PLEASEREAD
Thisusermanualisfromthemanufacturer—Jive
Communicationsmaynotsupportsomefeaturesdiscussed
inthisdocument.
Pleaseseeouronlinedocumentationorcontactusfora
completelistofsupportedfeatures.
ThanksforchoosingJive!
AudioCodes
HD VoIP
400HD Series of High Definition IP Phones
405HD IP Phone
User’s Manual
405HD IP Phone for Microsoft® Skype™ for Business
Version 3.0.1
User's Manual
Contents
Table of Contents
1
Introducing the 405HD IP Phone ................................................................................ 9
1.1
1.2
2
About AudioCodes' Series of High Definition IP Phones ...................................................9
Cutting Edge Voice Quality & HD VoIP .............................................................................9
Setting up the Phone................................................................................................. 11
2.1
2.2
Unpacking ........................................................................................................................11
Device Description ...........................................................................................................11
2.2.1
2.2.2
2.3
2.4
Cabling.............................................................................................................................14
Mounting the Phone.........................................................................................................15
2.4.1
2.4.2
3
Mounting the Phone on a Desktop .................................................................................... 15
Mounting on a Wall ............................................................................................................ 15
2.4.2.1 Routing the Handset Cable ................................................................................ 15
Getting Started........................................................................................................... 17
3.1
3.2
3.3
3.4
4
Front View .......................................................................................................................... 11
Rear View .......................................................................................................................... 13
Getting Acquainted with the Phone Screen .....................................................................17
Softkeys ...........................................................................................................................18
Navigating the Phone Menu ............................................................................................19
Displayed Messages........................................................................................................20
Signing In ................................................................................................................... 21
4.1
4.2
4.3
4.4
4.5
Signing in with PIN Code .................................................................................................21
Signing in with User Name and Password .......................................................................22
Signing in with the Cloud PBX Web Option .....................................................................22
Switching from Letters to Numbers/Symbols ...................................................................23
Signing Out ......................................................................................................................24
4.5.1
Signing out when the 'Sign out' Softkey is Removed from the Screen.............................. 25
5
Unlocking a Locked Phone ....................................................................................... 29
6
Customizing the Phone ............................................................................................. 31
6.1
6.2
6.3
6.4
Changing the Screen Language ......................................................................................31
Selecting Ring Tone ........................................................................................................32
Enabling Call Waiting.......................................................................................................33
Managing Simultaneous Incoming Calls ..........................................................................33
6.4.1
6.5
6.6
6.7
6.8
6.9
6.10
6.11
6.12
Configuring Busy on Busy ................................................................................................. 34
Defining Call Forwarding .................................................................................................35
Setting Date and Time .....................................................................................................36
Changing Screen's Contrast Level ..................................................................................38
Defining Screen's Backlight Timeout ...............................................................................39
Selecting an Answering Device .......................................................................................40
Defining Location .............................................................................................................40
Defining an Outbound Proxy ............................................................................................41
Adjusting Volume .............................................................................................................42
6.12.1 Adjusting Ring Volume ...................................................................................................... 42
6.12.2 Adjusting Tones Volume .................................................................................................... 42
Version 3.0.1
3
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
6.12.3 Adjusting Handset Volume ................................................................................................ 43
6.12.4 Adjusting Speaker Volume ................................................................................................ 43
6.12.5 Adjusting Headset Volume ................................................................................................ 43
6.13 Managing Phone Directories ...........................................................................................44
6.13.1
6.13.2
6.13.3
6.13.4
6.13.5
6.13.6
6.13.7
Accessing Directories ........................................................................................................ 44
Adding a Contact to the Personal Directory ...................................................................... 45
Editing Contact Information in the Personal Directory ....................................................... 46
Deleting a Contact from the Personal Directory ................................................................ 47
Adding a Person to Favorites after a Call with them is Logged ......................................... 48
Removing a Person from Favorites ................................................................................... 48
Searching for a Contact in a Directory ............................................................................... 49
6.14 Searching for a Contact in the Corporate Directory using T9 ..........................................50
6.14.1 Changing from T9 to A/a/1 ................................................................................................. 50
6.15 Defining a Speed Dial ......................................................................................................51
6.15.1
6.15.2
6.15.3
6.15.4
6.15.5
6.16
6.17
6.18
6.19
7
Defining Phone Keys as Paging Dials .............................................................................53
Changing your Presence Status ......................................................................................54
Viewing Microsoft Exchange Calendar in the Phone Screen ..........................................55
Receiving Meeting Reminders .........................................................................................56
Performing Basic Operations ................................................................................... 57
7.1
7.2
Using Audio Devices........................................................................................................57
Making Calls ....................................................................................................................57
7.2.1
7.2.2
7.2.3
7.3
7.4
7.5
7.6
7.7
7.8
8
Defining a Phone Key as a Speed Dial.............................................................................. 51
Configuring Pause Dialing for a Speed Dial to an Ext. behind an IVR .............................. 52
Using a VocaNOM Speed Dial .......................................................................................... 52
Editing a Speed Dial .......................................................................................................... 52
Deleting Speed Dials ......................................................................................................... 52
Dialing ................................................................................................................................ 58
Redialing ............................................................................................................................ 59
Dialing a Missed Call ......................................................................................................... 60
Answering Calls ...............................................................................................................60
Rejecting Incoming Calls .................................................................................................61
Silencing Incoming Calls ..................................................................................................61
Making a New Call Even Though a Call is Coming in .....................................................61
Ending an Established Call ..............................................................................................62
Viewing Missed, Received and Dialed Calls ....................................................................62
Performing Advanced Operations ........................................................................... 65
8.1
8.2
8.3
8.4
8.5
8.6
Answering Waiting Calls ..................................................................................................65
Placing a Call On Hold .....................................................................................................66
Handling Multiple Incoming Calls .....................................................................................66
Calling a Contact from 'Favorites' ....................................................................................67
Using a Speed Dial to Place a Call ..................................................................................67
Transferring Calls ............................................................................................................68
8.6.1
8.6.2
8.6.3
8.6.4
8.7
8.8
Performing a Blind Transfer ............................................................................................... 68
Performing a Consultative Transfer ................................................................................... 68
Performing a Semi-Consultative Transfer.......................................................................... 69
Merging Calls ..................................................................................................................... 70
Parking a Call ..................................................................................................................71
Configuring Group Call Pickup (GCP) .............................................................................71
User's Manual
4
Document #: LTRT-12044
User's Manual
Contents
8.9 Initiating a Multi-Party Skype for Business Remote Conference .....................................71
8.10 Muting Calls .....................................................................................................................74
8.11 Paging..............................................................................................................................75
8.11.1 Performing Outgoing Paging Calls .................................................................................... 75
8.11.2 Receiving Incoming Paging Calls ...................................................................................... 75
8.12 Setting up Better Together over Ethernet ........................................................................77
8.12.1
8.12.2
8.12.3
8.12.4
8.12.5
8.12.6
Installing the BToE PC Application .................................................................................... 77
Making Sure BToE is Correctly Installed ........................................................................... 85
Configuring the BToE TCP Port......................................................................................... 85
Enabling BToE for Online Users ........................................................................................ 86
Automatically Pairing the BToE PC/Laptop Application with the Phone ........................... 86
Manually Pairing the BToE PC/Laptop Application with the Phone .................................. 87
8.12.6.1 Manually Generating a Pair Code ...................................................................... 87
8.12.6.2 Manually Connecting the Phone with the BToE PC Application ........................ 88
8.12.6.3 Connecting the Skype for Windows Client with the Phone ................................ 91
8.12.7 Making Sure Phone/ Skype for Windows Client are Paired .............................................. 91
8.12.7.1 Making Sure Skype for Windows Client is Paired .............................................. 91
8.12.7.2 Making Sure the Phone is Paired ....................................................................... 92
8.13 Using BToE Functions .....................................................................................................93
8.13.1
8.13.2
8.13.3
8.13.4
8.13.5
Signing In ........................................................................................................................... 93
Making a Call (Click-to-Dial) .............................................................................................. 94
Establishing a Unified Communications Call Conference ................................................. 94
Answering a Call ................................................................................................................ 96
Transferring a Call ............................................................................................................. 97
8.14 Switching Primary Audio Device ......................................................................................98
8.15 Routing Voice from a Video Call to the Phone ................................................................99
8.16 Viewing and Playing Voicemail Messages ....................................................................100
8.16.1 Sending an Incoming Call Directly to Voicemail ..............................................................100
9
Troubleshooting ...................................................................................................... 101
9.1
Uploading Logs to Microsoft Server for Support Purposes ............................................101
Version 3.0.1
5
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
List of Figures
Figure 2-1: Front View ...................................................................................................................................... 12
Figure 2-2: Rear View ....................................................................................................................................... 13
Figure 2-3: Desktop Mounting .......................................................................................................................... 15
Figure 2-4: Wall Mounting ................................................................................................................................ 15
Figure 3-1: Phone Screen in Idle State ............................................................................................................ 17
Figure 3-2: Phone Menu ................................................................................................................................... 19
Figure 4-1: Entering Letters of the Alphabet .................................................................................................... 23
Figure 4-2: Entering a Symbol (e.g., a dot) ...................................................................................................... 24
Figure 4-3: Reverting to Letters (e.g., abc) ...................................................................................................... 24
Figure 4-4: Login............................................................................................................................................... 25
Figure 4-5: Web Interface – Home Page .......................................................................................................... 25
Figure 4-6: Sign-in – Content Blocked.............................................................................................................. 26
Figure 4-7: Sign-in – Windows Security Prompt ............................................................................................... 26
Figure 4-8: Windows Security Prompt .............................................................................................................. 27
Figure 4-9: Sign-out .......................................................................................................................................... 27
Figure 8-1: InstallShield Wizard – Preparing to Install ..................................................................................... 78
Figure 8-2: Welcome to the InstallShield Wizard ............................................................................................. 78
Figure 8-3: License Agreement ........................................................................................................................ 79
Figure 8-4: License Agreement ........................................................................................................................ 79
Figure 8-5: Destination Folder .......................................................................................................................... 80
Figure 8-6: Change Current Destination Folder ............................................................................................... 80
Figure 8-7: Ready to Install .............................................................................................................................. 81
Figure 8-8: Installing AudioCodes Better2Gether ............................................................................................. 81
Figure 8-9: InstallShield Wizard Completed ..................................................................................................... 82
Figure 8-10: AudioCodes Icon in Taskbar ........................................................................................................ 82
Figure 8-11: Control Panel>Programs>AudioCodes Better2Gether ................................................................ 83
Figure 8-12: Computer Management > Services and Applications .................................................................. 83
Figure 8-13: Device Manager > AudioCodes B2GoE USB Driver ................................................................... 84
Figure 8-14: Popup Menu ................................................................................................................................. 85
Figure 8-15: About AC BToE ............................................................................................................................ 85
Figure 8-16: TCP Port....................................................................................................................................... 85
Figure 8-17: AC BToE TCP Port ...................................................................................................................... 86
Figure 8-18: Popup Menu ................................................................................................................................. 88
Figure 8-19: Phone Pairing ............................................................................................................................... 88
Figure 8-20: AC BToE Failed Indication ........................................................................................................... 88
Figure 8-21: AC BToE is Connected Indication ................................................................................................ 88
Figure 8-22: Popup Menu: 'Disconnect' Enabled, 'Phone Pairing' Disabled .................................................... 89
Figure 8-23: BToE Disconnected ..................................................................................................................... 89
Figure 8-24: Popup Menu: BToE Disconnected ............................................................................................... 89
Figure 8-25: Start > Programs > AudioCodes > BToE Controller .................................................................... 90
Figure 8-26: Skype for Windows Sign-in Request Prompt ............................................................................... 91
Figure 8-27: Primary Device: Phone ................................................................................................................ 98
Figure 8-28: Primary Device: Speaker ............................................................................................................. 98
Figure 8-29: Primary Device: Headset ............................................................................................................. 98
List of Tables
Table 2-1: Font View Description ..................................................................................................................... 12
Table 2-2: Rear View Description ..................................................................................................................... 14
Table 2-3: Cabling ............................................................................................................................................ 14
Table 3-1: Phone Screen in Idle State.............................................................................................................. 17
Table 3-2: Softkeys ........................................................................................................................................... 18
Table 3-3: Messages Displayed in the Phone Screen Indicating Processes In Progress ............................... 20
Table 4-1: Symbol Options ............................................................................................................................... 23
Table 6-1: Time Zones...................................................................................................................................... 37
Table 6-2: Presence Statuses .......................................................................................................................... 54
Table 9-1: Troubleshooting .............................................................................................................................101
User's Manual
6
Document #: LTRT-12044
User's Manual
Notices
Notice
Information contained in this document is believed to be accurate and reliable at the time of printing.
