English
Türkçe
Русский
Português
EλληvIkά
Italiano
Español
Français
CASSETTE TYPE
OPERATING MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUAL DE FUNCIONAMIENTO
MANUALE DI ISTRUZIONI
ΕΓΧΕΙΡΙΔΙΟ ΛΕΙΤΟΥΡΓΙΑΣ
MANUAL DE FUNCIONAMENTO
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
KULLANIM KİTABI
Deutsch
AIR CONDITIONER
KEEP THIS MANUAL FOR FUTURE REFERENCE
BEWAHREN SIE DIESES HANDBUCH ZUM SPÄTEREN NACHSCHLAGEN AUF
CONSERVEZ CE MANUEL POUR RÉFÉRENCE ULTÉRIEURE
CONSERVE ESTE MANUAL PARA SU FUTURA CONSULTA
CONSERVARE IL PRESENTE MANUALE PER FUTURE CONSULTAZIONI
ΦΥΛΑΞΤΕ ΤΟ ΕΓΧΕΙΡΙΔΙΟ ΓΙΑ ΜΕΛΛΟΝΤΙΚΗ ΑΝΑΦΟΡΑ
GUARDE ESTE MANUAL PARA CONSULTA FUTURA
РУКОВОДСТВО ДЛЯ СПРАВОК В БУДУЩЕМ
BU KILAVUZU, DAHA SONRA BAŞVURMAK ÜZERE SAKLAYIN
9378589056-02_OM.indb 1
PART NO. 9378589056-02
2012/3/29 上午 11:09:48
CONTENTS
SAFETY PRECAUTIONS........................................ 2
FEATURES AND FUNCTIONS ............................... 3
NAME OF PARTS ................................................... 4
PREPARATORY OPERATION ................................ 6
OPERATION............................................................ 7
TIMER FUNCTIONS ............................................... 9
ON/OFF TIMER ....................................................... 9
WEEKLY TIMER .................................................... 10
TEMPERATURE SET BACK TIMER ..................... 12
ADJUSTING THE DIRECTION OF AIR
CIRCULATION ...................................................... 13
SWING OPERATION ............................................ 14
ECONOMY OPERATION ...................................... 14
CLEANING AND CARE ......................................... 15
TROUBLESHOOTING .......................................... 16
OPERATING TIPS................................................. 17
SELF-DIAGNOSIS ................................................ 19
SAFETY PRECAUTIONS
●
●
●
Before using the appliance, read these “SAFETY PRECAUTIONS” thoroughly and operate in the correct way.
The instructions in this section all relate to safety; be sure to maintain safe operating conditions.
“DANGER”, “WARNING” and “CAUTION” have the following meanings in these instructions:
DANGER
This mark indicates procedures which, if improperly performed, are most likely to
result in the death or serious injury to the user or service personnel.
WARNING
This mark indicates procedures which, if improperly performed, might lead to the
death or serious injury of the user or service personnel.
CAUTION
This mark indicates procedures which, if improperly performed, might possibly result
in personal harm to the user, or damage to property.
DANGER
CAUTION
Do not attempt to install this air conditioner by yourself.
This unit contains no user-serviceable parts. Always consult authorized service personnel for repairs.
● When moving, consult authorized service personnel for disconnection and installation
of the air conditioner.
● Do not become excessively chilled by staying for many hours in the direct cooling
airflow.
● Do not insert fingers or objects into the outlet port or intake grilles.
● Do not start and stop air conditioner operation by turning off the electrical breaker and so on.
● In the event of a malfunction (burning smell, etc.), immediately stop operation, turn off
the electrical breaker, and consult authorized service personnel.
● In the event of refrigerant leakage , be sure to keep away from fire or any flammables.
(consult an authorized service personnel)
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Provide occasional ventilation during use.
Do not direct air flow at fireplaces or heating apparatus.
Do not climb on, or place objects on, the air conditioner.
Do not hang objects from the indoor unit.
Do not set flower vases or water containers on top of air conditioners.
Do not expose the air conditioner directly to water.
Do not operate the air conditioner with wet hands.
Do not touch the switches with sharp objects.
Turn off power source when not using the unit for extended periods.
Always turn off the electrical breaker whenever cleaning the air conditioner or changing
the air filter.
Connection valves become hot during Heating; handle with care.
Check the condition of the installation stand for damage.
Do not place animals or plants in the direct path of the air flow.
When restarting after a long period of disuse in the winter, turn the power switch on at
least 12 hours before starting the unit.
Do not drink the water drained from the air conditioner.
