MaxTester 940/945 Telco OLTS - EQUICOM Méréstechnikai Kft.

MaxTester 940/945 Telco OLTS
FULLY AUTOMATED FASTEST™ BIDIRECTIONAL MEASUREMENTS FOR
INSERTION LOSS, OPTICAL RETURN LOSS AND FIBER LENGTH
S O F T WA R E
First tablet-inspired multifunction optical loss test set (OLTS) measuring insertion loss (IL), optical return loss
(ORL) and fiber length at two wavelengths in 5 seconds via fully automated bidirectional FasTesT™ analysis.
KEY FEATURES
Unmatched FasTesT™ performances: 100 % automated
bidirectional test at two wavelengths under 5 seconds
Best-in-class singlemode distance range of 200 km
EXFO Connect-ready for cloud-based test assets management
100 % automated fiber inspection: one-step process with
pass/fail analysis at both fiber ends
Wi-Fi and Bluetooth connectivity (optional)
On-board assistant and diagnosis to eliminate reference
errors and negative loss
APPLICATIONS
FTTx construction
Improved short fiber measurement
On-board professional PDF reporting
Bright, 7-inch high resolution touchscreen display—
the biggest in the market
Telecommunications and outside plant networks testing
Data centers
Enterprise structured cabling
COMPLEMENTARY PRODUCTS
Fiber Inspection Probe
FIP-400B (Wi-Fi or USB)
Cleaning
Accessories
Data Post-Processing Software
FastReporter 2
SPEC SHEET
A N A LY S I S
MaxTester 940/945 OLTS
THE NEXT GENERATION OF AUTOMATED OLTS:
MORE FEATURES, GREATER PERFORMANCE
Ever since its introduction in 1996, the patented FasTesT™ technology revolutionized the industry by fully automating the test
sequence, saving countless hours of testing and troubleshooting in the field. Proven in thousands of diverse network deployments
across the globe, FasTesT™ truly enables CAPEX/OPEX savings.
The MaxTester 940/945 (MAX-940/945) boasts a 7-inch touchscreen, the largest and most user-friendly display in the industry
to simplify tasks for the technician. The MAX-940/945 also allows for 100 % automated fiber inspection at both ends of the fiber
link. Paired with the FIP-400B automated fiber inspection probes and powered by FasTesT™, this OLTS brings the latest and the
best in innovation and automation at your fingertips.
THE BENEFITS
Trustworthy Test Results
Fully automated fiber inspection
Fiber inspection is at the heart of ensuring that accurate references and measurements can be made. The MAX-940/945
integrates EXFO’s fully automated line of fiber inspection probes to assess and certify connector health within a few seconds.
EXFO’s FIP-430B (USB) and FIP-435B (wireless) rely on elaborate algorithms that do the hard work for you to automatically
center, focus, capture and analyze the connector image. No user intervention needed: achieve repeatable and accurate
inspection, 100 % of the time.
On-board step-by-step animated reference assistant
Accurate and repeatable test results starts with proper test cord referencing. Accurate referencing greatly reduces common
mistakes often encountered in the field. Thanks to the reference assistant’s animated and interactive interface this step of the
testing sequence is now as simple and easy as it can be.
Test shorter links than ever before
Thanks to highly accurate optics, this OLTS can test with extreme precision short links with very low loss.
EXFO’s patent-pending one-cord Simplex reference method
Greatly reduces test uncertainty for greater test accuracy which is a key factor when testing short fiber links such as drop fibers
in FTTH networks.
MaxTester 940/945 OLTS
Test Efficiency
› FasTesT™: acquisition time in five seconds
› Online reporting–live from the field
› Maximum simplicity and fast-learning curve with on-board
user assistance:
›
Port LED indicators: guide the user through the
referencing and testing processes. LED indicators show
the user on which optical port to connect the fiber and a
beep indicates that the connection is established to confirm
continuity.
›
On-board diagnosis: throughout the referencing and
testing processes, the instrument delivers real-time
information on the test cord health as well as pass/fail
results according to pre-set or custom criteria. When
performing testing, the instrument delivers diagnosis about
the loss, length and can even identify the presence of a
macrobend (refer to side picture).
›
Figure 1. On-board diagnosis helps the technician take proper action
Margin meters: indicate the result status as well as the
margin according to preset thresholds.