However, due to ongoing product improvements and revisions, AudioCodes cannot guarantee
accuracy of printed material after the Date Published nor can it accept responsibility for errors or
omissions. Updates to this document and other documents can be viewed by registered customers at
http://www.audiocodes.com/downloads.
© Copyright 2017 AudioCodes Ltd. All rights reserved.
This document is subject to change without notice.
Date Published: Aug-14-2017
Trademarks
AudioCodes Ltd. All rights reserved. AudioCodes, AC, HD VoIP, HD VoIP Sounds Better,
IPmedia, Mediant, MediaPack, What’s Inside Matters, OSN, SmartTAP, VMAS, VoIPerfect,
VoIPerfectHD, Your Gateway To VoIP, 3GX, VocaNom, AudioCodes One Voice and CloudBond
are trademarks or registered trademarks of AudioCodes Limited All other products or trademarks
are property of their respective owners. Product specifications are subject to change without
notice.
WEEE EU Directive
Pursuant to the WEEE EU Directive, electronic and electrical waste must not be disposed of with
unsorted waste. Please contact your local recycling authority for disposal of this product.
Customer Support
Customer technical support and services are provided by AudioCodes or by an authorized
AudioCodes Service Partner. For more information on how to buy technical support for
AudioCodes products and for contact information, please visit our Web site at
www.audiocodes.com/support.
Abbreviations and Terminology
Each abbreviation, unless widely used, is spelled out in full when first used.
Documentation Feedback
AudioCodes continually strives to produce high quality documentation. If you have any comments
(suggestions or errors) regarding this document, please fill out the Documentation Feedback form
on our Web site at http://www.audiocodes.com/downloads. Your valuable feedback is highly
appreciated.
Version 3.0.1
7
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
Related Documentation
Document Name
400HD Series IP Phone for Microsoft Skype for Business Release Notes
400HD Series IP Phone for Microsoft Skype for Business Administrator’s Manual
420HD IP Phone for Microsoft Skype for Business Quick Guide
400HD Series IP Phones for Skype for Windows Hosting Partner (LHPv2) Environment Configuration Note
User's Manual
8
Document #: LTRT-12044
User's Manual
1
1. Introducing the 405HD IP Phone
Introducing the 405HD IP Phone
The 405HD SIP IP Phone is a low-cost, entry-level IP phone designed to offer the essential
everyday features that the modern business environment demands.
Features include:
Skype for Business compatibility
Graphical, backlit multi-lingual LCD (132 X 64)
GbE network interface
Four programmable soft keys
AudioCodes Auto-provisioning
Robust security mechanisms
Power over Ethernet (PoE)
Multiple language support
Integration with voice quality monitoring
Full duplex speakerphone and headset connectivity (analog headsets through RJ-9 port and
USB headsets through USB port)
Read this User’s Manual carefully to learn how to operate the product and take advantage of its
rich feature set.
1.1
About AudioCodes' Series of High Definition IP Phones
AudioCodes Series of High Definition IP Phones offers a new dimension of voice call quality and
clarity for the IP Telephony market. This new series of IP Phones further expands AudioCodes’
VoIP product offering for the service providers’ hosted services, Enterprise IP telephony and
Enterprise contact centers markets. As a natural addition to the AudioCodes Mobile Clients,
Media Gateway, Media Server & Multi-Service Business Gateway products, the AudioCodes
Series of High Definition IP Phones enable Systems Integrators and end-customers to build endto-end solutions that rely on AudioCodes’ technological advantage and proven track record in
providing state-of-the-art products. The AudioCodes Series of High Definition IP Phones meet a
growing demand for High Definition VoIP solutions in end-user phones and terminals, improving
the productivity and efficiency of business communications with new quality standards set by the
High Definition voice technology.
1.2
Cutting Edge Voice Quality & HD VoIP
Based on AudioCodes’ advanced, robust and field-proven VoIPerfectHD™ software,
AudioCodes’ IP Phones are designed to utilize the most popular wideband coders. The phones
feature enhanced proprietary capabilities such as packet loss concealment, high quality wideband
acoustic echo canceler, and low-delay adaptive jitter buffers to enrich the HDVoIP experience.
Version 3.0.1
9
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
This page is intentionally left blank.
User's Manual
10
Document #: LTRT-12044
User's Manual
2. Setting up the Phone
2
Setting up the Phone
2.1
Unpacking
When unpacking, ensure that the following items are present and undamaged:
405HD IP Phone / Stand
Handset / Cord
Cat 5e Ethernet Cable
AC Power Adapter (Optional)
If anything appears to be missing or broken, contact the distributor from whom you purchased the
phone for assistance.
2.2
Device Description
Use the graphics below to identify and familiarize yourself with the device's hardware functions.
2.2.1
Front View
The front view of the phone is shown in Figure 2-1 and described in Table 2-1.
Version 3.0.1
11
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
Figure 2-1: Front View
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Table 2-1: Font View Description
Item #
Label/Name
Description
1
Screen
LCD (Liquid Crystal Display) - interactive screen displaying calling
information, enabling you to set up phone features.
2
Ring LED
Flashing green light indicates an incoming call.
3
Softkeys
See Section 3.2 on page 18 for details on the four softkeys and the
available functions they offer.
4
MENU
Accesses menus (1) Call Log (2) Calendar (3) Speed Dial (4) Settings
(5) Device Status (6) Administration (7) Favorites (8) Log upload.
5
Navigation
Control / OK
Press the upper rim to scroll up menus/items in the screen. Press its
lower rim to scroll down. Press its left or right rim to move the cursor left
or right (when editing a contact number for example). Press the OK
button to select a menu/item/option.
6
USB port
[On the side of the phone] Allows USB headset connectivity
7
VOICE MAIL
Retrieves voice mail messages.
User's Manual
12
Document #: LTRT-12044
User's Manual
Item #
2. Setting up the Phone
Label/Name
Description
8
CONTACTS
Press to directly access the 'Favorites' directory. Other directories can be
accessed from the 'Favorites' directory.
9
10
11
12
13
REDIAL
HOLD
HEADSET
SPEAKER
MUTE
Accesses recently dialed numbers; one can be selected to redial.
Places an active call on hold.
Activates a call using an external headset.
Activates the speaker, allowing a hands-free conversation.
Mutes a call.
14
▲
VOL
VOL
▼
Increases or decreases the volume of the handset, headset, speaker, ring
tone and call progress tones.
15
2.2.2
Alphanumerical
Keypad
Keys for entering numbers, letters and symbols (e.g., colons).
Rear View
The rear view of the phone is shown in the figure below and described in the table below.
Figure 2-2: Rear View
Version 3.0.1
13
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
Table 2-2: Rear View Description
Label
Description
DC
12V DC power jack that connects to the AC power adapter.
PC
RJ-45 port for connecting the phone to a PC (10/100/1000 Mbps downlink).
RJ-45 port to connect to the Ethernet LAN cable for the LAN connection (uplink 10/100/1000 Mbps). If you're using Power over Ethernet (PoE), power to the
phone is supplied from the Ethernet cable (draws power from either a spare line or
signal line).
Internet
Headset jack, i.e., RJ-9 port that connects to an external headset.
Handset jack, i.e., RJ-9 port, to connect the handset.
2.3
Cabling
This section shows how to cable your phone.
Table 2-3: Cabling
Step
1
Description
Connect the handset cord's shorter straight end to the handset. Connect the longer, straight
end to the
jack on the phone.
2
Connect the RJ-45 Internet port to your LAN network (LAN port or LAN switch/router), using a
CAT 5 / 5e Ethernet cable.
3
Connect the RJ-45 PC port to a computer, using a CAT 5 / 5e straight-through Ethernet cable.
4
Connect the connector tip of the power adapter to the phone’s power socket (labelled DC
12V). Connect the two-prong adapter directly to the electrical wall outlet.
5
Connect the RJ-9 headset
jack to a headset (optional)
Note: If the LAN to which the phone is connected supports Power over Ethernet (PoE), no
AC adapter is required; the phone receives power from the Ethernet network.
Prior to connecting power, refer to the Compliancy and Regulatory Information at
www.audiocodes.com/library.
User's Manual
14
Document #: LTRT-12044
User's Manual
2.4
2. Setting up the Phone
Mounting the Phone
The phone can be mounted on a:
Desk (see Section 2.4.1 below)
Wall (see Section 2.4.2 below)
See also https://www.youtube.com/watch?v=oGe9STB9lFE to assemble the base stand.
2.4.1
Mounting the Phone on a Desktop
This section shows how to place the phone on a desk or flat surface.
To mount the phone on a desk or flat surface:
Slide the short edges of the L-shaped stand (the prongs) into the phone's two rear slots (see
A below). Slide the prongs in until they lock.
Figure 2-3: Desktop Mounting
A
A
B
2.4.2
B
Mounting on a Wall
To mount the phone on a wall:
1.
Hook the phone's two rear notches (see B below) onto wall mounting screws.
2.
Pull out the handset's cradle clip, which is by default in desktop mounting position, invert it,
and then push it back in.
Figure 2-4: Wall Mounting
B
B
This is the wall mounting position.
2.4.2.1
Routing the Handset Cable
The phone features a groove for routing the handset cable.
Version 3.0.1
15
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
This page is intentionally left blank.
User's Manual
16
Document #: LTRT-12044
User's Manual
3
3. Getting Started
Getting Started
This section gets you started with the phone. The phone features a screen, providing an intuitive,
menu-driven user interface for configuring the device and viewing call information.
Before using the screen, you must sign in (see Section 4 on page 21).
3.1
Getting Acquainted with the Phone Screen
This section gets you acquainted with the phone screen.
The figure below shows the screen in idle state.
Figure 3-1: Phone Screen in Idle State
1
2
4
3
Reference:
Table 3-1: Phone Screen in Idle State
Reference
Description
1
Displayed name configured by your system administrator; see the Administrator's Manual.
Adjacent to the name is the Presence status (Available, Busy, Do not disturb, Away, or Be
right back). See Section 6.17 on page 54 for details.
2
Extension Line configured by your system administrator. See the Administrator's Manual
for details.
3
Softkeys; to activate, press the key on the device, below the screen, corresponding to the
softkey. See Table 3-2 for softkey descriptions.
4
Day, Date and Time, automatically retrieved from the Network Time Protocol (NTP) server,
enabled by your system administrator.
Version 3.0.1
17
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
3.2
Softkeys
The table below shows the softkeys displayed in the phone screen. To use a softkey, press the
hard key located directly below it on the device.
Table 3-2: Softkeys
Softkey
Description
Missed
Displays missed calls.
Forward
Automatically forwards calls.
Status
Displayed in idle state. Lets you set presence status: Available, Busy, Do not disturb, Away,
Be right back
Sign in
/Sign out
Sign in is displayed if you haven't signed in yet (in the idle screen).
Sign out is displayed if you press the Status softkey after signing in.
Displayed after lifting the handset. Opens the 'Favorites' defined in the Skype for Business
client.
Displayed after lifting the handset (for example). Displays the Call Log.
Select
Identical to the hard OK key on the phone. Either can be used. Selects a menu or option.
BToE
Displayed after pressing the MENU hard key. Generates a code for manually pairing the
phone with Skype for Business client, for unified communications.
A/a/1
Enables switching between input modes: abc, ABC, Abc, 123, or T9.
Save
Saves settings.
Cancel
Cancels the currently initiated call or configuration.
Dial
Displayed after a number is keyed, a directory contact is selected, or a logged call is selected.
Clear
Displayed after entering a digit of a phone number (for example). Deletes from right to left.
Displayed after a number is dialed and answered on the other side, and after you answer a
call. Displays the Call Menu.
Conf
Displayed (1) after a number is dialed and the call is answered on the other side and (2) after
you answer a call. Pressing it displays the ADD PARTICIPANT screen.
BXfer
Displayed (1) after a number is dialed and the call is answered on the other side and (2) after
a call is answered. Lets you transfer the call in a blind transfer.
URL
Displayed after lifting the handset (for example). Enables calling a URL.
Detail
Displayed after selecting a call log (for example). If selected, the details of a logged call are
displayed (Time, Date, etc.).
+Fav
Displayed in the Call Details screen. Allows adding the person to the Favorites screen.
End
Displayed after pressing the Dial softkey (for example). Ends the call.
Back
Displayed after pressing the MENU key (for example). Returns to the previous screen.
Start
Displayed after pressing Forward > Forward to a number (for example).
Edit
Displayed after you select a contact to be edited (for example).
Delete
Displayed after pressing the MENU key on the phone and then selecting Call Log (for
example).
Silent
Displayed when the phone rings, alerting to an incoming call. Lets you silence the ring.
Reject
Displayed when the phone rings, alerting to an incoming call. Lets you reject the call.
Accept
Displayed when the phone rings, alerting to an incoming call. Lets you accept the call.
