GVA26LEDCP – 26″ (66cm) HD LED LCD TV Combo

26” (66cm)
HD LED LCD TV COMBO
/ GVA26LEDCP
Instruction Manual
2
Contents
Important safety instructions
3
Usage conditions and restrictions
3
Electrical safety, power cord and plug
4
Position
4
Cleaning and maintenance
4
Remote Control
6
Accessories
11
Assembly
12
Assembling the stand
12
Wall mounting
13
Controls and Connections
14
Getting Started
17
Basic Operation
18
Electronic Program Guide (EPG)
20
Recording - PVR Function
22
The on-screen Display (OSD) menu
25
Menu Options in TV Mode
26
Channel menu
26
Picture menu
27
Sound menu
28
Time menu
29
Lock menu
30
Media menu
34
Photo menu
34
Music menu
35
Movie menu
36
Text menu
36
Built-in DVD Player Operations
37
Specifications
43
FAQ’s
44
3
Important Safety Instructions
Read this manual thoroughly before first use and keep it in a safe place for future reference,
along with the warranty card, purchase receipt and carton. The safety precautions enclosed
herein reduce the risk of fire, electric shock and injury when correctly adhered to.
Usage conditions and restrictions
To prevent any injuries, the following safety precautions should be observed in the
installation, use, servicing and maintenance of equipment. Before operating this equipment,
please read this manual completely, and keep it nearby for future reference.
• Take notice of all the warnings.
• Do not use this TV near water.
• Clean only with a dry cloth.
• Do not block any of the ventilation openings.
• Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other TV’s
(including amplifiers) that produce heat.
• Do not alter the grounding type plug provided with the TV. A grounding type plug has two
blades and a third grounding prong. The third prong is provided for your safety. When the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the TV.
• Only use the attachments/accessories specified by the manufacturer.
• U
se only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the TV.
• Unplug this TV during lightning storms or when unused for long periods of time.
• The appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible
for their safety.
• Young children should be supervised to ensure they do not play with the appliance.
• Refer all servicing to qualified service personnel. Servicing is required when the TV has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the TV, the TV has been exposed to rain or moisture, does not
operate normally, or has been dropped.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
NOTE: The TV must not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the TV.
4
Important Safety Instructions
Electrical safety, power cord and plug
• Before installing this TV set, make sure your outlet voltage corresponds to the voltage
stated on the appliance rating label.
• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
• Do not overload the power cord or power outlet.
• Do not let the cord hang over the edge of a table or counter, or touch any hot surface.
• Do not allow anything to rest on or roll over the power cord and signal cable.
• Protect the power cord and signal cable from being trampled.
• Do not expose the power cord and signal cable to moisture.
Position
• If a television is not positioned in a sufficiently stable location, it can be potentially
hazardous due to falling. Many injuries, particularly to children, can be avoided by taking
simple precautions such as:
• Securely attaching the TV to the wall mount fastened on the wall.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the TV controls.
• Not standing the TV on cloth or other materials placed between the television and
supporting furniture.
• Not placing the television on tall furniture (for example, cupboards or bookcases)
without anchoring both the furniture and the television to a suitable support.
• When deciding on where to put the TV set, make sure the place is:
• Well ventilated.
• Away from damp and cold.
• Protected from overheating and away from direct sunlight.
• Away from moisture drips or splashes.
• Protected from excessive dust.
• Do not install this equipment in a confined space such as a bookcase or similar unit.
• Do not put any objects filled with liquids, such as vases, on top of the TV set.
• Do not place any naked flame sources, such as lighted candles, on top of the TV set.
Cleaning and maintenance
• Dust the TV set by wiping the screen and cabinet with a soft, clean cloth.
5
Important Safety Instructions
• Do not apply excessive force to the screen when cleaning.
• Do not clean the screen with water or chemical cleaners as this may damage the LED
screen surface.
• Do not dismantle this product by yourself, as this may cause damage. There are no userserviceable parts contained in the TV set.
• If your TV set has been damaged, contact the after sales support line for advice or take
it to a local service centre or for inspection or repair. No liability can be accepted for any
damage caused by non-compliance with these instructions or any other improper use or
mishandling of appliance.
CAUTION: TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
This symbol indicates that dangerous voltage constituting a risk of
electric shock is present within this unit.
This symbol indicates that there are important operating and
maintenance instructions in the documentation accompanying this unit.
TV with Class 1 construction shall be connected to a main socket outlet with a protective
earthing connection.
WARNING:
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR AN ELECTRIC SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTIONS: • T hese servicing instructions are for use by qualified service personnel only. To
reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.
• Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
6
6
Remote
Control
Remote
Control
The buttons on the remote control and similarly marked ones on the main unit perform
functions.
The similar
buttons
on the remote control and similarly marked ones on the main unit
perform similar functions.
1
2
TV/RADIO
AUTO
MUTE
3
4
18
19
5
-/-NICAM
ASPECT
SLEEP LANGUAGE
6
AUDIO
17
VOL
CH.
DISPLAY
SOURCE
7
8
OK
OK
16
15
14
LCD
MENU
EXIT
9
10
11
12
13
TITLE
P.MODE
INPUT PMODE
S.MODE SMODE
FREEZE DISPLAY
SLEEP
HOLD
EPG
FAV
FAV-
D.MENU
MEDIA
SIZE
SUBTITLE
EPG
ZOOM
HOLD
LANG SUBTITLE
INDEX
TEXT/MIX
GOTO
DVD SETUP
ANGLE REPEAT
A-B
*
7
Remote Control
TV Control Buttons
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
Power/Standby button ( )
TV/Radio select button / DVD eject button (TV/RADIO/ )
Mute button (MUTE )
Number buttons (0, 1~9 )
Channel return button (
)
Language / Audio language select button (LANGUAGE/AUDIO)
Channel select buttons (+ CH. -)
Input source select button (SOURCE)
Navigation keys ( / / / )
Confirm button (OK)
Menu exit button / DVD title button (EXIT/TITLE)
Information display button (DISPLAY)
Picture freeze button / Teletext hold button (FREEZE/HOLD)
Sound mode select button (S.MODE)
Picture mode select button (P.MODE)
Menu button (MENU)
Volume control buttons (+ VOL -)
Sleep timer button (SLEEP)
Multi-digits button (-/--)
EPG/D.MENU: Electronic program guide button / DVD disc menu button
FAV: Favorite program list button
SIZE/ZOOM: Teletext size button / DVD zoom/out button
SUBTITLE: Subtitle button
MEDIA: Media select button
: USB/DVD play/pause button
: USB/DVD fast-backward button
: USB/DVD fast-forward button
: USB/DVD stop button
: USB/DVD previous button
INDEX/
: Teletext index display button / DVD next button
TEXT/MIX: Teletext on/off mix button
GOTO: DVD go to button
ANGLE: DVD angle button
REPEAT: DVD repeat playback button
A-B: DVD A-B repeat button
/DVD SETUP Recording button/DVD setup menu button
* DVD and media buttons are explained in more detail on the following page.
8
8 Remote Control
Romote Control
DVD and Media Buttons
DVDmedia
mode, use
the buttons below for the following actions:
DVDInand
buttons
In DVD
mode,
use
buttons
belowplayback
for theangle;
following actions:
ANGLE:
Press
tothe
display
the current
ANGLE
press again to toggle between different
playback
angle codes
in sequence.
Press
to display
the current
playback angle;
Note: Select playback angle is only available if the DVD
has thisplayback
feature. angle codes in sequence.
ZOOM: NOTE:
Press toSelectable
zoom in on playback
the picture.angle is only
AUDIO: Press toavailable
select sound
mode.
if the
DVD has this feature.
SUBTITLE:
Press
display
subtitles
(if available).
ZOOM
Press
to to
zoom
in on
the picture.
D.MENU:
Presstotoselect
displaysound
the disc
menu.
AUDIO
Press
mode.
TITLE: PPress
ress toto
display
thesubtitles
title.
SUBTITLE
display
(if available).
E
F
PAG
V
FAV-
D.MENU
MEDIA
SIZE
SUE
BP
TIGTLE
ZOOM
HOLD
LANG SUBTITLE
INDEX
TEXT/MIX
GOTO
ANGLE REPEAT
A-B
DVD SETUP
D.MENU
Press
to display
the disc
menu.
[ ]: Press
to play,
or to pause
the DVD.
TITLE
Press
to display
thebackward
title.
[ ]: Press
repeatedly
to fast
there are five speeds for fast backward.
[ ] [ ] : Press
Press
to play, to
or fast
to pause
the
DVD.
repeatedly
forward,
there
are five speeds for fast forward.
[ ] [ ]: Press to stop the DVD display.
[
]: Press
to play the previous title/chapter/track.
backward.
[
]:
Press
to play the next title/chapter/track.
[ ]
GOTO: Press to activate the on-screen scroll down menu for editing.
[ ]
Press to stop the DVD display.
REPEAT: Press the YELLOW button to play back a portion automatically (choose between
[ ]
Press
to play the previousALL).
title/chapter/track.
OFF/CHAPTER/TRACK/REP
[ ] A-B: Press
Press
to
play
the
next
title/chapter/track.
the BLUE button to start the repeat portion from A-B.
GOTO
Press to activate the on-screen scroll down menu for editing.
TeletextPress
Buttons
REPEAT
the YELLOW button to play back a portion automatically (choose
TEXT/MIX:
Teletext
on/off /mix button
between OFF/CHAPTER/TRACK/REP
ALL) .
HOLD:
Teletext
hold
button
A-B
Press the BLUE
button to start the repeat portion from A-B.
SUBTITLE: Subtitle button
INDEX: Teletext index button
Teletext buttons
SIZE: Teletext size button
TEXT/MIX
FAST TEXT: The RED, GREEN, YELLOW & BLUE buttons are used for quick access to colour
HOLD
Teletext
holdtransmitted
button by FAST TEXT broadcast.
coded pages
SUBTITLE
Subtitle
button
Example: RED selects city information, BLUE selects travel information, GREEN
selects
weather information, YELLOW selects TV programming.
INDEX
Teletext index
button
SIZE
FAST TEXT
Teletext size button
The RED, GREEN, YELLOW & BLUE buttons are used for quick access to
colour-coded pages transmitted by FAST TEXT broadcast.
Example: RED selects city information, BLUE selects travel information,
GREEN selects weather information, YELLOW selects TV
programming.
9
Remote Control
Teletext function
Teletext or Austext is no longer available, nor is there any plan for a replacement teletext
service in Australia. For more information, please visit the websites of the Australian channel
providers.
However, one teletext option, “closed captions”, is still working on most Australian television
channels. This service allows you to activate subtitles while watching normal television
programs that provide it.
Accessing closed captions
While watching a program, press the teletext button (TEXT/MIX) on the remote control, then
enter the numbers 801 on the remote control to activate the subtitles. To exit the subtitles,
press the TEXT/MIX button again.
10 10
10
Remote
Control
(Cont.)
Remote
Control
(Cont.)
Remote Control (Cont.)
Inserting
Batteries
Inserting
batteries
•
Remove
the battery cover located on
Inserting
batteries
Remove the battery cover located on the back of
the
back of the remote control by gently
by gently
Removethe
theremote
batterycontrol
cover located
onpushing
the backdown
of the
pushing
down
the
cover
and
pulling
cover
lock
and
pulling
the lock
cover
upwards.
the remote
control
by gently
pushing
down
the
cover
upwards.
cover the
lock
andtwo
pulling
coveror
upwards.
Insert
AAAthe
Alkaline
equivalent batteries,
•
Insert
two
AAA+/-Alkaline
or
following
the
marking
inequivalent
the
battery
Insert two AAA Alkaline
or
equivalent
batteries,
compartment.
batteries,
marking in the
following
the +/-following
marking inthe
the +/battery
compartment.
Replacecompartment.
the battery cover.
battery
Replace
the battery
cover. cover.
•
Replace
the battery
Insert two AAA batteries.
Insert two AAA batteries.
Precautions
when
usingbatteries
batteries
Precautions
when
using
Precautions
when
using
batteries
Donot
notuse
use
old and
and
new
together.
•
Do
old
newbatteries
batteries
together.
Do
use
oldused
and new
batteries
together.
• notDo
not
different
types
of battery (for example, Manganese and Alkaline batteries)
Note that there are chargeable and non-chargeable batteries. Do not attempt to charge nontogether.
chargeable
batteries.
Note
there
chargeable
and non-chargeable
batteries. Dobatteries.
not attempt
charge
non- to charge
• that
Note
thatare
there
are chargeable
and non-chargeable
Dotonot
attempt
chargeable
batteries.
nonchargeable
batteries.
Always remove the
batteries if the remote control is not going to be used for more than a month.
Batteries
leftbatteries
in itthe
maybatteries
damage.
•
Always
remove
if the
remote
control
is be
notused
going
to bethan
useda for
more than
Always
remove
the
ifcause
the remote
control
is not
going to
for more
month.
Batteries
left
in
it
may
cause
damage.
sunlight
or lightning
cause
thedamage.
remote control unit to operate erratically.
aBright
month.
Batteries
left in itmay
may
cause
Bright
sunlightsunlight
or lightning
may causemay
the remote
control
unit to
operateunit
erratically.
•
Bright
or lightning
cause the
remote
control
to operate erratically.
Control
Range range
Control
Control range
30 30
30 30
Remote sensor
Remote sensor
Range: 8m, 60° angle
Range: 8m, 60° angle
To use
remote
control,point
pointitittowards
towards the
sensor
at the
front
of the
To use
the the
remote
control,
theremote
remote
sensor
at the
front
oftelevision.
the television.
Theremote
remotecontrol,
controlpoint
has aitrange
of up
toremote
approximately
eight
metres
from
the TV at an angle
To use
the
towards
the
sensor
at
the
front
of
the
television.
The remote
control
has
a
range
of
up
to
approximately
eight
metres
from
the
TV at an angle
of upcontrol
to 60 degrees.
The remote
has a range of up to approximately eight metres from the TV at an angle
of
up
to
60
degrees.
of up to 60 degrees.
NOTE: The remote control will not operate if its path is blocked.
NOTE:
TheThe
remote
control
will not
operate
if its pathif isitsblocked.
NOTE:
remote
control
will
not operate
path is blocked.
11
Accessiores
Accessories
11
The c
omponents ma
ent from the following
illustration.
The configuration of the components may look different from the following illustration.
Instruction
Manual
Remote
control
Batteries
12
12
Assembly
12
Assembly
Assemblythe stand
Assembling
Assembling the stand
Assembling the stand
To attach the stand, place the stand on the neck of the TV, insert and tighten the screws
To attach the stand, place the stand on the neck of the TV, insert and tighten the screw
To
attach
thearea.
stand, place the stand on the neck of the TV, insert and tighten the screws
in the
circled
in the
thecircled
circledarea.
area.
in
65
50
50
65
To remove the stand
Toremove
remove
the stand
the
To
the stand
stand,
remove the screws in the circled area and the neck will c
.
Toremove
remove
stand,
remove
the screws
in the
circled
area
To
thethe
stand,
remove
the screws
in the circled
area
and the
neckand
will the
comeneck
off. will c
50
65
50
65
.
1313
Assembly
(Cont.)
Assembly
(Cont.)
Wall-mounting
Wall-mounting
The television set is equipped with holes on the back panel for use with wall mounting
Thebrackets
television
is equipped
holes
on the
back
for use
with
wall-wall(notset
included).
Pleasewith
use the
image
below
as apanel
reference
when
buying
mounting
brackets
(not
included).
Please
use
the
image
below
as
a
reference
when
mounting brackets.
buying wall-mounting brackets.
NOTE: The distance between the holes is 100 x 100mm in width and height.
NOTE: The distance between the holes is 100 x 100mm in width and height.
100
100
For wall-mounting, remove all Four screws to
remove the entire stand assembly.
NOTE: T he screws in the package are for securing the TV stand only. If you are wall-mounting
NOTE: The
screws
in the
packageinstaller
are for for
securing
TV standononly.
If you
are and wall
the
TV, consult
a qualified
further the
instructions
bracket
support
installer
for
further
instructions
on
wall-mounting
the
TV,
consult
a
support.
bracket support and wall support.
14
14
Controls and Connections
Controls14and Connections
14
Controls and Connections
Controls and Connections
8. RF: Antenna/cable TV input socket
(RF 75Ω)
2
8. RF: Antenna/cable TV input socket (RF 75Ω)
2
2
5
5
5
Disc slot
Disc slot
Disc slot
3
3
)
3
Power supply :
Power
supply
Ensure your mains
voltage
and:
Ensure your mains voltage and
Power
supplywith
: those
frequency cor
respond
frequency
cor respond with those
supply
:mains
your
voltage and
on the Power
TV rEnsure
ating
label
.
on
the
TV
rvoltage
ating label
. frequency correspond with those on
Ensure
your mains
and
frequency
cor respond
with
those
For the DVD
General controlGeneral
buttons
Forplayer
the DVD player
control
buttons
on the
TV label.
r ating label .
the TV
rating
8.
P
lay
/
Pause
) (
button
8. PDVD
/player
Pause( button
1. Power/Stand-by
button
( ) button ( )
1.
Power/Stand-by
For
General
control
buttons
Forthe
the lay
DVD
player
General
control
buttons
9. /Ejec
9. Ejec8. tPbutt
on
(t butt
) on ( )
2. Inputbutton
sourbutton
ce
select
lay
Pause
button
2. Input1.
sour
select
(SOURCE)
1.ce
Power/Stand-by
button
Power/Stand-by
( (button
) ) (SOURCE)
8. Play/Pause
button( ( ) )
3. Menu
button
(MENU)
9. Ejec t butt on ( )
Input
source
select
2. Input
sour ce
selectbutton
button(SOURCE)
(SOURCE)
3. Menu2.button
(MENU)
9. Eject button ( )
4. Channel
do wn button ( CH )
3.
Menu
button
(MENU)
3.
Menu
button
(MENU)
4. Channel do wn button ( CH )
4. Channel
down
button
( (CH
v)) )
5. Channel
up
button
( CH
4. Channel
do wn
button
CH
5. Channel up button ( CH )
5. Channel
up
button
(
CH
^
)
6.