1
› The MAX-940/945 includes a Test Again feature allowing
the user to re-test bad fibers in three easy steps:
1. Go back in test results
2. Quickly and correctly identify the bad fiber by looking at
the pass/fail status
2
3. Press Test Again
Optimized Test Sequence
› Real-time continuity feature: The main and remote
units emit visual and audible signals to let the technicians
on both ends know that a connection has been
established on the specific fiber under test. This also
allows the technicians to start the test right away, saving
time on each fiber tested.
› Text messaging capabilities: Allows users to send
text messages through the fiber under test faster than
other test sets in the industry.
3
Figure 2. See results clearly and test again easily
1
Results tab lists all the fibers tested in a cable
2
Pass/Fail status indicated under Results
3
Test Again button allows re-testing a “failed fiber” using the same settings
Figure 3. Continuity feature
MaxTester 940/945 OLTS
SMALL ENOUGH TO BE HANDHELD.
LARGE ENOUGH FOR FULL-SCREEN VIEWING.
TABLET-INSPIRED DESIGN
With a 7-inch, high-resolution touchscreen–the most efficient display in the industry–the MAX-940/945 OLTS delivers an
unprecedented user experience. It features integrated Wi-Fi/Bluetooth connectivity and instant boot up. The MAX-940/945 OLTS
also ensures a full day of field work with 12 hours of battery autonomy and its internal memory capacity for 150,000 test results.
PACKAGED FOR EFFICIENCY
9
1
Stylus
8
AC adapter
2
FasTesT™ singlemode port
9
LED indicators
3
High-power power meter (optional)
10
Home/switch application and
screen capture (hold)
4
Visual fault locator (optional)
11 Power on/off/stand by
5
10/100 Mbit/s Ethernet port
12 Battery LED status
6
Two USB 2.0 ports
13 Built-in Wi-Fi/Bluetooth (optional)
7
Standard power meter
14 Stand support
1
10
11
12
2
13
3
4
5
14
6
7
8
MaxTester 940/945 OLTS
KEEP YOUR CONNECTORS CLEAN.
KEEP YOUR NETWORK RUNNING SMOOTHLY.
AUTOMATION AT YOUR FINGERTIPS
In combination with EXFO’s automated fiber inspection probes and backed by FasTesT™, the MAX-940/945 OLTS allows for
100 % automated fiber inspection at both ends of the fiber link.
DISCOVER THE INDUSTRY’S FIRST FULLY AUTOMATED FIBER INSPECTION PROBE
Housing a unique automatic focus adjustment system, the FIP-400B automates each operation in the sequence of inspecting a connector
endface. The result: fiber inspection is now a quick, one-step process that can be performed by technicians of all skill levels.
FIVE MODELS TO FIT YOUR BUDGET
› The FIP-430B: complete and fully automated feature
100%
set, includes the powerful fiber image-centering system,
focus adjustment and optimization, and on-board
pass/fail analysis.
Automated
› The FIP-435B: go one step further with the wireless
57%
1-step
a
Process
Shorter Test Time b
a
probe. Includes all FIP-430B features.
› The semi-automated FIP-420B: same features as the
FIP-430B, without the automated focus adjustment.
› The semi-automated FIP-425B: wireless version of
the semi-automated FIP-420B.
› The FIP-410B: all basic inspection features needed for
manual inspection only.
FEATURES
USB WIRED
WIRELESS
Basic
FIP-410B
Semi-Automated
FIP-420B
Fully Automated
FIP-430B
Semi-Automated
FIP-425B
Fully Automated
FIP-435B
Three magnification levels
√
√
√
√
√
Image capture
√
√
√
√
√
Five-megapixel CMOS capturing device
√
√
√
√
√
Automatic fiber image-centering function
X
√
√
√
√
Automatic focus adjustment
X
X
√
X
√
Onboard pass/fail analysis
X
√
√
√
√
Pass/fail LED indicator
X
√
√
√
√
Wi-Fi connectivity
X
X
X
√
√
POWERFUL CONNECTOR ENDFACE IMAGE
VIEWING AND ANALYSIS SOFTWARE
1
› Automatic pass/fail analysis of the connector endfaces
› Lightning-fast results in seconds with simple one-touch operation
› Complete test reports for future referencing
› Stores images and results for recordkeeping
2
Figure 4. Clear pass/fail results
1
Notes
a. Models FIP-430B and FIP-435B.
b. Data sourced from EXFO’s case study, with calculation based on typical analysis time.
