68001K-MN - Eurohome Canada

68001K-MN
Ceramic glass induction hob
Table de cuisson vetrocéramique à induction
Glaskeramische inductie-kookplaat
Installation and Operating Instructions
Instructions de montage et mode d’emploi
Montage- en gebruiksaanwijzing
Dear Customer,
Please read these user instructions carefully and keep them to refer to
later.
Please pass the user instructions on to any future owner of the appliance.
1
3
2
2
The following symbols are used in the text:
Safety instructions
Warning! Information that affects your personal safety.
Important! Information that prevents damage to the appliance.
Useful tips and hints
Environmental information
Contents
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cooking surface layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Touch Control sensor fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
6
6
7
8
8
Operating the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching the appliance on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the heat setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching the STOP+GO function on and off. . . . . . . . . . . . . . . . . . . . . . . . .
Using the automatic warm-up function . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Locking/unlocking the control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the child safety device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching the power function on and off . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
9
9
9
10
11
12
13
14
17
Tips on Cooking and Frying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cookware for induction cooking zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tips on energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Examples of cooking applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18
18
19
20
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
98
3
Operating Instructions
1 Safety instructions
3
5
Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty.
This appliance conforms with the following EU Directives:
– 73/23/EEC dated 19.02.1973 Low Voltage Directive
– 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending
Directive 92/31/EEC
– 93/68/EEC dated 22.07.1993 CE Marking Directive
Correct use
• This appliance should be used only for normal domestic cooking and
frying of food.
• The appliance must not be used as a work surface or as a storage surface.
• Additions or modifications to the appliance are not permitted.
• Do not place or store flammable liquids, highly inflammable materials
or fusible objects (e.g. plastic film, plastic, aluminium) on or near the
appliance.
Children’s safety
• Small children must be kept away from the appliance.
• Only let bigger children work on the appliance under supervision.
• To avoid small children and pets unintentionally switching the appliance on, we recommend activation of the child safety device.
General safety
• The appliance may only be installed and connected by trained, registered service engineers.
• Built-in appliances may only be used after they have built in to suitable built-in units and work surfaces that meet standards.
• In the event of faults with the appliance or damage to the glass ceramic (cracks, scratches or splits), the appliance must be switched off
and disconnected from the electrical supply, to prevent the possibility
of an electric shock.
• Repairs to the appliance must only be carried out by trained registered service engineers.
4
Safety during use
• Remove stickers and film from the glass ceramic.
• There is the risk of burns from the appliance if used carelessly.
• Cables from electrical appliances must not touch the hot surface of
the appliance or hot cookware.
• Overheated fats and oils can ignite quickly. When cooking with fat or
oil (e.g. chips) do not leave the appliance unattended.
• Switch the cooking zones off after each use.
• Users with implanted pacemakers should keep their upper body at
least 30 cm from induction cooking zones that are switched on.
• Risk of burns! Do not place objects made of metal, such as knives,
forks, spoons and saucepan lids on the cooking surface, as they can
get hot.
Safety when cleaning
• For cleaning, the appliance must be switched off and cooled down.
• For safety reasons, the cleaning of the appliance with steam jet or
high-pressure cleaning equipment is not permitted.
How to avoid damage to the appliance
• The glass ceramic can be damaged by objects falling onto it.
• The edge of the glass ceramic can be damaged by being knocked by
the cookware.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the glass ceramic if pushed across the surface.
• Objects that melt and things that boil over can burn onto the glass
ceramic and should be removed straightaway.
• Do not use the cooking zones with empty cookware or without cookware.
• To avoid damaging cookware and glass ceramics, do not allow saucepans or frying pans to boil dry.
• The ventilation gap of 5mm between the worktop and front of the
unit underneath it must not be covered.
5
Description of the Appliance
Cooking surface layout
Induction cooking zone 1850 W
with power function 2500 W
Induction cooking zone 1400 W
with power function 1800 W
Induction cooking zone 2300 W Control panel
with power function 3700 W
Induction cooking zone 1850 W
with power function 2500 W
Control panel layout
Heat setting selection
Power function
Cooking zone indicators
Timer function
Timer display
On/Off
with power indicator
6
STOP+GO
Display
Timer
Lock
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions
are controlled by touching sensor fields and confirmed by displays and
acoustic signals.
Touch the sensor fields from above, without covering other sensor
fields.
