SD-3860SC DVD Video Player User'

DIGITAL VIDEO
DVD VIDEO PLAYER
SD-3860SC
OWNER’S MANUAL
3860
© 2004 Toshiba Corporation
Before operating the unit, please read this manual thoroughly.
2C01801A [E] COVER
1
1/13/04, 5:05 PM
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE.
DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
CAUTION:
TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED
TO PREVENT BLADE EXPOSURE.
CAUTION:
This Digital Video Disc Player employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain for future
reference. Should the unit require maintenance, contact an authorized service location - see service
procedure.
Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
Visible and invisible laser radiation when open and interlocks defeated.
DO NOT STARE INTO BEAM.
FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rule. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING:
Changes or modifications made to this equipment, not expressly approved by Toshiba, or parties
authorized by Toshiba, could void the user’s authority to operate the equipment.
CAUTION:
Servicing instructions are for use by qualified service personnel only. To reduce the risk of electric
shock do not perform any servicing other than that contained in the operating instructions unless you
are qualified to do so.
In the spaces provided below, record the Model and Serial No. located on the rear panel of your DVD video player.
Model No.
Serial No.
Retain this information for future reference.
2
2C01801A [E] P02-05
2
1/13/04, 5:05 PM
IMPORTANT SAFEGUARDS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS PROVIDED IN THIS
OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR
FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following
procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that
can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1.
2.
3.
4.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
3
2C01801A [E] P02-05
3
1/13/04, 5:05 PM
IMPORTANT SAFEGUARDS
(Continued)
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
S3125A
13. Unplug this apparatus during lightning storms or when unused for long periods
of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. When you use headphones on the amplifier, keep the volume at a moderate
level. If you use the headphones continuously with high volume sound, it may
cause hearing damage.
4
2C01801A [E] P02-05
4
1/13/04, 5:05 PM
16. Do not overload wall outlets; extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
17. Never insert objects of any kind into this apparatus through openings as they
may touch dangerous voltage points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any kind on the apparatus.
18. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do
so may cause serious personal injury.
19. Do not place a heavy object on or step on the apparatus. The object may fall,
causing serious personal injury and serious damage to the apparatus.
20. Do not use a cracked, deformed, or repaired disc. These discs are easily
broken and may cause serious personal injury and apparatus malfunction.
5
2C01801A [E] P02-05
5
1/13/04, 5:05 PM
Introduction
Precautions
Notes on handling
When shipping the DVD video player, the original
shipping carton and packing materials come in handy.
For maximum protection, repack the unit as it was
originally packed at the factory.
Do not use volatile liquids, such as insect spray, near
the DVD video player. Do not leave rubber or plastic
products to contact the DVD video player for prolonged
period. They will leave marks on the finish.
The top and rear panels of the DVD video player may
become warm after a long period of use. This is not a
malfunction.
When the DVD video player is not in use, be sure to
remove the disc and turn off the power.
If you do not use the DVD video player for a long
period, the unit may not function properly in the
future. Turn on and use the DVD video player
occasionally.
Notes on locating
Place the DVD video player on a level surface. Do not
use it on a shaky or unstable surface such as a
wobbling table or inclined stand. The loaded disc may
become dis-aligned and damage the DVD video
player.
When you place this DVD video player near a TV,
radio, or VCR, the playback picture may become poor
and the sound may be distorted. In this case, place
the DVD video player away from the TV, radio, or
VCR.
Notes on moisture condensation
Moisture condensation damages the DVD video
player. Please read the following carefully.
Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same way,
moisture may condense on the optical pick-up lens
inside this unit, one of the most crucial internal parts of
the DVD video player.
le of mo
Examp ensat isture
ion!
cond
Optical pick-up
lens
Moisture condensation occurs during the
following cases.
When you bring the DVD video player directly from a
cold place to a warm place.
When you use the DVD video player in a room where
you just turned on the heater, or a place where the
cold wind from the air conditioner directly hits the unit.
In summer, when you use the DVD video player in a
hot and humid place just after you move the unit from
an air conditioned room.
When you use the DVD video player in a humid place.
It’s too
warm!
Notes on cleaning
Use a soft, dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe
it dry.
Do not use any type of solvent, such as thinner and
benzine, as they may damage the surface of the DVD
video player.
If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
To obtain a clear picture
The DVD video player is a high technology, precision
device. If the optical pick-up lens and disc drive parts
are dirty or worn down, the picture quality will
deteriorate. To obtain a clear picture, we recommend
regular inspection and maintenance (cleaning or parts
replacement) every 1,000 hours of use depending on
the operating environment. For details, contact your
nearest dealer.
Do not use the DVD video player when moisture
condensation may occur.
If you use the DVD video player in such a situation, it
may damage discs and internal parts. Remove the
disc, connect the power cord of the DVD video player
to the wall outlet, turn on the DVD video player, and
leave it for two or three hours. After two or three
hours, the DVD video player will have warmed up and
evaporated any moisture. Keep the DVD video player
connected to the wall outlet and moisture
condensation will seldom occur.
Wa
it!
6
2C01801A [E] P06-09
6
1/13/04, 5:05 PM
Wall outlet
Notes on discs
On handling discs
Structure of disc contents
Do not touch the playback side of the disc.
Normally, DVD video discs are divided into titles, and
the titles are sub-divided into chapters. Video CDs and
Audio CDs are divided into tracks.
DVD video disc
DVD video disc
Title 1
Chapter 1
Title 2
Chapter 2
Chapter 1
Chapter 2
Chapter 3
Playback side
Do not attach paper or tape to discs.
Video CD/Audio CD
Video CD/Audio CD
Track 1
Track 2
Track 3
Track 4
Track 5
On cleaning discs
Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc
clean.
Each title, chapter or track is assigned a number, which
is called “title number”, “chapter number” or “track
number” respectively.
There may be discs that do not have these numbers.
Notes on copyright
If you cannot wipe off the dust with a soft cloth, wipe
the disc lightly with a slightly moistened soft cloth and
finish with a dry cloth.
Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or antistatic
spray for vinyl LPs. It may damage the disc.
On storing discs
Do not store discs in a place subject to direct sunlight
or near heat sources.
Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.
It is forbidden by law to copy, broadcast, show,
broadcast on cable, play in public, and rent copyrighted
material without permission.
DVD video discs are copy protected, and any recordings
made from these discs will be distorted.
This product incorporates copyright protection
technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
7
2C01801A [E] P06-09
7
1/13/04, 5:05 PM
Introduction
Notes on discs (continued)
About this owner’s manual
This owner’s manual explains the basic instructions of
this DVD video player. Some DVD video discs are
produced in a manner that allows specific or limited
operation during playback. As such, the DVD may not
respond to all operating commands. This is not a defect
in the DVD. Refer to instruction notes of discs.
Playable discs
This DVD video player can play the following discs.
Disc Mark
Contents
Disc
Size
Maximum
playback time
Approx. 4 hours
(single sided disc)
12 cm
“ ” may appear on the TV screen during operation.
A “ ” means that the operation is not permitted by the
DVD or the disc.
For example, sometimes it is unable to stop the
playback of copyright message of the disc when the
STOP (3) button is pressed. Alternatively, the “ ” may
also indicate that the feature is not available for the disc.
Audio
+
Video
(moving
pictures)
DVD
video
discs
Approx. 8 hours
(double sided disc)
Approx. 80 minutes
(single sided disc)
8 cm
Approx. 160 minutes
(double sided disc)
Notes on region numbers
The region number of this DVD is 1. If region numbers,
which stand for their playable area, are printed on your
DVD video disc and you do not find 1 or ALL , disc
playback will not be allowed by the player. (In this case,
the DVD will display a message on-screen.)
Video
CDs
DIGITAL VIDEO
Audio
+
Video
(moving
pictures)
On Video CDs
This DVD supports Video CDs equipped with the PBC
(Version 2.0) function. (PBC is the abbreviation of
Playback Control.) You can enjoy two playback
variations depending on types of discs.
• Video CD not equipped with PBC function
(Version 1.1)
Sound and movie can be played on this unit in the
same way as an audio CD.
• Video CD equipped with PBC function
(Version 2.0)
In addition to operation of a Video CD not equipped
with the PBC function, you can enjoy playback of
interactive software with search function by using the
menu displayed on the TV screen (Menu Playback).
Some of the functions described in this owner’s
manual may not work with some discs.
Audio
CDs
8
Approx. 74 minutes
8 cm
Approx. 20 minutes
12 cm
Approx. 74 minutes
8 cm
(CD
single)
Approx. 20 minutes
Audio
The following discs are also available.
DVD-R/RW discs of DVD video format
CD-R/CD-RW discs of CD-DA, Video CD, SVCD,
MP3, WMA or JPEG format
Kodak Picture CD and FUJICOLOR CD format
Some of these discs may be incompatible.
• You cannot play discs other than those listed above.
• You cannot play discs of DVD-RAM,DVD-ROM, Photo
CD, etc., or non standardized discs even if they may
be labeled as above.
• Some CD-R/RWs can not be played back depending
on the recording conditions.
• This unit uses the NTSC color system, and cannot
play DVD video discs recorded in any other color
system (PAL, SECAM, etc.).
