Owner’s Manual
Contents
Model Identification............................ 2
Important safety instructions.... 3
Precautions to avoid possible
exposure to excessive
microwave energy.................... 4
Heavy Duty Commercial
Compact [0.6 Cubic Foot]
Microwave Oven
Keep these instructions for future reference.
If the oven changes ownership, this manual must
accompany oven.
Grounding/Earthing Instructions......... 5
Installation.......................................... 6
Antenna Shield Installation.................7
Display and Features Style 1............. 8
Operation Style 1............................. 10
Programming Style 1.........................11
Options Style 1................................. 12
Display and Features Style 2........... 13
Operation Style 2............................. 14
Programming Style 2........................ 16
Options Style 2................................. 17
Cooking Instructions......................... 18
USB Instructions...............................19
Care and Cleaning........................... 20
Before Calling for Service................ 22
Model Identification
When contacting ACP, provide product information.
Product information is located on oven serial plate.
Record the following information:
Any questions or to locate an authorized service
agent contact ACP, Inc. ComServ Customer Service
at: Phone 866.426.2621 / 319.368.8195 or email:
commercialservice@acpsolutions.com. Warranty service
must be performed by an authorized servicer. ACP also
recommends contacting an authorized servicer if service
is required after warranty expires.
Model Number:______________________________
Manufacturing Number:________________________
Serial or S/N Number:_________________________
Date of purchase:____________________________
Dealer’s name and address:____________________
__________________________________________
__________________________________________
__________________________________________
Keep a copy of sales receipt for future reference or in
case warranty service is required.
2
IMPORTANT SAFETY INSTRUCTIONS
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
!
WARNING
When using electrical oven, basic safety precautions should be followed to reduce the risk of burns, electric shock,
fire, or injury to persons or exposure to excessive microwave energy.
1. READ all instructions before using oven.
9. DO NOT operate this oven if it has a damaged
cord or plug, if it is not working properly, or if it has
been damaged or dropped.
2. READ AND FOLLOW the specific “PRECAUTIONS
TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE
MICROWAVE ENERGY” on page 4.
3. This oven MUST BE GROUNDED. Connect only to
properly GROUNDED outlet. See “GROUNDING
INSTRUCTIONS” on page 7.
10. This oven, including power cord, must be serviced
ONLY by qualified service personnel. Special tools
are required to service oven. Contact nearest
authorized service facility for examination, repair,
or adjustment.
4. Install or locate this oven ONLY in accordance with
the installation instructions in this manual.
11. DO NOT cover or block filter or other openings
on oven.
5. Some products such as whole eggs and sealed containers – for example, closed glass jars – may
explode and SHOULD NOT be HEATED in this
oven.
12. DO NOT store this oven outdoors. DO NOT
use this product near water – for example, near
a kitchen sink, in a wet basement, or near a
swimming pool, and the like.
6. Use this oven ONLY for its intended use as described in this manual. Do not use corrosive chemicals or vapors in this oven. This type of oven
is specifically designed to heat or cook. It is not
designed for industrial or laboratory use.
13. DO NOT immerse cord or plug in water.
14. Keep cord AWAY from HEATED surfaces.
15. DO NOT let cord hang over edge of table or
counter.
7. As with any oven, CLOSE SUPERVISION is
necessary when used by CHILDREN.
16. See door cleaning instructions in “Care and
Cleaning” section of manual on page 17.
8. If smoke is observed, switch off or unplug the
appliance and keep the door closed in order to stifle
any flames.
!
17. For commercial use only.
WARNING
To reduce the risk of fire in the oven cavity:
a. DO NOT overcook food. Carefully attend oven if
paper, plastic, or other combustible materials are
placed inside the oven to facilitate cooking.
c. KEEP oven DOOR CLOSED, turn oven off, and
disconnect the power cord, or shut off power at
the fuse or circuit breaker panel, if materials inside
the oven should ignite. Fire may spread if door is
opened.
d. DO NOT use the cavity for storage. DO NOT leave
paper products, cooking utensils, or food in the
cavity when not in use.
b. Remove wire twist-ties from paper or plastic bags
before placing bag in oven.
SAVE THESE INSTRUCTIONS
3
IMPORTANT SAFETY INSTRUCTIONS
!
CAUTION
To avoid personal injury or property damage, observe the following:
1. Briskly stir or pour liquids before cooking with microwave energy to prevent spontaneous boiling
or eruption. Do not overheat. If air is not mixed into a liquid, liquid can erupt in oven or after
removal from oven.
7. Do not use regular cooking thermometers in oven.
Most cooking thermometers contain mercury
and may cause an electrical arc, malfunction, or
damage to oven.
8. Do not heat baby bottles in oven.
2. Do not deep fat fry in oven. Fat could overheat and
be hazardous to handle.
9. Do not use metal utensils in oven.
3. Do not cook or reheat eggs in shell or with an unbroken yolk using microwave energy. Pressure
may build up and erupt. Pierce yolk with fork or
knife before cooking.