Volume
decrease
butt
5. Channel up button ( CH ) on ( VOL - )
6. Volume
decrease
butt onbutton
( VOL -()VOL - )
6. Volume
7. decrease
Volume
increase
button
6. Volume
decrease
butt on
( VOL( -VOL+)
)
7. Volume
increase
button
7. Volume
increase
( VOL+)( VOL+)
10. button
Remote
7. Volume
increasesensor
button ( VOL+)
10. Remote
sensor
10. Remote
sensor
11. Power
indicator
10.
Remote
sensor
11. Power indicator
11. Power 11.
indicator
Sockets
(rear and side panel)
indicator
SocketPower
(rear and
side panel)
Sockets
(rear
and
side
panel)
Sockets1.(rear
and
side
panel)
1. L/R/VIDEO:
Composite
& video
sockets
L/R/VIDEO:
Composite
audio audio
& video
inputinput
sockets
2.
HDMI:
H
igh
Definition
Multimedia
Interface
input
sockets (HDMI
1.
L/R/VIDEO:
Composite
audio
&
video
input
sockets
1. L/R/VIDEO: Composite audio & video input sockets
3.
USB: USB port
1/2/3)
3. USB:
USB
port
4. USB
COAXIAL
3. USB:
port OUT: Coaxial output socket
3. USB: 4.
USB
port5. YOUT:
COAXIAL
Coaxial
output
Pb/Cb
Pr/Cr:
Component
video input sockets
4. COAXIAL OUT:
Coaxial
outputsocket
socket
4. COAXIAL
OUT:6.Coaxial
output
socket
5. Y 5.Pb/Cb
Pr/Cr:
Component
video
sockets
PC
AUDIO:
PC
audio
input
socket
Y Pb/Cb Pr/Cr: Component video input
input sockets
6. PC
AUDIO:
PC
audio
input
socket
5. Y Pb/Cb
Pr/Cr:
Component
video
input
sockets
7.
VGA:
VGA
interface
input
socket
6. PC AUDIO: PC audio input socket
7. VGA:
VGA
interface
input
socket
8.audio
RF:
Antenna/cable
input socket (RF 75Ω)
6. PC AUDIO:
PC
input socket
7. VGA:
VGA
interface
inputTV
socket
8.
RF:
Antenna/cable
TV
input
socket
(RF 75Ω)
7. VGA: VGA interface input socket
15
Controls and Connections (Cont.)
Controls
and Connections (Cont.)
AV Connection
Controls and Connections (Cont.)
AV Connection
3
AV Connection
Controls and Connections (Cont.)
3
AV Connection
3
Component (YPbPr)
Component (YPbPr) Connection
Component 2(YPbPr)
2
Component (YPbPr)
2
3
3
3
USB Connection
USB Connection
USB Connection
3
3
USB Connection
3
15
15
15
16
16
16
Controls
and Connections (Cont.)
Controls
Controlsand
andConnections
Connections(Cont.)
(Cont.)
VGA (PC Connection)
VGA (PC Connection)
VGA (PC Connection)
2
2
NOTE (A): Only for PCs that have an audio terminal.
NOTE
(A):P
forrefer
PCs that
havecomputer’s
an audio terminal.
NOTE
(B):
Only
lease
to
your
documentation for instructions on how to enable
NOTE
(A):
Only for
PCsto
that
an audiodocumentation
terminal.
NOTE
(B):
Please
refer
yourhave
computer’s
for instructions on how to enable
NOTE
(B):
Please
refer
to sound
your
documentation
for instructions on how to enable
the
video
and
output
via
these connections.
the
video
and
sound
output
viacomputer’s
these
connections.
the video and sound output via these connections.
HDMI
Connection
HDMI
Connection
HDMI Connection
2
2
17
Getting Started (Cont.)
Getting Started (Cont.)
17
17
First Time installation
1.
2.
First time installation
First time
installation
Connect
the antenna
to the RF 75Ω socket.
1. Connect
the
antenna
to the
RF 75Ω socket.
Turn
on the TV.
The
First Time
Installation
menu will be displayed on the screen, as
1. Connect
the
antenna
to the
RF 75Ω socket.
2.
Turn
on
the
TV.
The
First
Time
Installation menu will be displayed on the screen,
below:
2. Turn on the TV. The First Time Installation menu will be displayed on the screen,
as below.
as below.
Portugues
Portugues
3. Press
Press // on
on the
the remote
remote control
control to
to select
select the
the desired
desiredtuning
tuningtype:
type:
3.
Press / DTV
on the
remote
control
to select the desired tuning type:
digital
channels
(SD/HD)
DTV -- digital
channels
(SD/HD)
DTVATV
- digital
channels
(SD/HD)
analogue
channels
only
ATV -- analogue
channels
only
ATVATV
- analogue
onlyavailable in your area
+ DTV
DTV --channels
all channels
channels
ATV +
all
available in your area
ATV
+ DTV/ - all
channels
available
area
4. Use
Use the
the
navigation
keysinto
toyour
select
thedesired
desiredlanguage,
language,then
thenpress
press
4.
/ /// //navigation
navigation
keys
select
the
Use
the
/
/
keys
to
select
the
desired language
language,ofthen
press
[OK] to
to enter
enter the
the Channel
Channel Tuning
Tuning screen.
screen.The
The default
default
thisTV
TVisis [OK] to
[OK]
language
of
this
enterEnglish.
the Channel Tuning screen. The default language of this TV is English.
English.
5. The TV
will start searching channels automatically from the lowest frequency. When
5. The
The TV
TV will
will start
start searching
searching channels automatically
automaticallyfrom
fromthe
the lowestfrequency.
frequency.
it5.finds
a station,
it will store thischannels
in the first location and
move tolowest
the next. When auto
tuning is completed, the TV will display the channels in logical channel number (LCN)
next. When auto tuning is completed, the TV will display the channels in logical
order.next. When auto tuning is completed, the TV will display the channels in logical
channel number (LCN)
(LCN) order.
order.
channel
6. Press [MENU]number
or [EXIT] to cancel
the auto tuning.
6.
Press
[MENU]
or
[EXIT]
to
cancel the
the auto
auto tuning.
tuning.
6. Press [MENU] or [EXIT] to cancel
TV information
TV information
information
Press TV
[DISPLAY] to display the channel information.
Press
[DISPLAY] to
to display
display the
the channel
channel information.
information.
Press [DISPLAY]
3.
4.
Current
Current channel
channel name
name
Channel number
18
18
Basic Operations
18
Basic
Operations
Basic
Operations
Make
sure all
necessary connections are correctly made before connecting the unit
to the wall socket and turning on the power. The power indicator turns red and the
Make
necessary
connections are correctly made before connecting the unit to the
unitsure
issure
inallstand-by
mode.
Make
all necessary
connections are correctly made before connecting the unit
wall socket and turning on the power. The power indicator turns red and the unit is in standto the wall socket and turning on the power. The power indicator turns red and the
by mode.
unit
is in
stand-by mode.
Power
on/off
Power
Presson/off
on the remote control (or on the side of the TV) to turn on the power to the
Power
Press
onon/off
the remote
control
(orfrom
on the
of the TV)
to turn
on the power to the TV. The
TV. The
power
indicator
turns
redside
(stand-by)
to blue
(on).
power
indicator
turns
fromcontrol
red (stand-by)
to side
blueof
(on).
To
turn
the TV
off,
press
The
unit will
Press
on the
remote
(or
on
the
the
TV)
to
turn
onand
thethe
power
to
the
The unit will switch to stand-by mode
power
switch
to stand-by
mode and
thefrom
power
indicator
turns
red. (on).
TV.
The
power
indicator
turns
red
(stand-by)
to
blue
indicator turns red.
The unit will switch to stand-by mode and the power
Volume adjustment
indicator
turns
red.
Volume
adjustment
Press [VOL-] to reduce the volume, press [VOL+] to increase the volume.
Press [VOL-] to reduce the volume, press [VOL+] to increase the volume.
Volume adjustment
Press [VOL-] to reduce the volume, press [VOL+] to increase the volume.
or
or
Mute function
Press
[MUTE
Mute
function
Mute
function
again
(or
the] [on the
/ remote
] button)
to restore
the sound.
Press
[MUTE
control
to switch
off the sound temporarily, press it again (or
+
thePress
[ /[MUTE
] button) to restore the sound.
again (or the [ / ] button) to restore the sound.
TV channel selection
TV channel selection
To select your TV channel, select analogue (ATV) or digital (DTV) as input source first, then
TV channel
selection
then
choose
your channel
onefollowing
of the following
choose
your
channel
one of the
ways: ways:
tPress [CH ] or [CH ] on the main unit.
choose
your
channel
one
of
theunit.
following
ways:
tPress
[0–9]
[-/--]
if necessary)
to input
the channel number directly.
• then
Press
[CH ^](combined
or [CH
v ] on
the
main
tPress
[CH
]
or
[CH
]
on
the
main
unit.
• tPress
Press [LAST
[0–9] (combined
[-/--]toif the
necessary)
input the
channel
number
directly.
CH] to go back
previoustochannel
you
watched
last time.
[-/--] iftonecessary)
to input
theyou
channel
number
directly.
• tPress
Press [0–9]
[LAST(combined
CH] to go back
the previous
channel
watched
last time.
tPress [LAST CH] to go back to the previous channel you watched last time.
or
or
19
Basic Operations (Cont.)
Input source
Make sure you have the external input device (such as a home theatre) properly connected.
Turn on the external device and press [SOURCE] on the TV remote control to select it. The
input source menu appears.
1.
2.
Use the up/down navigation keys / to move the highlighted bar to the desired
source item.
Press [OK] or to confirm, information of the selected source name will appear on the TV
screen for a few seconds.
Information display
Press [DISPLAY] on the remote control, the related information about the current source will
appear on the screen automatically.
Picture mode
Press [P.MODE] repeatedly on the remote control to select your desired picture mode from
the four available: Standard, Dynamic, Mild, Personal.
Sound mode
Press [S.MODE] repeatedly on the remote control to select your desired sound mode from the
five available: Standard, Music, Movie, Sport and Personal.
Audio language
For some programmes with audio language options, pressing [LANGUAGE] will display the
different audio language options for selection.
Sleep Timer
The sleep timer automatically switches off the power after a preset time has elapsed. There
are eight time periods available, press [SLEEP] on the remote control repeatedly to select
your desired time period:
Off 10 min 20 min 30 min
180 min 240 min Off
60 min
90 min
120 min
Once you have finished setting the sleep timer, it will start automatically.
To check for how much longer the TV will remain on until it switches off, press the [SLEEP]
button on the remote control and the remaining sleep time will appear on the screen for a
few seconds.
20
20
30
30
EPG
Guide)
EPG
(ElectronicProgram
Program
Guide)
EPG(Electronic
(Electronic
Program
Guide)
EPG (Electronic Program Guide)
18
Powering the LED
EPG
30 and offers
EPGstands
standsfor
forDigital
DigitalElectronic
ElectronicProgram
ProgramGuide.
Guide.ItItisissupplied
suppliedby
bythe
theprogram
programproviders
providers
EPG stands
for Digital
Electronic
Program Guide. It is supplied by the program providers
Powering
the
EPG stands
forLED
DigitalTV
Electronic Program Guide. It is supplied by the program providers
information about the program to be broadcast. You can access it in digital mode by pressing the18
mode by pressing the EPG button on the remote control, the18
menu will appearToonturn
thethe power ON or OFF:
mode
by
pressing
the
EPGEPG
button
on
the
remote
control,
the
menu
will
appear
on
EPG
button
on
the
remote
control,
the
menu
will
appear
on
the
screen,
ason
below:
Powering
the
LED
TVwill
mode
by
pressing
the
button
on
the
remote
control,
the
menu
appear
thethe
Toscreen,
turn
the
power
ON
or OFF:
1) Make sure that the power cable is pr
as
screen,
asbelow:
below:
EPG (Electronic Program Guide)
screen,
as below:
Powering
the
LED TV
1) Make sure that the power cable is properly plugged.
Powering the LED TV
2) Press the “STANDBY” button on the r
EPG stands for Digital Electronic Program
Guide.
is supplied
the program providers
Tocontrol.
turn
theItpower
ON orby
OFF:
2) Press the “STANDBY” button on the remote
NOTE: Make sure that you are aiming a
To turn the power ON or OFF:
To
turn the plugged.
power ON or OFF:
1)sensor
Make
surecontrol,
that
the
power
is properly
NOTE:mode
Makeby
sure
that you
aiming
at on
thethe
from
the TV.
pressing
theare
EPG
button
remote
the
menucable
will appear
on the
1) Makescreen,
sure that
the power cable is properly2)plugged.
1) Make
surecontrol.
that the power cable is properly plugged
Press the “STANDBY” button on the
remote
as below:
2) Press the “STANDBY” button on the remoteNOTE:
control.
2) Press
the
“STANDBY”
button
Make sure that you are aiming
at the
sensor
from the
TV. on the remote
First Time Installa
First Time Installation
NOTE: Make sure that you are aiming at the sensor from the TV.
First Time Installation
Default
NOTE: Make sure that you are aiming
at the sensor fr
Default
First Time Installation
First Time Installation
Default
Default
Default
When you switch on the TV for the
will be displayed on the screen
When you switch on the TV for the rst time, the First Time Installation menu
18
will be displayed on the screen.
buttons to selec
- Use the
NOTE:
mode
is
power
saving
mode, press th
NOTE:
buttons
to
select
the
power-saving
mode
and
the
“Default”
- Use
the
When
you
switch
on
the
TV
for
the
rst
time,
the
First
Time
Installation
menu
NOTE:
W
hen
the
TV
is
first
turned
on
(in
DTV
mode),
no
EPG
information
is
displayed.
If
still
no
EPG
NOTE:
no
EPG
information
is displayed
afteryou
you
have brought
up
EPG
menu,
use- use
the the
/
Use
buttons
no EPG
information
isrst
displayed
after
have
brought
upthe
the
EPG
menu,
mode
is power
saving
mode,
press
the
button
to
exit.
will
be
displayed
on
the
screen.
When
you
switch
on
the
TV
for
the
time,
the
First
Time
Installation
menu
When
you
switch
on
the
TV
for
the
rst
time,
the F
information
is displayed
after
you
brought
upbrought
the
EPGup
menu,
use menu,
/ use
thegoand
/ page.
still
noand
EPGbuttons
isthe
displayed
after
you
have
the
EPG
/ information
buttons
tonavigate
navigate
to
thehave
channel
you
wish
to
display
the
information
from
button
to
to the next
- Use
select
language
and then
use
the
OKto
and on
to
the
channel
you
wish
display
information
from
will
bethe
displayed
the buttons
screen. toto
willpower-saving
be the
displayed
on theand
screen.
buttons
to
select
the
mode
the
“Default”
Use
the
To
turn
the
power
ON
or
OFF:
Use
the
buttons
buttons
to
navigate
to
the
channel
you
wish
to
display
the
information
from
and
when
it
is
and
when
it
is
highlighted,
press
OK
on
the
remote
control
to
activate
it.
and
/ buttons
toOK
navigate
to
the mode,
channel
you
wish to
display
the
button tothe
go towhen
the/ next
page.
and
it
isselect
highlighted,
press
the
remote
control
to
activate
it.
mode
ison
power
saving
press
the
button
to exit.
NOTE:
buttons
toactivated
the
power-saving
mode
and
the
buttons
totoselect
power-saving
moD
- -Use
Use
the(Channel),
button
start the
searching
for all the
Usethe
the
buttons
to
select
country
and
then
use
OK
Once
you have
aMake
channel,
use
the
/control
buttons
to
goproperly
to on
theit.-the
top
row
thento
1)
sure
that
the
power
cable
is
plugged.
highlighted,
press
OK
onthe
the
remote
to“Default”
activate
information
from
and
when
it
is
highlighted,
press
OK
remote
control
Use
the
buttons
to
select
the
language
and
thena use
the
OK
Once
you
have
activated
a
channel,
use
the
buttons
to
go
to
the
top
row
(Channel),
mode
is
power
saving
mode,
press
the
button
to
exit.
mode
is
power
saving
press
the
butt
may
take
few
minutes.
no
EPG
information
is
displayed
after
you
have
brought
up
the
EPG
menu,
use
the
/
button to
start
searching
for
all theup
DTV/Radio
programs
inbroadcast
your area.and
Thisthe / buttons to move up mode,
use
the
button
to
bring
the
programs
to
be
button
to
gobutton
totothe
next
2) Press
the
“STANDBY”
on
thepage.
remoteand
activate
it.buttons
- Use
the
- control.
Use
the
the
and
then
use
the
OK
buttons
to select is
the
language a
then
theminutes.
button to
toselect
bring
up
the
programs
be
broadcast
the
buttons
to searching
- When
auto
complete
may
takeuse
a few
and
/ buttons
to
navigate
tolanguage
the
channel
you
wish
to
display
information
from
-use
Use
the
buttons
tothe
select
the
andnext
then
use OK
to
goand
to the
next
page.
button
tocountry
go
toTV.
the
page.
Once
you
have
activated
a achannel,
the
/remote
buttons
to
go
to
the
top
row
(Channel),
NOTE:
Make
sure
that
you
are
aiming
at
the
sensor
from
the
when
it complete,
is
highlighted,
OK
on
the
control
to
activate
it.
rst
channel
found.
-button
When
auto
searching
is
yourpress
TV will
show
the
Once
you
have
activated
channel,
use
the
/
buttons
to
go
to
the
top
row
(Channel),
then
use
buttonand
to start
searching
for all the
DTV/Radio
programsbuttons
in your area.
This
- Use
theuse the
buttonstotobring
selectup
thethe
country
then
use OK
- and
Use
the
button
programs
to
broadcast
/ thenbuttons
to to select the countr
then
you searching
haveto
activated
athe
channel,
usemay
the
/ buttons
tobe
go
to and
the
(Channel),
take
a few
minutes.
theOnce
button
bring
up
the
programs
to
be
broadcast
therow
/ theto
buttons
to move
andDTV/Rad
button
toPVR/Record
start
for all
DTV/Radio
programs
in your
area.