8
2C01801A [E] P06-09
12 cm
1/13/04, 5:05 PM
Table of contents
Introduction
Advanced playback
SAFETY PRECAUTIONS ........................................ 2
IMPORTANT SAFEGUARDS ................................... 3
Zooming ................................................................. 21
Precautions .............................................................. 6
Notes on discs ......................................................... 7
Table of contents ...................................................... 9
Identification of controls ......................................... 10
Front panel ....................................................... 10
Rear panel ........................................................ 10
FL display ......................................................... 11
Remote control ................................................. 12
Loading batteries .............................................. 13
Operating with the remote control .................... 13
Connections
Connecting to a TV ................................................ 14
Connecting to a TV ........................................... 14
Connecting to an audio system and TV
equipped with component video inputs ............ 15
Connecting to optional equipment ......................... 16
Connecting to an amplifier equipped with a
Dolby Digital decoder ....................................... 16
Connecting to an amplifier equipped with
Dolby Surround Pro Logic ................................ 16
Connecting to an amplifier equipped with
a DTS decoder ................................................. 16
Connecting to an amplifier equipped with
an MPEG2 audio decoder ................................ 17
Connecting to an amplifier equipped with
a digital audio input .......................................... 17
Basic playback
Locating desired scene .......................................... 21
Marking the scenes ................................................ 22
Returning to the scenes ......................................... 22
Repeat playback .................................................... 23
A-B Repeat playback ............................................. 23
Program playback .................................................. 24
Random playback .................................................. 24
Changing angles .................................................... 25
Title selection ......................................................... 25
DVD menu .............................................................. 25
Changing soundtrack language ............................. 26
Setting surround sound .......................................... 26
Subtitles ................................................................. 27
Karaoke playback .................................................. 27
Disc status .............................................................. 28
To turn off the PBC ................................................. 28
MP3/WMA/JPEG operation ................................... 29
MP3/WMA/JPEG CD information ..................... 29
MP3/WMA CD playback ................................... 30
JPEG CD playback ........................................... 31
Slide show playback ......................................... 31
Selecting PROGRESSIVE scan ............................ 32
Function setup
Customizing the function settings .......................... 33
Setting procedure ............................................. 33
Setting details ................................................... 34
Temporary disabling of rating level by DVD disc .... 38
Language code list ................................................. 39
Playing a disc ......................................................... 18
Multi brand remote control ..................................... 40
Setting TV control codes .................................. 40
Basic playback ................................................. 18
Playing in fast reverse or fast forward directions . 20
Table of TV brand codes .................................. 40
Playing fram by frame ...................................... 20
Playing in slow-motion ...................................... 20
Locating a chapter or track ............................... 20
Others
Troubleshooting guide ............................................ 41
Specifications ......................................................... 42
LIMITED WARRANTY DVD VIDEO PLAYER ........ 43
9
2C01801A [E] P06-09
9
1/13/04, 5:05 PM
Introduction
Identification of controls
See the page in
for details.
Front panel
ON/STANDBY (
) button
18
STOP button
Disc tray
18
Power indicator
OPEN/CLOSE button
SKIP buttons
PLAY button
18
18
18
Remote sensor
20
13
DVD display
11
18
Rear panel
When connecting the optical digital cable, remove
the cap and fit the connector into the jack firmly.
When not using the jack, keep the cap inserted
to protect it from dust intrusion.
COMPONENT/S-VIDEO selector switch
14 15
OPTICAL DIGITAL AUDIO OUT jack
16 17
COAXIAL DIGITAL AUDIO OUT jack
16 17
OUT PUT
DIGITAL
COMPONENT
Y
S-VIDEO
PB
L
COAXIAL
OPTICAL AUDIO
PR
R
VEDIO
VIDEO OUT jack
AUDIO OUT (L/R) jacks
14
14 15
COMPONENT VIDEO OUT (Y/PB/PR) jacks
S-VIDEO OUT jack
15
AC Power cord
14
10
2C01801A [E] P10-13
10
1/13/04, 5:05 PM
FL display
TRACK indicator (TRACK)
CD indicator (CD)
Repeat mode indicators
(ALL REPEAT, REPEAT, REPEAT A
DVD indicator (DVD)
DVD CD
TRACK
Play indicator (
Pause indicator (
)
ALL
REPEAT A
B)
B
Message or number indicator
(Title, chapter, track, playing time or other information)
)
Dimmer function
This function will change the brightness of the FL display during Power-on status.
1. Press FL DIM once to dim the FL display.
2. Press FL DIM twice to turn off the FL display.
3. Press FL DIM third times to turn on the FL display.
The display may vary depending on the types of discs you play.
DVD video disc
Video CD
• During playback:
• During playback:
Example
Example
Audio CD
• During playback:
Example
DVD
CD
Playing track 1
Some discs may not display elapsed
time.
Some discs may not display track
numbers or elapsed time.
TRACK
Playing track 6
Some discs may not display track
numbers or elapsed time.
11
2C01801A [E] P10-13
11
1/13/04, 5:05 PM
Introduction
Identification of controls (continued)
The instructions in this manual describe the functions on the remote control. See the page in
for details.
Remote control
18
DVD button
*TV button
*POWER (
) button
40
OPEN/CLOSE button
*Number buttons (0Ð9)
21
SEARCH button
*100 button
25
ANGLE button 25
PLAY button
REW button
MARKER button
18
STOP button
SLOW buttons
20
SETUP button
/
A-B RPT button
11
21
19
23
*PROGRAM button
40
)
*CH +/Ð, VOL +/Ð buttons
RETURN button
40
33
MENU button
Use the MENU button to display the menu
included on many DVD video discs.
To operate a menu, follow the instructions
in “DVD menu.” 25
PROGRESSIVE button
*ENTER button
12
32
21
*TV control buttons
The various brands of TV listed on page 40
can be operated with this remote control.
There may be some TV models that cannot
be operated with this remote control. If this
is the case, use the original remote control
supplied with the TV.
12
2C01801A [E] P10-13
20
PAUSE/STEP button
33
Direction buttons
/
22
18
FL DIM button
20
SKIP buttons
/
23
20
FF button
(
21
PLAY MODE button
27
26
AUDIO button
40
ZOOM button
MENU button
SUBTITLE button
40
21
21
CLEAR button
25
TOP MENU button
18
INPUT SELECT button
28
*DISPLAY button
18
1/13/04, 5:05 PM
Loading batteries
1
Slide the battery compartment cover in the
direction of the arrow.
2
Install two “AAA” batteries (supplied), paying
attention to the polarity diagram in the battery
compartment.
Operating with the remote control
Point the remote control at the remote
sensor and press the buttons.
Within about 7 m (23 feet)
Distance: About 7 m (23 feet) from the front of the
remote sensor
Angle: About 30° in each direction of the front of the
remote sensor
3
Replace the compartment cover.
Notes on batteries
Improper use of batteries may cause battery leakage and
corrosion. To operate the remote control correctly, follow the
instructions below.
• Do not insert batteries into the remote control in the wrong
direction.
• Do not charge, heat, open, or short-circuit the batteries. Do
not throw batteries into a fire.
• Do not leave dead or exhausted batteries in the remote
control.
• Do not use different types of batteries together, or mix old
and new batteries.
• If you do not use the remote control for a long period of time,
remove the batteries to avoid possible damage from battery
corrosion.
• If the remote control does not function correctly or if the
operating range becomes reduced, replace all batteries with
new ones.
• If battery leakage occurs, wipe the battery liquid from the
battery compartment, then insert new batteries.
* Do not expose the remote sensor of the DVD video
player to a strong light source such as direct sunlight
or other illumination. If you do so, you may not be able
to operate the DVD video player via the remote
control.
Notes on the remote control
• Direct the remote control at the remote sensor of the DVD
video player.
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or
humid place.
• Do not spill water or put anything wet on the remote control.
• Do not disassemble the remote control.
• When using the remote control, press the button at intervals
of about 1 second to ensure the correct mode of operation.
13
2C01801A [E] P10-13
13
1/13/04, 5:05 PM
Connections
Connecting to a TV
Connect the DVD video player to your TV.
Connecting to a TV
Signal flow
OUT PUT
DIGITAL
COMPONENT
Y
S-VIDEO
L
PB
COAXIAL
OPTICAL AUDIO
PR
To S
VIDEO
OUT
(red)
To AUDIO
OUT
(white)
R
VEDIO
(yellow)
To VIDEO
OUT
To wall outlet
Audio/video cable (supplied)
To video input
To audio inputs
(red)
S video cable (not supplied)
(white)
(yellow)
To S video input
If the TV has an S video input,
connect the DVD video player with
an S video cable. When using an
S video cable, do not connect the
yellow video cable.
Set the COMPONENT/S-VIDEO
selector switch to the S-VIDEO
position.
TV or monitor with
audio/video inputs
Notes:
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet
before making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD video player to a Y cable
adapter (not supplied) and then connect to your TV.
• Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or
video selector, the playback picture may be distorted as DVD video discs are copy protected.
14
2C01801A [E] P14-17
14
1/13/04, 5:05 PM
Component video outputs/inputs
PROGRESSIVE outputs/inputs
Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video
signal. Connecting to these inputs allows you to view the highest quality pictures with less flicker.
INTERLACED outputs/inputs
Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy the highest quality
DVD picture playback.
Connecting to an audio system and TV equipped with component video inputs
Signal flow
OUT PUT
DIGITAL
COMPONENT
Y
S-VIDEO
PB
L
COAXIAL
OPTICAL AUDIO
PR
R
To AUDIO OUT
(red)
To PB
To Y
VIDEO VIDEO
OUT
OUT
(white)
Audio cable
(not supplied)
To PR
VIDEO
OUT
To audio inputs
of the amplifier
(red)
VEDIO
If the TV has the Component input,
connect the DVD video player with
the Component cable. When using
the Component cable, do not
connect the yellow video cable.
To wall outlet
Set the COMPONENT/S-VIDEO
selector switch to the COMPONENT
position.
(white)
Audio system
To PR video input
TV or monitor with
ColorStream®
component video inputs
To PB video input
To Y video input
Component video cable (not supplied)
Notes:
• Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR)
• In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case,
adjust the TV or monitor for optimum performance.
Notes:
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the
DVD video player away from the tuner and radio.
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD video player’s power cord. If you leave the amplifier power
on, the speakers may be damaged.
• When connecting to a TV using the Video or S-video jack, do not set the COMPONENT/S-VIDEO selector switch to
the COMPONENT position and make the Progressive scan mode On with the PROGRESSIVE button. If you do it, the
Video and S-video outputs do not feed the correct signals and you cannot see any picture. To turn off the
Progressive scan mode, select PROGRESSIVE scan Off (see page 32).