Sensor field
1
Function
On / Off
To switch the appliance on and
off
Increase settings
Increasing heat setting/time
Decrease settings
Decreasing heat setting/time
Timer
Timer selection
Lock
Locking/unlocking the control
panel
Power
Switching the power function on
and off
Stop+Go
To switch the Keep Warm setting
on/off
Warning! Risk of burns from heat emitted. Lengthy cooking on higher
settings with larger cookware on the front cooking zones can heat the
sensor fields. Take care when touching sensor fields.
7
Displays
Display
Description
Cooking zone is switched off
Keep warm setting
Keep warm setting/STOP+GO
function is set
-
Heat settings
Heat setting is set
-
Heating setting plus
decimal point
Intermediate heat setting is set
Automatic warm up
function
Automatic warm-up function is
activated
Fault
Malfunction has occurred
Pan detection
Cookware is unsuitable or too
small or no cookware has been
placed on the cooking zone
Residual heat
Cooking zone is still hot
Child safety device
Lock/child safety device is engaged
Power
Power function is switched on
Safety cut-out
Safety cut-out has been activated
Residual heat indicator
1
3
Warning! Risk of burns from residual heat. After being switched off,
the cooking zones need some time to cool down. Look at the residual
.
heat indicator
Residual heat can be used for melting and keeping food warm.
The induction cooking zones create the heat required for cooking directly in the base of the cookware. The glass ceramic is merely heated
by the residual heat of the cookware.
The cooling fan switches itself on and off depending upon the temperature of the electronics.
8
Operating the appliance
3
Use the induction cooking zones with suitable cookware.
Switching the appliance on and off
Control panel
3
Display
Pilot light
Switch on
Touch
for 2 seconds
/
lights up
Switch off
Touch
for 1 second
/ none
goes out
After switching on, within approx. 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself
off.
Setting the heat setting
Control panel
3
Display
Increase
Touch
to
Decrease
Touch
to
Switch off
Touch
The keep warm setting
food warm.
and
/
at the same time
lies between
and
. It is used to keep
Switching the STOP+GO function on and off
The STOP+GO function simultaneously switches all cooking zones that
are switched on to the keep warm setting and then back to the heat
setting that was previously set. This function can be used to briefly interrupt and then continue the cooking process e.g. to take a telephone
call.
Control panel
To switch on
Touch STOP+GO
To switch off Touch STOP+GO
3
3
Display
heat setting that was previously set (not automatic
warm up function)
Timer functions are not stopped by STOP+GO.
STOP+GO locks the whole control panel except the sensor field
.
9
Using the automatic warm-up function
All cooking zones are equipped with an automatic warm-up function.
The automatic warm-up function sets the cooking zone to the highest
setting for a certain period of time and then automatically switches
back to the cooking setting that was originally set.
Step
Setting the maximum setting
/
2.
Place to one side for a moment
/
touch
4.
touch in order to set the desired cooking setting
until
/
after 3 seconds
If during the automatic warm up
a higher heat setting is selected,
e.g. from
to , the automatic warm up is adjusted.
The length of time that the automatic warm up function operates depends on the heat setting selected.
Heat
setting
10
Display
1.
3.
3
Control panel
Length of the
automatic warm up
[min:sec]
Intermedi- Length of the
ate
automatic warm up
heat
[min:sec]
setting
v
0:10
1
0:10
2
0:10
2.
1:20
3
3:10
3.
4:20
4
5:50
4.
8:10
5
10:10
5.
10:30
6
2:00
6.
2:00
7
2:30
8
2:50
9
---
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off” sensor field, can
be locked at any time in order to prevent the settings being changed
e.g. by wiping over the panel with a cloth.
Control panel
3
Switch on
Touch
Switch off
Touch
Display
(for 3 seconds)
previously set heat setting
When you switch the appliance off, the locking function is automatically switched off.
11
Using the child safety device
The child safety device prevents unintentional use of the appliance.
Setting the child safety device
Step
Control panel
1.
Switch on the appliance
(Do not set a heat setting)
2.
Touch
3.
Touch
Display/Signal
until the signal sounds Acoustic signal
Appliance switches off. The child safety device is engaged.
Releasing the child safety device
Step
1.
Control panel
Display/Signal
Switch on the appliance
2.
Touch
3.
Touch
until the signal sounds Acoustic signal
Appliance switches off. The child safety device is released.
Overriding the child safety device
The child safety device can be released in this way for a single cooking
session; it remains activated afterwards.
Step
1.
2.