User's Manual
18
Document #: LTRT-12044
User's Manual
3.3
3. Getting Started
Navigating the Phone Menu
The MENU key on the phone lets you access information and configure settings shown in the
figure below. Press it to view call logs, view meetings scheduled in the calendar for that day
(integrated with Skype for Business client), configure speed dials, customize phone settings,
determine device status, perform administration, access 'Favorites' and other phone directories,
and perform log upload to Microsoft server.
Figure 3-2: Phone Menu
Note: Administration is intended for system administrators only. It is password protected.
See the Administrator’s Manual for details.
Version 3.0.1
19
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
To access the phone's menu:
Press the MENU key located on the device.
To navigate to menu items:
After opening the menu, press the navigation control's lower rim -OR- press the menu item's
number, e.g., press 3 to navigate to Speed Dial.
To select a menu or menu item:
Press the Select softkey or press the navigation control's OK button.
To cancel and move to a previous menu level:
Press the Back softkey.
3.4
Displayed Messages
Messages displayed in the phone screen, indicating processes in progress, include:
Table 3-3: Messages Displayed in the Phone Screen Indicating Processes In Progress
Message
Description
Initializing
Initializing
Discovering LLDP
Discovering VLAN using Link Layer Discovery Protocol (LLDP)
Discovering CDP
Discovering VLAN using Cisco Discovery Protocol (CDP) )
Acquiring IP
Acquiring an IP address from a DHCP server
Initializing Network
Initializing the network
Signing in
Signing in to the Skype for Windows server
Signing in...Contacting time server
Get the time from the NTP server
Discovering Lync server
Auto discovering the Skype for Windows server on the network
Registering
Registering to a SIP proxy server (after booting up the phone)
Downloading Firmware File
Downloading a firmware file
Upgrading Firmware
Upgrading the phone’s firmware
Signing out
Signing out of the Skype for Windows server
User's Manual
20
Document #: LTRT-12044
User's Manual
4
4. Signing In
Signing In
This section shows you how to sign in to the phone.
To sign in to the phone:
In the idle screen, press the Sign in softkey; the sign-in options are displayed:
PIN code - see Section 4.1
User name and Password - see Section 4.2
Web Sign-in - see Section 4.3
Note:
• After signing out, the next time you sign in the phone will present the option that was used
to sign in before signing out.
• If a user signs out and another signs in, the phone presents empty Speed Dials and empty
Call Logs to the newly signed-in user. The Speed Dials and Call Logs of the signed-out
user are not saved on the phone.
4.1
Signing in with PIN Code
This section shows how to sign in with the PIN code and phone number. The PIN code is
provided by your network administrator.
To sign in with the PIN code:
1.
In the 'Sign-in options' screen shown above, select the PIN Code option.
2.
Enter your phone number.
3.
Navigate down and enter your PIN code (obtainable from the network administrator).
To switch from numbers to alphabetical letters and symbols, see Section 4.4.
4.
Navigate down with the lower rim of the navigation control button, and then enter your PIN
code. You can get it from your administrator. To switch from numbers to alphabetical letters
and symbols, see the next section.
5.
Press the Sign-in softkey; the phone is signed in and the idle screen is displayed.
Version 3.0.1
21
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
4.2
Signing in with User Name and Password
This section shows how to sign in with User Name and Password.
To sign in with User Name and Password:
1.
In the 'Sign-in options' screen, select User name and Password.
Note: Signing in with a username that is a NetBIOS Domain Name, i.e., domain\username,
or with the PIN Code, are disallowed for Skype for Business online sign-in. They are only
allowed for on-premises sign-in. Online sign-in must be in the following format:
• Sign-in address, i.e., SIP URI. To switch from letters of the alphabet to symbols such as
@, - and period, see Section 4.4.
• User name, in UPN (User Principal Name) format, i.e., the way the user's name appears in
their e-mail address listed in the Active Directory: username@domain.com
• User’s network IT password (the same password you use to access your PC)
2.
4.3
Press the Sign in softkey; after signing in successfully, the New Device Lock Code screen
opens (see under Section 5 for more information).
Signing in with the Cloud PBX Web Option
This section shows how to sign in with the Cloud PBX Web option, a.k.a. Device Pairing. Signing
in with this option enables connectivity to Microsoft's Cloud PBX, Microsoft's cloud-hosted version
of enterprise voice.
Note: Applies only to Microsoft Cloud PBX users using the 405HD phone.
The option exempts users from having to laboriously key in their user name and password
using the phone keypad. If the option is selected, a URL and a Pairing Code are displayed:
Users must then point their browser to the URL and enter the Pairing Code in the Microsoft web
page. Sign-in to Microsoft's Cloud PBX is then performed.
User's Manual
22
Document #: LTRT-12044
User's Manual
4.4
4. Signing In
Switching from Letters to Numbers/Symbols
You can use the keypad to enter letters of the alphabet, numbers or symbols, and to switch from
one to the other.
To enter letters of the alphabet/numbers:
1.
Press the A/a/1 softkey repeatedly or the # key on the keypad repeatedly to navigate to:
•
abc = lower case letters -OR-
•
ABC = upper-case letters -OR-
•
Abc = first-letter upper case, the rest lower case -OR-
•
123 = numbers
Figure 4-1: Entering Letters of the Alphabet
2.
Select abc; the selection is displayed (see the figure above). Press the MNO key (for
example) on the keypad; m is entered. Press the GHI key three successive times (pressing it
once produces g, twice produces h); i is entered (see the figure above). Enter k and e.
To enter a symbol (e.g., dot or @ or hyphen):
1.
If you're not in lower case alphabetical mode, press the A/a/1 softkey and navigate to abc
(mandatory). You can also access the mode menu by pressing the # key on the keypad –
press the # key successively to navigate in the menu.
2.
Press the 1 key on the keypad; a dot is entered. Immediately press the 1 key again; a
backslash is entered. Pressing successively produces the symbol options shown in the table.
Table 4-1: Symbol Options
Symbol
Explanation
Symbol
Explanation
.
Dot
*
Star sign
\
Backslash
=
Equal sign
At
|
Separator
;
Semi-colon
(
Open parenthesis
:
Colon
)
Close parenthesis
#
Pound
{
Open parenthesis
$
Dollar
}
Close parenthesis
%
Percentage
[
Open square parenthesis
^
Caret
]
Close square parenthesis
&
Ampersand
"
Double quotation marks
!
Exclamation mark
'
Single quotation mark
?
Question mark
>
Greater than
+
Plus
<
Less than
-
Hyphen
,
Comma
_
Underscore
/
Forward slash
~
Approximates
@
Version 3.0.1
23
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
Figure 4-2: Entering a Symbol (e.g., a dot)
To revert to letters (e.g., abc):
Press the A/a/1 softkey (or the # key on the keypad) and navigate to abc mode.
Figure 4-3: Reverting to Letters (e.g., abc)
4.5
Signing Out
This section shows you how to sign out.
To sign out:
1.
In the idle screen, press the Status softkey.
2.
In the Status screen press the Sign out softkey.
You're now signed out. You're returned to the idle screen displaying the Sign in softkey.
Note: If a user signs out and another signs in, the phone presents empty Speed Dials and
empty Call Logs to the newly signed in user. The Speed Dials and Call Logs of the signed out
user are not saved on the phone.
User's Manual
24
Document #: LTRT-12044
User's Manual
4.5.1
4. Signing In
Signing out when the 'Sign out' Softkey is Removed from the Screen
Located in lobbies, cafeterias, employee lounges, meeting rooms, and other gathering places,
Common Area phones typically do not display a Sign out softkey in the screen, in line with IT
management's decision to remove the capability from users. Users can sign out, if necessary,
using the Web interface.
To sign out using the Web interface:
3.
Obtain the Common Area phone's IP address (MENU key > Status > Network Status > IP
Address) and point your Web browser to it; the phone's Web interface login page opens.
Figure 4-4: Login
4.
Enter the login credentials (default user name is admin and default password is 1234); the
Home page of the Web interface is displayed.
Figure 4-5: Web Interface – Home Page
5.
Version 3.0.1
In the Web interface, open the Sign-In page (Configuration tab > SfB sign in > Sign in).
25
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
Figure 4-6: Sign-in – Content Blocked
6.
Click the open it link and then click Show content.
Figure 4-7: Sign-in – Windows Security Prompt
7.
User's Manual
Click the Continue to this website (not recommended) link.
26
Document #: LTRT-12044
User's Manual
4. Signing In
Figure 4-8: Windows Security Prompt
8.
In the Windows Security prompt, enter the username and password and then click OK.
Figure 4-9: Sign-out
9.
Version 3.0.1
Click the Sign out button.
27
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
This page is intentionally left blank.
User's Manual
28
Document #: LTRT-12044
User's Manual
5
5. Unlocking a Locked Phone
Unlocking a Locked Phone
Note: For the automatic locking feature to be available to users, the administrator must first
enable it in the Skype for Business server and Web interface. See the Administrator's Manual
for details.
The phone supports the capability to automatically lock after a configured period of time. The
feature secures phones against unwanted (mis)use. If left untouched for 10 minutes (default), the
phone automatically locks and is inaccessible to anyone who doesn't know its lock number.
After a phone locks:
Incoming calls are allowed, but outgoing calls need the lock number.
Without the lock number, users cannot access the Call Log, Calendar and Corporate
Directory, but they can call preconfigured emergency numbers.
When signing in for the first time, the user is prompted for a device lock PIN (personal
identification number). After entering a number, e.g., 123456, confirming it, and saving it, the
phone goes into idle state, and after 10 minutes it is automatically locked.
To manually change the lock code:
1.
Press the MENU key, select Settings and then scroll down to select Device Security.
2.
In the Device Security screen that opens, select Change Lock PIN, enter the old number,
click OK, then when prompted for the new number, enter it and confirm.
To locally unlock a phone:
1.
In the idle screen, press the Unlock softkey.
2.
In the Enter Lock Code screen, enter the number and press the OK softkey; the phone
unlocks.
To manually lock a phone at any time you choose:
[When the phone is in idle mode] Press the Status softkey and then press the Lock softkey
that is displayed; the phone locks and an Unlock softkey is displayed in the idle screen.
Version 3.0.1
29
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
This page is intentionally left blank.
User's Manual
30
Document #: LTRT-12044
User's Manual
6
6. Customizing the Phone
Customizing the Phone
This section shows you how to customize your phone for enhanced usability.
6.1
Changing the Screen Language
The screen supports multiple languages. English is the default but you can change it to another.
To change the default:
1.
Access the Languages screen (MENU key > Settings > Language).
2.
Navigate to the language you want.
3.
Press the Select softkey to select it.
4.
Press the Save softkey to save the setting.
Version 3.0.1
31
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
6.2
Selecting Ring Tone
You can choose from a selection of ring tones to indicate incoming calls.
To select a ring tone:
1.
Access the Ring Tone screen (MENU key > Settings > Ring Tone).
2.
Navigate to and select a ring tone. A sample of each is played as you navigate through the
ring tones.
3.
Set ring tone volume by pressing the
- + hard key:
A few seconds after adjusting the volume level the Ringer Volume indication is hidden.
4.
Press the Select softkey to apply your settings.
5.
Press the Save softkey to save your settings.
User's Manual
32
Document #: LTRT-12044
User's Manual
6.3
6. Customizing the Phone
Enabling Call Waiting
You can enable or disable call waiting.
To enable or disable call waiting:
6.4
1.
Access the Call Waiting screen (MENU key > Settings > Call Waiting).
2.
Navigate to and select:
•
Disable (disables call waiting)
-OR-
•
Enable (enables call waiting)
-OR-
•
Busy on busy (see Section 6.4.1 below)
3.
Press the Select softkey to apply your settings.
4.
Press the Save softkey to save your settings.
Managing Simultaneous Incoming Calls
If two calls from James and Jordan simultaneously come in on your phone or if you're in a call
with one and the other calls, the phone's screen displays them in a graphically friendly way.
Simultaneous incoming calls from James and Jordan; both flash:
When you answer James:
If you're talking to Jordan when James calls, James flashes:
Additional visual indication:
The blue Ring LED flashes in the right corner of the phone
Version 3.0.1
33
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
6.4.1
Configuring Busy on Busy
This feature rejects an coming call if you're already in an active call on either the phone or Skype
for Windows client. It plays a busy signal to the caller.
To configure Busy on Busy:
1.
Access the Call Waiting screen (MENU key > Settings > Call Waiting).
2.
Select the Busy on Busy option.
User's Manual
34
Document #: LTRT-12044
User's Manual
6.5
6. Customizing the Phone
Defining Call Forwarding
You can enable an incoming call to be automatically redirected to another phone number if a
user-defined condition is met, e.g., if the line is busy.
To define call forwarding:
1.
Access the Automatic Forward screen (MENU key > Settings > Forward settings -orpress the Forward softkey when the screen is in idle state).
