twin lamp without counterbalance (24V)
Double sided twin lamp (24V)
Code: 5421 For 1.5mm high conductivity cable system Max width: Up to 800mm
Code: 5423 For 3mm high conductivity cable system Max width: Up to 800mm
Code: 5426 For 6mm rod system Max width: Up to 800mm
Code: 5531 For 1.5mm high conductivity cable system Max width: Up to 900mm
Code: 5533 For 3mm high conductivity cable system Max width: Up to 900mm
Code: 5536 For 6mm rod system Max width: Up to 900mm
Lamps
Code: 5054
20W with lens cover
Code: 5035
35W with lens cover
Code: 5055
50W with lens cover
All lamps are compatible with all of the systems shown above.
DON’T FORGET YOU NEED L AMPS, TRANSFORMERS, POWER FEEDS AND POWER CONNECTORS FOR YOUR KITS
DISPLAY LIGHTING
2
D I S P L AY L I G H T I N G
Covered dichroic lamps
Code: 5054
Code: 5035
Code: 5055
Watts: 20
Watts: 35
Watts: 50
1.5mm high conductivity cable kit for fixing
between floor and ceiling
Beam: 36˚
Beam: 36˚
Beam: 36˚
Allen key and fixing screws supplied.
Code: 5000
Finishes: SA/STA
Allen keys
Code: AK2
Code: AK3
Available in up to 3M lengths.
Code: 6014
Size: 11.5 x 20mm
Finishes: SA
Isolated track fixing
Size: 2mm/M4
Size: 3mm/M6
1.5mm high conductivity cable kit for ceiling, floor
or wall mounting
Allen key and fixing screws supplied.
Code: 5005
Finishes: SA/STA
Transformers
Code:
Size:
Code:
Size:
Code:
Size:
Ceiling and floor track
For use with 5000/SA, 5300/SA and 4000/SA only.
Code: 5301
Size: 19mm ø
Finishes: White acetyl
1.5mm stainless steel high conductivity cable
5551 Osram 12V electronic (up to 105VA)
110 x 50 x 35mm
5552 Mode 24V electronic (up to 105VA)
150 x 50 x 35mm
5553 Leuenberger 24V laminated (up to 200VA)
200 x 100 x 70mm
5551 – 12V
5553 – 24V
Code: 6503
Size: 1.5mm ø
Finishes: Silver
3mm high conductivity cable kit for fixing between
floor and ceiling
Allen key and fixing screws supplied.
Code: 5300
Finishes: SA/STA
3mm stainless steel high conductivity cable
Code: 6502
Size: 3mm ø
Finishes: Silver
5552 – 24V
6mm rod kit for ceiling, floor or wall mounting
Allen key and fixing screws supplied.
Code: 4005
Finishes: SA/STA
6mm stainless steel rod
Power connectors
6mm rod kit for fixing between floor and ceiling
Universal wire cutters
Pair of power feed connectors.
Code: 5251/1 Size: For 1.5mm ø cable
Code: 5251/3 Size: For 3mm ø cable
Code: 5251/6 Size: For 6mm ø rod
Allen key and fixing screws supplied.
Code: 4000
Finishes: SA/STA
Power feed cables
Pair of cables with power plugs.
Code: 5550
Size: 1.5M long
When ordering, insert a forward slash after the
code, followed by the finish code. e.g. 6011/SA.
3
DISPLAY LIGHTING
Silver anodised
Finish code SA
Stainless anodised
Finish code STA
Code:
Code:
Size:
Finishes:
4509/SS 2M length.
4510/SS 3M length.
6mm ø
Stainless steel
Code: WC/1
F R E E STA N D E R S
Freestanders extends the benefits of our cable and rod
display systems by adding a strong, but lightweight,
aluminium framework that can be used freestanding or
fixed to a wall. Its eye-catching elliptical profiles have
been designed to combine strong aesthetic appeal with
a versatile display capability that is also exceptionally
price competitive. Users can choose the shelves,
pockets, holders, dispensers and lighting required to
complete their display from the extensive range shown
in this guide.
F R E E STA N D E R S
Single bay freestanding frame
Freestanding foot
with castors
Supplied with freestanding feet.
Part no. Internal
Overall
width
height
E4101
550mm
2050mm
E4102
700mm
2050mm
E4103
850mm
2050mm
E4104
1000mm
2050mm
E4105
1250mm
2050mm
E4106
1500mm
2050mm
Part No. E4702
Sidegrip*
Freestanding flat base
Part No. E4703
6040
Freestanding adjustable foot
Part No. E4701
Freestanding extension bay
Supplied with freestanding foot.