Do not use in applications involving the storage of foods, plants or animals, precision
equipment, or art works.
Do not apply any heavy pressure to radiator fins.
Operate only with air filters installed.
Do not block or cover the intake grille and outlet port.
Ensure that any electronic equipment is at least 1m away from either the indoor or
outdoor units.
Avoid installing the air conditioner near a fireplace or other heating apparatus.
When installing the indoor and outdoor units, take precautions to prevent access by infants.
Do not use inflammable gases near the air conditioner.
En-2
9378589056-02_OM.indb 2
2012/3/29 上午 11:10:04
SAFETY PRECAUTIONS
CAUTION
●
●
●
●
●
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
If you see lightning or hear thunder, there might be a lightning strike. To prevent electric
shock hazard, turn off the air conditioner by using the remote controller, and do not
touch the unit or the power plug during thunderstorm.
Do not place any other electrical products or household belongings under indoor unit or
outdoor unit. Dripping condensation from the unit might get them wet, and may cause
damage or malfunction of your property.
Keep clean and tidy around the outdoor unit, and do not place the things around it. If it is
covered with fallen leaves, there could be an infiltration of small animals or insects whose
contact with the internal electrical components leads to the product malfunction.
Do not stand on unstable steps when operating or cleaning the air conditioner. It may
overturn and can cause the injury.
FEATURES AND FUNCTIONS
■ Energy saving and Comfortable function
INVERTER
At the start of operation, large amount of power is used to
bring the room quickly to the desired temperature. Afterwards,
the unit automatically switches to a low power setting for economic and comfortable operation.
ECONOMY OPERATION
When ECONOMY operation mode is operated, the room temperature will be little higher than the set-temp under cooling
mode and lower than set-temp under heating mode. Therefore,
the ECONOMY mode is able to save more energy than other
normal mode.
■ Clean function
REMOVABLE INTAKE GRILLE
The indoor unit’s intake grille can be removed for easy cleaning and maintenance.
MILDEW-RESISTANT FILTER
The air filter has been treated to resist mildew growth, thus allowing cleaner use and easier care.
■ Remote controller
WIRED REMOTE CONTROLLER
SUPER QUIET OPERATION
When the FAN button is used to select QUIET, the indoor unit
begins super quiet operation; the indoor unit’s airflow is reduced to produce quieter operation.
AUTO CHANGEOVER
The operation mode (cooling, dry, heating) is switched automatically to maintain the set temperature, and the temperature
is kept constant at all times.
■ Convenient function
WEEKLY TIMER
Use this timer function to set operating times for each day of
the week. Use the DAY OFF setting to switch off timed operation for a selected day in the coming week. Because all days
can be set together, the weekly timer can be used to repeat
the timer settings for all of the days.
TEMPERATURE SET BACK TIMER
Use this timer function to change the set temperature in the
operation times set for each day of the week. This can be used
together with other timer settings.
The wired remote controller allows convenient control of indoor
unit operation.
WIRELESS REMOTE CONTROLLER (OPTION)
The optional wireless remote controller can be used. When
you use remote controller, there are following different points
as compared with using wired remote controller.
[ The additional function for wireless ones ]
• SLEEP timer
• TIMER
• 10 °C HEAT operation
And you can use both wireless and wired remote controller simultaneously. (But function is limited.)
[ The restricted functions for wired ones ]
• Weekly timer
• Temperature set back timer
En-3
9378589056-02_OM.indb 3
2012/3/29 上午 11:10:05
NAME OF PARTS
Indoor unit
1
2
3
4
5
6
7
Air filter (in air intake grille)
Airflow direction flaps
Air intake grille
Remote controller (wired)
Control panel (OPTION)
Remote control signal receiver
MANUAL AUTO button
When the MANUAL AUTO button
is pressed in for more than 10 seconds, the forced cooling operation
will start.
● The forced cooling operation is used
at the time of installation. Only for
authorized service personnel’s use.
● When the forced cooling operation
starts by any chance, press the
START/STOP button to stop the operation.
● Please press the button at Filter Reset.
●
2
1
5
3
4
8 OPERATION indicator lamp
(green)
9 TIMER indicator lamp (orange)
●
0 ECONOMY indicator lamp
(green)
WIRED TYPE
●
5
0
TIMER indicator lamp lights when
the timer is set from wireless remote
controller.
(OPTION)
A
ECONOMY indicator lamp lights in
following operations:
• ECONOMY operation
• 10 °C HEAT operation (controlled by
wireless remote controller)
A Remote controller (wireless)
9
8
7
6
Either the wireless or wired remote controller can be selected.