Thistop
button
start
searching
forup
all the
You
can
select
between
use the
button
to bring up the programs
to auto
be broadcast
the / buttons
to will
move
up
- When
searchingand
is complete,
your take
TV
show
the rst channel found.the
may
take
athe
fewdifferent
minutes.
may
a few
minutes.
down
timeslots.
equipment connected to the
To
record
a selected
program,
press
REDsignal
button other
and insert an
YouPVR/Record
can
select
between
the TV
signal
thethe
input
found. - When auto searching
- When
auto
searching
is complete,
yourand
TV will
show
the rstofchannel
is complete,
your
TV will
Use this
function to
switch
t sho
To record
a selected
program,
thefor
RED
button
and insert an
equipment
connected
to device
the TV. (seepress
appropriate
USB
page 35
more
on this).
Default
Use
this functionUSB
to switch
to (see
the input
wishon
tothis).
view.
appropriate
device
pagesource
35You
foryou
more
PVR/Record
can select between the TV signal and the inputPress
signalSOURCE
of other button on the r
PVR/Record
PVR/Record
To can
record
a between
selected
program,
press
the
REDsignal
button
and to
insert
an You can select between
Press
SOURCE
button the
on
the
remote
control.
Display
equipment
connected
the TV.
Press the TVtosignal
moveand
to desir
You
select
TV
signal
and
the
input
of
other
the input si
recordaaselected
selected program,
press
the the
RED RED
button
and insert
aninsert an appropriate USB device.
ToTo
record
program,
press
button
Useinformation
this function
toand
switch
to the
input
sourceconnected
you wish totoview.
appropriate
USB
device
. input
equipment
connected
to the
TV.
equipment
TV. to select or con
Press
to
move
desired
source.
Press
the
GREEN
button
to display
the
about
the DTV
program.
Press OKthe
button
Display
appropriate
USB
device
(see
page
35
for
more
on
this).
Use this function to switch to the input source
youSOURCE
wish to view.
Use control.
this function to switch to the input sourc
Press
button
on the
remote
rm. the
Press
OKthe
button
to select
or con
Press
GREEN
button
to display
information
about the
DTV
program.
Schedule
Press
SOURCE
button on the remote control.
Presssource.
SOURCE button on the remote control
Display
Press
to
move
to
desired
input
Display
Display
Press
the
YELLOW
button
to bring
up ainformation
schedule of programmed
recordings.
Press
to
move
to
desired
input
source.
Press
to move to desired input sourc
Press
the
GREEN
button
to
display
the
about
the
DTV
program.
rm.
Press
OK
button
to
select
or
con
Press
the
GREEN
button
to
display
the
information
about
the
DTV
program.
Press
the GREEN button to display the information about the DTV program.
Schedule
rm. you switch on the TV for the rst time, the
Press OKRemind
button to select or con When
Press
OKTime
button
to selectmenu
or con rm.
First
Installation
Press
the YELLOW button to
bring up a schedule of programmed recordings.
Schedule
will be displayed on the screen.
Schedule
Press the BLUE button and use the / buttons to navigate between programs.
Press the YELLOW button to -bring
up a schedule
of programmed
recordings. mode and the “Default”
Schedule
buttons
to select the power-saving
Use the
Powering the LED TV
Time Installation
Selecting an InputFirst
Source
Selecting an Input So
Selecting an Input Source
Selecting an Input Source
Selecting an Input Source
Press
theYELLOW
YELLOW
button
tobring
bring
upa aschedule
schedule
programmed
recordings.
Remind
isup
power
saving mode,
press the
button to exit.
Press
the
button
ofofprogrammed
recordings.
Next
Day/Prev
Day to mode
Remind
-use
Use
the
buttons
to selectbetween
the language
and then use the OK
Press
the BLUE button
buttons
to
navigate
Press
key to and
select
thethe
information
about
next
day/previous
day. programs.
button/ tobuttons
go to the
next page.
to navigate
between programs.
Press the BLUE button and use the
Remind
- Use the
buttons to select the country and then use OK
Remind
button
searching
for
allnavigate
the DTV/Radio
programs
in your area. This
Next
Day/Prev
Day and
Next
Day/Prev
Day
Press
the
BLUEbutton
button
anduse
use
theto start
/ buttons
buttonsto
tonavigate
between
programs.
/
between
programs.
Press
the
BLUE
the
may take a few minutes.
Press
Press
keytotoselect
select
information
about
next day/previous
key
thethe
information
about
next day/previous
day. day.
- When auto searching is complete, your TV will show the rst channel found.
NextDay/Prev
Day/PrevDay
Day
Next
Selecting
an
Input
Source day.
Press
/
key
selectthe
theinformation
informationabout
aboutnext
nextday/previous
day/previousday.
/ key totoselect
Press
You can select between the TV signal and the input signal of other
equipment connected to the TV.
Use this function to switch to the input source you wish to view.
21
PVR and Time shift Operation
patible USB storage device is connected. PVR allows you to record digital TV
21prog
PVRatand
Time
Shiftallows
Operation
ayback
a later date.
Timeshift,
you to pause live TV and then fast forwa
nd until
youand
catch Time
up to theshift
live TV stream
again. PVR and timeshift functions ar
PVR
Operation
This
supportsPersonal
Personal
Video
Recorder
(PVR
) and
time
shift
functions
when
a compatible
This television
television
support
Video
Recorder
(PVR)
and
time
shift
functions
when
aanalog
compatible
available
on Digital
TV
input
source
and
cannot
be
used
to record
TV or
USB
is connected.
connected.PVR
PVRallows
allowsyou
youtotorecord
recorddigital
digital
programs
playback
USB storage
storage
device is
TVTV
programs
forfor
playback
at aat a
input
sources.
This television support Personal Video Recorder (PVR) and time shift functions when a compatible
later date.
time. Time Shift
forward
oror
rewind
until
you
catch
later
shift,allows
allowsyou
youto
topause
pauselive
liveTV
TVand
andthen
thenfast
fast
forward
rewind
until
you
catch
USB storage device is connected. PVR allows you to record digital TV programs for playback at a
up to
to the live TV stream
TVTV
input
up
streamagain.
again.PVR
PVRand
andTime
timeShift
shiftfunctions
functionsare
areonly
onlyavailable
availableononDigital
Digital
input
later
time.and
Time Shift
allows
you to pause
live
TV
and then
fastDe
forward
or rewind until you catch
ing
up
C
onnecti
ng
a
Stora
ge
vice
input
sources.
source
and cannot be
used
to
record
analog
TV
ororother
be
used
to
record
analog
TV
other
input
sources.
source
up to the live TV stream again. PVR and Time Shift functions are only available on Digital TV input
source and cannot be used to record analog TV or other input sources.
Setting up
up and
and Connecting
Setting
ConnectingaaStorage
StorageDevice
Device
Setting up and Connecting a Storage Device
er supply
as the USB port in the TV may not be used to power large devices.
The first step to using PVR functionality is to set up and connect a compatible USB storage device
USB
inport
the TV
mayTV
not
be not
usedbe
toused
power
devices.
as
theport
USB
in
the
may
tolarge
power
large
devices.
such
as a flash
drive
or external
disk. External
hard disks
will
require their own power supply as the
event
datanotloss,
it istonot
recommended
that you connect a disk drive
USB accidental
port in the TV may
be used
power
large devices.
To prevent
prevent
accidental
data
ititisisnot
you
connect
drive
to to
thethe
elevision
for PVR
that already
data. It isthat
best
to
use aa disk
formatted
and
To
accidental
dataloss,
loss,contains
notrecommended
recommended
that
you
connect
anewly
disk
drive
television for PVR that already contains data. It is best to use a newly formatted and dedicated disk
To prevent
accidental
data loss,
it is notdata.
recommended
connect
a disk drive
television
for
PVR
that already
contains
It is best tothat
useyou
a newly
formatted
and to the
dedicated
disk
for
recording.
for recording.
televisiondisk
for PVR
that already contains data. It is best to use a newly formatted and dedicated disk
dedicated
for recording.
for recording.
PVR File
System
PVR File
System
PVR File System
PVR File System
Whendo
connecting
a new drive
for
theFile
first time,
you need to check
the file system
and
format the
the disk.
access
thePVR
PVR
System
SETUP
menu.
theTo
disk. To this,
do this,
access the
File System
optionoption
from thefrom
SETUPthe
menu.
disk. To do this, access the PVR file system option form the SETUP menu.
SETUP
OSD Language
TT Language
Hearing Impaired
PVR File System
Aspect Ratio
Blue Screen
First Time Installation
Reset
Software Update(USB)
English
West
Off
16:9
On
1. Ensure the input source is set to “DTV”.
1. Ensure the input source is set to “DTV”.
2. Press the MENU button to display the SETUP Menu.
arrow button
to select
FILEthe
SYSTEM
the SETUP menu and Press OK.
3. Press
Pressthe
thethe
MENU
toPVR
display
SETUPfrom
Menu.
3. 2. Press
arrow to select
PVR FILE
SYSTEM
from the SETUP menu and press OK.
2. Press
the the
MENU
button
toPVR
display
the SETUP
3. Press
arrow
to select
FILE SYSTEM
from theMenu.
SETUP menu and Press OK.
1. Ensure
the
input
source
is
setthe
to SETUP
“DTV”.Menu.
2.1. Press
thethe
MENU
button
toisdisplay
Ensure
input
source
set to “DTV”.
22
22 36
Speed
Choose
the
want
to
record.
Speed
36
22
Choose the
the disk
disk for
for storing
storingSpeed
the content
content you
you
want
to
record.
youwant
wantto
torecord.
record.
36 Time Shift
36
Choose
thedisk
diskfor
forstoring
storingSpeed
thecontent
contentyou
Choose
the
disk
for
storing
the
content
you
want
to
record.
Speed
Choose
the
disk
for
storing
the
content
you
want
to
record.
PVR and
Operation
Choose
the
the
Speed
4.
Speed
36
Choosethe
thedisk
diskfor
forstoring
storingSpeed
thecontent
contentyou
youwant
wantto
torecord.
record.
36
Choose
the
disk
for
storing
the
content
you
want
to
record.
Choose
the
you
want
to
record.
Choose
the
disk
for
storing
the
content
Speed
36
Choose
the
disk
for
the
content
PVR
and
Time
Shift
Operation
Choose
theFile
disk
forstoring
storingSpeed
the
contentyou
youwant
wantto
torecord.
record.
Check
PVR
System
PVR
Time
shift
Operation
Choose
the
disk
for
storing
the
content
you
want
to
record.
Check
PVR
File
System
Free
Record
Limit
66 H
Speed
36 and
PVR
and
Time
Shift
Operation
Speed
Check
PVR
File
System
Check
PVR
File
System
Free
Record
Limit
H
Check
PVR
File
System
Select
PVR
File
System”
and
press
OK
to
check
your
USB
device.
Check
PVR
System
Free
Record
Limit
H
Check“Check
PVRFile
File
System
Speed
36and
PVR
shift
Operation
Select
“Check
PVR
File
System”
and
press
Check
PVR
File
System
Free
Record
Limit
666
Speed
OK
to
check
your
USB
device.
Speed
36
Check
PVR
File
System
Free
Record
Limit
66H
H
PVR
and Time
Time
shift
Operation
Select
“Check
PVR
File
System”
and
press
OK
to
check
your USB
USB device.
device.
Speed
Check
PVR
File
System
Select
PVRFree
File System”
and press
OK to check your
Record
Limit
H
Free
Record
Limit
H
Speed
Check“Check
PVR File
System
36and Time shift
PVR36
Operation
Limit
6H
Free Record
Speed
Free
Record
Limit
6H
H
Select
“Check
File
System”
and
press
press
OKto
tocheck
checkyour
yourUSB
USBdevice.
device.
OK
Select
“Check
PVR
File
System”
and
Free
Record
Limit
OK
The PVR File System window is displayed.
With PVR
the
Select
PVR
File
System”
and
OK
Select“Check
“Check
PVR
File
System”
andpress
press
OKto
tocheck
checkyour
yourUSB
USBdevice.
device.
Free
Record
Limit
66
Select
“Check
PVR
File
System”
and
press
OK
to
check
your
USB
device.
Free
Record
Limit
6H
H
OK
4. The PVR File System window is displayed.
With
the
OK
Free
Record
Limit
6
H
OK
OK
Free
Record
Limit
6
H
Free
Record
Limit
6
H
SELECT
DISK
option
highlighted,
press
OK.
4.
The
PVR
File
System
window
is
displayed.
With
the
4.
PVR
System
window
is
Limit
66 HH
OK
4. The
PVRDISK
File
System
window
is displayed.
With
theFree
OKSelect Disk
Free Record
Record
Limit
C:
4. The
The
PVR File
File
System
window
is displayed.
displayed.
SELECT
option
highlighted,
press OK.
Select
“Check
PVR
File
System”
and
press
Select
PVR
File
Select“Check
“Check
PVR
FileSystem”
System”and
andpress
pressOK
OKto
tocheck
checkyour
yourUSB
USBdevice.
device.
Check
PVR File
System
OK
to
check
your
USB
device.
OKSelect Disk
Record
Limit
OK
Select
Disk
C:
4.
The
PVR
File
System
window
is
displayed.
4.
The
PVR
File
System
window
is
displayed.
OK
SelectDisk
Disk
C:
Select
Disk
C:
4.
The
PVR
File
System
window
displayed.
4.
PVR
System
window
is
displayed.
SELECTDISK
DISK
option
highlighted,
pressOK.
OK.
With
the
SELECT
DISK
option
highlighted,
OK
4.The
The
PVR
File
System
window
is
displayed.
Select
Disk
C:
Select
C:
4.
The
PVR
File
System
window
isis
displayed.
SELECT
option
highlighted,
press
With
theFile
SELECT
DISK
option
highlighted,
SelectDisk
Disk
C:
OK
Select
Disk
C:
4.
The
PVR
File
System
window
is
displayed.
Select
C:
Disk
C:
Select
Disk
C:
Select
4.
The
PVR
File
System
window
is
displayed.
With
the
SELECT
DISK
option
highlighted,
With
the
SELECT
DISK
option
highlighted,
OK
Check
PVR
File System
Start
4.press
The
PVR
File
System
window
is
displayed.
Disk
C:
Select
With
the
SELECT
DISK
option
highlighted,
4.
The
PVR
File
System
window
is
displayed.
With
the
Select
Disk
C:
With
the
SELECT
DISK
option
highlighted,
Check
PVR
OK
OK
OK.
4.
The
PVR
File
System
window
is
displayed.
USB
Disk
With
the
SELECT
DISK
option
highlighted,
File
System
Start
4.
The
PVR
File
System
window
is
displayed.
With
the
With
the
SELECT
DISK
option
highlighted,
Select
Disk
C:
OK
press
OK.
PVR
File
System
Start
With
the
SELECT
DISK
option
highlighted,
Check
OK
USB
Disk
Check
PVR
File
System
Start
With
the
SELECT
DISK
option
highlighted,
5. Use
the
/
arrow
button
to
select
the
desired
press
OK.
4. Use
Thethe
PVR
File
System
window
isdisplayed.
displayed.
Withthe
the
4.
The
PVR
File
System
window
is
displayed.
With
the
OK
Check
PVR
Check
PVR
Start
press
OK.
USB
Disk
With
thebutton
SELECT
DISK
option
highlighted,
Check
PVRFile
FileSystem
System
Start
5.4.
/ press
arrow
to
select
theOK.
desired
File
System
Start
4.
The
PVR
File
System
window
is
displayed.
With
the
The
PVR
File
System
window
is
With
Check
PVR
press
OK.
OK.
USB
Disk
With
the
SELECT
DISK
option
highlighted,
Check
PVR
File
System
Start
press
OK.
File
System
Start
SELECT
DISK
option
highlighted,
press
USB
Disk
4.
The
PVR
File
System
window
is
displayed.
With
the
USB
Disk
press
OK.
PVR
File
System
Start
SELECT
DISK
option
highlighted,
press
OK.
4.
The
PVR
File
System
window
is
displayed.
With
the
Check
USB
Disk
press
OK.
USB
Disk
USB
Disk
Check
PVR
File
System
Start
5.
Use
the
/
arrow
button
to
select
the
desired
The
File
System
window
is displayed.
With the
press
OK.
USB
Disk
f no
USB
device
connected,
a notice
will
advise
accordingl
Check
PVR
File System you
SELECT
DISK
option
highlighted,
press
OK.
5.4. toUse
the
/ for
arrow
button
to
select
the
desired
press
OK.
SELECT
DISK
option
highlighted,
press
OK.
USB
Disk
USB
Disk
disk
use
for
PVR.
This
will
only
apply
to
storage
USB
Disk
disk
toPVR
use
PVR.
This
willis
only
apply
toOK.
storage
SELECT
DISK
option
highlighted,
press
OK.
press
OK.
SELECT
DISK
option
highlighted,
press
USB
Disk
no
USB
device
is
connected,
notice
will
advise
youStart
accordingl
USB
Disk
USB
Disk
USB
USBDisk
Disk
SELECT
DISK
option
highlighted,
press
OK.
USB
Disk
no
USB
device
is
connected,
notice
will
advise
you
accordingl
SELECT
DISK
option
highlighted,
press
OK.
USB
Disk
5.
Use
the
arrow
buttons
select
the
disk
toUSB
use
for
PVR.
This
will
only
apply
to
storage
Format
fffffwhich
USB
device
is
connected,
aaaaaaanotice
will
advise
you
accordingl
SELECT
DISK
option
highlighted,
press
OK.
USB
Disk
fffno
no
USB
device
is
connected,
notice
will
advise
you
accordingl
5.for
Use
the
arrow
buttons
to
select
the
USB
Disk
Format
disk
to
use
PVR.
This
will
only
apply
to
storage
USB
Disk
no
USB
device
is
connected,
notice
will
advise
you
accordingl
devices
have
been
partitioned
into
return
devices
which
have
been
partitioned
into
return
Disk
no
USB
device
is
connected,
notice
will
advise
you
accordingl
USB
Disk
5.
Use
the
arrow
buttons
to
select
the
Format
5.
Use
the
arrow
buttons
to
select
the
no
USB
device
is
connected,
notice
will
advise
you
accordingl
Format
no
USB
device
is
connected,
a
notice
will
advise
you
accordingl
USB
Disk
5.
Use
the
arrow
buttons
to
select
the
5.
Use
the
arrow
buttons
to
select
the
desired
disk
to
use
for
PVR.
This
will
only
Format
Format
5.
Use
the
arrow
buttons
to
select
the
5.