Control panel
Display/Signal
Switch on the appliance
Touch
and
at the same time
/ acoustic signal
Until the appliance is next switched off, it can used as normal.
12
Switching the power function on and off
The power function
makes more power available to the induction
cooking zones, e.g. to bring a large quantity of water to the boil quickly.
The power function is activated for 10 minutes. After that the induction cooking zone automatically switches back to heat setting 9.
Control panel
Switch on
Touch
Switch off
Touch
Display
Touch
3
If the power function has ended, the cooking zones automatically
switch back to the heat setting set previously.
Power Management
The cooking zones have a maximum
power available to them.
If this power range is exceeded by
switching on the power function,
Power Management reduces the
heat setting of another cooking
zone.
The indicator for this cooking zone
changes between the heat setting
set and maximum possible heat setting for one minute. Thereafter the
actual heat setting is displayed.
Example:
Last cooking Other cooking zone
zone switched
on
set heat setting set heat
setting
indicator
actual heat
setting
p
7 alternating with 9
7
9
13
Using the timer
All cooking zones can use each use one of the two timer functions at
the same time.
3
3
Function
Condition
Outcome after the
time has elapsed
Automatic cut-out
a heat setting is set
acoustic signal
00 flashes
Cooking zone
switches off
Countdown timer
cooking zones not in use
acoustic signal
00 flashes
If a cooking zone is switched off, the timer function set is also switched
off.
If a heat setting is set on this cooking zone in addition to a countdown
timer, the cooking zone is switched off after the time set has elapsed.
Selecting a cooking zone
Step
3
14
Control panel
Display
1.
Touch
once
Pilot light of the first
cooking zone flashes
2.
Touch
once
Pilot light of the second
cooking zone flashes
3.
Touch
once
Pilot light of the third
cooking zone flashes
4.
Touch
once
Pilot light of the fourth
cooking zone flashes
The heat setting indicator of the selected cooking zone goes out, as
long as the timer time can be set.
3
3
If the pilot light is flashing more slowly, the heat setting indicator appears again and the heat setting can be re-set or modified.
If other timer functions are set, after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes.
Setting the time
Step
Control panel field
1.
zone
2.
Display
Select cooking Pilot light of the cooking zone selected flashes
Touch
or for
00 to 99 minutes
the cooking zone selected
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Switching off the Timer function
Step
Control panel
Display
1.
Select a cooking zone
Pilot light of the selected cooking
zone flashes more quickly.
Remaining time is displayed
2.
Touch
for the
The remaining time counts down to
cooking zone select- 00.
ed
Simultaneoulsy
00 is displayed.
and for
touch
the cooking zone selected
The pilot light goes out.
The Timer function for the selected cooking zone is switched off.
15
Changing the time
Step
Control panel field
1.
Select cooking Pilot light of the cooking zone selected flashes faster
The time remaining is displayed
zone
2.
Display
Touch
or
for
01 to 99 minutes
the cooking zone selected
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Displaying the time remaining for a cooking zone
Step
Control panel field
1.
zone
Display
Select cooking Pilot light of the cooking zone selected flashes faster
The time remaining is displayed
After a few seconds the pilot light flashes more slowly.
Switching off the acoustic signal
Step
Control panel field
Acoustic signal
1.
Touch
Acoustic signal to acknowledge.
Acoustic signal stops.
16
Safety cut-out
Cooking surface
• If after switching on the cooking surface, a heat setting is not set for
a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off.
• If one or more sensor fields are covered by objects (a pan, cloths, etc.)
for longer than approx. 10 seconds, a signal sounds and the cooking
surface switches off automatically.
• If all cooking zones are switched off, the cooking surface automatically switches itself off after approx. 10 seconds.
Control panel
• When the appliance is switched off, if one or more of the sensor
fields on the control panel are covered for more that 10 seconds, an
acoustic signal sounds. The acoustic signal switches itself off automatically when the sensor fields are no longer covered.
Induction cooking zones
• In the event of overheating (e.g. when a pan boils dry) the cooking
zone automatically switches itself off. is displayed. Before being
used again, the cooking zone must be set to 0 and allowed to cool
down.
• If cookware that is not suitable is used, flashes in the display and
after 2 minutes the display for the cooking zone switches itself off.
• If one of the cooking zones is not switched off after a certain time, or
if the heat setting is not modified, the relevant cooking zone switches
off automatically. is displayed. Before being used again, the cooking zone must be set to 0.