En-4
9378589056-02_OM.indb 4
2012/3/29 上午 11:10:05
NAME OF PARTS
Remote controller
1
2
3
4
5
6
7
8
9
0
A
B
START/STOP button
SET TEMP. (temperature) button
MODE button
FAN button
ECONOMY button
TIMER MODE (CLOCK ADJUST) button
DAY (DAY OFF) button
SET BACK button
SET TIME ( < > ) button
TIMER DELETE button
TIMER SET button
Vertical airflow direction and
Swing button
C Horizontal airflow direction and
Swing button*1
D MAINTENANCE (FILTER RESET)
button#1
E Operation lamp
F Timer and Clock indicator
G Operation mode indicator
H Fan speed indicator
I Operation lock indicator
J Temperature indicator
K Function indicator
Defrost indicator
Thermo sensor indicator
ECONOMY indicator
Vertical swing indicator
Filter indicator#1
*1 This function cannot be used.
(Please also see the operating manual of the
option when using it with options, etc.)
#1 Can be used if set correctly during
installation. Please consult authorized service
personnel when using this function.
En-5
9378589056-02_OM.indb 5
2012/3/29 上午 11:10:08
PREPARATORY OPERATION
Set the current day and time
1
2
Press the TIMER MODE (CLOCK
ADJUST) button for 2 seconds or
more. The time indicator on the
remote controller will flash.
3
Press the DAY button and select the current day.
A
appears around the selected day.
SU
MO
TU
WE
TH
FR
SA
Press the SET TIME (< >) buttons to set the current time.
Press repeatedly to adjust the current time in 1-minute increments. Press and hold to adjust the current time in 10-minute
increments.
SU MO TU WE TH FR SA
ex. Monday PM11:00
4
SET BACK
SU MO TU WE TH FR SA
Press the SET BACK button to switch between the
12- and 24-hour time displays.
SU MO TU WE TH FR SA
5
Press again to end.
En-6
9378589056-02_OM.indb 6
2012/3/29 上午 11:10:09
OPERATION
Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).
To start/stop operation
Press the START/STOP button.
Operation lamp
Air conditioner ON: Lit brightly
Air conditioner OFF: Not lit
To set the operation mode
●
Operation mode setting
Press the MODE button to set the operation mode.
If DRY is selected, the fan speed will be set to AUTO.
AUTO
●
Room temperature setting
Lower
●
Rise
Fan speed setting
COOL
DRY
FAN
HEAT*
Press the SET TEMP. buttons to set the room temperature.
Temperature setting range
AUTO ............................................... 18 to 30 °C
COOL/DRY ...................................... 18 to 30 °C
HEAT* .............................................. 16 to 30 °C
Press the FAN button to set the fan speed.
AUTO
HIGH
MED
LOW
QUIET
ECONOMY operation
Press the ECONOMY button to start or stop ECONOMY operation.
For details on the function, refer to page 14.
En-7
9378589056-02_OM.indb 7
2012/3/29 上午 11:10:10
OPERATION
Room temperature sensor selection
•
This function is locked at the factory. In order to detect the room temperature correctly, consult authorized service personnel when using this function.
Indoor unit
Press the ECONOMY button for more than 2 seconds to select
whether the room temperature is detected at the indoor unit or
the remote controller.
When the
thermo sensor indicator appears, the room
temperature is detected at the remote controller.
NOTES
•
If this function is locked, the location where the room temperature is detected cannot be changed and the
when the ECONOMY button is pushed for 2 seconds or more.
mark flashes
Child lock function
Press the DAY (DAY OFF) button and TIMER SET button simultaneously for 2 seconds or more to activate the child lock function and lock all of the buttons on the remote controller except
the START/STOP button, SET TEMP. buttons, MODE button,
and FAN button. Press the buttons again for 2 seconds or more
to deactivate the child lock function.
When the child lock function is activated, the
mark appears. If any button is pressed during the child lock, the CL
indicator flashes.
En-8
9378589056-02_OM.indb 8
2012/3/29 上午 11:10:10
TIMER FUNCTIONS
OFF timer (See page 9.)
Use this timer function to stop air conditioner operation. The timer operates and air conditioner operation stops after the
set time has passed. The timer can be set up to 24 hours in advance.
ON timer (See page 9.)
Use this timer function to start air conditioner operation. The timer operates and air conditioner operation starts after the
set time has passed. The timer can be set up to 24 hours in advance.