Part no. Internal
Overall
width
height
E4107
550mm
2050mm
E4108
700mm
2050mm
E4109
850mm
2050mm
E4110
1000mm
2050mm
E4111
1250mm
2050mm
E4112
1500mm
2050mm
Adjustable foot
Part No. E4023
Triple A5 portrait leaflet holder**
Foot (for use with lighting)
Part No. E4005
* See 1.5mm cable range
* * See acrylic fabrication
1
FREESTANDERS
F R E E STA N D E R S
1.5mm cable
track kit
1.5mm cable
shelf kit
Part No: 6040/SA
Part No: E4401
Freestanding Unipost
4 prong
Part No. E4301
Oval
Part No. E4302
Overall height 2M.
Direct fix shelf kit
Four prong base for
freestanding Unipost
Part No. E4006
Oval base for
freestanding Unipost
Part No. E4007
6.0mm rod
track kit
6.0mm rod
shelf kit
Part No: E4406
Part No: E4402
Floor to ceiling
upright kit complete
Part No. E4015
3M length of vertical extrusion
complete with adjustable foot
top and bottom.
Freestanding flat base
Freestanding adjustable foot
FREESTANDERS
2
F R E E STA N D E R S
Joint assembly – upright to cross rail
(pair)
Vertical extrusion
Part No. E4710 (6000mm)
Part No. E4705 (3000mm)
Part No.E4800
Cross rail extrusion
Vertical extrusion clamp
Part No. E4720 (6000mm)
Part No. E4715 (3000mm)
Part No: E4016
19mm ø button.
Panels will require 6mm ø holes.
12V lighting 300mm arm
Plastic end cap for
vertical extrusion
Part No. E4601
Direct fix panel grip
Wall extensions
Part No: E4040
For up to 8mm
panel thickness.
Part No. E4019 (75mm)
Part No. E4003 (200mm)
Direct fix shelf kit
(pair)
Part No: E4501
For up to 8mm
panel thickness.
75mm
200mm
COMPONENT CUTTING GUIDES
Part No. E4022
Transformer housing
Powder coated option
Part No. E4602
Wide range of RAL and
BS colour options available.
Cutting guide for horizontal extrusion bar
for non-standard sized frames
3
FREESTANDERS
Cutting guide for shelves using direct shelf kit
F R A M E L E S S D I S P L AY S YS T E M
Only the merest hint of a fine aluminium edge gives away
the fact that something rather clever has happened to
textile graphic display systems. Frameless does it all with
such style that you simply don't realise it's there. Ideal for
exhibitions, wall graphics and many other uses, the
system can be supplied in single- or double-sided and
even light box formats.
HOW DOES IT WORK?
It’s easy. A stretch fabric with a stitched keder pushes into
the aluminium extrusion. Simply select the frame for
either wall mounted, ceiling hung or freestanding, give us
the dimensions and we'll work out what you need. We
can even get the printing done for you. Standard sizes
are available too.
F R A M E L E S S D I S P L AY S YS T E M
Double sided slimline extrusion: FL6ECO
Foot for freestanding FL6
FL5ECO
Display two prints back-to-back in the double sided
slimline extrusion. Suitable for ceiling hung displays
to a maximum 700 x 700mm.
Code: FL6ECO
Finishes: SA
Mild steel flat foot. Powder coated regal silver for
use with the FL6 freestanding extrusion.
Sold individually.
Code FL6-FOOT
FL6ECO
Single sided extrusion: FL5ECO
Corner bracket for FL6ECO
Display single sided graphics in this frameless
extrusion. Suitable for wall mounted frames.
To a maximum 3M x 3M.
Code: FL5ECO
Finishes: SA
Set of four corner brackets for
the FL6ECO extrusion.
Code FL6ECO-4
Double sided extrusion: FL6
Corner bracket for FL5ECO
Suitable for freestanding. Large frame sizes may
require additional internal supports –
please contact our sales team for details.
Code: FL6
Finishes: SA
Single sided extrusion
Double sided slimline
Set of four corner brackets for the
FL5ECO extrusion.
Code FL5ECO-4
FL6
Freestanding ‘kit in a bag’
Ready to use freestanding single sided frame with flat feet,
supplied in a carry case. Ideal for use at exhibitions.
Fits into most estate cars. Prints and keder not included.
