PCRSG0708C RKS25G RKS35G RKS50G RKS60G RKS71H RKS25G 1 RKS35G RKS50G RKS60G RKS71H 2 FTKS25/35D RKS25/35G FTKS25DVM / RKS25GVMG 2.5 (1.2-3.2) kW 8,500 (4,050-10,900) Btu/h FTKS35DVM / RKS35GVMG 3.5 (1.4-4.0) kW 11,900 (4,750-13,650) Btu/h FTKS50/60G RKS50/60G FTKS50GVMG / RKS50GVMG 5.0 (1.7-6.0) kW 17,100 (5,800-20,500) Btu/h FTKS60GVMG / RKS60GVMG 6.0 (2.3-6.7) kW 20,500 (7,800-22,900) Btu/h *1 *1 Available with FTKS50/60G only. 3 FTKS71HVMG / RKS71HVMG 7.1 (2.3-8.5) kW 24,200 (7,800-29,000) Btu/h FTKS71H RKS71H 4 Compliance to Mandatory Energy Label The 5 models listed below have received Singapore’s National Environment Agency (NEA) energy labels for household electrical appliances. FTKS25D/RKS25G FTKS35D/RKS35G 3.57 3.38 COP FTKS50G/RKS50G FTKS60G/RKS60G FTKS71H/RKS71H COP 3.57 3.37 3.38 What is COP? An air conditioner’s COP (Coefficient of Performance) indicates how efficiently the unit uses energy. A higher COP means greater energy efficiency. It also means lower electricity consumption, so you save money. Capacity (W) COP = Power consumption (W) RKS25G RKS35G RKS50G RKS60G RKS71H Inverter Advantages Compared to Non-Inverter Inverters are devices that are able to vary their operating capacity by adjusting frequency. Inverter air conditioners can vary their cooling capacity by adjusting the power supply frequency of their compressors. In contrast, non-inverter air conditioners have a fixed cooling capacity and can only control the indoor temperature by starting or stopping their compressors. Powerful Inverter air conditioners operate at maximum capacity as soon as they start up. As a result, the set temperature can be reached more quickly. Variable Capacity Operation Compressor Inverter Power Control Power source Raise frequency High-speed rotation High capacity Lower frequency Low-speed rotation Low capacity Non-inverter type air conditioner Energy Saving After the indoor temperature approaches the set temperature, Inverter Control adjusts to low capacity operation to maintain this temperature. This makes inverter models more energy-saving than non-inverter models, which must repeatedly start or stop their compressors to maintain the room temperature. Comfortable Inverter air conditioners finely adjust capacity according to changes in the air-conditioning load and the difference between the indoor temperature and set temperature is small. These give higher comfort levels than with noninverter air conditioners. Power source Compressor Constant speed rotation Fixed capacity Inverter air conditioners are able to vary their operating capacity. Non-inverter air conditioners can only operate at a fixed capacity. Comfortable Temperature Control Temp. Compressor off Not cool Set temp. Compressor off Cools a room in less time Too cool Small temp. difference Time During cooling operation Non-inverter type Inverter type Starts This diagram is a representation for illustrative purpose only. 5 Energy-Saving Technological Features Swing Compressor Swing compressor Thanks to its smooth rotation, the swing compressor decreases friction and vibration. It also prevents the leakage of refrigerant gas during compression. These advantages provide quiet and efficient operation. Swing bush Refrigerant gas Integral piston of blade and roller The swing compressor can reduce operational vibration and sound because its piston moves smoothly inside the compressor. Reluctance DC motor Reluctance DC Motor for Compressor Neodymium magnets are used in the pink-coloured area. Efficiency of Reluctance DC motor *4 Motor efficiency (%) Daikin DC Inverter models are equipped with the Reluctance DC motor for compressor. The Reluctance DC motor uses 2 different types of torque, neodymium magnet*1 and reluctance torque*2. This motor saves energy by generating more power with a smaller electric current than AC or conventional DC motors. It is more efficient at the low frequencies most commonly used by air conditioners,*3 improving efficiency by approximately 20%. Reluctance DC motor 90 80 Conventional DC motor More than 20% 70 AC motor 60 50 0 30 60 90 120 Rotational speed (rps) Small load