4. Pierce skin of potatoes, tomatoes, and similar
foods before cooking with microwave energy.
When skin is pierced, steam escapes evenly.
10. Never use paper, plastic, or other combustible
materials that are not intended for cooking.
11. When cooking with paper, plastic, or other
combustible materials, follow manufacturer’s
recommendations on product use.
12. Do not use paper towels which contain nylon or other synthetic fibers. Heated synthetics could
melt and cause paper to ignite.
5. Do not operate oven without load or food in oven
cavity.
13. Do not heat sealed containers or plastic bags in oven. Food or liquid could expand quickly and
cause container or bag to break. Pierce or open
container or bag before cooking.
6. Use only popcorn in packages designed and labeled for microwave use. Popping time varies
depending on oven wattage. Do not continue
to heat after popping has stopped. Popcorn will
scorch or burn. Do not leave oven unattended.
14. To avoid pacemaker malfunction, consult
physician or pacemaker manufacture about
effects of microwave energy on pacemaker.
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO
EXCESSIVE MICROWAVE ENERGY
a. DO NOT attempt to operate this oven with door
open since open-door operation can result in
harmful exposure to microwave energy. It is
important not to defeat or tamper with safety
interlocks.
c. DO NOT operate oven if it is damaged. It is
particularly important that oven door close properly
and that there is no damage to: (1) door (bent), (2)
hinges and latches (broken or loosened), (3) door
seals and sealing surfaces.
b. DO NOT place any object between oven front
face and door or allow soil or cleaner residue to
accumulate on sealing surfaces.
d. Oven should NOT be adjusted or repaired by
anyone except properly qualified service personnel.
SAVE THESE INSTRUCTIONS
4
Grounding Instructions
Earthing Instructions
WARNING
Oven MUST be earthed. Earthing reduces risk of
electric shock by providing an escape wire for the
electric current, if an electrical short occurs. This oven is
equipped with a cord having a earth wire with a earthing
plug. The plug must be plugged into an outlet that is
properly installed and earthed.
To avoid risk of electrical shock or death, this oven
must be grounded.
WARNING
Consult a qualified electrician or servicer if earthing
instructions are not completely understood, or if doubt
exists as to whether the oven is properly earthed.
To avoid risk of electrical shock or death, do not alter
the plug.
Do not use an extension cord.
If the product power cord is too short, have a qualified
electrician install a new receptacle close enough to the
oven to plug the oven in. This oven should be plugged
into a separate circuit with the electrical rating as
provided in product specifications (available on www.
acpsolutions.com). When a microwave oven is on a
circuit with other equipment, an increase in cooking
times may be required and fuses can be blown.
This oven MUST be grounded. In the event of an
electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the
electric current. This oven is equipped with a cord
having a grounding wire with a grounding plug. The plug
must be plugged into an outlet that is properly installed
and grounded.
Consult a qualified electrician or servicer if grounding
instructions are not completely understood, or if doubt
exists as to whether the oven is properly grounded.
External Equipotential Earthing Terminal
(export only)
Equipment has secondary earthing terminal. Terminal
provides external earthing connection used in addition
to earthing prong on plug. Located on outside of oven
back, terminal is marked with symbol shown below.
Do not use an extension cord. If the product power
cord is too short, have a qualified electrician install a
three-slot receptacle. This oven should be plugged into
a separate circuit with the electrical rating as shown on
the oven’s serial plate / rating label. When a microwave
oven is on a circuit with other equipment, an increase in
cooking times may be required and fuses can be blown.
5
Installation
WARNING
Unpacking Oven
• Inspect oven for damage such as dents in door or
dents inside oven cavity.
• Report any dents or breakage to source of purchase
immediately. Do not attempt to use oven if damaged.
• Remove all materials from oven interior.
• If oven has been stored in extremely cold area, wait a
few hours before connecting power.
Excessive Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
Oven Placement
Radio Interference
• Do not install oven next to or above source of heat,
such as pizza oven or deep fat fryer. This could cause
microwave oven to operate improperly and could
shorten life of electrical parts.
• Do not block or obstruct oven filter. Allow access for
cleaning.
• Install oven on level countertop surface.
Microwave operation may cause interference to radio,
television. Reduce or eliminate interference by doing the
following:
• Clean door and sealing surfaces of oven according to
instructions in “Care and Cleaning” section.
A—Allow at least 7 “ (17.8 cm) of clearance around top and
sides of oven. Proper air flow around oven cools electrical
components. With restricted air flow, oven may not operate
properly and life of electrical parts is reduced.
B—Allow at least 2 9/16 “ (6.5 cm) between air discharge on
back of oven and back wall.
Oven Clearances
6
Antenna Shield Installation
1. Position shield with “This Side Up.”
2. After assembly, the 4 pins need to be inserted through the holes.
2
1
3. Insert shield into cavity at an angle.
4. Insert the shield so it is level and push it upwards so the rear and side pins pop in the holes. You may need to move the shield back and forth slightly to engage all the holes.
