LOGIK POLISHED STAINLESS STEEL KETTLE

L17KPS12_IB_RC_final120731_BW.pdf
1
31/7/12
3:51 PM
CLEANING THE REMOVABLE SCALE FILTER
Ensure the kettle is cool before removing the filter.
To prevent loose particles of limescale being poured into your beverage, your
kettle is fitted with a scale filter. You may remove the filter and fit it back in after
cleaning.
1. To remove the filter, open the lid.
90˚
2. Push out firmly on the inside of the
filter, lift up and remove.
C
M
Y
3. To fit the filter, open the lid.
90˚
CM
MY
CY
CMY
K
4. Place the filter inside the spout,
ensuring the bottom hook rests in its
match inside the spout.
5. Push down on the lip of the filter. It
will click into place.
SAFETY FIRST!
For your continued safety and to reduce the risk of injury or electric shock, please
follow all the safety precautions listed below.
• Read all the instructions carefully before using this appliance and keep them for
future reference.
• Retain the manual. If you pass the appliance on to a third party, make sure to include
this manual.
• Unplug the appliance from the mains socket when not in use, or before cleaning any
part of the appliance.
• Allow the appliance to completely cool down before cleaning.
• Never immerse the appliance in water and always keep the electrical contacts dry.
• Never place the appliance on or near a source of heat such as a cooker ring or gas
flame.
• Always place the appliance on a dry, flat and stable surface.
• Avoid contact with the steam from the appliance’s spout. Take care when pouring or
refilling after boiling.
• To prevent boiling dry, do not fill the appliance with water less than the minimum fill
level as indicated on the appliance.
• Use the appliance to heat only water.
• Do not interfere with the normal working of the switch.
• Always keep the appliance out of the reach of small children. Children should be
taught about the dangers of boiling water.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instructions concerning the use of the
appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• If the mains cable is damaged it must be replaced by the manufacturer, its service
agent, or similarly qualified persons in order to avoid a hazard.
• Do not let the mains cable hang over the edge of the work surface or allow it to
touch hot surfaces or sources of heat or flame.
• This appliance is intended to be used in households and similar places such as:
- Staff kitchen areas in shops, offices and other work places.
- By clients in motels, hotels and Bed & Breakfast establishments.
Stainless Steel Kettle
Instruction Manual
L17KPS12
NOTE: If you require a replacement for any of the items listed below, please
quote their corresponding part numbers:
Replacement Part
Part Number
Kettle Stand
L17KPS12-005
Scale Filter
L17KPS12-006
Visit Partmaster.co.uk today for the easiest way to buy
electrical spares and accessories. With over 1 million
spares and accessories available we can deliver direct to
your door the very next day. Visit www.partmaster.co.uk or call 0844 800 3456 (UK
customers only). Calls charged at National Rate.
SPECIFICATIONS
Mains supply:
Power consumption:
220-240V~50Hz
1850-2200W
We continually strive to improve our products. Specifications may change without
prior notice.
This symbol on the product or in the instructions means that your
electrical and electronic equipment should be disposed at the end of its
life separately from your household waste. There are separate collection
systems for recycling in the EU. For more information, please contact the
local authority or your retailer where you purchased the product.
DSG Retail Ltd • Maylands Avenue • Hemel Hempstead
Herts • HP2 7TG • England
GB-4
GB-5
(P.N. L17KPS12-003)
Thank you for purchasing your new Logik Kettle.
We recommend that you spend some time reading this instruction
manual in order to fully understand all the operational features it
offers.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
L17KPS12_IB_RC_final120731_BW.pdf
2
31/7/12
3:51 PM
UNPACKING
WHEN THE WATER HAS BOILED
FILLING THE KETTLE
Remove all packaging from the unit. Retain the packaging. If you dispose of it
please do so according to local regulations.
• Push the Open Button down. The lid will spring open to 90˚.
The following items are included:
• Do not exceed the maximum fill level (MAX. 1.7L) as
indicated by the “MAX” mark on the interior of the
kettle.
Stainless Steel Kettle
Instruction Manual
L17KPS12
90˚
ON
F
OF
• Always ensure the kettle is filled passed the
minimum fill level (MIN 0.9L) as indicated by the
“MIN” mark on the interior of the kettle.
• Gently push the lid closed. It will click shut to
indicate it is fully and securely closed.
Thank you for purchasing your new Logik Kettle.
We recommend that you spend some time reading this instruction
manual in order to fully understand all the operational features it
offers.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
• The Main Unit
• Kettle Stand
(P.N.: L17KPS12-005)
• Instruction Manual
(P.N.: L17KPS12-003)
• Ensure that the switch is not obstructed and the lid is firmly closed.
The kettle will not turn off if the switch is obstructed or if the lid is
open.
• After removing the kettle, there may be some water on the surface of
the stand. This is condensation from the steam that causes the kettle
to automatically switch off after boiling. This is normal and should not
be a cause for alarm.
If the kettle is overfilled, boiling water
may be ejected from the spout and cause
scalding.
SWITCHING ON
• Place the kettle on its stand. Connect the stand’s mains cable to the mains socket.
PRODUCT OVERVIEW
Y
CLEANING THE KETTLE
The kettle exterior should be cleaned with a soft damp cloth. Do not use abrasive
cleaners or scouring pads which may damage the finish of the kettle.
C
M
The kettle will automatically switch off.
• Fill the kettle with the required amount of water.
Open
Button
Never immerse the kettle or the stand in water and always keep the electrical
contacts and the power connector hole dry. Always disconnect from the mains
before cleaning the stand.
Lid
Spout
CM
MY
Power Connector Hole
CY
Handle
CMY
• Pull the power switch up to the ON
position.
K
Indicator
ON
F
OF
Power
Switch
Mains
Cable
Kettle
Stand
FIRST TIME USE
Clean your kettle by boiling a full kettle of water twice and then discarding the
water.
GB-1
DESCALING THE KETTLE
Depending on the hardness of the water in
your area, limescale may be deposited on
the heating element and the inside of the
kettle. This normal build-up is not harmful
to health but an excessive amount of scale
may affect the performance of the kettle.
• The indicator on the side of kettle will
light up blue to indicate that the kettle
is heating.
• Never open the lid while the
water is boiling. The steam
coming out from the kettle is
very hot.
• If there is insufficient water in
the kettle, the automatic
safety cut-out will operate. If
this happens, allow the kettle
to cool for 10 minutes before
refilling with cold water and
re-boiling.
GB-2
ON
F
OF
To descale, fill the kettle with distilled water
up to three-quarters of the Max level and
bring the water to boil. After the kettle has
switched off, add a descaling solution
following the manufacturers instructions.
Never attempt to descale the kettle by
chipping or scraping with a sharp
implement.
GB-3
90˚