S Y S T E M S 1 Firmly grasp Flip Chart Holder and position in front of Traxx. Tilt top of Flip Chart Holder towards rail (Figure A). Figure A TRAXX ® Assembly Instructions Flip Chart Holder 2 3 4 5 Insert extrusion on back of Flip Chart Holder into center reveal of Traxx. Rotate bottom of Flip Chart Holder in towards rail. Press down on Flip Chart Holder, ensuring extrusion hooks onto lower channel of center reveal of Traxx (Figure B). Figure B Press firmly along length of Flip Chart Holder to secure in locked position (Figure C). Figure C Center Reveal Flipchart Holder To mount paper onto Flip Chart Holder, rotate bottom edge of holder cover upward to open position (Figure D). Figure D Reposition pegs to match holes in chart paper pad (Figure E). Figure E Note: If Flip Chart Holder is mounted Place chart paper pad over pegs. (Figure F). Figure F Package Contents Qty. • Flip Chart Holder 1 Peg to upper channel of Traxx, the antidislodgement feature will not engage and will prevent the Projection Screen or Marker Swivel Board from passing over the Flip Chart Holder. 6 Recommended Tools • None 7 Rotate holder cover downward to normal operating position (Figure G). Figure G Telephone 800.482.1818 Fax 812.482.8300 www.furniture.kimball.com Form #AISYTR005-00 #1469024 Printed in U.S.A © 2000 Kimball International, Inc. 1 Proper product installation, in accordance with these instructions, is the responsibility of the installing agent. If you have any questions concerning these instructions, please call Kimball Customer Care Teams.