Low capacity *1. A neodymium magnet is approximately 10 times stronger than a standard ferrite magnet. *2. The torque created by the change in power between the iron and magnet parts. *3. The frequency range used by air conditioners during periods of stable operation. This is the range in which air conditioners operate for the longest periods. *4. Data are based on studies conducted under controlled conditions at a Daikin laboratory using Daikin products. PAM Control DC Motor for Fan Efficiency of DC motor for fan *5 100 Efficiency (%) The DC motor allows fine rotation control, which reduces energy consumption. The motor also provides improvements in operational efficiency of up to 40%, compared to an AC motor. These improvements are particularly noticeable in the low-speed range. Large load High capacity (comparison with a conventional AC motor) 80 DC motor Approx. 60 20% increase 40 Approx. AC motor 40% 20 increase 0 200 300 400 500 600 700 800 PAM (Pulse Amplitude Modulation) control reduces energy loss by controlling how often the converter switches on and off. 900 1000 Motor speed (rpm) *5. Data are based on studies conducted under controlled conditions at a Daikin laboratory using Daikin products. What Is DC Inverter? Daikin calls an inverter model that is equipped with a DC motor DC Inverter. A DC motor offers higher efficiency than an AC motor. A DC motor uses the power of magnets to attract and repel to generate rotation. A DC motor that is equipped with high-power neodymium magnets, which enable even greater efficiency, is called a Reluctance DC motor. 6 Intelligent Eye Intelligent Eye prevents energy wastage by using its infrared sensor to detect human movement in a room. When there is no movement, Intelligent Eye increases the temperature by 2 C to give energy savings. This reduces energy wastage if, for example, you forget to turn off the air conditioner. The function can be conveniently activated from the remote controller. Once Intelligent Eye is set, it continues to work to save energy. You do not need to push the SENSOR button each time you wish to use this function. When you are in the room, the air conditioner maintains the set temperature. If Intelligent Eye detects no human movement for 20 minutes, it automatically adjusts the set temperature by 2 C. Top view 7m 110˚ Intelligent Eye The Intelligent Eye indicator lights when sensor movement is detected. Side view 7m When you enter the room, Intelligent Eye automatically returns the temperature to the set level. Econo Mode button Intelligent Eye button Econo Mode FTKS25/35D Running current and power consumption This function limits both the maximum running current and maximum power consumption to 70%* of those during normal operation. It is particularly effective if the cooling load is high, for example, at start-up or during large gatherings and periods of direct sunshine. At the same time, it maintains maximum capacity at 80%* of normal, giving improved operating efficiency, although it may take slightly longer to reach the set temperature. Econo Mode is also useful for preventing circuit breakers from being overloaded during temporary peaks in the running current. The function is easily activated from the remote controller by pushing the ECONO button. Econo Mode is available for FTKS25/35D and 71H. 100% Normal operation 70% Maximum during normal operation Maximum during Econo Mode Econo Mode From start-up until set temperature is reached Time • This diagram is a representation for illustrative purposes only. • Maximum capacity decreases during Econo Mode, requiring more time to reach the set temperature. *Econo Mode limits FTKS71H’s maximum power consumption to 50% during normal operation and also maintains maximum capacity at 60%. 