BT8432 INSTALLATION LEAFLET PAGE 1.dft

BT8432
LARGE FLAT SCREEN WALL MOUNT WITH TILT
INSTALLATION GUIDE & PARTS LIST
This Pack Contains 1 Mount
PLEASE KEEP THIS FOR FUTURE REFERENCE
FEATURES
●
Designed for flat screens up to 65” (165cm) / 70kg (154lbs)
●
Suitable for VESA & Non-VESA flat screens
●
Mounts screen only 80mm (3.1”) from the wall
●
Features Torsion Tilt mechanism for +/- 15° tilt
●
Suitable for concrete / brick or stud walls up to 32” (81cm)
●
Includes locking bar for secure installation
●
Simple hook-on installation with all mounting
hardware included
COMMUNITY DESIGN NO. 001713280-0036
REG DESIGN NO: 3021714
PATENT APPLICATION NO: 0817023.5
CONTENTS
Installation Safety Notes.....................................................................................................................2
Parts List.............................................................................................................................................4
Installation Instructions.......................................................................................................................6
Optional Accessories.........................................................................................................................10
Product Dimensions..........................................................................................................................11
B-Tech Contact Details.....................................................................................................................12
TOOLS REQUIRED
13mm (1/2") spanner Crosshead
or socket
screwdriver
Drill
10mm (7/16")
masonry bit or
6mm (1/4") wood bit
Pencil
Stud finder
Level
(optional) (optional)
B-TECH AUDIO VIDEO MOUNTS
www.btechavmounts.com
INSTALLATION SAFETY INSTRUCTIONS
CAUTION: This wall mount is intended for use only with the maximum weights
indicated. Use with flat screen heavier than the maximum indicated may result
in instability causing possible injury.
Do not attempt to install this product until all instructions and warnings have been read and
properly understood. Please keep these instructions for future reference.
B-Tech International Limited, its distributors and dealers are not liable or responsible for
damage or injury caused by improper installation, improper use or failure to observe these
safety instructions. In such cases, all guarantees will expire.
General
B-Tech International Ltd recommends that a professional AV installer or other suitably qualified
person install this product. Great care must always be taken during installation as most AV
equipment is of a fragile nature, possibly heavy and easily damaged if dropped.
If you do not fully understand the instructions or are not sure how to install this product safely,
then please consult a professional for advice and/or to install this product for you. Failure to
mount this product correctly may cause serious injury or death both during installation and at
any time thereafter.
Do not mount any AV equipment that exceeds the specific weight limit of the product you are
installing. This weight limit will be clearly stated on each product and its packaging and will
vary from product to product.
Product location
Please pay careful attention to where this product is located. Some walls are not suitable for
installation.
If located in a public or frequently populated area ensure that the product is out of the
immediate reach of people. If any AV equipment is to be suspended over the likely path or
location of people then great care should be taken to secure all parts of the installation from
falling.
If you install this product on drywall it must be securely fixed to a wooden stud, concrete block
or other permanent structure behind the drywall board. Installing on drywall boards alone will
not support the weight of most AV equipment.
When drilling holes in walls it is essential to avoid contact with electrical cables and water or
gas pipes contained within. Use of a good quality live wire detector and hidden object locator is
therefore recommended. Only drill into structures when you are sure it is safe to do so.
Fixing hardware
It is highly recommended that all wall fixing screws be used where supplied and that the
purpose of all other fixing hardware is fully understood. In some cases more AV equipment
fixing hardware will be supplied to accommodate different models of equipment and set up
configurations.
The installer must be satisfied that any supplied fixing hardware is suitable for each specific
installation. If any fixing screws or included hardware are deemed not sufficient for a safe
installation then please consult a professional or your local hardware store.
Hazard limitation
2
When routing cables take advantage of any built in cable management features that the
product might provide and ensure that all cables are tidy and secure. Check to see that any
moving aspect of the product can do so unhindered by any cabling.
Some products have moving parts and the potential to cause injury through the crushing or
trapping of fingers or other body parts.
Particular attention to the nature of moving parts is required especially when assembling
installing and adjusting during set up.
Immediately after installations double-check that the work done is safe and secure. Doublecheck all necessary fixings are present and are of ample tightness.
It is recommended that periodic inspections of the product and its fixing points are made as
frequently as possible to ensure that safety is maintained. If in doubt consult a professional AV
installer or other suitably qualified person.