2.
To forward to voice mail: In the Automatic Forward screen, navigate to Forward to Voice
Mail and press the Select softkey; you're returned to the idle screen; calls will be
automatically forwarded to your Voice Mail.
3.
To forward to a number: In the Automatic Forward screen, navigate to Forward to a
Number and press the Select softkey:
4.
Enter the number and press the Start softkey; you're returned to the idle screen; calls will be
automatically forwarded to the number.
To deactivate call forwarding:
When the screen is in idle state press the Forward softkey and in the Automatic Forward
screen, select Do not forward calls.
Version 3.0.1
35
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
6.6
Setting Date and Time
Date and time is automatically retrieved from the deployed Network Time Protocol (NTP) server,
enabled by your administrator.
To enable the NTP server:
1.
Access the Date and Time screen (MENU key > Settings > Date and Time).
2.
If not already 'Enabled', notify your network administrator.
To configure the Time Zone:
1.
Navigate to the Time zone option and press the Select softkey.
2.
Navigate to and select the time zone relevant to your geographical location. See Table 6-1
below for a list of all Time Zone options.
To configure the time format:
1.
Navigate to the Time format option and press the Select softkey.
2.
Navigate to the format of your choice and press the Select softkey.
Note: To configure the NTP server, see the Administrator’s Manual.
To configure the date format:
1.
Navigate to the Date format option and press the Select softkey.
2.
Navigate to the date format of your choice and press the Select softkey.
User's Manual
36
Document #: LTRT-12044
User's Manual
6. Customizing the Phone
Table 6-1: Time Zones
Time Zone
Place
(GMT-12:00)
Eniwetok, Kwajalein
(GMT-11:00)
Midway Is, Samoa
(GMT-10:00)
Hawaii, Alaska
(GMT-08:00)
Pacific Time (US & Canada
(GMT-07:00)
Chihuahua, Mazatlan, Mountain Time (US & Canada
(GMT-06:00)
Central Time (US & Canada
(GMT-05:00)
Eastern Time (US & Canada
(GMT-04:00)
Atlantic Time (Canada
(GMT-03:30)
Newfoundland, Buenos Aires, Georgetown, Brasilia, Greenland
(GMT-03:00)
Buenos Aires, Georgetown, Brasilia, Greenland
(GMT-02:00)
Mid-Atlantic
(GMT-01:00)
Azores, Cape Verde Is
(GMT 00:00)
Greenwich Mean Time: Dublin, Edinburgh, Lisbon, London, Casablanca, Monrovia
(GMT+01:00)
Amsterdam, West Central Africa, Madrid, Paris, Vilnius, Berlin, Bern, Rome, Vienna, Prague
(GMT+02:00)
Cairo, Jerusalem, Bucharest, Helsinki, Riga, Tallinn, Athens, Istanbul, Minsk, Harare, Pretoria
(GMT+03:00)
Kuwait, Riyadh, Nairobi, Baghdad, Moscow, St. Petersburg, Volgograd
(GMT+03:30)
Tehran
(GMT+04:00)
Abu Dhabi, Muscat, Baku, Tbilisi, Kabul
(GMT+05:00)
Islamabad, Karachi, Tashkent, Yekaterinburg
(GMT+05:30)
Bombay, Calcutta, Madras, New Delhi
(GMT+05:45)
Kathmandu
(GMT+06:00)
Almaty, Dhaka, Colombo, Almaty, Novosibirsk
(GMT+06:30)
Rangoon
(GMT+07:00)
Bangkok, Hanoi, Jakarta, Krasnoyarsk
(GMT+08:00)
Beijing, Chongqing, Hong Kong, Urumqi, Perth, Singapore, Taipei, Irkutsk, Ulaan Bataar
(GMT+09:00)
Osaka, Sapporo, Tokyo, Seoul, Yakutsk
(GMT+09:30)
Darwin, Adelaide
(GMT+10:00)
Canberra, Melbourne, Sydney, Brisbane, Guam, Port Moresby, Hobart, Vladivostok
(GMT+11:00)
Magadan, Solomon Is, New Caledonia
(GMT+12:00)
Fiji, Kamchatka, Marshall Is, Auckland, Wellington
(GMT+13:00)
Nuku'alofa
Version 3.0.1
37
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
6.7
Changing Screen's Contrast Level
You can change the screen's contrast level. The screen supports 64 different contrast levels. The
range is 0-63. The default is 18. You can choose the level that suits you best.
To define the screen's contrast level:
1.
Access the LCD Contrast menu (MENU key > Settings > LCD Contrast).
2.
Navigate to the contrast level that suits you best. To navigate, press the navigation control's
left or right rim.
3.
Press the Save softkey to apply your settings.
User's Manual
38
Document #: LTRT-12044
User's Manual
6.8
6. Customizing the Phone
Defining Screen's Backlight Timeout
You can define for how long the phone’s backlight will stay on when the phone is idle. When this
duration times out, the backlight switches off. For the backlight to never time out, select Always
on.
To define screen backlight timeout:
1.
Access the Backlight Timeout screen (MENU key > Settings > Backlight Timeout).
2.
Navigate to and select Always on or 10 / 20 / 30 / 40 / 50 / 60 seconds).
3.
Press the Select softkey to apply your settings.
4.
Press the Save softkey to save your settings.
Version 3.0.1
39
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
6.9
Selecting an Answering Device
You can select which audio device (speaker or headset) is activated when you answer calls (by
pressing the Accept softkey or lifting the handset), or when you dial calls (by pressing number
keys on the keypad and then pressing the Dial softkey).
The default device is the speaker.
To select the answering device:
6.10
1.
Access the Answer Device screen (MENU key > Settings > Answer Device).
2.
Navigate to and select Speaker or Headset.
3.
Press the Save softkey.
Defining Location
This feature allows the called party to identify the geographical location of a calling party. For
example, if a caller in the U.S. makes an emergency call to E911, the feature extracts the caller's
information for the police department to immediately identify the caller's location.
The network administrator configures geographical location for each subnet (see the
Administrator's Manual). After you sign in, your geographical location is downloaded via inband
provisioning. If geographical location is not provisioned by the server, a popup opens in the
phone's screen enabling users to either Set the location manually, Skip (the popup closes but
pops up every few hours), or Dismiss ('kills' the popup).
To manually set location:
Access the Location screen (MENU key > Settings > Location).
User's Manual
40
Document #: LTRT-12044
User's Manual
6.11
6. Customizing the Phone
Defining an Outbound Proxy
Skype for Windows Server Multitenant Hosting Pack is a Microsoft® Unified Communications
(UC) hosting solution for telecommunications and hosting providers. The solution enables
Microsoft hosting partners to deploy a single instance of the Skype for Windows Server software
to securely and economically host multiple tenants with a rich, fully integrated UC solution.
To connect the AudioCodes' Skype for Windows-compatible phone to a hosted Lync environment
(LHP), a dedicated 'Outbound Proxy' parameter is available which is used to configure the hosted
service provider's domain name (FQDN).
Note:
• In hosted environments, it's common practice that this hosted domain name is different to
the enterprise's domain name.
• Refer also to the 400HD Series IP Phones for Lync Hosting Partner (LHPv2) Environment
Configuration Note.
To configure a phone for an LHP environment, configure the address of the Outbound Proxy as
the hosted service provider's domain name (FQDN).
To configure the address of the Outbound Proxy:
1.
In the phone's screen, access the Outbound Proxy screen (MENU key > Settings >
Outbound Proxy):
2.
Press the right rim of the navigation control to set the 'Use Hosted Proxy' field to Enabled:
3.
Press the lower rim of the navigation control to navigate down to the 'Proxy Address' field:
4.
In the 'Proxy Address' field enter the hosted service provider's domain name (FQDN) and
then navigate down to the 'Port' field:
5.
Configure the Port (default = 0).
6.
Press the Save softkey.
Version 3.0.1
41
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
6.12
Adjusting Volume
You can adjust the volume of the
Ring
Tones (e.g., dial tone)
Handset
Speaker
Headset
6.12.1 Adjusting Ring Volume
You can adjust the volume of the ring indicating an incoming call.
To adjust ring volume:
1.
When the phone is in idle state (i.e., not in use), press the
Volume bar is displayed on the screen:
- + hard key; the Ringer
2.
Press the - + hard key on the keypad to adjust the volume. After adjusting, the Ringer
Volume level disappears from the screen.
6.12.2 Adjusting Tones Volume
You can adjust the phone's tones, including dial tone, ring-back tone and all other call progress
tones.
To adjust tones volume:
1.
Off-hook the phone (using handset, speaker or headset).
2.
Press the the
3.
Press the - + hard key to adjust the volume. After adjusting, the Tones Volume bar
disappears from the screen.
User's Manual
- + hard key; the Tones Volume bar is displayed:
42
Document #: LTRT-12044
User's Manual
6. Customizing the Phone
6.12.3 Adjusting Handset Volume
You can adjust the volume of the handset during a call or when making a call. After changing the
volume, the newly adjusted level applies to all subsequent handset use.
To adjust handset volume:
1.
During a call or when making a call ensure that the handset is off the cradle.
2.
Press the
3.
Press the
- + hard key on the keypad. After adjusting, the Handset Volume bar
disappears from the screen.
- + hard key; the Handset Volume bar is displayed on the screen.
6.12.4 Adjusting Speaker Volume
You can adjust the volume of the speaker only during a call. After changing the volume, it applies
to all subsequent speaker use.
To adjust the speaker volume:
1.
During a call, press the speaker key.
2.
Press the
3.
Adjust the volume using the - + hard key. After you finish adjusting the volume, the
Speaker Volume bar disappears from the screen.
- + hard key; the Speaker Volume bar is displayed on the screen.
6.12.5 Adjusting Headset Volume
You can adjust the volume of the headset only during a call. After changing the volume, it applies
to all subsequent headset use.
To adjust the headset volume:
1.
During a call, press the headset key.
2.
Press the
3.
Adjust the volume using the - + hard key. After adjusting the volume, the Headset
Volume bar disappears from the screen.
Version 3.0.1
- + hard key; the Headset Volume bar is displayed in the screen.
43
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
6.13
Managing Phone Directories
The phone supports a number of directories:
Favorites (integrated with Skype for Business client)
Corporate directory
Personal directory
Outlook Contacts
Others
Note:
• You can add, edit and delete contacts in the Personal directory. You cannot in the
Corporate directory. Your network administrator sets it up in the Microsoft Skype for
Business server (see the Administrator’s Manual).
• You can add a maximum of 1,000 contacts to your Personal directory. After adding a
contact, you can call the contact directly from the directory. If you receive an incoming call
from a contact listed in the directory, the screen displays the name listed.
• You can add, edit or delete contacts in the Skype for Business client's Favorites. See the
Skype for Business client documentation.
• The Personal directory and Corporate directory display the presence status of contacts if
your network administrator set them up in the Microsoft Skype for Business server (see
the Administrator’s Manual).
• If you assign a speed dial key to the contact, you can press it to call them.
6.13.1 Accessing Directories
All the directories are accessed from the CONTACTS hard key on the phone.
To access the Skype for Business client Favorites directory:
Press the CONTACTS key.
To access other directories:
In the Favorites screen shown above, press the
choice.
User's Manual
44
softkey and select the directory of your
Document #: LTRT-12044
User's Manual
6. Customizing the Phone
6.13.2 Adding a Contact to the Personal Directory
This section shows how to add a contact to the Personal directory. You can enter the contact's
home number, office number, mobile number, and/or SIP URI. You can also define a Speed Dial
to place calls quickly to the contact (see Section 6.15 on page 51). After adding a contact you
search and find them in the group, dial them, edit their contact information or delete them.
Note: You can add a maximum of 1,000 contacts to your Personal directory. After adding a
contact, you can call the contact directly from the directory. If you receive an incoming call
from a contact listed in the directory, the screen displays the name listed.
To add a contact to the Personal directory:
1.
Access the Personal directory.
2.
Select New contact (press the Select softkey):
3.
In the 'Modify contact' screen, key in the ‘Name’ of the new contact.
4.
Navigate down and key in the new contact's office phone number.
5.
Optionally, navigate down and key in the new contact's home and mobile numbers as well.
6.
Optionally, navigate down and enter the contact's SIP URI, e.g., mike.dubb@audiocodes.com.
You may find this option useful if you don't know their phone number.
7.
Press the Sp. Dial softkey to assign a speed dial key if required:
8.
Navigate to the first Empty speed dial and press the Select softkey, a speed dial key is
assigned to the contact.
9.
Press the Save softkey; 'Contact Saved' is displayed.
10. To view the assigned speed dial, navigate down to the contact's name and press 'Detail'.
Version 3.0.1
45
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
6.13.3 Editing Contact Information in the Personal Directory
This section shows how to edit contact information in the Personal directory.