Code: FL-KIT
Size: 2400 x 2400mm
Finishes: SA
Corner fixings for FL6
Double sided freestanding extrusion
Sold as a set of four, two piece corner
fixings. Designed to sit into the extrusion
and expand to grip the frame together.
Requires careful fitting. Please contact us
for details.
Code FL6-4
‘Kit in a bag’
Hanging kit for frame FL6ECO
We can
also
supply
print
fabric
and
keder
Pair of ceiling mounted cable kits.
Supplied with 2M of cable for
each drop.
Code FL6ECO-1
Keder for print
FL6-FOOT
Silver anodised
Finish code SA
1
FRAMELESS
Keder strip is stitched to the print
for insertion into the extrusion.
Sold per metre. Printing is extra –
please contact our sales team for details.
Code FL-KEDER
A L L F R A M E S N E E D T O B E M I T R E D – C O N TA C T O U R S A L E S T E A M F O R D E TA I L S
EASI FIX
Our innovative Easi-Fix sign system features unique
Grip-Flex® technology, which holds up to 3mm Dibond,
acrylic pockets and Foamex (2mm recommended),
securely at any angle. The
The system works with vertical,
horizontal or curved graphic formats and allows
individual graphics to be changed quickly and easily.
Choose from anodised or painted finishes.
HOW DOES IT WORK?
Use Easi Fix for mounting graphics on walls, ceilings,
floors, or as a freestanding display. The system is available
with one-, two- or
four-way extrusions, as
appropriate, in order to provide a
high degree of versatility in any
situation. Panels simply push into
the extrusion and are held firmly in
place by a hidden rubber seal,
without the requirement for
screws or other fixings.
EASI FIX
One-way slimline: EF1
Suitable for hanging signs, projecting signs, wall
mounted and floor to ceiling applications.
Code: EF1
Size: 18mm ø
Finishes: SA
Hanging kit
Pair of ceiling mounted. 2M drop. Suitable
for use with EF1 and EF11. Pair supplied.
Code: EF1-3
Finishes: SA
EF2 slimline floor to ceiling
One-way maxi: EF11
One-way floor to ceiling fixing
Suitable for flush wall mounted applications and
freestanders.
Code: EF11
Size: 24mm ø
Finishes: SA
Floor and ceiling fixing brackets sold as a kit.
Suitable for EF1 extrusion.
Code: EF1-6
Finishes: SA
Two-way slimline: EF2
Wall mount for EF11 and EF22
Suitable for floor to ceiling and projecting
applications.
Code: EF2
Size: 18 x 30mm
Finishes: SA
Holds EF11 and EF22 extrusions flush
to the wall. Sold as a pair.
Code: EF11-2 (for EF11)
EF22-2 (for EF22)
Finishes: Regal silver
Totem using EF11 maxi
Freestanding using EF44 maxi
Two-way maxi: EF22
Suitable for flush wall mounted applications
and freestanders.
Code: EF22
Size: 34 x 24mm
Finishes: SA
Acrylic pockets (Manufactured in 3mm PETG)
Left fix:
A3 Code: EFLA3P (portrait)
EFLA3L (landscape)
A4 Code: EFLA4P (portrait)
EFLA4L (landscape)
A5 Code: EFLA5P (portrait)
EFLA5L (landscape)
Right fix:
A3 Code: EFRA3P (portrait)
EFRA3L (landscape)
A4 Code: EFRA4P (portrait)
EFRA4L (landscape)
A5 Code: EFRA5P (portrait)
EFRA5L (landscape)
Centre fix:
A0 Code: EFCA0P (portrait)
A1 Code: EFCA1P (portrait)
EFCA1L (landscape)
A2 Code: EFCA2P (portrait)
EFCA2L (landscape)
A3 Code: EFCA3P (portrait)
EFCA3L (landscape)
A4 Code: EFCA4P (portrait)
EFCA4L (landscape)
Bespoke bases available
Four-way slimline: EF4
Suitable for ceiling hung signs only.
Code: EF4
Size: 30 x 30mm Finishes: SA
Four-way maxi: EF44
Suitable for freestanding displays.
Inlays available.
Code: EF44
Size: 45 x 45mm
Finishes: SA
Inlay for EF44
Inserts into the hollows of the EF44 profile to
create a ‘rounded square’.
Powder coating available – contact sales.
Code: EF44INSERT
Finishes: SA
Silver anodised
Finish code SA
1
EASI FIX
Hanging kit using EF1 slimline
Flush Wall mount using EF22 maxi
LEFT
FIX
RIGHT
FIX
CENTRE
FIX
Bespoke
sizes also
available.