Use
the
/
arrow
button
to
select
the
desired
f
no
USB
device
is
connected,
a
notice
will
advise
you
accordingl
Format
Format
f
no
USB
device
is
connected,
a
notice
will
advise
you
accordingl
USB
Disk
devices
which
have
been
partitioned
into
return
5.
Use
the
arrow
buttons
to
select
the
desired
disk
to
use
for
PVR.
This
will
only
Format
5.
Use
the
/
arrow
button
to
select
the
desired
5.
Use
the
arrow
buttons
to
select
the
Format
devices
which
have
been
partitioned
into
return
Time
Shift
Size
Format
to
PVR
FILE
SYSTEM
window.
desired
disk
to
use
for
PVR.
This
will
only
5.
Use
the
arrow
buttons
to
select
the
Format
to5.5.
PVRUse
FILE
SYSTEM
window.
Timewill
Shift Size
desired
disk
to
use
for
PVR.
This
will
only
5.
Use
the
/
arrow
button
to
select
the
desired
5.apply
Use
the
arrow
buttons
tohave
select
thea
Use
the
/
arrow
button
to
select
the
desired
f
no
USB
device
is
connected,
a
notice
will
advise
you
accordingl
Format
Format
desired
disk
to
use
for
PVR.
This
will
only
desired
disk
to
use
for
PVR.
This
will
only
5.
Use
the
/
arrow
button
to
select
the
desired
5.
Use
the
arrow
buttons
to
select
the
the
/
arrow
button
to
select
the
desired
to
storage
devices
which
been
desired
disk
to
use
for
PVR.
This
will
only
f
no
USB
device
is
connected,
notice
advise
you
accordingl
Time
Shift
Size
Format
Format
Time
Shift
Size
disk
to
use
for
PVR.
This
will
only
apply
to
storage
Format
desired
to
use
for
PVR.
This
will
only
5.
Use
the
/
arrow
button
to
select
the
desired
apply
todisk
storage
devices
which
have
been
to
PVR
FILE
SYSTEM
window.
desired
disk
to
use
for
PVR.
This
will
only
Time
Shift
disk
to
use
for
PVR.
This
will
only
apply
to
storage
Time
Shift
Size
5.
Use
the
/
arrow
button
to
select
the
desired
Format
f
no
USB
device
is
connected,
a
notice
will
advise
you
accordingl
Time
Shift
Size
Format
Size
to
PVR
FILE
SYSTEM
window.
desired
disk
to
use
for
PVR.
This
will
only
Time
Shift
5. disk
Use
the
/USB
arrow
button
to
select
the
desired
apply
to
storage
devices
which
have
been
apply
to
storage
devices
which
have
been
fuse
no
device
is
connected,
a notice
will
advise
you select
accordingl
desired
disk
to
use
for
PVR.
This
willbeen
only and
Format
ShiftSize
Size
ff your
is
recognised
working,
you
can
FF
TimeSpeed
disk
toFormat
use
forUSB
PVR.
This
will
only
apply
to
storage
Format
disk
to
use
for
PVR.
This
will
only
apply
to
storage
apply
to
storage
devices
which
have
been
apply
to
storage
devices
which
have
desired
disk
to
use
for
PVR.
This
will
only
partitioned
into
multiple
disks.
Press
OK
Time
Shift
Size
Speed
apply
todevice
storage
devices
which
have
been
disk
to
use
for
PVR.
This
will
only
apply
to
storage
Format
to
use
for
PVR.
This
will
only
apply
to
storage
your
USB
device
is
recognised
and
working,
you
can
select
apply
to
storage
devices
which
have
been
Time
Shift
Size
partitioned
into
multiple
disks.
Press
OK
devices
which
have
been
partitioned
into
disk
to
for
PVR.
This
will
only
apply
to
storage
apply
to
storage
devices
which
have
been
Speed
Time
Shift
Size
f
your
USB
device
is
recognised
and
working,
you
can
select
FFF
Speed
devices
which
have
been
partitioned
into
disk
to
use
for
PVR.
This
will
only
apply
to
storage
apply
to
storage
devices
which
have
been
Format
partitioned
into
multiple
disks.
Press
OK
partitioned
into
multiple
disks.
Press
OK
f
your
USB
device
is
recognised
and
working,
you
can
select
F
Speed
apply
to
storage
devices
which
have
been
Speed
disk
to
use
for
PVR.
This
will
only
apply
to
storage
f
your
USB
device
is
recognised
and
working,
you
can
select
Speed
Format
partitioned
into
multiple
disks.
Press
OK
devices
which
have
been
partitioned
into
partitioned
into
multiple
disks.
Press
OK
devices
which
have
been
partitioned
into
Speed
apply
to
storage
devices
which
have
been
partitioned
into
multiple
disks.
Press
OK
f
your
USB
device
is
recognised
and
working,
you
can
select
F
Speed
6.
Press
the
arrow
to
select“CHECK
PVR
FILE
f
your
USB
device
is
recognised
and
working,
you
can
select
partitioned
into
multiple
disks.
Press
OK
devices
which
have
been
partitioned
into
devices
which
have
been
partitioned
into
Free
Record
Limit
6
Hr.
partitioned
into
multiple
disks.
Press
OK
Format
Speed
f
your
USB
device
is
recognised
and
working,
you
can
select
Press
OK
to
start
Format
(File
System
Size).
6. Press
the
arrow
to
select
“CHECK
PVR
FILE
devices
which
have
been
partitioned
into
Free
Record
f
your
USB
device
is
recognised
and
working,
you
select
F
f
your
USB
device
is
recognised
and
working,
you
can
select
F
Speed
Format
Limit
6
Hr.
partitioned
into
multiple
disks.
Press
OK
devices
which
have
been
partitioned
into
can
partitioned
into
multiple
disks.
Press
OK
f
your
USB
device
is
recognised
and
working,
you
can
select
Press
OK
to
start
Format
(File
System
Size).
Speed
6. Press
Press
thef on
arrow
tostart
select“CHECK
PVR
FILE
Record Limit
Limit
6 Hr.
Hr.
devices
which
have
been
partitioned
into
Free
Free
Record
partitioned
into
multiple
disks.
PressSystem
OK
FILE
SYSTEM
window.
6.
the
arrow
to
select“CHECK
FILE
Press
OK
to
Format
(File
System
Size).
Free
Record
Limit
Hr.
your
USB
device
isPVR
recognised
andFree
working,
you can
can
select FFF
Record
Limit
66666Hr.
FILE
SYSTEM
window.
SYSTEM”
press“OK”
button.
When
the
media
Free
Record
Limit you
Hr.
Press
OK
to
start
Format
(File
Size).
Free
Record
fto
your
USB
device
is
recognised
and
working,
select
Press
OK
to
start
Format
(File
System
Size).
return
PVR
FILE
SYSTEM
window.
Record
Limit
Hr.
Limit
66 Hr.
OK
Free
SYSTEM”
on Press
press
“OK”
button.
When
the
media
FILE
SYSTEM
window.
FILE
SYSTEM
window.
Press
OK
to
start
Format
(File
System
Size).
return
to
PVR
FILE
SYSTEM
window.
Press
OK
to
start
Format
(File
System
Size).
Record
Limit
Hr.
OK deleted.
f
your
USB
device
is
recognised
and
working,
you
can
select
F
Free
FILE
SYSTEM
window.
SYSTEM”
on
press“OK”
button.
When
the
media
FILE
SYSTEM
window.
Free
Record
Limit
6
Hr.
OK
to
start
Format
(File
System
Size).
Press
OK
to
start
Format
(File
System
Size).
NOTE:
If
you
select
Format,
all
data
will
be
FILE
SYSTEM
window.
f
your
USB
device
is
recognised
and
working,
you
can
select
F
Press
OK
to
start
Format
(File
System
Size).
OK deleted.
return
to
PVR
FILE
SYSTEM
window.
FILE
SYSTEM
window.
SYSTEM”
on
press“OK”
button.
When
the(File
media
return
to
PVR
FILE
SYSTEM
window.
Free
Record
Limit
6 Hr.
OK
has
been
checked
select
”FORMAT”and
press“OK”
FILE
SYSTEM
window.
Press
OK
to
start
Format
Size).
NOTE:
you
select
Format,
allSystem
data
will
be
return
to
PVR
FILE
SYSTEM
window.
return
to
PVR
FILE
SYSTEM
window.
OK
OK
FILE
SYSTEM
window.
OK deleted.
return
to
PVR
FILE
SYSTEM
window.
Press
OK
to
start
Format
(File
System
Size).
NOTE:
IfIfIf
you
select
Format,
all
data
will
be
FILE
SYSTEM
window.
OK
has been
checked
select
”FORMAT”
and press
“OK”
OK
return
tochecked
PVR
FILE
SYSTEM
window.
Press
OK
to
start
Format
(File
System
Size).
NOTE:
If
you
select
Format,
all
data
will
be
FILE
SYSTEM
window.
has
been
checked
select
”FORMAT”and
press“OK”
NOTE:
you
select
Format,
all
data
will
be
deleted.
OK
return
to
PVR
FILE
SYSTEM
window.
has
been
select
”FORMAT”and
press“OK”
OKdeleted.
NOTE:
If
you
select
Format,
all
data
will
be
deleted.
Press
OK
to
start
Format
(File
System
Size).
NOTE:
If
you
select
Format,
all
data
will
be
deleted.
USB
Disk
NOTE:
If
you
select
Format,
all
data
will
be
deleted.
OK
Press
OK
to
start
Format
(File
System
Size).
USB
device
is
recommended
format
in
FAT32
system
type.
NOTE:
If
you
select
Format,
all
data
will
be
deleted.
USB
Disk
NOTE:
If
you
select
Format,
all
data
will
be
deleted.
USB
device
isUSB
recommended
format
in
FAT32
system type.
type.
NOTE:
If
you
select
Format,
allisisall
data
be
deleted.
Press
the
arrow
to
select
“CHECK
PVR
FILE
to6.
confirm.
USB
Disk
Disk
NOTE:
Ifdevice
you
select
Format,
all
datawill
will
be
deleted.
6.
Press
the
arrow
to
select
“CHECK
PVR
FILE
USB
device
is
recommended
format
in
FAT32
system
type.
Disk
IfUSB
no
USB
device
connected,
aa notice
will
advise
you
accordingly.
Disk
USB
Disk
If
you
select
Format,
data
will
be
deleted.
USB
is
recommended
format
in
FAT32
system
IfUSB
no
USB
device
connected,
notice
will
USB
Disk
6. Press
PressNOTE:
the
arrow
toselect
select
“CHECK
PVR
FILE
USB
device
is
recommended
format
in
FAT32
system
type.
6.
Press
the
arrow
to
select
“CHECK
PVR
FILE
advise
you
accordingly.
6.
Press
the
arrow
to
select
“CHECK
PVR
USB
Disk
NOTE:
If
you
select
Format,
all
data
will
be
deleted.
USB
device
is
recommended
format
in
FAT32
system
type.
6.
Press
the
arrow
to
select
“CHECK
PVR
FILE
will
advise
you
accordingly.
6.
Press
the
arrow
to
select
“CHECK
PVR
6.
the
arrow
to
“CHECK
PVR
FILE
USB
device
is
recommended
format
in
FAT32
system
type.
If
no
USB
device
is
connected,
a
notice
USB
device
is
recommended
format
in
FAT32
system
USB
Disk
If
no
USB
device
is
connected,
a
notice
will
advise
you
accordingly.
SYSTEM”
on
press
“OK”
button.
When
the
media
USB
Disk
NOTE:
If
you
select
Format,
all
data
will
be
deleted.
6.
Press
the
arrow
to
select
“CHECK
PVR
FILE
USB
device
is
recommended
format
in
FAT32
system
type.
type.
If
no
USB
device
is
connected,
notice
will
IfIf
no
USB
device
is
connected,
aaaaanotice
will
advise
you
accordingly.
USB
device
is
recommended
format
in
FAT32
system
type.
SYSTEM”
on
press
“OK”
button.
When
the
media
6. SYSTEM”
Press
the
arrow
to
select
“CHECK
PVR
FILE
If
no
USB
device
is
connected,
notice
will
advise
you
accordingly.
6.
Press
the
arrow
to
select
“CHECK
PVR
USB
Disk
advise
you
accordingly.
6.
Press
the
arrow
to
select
“CHECK
PVR
Format
no
USB
device
is
connected,
notice
will
USB
device
is
recommended
format
in
FAT32
system
type.
File
System
Size
6.
Press
the
arrow
to
select
“CHECK
PVR
FILE
If
no
USB
device
is
connected,
notice
will
advise
you
accordingly.
6.
Press
the
arrow
to
select
“CHECK
PVR
advise
you
accordingly.
6.
Press
the
arrow
to
select
“CHECK
PVR
FILE
SYSTEM”
on
press
“OK”
button.When
6.
Press
the
arrow
toIfFormat
select
“CHECK
PVR
USB
device
is
recommended
format
in
FAT32
system
type.
SYSTEM”
on
press
“OK”
button.
When
the
media
on
press
“OK”
button.
When
the
media
File
will
advise
you
accordingly.
6.
Press
the
arrow
to
select
“CHECK
PVR
FILE
SYSTEM”
on
press
“OK”
button.When
7. Use
the
/
System
Size
no
USB
device
is
connected,
a
notice
USB
device
is
recommended
format
in
FAT32
system
type.
SYSTEM”
on
press
“OK”
button.
When
the
media
SYSTEM”
on
press
“OK”
button.
When
the
media
Format
If
no
USB
device
is
connected,
a
notice
will
advise
you
accordingly.
6.
Press
the
arrow
to
select
“CHECK
PVR
Format
File
System
Sizeselect
has
been
checked
select
”FORMAT”
and
press
SYSTEM”
on
press
“OK”
button.
When
the
media
File
System
Size
If
no
USB
device
is
connected,
a
notice
will
advise
you
accordingly.
6.
Press
the
arrow
to
select
“CHECK
PVR
FILE
SYSTEM”
on
press
“OK”
button.When
FILE
SYSTEM”
on
press
“OK”
button.When
USB
device
is
recommended
format
in
FAT32
system
type.
Format
If
your
USB
device
is
recognised
and
working,
you
can
Format.
6.
Press
the
arrow
to
select
“CHECK
PVR
Format
has
been
checked
select
”FORMAT”
and
press
SYSTEM”
on
press
“OK”
button.
When
the
media
Format
File
System
Size
File
System
Size
File
System
Size
FILE
SYSTEM”
on
press
“OK”
button.When
If
your
USB
device
is
recognised
and
working,
7. the
Use
the
/
FILE
SYSTEM”
on
press
“OK”
button.When
USB
device
is
recommended
format
in
FAT32
system
type.
Format
6.
Press
the
arrow
to
select
“CHECK
PVR
the
media
has
been
checked
select
FILE
SYSTEM”
on
press
“OK”
button.When
SYSTEM”
on
press
“OK”
button.
When
the
media
7. Use
/
arrow
buttons
to
select
the
file
you
can
select
Format.
File
Format
FILE
SYSTEM”
on
press
“OK”
button.When
has
been
checked
select
”FORMAT”
and
press
File
System
Size
7.
Use
the
/
File
System
Size
System
Size
has
been
checked
select
”FORMAT”
and
press
the
media
has
been
checked
select
FILE
SYSTEM”
on
press
“OK”
button.When
If
your
USB
device
is
recognised
and
working,
you
can
select
Format.
Format
system
type.
Themedia
options
are
FAT32
orOK
Hi
Speed
IfIf
your
USB
device
isisrecognised
recognised
and
working,
you
can
select
Format.
File
System
Size
File
System
Size
has
been
checked
select
”FORMAT”
and
press
has
been
checked
select
”FORMAT”
and
press
Format
FILE
SYSTEM”
on
press
“OK”
button.When
File
System
Size
your
USB
device
recognised
and
working,
Press
to
start
Format
(File
System
Size).
If
your
USB
device
is
and
working,
you
select
Format.
the
media
has
been
checked
select
the
has
been
checked
select
has
been
checked
select
”FORMAT”
and
press
FILE
SYSTEM”
on
press
“OK”
button.When
your
USB
device
recognised
and
working,
youcan
can
select
Format.
Format
you
can
select
Format.
Press
OK
to
start
Format
(File
System
Size).
File
System
Size
File
System
Size
has
been
checked
select
”FORMAT”
and
press
If
USB
device
isis
and
working,
File
System
Size
the
media
has
been
checked
select
the
media
has
been
checked
select
FILE
SYSTEM”
on
press
“OK”
button.When
working,
you
can
select
Format.
you
can
select
Format.
the
media
hasFAT32
been
checked
select
PVR
File
System
Type
FAT32
system
type.
The
options
are
FAT32
orOK
Hi
Speed
IfIfIfyour
your
USB
device
isrecognised
recognised
and
File
System
Size
has
been
checked
select
”FORMAT”
and
press
File
System
Size
the
media
has
been
checked
select
Press
OK
to
start
Format
(File
System
Size).
working,
you
select
Format.
PVR
File
System
system
type.
The
options
are
or
Hi
Speed
system
type.
The
options
are
FAT32
or
Hi
Speed
If
your
USB
device
is
recognised
and
Press
to
start
Format
(File
System
Size).
Type
FAT32
the
media
has
been
checked
select
File
System
Size
your
USB
device
recognised
and
working,
youcan
can
select
Format.
File
System.
Press
OK
to
start
Format
(File
System
Size).
File
System
Size
NOTE:
IfIf
you
select
Format,
all
data
will
be
deleted.
Press
OK
to
Format
(File
System
Size).
PVR
File
System
Type
FAT32
the
has
been
checked
select
Press
OK
tostart
start
Format
(File
System
Size).
IfPress
your
USB
device
isis
recognised
and
working,
you
can
select
Format.
themedia
media
has
been
checked
select
PVR
File
System
Type
FAT32
NOTE:
you
select
Format,
all
data
will
be
Press
OK
to
start
Format
(File
System
Size).
File
System
Size
deleted.
Size).
PVR
File
System
the
media
has
been
checked
select
PVR
File
System
Type
FAT32
OK
to
start
Format
(File
System
PVR
File
System
Type
FAT32
Type
FAT32
will
bedeleted.
deleted.
Size).
FileSystem.
System.
PVR
File
System
Type
PVR
File
System
NOTE:
IfIfyou
you
select
Format,
all
data
Press
to
start
Format
(File
System
NOTE:
IfIf
you
select
Format,
all
data
will
be
deleted.