To edit contact information in the Personal directory:
1.
Access the Personal directory and navigate to the name of the contact to edit:
2.
Press the Detail softkey:
3.
Press the Edit softkey:
4.
Modify the contact’s details and press the Save softkey.
Note: Corporate directory contacts cannot be modified.
User's Manual
46
Document #: LTRT-12044
User's Manual
6. Customizing the Phone
6.13.4 Deleting a Contact from the Personal Directory
This section shows how to delete a contact from the Personal directory.
To delete a contact from the Personal directory:
1.
Access the Personal directory and navigate to the contact to delete:
2.
Press the Detail softkey; the contact details are shown.
3.
Press the Delete softkey; a 'Delete current contact?' warning message appears:
4.
Press the Yes softkey to remove the contact from the phone directory or No if you want to
keep the contact in the directory; the contact is removed from the directory.
Note: Corporate directory contacts cannot be deleted.
Version 3.0.1
47
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
6.13.5 Adding a Person to Favorites after a Call with them is Logged
This section shows how to add a person to the Favorites directory after a call with them is logged.
Note: A maximum of 1,000 people can be added to the Favorites directory.
To add a person to your Favorites directory:
1.
Open the Call Log (MENU key > Call Log).
2.
Select the call log:
3.
In the log, select the person with whom the call was made and then press the Detail softkey.
4.
In the 'Call Details' screen, press the +Fav softkey; the person is added to your Favorites
directory.
Note: You can also add a person to the Favorites directory from the Corporate Directory,
Outlook Contacts, Personal Directory and (User) Groups, through the 'Contact details'
screen's +Fav softkey, shown below.
6.13.6 Removing a Person from Favorites
You can remove a person from the Favorites directory.
To remove a person from your Favorites directory:
1.
Open the Favorites directory (MENU key > Favorites).
2.
Navigate to the person to remove and press the OK navigation control; the Contact Details
screen opens.
3.
Press the -Fav softkey; the person is removed from the Favorites directory.
User's Manual
48
Document #: LTRT-12044
User's Manual
6. Customizing the Phone
6.13.7 Searching for a Contact in a Directory
You can quickly and easily locate a contact in the directory. This is especially useful if you have a
long list of contacts.
Note: When searching in the Corporate directory, the T9 feature is available. See the next
section for details.
To search for a contact:
1.
Access the phone directory.
2.
Search for a contact:
Version 3.0.1
•
Navigate to the contact in the list
-OR-
•
Key the first letter in the contact's name using the keypad. As you press the key, the
directory locates contacts whose names begin with that letter. For example, to search
for the contact Jonathan, as you press the J key, the directory locates contacts whose
names begin with "J". As you key in the next letter, i.e., O, contacts whose names begin
with "Jo" appear, etc.
49
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
6.14
Searching for a Contact in the Corporate Directory using
T9
Note: The T9 feature only applies to searching for a contact in the Corporate directory.
The T9 (Text on 9 keys) feature (enabled by default) lets you press the 2 key, for example, on the
dial pad to input the letter C. You only need to press it once. So to input Charles, you can press
2427537.
T9 supports predictive search, so as letters are entered, T9 displays possibilities before you finish
entering the name. If the name Alex, for example, appears multiple times in the corporate
directory, users can enter ALEX, space (*), and then the first letter of the family name – or the
first letter of the middle name, if there is one.
To access a contact in the Corporate Directory using T9:
1.
Open the Corporate Directory (press the CONTACTS hard key and in the Favorites screen
that opens, press the
softkey and select Corporate directory).
2.
Note that T9 is enabled by default. On the dial pad, press the key displaying the contact's
name's first letter, for example, J, for James. You only need to press J once. Then press the
key displaying the second letter, A; you only need to press it once.
3.
If James is displayed, press the OK softkey; if not, press the key displaying M and continue
until James appears.
4.
If there are multiple results, use the * key on the dial pad to enter a space and then enter the
first letter of the family name.
6.14.1 Changing from T9 to A/a/1
You can search for a contact in the Corporate directory using T9 (default) or A/a/1.
To change from the default T9 to A/a/1:
Open the Corporate directory (press the CONTACTS hard key and in the Favorites screen
that opens, press the
softkey and select Corporate directory).
In the directory, press the A/a/1 softkey and choose your preference:
User's Manual
50
Document #: LTRT-12044
User's Manual
6.15
6. Customizing the Phone
Defining a Speed Dial
You can place a call to a contact by pressing a phone key (1-9) that has been defined as a Speed
Dial.
6.15.1 Defining a Phone Key as a Speed Dial
You can define a phone key as a Speed Dial. This section shows how a Speed Dial is typically
defined, i.e., MENU key > Speed Dial.
Note: Two alternative ways to define a Speed Dial are:
• Long-press on a key (1-9) that has not yet been defined as a Speed Dial; the Speed Dial
#1 (for example) screen opens.
• Access the 'Modify contact' screen, enter the contact's phone number and press the Sp.
Dial softkey.
To define a phone key as a Speed Dial:
1.
Access the Speed Dial screen (MENU key > Speed Dial):
1.
Navigate to an empty Speed Dial (that has not yet been defined):
2.
Press the Select softkey; the Speed Dial #2 screen (in this example) is displayed:
Note: Speed Dial #1 defines phone key 1. Speed Dial #9 defines phone key 9.
3.
Define the phone number to which the Speed Dial will dial: In the ‘Type Number’ field, enter
the phone number that the Speed Dial key will dial -OR- navigate down and select Select
from Directory > select the directory > navigate to and select the contact:
-OR-
4.
Select the contact and press Save; a Speed Dial is created to that contact.
Note: These are your own private SDs. They are preserved even if you sign out of the phone,
sign in with another user, sign out as that user, and then sign in again as your own user.
Version 3.0.1
51
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
6.15.2 Configuring Pause Dialing for a Speed Dial to an Ext. behind an IVR
Your network administrator can configure pause dialing for a Speed Dial, in order to create a time
break. This is typically required for a Speed Dial which dials a destination extension number that
is behind an Interactive Voice Response (IVR) system.
Note: Consult your network administrator if you need a pause dialing configured for a Speed
Dial. See the Administrator's Manual for more information.
6.15.3 Using a VocaNOM Speed Dial
A softkey on your phone can be configured as a VocaNOM speed dial for quicker and friendlier
voice dialing ability. Ask your network administrator to provide the functionality if you require it.
After it is configured, you will see the following VocaNOM softkey displayed in the phone's idle
screen:
6.15.4 Editing a Speed Dial
You can edit a Speed Dial.
To edit a Speed Dial:
1.
Access the Speed Dial screen (MENU > Speed Dial).
2.
Navigate to and select the Speed Dial to edit.
3.
Modify the fields as required.
4.
Press the Save softkey to save your settings.
6.15.5 Deleting Speed Dials
You can delete a Speed Dial.
To delete a Speed Dial:
1.
Access the Speed Dial screen (MENU key > Speed Dial).
2.
Navigate to and select the Speed Dial to delete.
3.
In the ‘Type Number’ field, use the Clear softkey to delete the contact's phone number.
4.
Press the Save softkey; the Speed Dial is listed as 'Empty':
User's Manual
52
Document #: LTRT-12044
User's Manual
6.16
6. Customizing the Phone
Defining Phone Keys as Paging Dials
You can define a phone key as a paging dial. This is done in the Speed Dial screen. You can
access this screen via
MENU key > Speed Dial
-ORLong-press a dialpad key (1-9) not yet defined as a Speed Dial
Note: Make sure the group paging feature is enabled – consult your IT administrator.
To define a phone key as a paging dial:
1.
Open the Speed Dial screen (MENU key > Speed Dial).
2.
Select an Empty. You can select 1-9. This screen is displayed:
3.
Navigate to Paging (use the right rim of the navigation control button):
4.
Press the Select softkey; this screen is displayed:
5.
In the 'Group Name' field, enter the name of the group, to be displayed in the phone's screen
when there's an incoming / outgoing paging call.
6.
Scroll down to the 'Multicast Address' field and enter the paging group's multicast IP
address. Default: 224.0.1.0. For phones to be in a group, all must be configured with the
identical multicast address.
7.
Scroll down to the 'Multicast Port' field and enter the group's port. Default: 8888. For phones
to be in a group, all must be configured with the identical port.
8.
Press the Save softkey; the key is defined as a paging dial.
Version 3.0.1
53
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
6.17
Changing your Presence Status
You can assign a presence status to control whether you want people to contact you and, if so,
how. By default, your status is based on your Skype for Windows client.
Note:
• Presence status can be changed by your Skype for Windows client running on your
computer. This status is reflected on the phone's screen.
• After n minutes (configured in the Skype for Windows server by your administrator),
presence status automatically changes to ‘Inactive’.
• n minutes after this (also configured in the Skype for Windows server by your
administrator), presence status automatically changes to ‘Away’; all calls are then
automatically forwarded to the RGS (Response Group Service) if it is configured.
To set/change presence status:
1.
In the idle screen, press the Status softkey:
2.
Navigate to a presence status:
Table 6-2: Presence Statuses
Presence Status
Description
Available
You're online and available for others to call.
Busy
You’re busy and don’t want to be interrupted.
Do not disturb
You don’t want to be disturbed. Stops the phone from ringing when others call
you. If DnD is activated, callers hear a tone indicating that your phone is busy;
the call is blocked and your idle screen indicates 'Missed Calls'.
Away
You want to hide your status and appear to others you're currently away.
Be right back
You'll be away briefly and you'll return shortly.
3.
Press the Select softkey; the status you selected is displayed in the idle screen:
4.
To reset your presence status, navigate to Reset in the Status screen and press the Select
softkey; your status is received from the Skype for Windows server and automatically
updated.
User's Manual
54
Document #: LTRT-12044
User's Manual
6.18
6. Customizing the Phone
Viewing Microsoft Exchange Calendar in the Phone
Screen
You can view Microsoft Exchange Calendar items displayed in the phone's screen. Only items
whose start date and time fall on the viewing date and time are presented.
Note: If the feature is disabled, ask your network administrator to enable it. For more
information, see the Administrator's Manual.
Note:
• For this feature to function:
√ The feature must be enabled by your network administrator if it isn't enabled already
(the default is enabled). For more information, see the Administrator's Manual.
√ You need to sign in to the phone with your username and password. If you signed in
with your PIN code, the feature will not be available and you'll receive the message
below. Features such as this one which are activated from Microsoft's Exchange Server
are only available after signing in to the phone with username and password.
To view your Microsoft Exchange calendar items:
1.
Press the MENU hard key on the phone and then in the Menu screen, select the Calendar
option.
2.
View the next scheduled meeting - demonstrated in the illustrative examples below:
3.
In an online meeting defined as a Skype for Business meeting shown to the left above, you
can press the displayed Join softkey in order to join in. In the offline, non Skype for Business
meeting shown to the right above, you can press the Details softkey:
4.
You can scroll to view other meetings scheduled on that date.
Version 3.0.1
55
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
6.19
Receiving Meeting Reminders
The phone automatically pops up meeting reminders for meetings defined as Skype for Business
meetings. Meeting reminders pop up in the phone's idle screen at the time defined for them in the
meeting invitation.
Note: If the feature is disabled, ask your network administrator to enable it. For more
information, see the Administrator's Manual.
You can Snooze a Reminder, or Dismiss it. If you select Dismiss, the Reminder does not pop up
again; you'll still be able to access Calendar items and view the meeting.
If you select Snooze, the Reminder pops up 10 minutes before the start of the meeting, five
minutes before the start of the meeting, and when the meeting begins.
The feature therefore allows you to receive advance notice about meetings and to enjoy direct
access to them by clicking Join.
User's Manual
56
Document #: LTRT-12044
User's Manual
7
7. Performing Basic Operations
Performing Basic Operations
This section shows how to perform basic phone operations.
7.1
Using Audio Devices
You can use one of the following audio devices on the phone for speaking and listening:
Handset: To make a call or answer a call, lift the handset off the cradle.
Speaker (hands-free mode). To activate it, press the speaker key during a call or when
making a call. To deactivate it, press the speaker key again.
Headset (hands-free mode). When talking on the phone, you can relay audio to a connected
headset. To enable it, press the headset key. To disable it, press it again.
You can easily change audio device during a call.
To change from speaker/headset to handset: Activate speaker/headset and pick up the
handset; the speaker/headset is automatically disabled.
To change from handset to speaker/headset: Off-hook the handset and press the
speaker/headset key to activate the speaker/headset. Return the handset to the cradle; the
speaker/headset remains activated.
7.2
Making Calls
The phone offers multiple ways of making a call. After dialing a number:
The screen displays
the phone directory
and the called party’s phone number or contact name if it's listed in
The screen displays the line extension number on which the called party is dialed
The phone plays a ring-back tone
Screen indications:
To end dialing a call before it's answered:
Press the End softkey or the speaker key.