WEEKLY timer (See page 10.)
Use this timer function to set operating times for each day of the week.
Use the DAY OFF setting to switch off timed operation for a selected day in the coming week.
Because all days can be set together, the weekly timer can be used to repeat the timer settings for all of the days.
Temperature SET BACK timer (See page 12.)
Use this timer function to change the set temperature in the operation times set for each day of the week.
This can be used together with other timer settings.
ON/OFF TIMER
To set the ON/OFF timer
1
Press the TIMER MODE button to
select the ON timer or OFF timer.
2
SU MO TU WE TH FR SA
From 1 to 24 hours
No indicator
NON
STOP
●
OFF
TIMER
ON
TIMER
WEEKLY
TIMER
ex. OFF timer set for 6 hours
Press the SET TIME (< >) buttons to set the time.
After the time is set, the timer will start automatically.
The amount of time until the OFF timer operates that is displayed
on the timer indicator decreases as time passes.
To cancel
• Press the TIMER DELETE button to cancel the timer mode.
• The timer mode can also be canceled by changing the timer mode using the TIMER MODE button.
En-9
9378589056-02_OM.indb 9
2012/3/29 上午 11:10:11
WEEKLY TIMER
Weekly timer setting
1
2
Press the TIMER SET button for
2 seconds or more.
Press the TIMER MODE button to select the weekly timer.
3
●
Day of the week setting
ALL
SU
MO
TU
WE
TH
FR
SA
2
1
Press the DAY button to select the day of the week, and then press the TIMER
SET button to confirm the setting.
For ALL, all of the days can be set together when a
appears around
each day.
4
●
Time setting
When the operating time is set, the
mark appears.
1
ON-1
OFF-1
3
2
ON-2
OFF-2
ex. The timer is set for 7:00-18:00.
Press the SET TIME (< >) buttons to set the time, and then press the TIMER SET
button to confirm the setting and proceed to the next ON or OFF time setting.
Up to 2 times ON and OFF times can be set per day.
Press the DAY button to complete the time setting and return to the day of the week
setting.
5
●
To delete the operating time
If the TIMER DELETE button is pressed dur-
3 4
ing steps or , the operating time for the
selected day will be deleted.
If all the days are selected, the operating
times for all of the days will be deleted.
3
4
Repeat steps and .
To complete the weekly timer settings, press the TIMER
SET button for 2 seconds or more.
NOTES
• The operating time can be set in 30-minute increments only.
• The OFF time can be carried over to the next day.
• The ON timer and the OFF timer functions cannot be set using the weekly timer. Both an ON and OFF time must be set.
En-10
9378589056-02_OM.indb 10
2012/3/29 上午 11:10:12
WEEKLY TIMER
WEEKLY timer operation
●
To start
●
When the weekly timer is selected, the
timer starts automatically.
To cancel
• Press the TIMER DELETE button to
cancel the timer mode.
• The timer mode can also be
canceled by changing the timer
mode using the TIMER MODE
button.
ex. Operating time 7:00-18:00
The operating time for the current day
is displayed.
To set the DAY OFF (for a holiday)
1
2
3
4
During the weekly timer, press
the TIMER SET button for 2
seconds or more to set the
day.
Select the day to set the DAY
OFF.
Press the DAY (DAY OFF)
button for 2 seconds or more
to set the DAY OFF.
Press the TIMER SET button
for 2 seconds or more to complete the DAY OFF setting.
SU MO TU WE TH FR SA
SU MO TU WE TH FR SA
The
mark flashes under a day of the week.
●
3 6 9 12 15 18 21
3 6 9 12 15 18 21
ex. The DAY OFF is set for Monday.
To cancel
Follow the same procedures as those
for setup.
NOTES
• The DAY OFF setting is only available for days for which weekly settings already exist.
• If the operating time carries over to the next day (during a next day setting), the effective DAY OFF range will be set as shown
below.
●
Normal
●
Next day setting
DAY OFF
ON
OFF
WEEKLY
Preceding day
ON
DAY OFF
OFF
OFF
ON
WEEKLY
WEEKLY
Setting day
Next day
Preceding day
OFF
ON
WEEKLY
Setting day
Next day
• The DAY OFF setting can only be set 1 time. The DAY OFF setting is cancelled automatically after the set day has passed.
En-11
9378589056-02_OM.indb 11
2012/3/29 上午 11:10:13
TEMPERATURE SET BACK TIMER
Temperature SET BACK timer setting
1
SET BACK
2
If there is no existing
SET BACK temperature setting, “- -” will
be displayed for the
temperature.
