Inspection Camera Instruction Manual
AV7810
Please read this instruction manual carefully before using the product.
Main Part List(缺组成部分编号示意图)
1.主按键功能 Button Functions
回放
菜单/确认
(左1)Playback
(左2)Menu/Ok
(左6)Photo/Video
向上
(左3)Up
向下
放大/缩小 拍照/摄影
(左4)Down
(左5)Amplification/Minification
(这张图片上的Amplification应该改为Amplification/Minification)
2.电源开关
Power Switch
 操控手柄电源开关
Switch of the Hand grip
 显示器电源开关
Monitor’s Power on/off Button
 LED灯调节开关 LED Brightness Adjustment Switch
3.Battery Compartment
4.Female Connector and Male Connector
5.复位键(机身底部孔状)Reset Indicator (A Tiny Hole at the Button Side)
Accessory List
(配件图片)
1.Mirror(Provided for 7810B,7810C,7810D Only)
2.Hook(Provided for 7810C,7810D Only)
3.Magnet(Provided for 7810C,7810D Only)
4.USB Data Cable
5.Power Adapter
6.AV Output Wire
7.Instruction Manual
Table of Content
1. Safety Instructions……………………………………3(页码待编辑后修改)
2. In The Package………………………………………. 3
3. Information About The Product………..……………4
4. Before First Use……………………………………… 4
5. Installation………………………………………….....4
6. Operation ………………………………...................4
7. Disposal……………………………………………….10
8. CE Declaration of Conformity….........................10
9. FAQ………………………………………………
10. Warranty………………………………………………
11. Product Specification……………………………………
12. Product Utility……………………………………
Safety Instructions
• Read this manual carefully before use.
• May not be used by children under 12 years of age.
• Do not use the endoscope with highly flammable products or in explosive spaces such as with flammable gas
or dust. Use of the endoscope can cause explosion.
• Do not use the endoscope near corrosive chemical substances. These can damage the endoscope’s protective
coating and affect working life and quality.
• When using the endoscope in dangerous conditions, always wear protective clothing such as goggles and a
helmet.
• Do not pour any liquid in the appliance.
• Do not use the appliance for medical purposes.
• Do not use the appliance as a hammer or drop it.
• Clean the appliance with a dry cloth.
• Clean the lens with a slightly moist cloth Do not use corrosive substances.
• Always remove the batteries when cleaning
• When replacing the batteries always use the same batteries and replace both batteries.
• Save the appliance in a dry and ventilated space.
• Do not use the appliance in temperatures above 60 °C
• Do not bend the probe more than 150 °.
• Do not use the camera if condensation forms inside the lens. Let the water evaporate before using again.
In the Package
Qty
1
1
1
1
1
1
1
1
Description
Endoscope Main Unit
Instruction Manual
USB Data Cable
Power Adapter
AV Output Wire
Mirror(Provided for 7810B,7810C,7810D Only)
Hook(Provided for 7810C,7810D Only)
Magnet(Provided for 7810C,7810D Only)
Check all parts for transport damage. In case of damage contact your dealer immediately.
Check the package for completeness. Inform your dealer about missing parts immediately.
Information About The Product
The product is designed as a remote inspection device. It can be used to look into tight spots and beam back
real-time video to its LCD monitor. Typical application circumstance include HVAC, termite and other insect
or building inspections, cable route, automotive/boat/aircraft inspections etc.
Before First Use
Remove all packaging materials and check the scope of delivery for completeness. Make certain every object in
the package has been noticed.
Installation
Please install the batteries before using the product, choose the accessory according to the
actual situation. Steps of installation is listed below:
1. Press the monitor against the host.
2. Push the monitor until tightly fixed.
3. Using a screwdriver, remove screw and cover. If there is no screw, slide to remove the cover.
4. Take out the battery compartment and insert 4 new AA (1.5 V) batteries into the proper slots within it. Proper
battery orientation is indicated on the battery compartment.
5. Reinstall the battery compartment.
6. Reinstall the battery cover.
7. Connect the probe tube.
Operation
Switching On/Off
Before using the unit for the first time:
● Ensure the time and date have been set.
● Ensure the SD card is inserted.
Press the ON/OFF button to switch the device on.
The camera image will appear on the screen.
To switch the device off, press the ON/OFF button
Camera Illumination
The inspection camera is equipped with a dimmable LED light in the camera head. Its brightness can be
adjusted.
Press trigger button in the handle to adjust the LED Lamps brightness (7 levels), press it two seconds to turn off
LED Lamps.
Zoom function
Press
Magnification Button to enlarge the image(8 times) on screen.
Menu Options and Settings
Power on the endoscope, press Menu/OK Button to enter the menu setting,
press Button
two seconds to enter menu page, press
Up/Down Button select the menu items and then
press
Menu/OK to set or confirm the settings, then press
menu setting, come back to operating mode.