15
2C01801A [E] P14-17
15
1/13/04, 5:05 PM
Connections
Connecting to optional equipment
You can enjoy high quality dynamic sounds by connecting the DVD video
player to optional audio equipment.
: Front speaker
: Rear speaker
For connection to your TV, see “Connecting to a TV” 14 15 .
: Sub woofer
: Center speaker
: Signal flow
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this
realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by
connecting the DVD video player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have
a Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark.
Amplifier equipped with a
Dolby Digital decoder
OUT PUT
DIGITAL
COMPONENT
Y
S-VIDEO
L
PB
COAXIAL
OPTICAL AUDIO
PR
To COAXIAL
type digital
audio input
To OPTICAL
type digital
audio input
R
VEDIO
Connect either.
Manufactured under license
from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the
double-D symbol are trademarks
of Dolby Laboratories.
Optical digital cable (not supplied)
75 Ω coaxial cable (not supplied)
Connecting to an amplifier equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left
front speakers, a center speaker, and one or two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an amplifier equipped with a Dolby Digital decoder.” Refer to
that amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
*
OUT PUT
Amplifier equipped with
Dolby Surround Pro Logic
DIGITAL
COMPONENT
Y
S-VIDEO
L
PB
COAXIAL
OPTICAL AUDIO
PR
To audio input
To AUDIO OUT
Audio cable (not supplied)
R
VEDIO
* Connect one or two rear
speakers. The output sound
from the rear speakers will
be monaural even if you
connect two rear speakers.
Connecting to an amplifier equipped with a DTS decoder
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video discs
or audio CDs.
Amplifier equipped with
a DTS decoder
OUT PUT
DIGITAL
COMPONENT
Y
S-VIDEO
PB
L
COAXIAL
OPTICAL AUDIO
PR
To COAXIAL
type digital
audio input
To OPTICAL
type digital
audio input
Connect either.
“DTS” and “DTS Digital
Surround” are trademarks
of Digital Theater Systems,
Inc.
16
16
VEDIO
Optical digital cable (not supplied)
75 Ω coaxial cable (not supplied)
2C01801A [E] P14-17
R
1/13/04, 5:49 PM
Warning
When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog stereo
jacks. To avoid possible damage to the audio system, you should take proper precautions when the AUDIO OUT (L/R) jacks
of the DVD video player are connected to an amplification system. (Do not leave the ANALOG AUDIO OUT (L/R) cables
dongling.) To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must
be connected to the OPTICAL DIGITAL AUDIO OUT jack or COAXIAL DIGITAL AUDIO OUT jack of the DVD video player.
Connecting to an amplifier equipped with an MPEG2 audio decoder
MPEG2 sound
You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with
an MPEG2 audio decoder or MPEG2 audio processor.
Amplifier equipped with an
MPEG2 audio decoder
OUT PUT
DIGITAL
COMPONENT
Y
S-VIDEO
L
PB
COAXIAL
OPTICAL AUDIO
PR
To COAXIAL
type digital
audio input
To OPTICAL
type digital
audio input
R
VEDIO
Connect either.
Optical digital cable (not supplied)
75 Ω coaxial cable (not supplied)
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and
speaker system (right and left front speakers).
Amplifier equipped with
a digital audio input
OUT PUT
DIGITAL
COMPONENT
Y
S-VIDEO
PB
L
COAXIAL
OPTICAL AUDIO
PR
To COAXIAL
type digital
audio input
To OPTICAL
type digital
audio input
R
VEDIO
Connect either.
Optical digital cable (not supplied)
75 Ω coaxial cable (not supplied)
Notes:
• DO NOT connect the OPTICAL DIGITAL AUDIO OUT jack or COAXIAL DIGITAL AUDIO OUT jack of the DVD video player
to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is
incompatible with the OPTICAL DIGITAL AUDIO OUT jack or COAXIAL DIGITAL AUDIO OUT jack of the DVD video player.
• Connect the OPTICAL DIGITAL AUDIO OUT jack or COAXIAL DIGITAL AUDIO OUT jack of the DVD video player to the
“OPTICAL” or “COAXIAL” input of a Receiver or Processor.
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD video player’s power cord. If you leave the amplifier power
on, the speakers may be damaged.
17
2C01801A [E] P14-17
17
1/13/04, 5:49 PM
Basic playback
Playing a disc
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
4
3, 5
2
DVD
VCD
CD
Power indicator
PLAY STOP
Display window
Basic playback
Preparations:
• When you want to view a disc, turn on the TV and select the corresponding video input connected to the DVD. This
may include S-video or component video inputs which are exclusive to DVD playback.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input
connected to the DVD.
1
2
Press DVD on the remote control to operate
the DVD video player.
Press ON/STANDBY (I /
5
Press OPEN/CLOSE or PLAY on the unit.
OR
).
The DVD turns on and the Power
indicator lights.
The disc tray closes automatically.
On the TV-screen, “ ” changes to
“Reading” and then playback
commences.
“Reading” display will change to
“No Disc”.
(If DVD disc has already loaded,
playback will start automatically.)
Reading
• A menu screen will appear on the TV screen, if
the disc has a menu feature.
Press C/D or B/A to select title, then press
ENTER. Title is selected and play commences.
No Disc
6
3
Press OPEN/CLOSE.
4
Place the disc on the disc tray.
Press STOP to end playback.
The disc tray opens.
With the playback
side down
Resuming facility
• The unit records the stopped point,
depending on the disc. “ ”
appears on the screen. Press
PLAY to resume playback (from
the scene point).
• If you press STOP again or unload
the disc (“ ” appears on the
screen.), the unit will clear the
stopped point.
To start playback in the stop mode
Press PLAY.
• There are two different disc sizes. Place the disc
in the correct guide on the disc tray. If the disc is
out of the guide, it may damage the disc and
cause the DVD to malfunction.
• Do not place a disc which is unplayable in this
DVD.
18
2C01801A [E] P18-20
18
1/13/04, 5:05 PM
POWER
DVD
OPEN/CLOSE
PLAY
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast
may appear on the TV screen while playing a DVD video disc because the high
resolution pictures on these discs include a lot of information. While the amount of
noise depends on the TV you use with this unit, you should generally reduce the
sharpness adjustment on your TV when viewing DVD video discs.
About
STOP
PAUSE/STEP
ENTER
C/D/B/A
DVD
VCD
CD
The DVD VCD CD icons on the heading bar show the playable discs for the
function described under that heading.
DVD : You can use this function with DVD video discs.
VCD : You can use this function with Video CDs.
CD
: You can use this function with Audio CDs and CD-R/RW CDs.
To pause playback (still mode)
To remove the disc
Press PAUSE/STEP during playback.
Press OPEN/CLOSE.
To resume normal playback, press
PLAY.
Remove the disc after the disc tray
opens completely.
• The sound is muted during still
mode.
To stop playback
Press STOP.
STOP
Be sure to press OPEN/CLOSE to close the disc tray
after you remove the disc.
Screen saver function
The screen saver operates when you leave the unit in
DVD stop mode for approx. five minutes.
The screen will repeatedly get dark gradually and back
to normal.
Notes:
• If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen
according to the type of loaded disc. In this case, check your disc again (see pages 8 and 37).
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label downwards (ie. the wrong way up) and press the OPEN/CLOSE button or the PLAY
button on the unit, “Reading” will appear on the display for 30 seconds and then “Incorrect Disc” will continue to be displayed.
• Some discs may not work the resuming facility.
• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 28.
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according
to the disc contents the software producers designed, some playback features may not be available. Also refer to the
instructions supplied with the DVDs.
• Do not move the unit during playback. Doing so may damage the disc.
• Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may
cause the unit to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the unit to
malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the
ON/STANDBY (I / ) button on your remote control once the movie is completed.
• There may be a slight delay between you pressing the button and the function activating.
19
2C01801A [E] P18-20
19
1/13/04, 5:05 PM
Basic playback
Playing a disc (continued)
You can play discs at various speeds.
REW
PLAY
FF
SLOW
/
PAUSE/STEP
SKIP /
DVD
VCD
CD
Playing in fast reverse or fast forward directions
To resume normal playback
Press REW or FF during playback.
Press PLAY.
REW: Fast reverse playback
FF: Fast forward playback
Each time you press the REW or FF
button, the playback speed changes.
DVD
VCD
Notes:
• The DVD video player mutes sound and subtitles during
reverse and forward scan of DVD/VCD video discs.
However, this unit plays sound during fast forward or fast
reverse play of audio CDs.
• The playback speed may differ depending on the disc.
Playing frame by frame
Press PAUSE/STEP during still playback.
Each time you press the PAUSE/
STEP button, the picture advances
one frame.
DVD
VCD
PLAY
To resume normal playback
Press PLAY.
PLAY
Note:
The sound is muted during frame by frame playback.
Playing in slow-motion
To resume normal playback
Press SLOW ( ) Forward or SLOW (
during playback.
) Reverse
Each time you press the button, the
slow-motion speed changes.
DVD
VCD
CD
Press PLAY.
PLAY
Notes:
• The sound is muted during slow-motion playback.
• The Video CD can not play Reverse Slow.
Locating a chapter or track
Press SKIP
or
repeatedly to display the chapter or track number you want.
Playback starts from the selected chapter or track.
To locate succeeding chapters or
tracks.
Playback starts from the beginning of
the current chapter or track.
When you press twice in quick successions,
playback starts from the beginning of
the preceding chapter or track.
Notes:
• A “Prohibition” symbol
may appear at the upper left of the screen. This symbol means either the feature you tried is not
available on the disc, or the DVD can not access the feature at this time. This does not indicate a problem with the DVD.
• The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave
the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent
damage to your television screen. Projection televisions are very susceptible.
