Instant Hot Water Dispensers
The Next
Necessity
F-GN1100
™
Our finest line of instant hot water dispensers
for use with our Hot Water Tank for filtered
near-boiling 200°F water
Tank with filter sold separately (HWT-F1000S)
Submittal Sheet
Specifications
• Hot Only – Dispenses near-boiling
200°F water
• Graceful high-arching spout swivels for
greater convenience and stylish integrated
lever provides a dramatic look
• Hot lever automatically shuts off
Valve
Instant, self-closing
Shipping Weight
Approximately
4.0 lbs.
Required
Hole Diameter
1 -1/4" – 1 -1/2"
standard sink hole
• Durable all brass faucet construction
• We Come To You 5-Year In-Home
Limited Warranty*
®
• For use with InSinkErator Hot Water
Tank and F-1000S Filtration System
• Available in these designer finishes:
white, biscuit, French gold, satin nickel,
polished nickel, chrome, brushed chrome,
mocha bronze, oil rubbed bronze, matte
black, gloss black, classic oil-rubbed bronze
and brushed bronze
Dimensions
5-1/4"
Minimum 3-1/4" required
from sink hole center
to backsplash
8-3/4"
• Unit not for commercial/industrial use
Sample Specification
5-1/2"
Hot Side
Water Supply
Inlet Tube
Flexible
Outlet Tube
Flexible
Vent Tube
1/4" Incoming
Water Supply
Instant hot water dispenser(s) shall be
InSinkErator Model F-GN1100 with 2/3-gallon
hot water tank, adjustable temperature from
160°F to 210°F and instant, self-closing hot valve.
Warranty:
5-year parts and in-home service.
10-7/8"
12 1/2"
NOTE: Max counter thickness is 3".
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
6-3/4"
2 1/4"
6-1/8"
Job Specifications
Certified to
NSF/ANSI 372
≤ 0.25% lead
USA
1-800-558-5700
www.insinkerator.com
Canada
1-800-558-5700
www.insinkerator.ca
WDT513-16C-83-10
Printed in USA
Complies with
California Lead
Plumbing Law
The Emerson logo is a trademark
and a service mark of Emerson Electric Co.
InSinkErator may make improvements and/or changes
in the specifications at any time, in its sole discretion,
without notice or obligation and further reserves the
right to change or discontinue models.
©2016 InSinkErator, InSinkErator® is a business
unit of Emerson Electric Co. All Rights Reserved.
Instant Hot Water Dispensers
The Next
Necessity
Model
HWT-F1000S
Stainless Steel Tank dispenses filtered
near-boiling 200˚F water instantly
™
Water dispenser sold separately
Submittal Sheet
Specifications
• 2/3-gallon stainless steel tank
Capacity
2/3-gallon stainless
steel tank dispenses
60 cups of 200˚F
water per hour
Electrical
115 volts, A.C., 750
watts, 6.25 amp
heating element
with grounded
three (3) prong plug
Thermostat
Snap-action,
adjustable from
160˚F to 210˚F
(factory pre-set
at 200˚F)
Insulation
Meets U.L. 94HF-1
flammability
specification
• Easy to adjust temperature control
• Tool-free tank connections and dry start
protection to ease installation
• Provides 60 cups/hour of near-boiling water
• F-1000S Filtration System included for
fresher tasting water
- Reduces particulates, chlorine taste and
odor for clean, refreshing taste
- Sanitary, quick-change filter cartridge
makes replacement easy
• 115 volts, 750 watts, 6.25 amps
• For use with InSinkErator
instant hot water dispensers
Recommended
30-125 psi
Supply Pressure
(excluding model Hot1)
Dimensions
• Unit not for commercial/industrial use
Shipping Weight Approximately
7.7 lbs.
Sample Specification
Instant hot water dispenser(s) shall
be equipped with an InSinkErator
Model HWT-F1000S stainless steel tank
with filtration, adjustable temperature
from 160°F to 210°F and instant,
self-closing hot valve.
10-7/8"
6-3/4"
In-Home Parts and Service Warranty*
Tank: 3-years
Filtration System: 1-year
12 1/2"
(excluding replaceable filter cartridge)
2 1/4"
6-1/8"
Job Specifications
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
US Pat. D532,497 S (tank enclosure)
Complies with
California Lead
Plumbing Law
USA
1-800-558-5700
www.insinkerator.com
Canada
1-800-561-1700
www.insinkerator.ca
HC728-16C-83-10
The Emerson logo is a trademark
and a service mark of Emerson Electric Co.
InSinkErator may make improvements and/or changes
in the specifications at any time, in its sole discretion,
without notice or obligation and further reserves the
right to change or discontinue models.
© 2016 InSinkErator, InSinkErator® is a business
unit of Emerson Electric Co. All Rights Reserved.
Download PDF