Note: For advanced dialing using the phone directory, see Section 6.13 on page 44.
For defining a speed dial key, see Section 6.15 on page 51.
Version 3.0.1
57
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
7.2.1
Dialing
This section shows how to dial. To dial, either (1) key-in the number on the keypad (2) press the
speaker key and enter the number (3) press the speaker key or lift the handset and enter a URL
address (e.g., host and domain name, or IP address) or alphabetical letters (e.g., tvservice).
To dial a regular-digits phone number:
1.
On the keypad, key the first digit of a regular phone number; the screen displays the digit in
the NEW CALL field; key in the remaining digits. To delete (from right to left) entered digits,
press the Clear softkey. To cancel the call, press the Cancel softkey.
2.
Do any of the following:
•
Don't do anything; dialling is automatically performed after a few seconds.
•
Press the Dial softkey; dialing is performed.
•
Pick up the receiver; dialing is performed.
•
Press the Speaker button; dialing is performed.
•
Press # (if you switched on speaker/handset/headset before keying in the digits of the
phone number); dialing is performed.
To dial a URL:
1.
Press the speaker key or lift the handset; the screen displays the NEW CALL field and the
URL softkey:
2.
Press the URL softkey and enter a URL address (see Section 4.4 for information on how to
switch between letters, numerals and symbols). To delete (from right to left) entered
letters/numerals/symbols, press the Clear softkey. To cancel the call, press the Cancel
softkey.
3.
Press the Dial softkey.
User's Manual
58
Document #: LTRT-12044
User's Manual
7.2.2
7. Performing Basic Operations
Redialing
You can redial a number previously dialed.
To redial:
1.
Press the REDIAL key; the Dialed Calls screen is displayed, listing in chronological order,
recently dialed numbers:
2.
Navigate to and select the number to redial.
3.
Press the Dial softkey or press the OK key.
Version 3.0.1
59
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
7.2.3
Dialing a Missed Call
The phone logs all missed calls. The screen in idle state displays the number of missed calls (if
any):
To dial a missed call:
7.3
1.
Press the Missed softkey; the Missed Calls screen is displayed:
2.
Navigate to the missed call to dial.
3.
Press the Dial softkey or press the OK key.
Answering Calls
The phone indicates an incoming call as follows:
The screen displays
the phone directory):
together with the caller’s phone number (or contact name if listed in
Phone rings.
Ring LED flashes blue.
To answer:
Pick up the handset -orPress the headset key (ensure that the headset is connected to the phone) -orPress the speaker key -orPress the Accept softkey (the speaker is automatically activated)
When you answer, the screen displays
(if answered by handset) or
speaker) and the caller’s details and call duration:
(if answered by
Note:
• HD in the screen indicates a high-definition call (using a wideband voice coder).
• When two incoming calls occur simultaneously, the names of the calling parties appear on
the screen and the adjacent incoming call icons flash. If a user is in a call and a third party
calls, the name of the calling party appears on the screen and the adjacent incoming call
icon flashes.
User's Manual
60
Document #: LTRT-12044
User's Manual
7.4
7. Performing Basic Operations
Rejecting Incoming Calls
You can reject an incoming call; the caller hears a busy tone from your phone if you do.
To reject an incoming call:
Press the Reject softkey.
7.5
Silencing Incoming Calls
You can silence an incoming call's ringing. When you do, the caller hears normal ringing but no
answer.
To silence the ringing of an incoming call:
Press the Silent softkey.
Answer a silenced call by pressing the Accept softkey or picking up the handset.
7.6
Making a New Call Even Though a Call is Coming in
Users can make a new call even though a call is coming in. This is typically necessary when it is
more important and more pressing to make a new call than to accept any incoming call.
To make a new call when a call is coming in:
1.
In the INCOMING CALL (Steve) screen, press the New Call softkey:
2.
In the NEW CALL screen, enter the number of the destination to which to call, and press the
then-enabled Dial softkey. If necessary, you can clear digits entered / cancel the new call.
3.
When the called party answers, you can toggle to the calling party and reject or accept them.
Version 3.0.1
61
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
7.7
Ending an Established Call
You can end an established call.
To end an established call:
Return the handset to the phone cradle if it was used to take the call -orPress the headset key -orPress the speaker key -orPress the End softkey
7.8
Viewing Missed, Received and Dialed Calls
Your phone logs missed, received and dialed calls. In idle state, the screen displays 'Missed' and
the number of missed calls (if any). In the example below, 1 missed call is indicated.
To view missed calls:
Press the Missed softkey.
Note: After viewing, the indication disappears from the screen. The next time a call is missed,
the indication will reappear.
To view call history:
1.
Access the Call Log screen (MENU key > Call Log menu).
2.
In the Call Log screen, navigate to and select the call log you require.
3.
User's Manual
•
All Calls = calls that were missed, received and dialed
•
Missed Calls = calls that were not answered
•
Received Calls = the most recently answered numbers
•
Dialed Calls = the most recently dialed numbers
Navigate to the option you want and press the Select softkey; a list of the logged calls is
displayed, for example, Dialed Calls:
62
Document #: LTRT-12044
User's Manual
4.
7. Performing Basic Operations
Press the softkey you need:
•
Dial = dials the number of the selected logged entry.
•
Save = saves the related information about the call entry in the Personal directory (to
add a contact in the directory, see Section 6.13 on page 44).
•
Detail = accesses the Call Details screen, which displays details of the call entry:
The Call Details screen displays the following logged call information:
•
Number = phone number logged
•
Time = the time the call was logged
•
Date = the date on which the call was logged
•
Duration = the duration of the call
Notes:
• The call history lists are stored from the newest to oldest entries. The maximum number of
entries for each call history type is 200. Once this maximum is attained, the oldest entry is
deleted and replaced with the new entry.
• The call history lists are saved on a daily basis. In the case of a power outage, some of the
received information may be lost.
• If you view missed calls by pressing the Missed softkey, the missed calls notification no
longer appears on the screen and reappears the next missed call.
Version 3.0.1
63
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
This page is intentionally left blank.
User's Manual
64
Document #: LTRT-12044
User's Manual
8
8. Performing Advanced Operations
Performing Advanced Operations
This section shows how to perform advanced operations.
8.1
Answering Waiting Calls
You can accept a call on an extension on which there already is an active call.
To answer a waiting call:
1.
A call with James is in progress
2.
A call comes in from Jordan
= call waiting
3.
Press the Accept softkey; the waiting call from Jordan is answered; the previous call from
James is put on hold:
4.
To toggle between calls, press the navigation control's upper or lower rim.
Note: To enable / disable call waiting, see Section 6.3 on page 33.
Version 3.0.1
65
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
8.2
Placing a Call On Hold
You can place a call on hold in order to answer an incoming call (see Section 8.1 on page 65) or
to make another call. The party put on hold will hear music played (Music on Hold (MOH)).
To place a call on hold:
Accept an incoming call and then press the HOLD key on the keypad or press the Hold
softkey; the call is put on hold:
To retrieve a call on hold:
Press the HOLD key again -or- press the Resume softkey.
Note: When using the handset in a call, if the handset is on-hooked after putting the call on
hold, the call is not disconnected and the audio is switched to the speaker. For the call to be
disconnected, as it was in earlier versions, refer to your network administrator.
8.3
Handling Multiple Incoming Calls
The phone is capable of handling up to eight concurrent calls per line. Multiple calls can be put on
hold and you can switch between them. This feature is important for front desk personnel.
To manage multiple incoming calls:
If a call comes in from Donald and then after it, a call comes in from Steve, when you answer
Steve, Donald is put on hold.
If a third call comes in, this one from Alan, and you answer it, Steve is also put on hold, so
now both Donald (caller 1) and Steve (caller 2) will be on hold.
To toggle between callers:
Press the upper or lower rim of the control button to navigate from one caller to another.
User's Manual
66
Document #: LTRT-12044
User's Manual
8.4
8. Performing Advanced Operations
Calling a Contact from 'Favorites'
You can directly call from the phone any contact that is listed in your Skype for Business client's
'Favorites'.
To call a contact listed in 'Favorites':
8.5
1.
Press the CONTACTS key.
2.
Navigate to the contact to call and then press the Dial softkey or the OK hard key.
Using a Speed Dial to Place a Call
To define key (1-9) as a Speed Dial, see Section 6.15 on page 51.
To use a Speed Dial to place a call:
Long-press the key (1-9) on the keypad which you defined as a Speed Dial; the phone dials
the defined phone number of the contact.
Note: If you long-press a key which has not been defined as a Speed Dial, the screen
displays screen Speed Dial # enabling you to define a Speed Dial.
Version 3.0.1
67
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
8.6
Transferring Calls
You can transfer a call to another party using blind transfer (default) or consultative transfer.
Transfer
Description
Blind
Connects another party to a third party before the third party answers.
Consultative
Connects another party to a third party after the third party answers and
agrees to take the call from the second party.
8.6.1
Performing a Blind Transfer
You can transfer a call to a destination party without consulting them.
To perform a blind transfer:
1.
Steven asks you – Donald - to transfer him to Hilary. Press the BXfer softkey displayed by
default during calls; if it isn't displayed, your network administrator has disabled it. In this
case, press the
softkey and in the Call Menu that opens, navigate to and select the Blind
transfer option. The TRANSFER TO screen opens.
2.
Enter Hilary's number and then press the now-available Trans. softkey:
Hilary's phone rings. When she answers, your screen returns to idle mode (you're
disconnected) and Hilary and Steve are connected.
8.6.2
Performing a Consultative Transfer
You can consult with a party before transferring the call to them.
To perform a consultative transfer:
1.
Steve asks you – Donald - to transfer him to Hilary. Press the
down to select Consultation transfer.
softkey and then scroll
The TRANSFER TO field opens and a dial tone is heard. Steve is put on hold and Music on Hold
is played to him.
User's Manual
68
Document #: LTRT-12044
User's Manual
8.6.3
8. Performing Advanced Operations
2.
Enter Hilary's number and then press the now-available Trans softkey; Hilary's phone rings
and Hilary answers.
3.
Press the Trans. Softkey; Hilary is connected to Steve and your screen returns to idle mode.
Performing a Semi-Consultative Transfer
Instead of consulting extensively with the destination party after they answer, you can transfer the
call when they say hello. Semi-consultative transfer allows you to identify the voice of the
destination party before transferring the call to them, without asking them whether they agree to
take the call or not.
Note: The feature is by default disabled. For the feature to be available, your enterprise
network administrator must enable it on the phone. See the Administrator's Manual for details.
To perform a semi-consultative transfer:
1.
Steve asks you - Hilary - to transfer him to Donald. Press the
and select the Consultation transfer option.
softkey, as shown above,
2.
Enter Donald's number and press the now-enabled Dial softkey.
3.
Before Donald answers, press the Trans softkey; Donald is connected with Steve.
Note: If your network administrator has not enabled the feature, the Trans softkey will not be
displayed.
Version 3.0.1
69
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
8.6.4
Merging Calls
You can merge two separate calls into one conference call if you're in a call and you want to add
another participant to the established call.
Merging therefore is in effect similar to adding a participant to a conference. It can be performed
via the phone's menu softkey or via the Skype for Business client if the user is paired.
To merge calls:
1.
While in a call with Steve, you (Donald) decide you want to add Hilary to the conversation.
Press the
softkey and then select New Call.
2.
In the New Call field, enter Hilary's number and press the now-enabled Dial softkey; Hilary's
phone rings.
3.
When Hilary answers, press the
now in the conversation.
User's Manual
softkey and then select Merge Calls; all three of you are
70
Document #: LTRT-12044
User's Manual
8.7
8. Performing Advanced Operations
Parking a Call
You can park a call, i.e., you can transfer a call to a "parking lot" for it to be picked up on any
other phone in the enterprise by a party who must dial a retrieval number in order to retrieve it on
that phone. The retrieval number is configured in the Skype for Windows server's parking lot
parameter. Your system administrator can change the retrieval number if required.
Tip: Don't park a call unless you know precisely who you want to answer it. If you park a call,
it can be answered by anyone in the enterprise listed in the Skype for Windows server's
parking lot parameter.
To park a call:
1.
When you're in a call, press the
Parking Lot option:
softkey and then navigate to and select the Transfer to
The screen notifies you of the retrieval number to dial to retrieve the call on another phone:
8.8
2.
On another phone, dial the retrieval number (835 in the example above); the call is pulled to
that phone.
3.
You can pull the call back to the phone which it was originally on by pressing the Retrieve
softkey.
Configuring Group Call Pickup (GCP)
The GCP feature enables enterprise employees to pick up calls that are ringing for another user,
by dialing a call pickup group number. Only employees configured in the Skype for Windows
server's GCP parameter can pick up the call. Consult your system administrator if required.