File
System
Type
FAT32
Type
FAT32
PressOK
OK
todevice
start
Format
(File
System
Size).
PVR
PVR
File
System
Type system
FAT32
File
File System.
is
recommended
format
in
FAT32
type.
NOTE:
you
select
Format,
all
data
will
be
deleted.
NOTE:
IfIfUSB
select
Format,
all
data
will
be
PVR
File
System
Type
FAT32
NOTE:
you
select
Format,
all
data
will
bedeleted.
deleted.
Press
OK
to
start
Format
(File
System
Size).
Size
All
USB
device
is
recommended
format
PVR
File
System
Type
FAT32
NOTE:
you
select
Format,
all
data
will
be
in
FAT32
system
type.
PVR
File
System
will
be
deleted.
PVR
File
System
Type
FAT32
PVR
File
System
Type
FAT32
NOTE:
If
you
select
Format,
all
data
Size
All
Type
FAT32
format
inSize
FAT32
systemFAT32
type.
will
be
deleted.
PVR
File
System
Type system
FAT32
PVR
File
System
Type
7.
Use
the
// the
USB
device
is
recommended
File
System
Size
All
device
is
recommended
format
in
FAT32
system
type.
NOTE:
IfUSB
select
Format,
all
data
PVR
NOTE:USB
Ifyou
you
select
Format,
all
data
will
be
deleted.
PVR
File
System
All
PVR
File
System
Type
7.
Use
the
USB
device
recommended
format
in
FAT32
system
type.
device
is
recommended
format
in
FAT32
type.
USB
device
is
recommended
format
in
FAT32
systemFAT32
type.
NOTE:
If
you
select
Format,
all
data
will
be
deleted.
PVR
File
System
PVR
File
System
Type
FAT32
PVR
File
System
Size
All
7.
arrow
buttons
to
select
the
PVR
File
System
Size
All
File
System
Size system
Size
All
PVR
File
System
Size
device
isis
recommended
format
format
in
FAT32
system
type.
FAT32
type.
PVR
File
System
7. /Use
Use
the
arrow
buttons
to
select
the
Type
FAT32
7. The
Usedisk
thewill
7.
Use
the
/Use
USB
device
is
recommended
Filein
System
Size system
PVR
File
System
Size
All
Size
PVR
File
System
Size
All
File
System
Size
8.7.
format.
Time
will
varyUSB
depending
format
in
FAT32
type.
7.
Use
the
///now
Use
the
USB
device
is
File
System
Size
All
USB
device
recommended
format
in
FAT32
systemAll
type.
File
System
Size
PVR
7.
the
arrow
buttons
to
select
the
system
type.
The
options
are
FAT32
or
Hi
Speed
SD
50
Mins
7.
the
arrow
buttons
to
select
the
Filein
System
Size system
PVR
File
System
Size
All
7.
Use
the
/Use
File
System
Size
PVR
File
System
Size
All
PVR
File
System
Size
USB
device
isisrecommended
recommended
format
FAT32
type.
system
type.
The
options
are
FAT32
or
Hi
Speed
7.
Use
the
arrow
buttons
to
select
the
7.
Use
the
7.
Use
the
arrow
buttons
to
select
the
File
System
Size
PVR
File
System
Size
All
7.
Use
the
arrow
buttons
to
select
the
File
System
Size
SD
50
Mins
PVR
File
System
Size
All
PVR
File
System
Size
File
System
Size
File
System
Size
8.
The
disk
will
now
format.
Time
will
vary
depending
7.
Use
the
arrow
buttons
to
select
the
7.
Use
the
/
File
System
Size
SD
50
Mins
PVR
File
System
Type
PVR
File
System
Size
All
File
System
Size
File
System
Size
system
type.
The
options
are
FAT32
or
Hi
Speed
7.
Use
the
arrow
buttons
to
select
the
8. disk
The
disk
will
now
format.
Time
will
vary
depending
system
type.
The
options
are
FAT32
or
Hi
Speed
SD
50
Mins
File
System
Size FAT32
PVR
File
System
Size
All
PVR
File
System
Type
FAT32
on
the
disk
size
and
contents.
When
format
is
File
System
Size
PVR
File
System
Type
FAT32
7.
Use
the
arrow
buttons
to
select
the
system
type.
The
options
are
FAT32
or
Hi
Speed
SD
50
Mins
8. The
will
now
format.
Time
will
vary
depending
system
type.
The
options
are
FAT32
or
Hi
Speed
SD
50
Mins
SD
50
Mins
File
System
Size
SD
50
Mins
7.or
Use
theoptions
arrow
buttons
toHi
select
the
PVR File
System
Size
All
File
System
Size FAT32
File
System.
PVR
File
System
Type
FAT32
system
type.
The
are
FAT32
or
Speed
SD
50
Mins
PVR File
File
System
Type
FAT32
7.
Use
the
arrow
buttons
to
select
the
SD
50
Mins
PVR
System
Type
SD
50
Mins
Hi
Speed
File
System.
File
System
Size
File
System.
system
type.
The
options
are
FAT32
or
Hi
Speed
PVR
File
System
Size
All
PVR
File
System
Type
FAT32
SD
50
or
Hi
Speed
File
System.
PVR
System
Type
on
the
disk
size
and
contents.
When
format
PVRFile
File
System
Type
FAT32
PVR
File
System
Type
FAT32
system
type.
The
options
are
FAT32
orwill
Hiisisbe
Speed
SD
50
MinsFAT32
SD
50
Mins
HD
14
Mins
SD
50
Mins
PVR
File
System
Size
All
PVR
System
Type
FAT32
File
System.
the
disk
size
and
contents.
When
format
File
System.
PVR
File
System
Size
All
PVR
File
System
Type
FAT32
orHi
Hi
Speed
FileWhen
System.
PVR
File
System
Type
FAT32
SD
50
Mins
14
Mins
SD
50
Mins
PVRFile
FileHD
System
Type
FAT32
complete
the
PVR
FILE
SYSTEM
window
SD
50
or
Hi
Speed
File
System.
File
System.
PVR
File
System
Size
All
File
System.
Type
FAT32
SD
50
Mins
on theon
disk
size
and
contents.
format
is
PVR
File
System
Size
All
PVR
File
System
Size
All
Type
FAT32
or
Hi
Speed
File
System.
HD
14
Mins
or
Speed
File
System.
PVR
File
System
Type
FAT32
File
System.
or
Hi
Speed
File
System.
SD
50
Mins
HD
14
Mins
PVR
File
System
Size
All
SD14
50
Mins
PVR
System
Size
All
File System.
System.
or
Hi
Speed
File
System.
PVRFile
File
System
Size
All
HD
14
Mins
PVR
File
System
Size
All
Type
SD
50
HD
Mins
complete
the
PVR
FILESYSTEM
SYSTEM
windowwill
willbe
be
SD14
50
Mins
or
Hi
Speed
File
System.
HD
14
Mins
PVR
System
Size
All
HD
Mins
File
HD
14
Mins FAT32
PVR
File
System
Size
All
SD
50
Mins
PVR
File
System
Size
All
PVRFile
File
System
Size
All
complete
the
PVR
FILE
window
or
Hi
File
HD
14
Mins
HD
14
Mins
SD
50
Mins
orFILE
HiSpeed
Speed
FileSystem.
System.
PVR
System
Size
displayed
again.
SD
50
Mins
PVR
File
System
Size
All
SD
50
Mins
HD
14
Mins
HD
14
Mins All
PVRFile
File
System
Size
All
HD
14
Mins
or
Hi
Speed
File
System.
complete
the
PVR
SYSTEM
window
will
be
SD
50
Mins
HD
14
Mins
HD
14
Mins
SD
Mins
SD50
50
Mins
PVR FileHD
System
Size
All
HD
14
Mins
SD
50
Mins
HD
14
Mins
HD
14
Mins
SD
50
Mins
Mins
8.
The
disk
will
now
format.
Time
will
vary
SD
50
Mins
HD
14
Mins
HD
14
Mins
SD
50
Mins
displayed
again.
SD14
50
Mins
8.
The
disk
will
now
format.
Time
will
vary
HD
14
Mins
HD
14
Mins
SD
50
Mins
displayed
again.
HD
14
Mins
SD
50
Mins
HD
14
8.
The
disk
will
now
format.
Time
will
vary
SD
50
Mins
HD
14
Mins
8. The
The
disk
will
now
format.
Time
will
vary
HD
14
8.
The
disk
will
now
format.
Time
will
vary
HD
8.
The
disk
will
now
format.
Time
will
vary
HD14
14Mins
Mins
SD
50
Mins
HD
14
8.
The
disk
will
now
format.
Time
will
vary
HD
14
Mins
displayed
again.
8.
disk
will
now
format.
Time
will
vary
HD
14
Mins
HD
depending
on
the
disk
size
and
contents.
HD14
14Mins
Mins
8.
The
disk
will
now
format.
Time
will
vary
8.
The
disk
will
now
format.
Time
will
vary
8.8. The
will
now
format.
Time
will
vary
HD
depending
on
the
disk
size
and
contents.
Thedisk
disk8.
will
now
format.
Time
will
vary
HD
14
Mins
8.
The
disk
will
now
format.
Time
will
vary
The
disk
will
now
format.
Time
will
HD14
14Mins
Mins
depending
on
the
disk
size
and
contents.
8.
The
disk
will
now
format.
Time
willvary
vary
The
disk
will
now
format.
Time
will
vary
8.
The
disk
will
now
format.
Time
will
vary
HD 14 Mins
depending
on
the
disk
size
and
contents.
depending
on
the
disk
size
and
contents.
depending
on
the
disk
size
and
contents.
8.
The
disk
will
now
format.
Time
will
vary
9.8. Press
EXIT
to
close
the
window
and
return
to TV
depending
on
the
disk
size
and
contents.
depending
on
the
disk
size
and
contents.
8.
The
disk
will
now
format.
Time
will
vary
depending
on
the
disk
size
and
contents.
depending
on
the
disk
size
and
contents.
8.depending
The
disk
will
now
format.
Time
will
vary
When
format
is
complete
the
PVR
FILE
SYSTEM
depending
on
the
disk
size
and
contents.
depending
on
the
disk
size
and
contents.
on
the
disk
size
and
contents.
8.
The
disk
will
now
format.
Time
will
vary
When
format
is
complete
the
PVR
FILE
SYSTEM
When
format
is
complete
the
PVR
FILE
depending
on
the
disk
size
and
contents.
depending
on
the
disk
size
and
contents.
9.
Press
EXIT
to
close
the
window
and
return
to
TV
depending
on
the
disk
size
and
contents.
When
format
is
complete
the
PVR
FILE
depending
on
the
disk
size
and
contents.
depending
on
the
disk
size
and
contents.
When
format
is
complete
the
PVR
FILE
SYSTEM
9. Press
EXIT
to
close
the
window
and
return
to
TV
When
format
is
complete
the
PVR
FILE
SYSTEM
viewing.
depending
on
the
disk
size
and
contents.
When
format
is
complete
the
PVR
FILE
When
format
is
complete
the
PVR
FILE
SYSTEM
When
format
is
complete
the
PVR
FILE
depending
on
the
disk
size
and
contents.
When
format
is
complete
the
PVR
FILE
SYSTEM
window
will
be
displayed
again.
When
format
isisthe
complete
the
PVR
FILE
When
is
complete
the
PVR
FILE
SYSTEM
When
format
complete
the
PVR
FILE
depending
onis
disk
size
and
contents.
SYSTEM
window
will
be
displayed
again.
When
format
complete
the
PVR
FILE
window
will
be
displayed
again.
When
format
complete
the
PVR
FILE
SYSTEM
When
format
is
complete
the
PVR
FILE
9. Press viewing.
EXIT
to format
close
the
window
and
return
to
TV
SYSTEM
window
will
be
displayed
again.
viewing.
When
format
complete
the
PVR
FILE
When
format
isisdisplayed
complete
the
PVR
FILE
SYSTEM
Press
the
keys
to
select
PVR
File
System
Type,
then
press
OK
to format
When
format
isis
complete
the
PVR
FILE
window
will
be
displayed
again.
SYSTEM
window
will
be
displayed
again.
window
will
be
displayed
again.
SYSTEM
window
will
be
displayed
again.
When
format
complete
the
PVR
FILE
Press
the
keys
to
select
PVR
File
System
window
will
be
displayed
again.
window
be
again.
Type,
then
press
OK
SYSTEM
window
will
be
displayed
again.
SYSTEM
window
will
be
again.
When
format
isis complete
the
PVR
FILE
SYSTEM
window
will
bedisplayed
displayed
again.
window
will
be
displayed
again.
Press
thedevice.
keys
to
selectDisk
PVR screen
File System
System
Type,
then press
press OK
OK to
to format
format
SYSTEM
window
will
be
displayed
again.
Press
the
keys
to
select
PVR
File
Type,
then
windowwill
will
be
displayed
again.
SYSTEM
window
will
be
displayed
again.
viewing.
Press
the
keys
to
select
PVR
File
System
Type,
then
press
OK
to
format
the
USB
The
Format
below
appears
Press
the
keys
select
Type,
then
window
will
be
displayed
again.
Press
the
keys
to
selectPVR
PVRFile
FileSystem
System
Type,
thenpress
pressOK
OKto
toformat
format
SYSTEM
window
will
be
displayed
again.
the
USB
device.
Theto
Format
Disk
screen
below
Press
the
keys
to
select
PVR
File
System
SYSTEM window
window
will
be
displayed
again.
appears
System
Type,
then
press
OK
to
format
Type,
then
press
OK
to
format
Press
the
keys
to
select
PVR
File
Press
the
keys
to
select
PVR
File
System
Type,
then
press
OK
SYSTEM
will
be
displayed
again.
below
appears
System
Type,
then
press
OK
to
format
the
USB
device.
The
Format
Disk
screen
The
disk
willPress
now
ready
tothe
use
forkeys
recording.
Press
the
keys
to
select
PVR
File
the
USB
device.
The
Format
Disk
screen
below
appears
Press
the
keys
to
select
PVR
File
System
Type,
then
press
OK
to
format
Press
the
keys
to
select
PVR
File
System
Type,
then
press
OK
the
to
select
PVR
File
System
Type,
then
OK
the
USB
device.
The
Format
Disk
screen
below
appears
9.
Press
EXIT
to
close
window
and
return
to
the
USB
device.
The
Format
Disk
screen
below
appears
the
USB
device.
Theto
Format
Disk
screen
below
appears
Press
the
keys
select
PVR
File
System
Type,
then
press OK
to format
press
9.
Press
EXIT
to
close
the
window
and
return
to
the
USB
device.
The
Format
Disk
screen
below
Press
the
keys
to
select
PVR
File
System
Type,
then
press
OK
below
appears
appears
the
USB
device.
The
Format
Disk
screen
The
disk
will
now
ready
to
use
for
recording.
Press
the
keys
to
select
PVR
File
System
Type,
then
press
OK
below
appears
Press
the
keys
to
select
PVR
File
System
Type,
then
press
OK
9.
Press
EXIT
to
close
the
window
and
return
press
Press
the
keys
to
select
PVR
File
System
Type,
then
9.
Press
EXIT
to
close
the
window
and
return
to
the
USB
device.
The
Format
Disk
screen
The
disk
will
now
ready
to
use
for
recording.
9.
Press
EXIT
to
close
the
window
and
return
to
the
USB
device.
The
Format
Disk
screen
below
appears
Press
the
keys
to
select
PVR
File
System
Type,
then
press
OK
9.
Press
EXIT
to
close
the
window
and
return
press
OK
Press
the
keys
to
select
PVR
File
System
Type,
then
OK
9.
Press
EXIT
to
close
the
window
and
return
to
Press
the
keys
to
select
PVR
File
System
Type,
OK
9.
Press
EXIT
to
close
the
window
and
to
the
USBreturn
device.
The
Format
Disk
screen
below
appears
TV
viewing.
9.
Press
EXIT
to
close
the
window
and
return
to
Press
the
keys
to
select
PVR
File
System
Type,
then
press
OK
the
USB
device.
The
Format
Disk
screen
below
appears
Press
the
keys
to
select
PVR
File
System
Type,
then
press
OK
9.
Press
EXIT
to
close
the
window
and
return
9.
Press
EXIT
to
close
the
window
and
return
Press
the
keys
to
select
PVR
File
System
Type,
then
TV
viewing.
9.
Press
EXIT
to
close
the
window
and
return
to
the
USB
device.
The
Format
Disk
screen
below
appears
Press
the
keys
to
select
PVR
File
System
Type,
then
press
OK
the
USB
device.
The
Format
Disk
screen
below
appears
9.
Press
EXIT
to
close
the
window
and
return
9.
Press
EXIT
to
close
the
window
and
return
Press
the
keys
to
select
PVR
File
System
Type,
then
OK
9.
Press
EXIT
to
close
the
window
and
return
to
TV
viewing.
Press
EXIT
to
close
the
window
and
return
to
The disk9.willTV
now
ready
to
use
for
recording.
TV
viewing.
9.
Press
EXIT
to
close
the
window
and
return
TV
viewing.
to
TV
viewing.
the
USB
device.
The
Format
Disk
screen
below
appears
9.
Press
EXIT
to
close
the
window
and
return
TV
viewing.
viewing.
the
USB
device.
The
Format
Disk
screen
below
appears
to
TV
viewing.
the
USB
device.
The
Format
Disk
screen
below
appears
the
USB
device.
The
Format
Disk
screen
below
appears
9.
Press
EXIT
to
close
the
window
and
return
TV
viewing.
9.to
Press
EXIT
to close
close
the
window
and
return
to
TV
viewing.
the
USB
device.
The
Format
Disk
screen
below
appears
the
USB
device.
The
Format
Disk
screen
below
appears
TV
viewing.
to
TV
viewing.
9.
Press
EXIT
to
the
window
and
return
TV
viewing.
the
USB
device.
The
Format
Disk
screen
below
appears
to
TV
viewing.
TV viewing.
4. The PVR File System window is displayed.Free
C:
to
TV
viewing.
the
USB
device.
The
Format
Disk
screen
the
USB
device.
The
Format
Disk
screenbelow
belowappears
appears
thethe
USB
device.