3
4
Proper Installation Check:
1.
2.
3.
4.
Using both hands, crisscross arms and press both tabs outward at the same time using thumbs.
Tabs should flex outward into the holes.
If not - reassemble pins to holes correctly.
Using finger, pull downward on shield to assure all pins are engaged in cavity holes and shield is securely installed.
1
Push tabs outward at same time
2
7
Display and Features
NOTE: There are two styles of controls shown Style 1 and Style 2 choose the control that
matches unit
STYLE 1
Time Entry
Power Level Stop / Reset
Quantity
Start
TIME ENTRY pad is used to enter
cooking time for either manual entry
or programming. Cooking time ranges
from 1 second (00:01) to a total of 60
minutes (60:00) over four stages. If more
than 60 minutes of total microwave cooking time
is required, open door and inspect food before
beginning new cooking cycle. Display (some models)
Some items in display can
be seen but will not glow.
Stages
This oven can be programmed to run 4 cooking
sequences consecutively. Each sequence is called
a stage. For example, the first cycle could be
programmed to defrost at 60% power, the second
to defrost at 30% power, the third to heat at 100%
power, and the fourth to hold warm at 10% power.
Total time for all cooking stages counts down.
Numbered pads begin cooking
programs or enter times and
power levels for “Manual Time ..
Entry” cooking.
User Options
User Options allow the user to program the oven
to perform in a way convenient to the user. The
beeps, maximum cooking time, and number of preprogrammed cooking sequences can be changed.
POWER LEVEL pad is used to set
microwave power level. When cooking, the
power level can be decreased for foods that require
slower more even cooking. Microwave power levels
range from 0% to 100% in 10% increments. If
cooking time is set and START pad pressed, oven
cooks at 100% power. When programming, to reset
power level to 100%, press POWER LEVEL pad.
X2 Pad
The X2 Pad increases a preset cooking time
by a percentage of
the original cooking time. The user specifies the
percentage and it can be changed for individual
cooking sequences. This feature is very useful
for cooking multiple servings of foods such as
potatoes or slices of pizza.
START pad begins Manual Time Entry
cooking or restarts an interrupted cooking
cycle. When programming, use to save time
and power level, and to advance to next
user option.
STOP/ RESET pad exits programming
mode and stop cooking during cooking
cycle.
8
Display and Features
STYLE 1
Cooking Methods
MEMORY PADS
This oven can of store either 10 or 100 cooking
programs in memory.
MANUAL TIME ENTRY
Manual Time Entry feature allows the operator
to heat without changing the preprogrammed
pads. Time must be entered and power can be
Single Pad Cooking
From the factory, it is programmed to store 10
cooking programs. Each pad begins a cooking
program.
set before cooking. START
to begin cooking.
pad must be pressed
Double Pad Cooking
The oven control can be changed to
store up to 100 cooking programs. To
set the control to 100 cooking programs,
see the “User’s Options” section of
this manual. To heat when the oven
is set for 100 programs , press 2 memory pads. For
example, to start the first program, press pad 0, then
pad 1. To use the second program, press pad 0, then
pad 2. After the pads are pressed, the oven starts
automatically and time counts down.
Cooking Displays
Programming Displays
This display indicates
oven is in programming
mode and ready to
program a numbered
pad(s).
READY shows when oven
control will accept entries.
14:37 shows
PI --
This display indicates
oven is set to double pad
entry and 2 pads must be
pressed to enter a program.
See “Programming” section of manual for programming
procedure or “User Options” to change from single or
double pad entry.
cooking time.
When more than
one cooking stage
is programmed,
total time for all stages
displays. COOKING Shows when microwave energy
is generated. % MW POWER shows when oven is
operating. 50 indicates the microwave power level
used. If number does not show, oven is cooking at
100% power.
This display shows briefly
when programming more
than one stage. It indicates
programming mode for
pad 02. Press Time Entry
to choose stage to be programmed.
P02
This display indicates
programming user
options mode. See
“User Options”
section of manual for
programming procedure.
9
Operation
STYLE 1
Interrupting Operation
Open oven door or press STOP/RESET pad
interrupt operation. Display continues to show
countdown time. Close door and press START
to resume oven operation.
Double Pad Programs
The oven control can be changed to
store up to 100 cooking programs.
See the “User’s Options” section of this
manual to change oven control.
to
pad
To start a double pad cooking program, press 2 memory
pads. For example, press pad 0 and pad 3 to start a
cooking program.
Canceling Mistakes
If oven is not cooking, press STOP/RESET
pad to
clear display. If oven is cooking, press STOP/RESET
pad once to stop oven, then again to clear display. If
oven door is open and time shows in display, close oven
door and press STOP/RESET pad to clear display.
Manual Time Entry
Manual Time Entry feature allows the operator
to enter time and power levels, and heat without
changing the preprogrammed pads. Example: Heat for
30 seconds at 80% power.
1. Open oven door, place food in oven, and close door.
• Display shows “READY”. Fan and light operate.
