#790FILTER12 KIT
10" Dual Cartridge Water Filtration System
Food Service System Housing for Drop-In Cartridges
Applications
Features
•1
0" low profile slim line dual bowl housing
made from durable polypropylene for excellent
chemical resistance
•E
quipped with a pressure relief button to
relieve water pressure during cartridge changes
• Includes 9 3/4" granular activated carbon/
phosphate (item #790PSC10) and 9 7/8"
sediment (item #790SDC10) drop-in cartridges
• Includes wall mounting bracket
•S
hipped fully assembled
Technical Data
Dimensions
14 1/4"W x 5 3/4"D x 14 1/2"H
Inlet Connection
1/2"
Outlet Connection
1/2"
NPT Ports
Female
Opaque Housing
Polypropylene
Cap
Polypropylene
Maximum Temperature
125°F (51.7°C)
Maximum Pressure
75 PSI (5.17 bar)
Installation & Operation Tips
•C
hoose a mounting location suitable
to support the full weight of the system
when operating
• Install vertically so bowl hangs down
•M
ake sure O-ring is sufficiently lubricated
•A
lways screw on bowls by hand; never
tighten with a housing wrench
• Change cartridges on a 6 month
preventative maintenance program
• Clean bowl with mild solution of detergent
before inserting new cartridge
• Always flush the filter cartridge at time of
installation and cartridge change
- Designed specifically for countertop steamers, but also ideal for
small beverage equipment.
- For use where sediment is present and water is not pre-filtered
- Improves water's taste and filters out scale and odors.
PSC10
SDC10
PSC20
SDC20