battery operated soldering iron

SOLDERING & DESOLDERING
SI-B162
BATTERY OPERATED SOLDERING IRON
• New switch design with safety cap detent
• Auto power off when cap attached
• Good heat up performance
SI-B162 Battery Operated Soldering Iron has cordless design, free from A/C power cords
and dangerous dangling cords. Ideal for quick repair of circuit boards and electronic
device at anywhere.
• New switch design with safety cap detent for auto power off when cap attached to prevent accidents
due to carelessness.
• Fast heat up performance to reach operating temperature in 15-20 seconds (with alkaline battery).
• Temperature up to 450°C/840°F, maintains soldering temperature at least 300°C/600°F for
one hour (with alkaline battery).
• Small & compact for easy portability.
• Lead free solder wire (1mm diameter) included.
Safety Slide Switch
• Requires 3 x AA Batteries (not included).
Working
Indication
Protective Cap
Battery Cover Plate
Tip
Auto power off
when cap attached
SI-B162
Specifications
Consumption
Max. 8W
Temperature
Max. 450°C (with alkaline battery)
Time to reach
operating temperature
Battery
in 15-20 seconds (with alkaline battery)
3 x 1.5V alkaline AA (not included)
OAL
178mm / 7” (without cap)
Lead free solder wire: 9SI-B162-W
Accessories
Replacement tip: 9SI-B162-T
Warning
This product contains, or when used for soldering or similar
application, produces chemicals known to the state of california to
cause cancer and birth defects (or other productive harm).
Picture for reference only. Please check with distributor for exact offers. All specifications are subject to change without notice.
Eclipse Enterprises, Inc.
13302 Chula Road, Amelia Court House, VA 23002
Phone: 804-561-2610 Fax: 804-561-2642 Web Site: www.eclipsetools.com
©2016 Prokit's Industries Co., LTD. All rights reserved 201607