Press the TIMER SET button
for 2 seconds or more.
Press the SET BACK button to change to the SET BACK confirmation display.
The SET BACK operating time and the set temperature will be
displayed.
3
●
Day setting
1
●
Operating time setting
2
4
3
ex. When setting all days together
Follow the same procedures to set the operating time as those for the weekly timer. The TIMER DELETE button is also used
as described in the procedures for the weekly timer.
4
●
Temperature setting
Press the SET TEMP. buttons to set the
temperature. (The temperature setting range
is the same as the range for the operation
mode.)
5
3
ex. Operating time 15:00–22:00
ON
SET BACK temperature
Normal temperature
28°C
24°C
4
Repeat steps and .
Press the TIMER SET button for
2 seconds or more to complete
the temperature SET BACK timer
settings.
OFF
24°C
Temperature SET BACK timer operation
●
To start
●
To cancel
SET BACK
1
ex. Display during SET BACK timer operation
(The operating time will not be displayed.)
Press the SET BACK button. The SET BACK confirmation display appears for
5 seconds, and then the timer starts automatically.
2
Press the SET BACK button, and then
press the TIMER DELETE button while
the SET BACK confirmation display is
displayed. Even if the SET BACK button
is pressed again, the SET BACK timer
will be cancelled.
NOTES
•
•
•
•
The SET BACK timer only changes the set temperature, it cannot be used to start or stop air conditioner operation.
The SET BACK timer can be set to operate up to 2 times per day but only 1 temperature setting can be used.
The SET BACK timer can be used together with the ON, OFF, and weekly timer functions.
The SET BACK operating time is displayed only in the SET BACK confirmation display. (Refer to step 1 for the SET BACK
confirmation display.)
En-12
9378589056-02_OM.indb 12
2012/3/29 上午 11:10:14
ADJUSTING THE DIRECTION OF AIR CIRCULATION
Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).
Start air conditioner operation before performing this procedure.
To set the operation mode
●
Vertical air direction adjustment
Press the START/STOP button to start the air conditioner, and then proceed as follows.
Press the vertical airflow direction and swing button to adjust the direction of
the vertical airflow.
Each time the button is pressed, the air direction range will change as follows:
1
2
3
4
The remote controller display does not change.
● Attempting to move up/down air di-
Recommended airflow direction setting:
1, 2, 3, 4: During cooling/dry mode
2, 3, 4:
During heating mode
rection flaps manually could result in
improper operation; in this case, stop
operation and restart. The louvers
should begin to operate properly
again.
● When used in a room with infants,
children, elderly or sick persons, the
air direction and room temperature
should be considered carefully when
making settings.
●
The vertical airflow direction is set automatically as shown, in accordance with the
type of operation selected.
During cooling/dry mode
: Horizontal flow 1
During heating mode*
: Downward flow 4
●
During AUTO mode operation, for the first minute after beginning operation, airflow
will be horizontal 1; the air direction cannot be adjusted during this period.
●
Horizontal air direction adjustment.
The function cannot be used.
En-13
9378589056-02_OM.indb 13
2012/3/29 上午 11:10:15
SWING OPERATION
Begin air conditioner operation before performing this procedure.
To select/stop swing operation
Press the vertical airflow direction and swing button for more than 2 seconds.
(Stop the setting by pressing for more than 2 seconds again.)
About Swing Operation
The type of operation
Cooling/Heating/Dry/Fan
Range of swing
1 to 4
●
The swing operation may stop temporarily when the air conditioner’s fan is not operating, or when operating at very low
speeds.
ECONOMY OPERATION
Begin air conditioner operation before performing this procedure.
To Use the ECONOMY Operation
Press the ECONOMY button.
The ECONOMY indicator will light.
ECONOMY operation begins.
To Stop the ECONOMY Operation
Press the ECONOMY button again.
The ECONOMY indicator will go out.
Normal operation begins.
About ECONOMY Operation
At the maximum output, ECONOMY operation is approximately 70% of normal air conditioner operation for cooling and heating.
● If the room is not cooled (or heated) well during ECONOMY operation, select normal operation.
●
During the monitor period in the AUTO mode, the air conditioner operation will not change to ECONOMY operation even if
ECONOMY operation is selected by pressing the ECONOMY operation button.
●
When ECONOMY operation mode is operated, the room temperature will be little higher than the set-temp under cooling mode
and lower than set-temp under heating mode. Therefore, the ECONOMY mode is able to save more energy than other normal
mode.