The
Format
Disk
screen
below
appears
to
TV
viewing.
to
TV
viewing.
USB
device.
The
Format
Disk
screen
below
appears
the
USB
device.
The
Format
Disk
screen
below
appears
to
TV
viewing.
to
TV
viewing.
System size.theThe
After formatting,
system
establish
a PVR
file
disk
now
ready
to
for
The
disk is
iswill
now
ready
to use
use
for recording.
recording.
The
disk
is
now
ready
to
use
for
recording.
System
size.
The
disk
is
now
ready
to
use
for
recording.
The
disk
is
now
ready
to
use
for
recording.
The
disk
is
now
ready
to
use
for
recording.
size.
The
disk
is
now
ready
to
use
for
recording.
The
disk
is
now
ready
to
use
for
recording.
The
disk
is
now
ready
to
use
for
recording.
systemSystem
according
to
the
previous
confirmed
PVR
file
The
disk
is
now
ready
to
use
for
recording.
The
disk
is
now
ready
to
use
for
recording.
The
disk
is
now
ready
to
use
for
recording.
The
disk
is
now
ready
to
use
for
recording.
The
disk
is
now
ready
to
use
for
recording.
The
ready
use
for
The
disk
now
ready
to
The
disk
is
now
ready
to
use
for
recording.
The
diskis
isto
now
ready
touse
usefor
forrecording.
recording.
Thedisk
diskis
isnow
now
ready
to
use
forrecording.
recording.
The
disk
is
now
ready
to
use
for
recording.
The
disk
is
now
ready
to
use
for
recording.
SystemSpeed
size.
Speed
Aft
Aft
Speed
After
Aft check PVR File System, it shows the USB available
Aft
Aft
Aft
Aft
After
PVRFile
Fileyou
System,
shows
theUSB
USB
available
Aft check
After
PVR
System,
ititshows
the
available
Aft
speed
and remind
to operate
it safely
with
this
Speedspeedcheck
and
remind
you
to
operate
it
safely
with
this
speed
and
remind
you
to
operate
it
safely
with
this
available
speed.
Speed
Speed
After check
PVRspeed.
File System, it shows the USB available
available
speed.
Speed
available
Speed
Speed
Speed
Speed
After
Check
PVR
System,
itit shows
the
USB
speed
and
remind
you
to
operate
itit
Speed
speed and
youFile
to operate
safely
with
thisavailable
After
Check
PVR
File
System,
shows
the
USB
available
speed
and
remind
you
to
operate
Speed
Afterremind
Check
PVR
File
System,
itshows
showsthe
theUSB
USB
availablespeed
speedand
andremind
remindyou
youto
tooperate
operateitit
it
After
Check
PVR
File
System,
shows
the
USB
available
speed
and
remind
you
to
operate
After
Check
PVR
File
System,
shows
the
USB
available
speed
and
remind
you
to
operate
it
After
Check
PVR
File
System,
itititit
available
safely
with
this
available
speed.
After
Check
PVR
File
System,
shows
the
USB
available
speed
and
remind
you
to
operate
it
safely
with
this
available
speed.
After
Check
PVR
File
System,
it
shows
the
USB
available
speed
and
remind
you
to
operate
available
speed.
After
PVR
File System,
it shows the USB available speed and remind you to operate itit
safelyCheck
withthis
this
available
speed.
safely
with
this
available
speed.
safely
with
this
available
speed.
safely
with
available
speed.
safely
with
this
available
speed.
safelywith
withthis
thisavailable
availablespeed.
speed.
safely
6H
23
23
23
Operation
PVR
and
Time
shiftOperation
PVR
and
Time
Shift
Operation
PVR
and
Time
shift
PVR
and
Shift Operation
Operation
PVR
and Time
Time Shift
Record Start (Instant Recording)
RecordStart
Start(Instant
(InstantRecording)
Recording)
Record
Record
Start
(Instant
Recording)
Youcan
can
press
the REC
RECbutton
buttontotostart
start
(and
thebutton
button
to stop)
recording
directly.
Record
Start
(Instant
Recording)
You
press
the
(and
the
to stop)
recording
directly.
If you want
You
canwant
pressto
the
REC
button
to
start
(and
the
button
to
stop)
recording
directly.
You
can
press
the
REC
button
to
start
(and
the
button
tothe
stop)
recording
directly.
you
want
to
stop
recording,
you
should
select
Stop
inselect
the
operation
menu
and
press
OK
button
to operate.
You
can
press
the
REC
button
to
start
(and
the
button
stop)
recording
directly.
IfIfpress
you
want
If you
stop
recording,
you
should
Stop
into
operation
menu
and
OK to
to
stop
recording,
you
should
select
Stop
in
the
operation
menu
and
press
OK
button
to
operate.
If
you
want
to
stop
recording,
you
should
select
Stop
in
the
operation
menu
and
press
OK
stop
recording,
you should select Stop in the operation menu and press OK button to operate.
button
to operate.
button
to operate.
The system
can record and play back DTV at the same time. Select the appropriate action from the
The
system
can
record
play
back
DTVDTV
at the
the
same
time.
Select
theappropriate
appropriate
action
fromthe
the the
The
system
can
record
and
back
at the
same
time.
Select
the appropriate
action
from
panel
above
and
pressand
OK
toplay
operate.
The
system
can
record
and
play
back
DTV
at
same
time.
Select
the
action
from
The
system
can
record
and
play
back
DTV
at
the
same
time.
Select
the
appropriate
action
from
the
panel
above
and
press
OK
to
operate.
panel
above
and
press
OK
to
operate.
panel above and press OK to operate.
panel above and press OK to operate.
The icon will be appear when you start to record.
The will
iconbe
will
be appear
youto
to record.
The
appear
whenwhen
you start
start
tostart
record.
The icon
icon
will
be
appear
when
you
record.
The icon will be appear when you start to record.
When you
the
timer
record,
it will
When
yousuccess
successtotosetset
the
timer
record,
it
When
success
totoset
the
timer
record,
it will
startyou
recording.
When
you
success
set
the
timer
record,
When
you success
to set the timer record, itit
will
start
recording.
start
recording.
Press
Play
to play what you have recorded, but the
will
start
recording.
will
start
recording.
Press
Play
play
what
recorded,
Press
Play
toisto
play
what
youyou
havehave
recorded,
but the
recording
still
on.
Press
Playrecording
to
play
what
you
haverecorded,
recorded,
Press
Play
to
play
what
you
have
recording
is
still
on.
but
the
is
still
on.
Press FB to play fast backward.
but
theFB
recording
isbackward.
still
on.
but
the
recording
is
still
on.
Press
toto
play
fast
Press
to
play
fast
backward.
PressFBFF
play
fast
forward.
Press
FB
to
play
fast
backward.
Press
FB
to
play
fast
backward.
Press
toto
play
fastfast
forward.
Press
FF
forward.video.
PressFFPre.
toplay
play
the
previous
Press
FFPre.
to
play
fast
forward.
Press
FF
to
fast
forward.
Press
Pre.
toplay
play
thethe
previous
video.
Press
to
the
previous
video.
Next
play
next
video.
Press
to play
Press
Pre.
to
play
thethe
previous
video.
Press
Pre.
to
the
previous
video.
Next
play
the
next
video.
Press
toplay
Press
Next
to
video.
Pause
to play
pause
thenext
scene
of video you are
Press
Next
to
play
the
next
video.
Press
Next
to
the
next
video.
Pause
toplay
pause
the
scene
you are
watching,
but
the
recording
is of
stillvideo
on.video
Press
Pause
to
pause
the
scene
of
you
watching,
but
the
recording
is
still
on.
Press
Pause
to
pause
the
scene
of
video
you
Press
Pause
to
pause
the
scene
of
video
you
are
watching,
butrecording.
the recording is still on.
Press
Stop to stop
are
watching,
but
therecording.
recordingisisstill
stillon.
on.
are
watching,
but
the
recording
Press
Stop
to to
stop
recording.
Press
Stop
stop
Press
Stop
to
stop
recording.
Press
Stop
to
stop
recording.
Time
Recorder
Time Recorder
Time
Recorder
Time
Recorder
Time
Recorder
Press
the“EPG”button
remote
control,the
theEPG
EPGmenu
menuwill
willappear
appearon
onthe
thescreen,select
screen. Select
1. Press
the“EPG”button
onon
thethe
remote
control,
Press
the “EPG”
button
the
remote
control,
the
EPG
menu
will
on
screen.
Press
the“EPG”button
remote
control,
the
EPG
menu
will
appear
onthe
themenu.
screen.Select
Select
1.1.aPress
onon
the
remote
control,
the
EPG
will
appear
on
the
screen,select
athe“EPG”button
programme
required
and
press
button
to
display
the
RECORDER
menu.
programme
required
and
press
the the
RECREC
button
tomenu
display
the
RECORDER
programme
button
display
the
RECORDER
menu.
aa programme
required
REC
button
to
display
theRECORDER
RECORDERmenu.
menu.
a programme
required
and and
presspress
the the RECREC
button
toto
display
the
803 AFD1, 4:3
803 AFD1,
4:3
Start Time
15 Time
Minute
Start
15 Minute
Hour
15 08
Minute
15 08
Minute
Hour
Month
08Dec
Hour
Month
08Dec
Hour
Dec07Month
Date
Dec07
Month
Date
07 End
DateTime
End
Time
07 Date
15
Minute
End Time
15Time
Minute
End
15 Minute
15 Minute
09 Hour
09 Hour
09 Hour
-
-
09Dec
Hour
Month
Dec07
Month
Date
07Mode
Date Once
Mode Once
+
+
2. Press
the / buttons
buttonsto
to select
select“Start
Time”item,
press
thethe/ / buttons
to set
the
"Srart
Time"
item,
press
buttons
to
2.2. Press
Pressthe
the /// buttons
buttons to
select
“Start
Time”
item,
press
the
to
theset the
2.
Press
the
to select
select“Start
press
thethe// /buttons
buttons
toset
set
beginning
recording
time.
2. Press
the
buttonstime.
to
"SrartTime”item,
Time" item,
press
buttons
tothe
set the
/
beginning
recording
beginning recording
recording time.
beginning
time.
time.
3.beginning
Use the recording
/ buttons
to select“End Time”item, press the / buttons to select the end
3.
Use
the
/
buttons to
select “End Time”
item, press
the
// buttons
to
the
end
3.3. Use
Use
therecorded.
Time”item,
presspress
the the
buttons
toselect
selectto
the
end the
the
buttonstotoselect“End
select "End
Time" item,
select
// buttons
time
/ buttons
time
recorded.
3. Use
the
buttons to select "End Time" item, press the / buttons to select the
/recorded.
time
recorded.
end
time
end time recorded.
2424
24PVR
PVR and
and Time
Time shift
shift Operation
Operation
PVR
and
Time
Shift
Operation
PVR
and
Time
Shift
Operation
PVR
and
Time
shift
Operation
PVR
and
Time
Shift
Operation
PVR
and
Time
shift
Operation
schedule list.
4. 4.Aschedule
confirmation
list. message will be displayed and the recording time will be added into the
Press the“EPG”button
then press the“YELLOW”to display the Schedule List.
4.5.
schedule
list.
schedule
list.
schedule
list.
5. Press
the“EPG”button
then press the“YELLOW”to display the Schedule List.
schedule list.
schedule
list.
5. Press the “EPG” button then press the “YELLOW” to display the Schedule List.
5. Press the“EPG”button then press the“YELLOW”to display the Schedule List.
Press the RED button to delete the channel you have recorded in the schedule.
Press the
the YELLOW
RED button
to delete
thethe
channel
haveand
recorded
in new
the schedule.
Press
button
to enter
timeryou
recorde
add the
channel in the
Press
the
YELLOW
button
to
enter
the
timer
recorde
and
add
the
new
channel
in the
Press
the
RED
button
to
delete
the
channel
you
have
recorded
in
the
schedule.
schedule.
Press
button
delete
channel
youhave
have
recorded
the
schedule.
Press
thethe
REDRED
button
to to
delete
thethe
channel
you
recorded
ininthe
Press
the
RED
button
delete
channel
have
recorded
inschedule.
the schedule.
schedule.
Press
the
RED
button
totodelete
thethe
channel
youyou
have
recorded
in the
schedule.
Press
the
YELLOW
button
to enter
the
timer
recorde
and
add
new
channel in the
Press
the YELLOW
button to enter the timer recorde and add the new channel in the
schedule.
Viewing
Recorded
Programs
schedule.
Viewing
Recorded
Programs
Viewing
Recorded
Programs
Viewing
Programs
AViewing
list ofRecorded
recorded
can Progr
be displayed
Vi
ew ingprograms
Recorded
am s by pressing
Recorded
Programs
A
ofofrecorded
can
be
displayed
by
pressing
Viewing
Recorded
Programs
Vibutton
ew programs
ingprograms
Recorded
Progr
am s by
Alist
list
recorded
programs
can
be
displayed
by
pressing
the
INDEX
on
the
remote
control
in
DTV by
A list
of
recorded
can
be
displayed
pressing
Abutton
list
of recorded
programs
can when
be displayed
Viewing
Recorded
Programs
A
list
ofofrecorded
programs
can
be
displayed
by
pressing
the
INDEX
on
the
remote
control
when
in
DTV
Neighbours
the
INDEX
button
on
the
remote
control
when
in
DTV
A
list
recorded
programs
can
be
displayed
by
pressing
mode.
You
can
navigate
through
the
list
by
using
the
A
list
of
recorded
programs
can
be
displayed
by
Vi
ew
ing
Recor
ded
Progr
am
s
the the
INDEX
button
on
the
remote
control
when
in
DTV
pressing
the
INDEX
button
on
the
remote
control
Neighbours
INDEX
button
on
the
remote
control
when
in
DTV
A
list
of
recorded
programs
can
be
displayed
by
pressing
mode.
You
can
navigate
through
the
list
by
using
the
Vi
ew
ing
Recor
ded
Progr
am
s
mode.
You
can
navigate
through
the
by
using
the
INDEX
button
on
the
remote
control
when
inthe
DTVthe
pressing
the
INDEX
button
onlist
the
remote
control
arrow
buttons
on
the
remote.
Press
RED
button
to
delete
mode.
You
can
navigate
through
thecan
list
by
using
the
when
in
DTV
mode.
You
navigate
through
A
list
of
recorded
programs
can
be
displayed
by
mode.
You
can
navigate
through
the
list
by
using
the
the
INDEX
button
on
the
remote
control
when
in
DTV
Neighbours
arrow
buttons
on
the
remote.
Press
RED
button
totodelete
when
in
DTV
mode.
You
can
navigate
through
the
arrow
buttons
on
the
remote.
Press
RED
button
delete
mode.
You
can
navigate
through
the
list
by
using
the
A
list
of
recorded
programs
can
beremote
displayed
by
the
current
recorded
program
or
INFO
to
listhighlighted
by
using
the
arrow
buttons
on
the
remote.
pressing
the
INDEX
button
on
the
control
arrow
buttons
on
the
remote.
Press
RED
button
to
delete
Neighbours
arrow
buttons
on
the
remote.
Press
RED
button
to
delete
mode.
You
can
navigate
through
the
list
by
using
the
the
current
highlighted
recorded
program
or
INFO
to
list
by
using
the
arrow
buttons
on
the
remote.
pressing
theremote.
INDEX
button
oncurrent
the
remote
control
the
current
highlighted
recorded
program
or
INFO
todelete
arrow
buttons
on
the
Press
RED
button
to
detailed
information.
OK
to
commence
Press
RED
toPress
delete
the
highlighted
when
inbutton
DTV
mode.
You
can
navigate
through
the
thedisplay
current
highlighted
recorded
program
or
INFO
to
the
current
highlighted
recorded
program
or
INFO
to
arrow
buttons
on
the
remote.
Press
RED
button
to
delete
display
detailed
information.
OK
to
commence
Press
RED
button
toorPress
delete
the
highlighted
when
in
DTVthe
mode.
You
can
navigate
through
display
detailed
information.
Press
OK
tocurrent
commence
thedetailed
current
recorded
program
or
INFO
to the
recorded
program
INFO
to
display
detailed
playback
of
the
selected
recorded
program.
listhighlighted
by
using
arrow
buttons
on
the
remote.
display
information.
Press
OK
commence
display
detailed
information.
Press
OK
to
the
current
highlighted
recorded
program
or
INFO
to
recorded
program
or
toto
display
detailed
playback
of
selected
recorded
program.
list
by
using
the
arrow
buttons
on
the
remote.
playback
ofthe
the
selected
recorded
program.
information.
Press
OK
to
commence
playback
display
detailed
information.
Press
OK
tocommence
commence
Press
RED
button
toINFO
delete
the
current
highlighted
38
playback
of information.
the
selected
recorded
program.
playback
of
the
selected
recorded
program.
Press
OK
to
commence
playback
display
detailed
information.
Press
OK
to
commence
Press
RED
button
to
delete
the
current
highlighted
of
the
selected
recorded
program.
38
recorded
program
or
INFO
to
display
detailed
playback
of the
recorded
program.
When
playing
backselected
recorded
programs,
you can control
of of
the
selected
recorded
program.
recorded
program
or
INFO
to
display
detailed
playback
the
selected
recorded
program.
When
playing
back
recorded
programs,
you
can
control
information.
Press
OK
to
commence
playback
the
playback
using
the
PLAY/PAUSE,
STOP,
FFWD,
and
FREV
38
When playing
back recorded
programs,
you canplayback
control
information.
Press
OK to program.
commence
the
playback
using
the
PLAY/PAUSE,
STOP,
FFWD,
and
FREV
When
playing
back
recorded
programs,
you
can
When
playing
back
recorded
programs,
you
can
control
of
the
selected
recorded
38
When
playing
back
recorded
programs,
you
can
control
When
playing
back
recorded
programs,
you
can
control
buttons
on
the
remote
as
you
would
for
media
mode.
the
playback
using
the
PLAY/PAUSE,
STOP,
FFWD,
and
When
playing
back
recorded
programs,
you
can
of
the
selected
recorded
program.
