CARE AND INSTRUCTIONS
To get the MOST out of life...
you need to get the MOST out of your food!™
IMPORTANT SAFEGUARDS &
CAUTIONARY INFORMATION
SAVE THESE INSTRUCTIONS
FOR YOUR SAFETY, CAREFULLY READ ALL INSTRUCTIONS
BEFORE OPERATING YOUR NUTRIBULLET.
MEDICAL WARNING!
• IF YOU ARE TAKING ANY MEDICATION, ESPECIALLY
CHOLESTEROL-LOWERING MEDICATION, BLOOD
THINNERS, BLOOD PRESSURE DRUGS, TRANQUILIZERS, OR
ANTIDEPRESSANTS, PLEASE CHECK WITH YOUR DOCTOR
BEFORE CONSUMING ANY OF THE NUTRIBLAST RECIPES.
• THE FOLLOWING LIST OF SEEDS AND PITS CONTAIN
CHEMICALS THAT RELEASE CYANIDE INTO THE BODY WHEN
INGESTED. DO NOT USE THE FOLLOWING SEEDS AND PITS IN
THE NUTRIBULLET: APPLE SEEDS, APRICOT PITS, CHERRY PITS,
PLUM PITS, PEACH PITS.
ELECTRICAL SAFETY
When using any electrical appliance, basic safety precautions
should always be observed, including the following:
• CAUTION! TO AVOID RISK OF ELECTRIC SHOCK, NEVER IMMERSE THE CORD, PLUG,
OR POWER BASE OF BLENDER IN WATER OR OTHER LIQUIDS.
• DO NOT USE THIS PRODUCT WITH ANY TYPE OF ADAPTER OR VOLTAGE
CONVERTER DEVICE.
• USE OF ADAPTERS AND CONVERTERS IS CONSIDERED AN UNAUTHORIZED
MODIFICATION OF THE PRODUCT AND AS SUCH WILL VOID THE WARRANTY. USE
OF THIS PRODUCT IN LOCATIONS WITH DIFFERENT ELECTRICAL SPECIFICATIONS
MAY RESULT IN DAMAGE TO THE PRODUCT.
• THE USE OF ATTACHMENTS, INCLUDING CANNING JARS, NOT RECOMMENDED
OR SOLD BY MANUFACTURER MAY CAUSE FIRE, ELECTRIC SHOCK, OR INJURY
AND WILL VOID THE WARRANTY.
2
• UNPLUG THE NUTRIBULLET WHEN IT IS NOT IN USE. MAKE SURE THE POWER BASE
IS UNPLUGGED BEFORE ASSEMBLING, DISASSEMBLING, ADDING ADDITIONAL
PARTS, OR CLEANING.
• This appliance has important markings on the plug and is not suitable for
replacement. If damaged, please call Customer Service for a replacement.
• Do not pull, twist, or damage the power cord.
• Do not allow the cord to hang over the side of the counter or table.
• Do not allow cord to touch hot surfaces, including the stove.
• Periodically inspect the cord and plug for damage. Do not operate any appliance
with a damaged cord or plug. If the appliance malfunctions or is dropped or
damaged in any manner, discontinue use and contact Customer Service for
assistance in obtaining a replacement.
• To clean the inside of the power base, unplug the unit and wipe with a sponge
moistened with warm water.
• THIS APPLIANCE CAN BE USED BY CHILDREN AGED 8 YEARS AND ABOVE AND
BY PERSONS WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES OR
LACK OF EXPERIENCE AND KNOWLEDGE IF THEY HAVE BEEN GIVEN INSTRUCTION
OR ARE SUPERVISED CONCERNING THE USE OF THE APPLIANCE IN A SAFE
MANNER AND UNDERSTAND THE HAZARDS AND RISKS INVOLVED.
• DISCONNECT FROM POWER SOURCE BEFORE CHANGING ACCESSORIES AND DO
NOT ATTEMPT TO HANDLE UNTIL ALL PARTS HAVE STOPPED MOVING.
