Item:
Project:
Product:
Sage Wallmount
Model: SW- ___- ___ ___- ___ ___
___
06 0
1 03 N
08 1
2 05 R
10 2
3 07
3
10
f
1.Pick a Pressure
06 = 600 psi (41 bar) maximum
08 = 800 psi (55 bar) maximum
10 = 1000 psi (69 bar) maximum
2.Pick a Chemical Injection Method
0 = Soap and Sanitize, Gravity fed (solenoid)
1 = Soap and Sanitize, Pump fed (peristaltic)
2 = Soap only, Gravity fed (solenoid)
3 = Soap only, Pump fed (peristaltic)
3.Pick a Power Supply
1 = 115 Volt, 60 Hertz
2 = 230 Volt, 50 Hertz
3 = 230 Volt, 60 Hertz
4.Pick a Hose Length
03 = 30 feet (9.1 meters)
05 = 50 feet (15.2 meters)
07 = 75 feet (22.9 meters)
10 = 100 feet (30.5 meters)
5.Optional Suffixes
N = No other options
R = Stainless Manual Hose Reel (up to 75’ of hose)
Construction:
Features:
Options:
Stainless steel frame, bracket,
structure, and hardware.
Fully certified and listed as a
pressure washer for commercial
indoor use.
Solenoid Valve
Stainless Float tank with 1” air gap
to prevent backflow.
Leeson commercial electric motor
with manual reset thermal overload
protection.
35 foot (10.7m) power cord with
GFCI and plug.
6 foot (1.8m) water inlet hose, with
3/4” garden hose thread.
Cat Triplex plunger pump.
Vacuum formed ABS cover.
All fluid handling components are
brass,
stainless, or high pressure
Gffdgfgkkfdsg
hose.
In-line water filter protects machine
from debris.
Adjustable Unloader valve allows the
unit to idle and recirculate when the
spray gun is closed.
Pressure Relief Valve maintains a
safe maximum pressure.
Thermal Relief Valve prevents
recirculated water from overheating
while idling by discharging 100ml of
heated water and replacing it with
0
cool water. Discharge occurs at165 F.
AutoChem Feature:
Light
5/16” dia Spray hose, bright
Dfsgkjg
yellow, non-marking, with flex
Gyjgf and 1/4” brass Quick
guards
Disconnect sockets at each end.
Automatically switch from chemical
To rinse at spray gun, by switching
The nozzle from low to high
pressure.
Ergonomic spray gun with stainless
wand, heat insulating grip, and
adjustable nozzle for low/high
pressure and steam/spray.
Note: Chemicals are ONLY applied at
low pressure (about 1/10 of machine
maximum rated pressure).
Opens on demand to allow siphon
action of pump to pull chemical into
system with gravity’s help at
adjustable mix ratio.
Peristaltic Pump
Pulls chemicals against gravity or
over longer distances. Meters
chemicals to specific, adjustable mix
ratios. (230 Volt machines use a
diaphragm pump with similar
features).
Manual Hose Reel
Stainless Steel reel for installation at
machine or remote station Holds up
to 75 feet of hose. Keeps work site
neat and organized.
Specifications
06 Models
08 Models
10 Models
600 PSI (41 bar)
2.9 gpm (11.0 lpm)
1.5 HP motor
12 AMPS @ 115 Volts
800 PSI (55 bar)
2.9 gpm (11.0 lpm)
2.0 HP motor
15 AMPS @ 115 Volts
1000 PSI (69 bar)
2.9 gpm (11.0 lpm)
2.0 HP motor
18 AMPS @ 115 Volts
Master Distributors
Master Distributors
USA & Canada
Middle East
Market Equipment & Repair
7300 Quimby St. Paramount, CA 90733. USA
Tel: +1 562 529 5494 Fax: + 1 562 529 5310
Email: nick@marketequipmentrepair.com
Web: www.marketequipmentrepair.com
United Kingdom
Sage Sanitizing Systems
Unit 4, Cheney Manor Industrial Estate
Swindon, Wiltshire, England SN2 2UD
Tel: + (0)1793 603487 Fax: + 44 (0)1793 603489
Email: sagesales@sagesanitizingsystems.com
Web: www.sagesanitizingsystems.com
Worldwide Manufacturing Facility
Sage Sanitizing Systems
Unit 4, Cheney Manor Industrial Estate
Swindon, Wiltshire, England SN2 2UD
Tel: + (0)1793 603487 Fax: + 44 (0)1793 603489
Email: sagesales@sagesanitizingsystems.com
Web: www.sagesanitizingsystems.com
D & S Exports Inc
24 Broad Street, Norwalk, CT 06851. USA
Tel: +1 203 847 6446 Fax: + 1 203 849 9526
Email: s.straut@dsusa.net
Web: www.dsusa.net
South Asia and Pacific Rim
D & S Exports Pure Support SDN BHD
29-6 Block F2, Jalan PJU 1/42A, Dataran Prima,
47301 Petaling Jaya, Selangor Darul Ehsan, MALAYSIA
Tel: 603 7880 5758 Fax: 603 7880 5760
Email: puresup@dsusa.net
Web: www.dsusa.net
Download PDF