CS
Společnost B-Tech International Ltd. doporučuje provést instalaci tohoto produktu prostřednictvím odborného
instalátora AV či jinak způsobilé osoby. Společnost B-Tech International Ltd, její distributoři a prodejci nenesou
odpovědnost za škody nebo zranění způsobená nevhodnou instalací. Tento výrobek je nutno umístit do vhodné
konstrukce a používat jen po uvedenou maximální výšku.
DE
B-Tech International Ltd. empfiehlt, dass dieses Produkt durch einen qualifizierten AV-Techniker oder eine
andere Person mit geeigneter Qualifikation installiert wird. B-Tech International Ltd, ihre Distributoren und
Händler können nicht für durch fehlerhafte Montage verursachte Beschädigung oder Verletzung haftbar bzw.
verantwortlich gemacht werden. Dieses Produkt muss auf eine geeignetem Untergrund montiert werden und darf
nur bis zum angegebenen Höchstgewicht verwendet werden.
ES
B-Tech International Ltd. recomienda que un instalador de audio y video profesional u otra persona debidamente
cualificada instalen este producto. B-Tech International Ltd, sus distribuidores y concesionarios no se hacen
cargo ni se responsabilizan de ningún daño o lesión provocados por una instalación inapropiada. Este producto
se debe montar en una estructura adecuada y se debe utilizar soportando solamente hasta el peso máximo
indicado.
FR
B-Tech International Ltd. recommande de confier l’installation de ce produit à un installateur AV professionnel ou
à une autre personne dûment qualifiée. B-Tech International Ltd, ses distributeurs et ses revendeurs ne
sauraient être tenus responsables de tout dégât ou de toute blessure résultant d’une installation incorrecte. Ce
produit doit être monté sur un support approprié et utilisé dans la limite du poids maximum indiqué.
IT
B-Tech International Ltd. consiglia di affidare l’installazione di questo prodotto a un installatore specializzato o ad
altra persona adeguatamente qualificata. B-Tech International Ltd, i suoi distributori e rivenditori non accettano
alcuna responsabilità nei riguardi di eventuali danni o infortuni causati da un’errata installazione. Questo prodotto
deve essere fissato a una struttura idonea e utilizzato unicamente sino al peso massimo indicato.
NL
B-Tech International Ltd. adviseert om dit product te laten installeren door een professionele AV-installateur of
andere hiervoor gekwalificeerde persoon. B-Tech International Ltd, haar distributeurs en dealers zijn niet
aansprakelijk of verantwoordelijk voor schade of letsel die is veroorzaakt door onoordeelkundige installatie. Dit
product moet worden gemonteerd aan een geschikte constructie, waarbij het aangegeven maximum gewicht niet
mag worden overschreden.
PL
Firma B-Tech International Ltd. zaleca, aby ten produkt był instalowany przez profesjonalnych instalatorów AV
lub inny odpowiednio przeszkolony personel. Firma B-Tech International Ltd, jej dystrybutorzy i dealerzy nie
ponoszą odpowiedzialności za uszkodzenia lub obrażenia ciała powstałe w wyniku nieprawidłowej instalacji.
Niniejszy produkt musi być zamontowany na odpowiedniej powierzchni, a podczas użytkowania nie wolno
przekraczać podanego maksymalnego obciążenia.
PT
A B-Tech International Ltd. recomenda que a instalação deste produto seja efectuada por um instalador de AV
profissional ou outra pessoa devidamente habilitada. A B-Tech International Ltd. e os seus distribuidores e
concessionários não são responsáveis por danos ou lesões causados por uma instalação incorrecta. Este
produto tem de ser montado numa estrutura adequada e utilizado somente até ao peso máximo indicado.