• THERE IS A POTENTIAL FOR PERSONAL INJURY FROM THE MISUSE OF
THE NUTRIBULLET. TAKE CARE WHEN HANDLING THE SHARP PRECISION
EXTRACTION BLADES.
• UNPLUG THE UNIT AND USE CAUTION DURING CLEANING.
• THE NUTRIBULLET IS NOT A TOY, AND CHILDREN SHOULD NOT PLAY WITH IT.
WARNING: VENTILATION CAUTION
Always operate the Nutribullet on a level surface, leaving unobstructed space
beneath and around the power base to permit proper air circulation. Slots and
openings on the bottom of the product are provided for ventilation to ensure reliable
motor operation and to prevent over-heating. Warning: To prevent fire hazard, power
base openings should be free of dust or lint and never obstructed with flammable
materials such as newspapers, tablecloths, napkins, dishtowels, place mats or other
similar type materials.
3
EXTRACTION SAFETY PRECAUTIONS
Carefully read and follow all safety precautions, particularly when operating the NutriBullet.
• NEVER LEAVE THE NUTRIBULLET UNATTENDED WHILE IN USE!
• CLOSE SUPERVISION IS NECESSARY WHEN ANY APPLIANCE IS USED
BY OR NEAR CHILDREN.
• NEVER USE THE PRECISION EXTRACTOR BLADE TO BLEND WITHOUT
LIQUID AS DOING SO MAY DAMAGE IT.
• NEVER PUT YOUR HANDS OR UTENSILS NEAR THE MOVING PRECISION
EXTRACTOR BLADE AND NEVER USE YOUR HANDS OR UTENSILS TO PRESS THE
ACTIVATOR BUTTONS DOWN WHILE THE NUTRIBULLET IS PLUGGED IN.
• THE PRECISION EXTRACTOR BLADE IS SHARP! HANDLE CAREFULLY. USE CARE
WHILE HANDLING THE PRECISION EXTRACTOR BLADE. DO NOT TOUCH THE
PRECISION EXTRACTOR BLADE EDGES TO AVOID INJURY.
• CHECK GASKET TO MAKE SURE IT IS COMPLETELY SEATED IN THE PRECISION
EXTRACTOR BLADE UNIT BEFORE EACH USE. CONTACT CUSTOMER SERVICE FOR
ASSISTANCE IF THE GASKET IS NOT COMPLETELY SEATED.
• WE RECOMMEND REPLACING YOUR PRECISION EXTRACTOR BLADE EVERY
6 MONTHS OR AS NEEDED FOR OPTIMAL PERFORMANCE. TO ORDER A
REPLACEMENT PRECISION EXTRACTOR BLADE, SIMPLY VISIT: WWW.
NUTRILIVING.COM
• THE NUTRIBULLET IS NOT INTENDED FOR USE IN MICROWAVE OVENS. DO NOT
PLACE THE NUTRIBULLET CUPS, POWER BASE OR ANY NUTRIBULLET ACCESSORY
IN A MICROWAVE OVEN AS THIS MAY RESULT IN DAMAGE TO THE ACCESSORY.
TO HEAT SOUPS AFTER BLENDING COOL OR ROOM TEMPERATURE INGREDIENTS,
TRANSFER MIXTURE TO A MICROWAVE SAFE CONTAINER OR TO A STOVE-TOP POT
PRIOR TO HEATING.
• NEVER MICROWAVE ANY UNVENTED, SEALED CONTAINERS AS THEIR CONTENTS
MAY EXPAND WITH HEAT PRESSURE AND EXPLODE, RESULTING IN POSSIBLE
INJURY OR PROPERTY DAMAGE.
• NEVER BLEND CARBONATED INGREDIENTS OR LIQUIDS. BUILT-UP PRESSURE
FROM RELEASED GASES CAN CAUSE CONTAINER TO BURST, RESULTING IN
POSSIBLE INJURY.