7 Indoor Unit Quiet Operation This series gives you the choice of 5-step, Quiet or Automatic settings for the fan speed. The Quiet setting selects Indoor Unit Quiet Operation. This function decreases the operation sound level by 3 dB (A) below the Low setting. This wide range of settings allows you to precisely control the fan speed according to your requirements. For example, Indoor Unit Quiet Operation provides you with a good night’s sleep. The sound level for FTKS25D is 22 dB (A). FTKS25D Fan speeds Sound levels High (H) 37 dB (A) Low (L) 25 dB (A) Quiet (SL) 22 dB (A) Auto SL L M H 3 dB (A) Fan speed Low High Each decrease in airflow volume reduces the sound level. Sound level Indoor Unit Quiet Operation icon Selects fan speed and Indoor Unit Quiet Operation Outdoor Unit Quiet Operation Outdoor Unit Quiet Operation 22 dB (A) Is So Quiet You Can Even Hear Whispers Outdoor Unit Quiet Operation is available for all models from 2.5 to 7.1 kW class. This function decreases the operation sound level by 3 dB (A) below the rated operation. It provides a low sound level of 43 dB (A) for RKS25G. Indoor unit Capacity may decrease when Outdoor Unit Quiet Operation is selected. 20 RKS25G Operations Sound levels Rated (H) 46 dB (A) Quiet (L) 43 dB (A) 22 Rustling of leaves 30 Outdoor unit 40 50 (dB (A)) Library Pendulum of a wall clock 3 dB (A) 43 Normal office Based on “Examples of Sound Levels”, Ministry of the Environment, Japan, November 12, 2002 8 Titanium Apatite Photocatalytic Air-Purifying Filter Titanium apatite is a new photocatalytic material with advanced adsorption power. While the filter’s micron-level fibres trap dust, this photocatalyst effectively adsorbs and decomposes bacteria. The photocatalyst is activated simply by exposure to light. The filter delivers consistent performance for approximately 3 years if periodic maintenance is performed. Air filter Catches dust Titanium Apatite Photocatalytic Air-Purifying Filter This filter is not a medical device. Benefits such as the adsorption and decomposition of bacteria are only effective for substances that are collected on and in direct contact with the Titanium Apatite Photocatalytic Air-Purifying Filter. For FTKS25/35D and 50/60G Note: The FTKS71H uses 3 air filters and 3 Titanium Apatite Photocatalytic Air-Purifying Filters. For FTKS71H Bacteria removal test Testing method: Dropping method Testing organisation: Japan Spinners Inspecting Foundation Result certificate: No. 012553-1 and 012553-2 Effect of Titanium Apatite Photocatalyst Adsorbs Apatite adsorbs bacteria. At the same time, the photocatalyst oxidises odour components, breaking them down. Removes Light Odours Bacteria Decomposed Deactivated Titanium Apatite Photocatalyst 9 Mould-Proof Operation When cooling or dry operation is stopped, fan-only operation runs automatically for 1 hour. This airflow dries the inside of the indoor unit to reduce the generation of mould and odours. It is available with FTKS25/35D. Wipe-Clean Flat Panel Flat panel models can be cleaned instantly with a single wipe of a cloth across their smooth surface. If more thorough cleaning is required, the panel can also be easily removed from the unit. Conventional Front Grille Design 1. Difficult to remove dust on the grille through wiping alone 2. Reduced capacity due to increased suction resistance Dust Front grille design units collect dust on their air inlet grilles unless these grilles are cleaned regularly. 10 3. High sound levels due to increased suction resistance Comfortable Airflow Vertical Auto-Swing (up and down) Inverter Powerful Operation Inverter Powerful Operation boosts cooling performance for a 20-minute period. This is convenient both when you first turn on your air conditioner and when you want to quickly change the temperature during operation. Horizontal Auto-Swing (left and right) 3-D Airflow Vertical Auto-Swing automatically moves the flaps up and down and Horizontal Auto-Swing automatically moves the louvres to the left and right. 