• If pad is not pressed in 60 seconds, open and
close oven door again.
Operating Preprogrammed Pads
From the factory, this oven can of store up to 10
preprogrammed cooking sequences in memory.
To heat using a preprogrammed sequence,
press a numbered pad. Oven starts to heat
automatically. Example: Heat using the third cooking
sequence.
1. Open oven door, place food in oven, and close oven
door.
• Display shows “READY”.
• If pad is not pressed in 60 seconds, open and
close oven door again.
2. Press 3 pad.
• Oven operates and time counts down.
• Display shows cooking time, “STAGE 1”,
”COOKING”. Display shows “COOKING” only
when microwave energy is present.
• If power level other than 100 percent power
was programmed, display shows “STAGE 1”,
“COOKING” and “% MW POWER”.
• If additional cooking time is required, press
preprogrammed pads before or after cooking cycle
ends.
3. Oven stops cooking and oven signal sounds when
cooking timing elapses.
2. Press TIME ENTRY
pad.
• Display shows “00:00” and “READY”.
3. Press 3 and 0 pad to enter cooking time.
4. Press POWER LEVEL
pad to change
power level.
• Display shows “% MW POWER” and current
power level if other than 100 percent power.
5. Press 8 pad to enter desired power level.
6. Press START
pad.
• Oven operates and time counts down.
• Display shows cooking time, “COOKING”, “% MW
POWER”.
• Display shows “COOKING” only when microwave
energy is present.
• If power level other than 100 percent power was
programmed, display shows “COOKING” and “%
MW POWER”. Display counts down cooking time.
7. Oven stops cooking and oven signal sounds when
cooking timing elapses and display shows “DONE”.
Preprogrammed Times and Cook Level
All preprogrammed pads arrive set at full power.
10
Programming
STYLE 1
Memory Pads
Multiple Cooking Stages
From the factory, this oven can of store up to 10
cooking programs. Follow instructions below to program
cooking times and power levels for customized cooking.
Example: Program third cooking sequence to heat for 30
seconds at 80% power.
1. Open oven door.
• Display shows “DOOR”.
• If door is closed or STOP/RESET
pad is
pressed before finishing programming sequence,
oven exits programming mode.
2. Press and hold pad 1 for approximately 5 seconds.
• After 5 seconds, signal sounds. Display shows
“PROGRAM”.
3. Press 3 pad to select memory pad.
• Display shows cooking time, “STAGE 1” and
power level if other than 100 percent power.
4. Press 3 and 0 pad to enter desired cooking time.
Follow instructions below to program oven to perform
four consecutive cooking cycles without interruption.
Example: Program third cooking sequence to heat for 30
seconds at 80% power, 40 seconds at 50% power, and
10 seconds at 100% power.
1. Open oven door.
• Display shows “READY”.
• If door is closed or STOP/RESET
pad is
pressed before finishing programming sequence,
oven exits programming mode.
2. Press pad 1 for approximately 5 seconds.
• After 5 seconds, signal sounds. Display shows
“PROGRAM”.
3. Press 3 pad to select memory pad.
• Display shows “P03”briefly then cooking time,
“STAGE 1” and power level if other than 100
percent power.
4. Press 3 and 0 to enter desired cooking time.
5. Press POWER LEVEL
pad to change
power level.
• Display shows cooking time and current power
level if other than 100 percent power.
6. Press 8 pad to enter desired power level.
Note: Press POWER LEVEL
twice to reset to
100% power.
7. Press START
5. Press POWER LEVEL
pad to change
power level.
• Display shows “% MW POWER” and current
power level if other than 100 percent power.
6. Press 8 pad to enter desired power level.
pad to save new cooking time
7. Press TIME ENTRY
pad.
• Display shows cooking time, and “STAGE 2”
indicating programming stage 2 and power level
for stage shown in display.
• Repeat steps 5–8 to create additional stages.
and power level in oven memory.
• Display shows “PROGRAM”.
• Repeat step 3–8 to program additional pads.
8.Press STOP/RESET
pad or close oven door
8. Press START
pad to save new cooking time
and power level in oven memory.
to exit programming mode.
9. Press STOP/RESET
Double Pad Programs
The oven control can be changed to store up to 100
cooking programs. See the “User’s Options” section of
this manual to change oven control.
to exit programming mode.
To create a double pad program, follow the instructions
above except for a change to step #3. When entering
the cooking program number, press 2 memory pads.
For example, press pads 0 and pad 3 to create a new
cooking program.
11
pad or close oven door
Options
STYLE 1
3. Press 9 pad.
• See table for options.
• Displays shows “OP:90”.
• “OP” represents optional program mode, first
number represents option number and second
number represents functions currently selected for
option.
4. Press 9 pad repeatedly to change setting. User Options
Follow the instructions below to customized the
microwave oven’s operation. End-of-cycle signal,
maximum cooking time and other options can be
changed to meeting your cooking needs. Example:
Change setting to single digit pad operation.