20
2C01801A [E] P18-20
20
1/13/04, 5:05 PM
Advanced playback
Zooming/Locating desired scene
0–9
CLEAR
SEARCH
ZOOM
DISPLAY
ENTER
C/D/B/A
DVD
VCD
Zooming
This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the
frame.
1
Press ZOOM during playback.
The centre part of the image will be
zoomed in.
Each press of ZOOM will change the
ZOOM 1 (x 1.3), 2 (x 1.5) and 3
(x 2.0).
2
You may move the frame from the
centre position to UP, DOWN, LEFT or
RIGHT direction.
3
1
D/B
B/A
Ato view a different part of the
Press C/D
frame.
In the zoom mode press ZOOM repeatedly to
return to a 1:1 view ( Off).
Notes:
• You can select the Pause, Slow or Search playback in the zoom mode.
• Some discs may not respond to zoom feature.
DVD
VCD
CD
Locating desired scene
Use the title, chapter and time recorded on the disc to locate the desired point to play back.
To check the title, chapter and time, press DISPLAY.
1
Press SEARCH during playback or stop mode.
Search
3
Press Numbered buttons (0–9) to change the
number.
Search
Time
Chapter
Chapter
/Enter/0
2
/Enter/0
9/Clear/Search
Time
Title
Chapter
/Enter/0
9/Clear/Search
4
Press ENTER. Playback starts.
• When you change the title,
playback starts from Chapter 1
of the selected title.
• Some discs may not work in the
above operation.
Note:
In case of the Video-CD playback with PBC, the SEARCH does not work. To turn off PBC, see page 28 .
2C01801A [E] P21-24
21
12
9/Clear/Search
• If you input a wrong number, press
CLEAR.
• Refer to the package supplied with
the disc to check the numbers.
Press C or D to select the “Time”, “Title” or
“Chapter”.
Search
Time
Title
Title
1/13/04, 5:05 PM
21
Advanced playback
Marking desired scenes
CLEAR
MARKER
The unit stores the points that you want to watch again up to 3 points.
You can resume playback from each scene.
C/D
ENTER
DVD
VCD
1
Marking the scenes
DVD
VCD
1
Press MARKER during playback.
Marker
1
Marker
2
Marker
3
Returning to the scenes
Press MARKER during playback or stop mode.
/Enter/Clear/Marker
2
Marker
1
00
27
54
Marker
2
01
16
25
Marker
3
02
08
31
/Enter/Clear/Marker
Select the blank Marker using C or D.
Then press ENTER at the desired scene.
2
Press C or D to select the Marker 1-3.
• Repeat this procedure to set
the other 2 scenes.
Marker
1
00
27
54
Marker
2
01
16
25
Marker
3
02
08
31
/Enter/Clear/Marker
Marker
1
Marker
2
Marker
3
00
27
54
/Enter/Clear/Marker
3
3
Press ENTER.
Playback starts from the marked
scene.
Press MARKER to remove this display.
To cancel the Marker
Follow the above steps 1~2, then press CLEAR.
Notes:
• Some discs may not work with the marking operation.
• The marking is canceled when you open the disc tray or turn
the power off.
• Some subtitles recorded around the marker may fail to
appear.
22
2C01801A [E] P21-24
22
1/13/04, 5:05 PM
Repeat playback/A-B Repeat playback
PLAY MODE
PLAY
A-B RPT
ENTER
D/B/A
DVD
VCD
CD
1
2
DVD
VCD
CD
Repeat playback
Press PLAY MODE during playback or stop
mode.
A-B Repeat playback
A-B repeat playback allows you to repeat material between
two selected points.
1
Press A-B RPT during playback.
The start point is selected.
A
DVD
A or ENTER once or twice to select
Press B/A
“Chapter” or “Title”.
The unit automatically starts repeat
playback after finishing the current
title or chapter.
Repeat
Off
/Enter/Play Mode
2
Press A-B RPT again.
The end point is selected. Playback
starts at the point that you selected.
Playback stops at the end point, returns to Point A automatically, then
starts again.
Audio CD, Video CD, MP3/WMA CD
Press D to select “Repeat”.
A or ENTER once or twice to select
Press B/A
“Track” or “All”.
A B
The unit automatically starts repeat
playback after finishing the current
track.
Play Mode
Repeat
/Enter/Play Mode
Off
Off
• If you set the repeat mode during stop mode,
press PLAY to start Repeat playback.
3
Press PLAY MODE again to make the screen
disappear.
To resume normal playback
Select Repeat : “Off” in step 2.
Notes:
• Some discs may not work with the repeat operation.
• In case of Video CD with PBC, repeat functions are prohibited during playback.
To resume normal playback
Press A-B RPT again.
“
Off ” appears on the screen.
Notes:
• In A-B Repeat mode, subtitles near the A or B locations may
not be displayed.
• You can not set the A-B Repeat for the scenes that include
multiple angles.
• A-B Repeat playback does not work when Repeat playback is
activated.
• You may not be able to set A-B Repeat, during certain scenes
of the DVD.
• A-B Repeat does not work with an interactive DVD, MP3/WMA/
JPEG CD.
• A-B Repeat is prohibited when PBC is on.
23
2C01801A [E] P21-24
23
1/13/04, 5:05 PM
Advanced playback
Program playback/Random playback
0–9
CLEAR
You can arrange the playback order of tracks or files on the disc. And
also the unit selects tracks or files at random and playback them.
These feature works for Audio CD, Video CD and MP3/WMA/JPEG
CD.
PLAY MODE
PLAY
C/D/B/A
SKIP
ENTER
VCD
CD
1
Program playback
4
Press PLAY MODE during stop mode.
Play Mode
:
Off
Repeat
:
Off
/Enter/Play Mode
2
Play Mode
: Program
Play Mode
: Program
Repeat
: Off
Repeat
: Off
1
4
7
10
1 7
4
7
2
5
8
11
2 3
5
8
11
3
6
9
12
3 11
6
9
12
• To program others, repeat step 3.
• If you input a wrong number, press
CLEAR.
Play Mode
: Program
Repeat
: Off
1 9
4
2 3
5
8
11
3 11
6
9
7
12
Program Playback
/Enter/0
1
10
9/Clear/Play Mode
9/Clear/Play Mode
■ To change the program
1. In the program mode, press C/D/B /A to select the track
number.
2. Press number buttons (0–9) to select the track number
to be replaced.
■ To clear the program one by one
In the program mode, press C/D/B/A to select the track
number. Then press CLEAR.
■ To clear all the programs
In the program mode, press C/D/B/A to select “Clear”.
Then press ENTER.
Notes:
• In playing back the Video CD with PBC, you can not set
Program playback.
• The program is cancelled when you open the disc tray or
turn the power off.
Random playback
Press PLAY MODE during playback or stop
mode.
3
Press PLAY.
PLAY
2
10
Program Playback
/Enter/0
9/Clear/Play Mode
D or B/A
A to select the programming
Press C/D
position. Use Numbered buttons (0–9) to input
the track or file numbers.
Clear
Clear
Program Playback
/Enter/0
VCD
CD
The programs you selected will start to playback in
the order.
• In case of JPEG file, press SKIP
to continue
the program playback.
• To resume normal playback, select Play Mode:
“Off” in step 2.
D to select Play Mode, then press
Press C/D
B/A
A or ENTER to select “Program”.
Clear
3
D/B
B/A
A to select “Program Playback”
Press C/D
and press ENTER.
D to select Play Mode, then press
Press C/D
B/A
A or ENTER to select “Random”.
The Random Playback will start.
• If you set “Random” during playback mode,
Random playback will begin after the track that is
currently being played has ended.
• To resume normal playback, select Play Mode:
“Off” in step 2.
Note:
In playing back the Video CD with PBC, you can not set
Random playback.
24
2C01801A [E] P21-24
24
1/13/04, 5:05 PM
Changing angles/Title selection/DVD menu
TOP MENU
MENU
ANGLE
PLAY
ENTER
C/D/B/A
DVD
Changing angles
When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.
1
Press ANGLE during playback.
The current angle will appear.
2
Press ANGLE repeatedly until the desired angle
is selected.
1/9
Note:
Depending on the DVD, you may not be able to change the
angles even if multi-angles are recorded on the DVD.
DVD
Title selection
Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title.
1
Press TOP MENU during playback.
2
D/B
B/A
A to select the desired title.
Press C/D
Title menu appears on the screen.
3
Press ENTER or PLAY.
The playback of the selected title will
start.
PLAY
Note:
Depending on the DVD, you may not be able to select the title.
Depending on the DVD, a “title menu” may simply be called a
“menu” or “title” in the instructions supplied with the disc.
DVD
DVD menu
Some DVDs allow you to select the disc contents using the menu.
When you play back these DVDs, you can select the subtitle language and sound-track language, etc. using the menu.
1
Press MENU during playback.
The DVD menu appears on the screen.
• Press MENU again to resume
playback at the scene when you
pressed MENU.
2
D/B
B/A
A to select the desired item.
Press C/D
3
Press ENTER.
The menu continues to another
screen. Repeat steps 2 and 3 to set
the item completely.
Note:
Depending on the DVD, you may not be able to resume playback
from the scene point when you pressed the MENU button.
25
2C01801A [E] P25-31
25
1/13/04, 5:06 PM
Advanced playback
Changing soundtrack language/
Setting surround sound
AUDIO
B/A
DVD
VCD
Changing soundtrack language
You can select the language when you play a multilingual disc.
1
Press AUDIO during playback.
The current soundtrack language will
appear.
In case of Video CD playback
Audio type changes as follows each time you press AUDIO.
LR
Spatializer Off
L
Spatializer Off
R
Spatializer Off
2/8 Fra Dolby Digital
Spatializer Off
2
Press AUDIO repeatedly until the desired language is selected.
1/8 Eng Dolby Digital
Notes:
• If the desired language is not heard after pressing the
button several times, the language is not recorded on
the disc.
• Changing soundtrack language is cancelled when you
open the disc tray. The initial default language or available
language will be heard if the disc is played back again.