3-D Airflow combines Vertical and Horizontal Auto-Swing to circulate air to every part of a room for uniform cooling of even large spaces. Comfort Airflow Mode Comfort Airflow Mode prevents uncomfortable drafts from blowing directly on to your body. With this function, when you press the COMFORT button during operation, the flap moves upward to prevent direct cold drafts. Horizontal Auto-Swing and 3-D Airflow are available for FTKS50/60G and 71H. Comfor Airflow Mode is available for FTKS71H only. Power-Airflow Dual Flaps Wide-Angle Louvers Power-Airflow Dual Flaps and Wide-Angle Louvres work in tandem to precisely control both vertical and horizontal airflow for distribution of air. Indoor Unit On/Off Switch The unit can be conveniently started manually in the event the wireless remote controller is misplaced or the wireless remote controller batteries are not charged. Power-Airflow Dual Flaps Indoor Unit On/Off Switch Night Set Mode Pressing the Off timer button automatically selects Night Set Mode. This function prevents excessive cooling for your pleasant sleep. Room temperature is raised by 0.5 C after 60 minutes for cooling operation. Cooling: the flaps flatten out during operation so that cool air slides off to reach the corner of the room. Wide-Angle Louvres From a corner to the centre Covers even a spacious room +0.5 C Set temp. before Off timer begins to operate The louvres can be adjusted by hand for FTKS25/35D and with the wireless remote controller for FTKS50/60G and 71H. Cooling Time 60 minutes Off timer turns on Off timer stops air conditioner Cooling operation: Room temperature is raised by 0.5 C after 60 minutes. 11 Lifestyle Convenience Worry Free Anticorrosion Treatment of Outdoor Heat Exchanger Fins Home Leave Operation Home Leave Operation prevents large rises in the indoor temperature by continuing operation* while you are sleeping or out of your home. This means that an air-conditioned welcome awaits when you wake or return. It also means that the indoor temperature can quickly return to your favourite comfort setting. The outdoor unit’s heat exchanger fins are processed using a special anticorrosion treatment. The surface is covered with a thin acrylic resin layer to enhance the fins’ resistance to acid rain and salt corrosion. A hydrophilic film layer also prevents rust caused by the run off of water droplets. * Home Leave Operation can be set at any temperature from 18 to 32 C. Home Leave Operation is available for FTKS50/60G. Cross section of anticorrosion-treated fin During operation, 23 C for the room temperature setting, and 28 C for the Home Leave setting. Hydrophilic film Aluminium Corrosion-resistant acrylic resin 23 C Heat exchanger fin One push!! Start Home Leave Operation simply by pushing its button on the remote controller. Installation Flexibility A long piping length gives installation flexibility. Installation is possible even if there is no space for the outdoor unit near the indoor unit. 28 C FTKS25D/RKS25G FTKS35D/RKS35G When you are out of your home, your air conditioner prevents large rises in the indoor temperature by continuing to operate using Home Leave Operation settings. FTKS50G/RKS50G FTKS60G/RKS60G FTKS71H/RKS71H 23 C Push again!! When you return, you will be greeted by an airconditioned room. Just push the HOME LEAVE button again to return to your previous settings. 12 Max. piping length Max. height difference 25 m 15 m 30 m 20 m Function Dictionary Comfortable Airflow Comfort Control Indoor Unit Quiet Operation Comfort Airflow Mode Indoor unit operating sound levels are decreased by 2 or 3 dB (A) from the Low setting fan speed using the wireless remote controller. This function prevents uncomfortable drafts from blowing directly on to the body. The flap changes the airflow direction. To prevent drafts, the flap moves upward during operation. See page 8 See page 11 Outdoor Unit Quiet Operation Outdoor unit operating sound levels are decreased by 3 dB (A) from the rated operation sound using the wireless remote controller. Power-Airflow Dual Flaps Power-Airflow Dual Flaps can flatten out during cooling operation to deliver cool air to the corners of a room. See page 8 See page 11 Intelligent Eye Wide-Angle Louvres Intelligent Eye with its infrared sensor automatically controls air conditioner operation according to human movement in a room. When there is no movement, it adjusts the temperature by 2 C for energy savings. The smoothly curved Wide-Angle Louvres provide wide airflow coverage for effective operation no matter where the indoor unit is placed in a room. See page 11 