1. Open oven door.
• If door is closed or STOP/ RESET
5. Press START
pad is
• Repeat steps 3-5 to change additional options.
• Changes appear after door is closed or STOP/
RESET is pressed.
pressed before finishing programming sequence,
oven exits programming mode.
2. Press and hold pad 2 for approximately 5 seconds.
• After 5 seconds, signal sounds. Display shows
“OPTIONS”.
Numbered Pads
pad to save changes.
6. Press STOP/RESET
pad or close oven door
to exit programming mode.
Display
Options ( Factory Settings in Bold)
1
OP:10
3 second continuous beep
End of Cycle Beep
OP:11
Continuous beep until door is opened
OP:12
5 beeps bursts until door is opened
2
OP:20
Eliminates beep
Speaker Volume
OP:21
Sets volume to low
OP:22
Sets volume to medium
OP:23
Sets volume to high
3
OP:30
Prevents beep when pad is pressed.
Key Beep
OP:31
Allows beep when pad is pressed.
4
OP:40
15 seconds after oven door is opened, keyboard disabled
Keyboard Enable
Window
OP:41
30 seconds after oven door is opened, keyboard disabled
OP:42
1 minute after oven door is opened, keyboard disabled
OP:43
2 minutes after oven door is opened, keyboard disabled
5
OP:50
Prevents adding heating time while oven is heating.
Add Time during
Heating
OP:51
Allows adding heating time while oven is heating when a
memory pad is pressed.
6
OP:60
Cancels heating time count down after door is opened during
cycle.
OP:61
Allows oven to resume heating time countdown after door is
opened during cycle.
Reset Door Open
7
OP:70
Allows 60 minutes of heating time.
Maximum Heating
Time
OP:71
Allows 10 minutes of heating time.
8
OP:80
Allows use of preprogrammed pads only.
Manual Operation
OP:81
Allows use of manual time entry and preprogrammed pads.
9
OP:90
Allows 10 (0-9) preprogrammed pads.
Double Digit
Operation
OP:91
Allows 100 (00-99) preprogrammed pads.
0
OP:00
Do not display message.
Clean Filter
OP:01
Display message for 24 hours every 7 days.
Message
OP:02
Display message for 24 hours every 30 days.
OP:03
Display message for 24 hours every 90 days.
12
Display and Features
STYLE 2
X
Single Pad Programming
Start Pad
The start pad is used
to begin a manual time
entry cooking cycle. It is
also used to save any changes to
programming sequences or user
options.
This feature enables each numbered pad to be programmed
for a specific use, such as cooking a certain number of
potatoes or defrosting and then cooking vegetables or other
frozen foods. To use this feature, simply program the pad to the desired
length of time and power level. To use this feature, press the pad once and
the microwave will begin cooking.
Double Pad Programming
STOP/RESET pad
This feature enables 100 programmed entries to be
made. Each entry will be assigned a double digit number,
for example 01, 05, or 20. When using the double pad programming, two
pads must be pressed to start the cooking cycle.
The STOP/RESET pad
stops a cooking sequence
in progress, clears out any
remaining time, and also ends a
Manual Time Entry
programming or user option cycle.
In addition to programmable pads, this microwave also accepts
When the STOP/RESET pad is
specific time entry by using the TIME ENTRY pad. Using manual time entry
used to end a programming or
does not affect the programmed buttons.
option change, the changes are
discarded.
X2 Pad
The X2 Pad increases a preset cooking time by a percentage of
the original cooking time. The user specifies the percentage and it can be
changed for individual cooking sequences. This feature is very useful for
cooking multiple servings of foods such as potatoes or slices of pizza.
Stage Cooking
Stage cooking is a cooking sequence with specific power
stage changes. The user can program up to four different power level
changes and the specific amount of cooking time at each power level. Each
power level/cooking time combination is known as a stage. Up to four stages
can be programmed.
User Options
This microwave can be set for specific user preferences.
Options such as beep volume, maximum cooking time, and the number of
programmable pads can be changed. To change different options, see User
Options in this manual.
13
Operation
STYLE 2
Cooking Display
DISPLAYS
DESCRIPTION
READY
READY displays when oven control will accept
entries.
00:00
Displays cooking time. If stage cooking is
programmed, total cooking time is displayed.
COOK LEVEL
COOK LEVEL displays while oven is operating.
The cooking level is displayed above as a number 1
through 9. If no number is displayed, the oven is
cooking at full power.
POWER is displayed while the oven is generating
microwave energy during a cooking cycle.
POWER
There are words in
the display that never
actually display.
The display is used for
many different models of
microwaves. Depending on the model,
certain words or symbols may never be
highlighted or become visible.
Programming Display
DISPLAYS
DESCRIPTION
P:0
P:
OP: -CF:
Displays when oven is in programming mode for
single pad memory only.
Displays when oven is in programming mode for
double pad memory.
Displays when oven is in user option mode. User
options can then be set or specified.
Displays with a numerical cooking factor when the
X2 pad is pressed.