4
• DO NOT PUT HOT INGREDIENTS IN ANY OF THE BLENDING VESSELS BEFORE
BLENDING. THE HEAT FROM THE INGREDIENTS CAN CAUSE PRESSURE TO BUILD
IN THE SEALED VESSEL CAUSING POSSIBLE EXPULSION OF THE INGREDIENTS
AND CAUSING PERSONAL INJURY OR PROPERTY DAMAGE. START WITH COOL OR
ROOM TEMPERATURE INGREDIENTS. (21ºC/70ºF OR LESS).
• DO NOT RUN THE NUTRIBULLET WITH EMPTY CUPS AS THIS CAN DAMAGE THE UNIT.
• AFTER BLENDING INGREDIENTS, ALLOW THE CONTENTS TO SETTLE AND RELEASE
ANY PRESSURE THAT MAY HAVE BUILT UP DURING THE EXTRACTION PROCESS.
ALWAYS UNSCREW THE PRECISION EXTRACTOR BLADE ASSEMBLY FROM THE
VESSEL SLOWLY AND POINTED AWAY FROM YOU IN CASE THERE IS ANY BUILT UP
PRESSURE.
• IF YOU WILL NOT CONSUME YOUR BLAST IMMEDIATELY, USE THE STAY FRESH
LID TO CLOSE THE CONTAINER. REMEMBER TO UNSCREW THE LID AND RELEASE
PRESSURE PERIODICALLY AS THIS WILL RELEASE ANY ADDED PRESSURE THAT
MAY HAVE BUILT UP DUE TO FERMENTATION. THE SUGARS IN THE FRUIT AND
VEGETABLES CAN FERMENT, CAUSING PRESSURE TO BUILD UP AND EXPAND IN
THE VESSEL, WHICH CAN CAUSE INGREDIENTS TO BURST AND SPRAY OUT WHEN
MOVED OR OPENED.
• NEVER PERMIT ANY BLENDED MIXTURE TO SIT INSIDE A SEALED CUP WITH A
PRECISION EXTRACTOR BLADE WITHOUT FIRST RELEASING THE PRESSURE.
BY UNSCREWING THE LID AND OPENING THE CUP FOR A FEW MOMENTS, THE
PRESSURE WILL DISSIPATE.
• Avoid contact with moving parts.
• NEVER STORE THE PRECISION EXTRACTOR BLADE ON THE POWER BASE! NEVER
LEAVE THE PRECISION EXTRACTOR BLADE ON THE POWER BASE WITHOUT A CUP
OR VESSEL ATTACHED.
• Keep hands and utensils away from the precision extractor blade while chopping or
blending food to reduce the risk of severe personal injury or damage to the device.
A scraper may be used, but only when the blender/food chopper is not running and
is unplugged.
• Do not use the precision extractor blade for grinding dry materials such as grains,
cereal, or coffee.
• Do not use the NutriBullet outdoors or in inclement weather.
• NEVER BLEND HOT LIQUIDS.
5
SAFETY WARNINGS: EXTRACTING FOR
NUTRIBLASTS
• TO TURN OFF THE NUTRIBULLET AT Any time DURING blending, lift the cup off
the power base. ALWAYS ALLOW THE MOTOR TO STOP COMPLETELY BEFORE
REMOVING THE CUP/ precision extractor BLADE. ALWAYS UNPLUG THE POWER
BASE UPON COMPLETION OF use.
• Do not touch coupling gear directly with hands after use! The coupling gear in
precision extractor blade base and Power base will be hot!
• DO NOT RUN FOR MORE THAN 1 minute INTERVALs.
• DO NOT RUN FOR MORE THAN 3 CONSECUTIVE 1 MINUTE INTERVALS WITHOUT
ALLOWING the POWER BASE TO COOL TO PREVENT OVERHEATING AND ALLOW
INGREDIENTS TO SETTLE FOR 2-3 MINUTES AFTER THE 3RD EXTRACTION CYCLE.
• POWER BASE IS EQUIPPED WITH AN INTERNAL THERMAL BREAKER THAT SHUTS
OFF THE POWER BASE if THE UNIT OVERHEATS.
• IF THE POWER BASE OVERHEATS AND SHUTS OFF, UNPLUG THE POWER BASE
AND LET IT COOL FOR AN HOUR OR MORE BEFORE ATTEMPTING TO USE IT AGAIN.
