U010 Abbreviated instruction - CITIZEN WATCH Global Network

U010 Abbreviated instruction
English
•To see details of specifications and operations, refer to the instruction manual:
U010 instruction manual
Setting the time of the digital section
Component identification
Digital display 2
Minute hand
•Press button M to cancel setting of the time of the digital section.
•The setting is automatically canceled in about 2 minutes without any operation
during the setting.
1. Press and release the upper left button M repeatedly to change
the mode to “Time”.
2. Press and release the lower left button B repeatedly to
indicate an area name you want on the digital display 2.
Button M
Hour hand
Crown
Second hand
Digital display 1
Button B
Button A
• For area names, refer to the table on “Using the world time”.
3. Press and hold the lower left button B for about 2 seconds.
[SUM] and [On] or [OF] starts blinking and the time becomes adjustable.
• The blinking part is the target to adjust.
4. Press and release the lower left button B repeatedly to change
the target to be set.
• Each time you press button B, the target changes as follows:
•Actual appearance may differ from the illustration.
•Refer also to our web page for detail of usage of the scale and bezel on the watch.
(http://www.citizenwatch-global.com/support/pdf/enhanced/e.pdf)
Normal time
indication
Summer time
Second
12/24-hour basis
Hour
Minute
Changing the mode
This watch features seven different modes (functions): “Time”, “Calendar”, “Alarm”,
“Chronograph”, “Timer”, “Zone Setting” and “Shutter mode”.
1. Press and release the upper left button M repeatedly.
Each time you press the button, the mode changes as below:
“Time”
“Calendar”
“Alarm”
5. Press and release the lower right button A to adjust the target.
• Press button A in accordance with a reliable time source when setting the
second.
• Pressing and holding button A changes indication continuously when
setting the minute and the hour.
• “A” or “P” is displayed to indicate AM or PM in 12-hour basis indication.
“Shutter mode”
“Zone Setting”
“Timer”
“Chronograph”
Using EL lights
The EL lights are turned on when you press button A while the crown is pushed
in and the mode is [Time], [Calendar] or [Zone Setting].
•The lights are also turned on when pressing button A or B during time
measurement using the chronograph.
Setting the time
Setting the time of the analog section
1. Pull out the crown when the second hand points 0 second.
The second hand stops.
2. Rotate the crown to set the time.
• Move the hands 4 or 5 minutes forward and move them back to the right
time to set the time more precisely.
3. Push in the crown in accordance with a reliable time source to
finish the procedure.
The second hand starts moving.
6. Repeat steps 4 and 5 to set other targets.
7. Press and release the upper left button M to finish the
procedure.
U010 Abbreviated instruction
Setting the calendar
Using the world time
The calendar of this watch does not have to be adjusted manually until Thursday,
December 31, 2099 including leap years. (perpetual calendar)
•Press button M to cancel setting of the calendar.
•The setting is automatically canceled in about 2 minutes without any operation
during the setting.
1. Press and release the upper left button M repeatedly to change
the mode to “Calendar”.
2. Press and release the lower left button B repeatedly to
indicate an area name you want on the digital display 2.
• For area names, refer to the table on “Using the world time”.
3. Press and hold the lower left button B for about 2 seconds.
The month indication starts blinking and the calendar becomes adjustable.
• The blinking part is the target to adjust.
4. Press and release the lower left button B repeatedly to change
the target to be set.
• Each time you press button B, the target changes as follows:
Normal calendar
indication
Month
1. Press and release the upper left button M repeatedly to change
the mode to “Time”.
• Choose “Calendar” to see calendar.
2. Press and release the lower left button B repeatedly to choose
an area name on the digital display 2.
The time or calendar of the chosen area is indicated on the digital display.
Table of time zones and representative areas
•The time zone in the table is based on UTC (Coordinated Universal Time).
•Countries or regions may change time zones for various reasons.
Time Area name
zone
0
+1
+2
+3
+4
+5
+5.5
+6
+7
+8
Year
Date
5. Press and release the lower right button A to adjust the target.
• Pressing and holding button A changes indication continuously.
6. Repeat steps 4 and 5 to set other targets.
7. Press and release the upper left button M to finish the
procedure.
• The day of week is set automatically.
UTC
LON
PAR
ROM
CAI
IST
MOW
KWI
DXB
KHI
DEL
DAC
BKK
SIN
HKG
BJS
Representative area
Coordinated Universal
Time
London
Paris
Rome
Cairo
Istanbul
Moscow
Kuwait
Dubai
Karachi
New Delhi
Dhaka
Bangkok
Singapore
Hong Kong
Beijing
Time Area name
zone
+9
+10
+11
+12
–10
–9
–8
–7
–6
–5
–4
–3
TYO
SYD
NOU
AKL
HNL
ANC
LAX
DEN
CHI
MEX
NYC
YUL
CCS
RIO
BUE
Representative area
Tokyo
Sydney
Noumea
Auckland
Honolulu
Anchorage
Los Angeles
Denver
Chicago
Mexico City
New York
Montreal
Caracas
Rio de Janeiro
Buenos Aires
U010 Abbreviated instruction
Using the zone-set function
You can hide unnecessary ones in the 30 areas and UTC, which the watch can
indicate the time of; you can also activate/deactivate summer time for those areas
separately.
•Press button M to cancel setting.
•The setting is automatically canceled in about 2 minutes without any operation
during the setting.
1. Press and release the upper left button M repeatedly to change
the mode to “Zone Setting”.
2. Press and release the lower left button B repeatedly to choose
an area name on the digital display 2.
• Pressing and releasing button A while Pressing and holding button B also
change the area name indication.
3. Press and hold the lower left button B for about 2 seconds.
“On” or “OF” (off) and the area name starts blinking and display/hide of the
area becomes adjustable.
4. Press and release the lower right button A to select “On”
(display) or “OF” (hide) of the area.
5. Press and release the lower left button B.
“On” or “OF” (off) and “SUM” (summer time) starts blinking and the
summer time setting becomes adjustable.
6. Press and release the lower right button A to set the summer
time.
7. Repeat steps 2 to 6 to set other areas.
8. Press and release the upper left button M to finish the
procedure.
Resetting the watch — All Reset
1. Pull out the crown.
2. Press and release buttons A, B and M at the same time.
All the digital indication lights up.
3. Push in the crown.
The alarm sounds and the digital indication is turned off.
After All Reset
After All Reset, set the time and calendar and other settings. Set also the alarm.