Menu/OK Button two seconds to quit the
Language Selection
Allows the language to be set for the menu functions.
Use the
Up/Down Button to select from the language available.
Date/Time
Use the
Up/Down Button to edit the time and date.
Camera & Video Operation
Inserting SD card.
Before using the camera or video function an SD card must be inserted into the card slot.
Note:- Card must be inserted with contacts facing upwards.
Then screen will then show the SD card icon.
Snapshot & Video Recording
Press
Photo/Video Button two seconds to convert Snapshot or Video Recording Mode.then press
Button to start/stop recording video or capture picture.
Press the camera button to take a picture.
Image Management
Press
Playback Button two seconds to enter Play Mode. Press
videos, then press
Button to browse photos or play videos. Press
Playback
Press
Playback Button two seconds for playback of photos/videos.
Transferring files to a computer
(这张图片是其他公司的产品,请做张类似的)
Connect USB cable between mini USB port and computer.
Switch on camera, computer will then detect unit as a removable disk.
Files can now be copied over to computer as required
Disposal
Packaging
Up/Down Button select photos or
to edit or delete a photo/video.
The packaging can be recycled. Put the packaging materials to appropriate collection containers
only.
Device
After the device has reached the end of its service life, follow the legal regulations concerning
the disposal of electrical devices. Take the device to your retailer or to an appropriate public
collection point, where it will be recycled.
Do not put your used batteries, nickel cadmium, rechargeable round cell or starter batteries with
your household rubbish. Take them to an appropriate disposal/collection site.
CE Declaration Of Conformity
This product complies with the EU CE guidelines and directives. Electromagnetic Compatibility
2004/108/EEC RoHS Directive 2011/65/EU Annex ll;recasting 2002/95/EC.
FAQ
Q1: What's length of the snake tube?Is the snake tube detachable?
A1: The snake tube is detachable, Max Length can be extended 20m.
Q2: How long can the endoscope work?
A2: It depends on the battery situation, a full power lithium battery can work for 1-3 hours, 4 AA battery
works 1-2 hour.
Q3:How much space does it support?
A3: The endoscope supports 32GB (Max).
Q4:Can I use it in dark place?Is it waterproof?
A4:Yes,it has 4 LEDs,7 levels brightness adjustable;IP67 waterproof as well as oil, acid, alkali resistant.
Q5:How long of warranty?
A5: The warranty period is 12 months(since the date of purchase).
Warranty
The whole machine one year free warranty from the date of purchase. After the warranty period, According to
the paid service fee standards provide paid services. The warranty terms will take effect since the date of
purchase.
The warranty is only for products from our company.
The following situations are not included:
1. The main engine or parts of the product beyond the warranty period;
2.The failure or damage caused by failure to specification requirements,operator errors and improper storage
and maintenance of unexpected factors or human factors.
3.The failure or damage are caused by the installation, repair, change, addition or dismantlement by the
institutions and staff who are not authorized by the Company.
4.The failure or damage caused by a natural disaster.
5.Normal and reasonable consumption or damage as well as the resulting damages.
6. The failure or damage are caused by other problems instead of the quality problem of the Company’s
machines (including parts).
When a machine breaks down, please send both faulty machine and the warranty card directly to the company,
while the round-trip post fee shall be borne by users themselves.
The Company will maintain or replace the parts as per the fault condition, while the replaced parts shall be
owned by the Company.
Please note that the warranty period of the original product shall not be extended due to maintenance or
replacement, while the warranty period for such breakdown maintenance shall be 2 months.
If any other service needs beyond the standard range of this warranty services, please choose the company’s
other paid services.
In addition, the Company does not assume to take delivery costs and risks of products. Please contact local
shops, dealers or visit our website if you have any question.
The company reserves the Right Of Final Interpretation of above Warranty Clauses.
Product Specification
Model
Image Sensor
Wireless Inspection Camera
CMOS Sensor
320(H)x240(V)(NTSC) ; 720(H)x625(V)(P) / 720(H)x525(V)(N);
Effective Pixel
720(H)x576(V)(P)/712(H)x480(V)(N)
Focus distance
30mm-80mm
View angle
60 degree Fov(D)
Probe diameter
Φ3.9 / Φ5.5 / Φ9.0 / Φ10 / Φ17 mm;
Probe tube length
1m standard length( up to 20m)
LED illumination
2/4 lamps, illumination can be adjustable in 7 levels
Host
Screen
3.5” TFT LCD QVGA 320 x 240 16.7M color
Signal Transmission
2.4G Wireless Video Transmission,Wired Video Transmission
Photo format:JPG \BMP \JPEG
Record and Photograph Video Format:AVI
Memory card:capacity of 32G mini SD/TF card
Input Voltage
110-220V
Output Voltage
5V-2A
Screen Battery
Built-in Li-battery 1200mAh 3.7V
Working Voltage
5V
Working Current
600MA/H
Handle Battery
4X AA Alkaline Battery
Product Utility