RU
Компания B-Tech International Ltd. рекомендует, чтобы установка данного изделия производилась
инженером по установке аудио-видеотехники или другим специалистом с соответствующей
квалификацией. Компания B-Tech International Ltd., ее дистрибьюторы и дилеры не несут ответственности
за повреждения или травмы, полученные в результате неправильной установки. Данное изделие должно
3
BT8432
PARTS LIST
6
Suitable for loads up
to 70kg (154lbs)
1
8
4
3
2
9
Wall Plate
5
10
7
10
12
10
11
13
4
Interface Assembly
A
B
No
M
D
C
E
F
PART NAME
QTY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
WALL PLATE
INTERFACE ARM A
INTERFACE ARM B
HOOK PLATE
24mm SPACER
LOCKING BAR (RIGHT)
LOCKING BAR (LEFT)
M4 x 16mm SCREW (FOR PARTS 6 & 7)
M8 NYLOC NUT
M8 PLASTIC WASHER
M8 METAL WASHER
TORSION TILT SPRING
M8 x 65mm PIN HEX SECURITY SCREW
5mm PIN HEX SECURITY KEY (FOR PART 13)
1
1
1
2
4
1
1
2
4
16
4
4
4
1
A
B
C
D
E
F
G
H
I
J
K
L
M
N
M4 x 12mm SCREW
M4 x 25mm SCREW
M5 x 16mm SCREW
M5 x 25mm SCREW
M6 x 16mm SCREW
M6 x 25mm SCREW
M8 x 16mm SCREW
M8 x 25mm SCREW
M8 x 40mm SCREW
12mm SPACER (FOR PARTS B, D & F)
13mm SPACER (FOR PART H)
24mm SPACER (FOR PART I)
M4 METAL WASHER (FOR PARTS A & B)
M6 METAL WASHER (FOR PARTS C, D, E & F)
A1
A2
M8 x 50mm COACH SCREW
M8 METAL WASHER (FOR PART A1)
6
6
A3
No. 10 WALL PLUG (FOR PART A1)
6
INTERFACE KIT
N
G
H
I
4
4
4
4
4
4
4
4
4
4
4
4
4
4
FIXING KIT
J
K
A1
A2
L
A3
14
PLEASE KEEP THIS FOR FUTURE REFERENCE
5
INSTALLATION INSTRUCTIONS
1
Attach wall plate to either a concrete or stud wall.
i. Concrete / brick wall
A3
1
A2
A1
10mm (7/16")
masonry bit
ii. Stud wall
32"
MAX
1
A2
A1
6mm (1/4")
wood bit
6
2
Attach interface arms to flat screen using interface kit.
A
B
D
C
M
E
F
G
H
I
N
J
K
L
TOP OF
SCREEN
FLAT SCREEN
TO
3
P
SCREW
2
OM
TT
O
B
WASHER
7
3
Hook flat screen onto wall mount (this may require 2 people).
4
WALL
FLAT SCREEN
1
2
Flat screen hooked
onto wall.
8
Lateral Adjustment
4
Insert locking bars and screws.
6
i) Locking bars
7
7
ii) Locking screws
OPTIONAL:
Secure with padlock
(not supplied)
7
8
HOLE
FOR
PADLOCK
(OPTIONAL)
9
5
Adjust the tilt by hand.
+/- 15
°
OPTIONAL ACCESSORIES
B-Tech AV Component Shelves & Cable Management.
BT7087
BT7070
BT7077
BT7078
10
BT7070
BT8432
PRODUCT DIMENSIONS
MAX
520mm
20.5"
500mm
19.7"
14mm
0.6"
15°
149mm
5.9"
MAX
825mm
32.5"
80mm
3.1"
WALL PLATE
840mm
33.1"
705mm
27.8"
570mm
22.4"
149mm
5.9"
252mm
9.9"
117mm
4.6"
15°
156mm
6.1"
24mm
0.9"
435mm
17.1"
300mm
11.8"
24mm
0.9"
865mm
34.1"
THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO
LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
14mm
0.6"
11
www.btechavmounts.com
B-TECH AUDIO VIDEO MOUNTS
HEAD OFFICE
Bennett House, Long March, Daventry, Northants NN11 4NR, UK
Email: info@btechavmounts.co.uk
EUROPE
Brixtonlaan 32, Zaventem 1930,
Brussels, Belgium
Email: info@btechproav.com
NORTH AMERICA
203 Eggert Road,
Buffalo, NY 14215, USA
Email: info@btechavmounts.com
SINGAPORE
Ruby Industrial Complex,
Singapore 347740
Email: info@btechavmounts.com.sg
©2010 Bennett Technologies Limited. All rights reserved.
B-Tech Audio Video Mounts is a division of Bennett Technologies Limited.
B-Tech, Better By Design, System 2 and Mountlogic are registered trademarks of Bennett Technologies Limited.
All other brands and product names are trademarks of their respective owners.
Photographs are for illustrative purposes only. E&OE.
IP-BT8432-V2.1-OR2BX-190810-03 MADE IN CHINA
ASIA PACIFIC
1503 Prosperity Millennia Plaza,
Quarry Bay, Hong Kong
Email: info@btechavmounts.com.hk