Inspection Controls
2
Fiber Inspection Area
MaxTester 940/945 OLTS
FAST TRACK DATA POST-PROCESSING
WITH FastReporter 2 (OPTIONAL)
ONE SOFTWARE DOES IT ALL
This powerful reporting software is the perfect complement to your MAX-940/945 OLTS. It allows creating and customizing
reports to fully address your needs. Being able to rely on a single software to manage all your data and generate all your reports
for your entire optical-layer test applications is your best option for maximum efficiency. FastReporter 2 was designed to handle
everything for you.
Figure 5. FastReporter 2 takes care of all the documenting and reporting for you
CHALLENGE
NO. 1
EDITING MULTIPLE
MEASUREMENT FILES
Batch documenting
››Document an entire project/cable
››Manage separate measurements
simultaneously
Batch standardization
››Adjust cable and fiber parameters
››Add/remove OTDR events
››Adjust detection thresholds
››Perform manual measurements
on OTDR files
››Set pass/fail thresholds
CHALLENGE
NO. 2
ANALYZING MULTIPLE
MEASUREMENT FILES
Specialized analysis tool to:
››Perform OTDR-iOLM bidirectional batch
analysis
››Detect duplicated measurements
››Easily identify results that don’t meet
network requirements
››Apply new configurations, threshold and/
or standards in batch
CHALLENGE
NO. 3
DOCUMENTING
YOUR NETWORK
Flexibility
››Various report templates and formats
(PDF, Excel, HTML)
››Report customization via Excel or
Crystal Reports
››Combined reports such as:
›› Fiber characterization (CD, PMD,
OTDR and OLTS)
›› OTDR and fiber inspection (FIP)
›› iOLM and fiber inspection (FIP)
MaxTester 940/945 OLTS
POWER METER SPECIFICATIONS a
Detector type
Uncertainty
b
Standard
Optional high power
InGaAs
GeX
±(5 % + 32 pW)
±(5 % + 10 nW)
Measurement range (dBm)
5 to –75
25 to –50 c
Wavelengths range (nm)
850, 1270, 1290, 1300, 1310, 1330, 1350, 1370,
1383, 1390, 1410, 1430, 1450, 1470, 1490, 1510,
1530, 1550, 1570, 1590, 1610, 1625, 1650
850, 1300, 1310, 1490, 1550, 1625, 1650
Tone detection (Hz)
270/330/1000/2000
270/330/1000/2000
SOURCE SPECIFICATIONS a
Output power (dBm) c
Multimode (850 nm/1300 nm): –25
SM1 (1310 nm/1550 nm): 2.5
SM3 (1310 nm/1550 nm/1625 nm): 1 / –1 / –5
SM4 (1310 nm/1490 nm/1550 nm): 1 / –5 / –1
Output power stability (dB)
±0.05 over 8 hours
Spectral width (FWHM) (nm)
850 nm: 30 to 60
1300 nm: 100 to 150
FastTesT™ SPECIFICATIONS a
Testing speed c
FasTesT™ Simplex: 3 seconds (two wavelengths, bidirectional, automated, IL + fiber length)
FasTesT™ Simplex: 6 seconds (three wavelengths, bidirectional, automated, IL + ORL + fiber length)
Wavelengths (nm) c
Multimode (LED)
850 ± 20
1300 ± 20
Singlemode (Laser)
1310 ± 20
1490 ± 10
1550 ± 20
1625 ± 10
Launch condition d
Encircled Flux (EF) compliancy guaranteed at 50/125 µm multimode source port.
Within TIA-526-14-B, ISO/IEC 14763-3 and IEC 61280-4-1 EF template limits at the end of an EXFO
reference-grade 50/125 µm test cord.
Loss range (dB) e
Multimode: 20
Singlemode Simplex: 45
Singlemode Duplex: 50
Length measurement range (km) f
Multimode: 20
Singlemode: 200
Length measurement uncertainty c
Duplex: ±(0.5 m + 0.5 % x length)
Simplex: ±(1 m + 0.5 % x length)
ORL measurement range (dB) c
50
ORL measurement uncertainty (dB) c, g
±1
Notes
a. All specifications valid at 23 °C ± 1 °C and 1550 nm, on batteries and after 15 minutes
of warm up, unless otherwise specified.
b. Uncertainty is valid at calibration conditions.
c. Typical.