Spatializer Off
• The on screen display will disappear after a few
seconds.
DVD
VCD
CD
Setting surround sound
This DVD video player equipped with a “SPATIALIZER VIRTUAL SURROUND”. It can produce the effect of being in a
cinema or a concert hall.
1
During disc playback press AUDIO.
1/8 Eng Dolby Digital
Spatializer Off
2
To cancel Surround mode:
Follow the left steps 1~2, then press B or A to select the
“Off” position.
Note:
The “SPATIALIZER VIRTUAL SURROUND” is effective only
for the sound of disc.
Press B or A to select “On”.
1/8 Eng Dolby Digital
Spatializer On
• The on screen display will disappear after a few
Spatializer® 3-Dimensional Sound Processing provided by
Desper Products. Inc.
Certain audio features of this product manufactured under
a license from Desper Products, Inc., Spatializer® and the
circle-in-square device are trademarks owned by Desper
Products, Inc.
seconds.
26
2C01801A [E] P25-31
26
1/13/04, 5:06 PM
Subtitles/Karaoke playback
AUDIO
SUBTITLE
C/D/B/A
Subtitles
DVD
When playing back a disc recorded with subtitles, you
can select the subtitle language or turn the subtitle off.
1
Press SUBTITLE repeatedly during playback
until your desired language appears.
You can turn the vocal on or off recorded on the DVD
KARAOKE.
1
2
During DVD KARAOKE disc playback, press
AUDIO.
1/8 Eng Dolby Digital
1/8 Eng
To turn off the subtitle, press SUBTITLE until
“Off” appears.
Karaoke playback
Spatializer Off
2
Press C or D until the KARAOKE symbol (
appears.
)
1/8 Eng Dolby Digital
Off
Off
• If you play non-Karaoke disc, the KARAOKE
symbol ( ) does not appear.
• The on screen display will disappear after a
few seconds.
Notes:
• Depending on the DVD, you may not be able to change
subtitles, or to turn subtitles on or off.
• While playing a DVD, the subtitle may change when you
open or close the disc tray.
• In some cases, a selected subtitle language may not be
changed immediately.
3
Press B or A to select “On” or “Off”.
On : The primary vocal is output
when it is recorded on the disc.
Off : The primary vocal is not output.
• The on screen display will disappear after a
few seconds.
Notes:
• The vocal output feature is used during playback of Dolby
Digital (multi-channel) recorded DVD KARAOKE discs. This
feature allows you to turn off vocal audio tracks, or restore
them for background accompaniment.
• When playing Karaoke, connect appropriate audio equipment
such as an amplifier to the DVD video player.
27
2C01801A [E] P25-31
27
1/13/04, 5:06 PM
Advanced playback
Disc status/To turn off the PBC
1
DISPLAY
ENTER
DVD
VCD
CD
Disc status
VCD
With each press of DISPLAY, the status of the disc
will appear on the screen and change as follows.
To turn off the PBC
Press number button 1 in the stop mode, then
press ENTER.
DVD
00:34:56 01:12:33
00:34:56 01:12:33
1/99 Chapter 1/999
1/9
1/8 Eng Dolby Digital
1/32 Eng
Title
To make status display disappear, press DISPLAY
again.
Video CD
00:12
PBC
Track –/–
04:32
00:12
04:32
To make status display disappear, press DISPLAY
again.
Audio CD
34:56
71:33
Track 11/99
When you playback the CD disc, the status display
will appear on the screen and continue displaying.
28
2C01801A [E] P25-31
28
1/13/04, 5:06 PM
MP3/WMA/JPEG operation
This player can play back the MP3/WMA/JPEG-data which has been recorded on CD-R or CD-RW. To produce the MP3/WMA/
JPEG-data, you need a Windows-PC with CD-RW drive and a MP3/WMA/JPEG-encoding Software (not supplied).
The Apple-HFS-System can not be played.
MP3/WMA/JPEG CD information
Limitations on MP3/WMA/JPEG CD playback
• MP3/WMA/JPEG CD is the disc that is standardized by ISO9660, its file name must include 3-digits extension letters, “mp3”, “wma”, “jpg”.
• MP3/WMA/JPEG CD must be correspond to the ISO standardized files.
• This unit can read 200 files per disc. If one directory has more than 200 files, it reads up to 200 files, the
remaining files will be omitted.
• The unit is able to recognize up to a maximum of 50 directories per disc.
• MP3/WMA/JPEG CDs cannot be used for the purpose of recording.
• If the CD has both audio tracks and MP3/WMA/JPEG files, only audio tracks are played.
• It may take more than one minute for this unit to read MP3/WMA/JPEG files depending on its structure.
• Music recorded by “Joliet Recording Specification” can be played back, the file name is displayed (within 16
letters) on the screen. Long file names will be condensed.
• The music files recorded by “Hierarchical File System” (HFS) cannot be played.
Limitations on display
• The maximum number for display is 16 letters.
Available letters for display are the following:
capital or small alphabets of A through Z, numbers of 0 through 9, and _ (under score).
• Other letters than those above are replaced in hyphen.
Notes on MP3/WMA/JPEG files
To play back MP3/WMA/JPEG CD in the recorded order,
1. Use MP3/WMA/JPEG software that records data alphabetically or numerically.
2. Name each file including two-digit or three-digit number (ex. “01” “02” or “001” “002”).
3. Refrain from making too many sub-folders.
CAUTION:
• Some MP3/WMA/JPEG CDs can not be played back depending on the recording conditions.
• The CD-R/RW that has no music data or non MP3/WMA/JPEG files can not be played back.
Standard, sampling frequency, and the bit rate:
MP3 CD
MPEG-1 Audio
32kHz, 44.1kHz, 48kHz
32kbps ~ 320kbps (constant bit rate or variable bit rate)
The recommend recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps of
constant bit rate.
WMA CD
WMA version 7, and 8
32kHz, 48kbps
44.1kHz, 48kbps ~ 192kbps
48kHz, 128kbps ~ 192kbps
The file recorded by mono, 48kHz, 48 kbps is not available to this unit.
29
2C01801A [E] P25-31
29
1/13/04, 5:06 PM
Advanced playback
MP3/WMA/JPEG operation (continued)
0–9
TOP MENU
PLAY
STOP
ENTER
▲/▼/ /
MP3/WMA CD playback
CD
1
2
Place a disc on which MP3 or WMA files have
been recorded onto the disc tray.
Press STOP to end playback.
STOP
A file menu screen will appear on the screen.
A or ENTER to select folder.
Press B/A
-/72 --:--
CD-R
1
2
3
4
5
6
7
Pops
8
Japan
9
Bay Bridge
CLOSE MY EYES 10
DIVE TO BLUE 11
12
Honey
13
BLUE EYES
14
Blurry Eyes
flower
Lies and Truthwinter fall
Rain
Strawberry
Welcome party
Thailand
/0-9/Enter/Play Mode
3
5
D/B
B/A
A or Number buttons (0–9) to
Press C/D
select the desired file.
• The unit records the stopped point. “ ” appears on
the screen. Press PLAY to resume playback (from
the scene point).
• If you press STOP again or unload the disc, the unit
will clear the stopped point.
About file menu
Operation
Elapsed time
Media type
File number
Folder
• In case the folder includes more than 15 files, press
B or A to display next file list.
-/72 --:--
CD-R
1
2
3
4
5
6
7
Pops
8
Japan
9
Bay Bridge
CLOSE MY EYES 10
DIVE TO BLUE 11
12
Honey
13
BLUE EYES
14
Blurry Eyes
-/72 --:--
CD-R
15
16
flower
Lies and Truthwinter fall
Rain
Strawberry
Welcome party
Thailand
Pops
Mother
Hold Your Last
: Indicates MP3-file
: Indicates WMA-file
: Indicates JPEG-file
/0-9/Enter/Play Mode
/0-9/Enter/Play Mode
• When PLAY has been pressed after displaying the
file menu, or when the disc tray has been closed
using PLAY, playback begins automatically starting
from the first file. In this case, if the first file is an
MP3/WMA file, only MP3/WMA files are played back
in order. If the first file is a JPEG file, the first JPEG
file is played back.
4
/0-9/Enter/Play Mode/Menu
Press ENTER.
The selected file starts playing back.
Notes:
• The picture menu is displayed when the FUJICOLOR CD
or the Kodak Picture CD are played. To display the file
menu, press TOP MENU.
• In the case of a CD containing a mixture of MP3, WMA and
JPEG files, the files are played back by selecting them from
the file menu.
• MP3 or WMA file on the Kodak Picture CD is not recognized on this unit.
Notes:
• During MP3/WMA/JPEG-Playback, you can not use SEARCH,
A-B Repeat functions.
• You can use Repeat (Track or All), Random functions and
Program playback for MP3/WMA/JPEG CD Playback (see
pages 23 and 24).
• In the case of a CD containing a mixture of MP3, WMA and
JPEG files, the files are played back by selecting them from
the file menu.
30
2C01801A [E] P25-31
30
1/13/04, 5:06 PM
0–9
MENU
TOP MENU
ANGLE
PLAY
STOP
SKIP /
PAUSE
ENTER
▲/▼/ /
JPEG CD playback
1
2
Slide show playback
Place a disc on which JPEG files have been
recorded onto the tray.
A file menu screen will appear on the screen.
A to select folder.
Press B/A
-/36
CD-R
Collection
1
Pic-1
8
Pic-8
2
3
Pic-2
9
10
Pic-9
4
Pic-4
11
Pic-11
5
Pic-5
Pic-12
6
7
Pic-6
12
13
14
Pic-3
Pic-7
Pic-10
Pic-13
Pic-14
/0-9/Enter/Play Mode/Menu
3
D/B
B/A
A or Number buttons (0–9) to
Press C/D
select the desired file.
To display a picture menu, press MENU.
(To return to a file menu, press TOP MENU.)
