TUNED DRUMS
INSTALLATION GUIDE
FREENOTES HARMONY PARK
194 BODO DRIVE, UNIT F
DURANGO CO 81303
TEL: (970) 375-7825
FAX: (970) 247-0856
WWW.FREENOTESHARMONYPARK.COM
10"
12"
8"
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF FREENOTES HARMONY
PARK IS PROHIBITED.
6"
Contents:
•
SHEET 2 - In Ground Installation w/ Parts List
•
SHEET 3 - Surface Mount Installation w/ Parts List
TITLE:
Cap Color Options:
Rainbow
Arrangement
Natural
Arrangement
Moss
Arrangement
Taupe
Arrangement
DWG. NO. TD-INSTALL
Main Features:
•
Low to High Tuning
•
Cap Color Options
Tuned Drums - Installation Guide
Heights vary by Age Group
15"
REVISION: NA
SCALE: 1:16
DATE: 12/19/2017
SHEET 1 OF 3
Parts List:
ITEM NO.
1
2
3
4
5
DESCRIPTION
15" In Ground Tuned Drum
12" In Ground Tuned Drum
10" In Ground Tuned Drum
8" In Ground Tuned Drum
6" In Ground Tuned Drum
QTY.
1
1
1
1
1
NORMAL FINISHED HEIGHT
37"
35"
33"
31"
29"
TODDLER FINISHED HEIGHT
29"
27.5"
26"
24.5"
23"
Step 1: Arrange Drums in desired location and pattern. Drums can be laid out in any configuration desirable, but must be installed less
than 3" or greater than 9" apart. WARNING: Between 3" and 9" there lies a chance for a child's head to get stuck.
(Reference: US Consumer Product Safety Commission, Public Playground Safety Handbook)
Step 2: Determine border of trench for concrete pad. Trench should be a minimum of 6" deep. Concrete pad should perform under
local soil and weather conditions.
FREENOTES HARMONY PARK
194 BODO DRIVE, UNIT F
DURANGO CO 81303
TEL: (970) 375-7825
FAX: (970) 247-0856
WWW.FREENOTESHARMONYPARK.COM
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF FREENOTES HARMONY
PARK IS PROHIBITED.
TITLE:
Finished Height
(Concrete to Top of Drum)
Step 5: Check for sufficient clearance around instruments. A 36" clearance is recommended around the the entire Drum arrangement
for wheelchair accessibility, however this is not required for proper function. Drums may also be installed next to a wall or in a
variety of different configurations.
(3" or Less)
(9" or Greater)
Step 6: Remove plastic film from drum caps if applicable.
DWG. NO. TD-INSTALL
Step 4: The bottom edge of the Drum Bases are scalloped to assist in their installation into the concrete. Twist Drums into concrete to a
depth of 5". Check for plumbness, if needed brace the Drums to keep them rigid and in place during the curing process.
Leave to set according to the concretemanufacturer's guidelines.
In Ground Installation with Parts List
Step 3: Excavate trench to required depth. Check levelness of trench then pour concrete and fill trench completely per code
requirements. Immediately after the concrete has been poured, drive the Tuned Drums into the wet concrete per your
chosen layout.
REVISION: A
Drum Installed
5" into Concrete
SCALE: 1:16
6" Thick Concrete Pad
DATE: 12/19/2017
SHEET 2 OF 3
QTY.
1
1
1
1
1
5
15
20
1
NORMAL FINISHED HEIGHT
37"
35"
33"
31"
29"
-
TODDLER FINISHED HEIGHT
29"
27.5"
26"
24.5"
23"
-
FREENOTES HARMONY PARK
194 BODO DRIVE, UNIT F
DURANGO CO 81303
TEL: (970) 375-7825
FAX: (970) 247-0856
WWW.FREENOTESHARMONYPARK.COM
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF FREENOTES HARMONY
PARK IS PROHIBITED.
Step 1: Arrange Drums in desired location and pattern. Drums can be laid out in any configuration desirable,
but must be installed less than 3" or greater than 9" apart.
WARNING: Between 3" and 9" there lies a chance for a child's head to get stuck.
Finished Height
(Concrete to
Top of Drum)
(Reference: US Consumer Product Safety Commission, Public Playground Safety Handbook)
Step 2: Once you have decided your layout, replace drums with the provided
Anchor Discs. Mark holes on the concrete through the (3) holes on all of
the Anchor Discs. Set aside Discs, drill 1/4" holes 2" into concrete at
marked locations. A 1/4" masonry drill bit will be needed. Contractor
to provide a concrete slab that will perform under local soil and weather
conditions. (If anchoring to a material other than concrete, fasteners to
be provided by the customer)
Step 3: Place the Anchor Discs back over the drilled out holes. Insert provided
anchor bolts into aligned holes. Position anchor nut so that it is flush with
the top of the bolt. Pound anchor bolts into the hole until the anchor
washer is flush with the post base. Tighten anchor bolts until they are snug.
6" Thick
Concrete Pad
Step 4: Install the Drums over the Anchor Discs. Predrill (4) 1/8" holes in a 90
cross pattern, 1" up from the bottom of the drum. Drill through both Drum
and Anchor Disc. When predrilling holes, make sure they clear the
previously installed anchor bolts, and that there is clearance for the
2" screws to be installed without interfering with the other drums. Secure
Drums to Discs with the provided #10 Butten Head Screws and Driver.
Step 5: Check for sufficient clearance around instruments.
A 36" clearance is recommended around the the
entire Drum arrangement for wheelchair accessibility,
however this is not required for proper function.
Drums may also be installed next to a wall or in a
variety of different configurations.
Step 6: Remove plastic film from drum caps if applicable.
(3" or Less)
(9" or Greater)
8
7
6
DETAIL A
SCALE 1 : 4
DWG. NO. TD-INSTALL
DESCRIPTION
15" Surface Mount Tuned Drum
12" Surface Mount Tuned Drum
10" Surface Mount Tuned Drum
8" Surface Mount Tuned Drum
6" Surface Mount Tuned Drum
Surface Mount Anchor Disc
1/4 x 3.25" Anchor Bolt, SS
#10 Button Head Screw, 2"lg. SS, T25 tamp
Security Driver
Surface Mount Installation with Parts List
ITEM NO.
1
2
3
4
5
6
7
8
9
TITLE:
Parts List:
REVISION: A
SCALE: 1:24
DATE: 12/19/2017
SHEET 3 OF 3
Download PDF