VISUAL FAULT LOCATOR (VFL) (OPTIONAL)
d. Measured at 850 nm with SC connector.
e. Typical value, at 850 nm for multimode and 1550 nm for singlemode.
f. At 1300 nm for multimode and 1550 nm for singlemode.
g. No discrete reflectance greater than —65 dB. Up to 45 dB.
LASER SAFETY
Laser, 650 nm ± 10 nm
CW/Modulate 1 Hz
Typical Pout in 62.5/125 µm: > –1.5 dBm (0.7 mW)
Laser safety: Class 2
CLASS 1
LASER PRODUCT
MaxTester 940/945 OLTS
ENVIRONMENTAL SPECIFICATIONS
Temperature
Operating
Storage
Relative humidity
–10 °C to 50 °C (14 °F to 122 °F)
–30 °C to 70 °C (–22 °F to 158 °F) a
0 % to 95 % non-condensing
GENERAL SPECIFICATIONS
Display
7-in (178-mm) outdoor-enhanced touchscreen, 800 x 480 TFT
Size (H x W x D)
166 mm x 200 mm x 68 mm (6 9/16 in x 7 7/8 in x 2 ¾ in)
Weight (with battery)
1.5 kg (3.3 lb)
Interfaces
Two USB 2.0 ports
RJ45 LAN 10/100 Mbit/s
Optional Wi-Fi/Bluetooth
Storage
2 GB internal memory (150 000 test results, typical)
Battery b
Rechargeable lithium-polymer battery
12 hours of operation
Power supply
Power supply AC/DC adapter, input 100-240 VAC, 50-60 Hz
Warranty
Three (3) years
Recommended recalibration period
Three (3) years
Notes
a. –20 °C to 60 °C (–4 °F to 140 °F) with the battery pack.
b. Typical.
MaxTester 940/945 OLTS
ORDERING INFORMATION
MAX-940-XX-XX-XX-XX-XX-XX-XX
Model
MAX-940 = OLTS
Optical configuration
SM1 = Singlemode 1310/1550 nm, IL
Connector a
EI-EUI-28 = UPC/DIN 47256
EI-EUI-89 = UPC/FC narrow key
EI-EUI-90 = UPC/ST
EI-EUI-91 = UPC/SC
EI-EUI-95 = UPC/E-2000
EI-EUI-98 = UPC/LC
EA-EUI-28 = APC/DIN 47256
EA-EUI-89 = APC/FC narrow key
EA-EUI-91 = APC/SC
EA-EUI-95 = APC/E-2000
EA-EUI-98 = APC/LC
Extra FIP-400B tips d
Bulkhead tips
FIPT-400-FC-APC = FC/APC tip for bulkhead adapter
FIPT-400-FC-SC = FC and SC tip for bulkhead adapter e
FIPT-400-LC = LC tip for bulkhead adapters
FIPT-400-LC-APC = LC/APC tip for bulkhead adapter
FIPT-400-MU = MU tip for bulkhead adapters
FIPT-400-SC-APC = SC/APC tip for bulkhead adapter f
FIPT-400-SC-UPC = SC/UPC tip for bulkhead adapter
FIPT-400-ST = ST tip for bulkhead adapter
Patchcord tips
FIPT-400-U12M = Universal patchcord tip for 1.25 mm ferrules
FIPT-400-U12MA = Universal patchcord tip for 1.25 mm ferrules APC
FIPT-400-U16M = Universal patchcord tip for 1.6 mm ferrules
FIPT-400-U20M2 = Universal patchcord tip for 2.0 mm ferrules (D4, Lemo)
FIPT-400-U25M = Universal patchcord tip for 2.5 mm ferrules e
FIPT-400-U25MA = Universal patchcord tip for 2.5 mm ferrules APC f
VFL and power meter
00 = Without VFL and power meter
VFL = With VFL
PM2X = With power meter; GeX detector
VPM2X = With VFL and power meter; GeX detector
Multifiber tips g
FIPT-400-MTP2 = MTP/MPO UPC tip for bulkhead adapter
FIPT-400-MTPA2 = MTP/MPO APC tip for bulkhead adapter
FIPT-400-MTP-MTR = MTP/MPO multirow UPC tip for bulkhead adapter
FIPT-400-MTP-MTRA = MTP/MPO multirow APC tip for bulkhead adapter
Wi-Fi and Bluetooth
00 = Without RF components
RF = With RF capability (Wi-Fi and Bluetooth)
Tip kits
FIPT-400-LC-K = LC tip kit including:
FIPT-400-LC: LC tip for bulkhead adapters,
FIPT-400-LC-APC: LC/APC tip for bulkhead adapter,
FIPT-400-U12M: Universal patchcord tip for 1.25 mm ferrules,
FIPT-400-U12MA: Universal patchcord tip for 1.25 mm ferrules APC
FIPT-400-LC-K-APC = LC tip kit including:
FIPT-400-LC-APC: LC/APC tip for bulkhead adapter,
FIPT-400-U12MA: Universal patchcord tip for 1.25 mm ferrules APC
FIPT-400-LC-K-UPC = LC tip kit including:
FIPT-400-LC: LC tip for bulkhead adapters,