8.9
Initiating a Multi-Party Skype for Business Remote
Conference
A multi-party call conference based on the Skype for Business server (remote conference) can be
initiated from the phone.
Note: This section describes conferencing when Better Together over Ethernet (BToE) is not
installed. See Section 8.13.3 for information about conferencing when BToE is installed.
In versions preceding 3.0, supported conference capability was locally based (phone based). As
of version 3.0, the phone of the conference initiator uses CCCP (Centralized Conference Control
Protocol) to establish the conference. The feature is integrated with Microsoft Exchange, so in an
email invitation to join a Skype for Business meeting, you can click a Join link.
Version 3.0.1
71
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
To initiate a conference:
1.
In the phone's idle screen, press the Conf softkey; the CONFERENCE screen opens
indicating No Participants.
3.
Press the Add softkey; the ADD PARTICIPANT screen opens.
4.
Enter the participant's phone number. Either:
5.
•
Press the URL softkey, use the alphanumerical selection displayed to enter the
participant's URL (see Section 4.4 for more information), and press the Dial softkey.
•
Press the
softkey; the contacts added to 'Favorites' in the Skype for Business
client are by default displayed. . If the contact you are searching for is not in your
'Favorites', you can search in the Corporate Directory, Personal Directory, Outlook
Contacts or Others to find them (see Sections 6.13 and 6.14 for more information about
the directories). Press the Dial softkey.
•
Press the
softkey, choose a Call Log (e.g., Dialed Calls, as shown below),
navigate to the participant and then press the Dial softkey (see Section 6.13 and 6.14
for more information about the Call Logs).
After adding and dialing a participant, add and dial the others to include in the conference.
To view conference participants:
Open the CONFERENCE screen. From the phone's idle screen, press the Meet Now
softkey; the CONFERENCE screen opens.
To remove a conference participant:
In the CONFERENCE screen, navigate to the participant to remove, and then press the
softkey. In the Call Menu screen that opens, select the Remove option.
User's Manual
72
Document #: LTRT-12044
User's Manual
8. Performing Advanced Operations
To change a participant's privileges:
Note: The icon adjacent to each participant in the CONFERENCE screen indicates that that
participant has got 'host' privileges (relevant only to Skype for Business users rather than to
PSTN/mobile calls, for example):
Participants with 'host' privileges can perform every action: far mute, mute all, remove, etc.
Participants with 'attendee' privileges can only add participants, no more.
1.
In the CONFERENCE screen, navigate to the participant whose privileges you want to
change, and then press the
softkey.
2.
In the Call Menu screen that opens, select the Attendee option; the participant's privileges
will change to 'attendee' privileges and the icon indicating 'host' privileges in the
CONFERENCE screen will disappear.
To mute all participants:
In the CONFERENCE screen, press the
opens, select the MuteAll option.
softkey and in the Call Menu screen that
To lock a conference:
In the CONFERENCE screen, press the
softkey and in the Call Menu screen that
opens, select the Lock Conference option.
To view conference information:
In the CONFERENCE screen, press the
opens, select the Conf.Info option.
softkey and in the Call Menu screen that
To mute a remote participant:
In the CONFERENCE screen, navigate to the participant to mute and then press the Far
Mute softkey.
On the participant's screen, the mute key illuminates red and the following message is displayed:
A presenter has muted you
Version 3.0.1
73
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
To unmute a remote participant:
In the CONFERENCE screen, navigate to the participant to unmute and then press the
UnMute softkey.
On the participant's screen, the following message is displayed: A presenter wants you to
unmute yourself. The participant should press the illuminated mute button on their phone to
unmute.
8.10
Muting Calls
You can mute the microphone of the handset, headset, or speaker during a call so that the other
party cannot hear you. While the call is muted you can still hear the other party. Muting calls can
also be used during conference calls.
To mute/unmute:
1.
During a call, press the mute key on the phone:
2.
To unmute, press the mute key again and resume the conversation.
User's Manual
74
Document #: LTRT-12044
User's Manual
8.11
8. Performing Advanced Operations
Paging
You can page others in your group and they can page you after configuring the group and the
paging dial on the phone. For detailed information on setting up a paging group and a key on the
phone to dial the paging group, see Section 6.16.
8.11.1 Performing Outgoing Paging Calls
You can page others in your group. You can use the speaker, handset or headset as the audio
device.
To page others in your group:
1.
Press the key on the phone (1-9) that you assigned for paging; your phone displays this:
2.
Pick up the receiver and make the announcement (or talk directly into the speaker or
headset).
8.11.2 Receiving Incoming Paging Calls
Others in your group can page you.
To receive a paging call from another in your group:
1.
View in your phone's screen which group (member) is paging you and listen for the incoming
paging call:
Note: If you're in a call when the paging call comes in and the 'Barge-in' feature was left at its
default (disabled) by your administrator, you're prompted to accept/reject the paging call (see
below).
2.
Press the Accept softkey to hear the paging call; the regular call you were in is put on hold.
Note: If you'd have pressed the Reject softkey, you'd have continued with the regular call
and not heard the paging call.
Version 3.0.1
75
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
3.
Press the Resume softkey when the paging call ends.
Note: If you're in a call when the paging call comes in and the 'Barge-in' feature was enabled
by your administrator, the paging call will barge into the regular call (see below).
4.
Press the End softkey (optional) to end the paging call; the regular call is put on hold.
5.
Press the Resume softkey; the regular call is resumed.
User's Manual
76
Document #: LTRT-12044
User's Manual
8.12
8. Performing Advanced Operations
Setting up Better Together over Ethernet
This section shows how to set up the Microsoft Skype for Windows feature 'Better Together over
Ethernet' on AudioCodes' 400HD Series of IP Phones.
BToE enables operations to be mirrored on both AudioCodes' phone and the Skype for Windows
client on the PC, so that these operations can be controlled from either the phone or the PC,
whichever is convenient to the user at the time, for enhanced unified communications and
optimized enterprise efficiency.
After your phone is paired with your Skype for Windows client, you can control (from phone or
PC) operations such as answering incoming calls, making outgoing calls (click-to-dial), putting
calls on hold and resuming them, and making conference calls.
8.12.1 Installing the BToE PC Application
This section shows how to install AudioCodes' BToE PC application.
To install the BToE PC application:
1.
After obtaining the installation file whose name will be either AudioCodes BToE.exe or
AudioCodes BToE.msi, save it to your PC and then double-click it.
Note:
• The msi file is for the purpose of IT administrator distribution. Users are not allowed to
install BToE using the msi file, only using the exe file.
• After installing with the exe, then when upgrading the exe must be used. Upgrading with
the msi cannot be done if the first installation was with the exe, and vice versa.
• Some PCs require the installation of .Net 4.0 prior to the installation of the BToE
PC/laptop application. If you use the installation file AudioCodes BToE.exe, the
Installation Wizard will detect that .Net 4.0 is missing and will prompt you to install it:
When installing the BToE PC/laptop application using the installation file AudioCodes
BToE.msi, you won’t be prompted to install .Net 4.0 and the network administrator should
make the necessary preparations prior to installation of the BToE PC application.
Version 3.0.1
77
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
The Prepare to Install screen opens showing preparation progress until the Welcome to the
InstallShield Wizard screen opens:
Figure 8-1: InstallShield Wizard – Preparing to Install
Figure 8-2: Welcome to the InstallShield Wizard
3.
User's Manual
Click the Next button; the License Agreement screen opens.
78
Document #: LTRT-12044
User's Manual
8. Performing Advanced Operations
Figure 8-3: License Agreement
4.
Select the I accept… option and click Next.
Figure 8-4: License Agreement
5.
Version 3.0.1
Click Next; the Destination Folder screen opens.
79
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
Figure 8-5: Destination Folder
6.
To change the default Destination Folder, click Change and proceed to step 6.
To leave the Destination Folder at its default, click Next and proceed to step 7.
Figure 8-6: Change Current Destination Folder
7.
Click OK; you're returned to the Destination Folder screen.
8.
Click Next; the Ready to Install screen opens.
User's Manual
80
Document #: LTRT-12044
User's Manual
8. Performing Advanced Operations
Figure 8-7: Ready to Install
9.
Click the Install button; the Installing AudioCodes Better2Gether screen opens indicating
installation progress status.
Figure 8-8: Installing AudioCodes Better2Gether
10. Wait until the following screen is displayed:
Version 3.0.1
81
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
Figure 8-9: InstallShield Wizard Completed
11. Click the Finish button and then check your Windows taskbar and locate the newly
displayed AudioCodes icon (AC) as shown below:
Figure 8-10: AudioCodes Icon in Taskbar
12. Wait until the “Installing device driver software” process completes:
13. Check your programs in the Control Panel > Programs. You should see:
User's Manual
82
Document #: LTRT-12044
User's Manual
8. Performing Advanced Operations
Figure 8-11: Control Panel>Programs>AudioCodes Better2Gether
Note: You can use this entry in the Control Panel > Programs to uninstall.
14. Access Computer Management > Services and Applications and locate BToE:
Figure 8-12: Computer Management > Services and Applications
15. Access the Device Manager and locate 'AudioCodes B2GoE USB driver'.
Version 3.0.1
83
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
Figure 8-13: Device Manager > AudioCodes B2GoE USB Driver
You've successfully installed the program.
User's Manual
84
Document #: LTRT-12044
User's Manual
8. Performing Advanced Operations
8.12.2 Making Sure BToE is Correctly Installed
This section shows how to make sure Better Together over Ethernet is correctly installed.
To make sure BToE is correctly installed:
1.
Click the AC (AudioCodes) taskbar icon; the following menu pops up:
Figure 8-14: Popup Menu
2.
Select the About… menu option to verify the DLL and BToE version:
Figure 8-15: About AC BToE
8.12.3 Configuring the BToE TCP Port
You can opt to configure a different BToE TCP port to the default 9999, depending on the
requirements of your enterprise. For example, you may decide to change the BToE TCP port to
5000 because your enterprise is using the default port of 9999, and 5000 is available. This
feature therefore provides enterprise administrators with more freedom in network administration.
Note: If you decide to change the default BToE TCP port, you must update both the
PC/laptop and the phone with the new BToE TCP port number.
To change the BToE TCP port on the PC/laptop side:
1.
Click the AC (AudioCodes) taskbar icon; the menu shown in Figure 8-14 pops up.
2.
Select Disconnect in the popup menu and then select Configuration > TCP Port.
Figure 8-16: TCP Port
Version 3.0.1
85
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
3.
From the AC BTOE TCP Port dialog that opens, configure the TCP Port:
Figure 8-17: AC BToE TCP Port
The valid range is 1 to 65535.
To change the BToE TCP port on the phone side:
See the Administrator's Manual.
8.12.4 Enabling BToE for Online Users
Note: To enable BToE for online users, the Skype for Business server must be configured to
enable BToE.
8.12.5 Automatically Pairing the BToE PC/Laptop Application with the
Phone
Pairing is automatically performed when the phone's PC port is connected to the PC/laptop
'behind' the phone. See the Administrator's Manual for more information.
Note: Automatic pairing requires BToE PC/laptop application Version 2.x.
If the laptop after automatic pairing is disconnected and moved to another location, its
speaker/headset becomes the audio device associated with the Skype for Business client.
If the laptop is manually paired and then relocated, Skype for Business audio will remain through
the phone. It's therefore advisable to pair automatically.
Note: If the BToE PC/laptop application has already been manually paired with the phone, as
shown in the section below, and you want to automatically pair, you must delete the old pair
code from the BToE PC/laptop application in order to allow BToE automatic pairing:
User's Manual
86
Document #: LTRT-12044
User's Manual
8. Performing Advanced Operations
8.12.6 Manually Pairing the BToE PC/Laptop Application with the Phone
This section shows how to pair AudioCodes' BToE PC/laptop application with the phone using a
pair code. Pair like this:
1. Generate a pair code (see Section 8.12.6.1)
2. Connect the phone and BToE PC/laptop application using the pair code (see
Section 8.12.6.2)
Note:
• If a change of IP address occurs, you'll need to generate a pair code again.
• If you know the last generated pair code, you do not need to generate a new one.
If you don't know it, continue as described below.
8.12.6.1 Manually Generating a Pair Code
This section shows how to manually generate a pair code.
Note: The phone is by default automatically paired with the PC/laptop. If you want to
manually pair, consult with your network administrator. See the Administrator's Manual.
To manually generate a pair code:
1.
Press the MENU hard key on the phone; the screen displays the Menu screen.
2.
Press the BToE softkey; the BToE pair code is displayed:
This is the pair code that will be used by the BToE PC/laptop application. Make a note of it for
reference when connecting the phone with the BToE PC/laptop application.