●
In case of multi-type air conditioner, the ECONOMY operation mode is only available for the set indoor unit.
En-14
9378589056-02_OM.indb 14
2012/3/29 上午 11:10:16
CLEANING AND CARE
CAUTION
●
Before cleaning the unit, be sure to stop the unit and disconnect the power supply.
●
Turn off the electrical breaker.
●
A fan operates at high speed inside the unit, and personal injury could result.
●
Be careful not to drop the intake grille.
●
As the filter cleaning involves high-altitude operation, please consult the professional technical service
personnel.
●
When used for extended periods, the unit may accumulate dirt inside, reducing its performance. We recommend that the unit be
inspected regularly, in addition to your own cleaning and care. For more information, consult authorized service personnel.
●
When cleaning the unit’s body, do not use water hotter than 40 °C, harsh abrasive cleansers, or volatile agents like benzene or
thinner.
●
Do not expose the unit body to liquid insecticides or hairsprays.
●
If the unit will not be operated for a period of one month or more, be sure to allow the inner parts of the unit to dry thoroughly, in
advance, by operating the unit in fan mode for half a day.
Cleaning the Air Filter
1. Push the intake grille’s hooks inward towards the center of the unit to open the
intake grille.
4. Re-attach the air filters to the intake grille.
1 Replace the air filter into its holder.
2 Make sure that the air filter makes contact with the filter
stopper when it is replaced into its holder.
2. Pull out the filter from the intake grille.
5. Close the intake grille and push the intake
grille’s hooks outward.
3. Clean the air filter.
Remove the dust from the air filters by vacuuming or washing
them. After washing, allow the air filters to dry thoroughly in
an area protected from sunlight.
● Dust can be cleaned from the air filter either with a vacuum
cleaner, or by washing the filter in a solution of mild detergent and warm water. If you wash the filter, be sure to allow
it to dry thoroughly in a shady place before reinstalling.
●
If dirt is allowed to accumulate on the air filter, air flow will
be reduced, lowering operating efficiency and increasing
noise.
Filter indicator Reset (A special setting)
●
Can be used if set correctly during installation. Please consult authorized service personnel when using this function.
• It lights on when it is time to clean the air filters.
After turning the power on.
Press the MAINTENANCE button for 2 seconds or
more on the remote control.
The filter indicator will disappear.
En-15
9378589056-02_OM.indb 15
2012/3/29 上午 11:10:16
TROUBLESHOOTING
Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).
WARNING
In the event of a malfunction (burning smell, etc.), immediately stop operation, turn off the electrical
breaker, and consult authorized service personnel.
Merely turning off the unit’s power switch will not completely disconnect the unit from the power source.
Always be sure to turn off the electrical breaker to ensure that power is completely off.
Before requesting service, perform the following checks:
Symptom
NORMAL
FUNCTION
Does not operate immediately:
Noise is heard:
Problem
If the unit is stopped and then immediately started again, the compressor will not operate for about 3 minutes, in order to prevent
fuse blowouts.
● Whenever the electrical breaker is turned off then on again, the
protection circuit will operate for about 3 minutes, preventing unit
operation during that period.
—
During operation and immediately after stopping the unit, the sound
of water flowing in the air conditioner’s piping may be heard. Also,
noise may be particularly noticeable for about 2 to 3 minutes after
starting operation (sound of coolant flowing).
● During operation, a slight squeaking sound may be heard. This is
the result of minute expansion and contraction of the front cover due
to temperature changes.
—
●
●
* ● During heating operation, a sizzling sound may be heard
occasionally. This sound is produced by the automatic defrosting
operation.
Smells:
Mist or steam are emitted:
Airflow is weak or stops:
Water is produced from the
outdoor unit:
See Page
17
●
Some smell may be emitted from the indoor unit. This smell is the
result of room smells (furniture, tobacco, etc.) which have been
taken into the air conditioner.
—
●
During cooling or dry operation, a thin mist may be seen emitted
from the indoor unit. This results from the sudden cooling of room air
by the air emitted from the air conditioner, resulting in condensation
and misting.
—
* ● During heating operation, the outdoor unit’s fan may stop, and
steam may be seen rising from the unit. This is due to the automatic
defrosting operation.
17
* ● When heating operation is started, fan speed is temporarily very low,
to allow internal parts to warm up.
* ● During heating operation, if the room temperature rises above the
thermostat setting, the outdoor unit will stop, and the indoor unit will
operate at very low fan speed. If you wish to warm the room further,
set the thermostat to a higher setting.