FIPT-400-U12M: Universal patchcord tip for 1.25 mm ferrules
FIPT-400-MTP-MTR-K = MTP/MPO multirow APC and UPC tip for bulkhead adapter g
Inspection probe model b
00 = Without inspection probe
FP410B = Digital video inspection probe
Triple magnification
FP420B = Analysis digital video inspection probe
Automated pass/fail analysis
Triple magnification
Autocentering
FP425B = Wireless digital video inspection probe c
Automated pass/fail analysis
Triple magnification
Autocentering
Base tips
APC = Includes FIPT-400-U25MA and FIPT-400-SC-APC
UPC = Includes FIPT-400-U25M and FIPT-400-FC-SC
FP430B = Automated analysis digital video inspection probe
Automated focus
Automated pass/fail analysis
Triple magnification
Autocentering
FP435B = Wireless analysis digital video inspection probe c
Automated focus
Automated pass/fail analysis
Triple magnification
Autocentering
Example: MAX-940-SM1-EI-EUI-89-VFL-RF-FP435B-UPC
Notes
a. Power meter connector type is the same as the EUI connector type.
b. Includes ConnectorMax2 software.
c. RF option mandatory and included with this model.
d. This list represents a selection of fiber inspection tips that covers the most common connectors and applications but does not reflect all the tips available. EXFO offers a wide range of inspection tips,
bulkhead adaptors and kits to cover many more connector types and different applications. Please contact your local EXFO sales representative or visit www.EXFO.com/FIPtips for more information.
e. Included when UPC base tips are selected.
f. Included when APC base tips are selected.
g. Includes a bulkhead adapter for patchcord inspection.
MaxTester 940/945 OLTS
ORDERING INFORMATION
MAX-945-XX-XX-XX-XX-XX-XX-XX
Extra FIP-400B tips d
Bulkhead tips
FIPT-400-FC-APC = FC/APC tip for bulkhead adapter
FIPT-400-FC-SC = FC and SC tip for bulkhead adapter e
FIPT-400-LC = LC tip for bulkhead adapters
FIPT-400-LC-APC = LC/APC tip for bulkhead adapter
FIPT-400-MU = MU tip for bulkhead adapters
FIPT-400-SC-APC = SC/APC tip for bulkhead adapter f
FIPT-400-SC-UPC = SC/UPC tip for bulkhead adapter
FIPT-400-ST = ST tip for bulkhead adapter
Model
MAX-945 = OLTS
Optical configuration
SM1 = Singlemode 1310/1550 nm, IL and ORL
SM3 = Singlemode 1310/1550/1625 nm, IL and ORL
SM4 = Singlemode 1310/1490/1550 nm, IL and ORL
ICERT-Q1-QUAD = QUAD 850/1300/1310/1550 nm,
IL and ORL
Connector a
EA-EUI-28 = APC/DIN 47256
EA-EUI-89 = APC/FC narrow key
EA-EUI-91 = APC/SC
EA-EUI-95 = APC/E-2000
EA-EUI-98 = APC/LC
Patchcord tips
FIPT-400-U12M = Universal patchcord tip for 1.25 mm ferrules
FIPT-400-U12MA = Universal patchcord tip for 1.25 mm ferrules APC
FIPT-400-U16M = Universal patchcord tip for 1.6 mm ferrules
FIPT-400-U20M2 = Universal patchcord tip for 2.0 mm ferrules (D4, Lemo)
FIPT-400-U25M = Universal patchcord tip for 2.5 mm ferrules e
FIPT-400-U25MA = Universal patchcord tip for 2.5 mm ferrules APC f
VFL and power meter
00 = Without VFL and power meter
VFL = With VFL
PM2X = With power meter; GeX detector
VPM2X = With VFL and power meter; GeX detector
Multifiber tips g
FIPT-400-MTP2 = MTP/MPO UPC tip for bulkhead adapter
FIPT-400-MTPA2 = MTP/MPO APC tip for bulkhead adapter
FIPT-400-MTP-MTR = MTP/MPO multirow UPC tip for bulkhead adapter
FIPT-400-MTP-MTRA = MTP/MPO multirow APC tip for bulkhead adapter
Wi-Fi and Bluetooth
00 = Without RF components
RF = With RF capability (Wi-Fi and Bluetooth)
Tip kits
FIPT-400-LC-K = LC tip kit including:
FIPT-400-LC: LC tip for bulkhead adapters,
FIPT-400-LC-APC: LC/APC tip for bulkhead adapter,