Heat setting
Switches off after
V, 1 - 2
6 hours
3-4
5 hours
5
4 hours
6-9
1.5 hours
17
Tips on Cooking and Frying
3
Information on acrylamides
According to the latest scientific knowledge, intensive browning of
food, especially in products containing starch, can constitute a health
risk due to acrylamides. Therefore we recommend cooking at the lowest
possible temperatures and not browning foods too much.
Cookware for induction cooking zones
Cookware material
Cookware material
Steel, enamelled steel
yes
Cast iron
yes
Stainless steel
3
3
Suitable
if appropriately labelled by the manufacturer
Aluminium, copper, brass
---
Glass, ceramic, porcelain
---
Cookware for induction cooking zones is labelled as suitable by the
manufacturer.
Suitability test
Cookware is suitable for induction cooking, if …
• ... a little water on an induction cooking zone set to heat setting 9 is
heated within a short time.
• ... a magnet sticks to the bottom of the cookware.
Certain cookware can make noises when being used on induction cooking zones. These noises are not a fault in the appliance and do not affect operation in any way.
Bottom of the cookware
The bottom of the cookware should be as thick and flat as possible.
Pan size
Induction cooking zones adapt automatically to the size of the bottom
of the cookware up to a certain limit. However the magnetic part of
the bottom of the cookware must have a minimum diameter depending
upon the size of the cooking zone.
18
3
Diameter of cooking zone
[mm]
Minimum diameter of dish base
[mm]
210
180
180
145
145
120
The cookware must be placed centrally on the cooking zone.
Tips on energy saving
2
2
Place cookware on the cooking zone before it is switched on.
If possible, always place a lid on the cookware.
19
Examples of cooking applications
The information given in the following table is for guidance only.
Heat
setting
Cookingprocess
0
1
suitable for
Cooking
time
Tips/Hints
Off position
Keeping
food
warm
Keeping cooked foods
warm
as required
Cover
Melting
Hollandaise sauce,
melting butter, chocolate,
gelatine
5-25 mins.
Stir occasionally
Solidifying
Fluffy omelettes, baked
eggs
10-40 mins.
Cook with lid on
1-2
Simmering rice and milkAdd at least twice as
based dishes
much liquid as rice, stir
25-50 mins.
Heating up ready-cooked
milk dishes part way
meals
through cooking
2-3
Simmering on
low heat
3-4
Steaming Steaming vegetables, fish
20-45 mins.
Braising
braising meat
4-5
With vegetables add
only a little liquid (a
few tablespoons)
Steaming potatoes
20-60 mins.
Use only a little liquid,
e. g.: max. ¼ l water
for 750 g potatoes
Cooking larger quantities
of food, stews and soups
60-150
mins.
Up to 3 l liquid plus ingredients
Steady
frying
Turn halfway through
cooking
5-15 mins.
per pan
Turn halfway through
cooking
Boiling
6-7
Gentle
Frying
Frying escalopes, veal
cordon bleu, cutlets, rissoles, sausages, liver, roux,
eggs, pancakes, doughnuts
7-8
Heavy
Frying
Hash browns, loin steaks,
steaks, Flädle (pancakes
for garnishing soup)
9
Boiling
Searing
Deep
frying
Boiling large quantities of water, cooking pasta, searing meat
(goulash, pot roast), deep frying chips
The power function is suitable for heating large quantities of liquid.
20
Cleaning and Care
1
1
1
Take care! Risk of burns from residual heat.
Warning! Sharp objects and abrasive cleaning materials will damage
the appliance. Clean with water and washing up liquid.
Warning! Residues from cleaning agents will damage the appliance.
Remove residues with water and washing up liquid.
Cleaning the appliance after each use
1. Wipe the appliance with a damp cloth and a little washing up liquid.
2. Rub the appliance dry using a clean cloth.
Removing deposits
1. Place a scraper on the glass ceramic surface at an angle.
2. Remove residues by sliding the blade over the surface.
3. Wipe the appliance with a damp cloth and a little washing up liquid.
4. Rub the appliance dry using a clean cloth.
Remove
Type of dirt
imme- when the appliance has
diately
cooled down
sugar, food containing sugar
yes
---
plastics, tin foil
yes
---
limescale and water rings
---
yes
fat splashes
---
yes
shiny metallic discolorations
---
yes
using
a scraper*
cleaner for glass ceramic or stainless
steel*
*Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialist shops
3
3
Remove stubborn residues with a cleaner for glass ceramic or stainless
steel.