When
playing
back
recorded
programs,
you
can
control
control
the
playback
using
the
PLAY/PAUSE,
STOP,
onusing
theusing
remote
as
you would
for
media
mode.
thebuttons
playback
the
PLAY/PAUSE,
STOP,
FFWD,
and
the
playback
the
PLAY/PAUSE,
STOP,
FFWD,
and
the
playback
using
the
PLAY/PAUSE,
STOP,
FFWD,
and
FREV
FREV
buttons
on
the
remote
as
you
would
for
media
control
the
playback
using
PLAY/PAUSE,
STOP,
Recorded
List
FFWD,
and
FREV
buttons
onthe
the
remote
as
you
the
playback
using
the
PLAY/PAUSE,
STOP,
FFWD,
and
FREV
When
playing
back
recorded
programs,
you
can
Play
FREV
buttons
on
the
remote
as
you
would
for
media
FREV
buttons
on
the
remote
asyou
you
would
for
media
buttons
on
the
remote
as
would
for
media
mode.
Recorded
List
mode.
FFWD,
and
FREV
buttons
on
the
remote
as
you
Display
the
list
of
recorded
programs
by
pressing
the INDEX button
When
playing
back
recorded
programs,
you
can
Play
would
for
media
mode.
control
the
playback
using
the
PLAY/PAUSE,
STOP,
buttons
onplay
thethe
remote
as
youprogram,
would
forormedia
mode.
mode.
Press
OK would
to
selected
press
to
mode.
Display
the
list
of
recorded
programs
by
pressing
the
INDEX button
when
in
mode.
forDTV
media
mode.
control
the
playback
using
STOP,
Recorded
List
FFWD,
and
FREV
buttons
onthe
the
remote
asto
you
Press
OKrecorded
to
play
the
selected
program,
orPLAY/PAUSE,
press
Play
when
in
DTV
mode.
play
the
program
directly.
The
icon
will
Recorded
List
FFWD,
and
FREV
buttons
on
the remote
as you
Display
themedia
list of
recorded
programs
by
pressing
INDEX button
Play
would
for
mode.
Play:
Press
OK
to play
the
selected
program,
orpress
press
tothe
play
the
recorded
program
directly.
The
will
Play
Press
OK
to
play
the
selected
program,
oricon
to
Display
the
list
of
recorded
programs
by
pressing
Play
appear
when
you
start
playback.
when
in
DTV
mode.
would
for
media
mode.
Play:
Press
OK
to play
the
selected
program,
or
press
tothe INDEX button
Play:
P
ress
OK
to
play
the
selected
program,
or
press
to
Play
play
the
recorded
program
directly.
The
icon
will
Press
OK
to
play
the
selected
program,
or
press
to
Play
appear
when
you
start
playback.
Press
OK
to
play
the
selected
program,
or
press
to
play
the recorded program directly.
when
mode.
play the
OK in
toDTV
play
the selected
program,
press
playplay
thePress
recorded
program
directly.
The
icon
will
the
recorded
program
directly.
The or
iconwill
willto
playappear
the
recorded
program
directly.
Press
OK
to
play
the
selected
program,
press
toplay
play
the recorded program directly.
to
the
Press
OK
to
play
thedirectly.
selected
program,
oricon
press
when
you
start
playback.
play
the
recorded
program
directly.
The
icon
will
Delete
Play
The
icon
will
appear
when
youThe
start
playback.
recorded
program
The
icon or
will
appear
when
you
Play
appear
when
you
start
playback.
appear
when
you
start
playback.
Delete
Play
The
icon
will
appear
when
you start
recorded
program
directly.
The
icon playback.
will
appear
when
you the recorded program directly.
appear
when
you
start
playback.
Play
appear
when
you
start
playback.
start
playback.
Press
OK
to
play
the
selected
program,
or
press
to
play
Press
OK toto
play
the selected
program,
or press
to play the
Press the RED
button
delete
the selected
program.
start
playback.
Press
OK
to
play
the
selected
program,
or
toplay
play
the recorded program directly.
Press
OK
to
play
thedirectly.
selected
program,
orpress
press
to
the
Press
theDelete
RED
button
to
delete
the
selected
program.
Delete
The
icon
will
appear
when
you start
playback.
recorded
program
The
icon
will
appear when
you
Delete
Delete:
the
RED
button
to
delete
the
selected
program.
Info
Press
the
RED
button
to
delete
the
selected
program.
DeletePress
The
icon
will
appear
when
you
start
playback.
recorded
program directly. The icon will appear when you
Delete
start
playback.
Delete:
Press
the
RED
button
to
delete
the
selected
program.
Press
the
RED
button
to to
delete
thethe
selected
program.
Info
Press
the
RED
button
to
delete
selected
program.
Delete
Delete:
Press
the
RED
button
delete
selected
program.
Delete
start
playback.
Press
thethe
Display
or
green
to the
bring
up or
close program information.
Press
the
RED
button
to
delete
the
selected
program.
Press
RED
button
to button
delete
the
selected
program.
Delete
Press
theInfo
Display
or
green
button
to
bring
up
or
close
program information.
Press
the
RED
button
toto
delete
the
selected
program.
Info
Press
the
RED
button
delete
the
selected
program.
Info
Delete
Info: Press
the
Display
or
buttontoto
bring
or close
program
information.
Press
the
Display
orgreen
green
button
bring
up up
or
close
program
information.
Info
Press
the
RED
button
to
delete
the
selected
program.
Delete
Info
Info:
Press
the
Display
or
green
button
to
bring
up
or close
program
information.
Time
shift
Mode
Press
the
Display
or
green
button
to
bring
up
or
close
program
information.
Press
the
Display
or
green
button
to
bring
up
or
close
program
information.
Press
the
RED
button
to
delete
the
selected
program.
Info:
Press
the
Display
or
green
button
to
bring
up
or
close
program
information.
Info
Info
Time
shift
Mode
Press
the
Display
or
green
button
tocontrol
bring
up
close
program
information.
Press
the
RED
button
to button
delete
the
selected
program.
Press
the
Display
orpause
green
to bring
upor
or
close
Time
shift
may
be
used
to
and
live
TV
(digital
only).
When
watching digital TV
Info
Press
the
Display
or
green
button
bring
closecontrol
program
information.
Timeshift
Mode
Press
the
Display
green
button
toto
bring
upup
oror
close
Time
Shift
Mode:
Time
Shift
may
becontrol
used
tolive
pause
and
live
TV (digital
only).
when
program
information.
Time
shift
may
be
used
toor
pause
and
TV
(digital
only).The
When
watching
digital
TV
Info
Time
shift
Mode
Press
the
Display
or
green
button
to
bring
up
or
close
program
information.
Timeshift
Mode
program,
press
the
PLAY/PAUSE
button
to
start
time
shift
mode.
playback
will
pause
and
Time
Shift
Mode:
Time
Shift
may
be
used
to
pause
and
control
live
TV
(digital
only).
when
program
information.
Timeshift
may
be used
tobutton
pause
control
live
TV
(digital
only).
When
watching
digital
TV
Info
watching
digital
TV and
program,
press
the
PLAY/PAUSE
button
to
start
time
Time
shift
Mode
Press
the
Display
or
green
button
to
bring
up
or
close
program,
press
the
PLAY/PAUSE
to
start
time
shift
mode.
The
playback
will
pause
and
Time
Shift
Mode:
T
ime
Shift
may
be
used
to
pause
and
control
live
TV
(digital
only).
when
Time
shift
may
be
used
to
pause
and
control
live
TV
(digital
only).
When
watching
digital
TV
Timeshift
may
be
used
to
pause
and
control
live
TV
(digital
only).
When
watching
digital
recordingprogram,
will
commence
inPLAY/PAUSE
background.
To
resume
playback,
press
PLAY/PAUSE
again.
You
watching
digital
TV button
program,
press
the
PLAY/PAUSE
button
towill
start
time
Timeshift
Mode
press
the
tolive
start
mode.
The
playback
pause
and
Press
the
Display
orthe
green
button
to bring
up
ortimeshift
close
shift
mode.
The
playback
will
pause
and
recording
will
commence
in
the
program
information.
Time
shift
may
be
used
to
pause
and
control
TV
(digital
only).
When
watching
digital
TV
recording
will
commence
in
the
background.
To
resume
playback,
press
PLAY/PAUSE
again.
You
watching
digital
TV
program,
press
the
PLAY/PAUSE
button
to
start
time
Timeshift
Mode
program,
press
the
PLAY/PAUSE
button
to start
timeshift
mode.
The
playback
willpause
pause
program,
press the
PLAY/PAUSE
to start
time
shift
mode.
The
playback
will
shift
mode.
The
playback
will
pause
and
recording
will
commence
inalso
theand
recording
will
commence
inbutton
the
background.
To
resume
playback,
press
PLAY/PAUSE
again.
program
information.
Timeshift
may
be
used
to
pause
and
control
live
TV
(digital
only).
When
watching
digital
TV
background.
To
resume
playback,
press
PLAY/PAUSE
again.
You
can
program,
press
the
PLAY/PAUSE
button
to
start
time
shift
mode.
The
playback
will
pause
and
shift
mode.
The
playback
will
pause
and
recording
will
commence
in
the
recording
will
commence
in
the
background.
To
resume
playback,
press
PLAY/PAUSE
again.
Timeshift
may
be
used
to
pause
and
control
live
TV
(digital
only).
When
watching
digital
TV
recordingprogram,
will commence
the
To
resume
playback,
press
PLAY/PAUSE
again.and
You
background.
Tobackground.
resume
playback,
press
PLAY/PAUSE
again.
You can
press theinPLAY/PAUSE
button
to start
timeshift
mode.
The
playback
will also
pause
recordingprogram,
will commence
in
the
background.
To
resume
playback,
press
PLAY/PAUSE
again.
You
press
the PLAY/PAUSE
to start
mode. The
playback
will also
pause
and
background.
To resume
playback,
press
PLAY/PAUSE
again.
You
can
recording
will commence
in the button
background.
Totimeshift
resume
playback,
press
PLAY/PAUSE
again.
recording
will
commence
in
the
background.
To
resume
playback,
press
PLAY/PAUSE
again.
use FFWD
and FREV
to skip through the buffered content.
only be able to playback
at normal
speed.
youto
will
only be able
to playback
at normal speed.
only
be able
playback
at normal
speed.
NOTE:
you will only be able to playback at normal speed.
NOTE:
Press
the
STOP
button
to
cancel
time
shift
mode.mode.
you
will
only
be
able
to
playback
at
normal
speed.
only
bePress
able
tobutton
playback
at normal
speed.
the
STOP
button
to through
cancel
timeshift
NOTE:
Whilst
you
can
fast
forward
the
recording
Press
the
STOP
cancel
time
shift
mode.
you
will
be
able
to to
playback
at
normal
speed.
you
will
only
be
able
to
at
normal
speed.buffer, once you ‘catch up’ to live TV,
only
beonly
able
to
playback
at normal
speed.
Press
the
STOP
button
toplayback
cancel
timeshift
mode.
you
willto
only
be able to
at normal speed.
you will
only
able
playback
atplayback
normal
speed.
Press
thebe
STOP
button
to
cancel
time
shift
mode.
Press
the
STOP
button
to
cancel
timeshift
mode.
Press
toto
cancel
the
time
shift
mode.
Pressthe
theSTOP
STOPbutton
button
cancel
time
shift
mode.
Pressbutton
the STOP
cancel
mode.
Press the STOP
tobutton
cancelto
the
timetimeshift
shift mode.
Press the STOP button to cancel the time shift mode.
38
38
38
38
The
Display(OSD)
(OSD)Menu
Menu
The On-Screen
On-Screen Display
25
25
Navigating through menus
Navigating through menus
Press the [MENU] button for the OSD main menu to appear.
tPrFTTUIF<.&/6>CVUUPOfPSUIF04%NBJONFOVUPBQQFBr.
Press
for the main menu to display sequentially:
tPrFTT fPSUIFNBJONFOVUPEJTQMBZTFRVFnUJBMMy:
Channel
Picture
Sound
Time Lock Setup ...
$IBOOFM
PJcUVrF in4PVOE
TJNF
LPDL
4FUVQ
Menu
options displayed
grey are not
available
in that
mode.…
.FOVPQUJPOTEJTQMByFEJOgrFZBrFOPUBvBJMBCMFJOUIBUNPEe.
Common operation procedures
Common
operation
procedures
For
each main
menu, press
or [OK] to enter its submenu.
tFPSFBDINBJONFOVQrFTT
PS<0K>UPFnUFSJUTTVCNFOV.
Press
/ to select the desired adjustment
option.
Press
choose your desired value.
tPrFTT/ / toUPTFMFcUUIFEFTJrFEBEKVTUNFnUPQUJPO
After
having
set an option, press[MENU] to return to the upper level menu, or press [EXIT] to
tPrFTT
/ UPDIPPTFyPVSEFTJrFEvBMVe.
quit
the menu screen directly.
tAfUFSIBWJOHTFUBOPQUJPOQrFTT<.&/6>UPrFUVrOUPUIFVQQFSMFvFMNFOVPS
QrFTT<&9*T>UPRVJUUIFNFOVTDrFFOEJrecUMy.
OSD menu structure
OSD menu structure
$)"//&-
5*.&
AVUoTVOJOH
$MPDL
AvBJMBCMFJO%T7POMZ
AT7.BOVBMTVOJOH
TJNFZone
AvBJMBCMFJO%T7POMZ
%T7.BOVBMTVOJOH
4MFFQTJNFS
ProgrBN&EJU
4JgOBM*nforNBUJPO
AVUP4UBOECy
AvBJMBCMFJO%T7POMZ
04%TJNFS
%BZMJHIU-4BWJOHTJNF
1*C563&
L0$,
PJcUVrF.PEF
AvBJMBCMFJO%T7POMZ
LPDL4ysUFN
4FUPBTTworE
ConUrBTU
#MPDLProgrBN
BrJHIUOFTT
PBrenUBM(VJEBOce
CPMPVS
AvBJMBCMFJO%T7POMZ
,FZLock
TJnU
HoUFM.PEF
4IBrQOFTT
CPMPVSTFNQFrBUVre
/PJTF3FEVcUJPO
4&561
04%MBOHVBHF
T5-BOHVBHF
406/%
4PVOE.PEF
)FBrJOH*NQBJrFE
AvBJMBCMFJO%T7POMZ
TrFCMF
173FJMF4ysUFN
AvBJMBCMFJO%T7POMZ
#BTT
ATQFcU3BUJP
#BMBOce
#MVF4creen
AVUoVPMVNF
FJSTUTJNF*OTUBMMBUJPO
41%*'.PEF
"%4XJUDI
3FTFU
AvBJMBCMFJO%T7POMZ
4ofUwBrF6QEBUF64#
PDF processed with CutePDF evaluation edition www.CutePDF.com
26
26
26
Menu
Options on TV Mode
Menu
MenuOptions
Optionson
onTV
TVMode
Mode
Channel menu
Channel
menu
Press
[MENU]
to display the main menu.
Channel
menu
Press[MENU]
/ to select
Channel
in the main
menu,
Press
totodisplay
the
Press [MENU]
display
themain
mainmenu.
menu.
then press
or [OK]Channel
to enter. in the main
Press
/
to
select
Press / to select Channel in the main
menu,
menu,then
thenpress
press oror[OK]
[OK]totoenter.
enter.
Auto tuning
Auto
Press
or [OK] to start searching channels
Autotuning
tuning
Press
automatically.
[OK]totostart
startsearching
searchingchannels
channels
Press oror[OK]
automatically.
automatically.
Auto Tuning
ATV Auto
ManualT
uning
Tuning
DTV ATV
ManualT
uninguning
ManualT
Programme
Edit uning
DTV ManualT
Signal
InformationEdit
Programme
CHANNEL
CHANNEL
Move
Signal Information
MENU
Move
Return
MENU
ATV Manual tuning
ATV
tuning
ATVManual
Manual
Press
or [OK] tuning
to enter the ATV Manual Tuning sub-menu.
Press
oror[OK]
to enter
ATV
Manual
Tuning
•Press
Current
CH:toPress
/the to
select
the channel
number
[OK]
enterthe
ATV
Manual
Tuningsub-menu.
sub-menu.
tCurrent
CH:
Press
/
to
select
the
channel
number
you
want
to
store.
tCurrent CH: Press / to select the channel number
want
•you
Colour
you
wanttoSystem:
tostore.
store.Press / to change the colour system
to Auto,
SECAM,
PAL.
tColour
System:
tColour System:Press
Press / / totochange
changethe
thecolour
coloursystem
system
•to Auto,
Sound
System:
Press / to change the sound system
SECAM,
PAL.
to Auto, SECAM, PAL.
to DK, I, BG. Press / to change the sound system
tSound
tSoundSystem:
System: Press / to change the sound system
•to DK,
Fine-Tune:
Press / to scan the current channel
to within
DK,I, BG.
I, BG.
a Press
frequency
range accurately
and store the result
tFine-Tune:
tFine-Tune:
Press / / totoscan
scanthe
thecurrent
currentchannel
channel
manually.
within
a afrequency
range
accurately
and
store
the
within
frequency
range
accurately
and
store
theor
•result
AFC:
Select the Automatic Frequency Control to On
manually.
result
manually.
Off.
tAFC
tAFC
•
Search:
Press/ to
/ to start
search.
tSearch:
Press
tSearch:
Press
/ tostart
startsearch.
search.
DTV
manual
tuning
DTV
Press
or [OK]tuning
to
enter the DTV Manual Tuning sub-menu.
DTVmanual
manual
tuning
or
totoenter
Tuning
Press
Press
to select
thethe
channel,
then
press
[OK].sub-menu.
[OK]
enter
theDTV
DTVManual
Manual
Tuning
sub-menu.
Press /or[OK]
Press
/
to
select
the
channel,
then
press
Programme
Press / toedit
select the channel, then press[OK].
[OK].
Press or [OK]
to enter the Programme Edit sub-menu,
Programme
edit
Programme
edit
where
you
have
5enter
functions
for editing theEdit
current
channel:
oror[OK]
toto
the
Press
[OK]
enter
theProgramme
Programme
Editsub-menu,
sub-menu,
Pressthe
Press
RED
button
to
delete
the
current
channel.
where
you
have
forforediting
the
where
you
have5button
5functions
functions
editing
thecurrent
currentchannel:
channel:
the
GREEN
totorename
itthe
(ATV
only).
1.Press
Press
the
RED
button
delete
current
channel.
1.