POWER BASE WILL RESET WHEN THE UNIT IS powered off AND THE THERMAL
BREAKER HAS COOLED DOWN SUFFICIENTLY.
• ALLOW THE NUTRIBULLET TO COOL DOWN FOR 10 MIN AFTER 4-5 CYCLES TO
PREVENT OVERHEATING AND DAMAGING THE UNIT.
• To prevent leakage, always align and hand-tighten the precision extractor blade to the
vessel or cup prior to inverting it and placing the assembly on to the motor base.
CLEANING SAFEGUARDS
• The precision extractor blade must be cleaned immediately After each use.
• ALWAYS UNPLUG the POWER BASE PRIOR TO CLEANING, ASSEMBLING OR
DISASSEMBLING.
• NEVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN THE DISHWASHER.
WIPE OFF ANY DEBRIS INSIDE THE POWER BASE IMMEDIATELY with warm water
TO KEEP IT IN GOOD WORKING ORDER.
• DO NOT WASH THE precision extractor BLADE IN THE DISHWASHER AS ELEVATED
TEMPERATURES CAN DAMAGE GASKET SEALS.
• THE NutriBullet CUPS AND precision extractor BLADES SHOULD NOT BE immersed
IN BOILING WATER FOR ANY REASON AS THIS WILL WARP the PLASTIC and
damage the gaskets.
• The precision extractor BLADE is SHARP! USE CARE WHEN CLEANING the
precision extractor BLADES TO AVOID INJURY! RINSE precision extractor BLADES
IMMEDIATELY AFTER EACH USE TO PREVENT DEBRIS FROM DRYING AND STICKING
TO IT. IF NECESSARY, USE a dish BRUSH TO LOOSEN ANY DEBRIS AROUND BLADE,
GASKETS AND BLADE HOUSING THREADS WITH CARE. Do not use your fingers.
• HAND WASH ONLY WITH MILD DISH SOAP AND WARM WATER (NOT HOT).
• Allow to air dry prior to proper storage.
6
• FOR TOUGH DEBRIS, FILL THE CUP ½ FULL WITH WARM (NOT HOT), MILD SOAPY
WATER. THEN, SIMPLY TWIST ON THE precision extractor BLADE, POP IT ON THE
BASE AND GIVE IT A RUN FOR 30-45 SECONDS. FOLLOW UP WITH A QUICK BRUSH.
• WHEN WASHING precision extractor BLADE, DO NOT ATTEMPT TO REMOVE THE
GASKET RING. SIMPLY HAND WASH THE precision extractor BLADE IN WARM,
MILD SOAPY WATER. ATTEMPTED REMOVAL OF THE GASKET MAY PERMANENTLY
DAMAGE THE precision extractor BLADE CONFIGURATION AND CAUSE LEAKAGE.
• We recommend replacing your Extractor Blade every 6 months or as needed for optimal
performance. To order a replacement blade, simply visit: www.nutriLIVING.COM
STUBBORN CLEANUP
If ingredients dry inside the NutriBullet Cups, make your cleanup a snap by filling
the cup about 2/3 full with warm soapy water (not hot) and screw on the Precision
Extractor Blade. Place the cup assembly on the NutriBullet Power Base for about
20-30 seconds. This will loosen the stuck ingredients, and with a light scrub and
rinse, you’ll be all done.
CLEANING THE NutriBullet POWER BASE
For the most part, the Power Base doesn’t really get dirty, but if you neglect to twist
the precision extractor blade on to the cup tightly, liquids can leak out and get into
the base and stick to the activator buttons.
Here’s how to clean it up:
Step 1: The most important thing — UNPLUG the Power Base before cleaning!
Step 2: Use a damp rag to wipe down the inside and Outside of the Power Base.
• NEVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN
THE DISHWASHER.
• BLADES ARE SHARP! Never put your hands or utensils near the precision extractor
blade and never use your hands or utensils to press the activator buttons down
while the Power Base is plugged in.