Scratches or dark stains on the glass ceramic that cannot be removed
do not however affect the functioning of the appliance.
21
What to do if …
Problem
Possible cause
Remedy
The appliance cannot be
More than 10 seconds have Switch the appliance on
switched on or is not oper- passed since the appliance again.
ating
was switched on
The lock is switched on
Switch off the lock (See
the section “Locking/unlocking the control panel”)
The child safety device is
switched on
Deactivate child safety device (See the section “Child
safety device”)
Several sensor fields were
touched at the same time
Only touch one sensor field
Safety cut-out has been
triggered
Remove any objects (pan,
cloths, etc.) that are lying
on the control panel.
Switch the appliance on
again
STOP+GO is activated
Switching off STOP+GO
The residual heat indicator The cooking zone was only If the cooking zone is supis not displaying anything on for a short time and is posed to be hot, call the
therefore not hot
Customer Service Department.
The automatic warm up
function is not switching
itself on
There is still residual heat
on the cooking zone
Let the cooking zone cool
down
The highest heat setting is
set
The highest heat setting
has the same power as the
automatic warm up function
Repeated acoustic signal
One or more sensor fields
(6x), appliance switches off have been covered for
longer than 10 seconds
Uncover sensor field
Acoustic signal sounds
The control panel is wholly Remove objects.
when appliance is switched or partly covered by oboff
jects.
Acoustic signal sounds and The On/Off sensor field has Do not place any objects
appliance switches itself on been covered up, e.g. by a on the control panel
and then off again; after 5 cloth
seconds another acoustic
signal sounds
22
Problem
Display is switching between two heat settings
flashes
Possible cause
Remedy
Power management is reducing the power of this
cooking zone
See the section “Switching
the power function on and
off”
Unsuitable cookware
Use suitable cookware
No cookware on the cooking zone
Place cookware on the
cooking zone
The diameter of the botMove onto a smaller cooktom of the cookware is too ing zone
small for the cooking zone
Use suitable cookware
is lit
and number are displayed
Overheating protection for Switch off the cooking
the cooking zone has been zone. Switch the cooking
triggered
zone on again
Safety cut-out has been
triggered
Switch off the cooking
zone. Switch the cooking
zone on again
Electronics fault
Disconnect the appliance
from the electrical supply
for a few minutes (Take the
fuse out of the house’s wiring system)
If after switching on again,
is displayed again, call
the customer service department
and minus are displayed Light rays that are too
strong on the control panel, for example bright sunlight
1
3
Briefly shade the control
panel, for example with
the hand Acoustic signal
sounds, appliance switches
itself off Switch appliance
on (again)
If you are unable to remedy the problem by following the above
suggestions, please contact your dealer or the Customer Care Department.
Warning! Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from
improper repairs.
If the appliance has been wrongly operated, the visit from the customer
service technician or dealer may not take place free of charge, even
during the warranty period.
23
Disposal
2
2
Packaging material
The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the packaging materials in the appropriate
container at the community waste disposal facilities.
Old appliance
W
The symbol
on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it shall be
handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you
purchased the product.
24
Installation Instructions
Safety instructions
1
1
The laws, ordinances, directives and standards in force in the country of
use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.)
Installation may only be carried out by a qualified electrician.
The minimum distances to other appliances and units are to be observed.
A protective floor must be installed under the appliance.
The cut surfaces of the worktop are to be protected against moisture
using a suitable sealant.
The sealant seals the appliance to the work top with no gap.
Do not use silicon sealant between the appliance and the work top.
When building in, protect the underside of the appliance from steam
and moisture, e.g. from a dishwasher or oven.
Avoid installing the appliance next to doors and under windows. Otherwise hot cookware may be knocked off the rings when doors and windows are opened.
WARNING!
Risk of injury from electrical current.
• The electrical mains terminal is live.
• Make electrical mains terminal free of voltage.
• Observe connection schematic.
• Observe electrical safety rules.
• Ensure anti-shock protection through correct installation by a qualified electrician.
• The appliance must be connected to the electrical supply by a qualified electrician.
IMPORTANT!
Risk of injury from electrical current.
Loose and inappropriate plug and socket connections can make the terminal overheat.
• Have the clamping joints correctedly installed by a qualified electrician.
• Use strain relief clamp on cable.
• In the event of single-phase or two-phase connection, the appropriate mains cable of type H05BB-F Tmax 90° (or higher) must be used.