See page 7 Vertical Auto-Swing (up and down) Programme Dry Function This function automatically moves the flaps up and down to distribute air across a room. This function automatically reduces the level of humidity. See page 11 Auto Fan Speed Horizontal Auto-Swing (left and right) The microprocessor automatically controls fan speed to adjust the room temperature to the set temperature. Horizontal Auto-Swing automatically moves the louvres to the left and right to cover a room with cool air. See page 11 Timers 3-D Airflow This function combines Vertical and Horizontal AutoSwing to circulate a cloud of cool air right to the corners of even large spaces. 24-Hour On/Off Timer This timer can be preset to start and stop at any time within a 24-hour period. The air conditioner is started/ stopped simply by pressing the On/Off timer button on the wireless remote controller. See page 11 Lifestyle Convenience Night Set Mode Pressing the Off timer button automatically selects Night Set Mode. This function prevents excessive cooling for your pleasant sleep. Room temperature is raised by 0.5 C after 60 minutes for cooling operation. Econo Mode This mode limits maximum running current to 70% and power consumption to 50% to 70% of normal operation, while maintaining maximum capacity at 60% to 80%. This improves operating efficiency and also prevents circuit breakers from being overloaded. See page 11 See page 7 Worry Free Inverter Powerful Operation This function is convenient for boosting cooling performance for a 20-minute period both when you first turn on your air conditioner or want to quickly change the room temperature. Auto-Restart after Power Failure The air conditioner memorises the settings for mode, airflow, temperature, etc., and automatically returns to them when power is restored after a power failure. See page 11 Home Leave Operation Self-Diagnosis with Digital Display Home Leave Operation continues operation to prevent a room from becoming too hot, while you are sleeping or out of your home. Select any temperature from 18 to 32 C. Malfunction codes are shown on the digital display panel of the wireless remote controller for fast and easy maintenance. See page 12 Anticorrosion Treatment of Outdoor Heat Exchanger Fins Indoor Unit On/Off Switch The unit can be conveniently started manually in the event the wireless remote controller is misplaced or the wireless remote controller batteries are not charged. The outdoor unit’s heat exchanger fins are processed using a special anticorrosion treatment. The surface is covered with a thin acrylic resin layer to enhance the fins’ resistance to acid rain and salt corrosion. See page 11 See page 12 13 Function List Indoor Unit Models Cleanliness Functions FTKS FTKS FTKS 25/35D 50/60G 71H DC Inverter Titanium Apatite Photocatalytic Air-Purifying Filter Comfort Airflow Mode Comfortable Airflow This filter contains the new photocatalytic material titanium apatite. While the filter’s micron-level fibres trap dust, this photocatalyst adsorbs and decomposes bacteria. The filter can be used for up to 3 years with proper maintenance. See page 9 Mould-Proof Operation Mould-Proof Operation automatically runs fan-only operation for 1 hour when cooling or dry operation is stopped. This airflow prevents the generation of mould and mould odours inside the indoor unit. Power-Airflow Dual Flaps Wide-Angle Louvres Vertical Auto-Swing (up and down) Horizontal Auto-Swing (left and right) 3-D Airflow Comfort Control See page 10 Wipe-Clean Flat Panel The flat panel models can be cleaned with only the single pass of a cloth across their smooth surface. The flat panel can also be easily removed for more thorough cleaning. Indoor Unit Quiet Operation Intelligent Eye Programme Dry Function Auto Fan Speed Cleanliness Lifestyle Convenience See page 10 Econo Mode Inverter Powerful Operation Home Leave Operation Indoor Unit On/Off Switch Titanium Apatite Photocatalytic Air-Purifying Filter Mould-Proof Operation Worry Free Timers Wipe-Clean Flat Panel 24-Hour On/Off Timer Night Set Mode Auto-Restart after Power Failure Self-Diagnosis with Digital