7
HOW IT WORKS
Extracting
8
1
Fill ingredients into the NUTRIBULLET Cup.
2
Add the liquid of your choice up to the MAX line.
(Liquid is required!).
3
Twist the Extractor Blade onto the NUTRIBULLET
Cup and hand tighten to make sure the
vessel has been sealed.
4
Press the vessel blade side-down onto the
Power Base. Press down and twist to extract
for no longer than 1 minute. If more extraction
is needed, wait 1 minute, then repeat the
extraction process in 1 minute intervals
up to 3 times as needed to achieve the
desired consistency. If more than 3 1-minute
extractions are needed, allow the power base
to cool for 2-3 minutes after the third extraction
before beginning the next round. You can see
the extraction process happening. Keep an eye
on the consistency. Your NUTRIBLAST is ready
when it looks smooth and creamy!
5
To turn off the NUTRIBULLET - simply twist in the opposite direction
(to the right) to release the tabs and stop pressing down on the cup.
Once the power base stops completely, remove the cup from the
power base.
CAUTION: FRICTION FROM THE ROTATING BLADE WHEN EXTRACTING
CAN CAUSE INGREDIENTS TO HEAT AND GENERATE INTERNAL PRESSURE
IN THE SEALED VESSEL. IF THE VESSEL IS WARM TO TOUCH, ALLOW TO
COOL BEFORE CAREFULLY OPENING POINTED AWAY FROM YOUR BODY.
9
HOW IT WORKS
Pulse Technique
Shake Technique
Because the NUTRIBULLET’S motor is so powerful, it emulsifies the
ingredients when you extract. That is why when you want to make foods
such as chunky salsa, or coarse chopped onions, the Pulse technique is key.
Pulsing takes a tiny bit of getting used to, but once you get a feel for it, you’ll
be a Pro in no time!
Sometimes, if you over fill the cups with ingredients or don’t put enough
water, the results can increase the density of the mixture. This makes it hard
for the ingredients toward the top of the cup to make it down to the blade. If
some of your ingredients are having a hard time making it down to the blade,
simply use the Shake technique.
To Pulse, you simply press down on the cup very quickly and immediately
release. For foods that you want coarsely chopped, a quick tap on the top
of the cup is all you need. Then let the blades come to a complete stop
and tap again until you get the consistency you desire.
1
2
Remove the cup and blade assembly from the Power Base.
3
To turn off the NUTRIBULLET - simply twist in the
opposite direction (to the right) to release the tabs
and stop pressing down on the cup. Once the power
base stops completely, remove the cup from the
power base.
THE SECRET: The trick to successful Pulsing is to make sure that the machine
doesn’t accidentally slip into Lock On mode. To avoid this, simply use your other
hand to apply counter-clockwise pressure on the cup as you Pulse.
1
2
To start, hold the cup at the base and apply
counter-clockwise pressure to it, to keep it
from locking on.
With your other hand, tap the top of the cup and
immediately release. Continue Pulsing until you
get the consistency you want.
Tap Technique
For really stubborn ingredients that are clinging to the side of the cup instead
of being recirculated into the cutting zone, simply use the Tap technique.
1
Take the cup and blade assembly off the
Power Base and Tap the cup and blade assembly
on the counter to force the ingredients down into
the blades.
2
Place the cup and blade assembly onto the
Power Base and finish processing.
3
10
With the cup and blade assembly in hand, shake
it like a cocktail shaker. Then put it back on the
Power Base.
To turn off the NUTRIBULLET - simply twist in the
opposite direction (to the right) to release the tabs and stop pressing
down on the cup. Once the power base stops completely, remove the
cup from the power base.
11
CLEANING THE NUTRIBULLET
WARNING:
ALWAYS UNPLUG THE NUTRIBULLET WHEN CLEANING OR ASSEMBLING.
Washing the NUTRIBULLET
Cleaning the NUTRIBULLET is so easy… simply place any of the pieces (except for the
Power Base and blade holders) on the top shelf of the dishwasher or hand wash with
warm soapy water and rinse.