25
• If this appliance’s mains cable is damaged, it must be replaced by a
special cable (type H05BB-F Tmax 90°; or higher). The latter is available from the Customer Care Department.
A device must be provided in the electrical installation which allows the
appliance to be disconnected from the mains at all poles with a contact
opening width of at least 3 mm.
Suitable isolation devices include line protecting cut-outs, fuses (screw
type fuses are to be removed from the holder), earth leakage trips and
contactors.
26
Service
In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions
(section “What to do if…”).
If you were not able to remedy the problem yourself, please contact the
Customer Care Department or one of our service partners.
In order to be able to assist you
quickly, we require the following
information:
– Model description
– Product number (PNC)
– Serial number (S No.)
(for numbers see rating plate)
– Type of fault
– Any error messages displayed by
the appliance
– three digit letter-number combination for glass ceramic
So that you have the necessary reference numbers from your appliance
at hand, we recommend that you write them in here:
Model description:
.....................................
PNC:
.....................................
S No:
.....................................
29
Assembly / Montage
98
99
100
Guarantee/Customer Service Centres
EURO-LINE APPLIANCES
LENGTH OF WARRANTY
EURO-LINE WILL PAY FOR:
TWO YEAR FULL WARRANTY
Replacement parts and/or labour to repair
defects in materials or workmanship. Service
must be provided by an authorized Euro-Line
company (unless advised otherwise).
from original date of purchase, including parts
and labour, to the first purchaser of this
appliance
THIS GUARANTEE DOES NOT COVER COMMERCIAL USE.
The name Euro-Line Appliances, for service matters, incorporates work performed
by authorized service agents or service companies.
EXCEPTIONS:
EURO-LINE APPLIANCES WILL NOT PAY FOR THE FOLLOWING SERVICE
CALLS:
1. To install or correct the installation of an appliance
2. To instruct the use of an appliance.
3. To replace house fuses, re-set circuit breakers or correct house wiring.
4. To correct house plumbing.
5. To clean drains, filters or garbage disposers.
6. To repair an appliance if it fails due to misuse or abuse.
EURO-LINE APPLIANCES WILL NOT PAY WHEN THE FOLLOWING OCCURS:
1. Damage resulting from fires, acts of God, alteration, improper installation, or
installation not in accordance with local building codes.
2. Pickup or delivery of major appliances requiring service. The appliances are
designed to be repaired in the home. However, Euro-Line will not be responsible
for travelling and labour costs if the customer lives in excess of 50 km/30 miles,
or if the travel time is in excess of 30 minutes from the nearest service center.
Any excess to this will not be covered by the warranty.
In no event, will Euro-Line be responsible for incidental or consequential damages.
For warranty service and parts, contact EURO-PARTS. Service will be provided
during normal business hours. Should you have a service problem that is not
resolved locally, contact:
For Service and Parts Contact:
35
EURO-PARTS, USA
EURO-PARTS, CANADA
EURO-LINE APPLIANCES
Tel: 1-800-561-4614
Tel: 1-800-678-8352
1-800-421-6332
Fax: 1-519-528-5001
Fax: 1-519-528 5001
Tel. Direct: 1-905-829-3980
Fax: 1-905-829-3985
User Instructions & Installation Manual
Service & Repair
To save you time and money please have the following information ready in case
you have to call for service:
• Name of the dealer from whom you purchased the appliance.
• Model number (shown on the rating plate)
• Serial number (shown on the rating plate)
• Date of purchase.
You should also retain the original purchase receipt to support any claim made
under the warranty. (We suggest you staple the receipt to this page).
If service is required, contact the Service Center:
EURO-PARTS, CANADA
EURO-PARTS, USA
Tel: 1 800 678 8352
Tel: 1-800-561-4614
Fax: 1-519-528-500
Fax: 1-519-528-5001
DISTRIBUTED BY: EURO-LINE APPLIANCES 2278 SPEERS ROAD OAKVILLE,
ONTARIO CANADA L6L 2X8 1-800-421-6332 Tel: 905-829-3980 Fax:
905-829-3985 www.euro-line-appliances.com
36
From the Electrolux Group. The world´s No.1 choice.
The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor
use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines,
vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more
than 150 countries around the world.
AEG Hausgeräte GmbH
Postfach 1036
D-90327 Nürnberg
http://www.aeg-electrolux.de
© Copyright by AEG
822 925 923-A-191205-02
Subject to change without notice
Sous réserve de modifications
Wijzigingen voorbehouden
Download PDF