Display Outdoor Unit Models Worry Comfort Free Control Functions 14 Outdoor Unit Quiet Operation Anticorrosion Treatment of Outdoor Heat Exchanger Fins RKS RKS 25/35G 50/60G RKS 71H Easy-to-Use Wireless Remote Controller Wireless remote controller for FTKS25/35D Econo Mode Selects fan speed and Indoor Unit Quiet Operation On/Off Switch Sets room temperature Selects mode: cooling, dry, fan-only operation Inverter Powerful Operation Vertical Auto-Swing (up and down) Outdoor Unit Quiet Operation Mould-Proof Operation Intelligent Eye Cancels On/Off Timer 24-Hour On Timer Sets clock 24-Hour Off Timer and Night Set Mode Sets timer Wireless remote controller for FTK50/60G Home Leave Operation On/Off Switch Selects fan speed and Indoor Unit Quiet Operation Sets room temperature Selects mode: cooling, dry, fan-only operation Inverter Powerful Operation Vertical Auto-Swing (up and down) Outdoor Unit Quiet Operation Horizontal Auto-Swing (left and right) Intelligent Eye Cancels On/Off Timer 24-Hour On Timer Sets clock 24-Hour Off Timer and Night Set Mode Sets timer 15 Wireless remote controller for FTKS71H Econo Mode Selects fan speed and Indoor Unit Quiet Operation On/Off Switch Sets room temperature Selects mode: cooling, dry, fan-only operation Inverter Powerful Operation Vertical Auto-Swing (up and down) Outdoor Unit Quiet Operation Intelligent Eye Horizontal Auto-Swing (left and right) Comfort Airflow Mode Cancels On/Off Timer 24-Hour On Timer Sets clock 24-Hour Off Timer and Night Set Mode Sets timer 16 Specifications FTKS25/35D Model name Capacity Indoor unit Outdoor unit Rated (Min.-Max.) kW Btu/h Power supply Rated A Running current W Power consumption Rated (Min.-Max.) Rated W/W COP Indoor unit Front panel colour Airflow rate (H) m3/min (cfm) Fan speed Sound levels (H/L/SL) dB (A) Dimensions (H x W x D) mm Machine weight kg Outdoor unit Casing colour Type Compressor W Motor output Refrigerant charge (R-410A) kg Sound levels (H/L) dB (A) Dimensions (H x W x D) mm Machine weight kg Operation range CDB Liquid Piping Gas mm connections Drain Max. piping length m Max. height difference FTKS25DVM RKS25GVMG 2.5 (1.2-3.2) 8,500 (4,050-10,900) 3.9 700 (295-1,050) 3.57 FTKS25DVM 8.7 (307) 37/25/22 RKS25GVMG 0.8 46/43 32 1 phase, 230 V, 50 Hz White 5 steps, quiet and automatic 283 x 800 x 195 9 Ivory white Hermetically sealed swing type 600 550 x 765 x 285 10 to 46 6.4 9.5 18.0 25 15 FTKS35DVM RKS35GVMG 3.5 (1.4-4.0) 11,900 (4,750-13,650) 4.8 1,035 (300-1,400) 3.38 FTKS35DVM 8.9 (314) 39/26/23 RKS35GVMG 1.0 47/44 34 FTKS50/60G and 71H Model name Capacity Indoor unit Outdoor unit Rated (Min.-Max.) kW Btu/h Power supply A Running current Rated W Power consumption Rated (Min.-Max.) Rated W/W COP Indoor unit Front panel colour Airflow rate (H) m3/min (cfm) Fan speed Sound levels (H/L/SL) dB (A) Dimensions (H x W x D) mm Machine weight kg Outdoor unit Casing colour Type Compressor W Motor output Refrigerant charge (R-410A) kg Sound levels (H/L) dB (A) Dimensions (H x W x D) mm Machine weight kg Operation range CDB Liquid Piping Gas mm connections Drain Max. piping length m Max. height difference FTKS50GVMG RKS50GVMG 5.0 (1.7-6.0) 17,100 (5,800-20,500) FTKS71HVMG FTKS60GVMG RKS71HVMG RKS60GVMG 7.1 (2.3-8.5) 6.0 (2.3-6.7) 24,200 (7,800-29,000) 20,500 (7,800-22,900) 1 phase, 230 V, 50 Hz 6.2 9.2 7.8 1,400 (440-2,080) 2,100 (570-3,100) 1,780 (570-3,580) 3.57 3.38 3.37 FTKS50GVMG FTKS60GVMG FTKS71HVMG White 14.7 (519) 21.5 (760) 17.4 (614) 5 steps, quiet and automatic 43/34/31 46/37/34 340 x 1,200 x 240 290 x 1,050 x 238 17 12 RKS50GVMG RKS60GVMG RKS71HVMG Ivory white Hermetically sealed swing type 1,920 1,100 1.5 1.7 2.3 54/49 52/49 47/44 735 x 825 x 300 770 x 900 x 320 47 55 71 10 to 46 6.4 9.5 12.7 15.9 18.0 30 20 Measurement conditions 1. Cooling capacity is based on: indoor temp. 27 CDB, 19 CWB; outdoor temp. 35 CDB; piping length 7.5 m. 2. Sound levels are based on the temperature conditions 1. above. These are anechoic conversion values. These values are normally somewhat higher during actual operation as a result of ambient conditions. 