WARNING:
DO NOT WASH THE BLADES IN THE DISHWASHER. THE NUTRIBULLET CUPS CAN BE
WASHED IN THE DISHWASHER AND SHOULD BE WASHED ON THE TOP RACK OF THE
DISHWASHER USING THE NORMAL (NOT SANITIZE) CYCLE. THE
NUTRIBULLET CUPS AND BLADES SHOULD NOT BE IMMERSED IN BOILING WATER FOR
ANY REASON AS THIS WILL WARP THE PLASTIC AND DAMAGE THE GASKETS.
STUBBORN CLEANUP
If ingredients dry inside the NUTRIBULLET, make your cleanup a snap by filling the cup
about 2/3 full with warm soapy water and screw on the Extractor Blade. Place the cup
assembly on the NUTRIBULLET, Power Base for about 20-30 seconds. That will loosen
the stuck ingredients, and with a light scrub, you’ll be all done.
CLEANING THE NUTRIBULLET POWER BASE
For the most part the Power Base doesn’t really get dirty, but if you neglect to twist the
blade on to the cup tightly, liquids can leak out and get into the base and
activator buttons.
Here’s how to clean it up.
Step 1: The most important thing is to UNPLUG the Power Base before!
Step 2: Use a damp rag to wipe down the inside and outside of the Power Base.
• NEVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN
THE DISHWASHER.
• Never put your hands or utensils near the moving blade and never use your
hands or utensils to press the activator buttons down while the Power Base
is plugged in.
12
13
GETTING STARTED
Give all pieces (except Power Base) a quick rinse
with soapy water before using!
Getting started couldn’t be easier! Get your NUTRIBULLET unit out and give
the cups and blades a quick rinse with warm soapy water. Then get ready to
create your first NUTRIBLAST!
Now it’s time make your first
NUTRIBLAST!
STEP 1: ADD 50% LEAFY GREENS TO THE NUTRIBULLET CUP.
Two cups makes up a full serving of leafy greens, so that’s the amount
you want to work up to in the first few weeks. That’s about two goodsized handfuls.
STEP 2: ADD 50% FRUIT TO THE NUTRIBULLET CUP.
A serving of fruit is generally a cup. We suggest adding a
banana or 1/2 of an avocado to every Blast for the “creamy”
factor. Then add three more fruits (or more if you can fit it!) to
your NUTRIBULLET Cup.
STEP 3: ADD LIQUID. To make a NUTRIBLAST, you must add
liquid. We suggest you use a liquid of your choice (such as water,
coconut water or almond milk) up to but never beyond the MAX
LINE. For a thicker Blast, use a little bit less liquid.
STEP 4: ADD YOUR BOOST (optional).
Add a handful of nuts, seeds or goji berries to pack in
some essential fatty acids! Boosts make for a more
nutritious and filling NUTRIBLAST.
STEP 5: TWIST ON THE
NUTRIBULLET BLADE, EXTRACT, ENJOY! Twist on the blade,
then place the cup on the Power Base. Push down and twist
until it locks into the “on” position (you’ll know because it will
be running!). Keep extracting until you achieve a very smooth
consistency. Twist on the handle and bottoms up!
STEP 6: TO TURN OFF THE NUTRIBULLET, simply twist in the opposite
direction (to the right) to release the tabs and stop pressing down on the cup.
Once the power base stops completely, remove the cup from the power base.
14
15
NUTRIBLAST
HOW TO BUILD A NUTRIBLAST
NOTE!
1 YOU MUST ALWAYS ADD
A LIQUID BEFORE YOU
BLEND A NUTRIBLAST.
4 Easy Steps!
2 DON’T OVERFILL YOUR
1
CUP! MAKE SURE YOUR
INGREDIENTS AND LIQUID
REACH NO HIGHER THAN
THE MAX LINE.
2
3
4
3 DON’T ADD MORE THAN
Fill the cup with 50% leafy greens + 50% fruit.
Fill only up to the MAX line with liquid (add ice if you want,
but do not exceed 25% of the total volume of ingredients.).