Displays briefly when programming a specific
cooking stage. Number (1 through 4) indicates
the stage that is being programmed.
P:--1
Stainless Steal
Outer Case
Oven Display
Oven Control
Pads
USB Port
(Some Models)
Oven Door Window
(Some Models)
Self-sealing Base
Rear Air Vents
(some models)
Removeable
Splatter Shield
(Not Shown)
Door Handle
(Pull to open)
5' 6" Power Cord
Oven Cavity Light
(Some Models)
14
Operation
STYLE 2
Interrupting
Operation
Open oven door or press
STOP/RESET pad to
interrupt operation. Display
continues to show countdown time.
Close door and press START pad
to resume oven operation.
Canceling Mistakes
•
•
•
If oven is not cooking, press
STOP/RESET pad to clear display.
If oven is cooking, press
STOP/RESET pad once to stop
oven, then again to clear display.
If oven door is open and time
shows in display, close oven
door and press STOP/RESET
pad to clear display.
X2 Pad
Manual Time Entry
To cook food using a specific entered time and power level.
1. Open oven door and place food in oven. Close door.
• READY displays. Fan and light will turn on.
2. Press TIME ENTRY pad.
• READY and 00:00 display.
• If pad does not work, open and close oven door and try
again.
3. Enter cooking time by using the numbered pads.
4. Press POWER LEVEL pad to change power level.
• COOK LEVEL displays with the power setting.
• If a number is not displayed with COOK LEVEL the
microwave is set to full power.
• Press a number pad to adjust power level to desired setting.
5. Press TIME ENTRY pad.
• Display changes to cook time and power level for the next stage.
6. Enter cook time and power level as in steps 3 and 4.
• To add another cooking stage press TIME ENTRY pad again.
• Up to four different stages can be programmed.
7. Press START pad.
• Oven operates and time counts down.
• POWER, COOK LEVEL and cooking time display.
Preprogrammed Pads
To increase cooking time
when cooking more than one serving.
To cook food using pads preprogrammed with cooking
sequences.
1. Open oven door and place food
in oven. Close door.
• READY displays. Fan and
light will turn on.
2. Press X2 pad.
• Amount of time added is a
percentage of the original
preprogrammed cooking time.
• The percentage can be
changed. See Programming
section in this manual.
3. Press desired preprogrammed pad.
4. Oven begins cooking. Displayed
cooking time is the total of original
cooking time and added X2 time.
1. Open oven door and place food in oven. Close door.
• READY displays. Fan and light will turn on.
2. Press desired pad.
• For single pad entry, press only one pad.
• For double pad entry, press the two pads, in order,
of the double digit number for the desired cooking
sequence.
• To change single or double pad entry option see
User Options section in this manual.
3. Oven begins to cook.
• POWER, COOK LEVEL and total cooking time display.
• For additional cooking time, press preprogrammed pad again
to begin cooking sequence again.
Factory Settings
15
Programming
STYLE 2
Programming Pads
Oven is shipped from the factory for single pad programming. To change
the oven default to allow double pad programming, see User Options.
To change the amount of time or the power level for a preset pad:
1. Open oven door.
• READY displays.
• If door is closed or RESET pad is pressed before programming
is complete, changes are discarded and microwave exits
programming mode.
2. Press and hold pad 1 for approximately 5 seconds.
• This begins programming mode.
• Microwave will beep and P:0 displays. Oven is in
programming mode.
3. Press pad to be reprogrammed.
• Press two digits if reprogramming a double pad program.
• COOK LEVEL and cooking time display.
• A number displays with COOK LEVEL if it is less than full power.
4. Enter cooking time by using the number pads.
5. Press POWER LEVEL pad to change power level if desired.
• Use the number pads to change power level to a lower
power setting.
6. Press START pad to set new programming to the pad.
• If START is not pressed, changes will not be saved.
•P:0 displays
7. Press STOP/RESET pad or close oven door to exit
programming mode.
Programming Multiple Stages
Stage cooking allows consecutive cooking cycles without interruption.
Up to four different cooking cycles can be programmed into a memory
pad. To use stage cooking:
1. Follow steps 1 through 5 above.
6. Press TIME ENTRY pad.
• Display briefly shows the pad number that is being
programmed and the stage number to the upper right.
• Display changes to cook time and power level for the next stage.
7. Enter cook time and power level as in steps 4 and 5.
• To enter another cooking stage for that pad, press TIME ENTRY
pad again.
• Up to four different stages can be programmed.
8. Press START pad to set new programming changes to the pad.
16
X2 Programming
This feature allows a preset
percentage of original cook
time, called a cooking factor, to be
added to a cook sequence.
To change the cooking factor:
1. Open oven door.
2. Press and hold pad 1 for
approximately 5 seconds.
3. Press pad to be reprogrammed.
4. Press the X2 pad.
5. Press a numbered pad to
change the cooking factor.
• Pad 5 would change the
cooking factor to 50%.
• Pad 3 would change the
cooking factor to 30%.