Press B/A or C/D to select the desired file.
• To display next list, press SKIP / .
• When PLAY has been pressed after displaying
the file menu, or when the disc tray has been
closed after pressing PLAY, playback begins
automatically starting from the first file. In this
case, if the first file is a JPEG file, the first JPEG
file is played back. If the first file is an MP3/
WMA file, only MP3/WMA files are played back
in order.
4
The slide show enables you to view pictures (files) one
after another automatically.
Preparation:
• Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds” or “15 Seconds” (see page 36).
1
2
Select your desired starting file for the slide
show in the step 3 as left.
Press ENTER to start slide show from the
selected file.
• If you press PAUSE during the slide show, the slide
show stops temporary. “ 4 ” appears briefly on the
picture.
If the picture appears upside down or sideways,
press ANGLE repeatedly until it’s right side up.
”, “
”, “
” or “
” appears briefly
“
on the screen.
again to resume the slide
Press PLAY or SKIP
show.
• When the slide show playback finished the file list
appears.
• To stop the slide show, press STOP. The file list appears.
Press ENTER. The selected picture appears
on the screen.
Rotating an image
You can rotate an image by 90 degrees by pressing ANGLE during playback of the image.
“
”, “
”, “
” or “
” appears
briefly on the screen.
5
Press STOP to end playback.
The file menu appears on the screen.
If you want to watch the other file, repeat steps
3 ~ 4.
STOP
31
2C01801A [E] P25-31
31
1/13/04, 5:06 PM
Advanced playback
Selecting PROGRESSIVE scan
The progressive scan capability provides the highest resolution pictures with less
flicker and line structure.
If you are using the Component video jacks, but are connecting the DVD video
player to a standard (analog) television, set PROGRESSIVE to Off.
If you are using the Component video jacks for connection to a TV or monitor that
is compatible with a progressive scan signal, set PROGRESSIVE to On.
PLAY
PROGRESSIVE
DVD
VCD
Selecting PROGRESSIVE scan
Preparation:
• Connect to a TV equipped with component jacks.
• Turn ON the TV and set it to the corresponding video input
mode.
• Set the COMPONENT/S-VIDEO selector switch on the
rear panel to COMPONENT position.
1
Press PROGRESSIVE during stop mode.
On” will appear on the screen for
“
approx. 4 seconds.
There are two types of source content in pictures recorded in
DVD video discs: film content (pictures recorded from films
at 24 frames per second) and video content (video signals
recorded at 30 frames per second).
When the unit plays back a film source material, uninterlaced
progressive output signals are created using the original
information. When a video content is played back, the unit
interleaves lines between the interlaced lines on each to
create the interpolated picture and outputs as the progressive signal.
• The unit recognizes the picture
source (film or video) of the current
disc according to the disc
information.
2
Press PLAY to start playback.
PLAY
To select PROGRESSIVE scan Off
Press PROGRESSIVE during stop mode.
Off” will appear on the screen for approx. 4 seconds.
“
Notes:
• Some discs may not be played back with the progressive
scanning mode correctly because of the disc characteristics
or recording condition.
• If your TV does not accept the progressive scan format, the
picture will appear scrambled if you select progressive scan
output from the unit. In such a case, select PROGRESSIVE
scan Off.
• Once PROGRESSIVE scan on, all other video outputs are
disabled except component video outputs.
• You cannot make the progressive scanning mode active in
following cases.
– The disc is played back.
– The COMPONENT/S-VIDEO selector switch is set to
S-VIDEO position.
32
2C01801A [E] P32-37
32
1/13/04, 5:06 PM
Function setup
Customizing the function settings
You can change the default settings to customize performance
to your preference.
SETUP
ENTER
RETURN
C/D/B/A
DVD
VCD
CD
1
Setting procedure
Press SETUP during stop mode.
The following on-screen display
appears.
5
To make SETUP screen disappear, press
SETUP or RETURN.
Language Picture Sound Parental Other
/Enter/Setup/Return
2
Press B or A to select the desired section, then
press D or ENTER.
3
Press C or D to select the desired option.
4
Change the selection using C/D/B/A or ENTER,
by referring to the corresponding pages 35~37.
• Repeat step 3 and 4 to change
other settings.
• To select another operation, go
back to step 2.
33
2C01801A [E] P32-37
33
1/13/04, 5:06 PM
Function setup
Customizing the Function Settings (continued)
Setting details
Section
Option
Details
Language
Menu
Subtitle
Audio
To select the language of “Menu”, “Subtitle” and
“Audio” if their languages are recorded onto the
disc more than one language.
E.B.L.
To select On or Off for E.B.L. (Enhanced Black
Level).
35
Tv Screen
To select a picture size according to the aspect
ratio of your TV.
35
Display
To turn on or de-activate the operational status display on the screen.
36
JPEG Interval
To select a preferred setting for the slide show playback.
36
Select Files
To select a preferred file type for playing back a CD
containing a mixture of file types.
36
Dialogue
To select On or Off for DRC (Dynamic Range Control).
36
Password
Input 4-digit password to set the parental level.
Parental
To select a preferred parental level for the parental
setting.
OSD language
To select a preferred language for on screen display.
Picture
Sound
Page
37
Parental
Other
34
2C01801A [E] P32-37
35
34
1/13/04, 5:06 PM
37
Picture
Language
Language Picture Sound Parental Other
Menu
Subtitle
Audio
Language Picture Sound Parental Other
English English
Automatic Francais
English Espanol
Other
Off
E.B.L.
Tv Screen
/Enter/Setup/Return
4:3
Display
On
JPEG Interval
Off
Select Files
All
/Enter/Setup/Return
E.B.L.
Menu, Subtitle, Audio
You can select the language of “Menu”, “Subtitle” and
“Audio” if more than one languages are recorded onto
the disc.
English, Francais, Espanol:
The selected language will be heard or seen.
Other:
Other language can be selected (see the
“Language code list” on page 39).
Original: (Audio)
The unit will select the first priority language of
each disc.
Automatic: (Subtitle)
• The unit will automatically select the same
language in the AUDIO setting.
• When the unit selects the same language as
the AUDIO, the subtitles will not appear during
playback.
• When you do not use the same language as
the AUDIO, the subtitles will appear during
playback.
Off: (Subtitle)
Subtitles do not appear.
Note:
If the selected language is not recorded on the disc, the
first-priority language is selected.
To select the black level of playback pictures, set your
preference and monitor’s ability.
On: Enhanced grey scale (0 IRE cut off)
Off: Standrard grey scale (7.5 IRE cut off)
Tv Screen
You have the following screen sizes to choose from:
4:3
Letter box:
Select this mode when connecting to a conventional TV. When playing back a wide screen-DVD
disc, it displays the wide picture with black bands
at the top and bottom of screen.
4:3
Pan scan:
It displays the wide picture on the whole screen
with left and right edges automatically cut off.
16:9
Wide:
Select this mode when connecting to a wide-screen
TV. A wide screen picture is displayed full size.
Note:
If the DVD disc is not formatted in the pan & scan style,
it displays 4:3 style.
35
2C01801A [E] P32-37
35
1/13/04, 5:06 PM
Function setup
Customizing the Function Settings (continued)
Setting details
Display
Sound
On screen display can be switched on or off when you
press the buttons.
Language Picture Sound Parental Other
Dialogue
On: On screen displays appear when you press
the buttons (factory setting).
Off: On screen displays do not appear when you
press any buttons.
On : DRC(TV)
Off : DRC(Std)
/Enter/Setup/Return
Dialogue
JPEG Interval
You can continuously play back all JPEG files automatically.
After the setting below, start playing the disc on which
JPEG files have been recorded.
Off:
Plays back one file at a time.
5 Seconds:
Plays back images in the form of a slide show at
5 second intervals.
10 Seconds:
Plays back images in the form of a slide show at
10 second intervals.
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound for
your equipment.
On: Loud sound such as explosion or similar
is toned down slightly when played back.
This makes it suitable for when it is connected to a stereo.
Off: It plays back at the recording level on the
disc.
Notes:
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
15 Seconds:
Plays back images in the form of a slide show in
15 second intervals.
Select Files
When playing back a CD containing a mixture of MP3,
WMA and JPEG files, only MP3/WMA or JPEG files can
be displayed on the file menu.
All:
Displays all files.
Music Only:
Displays only MP3/WMA files.
Pictures Only:
Displays only JPEG files.
36
2C01801A [E] P32-37
Off
36
1/13/04, 5:06 PM
To change the parental level
Parental
Language Picture Sound Parental Other
Password
Parental
0
Off
9/Clear
/Enter/Setup/Return
Parental control setting
Some discs are specified not suitable for children.
Such discs can be limited not to play back with the unit.
1) Press C or D to select “Parental”, then press B
or A until the level you require appears.
• Level Off:
The parental control setting does not
function.
• Level 8:
All DVD software can be played back.
• Level 1:
DVD software for adults cannot be
played back.
Select from the level 1 to level 8. The limitation will
be more severe as the level number is lower.
2) Press C or D to select “Password”.
Press Number buttons (0–9) to input a 4-digit
password. Be sure to remember this number!
• If you input a wrong number, press CLEAR.
3) Press ENTER to store the password.
Note: Now the rating is locked and the setting can
not be changed unless you enter the correct pass
word.
1) Press C or D to select “Password”.
2) Press Number buttons (0–9) to enter the password
you have stored.
3) Press ENTER.
• The rating is now unlocked.
4) Press C or D to select “Parental”, then press B
or A to change the parental level.
5) Press C or D to select “Password”, then press
Number buttons (0–9) to enter the password.
Note: You can change the password if you want.
6) Press ENTER.
Now the parental level is changed and locked.
If you forget the password...
1. Press OPEN/CLOSE to open the disc tray.
2. Remove the disc.
3. Press OPEN/CLOSE again to close the disc tray.
“No Disc” appears on the screen.