—
* ● During heating operation, the unit will temporarily stop operation
(between 4 and 15 minutes) as the automatic defrosting mode operates. During the automatic defrosting operation,
will be shown
on the remote controller display.
17
●
The fan may operate at very low speed during dry operation or when
the unit is monitoring the room’s temperature.
—
●
During QUIET operation, the fan will operate at very low speed.
—
●
In the monitor AUTO operation, the fan will operate at very low
speed.
—
* ● During heating operation, water may be produced from the outdoor
unit due to the automatic defrosting operation.
17
The FILTER indicator
blinks:
●
Clean the filter. Afterwards, turn the FILTER indicator off.
thermo sensor indicator
on the remote controller is
flashing:
●
The room temperature sensor may be malfunctioning. Please consult authorized service personnel.
15
—
En-16
9378589056-02_OM.indb 16
2012/3/29 上午 11:10:18
TROUBLESHOOTING
Symptom
CHECK ONCE Does not operate at all:
MORE
Poor cooling (or heating*)
performance:
Items to check
●
●
●
Has the circuit breaker been turned off?
Has there been a power failure?
Has a fuse blown out, or a circuit breaker been tripped?
●
Is the timer operating?
●
Is the air filter dirty?
●
Are the air conditioner’s intake grille or outlet port blocked?
●
Did you adjust the room temperature settings (thermostat) correctly?
●
Is there a window or door open?
●
In the case of cooling operation, is a window allowing bright sunlight to enter? (close the curtains.)
●
In the case of cooling operation, are there heating apparatus and
computers inside the room, or are there too many people in the
room?
●
Is the unit set for QUIET operation?
See Page
—
9 to 11
—
—
If the problem persists after performing these checks, or if you notice burning smells, stop operation immediately, disconnect the
power supply, and consult with authorized service personnel.
OPERATING TIPS
Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).
Heating Performance*
This air conditioner operates on the heat-pump principle,
absorbing heat from outdoor air and transferring that heat
indoors. As a result, the operating performance is reduced
as outdoor air temperature drops. If you feel that insufficient
heating performance is being produced, we recommend you
use this air conditioner in conjunction with another kind of
heating appliance.
● Heat-pump air conditioners heat your entire room by recirculating air throughout the room, with the result that some time
may be required after first starting the air conditioner until the
room is heated.
●
When Indoor and Outdoor Temperature
are High*
When both indoor and outdoor temperatures are high during use
of the heating mode, the outdoor unit’s fan may stop at times.
Fan speed: AUTO
Heating* : The fan will operate at very low speed when the temperature of the air issued from the indoor unit is low.
Cooling : As the room temperature approaches that of the set
temperature, the fan speed becomes slower.
Fan
: The fan runs at the low fan speed.
Microcomputer-controlled Automatic
Defrosting*
●
●
After heating operation stops, if frost forms on the outdoor
unit, the unit will start automatic defrosting operation. At this
time, the outdoor unit will automatically stop after operating
for a few minutes.
Low Ambient Cooling
When the outdoor temperature drops, the outdoor unit’s fans may
switch to low speed, or one of the fans may stop intermittently.
Hot Start*
The indoor unit prevents cold drafts when heating operation
begins.
The indoor unit fan will not operate or it will operate at a very low
speed until the heat exchanger reaches the set temperature.
Dual Remote Controllers (optional)
An additional remote controller can be added up to the maximum
of two remote controllers. Either remote controller can control
the air conditioner. However, the timer functions cannot be used
at the slave unit.
Group Control
One remote controller can control up to 16 air conditioners.
All of the air conditioners will be operated with the same settings.
When using the heating mode under conditions of low outdoor
temperature and high humidity, frost may form on the outdoor
unit, resulting in reduced operating performance.
In order to prevent this kind of reduced performance, this
unit is equipped with a microcomputer-controlled automatic
defrosting function. During the defrost cycle, the indoor fan will
shutdown and
will be displayed on the remote controller. It will take anywhere from 4 to 15 minutes before the air
conditioner starts up again.
En-17
9378589056-02_OM.indb 17
2012/3/29 上午 11:10:20
OPERATING TIPS
Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).
Mode operation
AUTO (in COOLING model):
●
When AUTO (automatic changeover) operation first selected, the fan will operate at very low speed for about a few
minutes, during which time the indoor unit detects the room conditions and
selects the proper mode.