Add 1/8 to 1/4 nuts and/or seeds, if desired.
Twist on the NUTRIBULLET blade and blend until smooth.
LEAFY GREENS – 50%
THE OPTIONAL 25% ICE
TO THE TOTAL BLAST
INGREDIENTS.
Choose one from the following list of
leafy greens or, mix and match! Fill the
NUTRIBULLET Cup up to 50% with leafy
greens. Work up to 2 full cups (2 handfuls) of leafy greens per Blast.
WARNING!
BAD SEEDS:
While NUTRITION EXTRACTION can be amazingly
beneficial, not all fruit seeds and rinds are created equal. The following
seeds and pits contain a chemical that releases cyanide into the body when
ingested. DO NOT USE the following seeds and pits in the NUTRIBULLET:
• Apple Seeds
• Apricot Pits
• Cherry Pits
• Plum Pits
FRUITS – 50%
Choose as many fruits as
you want to equal 50% of
your NUTRIBLAST.
Apple
Avocado
Banana
Blackberry
Blueberry
Cantaloupe
Cranberry
Fig
Collard Greens
Kale
Romaine
Spinach
Spring Greens
Green Grapes
Guava
Honeydew
Kiwi
Mango
Nectarine
Orange
Papaya
Swiss Chard
Peach
Pear
Pineapple
Plum
Raspberries
Red Grapes
Strawberry
Watermelon
• Peach Pits
NOTE: The cyclonic action of your NUTRIBULLET requires the use of liquids to
make NutriBlasts and other nutritious beverages. It is not intended to be used
as an ice crusher, and not without liquids. To make a delicious cold NutriBlast,
we suggest that you use frozen fruit and chilled liquids. Alternatively, you may
add crushed ice, up to 25% of the total cup volume, with water or other liquid
filled up to the “MAX--” line. Do not crush ice or other hard items without
liquid, as such prolonged use may dull or damage your blades. Always inspect
your blades before each use.
14
Enjoy 2 a Day!
BOOSTS - 1/4
CUP
The following ingredients
are an important part
of your NUTRIBULLET
NUTRIBLAST, adding
additional fiber and
nutrition to every sip. Add
1/8 to ¼ cup to any Blast.
Nuts
Almonds
Cashews
Walnuts
Seeds
Chia Seeds
Flax Seeds
Hemp Seeds
Pumpkin Seeds
Sesame Seeds
Sunflower Seeds
Super Chargers
Goji Berries
Acai Berries
17
18
NOTES
NOTES
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
19
CARE AND INSTRUCTIONS
EN/Explanation of the marking
EN/This marking indicates that this product should not be
disposed with other household wastes throughout the EU. To
prevent possible harm to the environ ment or human health from
uncontrolled waste disposal; recycle it responsibly to promote
the sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take
this product for environmental safe recycling
EN/The transport and protective packing has been selected
from materials, which are environmentally friendly for disposal
and can be recycled. Ensure that any plastic, wrappings, bags
etc. are disposed of safely and kept out of the reach of babies
and young children. Rather than just throwing these materials
away, recycle them
EN/A Class II or double insulated electrical appliance is one
which has been designed in such a way that it does not require
a safety connection to electrical earth (ground).
EN/Manufacturer’s declaration that product meets the
requirements of the applicable EC directives
EN/Conformity for CU Countries ( Russia, Kazakhstan and
Belarus).
EN/Food Contact safe product.
Technical Specification:
Model no.: NB -201
Voltage: 220 -240V
Frequency: 50/60Hz
Power: 900W MAX
Protection Class: II
Made in CHINA
Distributed by:
High Street TV, PO Box 724,
Altrincham, WA15 5BJ
Manufactured for:
NUTRIBULLET, LLC
LOS ANGELES, CA 90025, USA
NUTRIBULLET is a registered trademark of CAPBRAN HOLDINGS, LLC
Copyright © 2016 CAPBRAN HOLDINGS, LLC. ALL RIGHTS RESERVED
LOS ANGELES, CA 90025, U.S.A. MADE IN CHINA