FIPT-400-U12M: Universal patchcord tip for 1.25 mm ferrules,
FIPT-400-U12MA: Universal patchcord tip for 1.25 mm ferrules APC
FIPT-400-LC-K-APC = LC tip kit including:
FIPT-400-LC-APC: LC/APC tip for bulkhead adapter,
FIPT-400-U12MA: Universal patchcord tip for 1.25 mm ferrules APC
FIPT-400-LC-K-UPC = LC tip kit including:
FIPT-400-LC: LC tip for bulkhead adapters,
FIPT-400-U12M: Universal patchcord tip for 1.25 mm ferrules
FIPT-400-MTP-MTR-K = MTP/MPO multirow APC and UPC tip for bulkhead adapter g
Inspection probe model b
00 = Without inspection probe
FP410B = Digital video inspection probe
Triple magnification
FP420B = Analysis digital video inspection probe
Automated pass/fail analysis
Triple magnification
Autocentering
FP425B = Wireless digital video inspection probe c
Automated pass/fail analysis
Triple magnification
Autocentering
Base tips
APC = Includes FIPT-400-U25MA and FIPT-400-SC-APC
UPC = Includes FIPT-400-U25M and FIPT-400-FC-SC
FP430B = Automated analysis digital video inspection probe
Automated focus
Automated pass/fail analysis
Triple magnification
Autocentering
FP435B = Wireless analysis digital video inspection probe c
Automated focus
Automated pass/fail analysis
Triple magnification
Autocentering
Example: MAX-945-SM1-EI-EUI-89-VFL-RF-FP435B-UPC
Notes
a. Connector adapters are the same on singlemode source ports, multimode source ports and power meter ports. Multimode connectors are always UPC.
b. Includes ConnectorMax2 software.
c. RF option mandatory and included with this model.
d. This list represents a selection of fiber inspection tips that covers the most common connectors and applications but does not reflect all the tips available. EXFO offers a wide range of inspection tips,
bulkhead adaptors and kits to cover many more connector types and different applications. Please contact your local EXFO sales representative or visit www.EXFO.com/FIPtips for more information.
e. Included when UPC base tips are selected.
f. Included when APC base tips are selected.
g. Includes a bulkhead adapter for patch cord inspection.
A z Ö n m é r é s t e c h n i ka i s z a k é r t ő j e :
EQUICOM Méréstechnikai Kft.
1162 Budapest, Mátyás király utca 12.
www.equicom.hu | info@equicom.hu
EXFO Headquarters
>
Tel.: +1 418 683-0211 | Toll-free: +1 800 663-3936 (USA and Canada) | Fax: +1 418 683-2170 | info@EXFO.com | www.EXFO.com
EXFO serves over 2000 customers in more than 100 countries. To find your local office contact details, please go to www.EXFO.com/contact.
EXFO is certified ISO 9001 and attests to the quality of these products. EXFO has made every effort to ensure that the information contained in this specification sheet is accurate. However, we accept no
responsibility for any errors or omissions, and we reserve the right to modify design, characteristics and products at any time without obligation. Units of measurement in this document conform to SI standards and
practices. In addition, all of EXFO’s manufactured products are compliant with the European Union’s WEEE directive. For more information, please visit www.EXFO.com/recycle. Contact EXFO for prices and
availability or to obtain the phone number of your local EXFO distributor.
For the most recent version of this spec sheet, please go to the EXFO website at www.EXFO.com/specs.
In case of discrepancy, the web version takes precedence over any printed literature.
SPMAX940/945.1AN
© 2016 EXFO Inc. All rights reserved.
Printed in Canada 16/06
Download PDF