Don’t forget, you will also need to order a pocket
clamp (6119 - see acrylic fabrication 1).
B E S P O K E L I T E R AT U R E H O L D E R S , S H E LV E S , S H O E H O L D E R S A N D P O S T E R P O C K E T S AVA I L A B L E
EASI FIX
Ceiling mount for EF4
Allows EF4 extrusion to be ceiling
mounted.
Code: EF4-8
Size: 100 x 100mm
Finishes: Powder coated regal silver
‘Bus stop’ using EF2 slimline
6533/SA
Easi Fix standard frames
Code: EFA4 (A4)
Code: EFA3 (A3)
Code: EFA2 (A2)
Code: EFA1 (A1)
Code: EFA0 (A0) Bespoke sizes also available.
‘Bus stop’ mount for EF1
Endcaps
Bracket suitable for projecting signs
using EF1.
Code: EF1-2
Finishes: Regal silver
EF1-1
Aluminium
EF11-1
Aluminium
EF2-1
Acrylic
EF22-1
Acrylic
‘Bus stop’ mount for EF2
EF44-1
Acrylic
Suitable for projecting and floor and
ceiling applications using EF2.
Code: EF2-2
Finishes: Regal silver
Projection flag using EF3
EF4-1
Acrylic
Easi Fix standard frame
Wall mount using EF1 slimline
Wall mount kit for EF1
Pair of wall mount components suitable
for use with EF1 extrusion.
Code: EF1-4
Finishes: SA
Round base for EF11
Heavy mild steel base, 350mm diameter.
Code: EF11-5
Finshes: Powder coated regal
silver
Maximum height 1.8M
Easi Fix projection flag extrusion: EF3
Recommended with 6533/SA flush mounts –
see Sign Connections page 1.
Code: EF3
Finishes: SA
Oval base for EF22
Heavy mild steel base, 400 x 300mm.
Code: EF22-5
Finshes: Powder coated regal
silver
Maximum height 1.8M
Square base for EF44
Heavy mild steel base, 350 x 350mm.
Code: EF44-5
Finshes: Powder coated regal
silver
Maximum height 1.8M
Silver anodised
Finish code SA
2
EASI FIX
Wall mount flexiboard system: EF7
Custom design your display. Choose the size you want and
we'll supply acrylics, backboard (which can be
printed) and mitre the corners – contact sales.
Code: EF7 Finishes: SA
Wallmount flexiboard using EF7
Key for removing graphics
Essential tool for safely removing panels from all
the extrusions. For use with all pockets and panels.
Code: EFK
TI P: GI VE YO U R SCREW FI X I N GS A PRO FESSI O NAL FI N ISH WITH 6533/SA FLUSH M O U NTS
C U S TO M FA B R I C AT I O N
This rotating rack was custom
designed and manufactured for a
charity key rings promotion.
The powder-coated unit
incorporates a logo printed on
silicon acrylic and fixed with
chromium-plated mounts.
The comprehensive range of standard display products, as
described in this guide, satisfies the needs of many
customers quickly and cost-effectively. For those who seek
an individual approach to meeting a display requirement,
our Custom Fabrication department offers an expert
design service and exceptional skills in acrylic, metal and
timber fabrication, all of which can be focused on
transforming the customer’s vision into reality.
Custom fabrication embraces anything from a simple
adaptation of a standard product, right up to designing
and manufacturing a unique display solution, whether as a
one-off, or a production run for a roll-out. It includes the
full spectrum of corporate identity and branding
possibilities.
The examples shown here are actual custom manufactured
solutions, created by our team following briefing and
analysis of the requirement. If you have a display project
in mind and would like to discuss how it might be brought
to fruition, please contact our sales team.
Floor-fixed, brushed stainless steel angled upright support tubes,
with frosted acrylic panel to front and changeable A4 and A3 easy
access pockets. Customers included Taylors Countrywide, Bairstow
Eves, Hawkins Countrywide and Mann Countrywide. In total, eight
locations utilised the displays.
The fusion of materials used in the
construction of this freestanding store
directory unit included mirror polished
stainless steel, mild steel, aluminium alloy
and acrylic. It stands approximately 1.8m
high.
This charity collection box was designed and
manufactured for McDonald's. It is made
from high impact, fire resistant plastic, with a
powder coated metal base.
The implementation of a new corporate identity for HM Revenue and Customs
resulted in a refurbishment programme for its centres nationwide. An attractive
display solution was created, with high level graphics, mesh banners and
telephone booths, all utilising rod and Sign Connections components.
Download PDF