6. Press START pad to save changes.
Options
STYLE 2
Didn’t like an option?
Factory settings are marked in bold. To
change the oven back to the factory
setting, simply select the option that is
marked in bold.
My changes weren’t
saved.
In order for any changes to be
saved, the START pad must
be pressed after selecting
an option. Shutting the oven door or
pressing the STOP/RESET pad will not
Numbered Pads
Changing user options
Options such as single or double pad programming, beep volume, and
maximum cooking time can be changed to suit individual preferences.
To change options:
1. Open oven door.
• If door is closed or RESET pad is pressed before programming is
complete, changes are discarded and microwave exits programming
mode.
2. Press and hold pad 2 for approximately 5 seconds.
• This begins options mode.
• Microwave will beep and 0P: displays. Microwave is now in
programming mode.
3. Press number pad that controls option to be changed.
• See table below for options.
• Current option will display.
4. Press number pad again to change the option.
• Each time pad is pressed, option will change.
• Match code displayed with code for desired option.
5. Press START pad to save changes.
• To change additional options, repeat steps 3 and 4.
• Changes appear after door is closed or STOP/RESET pad is pressed.
Display
Options ( Factory Settings in Bold)
1
OP:10
3 second continuous beep
End of Cycle Beep
OP:11
Continuous beep until door is opened
OP:12
5 beeps bursts until door is opened
2
OP:20
Eliminates beep
Speaker Volume
OP:21
Sets volume to low
OP:22
Sets volume to medium
OP:23
Sets volume to high
3
OP:30
Prevents beep when pad is pressed.
Key Beep
OP:31
Allows beep when pad is pressed.
4
OP:40
15 seconds after oven door is opened, keyboard disabled
Keyboard Enable
Window
OP:41
30 seconds after oven door is opened, keyboard disabled
OP:42
1 minute after oven door is opened, keyboard disabled
OP:43
2 minutes after oven door is opened, keyboard disabled
5
OP:50
Prevents adding heating time while oven is heating.
Add Time during
Heating
OP:51
Allows adding heating time while oven is heating when a
memory pad is pressed.
6
OP:60
Cancels heating time count down after door is opened during
cycle.
OP:61
Allows oven to resume heating time countdown after door is
opened during cycle.
Reset Door Open
7
OP:70
Allows 60 minutes of heating time.
Maximum Heating
Time
OP:71
Allows 10 minutes of heating time.
8
OP:80
Allows use of preprogrammed pads only.
Manual Operation
OP:81
Allows use of manual time entry and preprogrammed pads.
9
OP:90
Allows 10 (0-9) preprogrammed pads.
Double Digit
Operation
OP:91
Allows 100 (00-99) preprogrammed pads.
0
OP:00
Do not display message.
Clean Filter
OP:01
Display message for 24 hours every 7 days.
Message
OP:02
Display message for 24 hours every 30 days.
OP:03
Display message for 24 hours every 90 days.
17
Cooking Instructions
1. Cooking Vessels
a) Always heat or cook food items in covered containers to accomplish:
•E ven cooking results and temperatures
•A cleaner oven interior and prevention of food splatters
b) Ceramic, paper, china, styrofoam, glass and plastic are suitable materials for use in microwave ovens.
A high temperature resistant amber pan is recommended for ALL items, especially those high in fat or
sugar content, as these ingredients get hot very quickly.
2. Food Temperature
a) To reach a mandatory serving temperature, frozen foods require a longer cook time than refrigerated items.
b) Refrigerated items:
• Items stored at 40°F (4°C) in the refrigerator should be covered while heated; except breads, pastries or
any products with a breaded coating, which should be heated uncovered to avoid softening.
c) Room temperature items:
• Foods held at room temperature, such as canned items or vegetables, will require less time to heat
than refrigerated items.
d) Conventionally prepared foods should be slightly undercooked to prevent overcooking when rethermed by
microwave steaming.
e) After a steaming cycle has been completed, internal food temperatures continue to slightly rise due to the
presence of steam.
3. Structure of Food
a) Food items that are high in fat, sugar, salt and moisture attract and quickly absorb microwave energy,
allowing for a shorter cook time.
b) Items high in protein or fiber require a longer cook time, due to a slower absorption of microwave energy.
4. Quantity
a) As the mass of food increases, so will the necessary cook time.
Refer to and comply with all USDA/FDA Food Code guidelines when cooking or heating food items.
17
18
USB Flash Drive Instructions
Note: Not all ovens have a USB port. Port is compatible
with a standard USB flash drive.
1. Locate the USB plug cover on left side of oven remove
cover and insert the USB flash drive.
2. Open the oven door.
3. Press and hold the 5 pad until USb appears in the
display.
4. To transfer programming FROM the USB flash drive
to the oven, press the 1 pad. “USb TO OVEN” will
appear in display.
OR
To transfer programming TO the USB flash drive
from the oven, press the 2 pad. “OVEN TO USb” will
appear in display.
5.Press START pad
, to begin transfer.