Cooling mode
Room temperature is higher than the defined temperature in temperature setting Defined
 Cooling mode or dry mode
temperature in
temperature
Room temperature is close to or lower than the defined temperature in tem- setting
perature setting  Monitor operation
or Dry mode
Monitor operation
●
When the indoor unit has adjusted your room’s temperature to near the temperature setting, it will begin monitor operation. In the monitor operation mode, the fan will operate at low speed. If the
room temperature subsequently changes, the indoor unit will once again select the appropriate operation (cooling) to
adjust the temperature to the value set in the temperature setting.
●
If the mode automatically selected by the unit is not what you wish, select one of the mode operation (COOL, DRY,
FAN).
AUTO [in HEAT & COOL (Reverse Cycle) model]:
●
When AUTO (automatic changeover) is selected, the air conditioner selects the appropriate operation mode (cooling
or heating) according to your room’s present temperature.
●
When AUTO (automatic changeover) operation first selected, the fan will operate at low speed for about a few minute,
during which time the indoor unit detects the room conditions and selects the proper operation mode.
Room temperature is higher than the defined temperature in temperature
setting → Cooling mode or dry mode
Room temperature is close to the defined temperature in temperature setting
→ Determined by outdoor temperature
Room temperature is lower than the defined temperature in temperature
setting → Heating mode
HEAT*:
Determined by
outdoor temperature
Heating
●
When the air conditioner has adjusted your room’s temperature to near the
thermostat setting, it will begin monitor operation. In the monitor operation mode, the fan will operate at low speed. If the
room temperature subsequently changes, the air conditioner will once again select the appropriate operation (heating,
cooling) to adjust the temperature to the value set in the thermostat.
●
If the mode automatically selected by the unit is not what you wish, select one of the mode operation (HEAT, COOL,
DRY, FAN).
●
Use to warm your room.
When heating mode is selected, the air conditioner will operate at very low
fan speed for about 3 to 5 minutes, after which it will switch to the selected
fan setting. This period of time is provided to allow the indoor unit to warm
up before beginning full operation.
When the room temperature is very low, frost may form on the outside unit,
and its performance may be reduced. In order to remove such frost, the unit
will automatically enter the defrost cycle from time to time. During automatic
defrosting operation, the heat operation will be interrupted.
After the start of heating operation, it takes sometime before the room gets
warmer.
Use to cool your room.
Use for gently cooling while dehumidifying your room.
You cannot heat the room during dry mode.
During dry mode, the unit will operate at low speed; in order to adjust room
humidity, the indoor unit’s fan may stop from time to time. Also, the fan may
operate at very low speed when adjusting room humidity.
The fan speed cannot be changed manually when dry mode has been selected.
●
●
●
COOL: ●
●
DRY:
●
●
●
FAN:
Cooling or Dry
Defined
temperature in
temperature
setting
●
During heating mode:
Set the thermostat to a temperature setting
that is higher than the current room temperature. The heating mode will not operate
if the thermostat is set lower than the actual
room temperature.
During cooling/dry mode:
Set the thermostat to a temperature setting
that is lower than the current room temperature. The cooling and dry modes will
not operate if the thermostat is set higher
than the actual room temperature (in cooling
mode, the fan alone will operate).
During fan mode:
You can not use the unit to heat and cool
your room.
Use to circulate the air throughout your room.
En-18
9378589056-02_OM.indb 18
2012/3/29 上午 11:10:21
OPERATING TIPS
AUTO Restart
In Event of Power Interruption
●
Should the power supply to the air conditioner be interrupted
by a power failure, the air conditioner will restart automatically
in the previously selected mode once the power is restored.
●
Use of other electrical appliances (electric shaver, etc.) or
nearby use of a wireless radio transmitter may cause the air
conditioner to malfunction. In this event, temporarily disconnect the power supply, reconnect it, and then use the remote
controller to resume operation.
Notices
* ● During use of the heating mode, the outdoor unit will occasionally commence the defrost operation for brief periods.
During the defrosting operation, if the user sets the indoor unit
for heating again, the defrosting mode will continue, and the
heating operation will begin after completion of defrosting, with
the result that some time may be required before warm air is
emitted.
* ● During use of the heating mode, the top of the indoor unit
may become warm, but this is due to the fact that coolant is
circulated through the indoor unit even when it is stopped; it
is not a malfunction.
SELF-DIAGNOSIS
When “Er” in temperature indicator is displayed, inspection of the air conditioning system is necessary. Please consult authorized
service personnel.
Unit number (usually “00”)
Error code
ex. Self-diagnosis check
En-19
9378589056-02_OM.indb 19
2012/3/29 上午 11:10:21
Download PDF