17 Options Indoor unit No. 1 2 3 4 Item Wiring adaptor for time clock/remote controller (Normal open pulse contact/normal open contact) *2 *3 Titanium apatite photocatalytic air-purifying filter Air-purifying filter with photocatalytic deodorising function *3 Remote controller loss prevention with chain FTKS71H FTKS50/60G FTKS25/35D KRP413AB1S KAF970A48 KAF952B42 KAF970A46 KKF917A4 KKF910A4 Notes: *1. A wiring adaptor (KRP413AB1S) is also required for each indoor unit. *2. The time clock and other devices should be obtained locally. *3. The filter is a standard accessory. It should be replaced approximately every 3 years. Titanium apatite photocatalytic air-purifying filter KAF970A46 Remote controller loss prevention with chain KKF917A4 Titanium apatite photocatalytic air-purifying filter KAF952B42 Titanium apatite photocatalytic air-purifying filter KAF970A48 Remote controller loss prevention with chain KKF910A4 Outdoor unit No. 1 2 Item Air direction adjustment grille Drain plug RKS25/35G KPW937A4 Note: *1. One set includes 5 pieces for 5 units. Air direction adjustment grille KPW945A4 Drain plug KKP937A4 RKS50/60G KKP937A4 RKS71H KPW945A4 *1 KKP945A4 Drain plug KKP945A4 Control system No. 1 2 3 4 Item Central remote controller Unified On/Off controller Schedule timer Interface adaptor for DIII-NET use *1 *1 *1 FTKS25/35D Note: *1. Interface adaptor for DIII-NET use (KRP928BB2S) is also required for each indoor unit. Central remote controller DCS302CA61 Unified On/Off controller DCS301BA61 FTKS50/60G DCS302CA61 DCS301BA61 DST301BA61 KRP928BB2S FTKS71H Schedule timer DST301BA61 Specifications are subject to change. 18 Warning Daikin products are manufactured for export to numerous countries throughout the world. Prior to purchase, please confirm with your local authorised importer, distributor and/or retailer whether this product conforms to the applicable standards, and is suitable for use, in the region where the product will be used. This statement does not purport to exclude, restrict or modify the application of any local legislation. Ask a qualified installer or contractor to install this product. Do not try to install the product yourself. Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion. Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or contractor to install those parts and accessories. Use of unauthorised parts and accessories or improper installation of parts and accessories can result in water or refrigerant leakage, electrical shock, fire or explosion. Read the User's Manual carefully before using this product. The User's Manual provides important safety instructions and warnings. Be sure to follow these instructions and warnings. If you have any enquiries, please contact your local importer, distributor and/or retailer. Cautions on product corrosion 1. Air conditioners should not be installed in areas where corrosive gases, such as acid gas or alkaline gas, are produced. 2. If the outdoor unit is to be installed close to the sea shore, direct exposure to the sea breeze should be avoided. If you need to install the outdoor unit close to the sea shore, contact your local distributor. JMI-0107 Organization: DAIKIN INDUSTRIES, LTD. AIR CONDITIONING MANUFACTURING DIVISION Organization: DAIKIN INDUSTRIES (THAILAND) LTD. Scope of Registration: THE DESIGN/DEVELOPMENT AND MANUFACTURE OF COMMERCIAL AIR CONDITIONING, HEATING, COOLING, REFRIGERATING EQUIPMENT, HEATING EQUIPMENT, RESIDENTIAL AIR CONDITIONING EQUIPMENT, HEAT RECLAIM VENTILATION, AIR CLEANING EQUIPMENT, COMPRESSORS AND VALVES. Scope of Registration: THE DESIGN/DEVELOPMENT AND MANUFACTURE OF AIR CONDITIONERS AND THE COMPONENTS INCLUDING COMPRESSORS USED FOR THEM JQA-1452 DAIKIN AIRCONDITIONING (SINGAPORE) PTE. LTD. No. 10 Ang Mo Kio Industrial Park II Singapore 569501 Tel. +65-6-5838888 Fax. +65-6-3497310 / 311 www.daikin.com.sg Specifications, designs and other content appearing in this brochure are current as of August 2016 but subject to change without notice. All of the Daikin Group’s business facilities and subsidiaries in Japan are certified under the ISO 14001 international standard for environment management.