Version 3.0.1
87
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
8.12.6.2 Manually Connecting the Phone with the BToE PC Application
This section shows how to connect the phone with the BToE PC/laptop application.
To connect the two:
1.
Open the AudioCodes BToE Connect screen: Click the BToE client icon placed on your
taskbar after installation; the following popup menu opens.
Figure 8-18: Popup Menu
2.
Select the Phone Pairing option
Figure 8-19: Phone Pairing
3.
In the 'Type the pair code' screen, enter the pair code that you generated as shown in
Section 8.12.6.1; the OK button is activated after 8 characters are entered.
3.
Click the OK button; BToE is activated.
4.
If a communication error occurs or the wrong pair code was entered, the following icon
indication appears:
Figure 8-20: AC BToE Failed Indication
5.
When BToE is successfully connected, view the following icon indication:
Figure 8-21: AC BToE is Connected Indication
6.
User's Manual
When BToE is in 'Connected' state, the popup menu shows the Disconnect menu item and
the Phone Pairing menu item is deactivated:
88
Document #: LTRT-12044
User's Manual
8. Performing Advanced Operations
Figure 8-22: Popup Menu: 'Disconnect' Enabled, 'Phone Pairing' Disabled
7.
After selecting the Disconnect menu option, the 'AC BToE Disconnected' indication is
displayed:
Figure 8-23: BToE Disconnected
8.
From the popup menu as well you can see if BToE is disconnected:
Figure 8-24: Popup Menu: BToE Disconnected
Note: When BToE is connected, you can select the Phone Web menu option to open the
phone's the Web interface.
9.
Use the table below as reference when determining BToE's connection state from the
taskbar icon.
Taskbar Icon
BToE's connection state
BToE is connected
BToE is disconnected
BToE is connected but a failure is preventing a correct connection. The failure can be a
network problem or the wrong pair code was defined.
Version 3.0.1
89
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
10. From the click popup menu, you can select the Exit option; the BToE PC application stops.
You can activate the application again from the Start menu as shown in Figure 8-25.
Figure 8-25: Start > Programs > AudioCodes > BToE Controller
User's Manual
90
Document #: LTRT-12044
User's Manual
8. Performing Advanced Operations
8.12.6.3 Connecting the Skype for Windows Client with the Phone
This section shows how to connect the Microsoft Skype for Windows client with the phone using
the Skype for Windows login screen.
To connect the two:
Enter your credentials in the Skype for Windows Sign-in request prompt, and click OK.
Figure 8-26: Skype for Windows Sign-in Request Prompt
Note: Primary Device cannot be changed in the Skype for Windows PC client during a call.
When the phone is in idle mode (not in a call), the PC/laptop application must be
disconnected in order to change Primary Device. See the Release Notes.
8.12.7 Making Sure Phone/ Skype for Windows Client are Paired
This section shows how to make sure you successfully paired your phone with the Skype for
Windows client.
8.12.7.1 Making Sure Skype for Windows Client is Paired
You can make sure the Skype for Windows client is paired with the phone.
To make sure the Skype for Windows client is paired with the phone:
1.
In the Skype for Windows client application, in the lowermost left corner of the screen, click
the Select Primary Device icon
; the following popup menu opens:
2.
Make sure Handset AudioCodes 400HD Phone is selected.
Version 3.0.1
91
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
8.12.7.2 Making Sure the Phone is Paired
You can determine from the phone's idle screen if the phone is paired with the Skype for
Windows client. The idle screen below indicates the phone is not paired:
The two interlocked rings in the idle screen below indicates the phone is paired.
After connecting, 'BToE Activated' pops up, and then disappears; the two interlocked rings
remain.
User's Manual
92
Document #: LTRT-12044
User's Manual
8.13
8. Performing Advanced Operations
Using BToE Functions
This section shows how to use your phone as an extension of your Skype for Windows client, and
how to use your Skype for Windows client as an extension of your phone, for enhanced unified
communications and optimized efficiency.
Before using BToE functions, you need to install BToE. See the Administrator's Manual for
detailed information on installing BToE. Before using BToE functions, make sure in Skype for
Windows client that the 'Primary Device' selected is Handset AudioCodes BToE.
8.13.1 Signing In
You can sign in to the phone from the Skype for Windows client.
To sign in to the phone from the Skype for Windows PC client:
1.
2.
Version 3.0.1
Sign out from the phone.
a.
In the phone's idle screen, press the Status softkey:
b.
In the Status screen, press the Sign out softkey; the phone goes offline and the Skype
for Windows client on the PC prompts you for Logon information:
In the Skype for Windows client Logon information prompt, enter the same Password you
use to access your PC, and then click OK; the phone's user interface displays the
registration process, the phone is signed in and after a few seconds the two interlocked rings
are displayed indicating that the phone is paired with the PC BToE application.
93
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
Note that the phone's IP address may change during the registration process.
8.13.2 Making a Call (Click-to-Dial)
You can make a call from the PC Skype for Windows client or from the phone; in both cases, the
one operation mirrors the other, providing an enhanced unified communications experience and
optimizing enterprise efficiency.
To make a call:
1.
In the PC Skype for Windows client, click the digit keys of the person's number to call.
Alternatively, you can call them from Outlook; the phone's user interface displays the
CALLING screen (shown below) while the PC Skype for Windows client simultaneously
displays the conversation screen.
2.
When the called party answers, you can use either your phone or PC Skype for Windows
client to talk, whichever is more convenient for you at the time. When BToE is paired, you
can use only the phone to talk; the client is used to control the call. To talk via the client, you
need to switch the primary device. You can use the phone's speakerphone, handset or
headphones.
8.13.3 Establishing a Unified Communications Call Conference
The phone supports multi-party Skype for Business remote conferencing. BToE is not mandatory
for conferencing - see Section 8.9 for more information about conferencing. BToE is mandatory
for unified communications conferencing. When BToE is installed, the phone's screen mirrors the
PC Skype for Business client; conferencing in the phone's screen then reflects conferencing in
the PC Skype for Business client.
The example below shows how BToE integrates phones with PC Skype for Business clients for
unified communications call conferencing.
In the PC Skype for Business client, Alan calls Steve.
Steve answers his phone.
User's Manual
94
Document #: LTRT-12044
User's Manual
8. Performing Advanced Operations
In his client, Alan clicks Invite More People and dials Hilary, who answers.
Hilary sees the call is a conference call initiated by Alan and that Steve has been invited:
Note:
• After making a call in the client, you can invite an unlimited number of other participants.
• You can use the phone's speakerphone, handset or headphones to continue the meeting.
• When a user whose phone is connected to BToE joins a meeting, their phone is muted
and the red MUTE button is lit. The user can unmute using the phone's MUTE button or
using the Skype for Windows client.
• You can press the phone's End softkey to end a meeting.
See Section 8.9 for more information about conferencing.
Version 3.0.1
95
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
8.13.4 Answering a Call
You can answer an incoming call on the Skype for Windows client or phone, whichever is more
convenient for you at the time, providing an enhanced unified communications experience and
optimizing enterprise efficiency.
When answering an incoming video call with a paired phone, the call is established. The default
device is the PC speaker/microphone rather than the phone. Subsequent audio calls will be
unaffected; the paired phone will still be the default device.
To answer a call on the phone:
1.
When the INCOMING CALL screen is displayed in the phone's user interface, press the
Accept softkey; the call is answered.
2.
You can end the call by pressing the End softkey.
User's Manual
96
Document #: LTRT-12044
User's Manual
8. Performing Advanced Operations
8.13.5 Transferring a Call
You can transfer a call to another party either from your PC Skype for Windows client or phone,
whichever is more convenient for you at the time, for an enhanced unified communications
experience.
To transfer a call:
1.
From your PC Skype for Windows client or phone, make a call; calling is indicated on both
PC Skype for Windows client and phone.
2.
When the called party answers, you can perform either a consultative transfer or nonconsultative (blind) transfer.
•
From your phone user interface, press the
transfer as follows:
softkey and perform a non-consultative
-OR- perform a consultative transfer as follows:
•
Version 3.0.1
From your PC Skype for Windows client you can also perform a consultative transfer or
non-consultative (blind) transfer. The operation is mirrored in your phone.
97
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
8.14
Switching Primary Audio Device
BToE lets you switch primary audio device, so you can switch from listening to a Skype for
Business conversation through the phone handset, for example, to listening on a headset, or from
listening on a headset to listening through the phone speaker.
To determine which audio device is currently primary:
Locate in the lowermost left corner of the Skype for Business client screen the icon indicating
'Primary Device'.
Figure 8-27: Primary Device: Phone
Figure 8-28: Primary Device: Speaker
Figure 8-29: Primary Device: Headset
To switch primary device:
In a Skype for Business call, click the Call Control icon and select Devices.
User's Manual
98
Document #: LTRT-12044
User's Manual
8.15
8. Performing Advanced Operations
Routing Voice from a Video Call to the Phone
When a video call comes in, video is displayed in the PC/laptop based Skype for Business client.
The user can route the voice from the video call to the phone. In this scenario, the phone
performs similarly to a USB device.
The example below illustrates how Ami Lahav, who's in a video call with Yaron Moshkovitz,
routes voice to the phone.
Version 3.0.1
99
405HD IP Phone for Microsoft Skype for Business
405HD IP Phone for Microsoft Skype for Business
8.16
Viewing and Playing Voicemail Messages
New messages will be in your voicemail box if:
The Ring LED on the front of the phone is permanently lit blue (see Figure 2-1, label 1).
An envelope icon is displayed in the phone's screen.
A stutter dial tone is heard when you pick up the handset.
To view a list of your voicemail messages:
1.
Press the voicemail key:
2.
Press the All softkey and wait for the list to update.
3.
Scroll to select from the list which message to Play, Call or Delete.
Note:
For this feature to function:
• Your network administrator must enable private voicemail for you.
You must sign in to the phone with your username and password. If you signed in with
your PIN code, voicemail will be unavailable and you'll see the message Your account is
not configured for Exchange Unified Messaging.
• Features like this, activated from Microsoft's Exchange Server, are only available after
signing in to the phone with username and password.
• By default, the phone skips PIN code authentication and allows users direct access to
voicemail. The network administrators can secure user access to voicemail with PIN code
authentication so that when the user presses the voicemail key, they're prompted to enter
their PIN code. See the Administrator's Manual for details.
When you have at least one new message in your voicemail box, you can listen to it.
8.16.1 Sending an Incoming Call Directly to Voicemail
If a time constraint, for example, prevents you from answering an incoming call, you can sent it
directly to voicemail.
To send an incoming call directly to voicemail:
Press the To VM softkey displayed when the phone rings.
User's Manual
100
Document #: LTRT-12044
User's Manual
9
9. Troubleshooting
Troubleshooting
Read this section if a problem with your phone occurs. If this does not help resolve the issue,
contact your system administrator.
Table 9-1: Troubleshooting
Symptom
Problem
Corrective Procedure
Phone is off
(no screen displays
and LEDs)
Phone is not
receiving power
Verify that the AC/DC power adapter is attached
firmly to the DC input on the rear of the phone.
Verify that the AC/DC power adapter is plugged into
the electrical outlet.
Verify that the electrical outlet is functional.
If using Power over Ethernet (PoE), contact your
system administrator to check that the switch is
supplying power to the phone.
'LAN Link Failure'
message displayed
on the screen
No LAN
connection
Verify that the LAN cable is connected securely to
the LAN port on the rear of the phone.
Verify that the other end of the LAN cable is
connected to the network (switch). If it's not, inform
your system administrator.
Increase the volume (see Section 6.12.1)
Phone is not ringing Ring volume is set
too low
9.1
Screen display is
poor
Screen settings
Headset has no
audio
Headset not
connected
properly
Adjust the phone’s screen contrast level (see
Section 6.7)
Adjust the screen’s backlight timeout (see
Section 6.8)
Verify that your headset is securely plugged into the
headset port located on the side of the phone.
Verify that the headset volume level is adjusted
adequately (see Section 6.12.5).
Uploading Logs to Microsoft Server for Support
Purposes
An integrated log upload feature allows network administrators to upload logs from the phone to
the Microsoft server for troubleshooting/support purposes, in compliance with Microsoft's
certification requirements for 3rd party Skype for Business clients.
If a user experiences an irregularity such as poor voice quality, they'll contact an AudioCodes
Field Application Engineer (FAE) who will instruct them to upload and send the logs for analysis.
The FAE then downloads the logs to their PC, performs the analysis, and provides a fix.
To perform log upload:
Press the MENU hard key on the phone and scroll down to select Log upload.
Version 3.0.1
101
405HD IP Phone for Microsoft Skype for Business
AudioCodes
HD VoIP
400HD Series of High Definition IP Phones
405HD IP Phone
User’s Manual
405HD IP Phone for Microsoft Skype for Business
Version 3.0.1
www.audiocodes.com
Download PDF

advertising