6. Oven displays “LOADING” in the display for approximately 10 seconds.
7. When the transfer is complete the display will read
"DONE".
8. Press any pad to clear the display or shut the door
and the display will read "READY A or READY b".
Error Codes:
1. NO USb: Remove flash drive from USB and reinsert
flash drive into USB and retry.
2. RESET OVEN: Unplug oven from outlet and plug in
oven and retry transfer.
19
Care and Cleaning
!
CAUTION
To avoid electrical shock which can cause personal injury, unplug power cord or open circuit breaker to oven
before cleaning or removing light bulb.
Part
Description
Interior, Exterior, and Door
Clean microwave oven with mild detergent in warm water using soft
sponge or cloth. Wring sponge or cloth to remove excess water before
wiping equipment. If desired, boil a cup of water in microwave oven to
loosen soil before cleaning.
Important:
•
Do not use abrasive cleansers or cleaners containing ammonia.
These could damage finish.
• Never pour water into microwave oven bottom.
•
Discharge Air Vents
Discharge Air Vents
Control Panel
Do not use water pressure type cleaning systems.
Check monthly for a buildup of cooking vapors along intake and discharge
louvers on bottom and back of oven. Clean air vents with damp cloth to
ensure proper airflow. Dry thoroughly.
Open oven door to deactivate oven timer. Clean with mild detergent in
warm water using soft sponge or cloth.
20
Part
Description
A ir I nta k e F ilte r
F ilte r is loc a te d be low ove n door. C le a n a ir inta k e filte r we e k ly for prope r
airflow. Wash filter in hot water and mild detergent. Do not use oven
without filter in place. Remove filter to clean.
Important
To avoid overheating and oven damage, clean air filter regularly.
1. Grasp filter tab and pull forward. Filter will release from retaining clips.
2. To reinstall, place bottom of filter in clips and push top of filter into
position.
Spla tte r S hie lds
S pla tte r s hie ld k e e ps top of mic rowa ve ove n c a vity a nd a nte nna from
becoming soiled. Clean soil from shield with damp cloth or clean with mild
detergent and water. Remove splatter shield for easy cleaning.
Removing Splatter Shield
1. Unplug oven before removing splatter shield to stop antenna from
rotating.
2. Place fingers behind shield, pull forward, and down.
• When removing and replacing splatter shield, be careful not to bend
antenna.
Shield
up side down
Shield in
correctly
• If a gap for fingers behind splatter shield does not exist, push up on
splatter shield front. Splatter shield may not be installed fully and
cannot be removed until splatter shield front is properly installed.
3. Reinstall splatter shield by placing front tabs over lip at top of oven
cavity front. Lift back of shield until shield snaps into place.
4. Reconnect power to oven.
Changing Oven Light Bulb
Note:
Some models in the field will contain LED lights in place of the
Important
incandescent
lamp,
some
not contain
access
panels.
Contact
To avoid burns
andand
cuts,
wearwill
gloves
to protect
hands
should
bulb ComServ
atbreak.
1-866-426-2621
with
any
questions
or
concerns.
If hot, allow bulb to cool.
Important
To avoid burns and cuts, wear gloves to protect hands should bulb break. If
Tools
and Bulb
hot, allow
bulb to cool.
• Protective gloves
and bulb
• Tools
Standard
screwdriver or ¼-inch socket
- Protective gloves
- Standard screwdriver or 1/4-inch socket
1.1. Unplug
Unplugoven
oven.
2.2. Remove
Removescrew
screwfrom
fromside
sideofofoven
oven.
3.3. Remove
Removebulb
bulbby
byturning
turningcounter
counterclockwise,
beingcareful
carefulnot
nottotoburn
burnfingers
clockwise, being
fingers
or
break
bulb.
or break bulb.
4. Reconnect power to oven.
4. Reconnect power to oven.
21
Before Calling for Service
Record all inspections and repair for future reference.
!
WARNING
To avoid electrical shock which can cause severe personal injury or death, do not remove outer case at any time.
Only an authorized servicer should remove outer case.
Symptom
Check
I f oven does not operate:
• Check fuse or circuit breaker.
• Confirm oven is plugged into dedicated circuit.
If oven does not accept entries when pad is pressed:
• Confirm oven is on grounded and polarized circuit.
Contact electrician to confirm.
• Confirm light bulb is screwed in tightly.
• Confirm light bulb has not failed.
• Open and close oven door. Press pad again.
I f ove n ma lfunc tions :
• U nplug ove n, wa it for 1 minute , a nd plug in ove n.
I f ove n ope ra te s inte rmitte ntly :
• Check air intake and discharge area for obstrutions.
If oven light does not work:
Oven operates, but does not heat food:
Part No. 20072201
Printed in U.S.A. 12/2015
• Place one cup cool water in oven. Heat for one
minute. If water temperature does not rise, oven is
operating incorrectly and a service should be
called.
www.acpsolutions.com
22
 2015 ACP Inc.
Cedar Rapids, Iowa 52404
Download PDF