Item No. ___________________________
Project ___________________________
Quantity ___________________________
Heavy Duty Gas Pasta Cooker
CPG Series
MODEL GUIDE

Model No.
Overall Width
Zones
Capacity in Gallons/Liters
CPG-1
17” (432mm)
2
12 gallons / 45.4 Liters
CPG-2
32” (813mm)
3
24 gallons / 90.8 Liters
STANDARD CONSTRUCTION FEATURES:
Model CPG-1 Pasta Cooker shown
with optional round baskets
•Satin finish stainless steel front and sides
•Other surfaces painted black with electrolytic zinc undercoating
•6” (152mm) stainless steel height-adjustable feet
•3/4” NPT rear gas manifold connection
•1/2” NPT cold water connection
•1-1/4” NPT drain
AGENCY APPROVALS:
SHORT/BID SPECIFICATION
Pasta Cooker shall be a Montague Legend Heavy-Duty Pasta Cooker Model:
M CPG-1 [Specify single chamber: 17” (432mm) gas-fired unit with
individual 60,000 BTU/hr ‘U’ burners. 6” (152mm) high flue riser w/
stainless steel cap; 1 full sized pasta basket with removable handle;
front starch skimmer; stainless steel front and sides with 4” (102mm)
legs; plus all the features listed and options/accessories checked
•NSF Listed
•ETL
•CE Approved • EN 203-1
M CPG-2 [Specify double chamber: 34” (813mm)]…gas-fired unit
with (2) individual 60,000 BTU/hr ‘U’ burners. 6” (152mm) high flue
riser w/ stainless steel cap; 2 full sized pasta baskets with removable
handles; front starch skimmer; stainless steel front and sides with 4”
(102mm) legs; plus all the features listed and options/accessories
checked
PASTA COOKER FEATURES:
•Single or double chamber gas pasta cooker
•Designed and engineered to cook pasta
•6” (152mm) high flue riser w/ stainless steel cap
•Construction is 304/316 stainless steel
•Corrosion proof - triple fiberglass mylar insulation
BURNERS & CONTROLS:
•One 60,000 BTU/hr high efficiency burner or (2) for double chamber
•Standing pilot for automatic ignition
•Safety pilot valve
HDS-49 [Rev. 1/13]
THE MONTAGUE COMPANY • 1830 Stearman Avenue, Hayward, CA 94545 • 800 345-1830 • Fax: 510 785-3342 • montaguecompany.com
Item No. ___________________________
Project ___________________________
Heavy Duty Gas Pasta Cooker
Quantity ___________________________
CPG Series
Dimensions in brackets are millimeters
OPTIONS GUIDE:
Baskets:
M 3- 1/3 rectangle - Heavy duty stainless steel
pasta cooker baskets with removable handles
M 2- 1/2 rectangle - Heavy duty stainless steel
pasta cooker baskets with removable handles
M 6- round - Heavy duty stainless steel pasta
cooker baskets with removable handles
International Approvals:
M CE - Conformite Europeenne - EN203-1 Includes flame failure valve option
M Canadian Approval
INSTALLATION REQUIREMENTS & SHIPPING INFORMATION
1. Griddles must be installed in accordance with local codes or in their absence with the
National Fuel Gas Code: ANSI Z223.1. Compliance with codes is the responsibility of the
Owner and Installer.
2. An adequate ventilation system is required. Refer to National Fire Protection Association
Standard No. 96, Standard for Ventilation Control and Fire Protection of Commercial
Cooking Operations.
3. This appliance is intended for commercial use by professionally trained personnel.
NOT intended for Residential Use.
4. Specify installation elevation: _____________ if above 2000 feet (610m).
5. GAS INLET SIZE (All Models): 3/4” NPT right-rear gas inlet. 3/4” NPT gas pressure regulator is provided and must be installed (by others) when unit is connected to gas supply.
Models:
CPG-1
CPG-2
Specify Type of Gas:
Manifold Pressure:
Burners
2
3
M Natural
4.5” WC
BTU/hr* (kW)
60,000(17.5)
120,000(35.2)
M Propane
10.0” WC
BTU/hr* (kW)
60,000(17.5)
90,000 (26.4)
*Add 10,000 BTU/hr (2.9 kWh) for each optional 25,000 BTU/hr star burner.
Minimum
Clearances
Combustible
Construction
Noncombustible
Construction
From Back Wall
3” (76mm)
0”
Left & Right Side
2” (51mm)
0”
For installation on combustible floors with 24” (610mm) high
stand.
For installation on non-combustible counter with 4” (102mm)
high legs.
Shipping
Weight
Shipping
Class
Cube
(Crated)
ft3/m3
290 lbs (132 kg)
402 lbs (182 kg)
85
85
54/1.5
60/1.7
Entry clearance 24” (610mm) crated.
Due to continuous product improvements,
specifications are subject to change without notice.
1830 Stearman Avenue, Hayward, CA 94545
800 345-1830 • Fax: 510 785-3342
www.montaguecompany.com
HDS-49 [Rev. 1/13]