4. While holding STOP down on the front panel, press 7
on the remote control. “PASSWORD CLEAR” appears
on the screen.
5. Enter a new password again.
Notes:
• Depending on the discs, the unit may not be able to limit
playback.
• Some discs may not be encoded with specific rating level
information though its disc jacket says “adult.”
For those discs, the parental control feature will not work.
Other
Notes:
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating
level information though its disc jacket says “adult.” For
those discs, the age restriction will not work.
Language Picture Sound Parental Other
OSD Language English
English
Francais
Espanol
/Enter/Setup/Return
OSD Language
The setup language can be selected.
English: To display OSD language is English.
Francais: To display OSD language is Francais.
Espanol: To display OSD language is Espanol.
Note:
If each setup (pages 35~37) has been completed, the unit
can always be worked under the same conditions (especially with DVD discs).
Each setup will be retained in the memory even if you turn
the power off.
37
2C01801A [E] P32-37
37
1/13/04, 5:06 PM
Function setup
Temporary disabling of rating level by DVD disc
OPEN/CLOSE
0–9
Depending on the DVD disc, the disc may try to temporarily cancel the rating
level that you have set.
It is up to you to decide whether to cancel the rating level or not.
PLAY
▲/▼
ENTER
RETURN
1
Load a DVD disc and press PLAY or OPEN/
CLOSE on the unit (see page 18).
4
Enter the password with Number buttons (0–9).
Then press ENTER.
If you interrupt the entering, press
RETURN.
PLAY
Please enter the
4 - digit password
Enter/0
2
If the DVD disc has been designed to temporarily
cancel the Rating level, the screen which follows
the “Reading” screen will change, depending on
which disc is played. If you select “YES” with the
ENTER key, “Your disc exceeds the parental
control level#.” screen will then appear.
Reading
Playback will commence if the entered password was correct.
Your disc exceeds
the parental control level#.
Parental Control Level
Cancel Picture
/Enter/Return
3
5
Note:
This temporary cancellation of rating level will be kept until the
disc is ejected.
When the disc is ejected, the original rating level will be set again
automatically.
If you wish to cancel the set rating level temporarily, select “Parental Control Level” with
or
,
then press ENTER. If the 4-digit password at step
2 on page 37 has been set, the password entering
screen will appear as shown in step 4.
Alternatively, if the password has not been set,
playback will commence. If you don’t know (or have
forgotten) the password, select “Cancel Picture”.
The setting screen will disappear. Press OPEN/
CLOSE to remove the disc.
38
2C01801A [E] P38-41
9/Clear/Return
38
1/13/04, 5:06 PM
Language code list
Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” (see pages 35).
Language Name Code
Language Name Code
Language Name Code
Language Name Code
Abkhazian
1112
Fiji
1620
Lingala
2224
Singhalese
2919
Afar
1111
Finnish
1619
Lithuanian
2230
Slovak
2921
Afrikaans
1116
French
1628
Macedonian
2321
Slovenian
2922
Albanian
2927
Frisian
1635
Malagasy
2317
Somali
2925
Amharic
1123
Galician
1722
Malay
2329
Spanish
1529
Arabic
1128
Georgian
2111
Malayalam
2322
Sundanese
2931
Armenian
1835
German
1415
Maltese
2330
Swahili
2933
Assamese
1129
Greek
1522
Maori
2319
Swedish
2932
Aymara
1135
Greenlandic
2122
Marathi
2328
Tagalog
3022
Azerbaijani
1136
Guarani
1724
Moldavian
2325
Tajik
3017
Bashkir
1211
Gujarati
1731
Mongolian
2324
Tamil
3011
Basque
1531
Hausa
1811
Nauru
2411
Tatar
3030
Bengali; Bangla 1224
Hebrew
1933
Nepali
2415
Telugu
3015
Bhutani
1436
Hindi
1819
Norwegian
2425
Thai
3018
Bihari
1218
Hungarian
1831
Oriya
2528
Tibetan
1225
Breton
1228
Icelandic
1929
Panjabi
2611
Tigrinya
3019
Bulgarian
1217
Indonesian
1924
Pashto, Pushto 2629
Tonga
3025
Burmese
2335
Interlingua
1911
Persian
1611
Turkish
3028
Byelorussian
1215
Irish
1711
Polish
2622
Turkmen
3021
Cambodian
2123
Italian
1930
Portuguese
2630
Twi
3033
Catalan
1311
Japanese
2011
Quechua
2731
Ukrainian
3121
Chinese
3618
Javanese
2033
Rhaeto-Romance2823 Urdu
3128
Corsican
1325
Kannada
2124
Romanian
2825
Uzbek
3136
Croatian
1828
Kashmiri
2129
Russian
2831
Vietnamese
3219
Czech
1329
Kazakh
2121
Samoan
2923
Volapük
3225
Danish
1411
Kirghiz
2135
Sanskrit
2911
Welsh
1335
Dutch
2422
Korean
2125
Scots Gaelic
1714
Wolof
3325
English
1524
Kurdish
2131
Serbian
2928
Xhosa
3418
Esperanto
1525
Laothian
2225
Serbo-Croatian 2918
Yiddish
2019
Estonian
1530
Latin
2211
Shona
2924
Yoruba
3525
Faroese
1625
Latvian, Lettish 2232
Sindhi
2914
Zulu
3631
39
2C01801A [E] P38-41
39
1/13/04, 5:06 PM
Function setup
TV
POWER
INPUT SELECT
Multi brand remote control
The remote control can be compatible with various brands of TV by
setting their control codes. The TOSHIBA code has initially been set
to control TOSHIBA TVs.
100
DISPLAY
0–9
PROGRAM
ENTER
CH+/–, VOL+/–
Setting TV control codes
1
Press TV to set the remote control operating
your TV.
2
While holding down PROGRAM enter the two
digits of your TV's brand code (listed below)
using Number buttons (0–9), then release
PROGRAM.
Point the remote control at your TV and use each
button listed below to make sure that your TV is
operated correctly.
POWER
CH +/–
VOL +/–
INPUT SELECT
Number buttons
(0–9)
100
DISPLAY
ENTER
To turn the TV on or off.
To select TV channels in the upper
or lower direction.
To adjust the sound level.
To select an external source such
as a VCR.
To select TV channels. When selecting channels 1 to 9, first enter 0 and
then desired number.
To substitute for 100 channel key.
To turn on or off TV’s screen display.
To use for the TV’s ENTER key.
Important
Some TV’s may not respond to all the operations left, or
may not be operated at all with this remote control. In
this case, operate your TV with its own remote control.
Table of TV brand codes
Brand name
of your TV
Toshiba
Bell & Howell
Carver
Celebrity
Citizen
Curtis Mathes
Dumont
Electro band
Emerson
Fisher
GE
Gibralter
Goldstar
Hallmark
Hitachi
Infinity
JBL
JCB
JVC
LXI
Magnavox
Marantz
Megatron
Memorex
MGA
Midland
Mitsubishi
Motorola
MTC
NAD
Nikko
Optimus
Optonica
Panasonic
Brand Code
01
09
10
03
12
09, 12
14
03
09,11
09
02, 07, 11
14
11
11
06
10
10
03
05
01, 02, 09, 10, 11
10
10
06, 11
04, 09, 11
04, 11
02,07, 14
04, 11
08
12
01, 11
11
09
08
07, 10, 15
Notes:
• For some brands, several control codes (brand codes) are allocated. Try each of them until the buttons work on your TV.
• If you replace the remote control’s batteries, set the brand code
again.
40
2C01801A [E] P38-41
40
1/13/04, 5:06 PM
Brand name
of your TV
Penney
Philco
Philips
Pioneer
Princeclub
Prism
Proscan
Proton
Pulser
Quasar
Radio Shack
RCA
Realistic
Runco(NEC)
Samsung
Sanyo
Scotch
Scott
Sears
Sharp
Sony
Soundesign
Supreme
Sylvania
Tandy
Technics
Techwood
Teknika
TMK
Victor
Vidikron
Vidtech
Wards
Zenith
Brand Code
01, 02, 07, 11, 12
10
10
16
12
07
02
11
14
07, 15
13
02
09, 11, 13
14
11, 12
09
11
11
01, 02, 09, 10, 11
08, 13
03
11
03
10
08
07, 15
07
04,10,12
11
05
10
11
10, 11,13
14
Others
Troubleshooting guide
Check the following guide for the possible cause of a problem before contacting service.
Page
Symptom
Cause
Correction
No power.
• The power plug is disconnected.
• Connect the power plug securely into the
wall outlet.
14
No picture.
• The TV is not set to receive DVD signal
output.
• Select the appropriate video input mode
on the TV so the picture from the DVD
video player appears on the TV screen.
–
• The video cable is not connected securely.
• Connect the video cable securely into the
14, 15
appropriate jacks.
• The COMPONENT/S-VIDEO selector is
not set correctly.
• Set the COMPONENT/S-VIDEO selector
to the appropriate position.
• The PROGRESSIVE scan is On through
the unit is connected to a TV via the
VIDEO out or the S-VIDEO out jack.
• Set the PROGRESSIVE scan Off.
• The equipment connected with the audio
cable is not set to receive DVD signal
output.
• Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD video player.
–
• The audio cable is not connected securely.
• Connect the audio cable securely into
the appropriate jacks.
14~17
• The audio receiver or TV is turned off.
• Turn on the equipment connected with
the audio cable.
–
• The unit is in the advanced playback mode.
• Resume the normal playback.
• The disc is dirty.
• Eject the disc and clean it.
7
• It is in fast forward or fast reverse
playback.
• Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
–
Brightness is unstable or
noises are present in the
playback pictures.
• The effect of copy protection.
• Connect the DVD video player directly to
the TV. Avoid connecting the DVD video
player to a VCR or TV/VCR combination.
14
The DVD video player does
not start playback.
• No disc is inserted.
• Insert a disc.
18
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc
type and color system.)
8
• The disc is placed upside down.
• Place the disc with the playback side
down.
18
• The disc is not placed within the guide.
• Place the disc correctly inside the guide
on the disc tray.
18
• The disc is dirty.
• Clean the disc.
• The parental lock function is set.
• Cancel the parental lock function or
change the parental lock level.
•
• The function is prohibited with the unit or
the disc.
8
No picture, or the screen is
blurred or divided into two
parts.
No sound.
The playback picture has
occasional distortion.
appears on the screen.
14, 15
32
20
7
37
Playback does not follow the
course of the disc’s program.
• It is in the mode of repeat playback,
program playback, etc.
• These operations may prevent a proper
progress of the contents.
–
Buttons do not work.
• Power supply fluctuations or other
abnormalities such as static electricity may
interrupt correct operations.
• Turn the power on or off with ON/
).
STANDBY (
Or disconnect the power plug and insert
it into the wall outlet again.
–
• The TV button is pressed.
• Press the DVD button to operate the DVD.
18
• The remote control is not pointed at the
remote sensor of the DVD video player.
• Point the remote control at the remote
sensor of the DVD video player.
13
• The remote control is too far from the DVD
video player.
• Operate the remote control within about
7 m.
13
• The batteries in the remote control are
exhausted.
• Replace the batteries with new ones.
13
The remote control does not
work properly.
41
2C01801A [E] P38-41
41
1/13/04, 5:06 PM
Others
Specifications
DVD Video Player
Power supply
120 V AC, 60 Hz
Power consumption
Operation : 10 W
Standby : 3 W
Mass
4.4 lbs (2.0 kg)
External dimensions
Width : 16 - 15/16 inches (430mm)
Height : 2 - 5/16 inches (59mm)
Depth : 8 - 1/8 inches (206mm)
Signal system
Standard NTSC
Pickup
CD :
Wavelength: 775 - 815 nm
Maximum output power: 0.5 mW
DVD : Wavelength: 650 - 666 nm
Maximum output power: 2.0 mW
Frequency response
DVD : 4 Hz - 22 kHz
CD : 4 Hz - 20 kHz
Harmonic distortion
0.008 %
Wow and flutter
Below measurable level
Operating conditions
Temperature: 5 °C to 40 °C, Operation status: Horizontal
Outputs
Video output
1.0 V (p-p), 75 Ω, negative sync., pin jack x 1
S video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1
(C) 0.286 V (p-p), 75 Ω
Component video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., pin jack x 1
(PB)/(PR) 0.7 V (p-p), 75 Ω, pin jack x 2
Audio output (DIGITAL COAXIAL)
0.5V (p-p), 75 Ω, pin jack x 1
Audio output (DIGITAL OPTICAL)
Optical connector x 1
Audio output (ANALOG)
–12 dBm, 1k Ω, pin jacks (L, R) x 1
COMPONENT/S-VIDEO selector
Slide switch x 1
Supplied Accessories
Audio/video cable ................................................. 1
Remote control (SE-R0121) ................................. 1
Batteries (AAA) ..................................................... 2
• Designs and specifications are subject to change without notice.
42
2C01801A [E] P42-BACK
42
1/13/04, 5:06 PM
LIMITED WARRANTY DVD VIDEO PLAYER
Toshiba America Consumer Products, L.L.C. (“TACP”), Toshiba Hawaii (“THI”) and Toshiba Canada Limited (“TCL”) make the
following limited warranties. These limited warranties extend to original purchaser or any person receiving this set as a gift
from the original purchaser and to no other purchaser or transferee.
Limited Ninety (90) Day Warranty
TACP/THI warrant this product against defects in materials
or workmanship for a period of ninety (90) days after the
date of original retail purchase. During this period, TACP/
THI will repair or replace a defective product or part, at their
option, with a new or refurbished product or part without
charge to you. You must deliver the entire product to a
TACP/THI Authorized Service Station. You are responsible
for all transportation and insurance charges for the unit to
and from the Authorized Service Station. If you live in the
U.S.A. you may, at your option, return your DVD Unit to:
Toshiba America Consumer Products L.L.C.
Returns Center
1420C Toshiba Dr.
Lebanon, TN 37087
Upon receipt we will, at our option, exchange the DVD Unit
with a new or refurbished unit. Canadian consumers are
requested to contact TCL. In Hawaii consumers are
requested to contact THI.
Limited One (1) Year Warranty
TACP/THI further warrant the parts in this product against
defects in materials or workmanship for a period of one (1)
year after the date of original retail purchase. During this
period, TACP/THI will repair or replace a defective product
or part, at their option, with a new or refurbished product or
part without charge to you, except that if a defective part is
replaced after ninety (90) days from the date of the original
retail purchase you pay labor charges involved in the
replacement. You must also deliver the entire product to a
TACP/THI Authorized Service Station. You are responsible
for all transportation and insurance charges for the unit to
and from the Authorized Service Station. If you live in the
U.S.A. you may, at your option, return your DVD Unit to:
Toshiba America Consumer Products L.L.C.
Returns Center
1420C Toshiba Dr.
Lebanon, TN 37087
Upon receipt we will, at our option, exchange the DVD Unit
with a new or refurbished unit. Canadian Consumers are
requested to contact TCL. In Hawaii consumers are
requested to contact THI.
Rental Units
The warranty for rental units begin with the first rental or
thirty (30) days from the date of shipment to the rental firm,
whichever comes first.
Commercial Units
Products sold and used for commercial use have a limited
ninety (90) day warranty for all parts and labor.
Owner’s Manual
You should read the owner’s manual thoroughly before
operating this product. You should complete and mail the
enclosed Demographic card within ten (10) days after you,
or the person who has given you this product as a gift,
purchased this product. This is one way to enable TACP to
provide you with better customer service and improved
products. Failure to return the card will not affect your rights
under this warranty.
Your Responsibility
The above warranties are subject to the following
conditions:
(1) You must retain your bill of sale or provide other proof
of purchase.
(2) You must notify a TACP/THI/TCL /Authorized Service
Station within thirty (30) days after you discover a
defective product or part.
(3) All warranty servicing of this product must be made by a
TACP/THI/TCL Authorized Service Station.
(4) U.S.A. warranties are effective only if the product is
purchased and operated in the Continental U.S.A. or
Puerto Rico.
(5) Labor service charges for set installation. Set up,
adjustment of customer controls and installation or
repair of antenna systems are not covered by this
warranty. Reception problems caused by inadequate
antenna systems are your responsibility.
(6) Warranties extend only to defects in materials or
workmanship as limited above and do not extend to any
product or parts which have been lost or discarded by
you or to damage to products or parts caused by
misuse, accident, damage caused by Acts of God, such
as lighting or fluctuations in electric power, improper
installation, improper maintenance or use in violation of
instructions furnished by us; or to units which have
been altered or modified without authorization of TACP/
THI/TCL or to damage to products or part thereof which
have had the serial number removed, altered, defaced
or rendered illegible.
(7) Should you elect to return your DVD Unit to TACP after
the ninety (90) days and within one (1) year, or after the
warranty period has expired: Call (800)-631-3811 to
receive information concerning an exchange price.
Payment must be enclosed with product in the form of a
certified check or money order including reason for
return.
(8) Physically damaged DVD Units are not acceptable for
repair or exchange whether in or out of warranty and
will be returned as received.
(Continued)
43
2C01801A [E] P42-BACK
43
1/13/04, 5:06 PM
LIMITED WARRANTY DVD VIDEO PLAYER (continued)
How to Obtain Warranty Service
(1) Refer to the troubleshooting guide in your owner’s manual. This check list may solve your problem.
(2) In the U.S.A., only call the TACP toll free number 800-631-3811, or if in Hawaii or Canada see listing below within (30)
days after you find a defective product or part.
(3) Arrange for the delivery of the product to the TACP/THI/TCL Authorized Service Station or TACP Return Center.
Products shipped to the Service Station must be insured and safely and securely packed, preferably in the original
shipping carton, and a letter explaining the defect and also a copy of the bill of sale or other proof of purchase must be
enclosed.
In the Continental United States contact:
Toll Free
800-631-3811
In Hawaii contact:
Toshiba Hawaii Inc.
327 Kamakee Street
Honolulu, HA 96814
(808)-521-5377
In Canada contact:
Consumer Electronics Group
191 McNabb Street
Markham, Ontario L3R 8H2
(905)-470-5400
Consumer Electronics Group
22171 Fraserwood Way
Richmond, B.C. V6W 1J5
(604)-303-2500
Consumer Electronics Group
18050 Trans canada
Kirkland, Quebec H9J 4A1
(514)-390-7766
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are
expressly limited to the duration of the limited warranties set forth above. With the exception of any warranties implied by state
law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees, agreements and
similar obligations of manufacturer or seller with respect to the repair or replacement of any parts. In no event shall TACP/THI
be liable for consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in
any manner whatsoever. The time within which an action must be commenced to enforce any obligation of TACP/THI arising
under the warranty or under any statute, or law of the United States or any state thereof, is hereby limited to ninety (90) days
from the date you discover or should have discovered, the defect. This limitation does not apply to implied warranties arising
under state law.
This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Some
states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or
limitation of incidental or consequential damages, so the above provisions may not apply to you.
ATTENTION CANADIAN CONSUMERS:
Canadian consumers are requested to complete the special Canadian “Warranty Registration Form” enclosed, and forward
this completed form with a copy of bill of sale to TOSHIBA OF CANADA to “Register and Validate” their warranty. Product
must be purchased from an Authorized Canadian Dealer. Products purchased in the U.S.A. and used in Canada are not
covered by these warranties.
IMPORTANT: PACKING AND SHIPPING INSTRUCTION
When you send the product to a Service Station, you must use the original carton box and packing material, then insert the
original carton box containing the unit into another carton using more packing material.
04/01 U
2C01801A [E] P42-BACK
Printed in Thailand
44
1/13/04, 5:06 PM