Press
the
RED
button
to
delete
the
current
channel.
the YELLOW
button and
the / keys
to move it (ATV
2.Press
2.Press
Pressthe
theGREEN
GREENbutton
buttontotorename
renameit it(ATV
(ATVonly).
only).
only).
3.3.Press
the
YELLOW
button
and
the
/ / keys
totomove
Press
the
YELLOW
button
and
the
keys
moveit it
Press
the
BLUE button to skip it.
(ATV
only).
(ATV
only).
[FAV]
to
add button
it to yourtofavourite
4.Press
BLUE
it.it.channels list. If it
4.Press
Pressthe
button
toskip
skip
already
isthe
oneBLUE
of your
favourite
channels,
pressing this button
5.5.Press
[FAV] totoadd
it totoyour
Press
yourfavourite
favouritechannels
channelslist.
list.If Ifit it
again
will[FAV]
delete it add
fromitthe
list.
OK
Return
Select
OK
EXIT
Select
Exit
EXIT
Exit
already
alreadyis isone
oneofofyour
yourfavourite
favouritechannels,
channels,pressing
pressingthis
this
button
again
will
delete
it
from
the
list.
button again will delete it from the list.
Signal information (DTV only)
Signal
(DTV
only)
Press
or
[OK] to enter
this sub-menu,
Signalinformation
information
(DTV
only) where the current
signal information
is displayed
(channel, frequency,
quality, signal information is
or
[OK]
to
enter
this
sub-menu,
Press
Press or [OK] to enter this sub-menu,where
wherethe
thecurrent
current signal information is
strength). (channel, frequency, quality, strength).
displayed
displayed (channel, frequency, quality, strength).
27
27
Menu Options on TV Mode (Cont.)
Menu Options in TV Mode (Cont.)
Picture menu
Press
[MENU]
to display the main menu.
Picture
menu
Press
/ to select
Picturethe
in the
main
menu,
Press [MENU]
to display
main
menu.
then
press
to enter.
Press
/ orto[OK]
select
Picture in the main
menu, then press or [OK] to enter.
Picture mode
Press
/ mode
or [OK] to enter the Picture Mode
Picture
sub-menu.
Press / or [OK] to enter the Picture Mode
Press
/ to change the picture mode in
sub-menu.
sequence:
Press / Dynamic
to changeStandard
the pictureMild
mode in
Personal.
sequence: Dynamic Standard Mild Personal.
You can also press [P.MODE] repeatedly on the remote control to change the picture mode
You can also press [P.MODE] repeatedly on the remote control to change the picture
directly.
e ium
mode directly.
NOTE: Contrast, brightness, colour and sharpness value can only be adjusted in “Personal
NOTE: Contrast, brightness, colour and sharpness value can only be adjusted in
Mode”.
“Personal Mode”.
Contrast
Contrast
Press
then
press
setset
thethe
picture
contrast
Press / / or
or [OK]
[OK]totoenter
enterthe
thesub-menu,
sub-menu,
then
press/ /toto
picture
contrast
intensity.
intensity.
Brightness
Brightness
Press
then
press
setset
thethe
picture
brightness.
Press / / or
or [OK]
[OK]totoenter
enterthe
thesub-menu,
sub-menu,
then
press/ /toto
picture
brightness.
Colour
Press
Colour/ or [OK] to enter the sub-menu, then press
/
to set the picture colour intensity.
Press / or [OK] to enter the sub-menu, then press / to set the picture colour
Tint
intensity.
Press / or [OK] to enter the sub-menu, then press
available
Tint for NTSC video signal).
/
to set the picture tint (only
Press / or [OK] to enter the sub-menu, then press / to set the picture tint
(only available for NTSC video signal).
Sharpness
Press / to set the picture sharpness.
Sharpness
Press temp
/ to set the picture sharpness.
Colour
Press
/
to change the colour temperature in sequence: Cold Normal Warm.
Colour temp
Pressreduction
/ to change the colour temperature in sequence: Cold
Noise
Press / or [OK] to enter the submenu, then press
Noise reduction
sequence:
Off Low Medium High Default.
/
Normal
Warm.
to change the noise reduction in
Press / or [OK] to enter the submenu, then press / to change the noise
Low Medium High Default.
28
28
28
Menu Options on TV Mode (Cont.)
MenuOptions
OptionsininTV
TVMode
Mode(Cont.)
(Cont.)
Menu
Sound menu
Sound
menu
Press
[MENU]
to display the main menu.
Sound
menu
Press /[MENU]
to display
main
Press
to
Soundthe
inthe
the
mainmenu.
menu,
Press
[MENU]select
to
display
main
Press
select
Sound in
the menu.
main menu,
then
press/ orto
[OK]
to enter.
Press
/ to select
Sound
in the main menu,
then press
or [OK]
to enter.
then press or [OK] to enter.
Sound mode
Sound
Press
/ mode
or [OK] to enter the Sound Mode
Sound
Press mode
/ or [OK] to enter the Sound Mode
sub-menu.
Press
/ or [OK] to enter the Sound Mode
sub-menu.
Press
/ to change the sound mode in
sub-menu.
Press /Standard
to changeMusic
the sound
mode in
sequence:
Movie
Press
/ toStandard
change theMusic
sound mode
in Sports
sequence:
Movie
Sports Personal.
Personal.
sequence:
Standard
Music repeatedly
Movie Sports
Personal.
You can also
press [S.MODE]
on the remote
control to change the sound
You
can
[S.MODE]
repeatedly
on the
control
to change
the sound
You
canalso
alsopress
press
[S.MODE]
repeatedly
on remote
the remote
control
to change
themode
sound
mode
directly.
directly.
mode
directly.
NOTE: Treble and bass values can only be individually adjusted in Personal mode.
NOTE:
values
cancan
onlyonly
be individually
adjusted
in Personal
mode. mode.
NOTE:Treble
Trebleand
andbass
bass
values
be individually
adjusted
in Personal
Treble / Bass / Balance
Treble
/ Bass / Balance
Treble
Balance
Press / Bass
/ or /[OK]
to enter the sub-menu, then press / to set your desired value
Press
// or [OK]
to
the
then
press
/ to setset
your
desired
value for treble
Press
[OK]
toenter
enter
thesub-menu,
sub-menu,
then
press
your
desired
for treble or bass,
or
set your
desired balance
for the/lefttoand
right
channelvalue
speakers.
or
or set
your desired
balance
for the
left andfor
right
forbass,
treble
or bass,
or set your
desired
balance
thechannel
left andspeakers.
right channel speakers.
Auto volume
Auto
volume
Auto
Pressvolume
/ or [OK] to enter the sub-menu, then set the automatic volume level to On
Press
then
set set
the the
automatic
volume
level to
On to
or Off.
Press // or [OK]
[OK]to
toenter
enterthe
thesub-menu,
sub-menu,
then
automatic
volume
level
On
When set to On, the volume of the channel is automatically controlled.
SPDIF Mode
SPDIF Mode
You can
select the type of digital sound output from the COAXIAL connection for
SPDIF
Mode
You
can selectathe
typesystem.
of digital sound output from the COAXIAL connection for
connecting
sound
You
can select the
type of
digital sound output from the COAXIAL connection for connecting
connecting
a
sound
system.
Press system.
/
a sound
Press /
Press / or [OK] to set the SPDIF mode to Auto, PCM or Off.
AD switch (DTV only)
AD
switch
(DTV
AD
switch
(DTVonly)
only)
The
AD (audio
dynamic)
switch automatically
The
AD
(audio
dynamic)
automatically
The
AD
(audio
dynamic)
switch
automatically
adjusts volume levelsswitch
for
programmes
that have
adjusts
volume
levels
forfor
programmes
thatthat have
adjusts
volume
levels
programmes
hearing impaired data.
have
hearing impaired
data.
hearing
Press impaired
/ or [OK]data.
to enter the AD switch subPress
/
or
[OK]
to
enter
the
AD
switch
Press
or [OK]
to enter
the
AD
switch
// to
select
On
and subadjust
menu,/ then
press
submenu,
then
press
to
select
Onand
andadjust
/
to
select
On
menu,
then
press
the
AD
volume.
adjust
AD volume.
the ADthe
volume.
Menu Options on TV Mode (Cont.)
Menu Options in TV Mode (Cont.)
29
29
Time menu
Time menu
Press [MENU] to display the main menu.
Press [MENU]
to display
Press
/ to select
Time inthe
themain
main menu.
menu,
Press
/
to
select
Time
in
the
main menu,
then press or [OK] to enter.
then(DTV
pressonly)
or [OK] to enter.
Clock
Display the current system time.
Clock (DTV only)
NOTE: You cannot change the time
Display the current system time.
manually in DTV mode, as the time
NOTE:
You cannot
the time
comes directly
from achange
signal source.
manually in DTV mode, as the time
Time Zone
(DTVdirectly
only) from a signal source.
comes
Press / or [OK] to enter the sub-menu, then press
time
zone
according
to your region.
Time
Zone
(DTV only)
/
/
/
to set the appropriate
Press / or [OK] to enter the sub-menu, then press / / / to set the appropriate
Sleep
time timer
zone according to your region.
You can select to have the sleep timer off, or set it to switch the TV off automatically after a
certain
Sleeptime.
timer
Press / or [OK] to enter the Sleep Timer sub-menu, then press / to set the sleep timer
toafter
off, or
to switch
the TV off automatically after 10, 20, 30 ,60, 90, 120, 180 or 240 minutes.
a certain
time.
You
can also
press
repeatedly
onTimer
the remote
controlthen
to change
Press
/ or
[OK][SLEEP]
to enter
the Sleep
sub-menu,
press the
/ sleep
to settimer
the
directly.
180 or 240 minutes.
Auto
You stand-by
can also press [SLEEP] repeatedly on the remote control to change the sleep
You
candirectly.
select the time after which you want the TV to switch automatically to stand-by.
timer
Press / or [OK] to enter the sub-menu, then press / to set auto stand-by to Off, 3hrs,
4hrs
or 5hrs.
Auto
stand-by
You can select the time after which you want the TV to switch automatically to
OSD
Timer
stand-by.
You
can set
preferred
duration
for on-screen
Press
/ your
or [OK]
to enter
the sub-menu,
thendisplay
press messages.
/
Press
/ oror[OK]
to enter the sub-menu, then press / to set the OSD timer to 5, 10, 15,
3hrs, 4hrs
5hrs.
20, 25 or 30 seconds.
OSD Timer
Daylight-Saving
Time
(DTV only)
You can set your
preferred
duration for on-screen display messages.
Press / / or
or[OK]
[OK]totoset
enter
the sub-menu,time
thentopress
/ to set the OSD timer to
Press
the daylight-saving
On or Off.
5, 10, 15, 20, 25 or 30 seconds.
Daylight-Saving Time (DTV only)
Press /
30
30
30
MenuOptions
Optionson
in TV
TV Mode
(Cont.)
Menu
Menu
Options
in
TV
Mode (Cont.)
(Cont.)
Lock
menu
Lock
menu
Lock
menu
Press
[MENU]
to display
display
the main
main
menu.
Press
[MENU]
to display
the main
menu.menu.
Press
[MENU]
to
the
Press
/
to
select
Lock
in
the
main
menu,
Press
select
Lock
in the
mainmain
menu,
Press / / toto
select
Lock
in the
menu,
then
press
or
[OK]
to
enter.
then
press
to enter.
then
pressor [OK]
or [OK]
to enter.
Lock
system
Lock
system
Lock
system
This
allows
you
to turn
turn
the system
system
lock on
on
This
allows
youyou
to turn
the system
lock on
This
allows
to
the
lock
or off. When this option is “on”, you cannot
manually
search
andand
adjust
channels.
To
manually
search
and
adjust
channels.
To change
change this
this
manually
search
adjust
channels.
To
change this setting, you must enter a password
first:
the default
password is 0000.
password
is 0000.
password is 0000.
Set password
Set password
password
Press
or [OK] to enter the sub-menu to set a new password.
Set
Press
or [OK]
[OK]the
topassword
enter the
thebysub-menu
sub-menu
toold
setand
new
You
can change
entering the
a new
Press
or
to
enter
to
set
aa new
password
and
then
re-entering
it
to
confirm
the
new
one.
password.
You
can
change
the
password
by
entering
password. You can change the password by entering
password. You can change the password by entering
the old
old and
and aa new
new password
password and
and then
then re-entering
re-entering it
it to
to
the
If you forget your password, input: 4711. This is the override
code and will allow you access to reset your password (the
master
code
cannot
be password,
changed). input: 4711. This is the
If you
forget
your
If you forget your password, input: 4711. This is the
override code
code and
and will
will allow
allow you
you access
access to
to reset
reset your
your
override
password
(the
master
code
cannot
be
changed).
password (the master code cannot be changed).
Block programme (channel)
Press
[OK] to enter the
Block Programme sub-menu,
Blockorprogramme
programme
(channel)
Block
(channel)
where
you can add or release
a lock to certain channels.
Press or
or [OK]
[OK] to
to enter
enter the Block
Block Programme
Programme sub-menu,
sub-menu,
ToPress
watch a locked
channel, the
enter the correct
password
where
you
can
add
or
release
a
lock
to
certain
channels.
where
you canbox
addwhen
or release
a lock
toinitial
certain
channels.
into
the dialogue
prompted.
The
(default)
To
watch
a
locked
channel,
enter
the
correct
password
password
is 0000.
Use channel,
it to enter enter
the system
and set password
your
To watch
a locked
the correct
intoPress
the the
dialogue
box
when
prompted.
Thechannel,
initial
own.
GREENbox
button
to lock
the desired
into
the
dialogue
when
prompted.
The
initial
(default)
password
is
0000. Use
Use it
it to
to enter
enter the
the system
system
press
it again
to unlock is
it.0000.
(default)
password
and set
set your
your own.
own.
and
Press
the
GREEN
button
to lock
lock the
the desired
desired channel,
channel,
Parental
guidance
only)
Press the
GREEN(DTV
button
to
press
it
again
to
unlock
it.
Press
or [OK]totounlock
enter this
press/it again
it. sub-menu, where you can
block individual programmes based on their rating.
Parental
guidance
(DTV only)
only)
Press
/ to
set the parental
guidance level. You can
Parental
guidance
(DTV
Press
/
or
[OK]
to
enter
this
sub-menu,
you
choose
from
different
classification
categories, aswhere
picture
on
Press / or [OK] to enter this sub-menu,
where
you
the
light.
can
block
individual
programmes
based
on
their
rating.
can block individual programmes based on their rating.
can block individual programmes based on their rating.
Press // to
to set
set the
the parental
parental guidance
guidance level.
level. You
You can
can
Press
pictured on
on the
the right.
right.
pictured
P
P
P
C
C
C
Menu
TV Mode
Mode (Cont.)
(Cont.)
MenuOptions
Optionson
in TV
31
Key Lock
Key lock
Press / or [OK] to set the Key Lock On or Off. Set to On, the keys on the side panel of the
tPrFTT /
TV set are locked and cannot operate the TV set. You can only operate the TV with the remote
QBOFMPGUIeT7TFUBrFMPDLFEBOEDBOOPUPQFraUFUIFT7TFU.YPVDBOPOMZPQFraUF
control.
UIFT7XJUIUIFrFNPUFDPnUrPl.
Hotel mode
Hotel mode
Press / or [OK] to select Hotel Mode On or Off. Set to On, you can set the following values.
PrFTT /
GPMMPXJOHvBMVFs.
• Source Lock: Set the input source item you want to be locked.
tSource
Lock:
Set
source
item you
want
be locked.
• Default
Source:
Setthe
theinput
default
input source
when
youto
switch
on the TV main unit.
tDefault
Source:
Set
the
default
input
source
when
you
switch
• Default Prog: Set the default ATV channel when you switch
on theon
TV.the TV main unit.
tDefault
Prog:
Set
the
default
ATV
channel
when
you
switch
on
the TV.
• Max Volume: Set the maximum volume value.
tMax
Volume:
Set
the
maximum
volume
value.
• Clear Lock: Clear all hotel mode locks.
tClear Lock:
Clear all hotel mode locks.
Set-up menu
• Press [MENU] to display the main menu.
Set-up
menu
• Press / to select Set-up in the main menu, then press
or [OK] to enter.
tPrFTT<.&/6>UPEJTQMaZUIFNBJONFOV.
tPrFTT / UPTFMFDUSeUVQJOUIFNBJONFOVUIFOQrFTT PS<OK>UPFnUer.
OSD Language
• Press / or [OK] to enter the OSD
OSD
Language
Language sub-menu.
tPrFTT / PS<OK>UPFnUFSUIF04%
• Press / / / to select your preferred
-BOHVBHFTVb-menV
OSD menu language. The factory default
tPrFTT
/ is /English.
/ UPTFMFDUZPVSQreGerrFE
setting
04%NFOVMBOHVBHe.TIFGBDUPrZEFGBVMU
TTTFUUJOHJT&OHMJTI
Language
Press / or [OK] to enter the sub-menu, then
TT Language
press
/ to set the teletext language.
PrFTTthis/ function
PS<OK>UPFnUFSUIFTVb-menVUIFOQrFTT
/ UPTFUUIFUeleUexU
NOTE:
is not applicable for the
MBOHVBHe
Australian market, except for closed captions.
NOTE:TIJTGVODUJPOJTOPUBQQMJDBCMFGPSUIFAVTUrBMJBONBrLFUexDFQUGPSDMPTFE
Hearing DBQUJPOsSFFQBHF6GPSNPrFPOUIJs.
Impaired (DTV only)
Press / or [OK] to set the Hearing Impaired option to On or Off to display subtitles, if
Hearing impaired (DTV only)
available.
PrFTT /
JGavBJMBCMe.
32
32
Menu
Options in
onTV
TVMode
Mode(Cont.)
(Cont.)
Menu Options
PVR File system (DTV only)
PVR File system (DTV only)
Insert your USB device (FAT32 format only) into
Insert your USB device (FAT32 format only) into
the USB port.
the USB port.
Press or [OK] to enter the sub-menu, where
Press or [OK] to enter the sub-menu, where
you can check the USB device connected for
you can check the USB device connected for
recording.
recording.
Press / to select “Check PVR File System”,
Presspress
/ [OK]
to select
“Check
PVRThis
Fileprocess
System”,
then
to start
checking.
then
press
[OK]
to
start
checking.
This
will take a few seconds. At the end of the process
will takethe
a few
seconds.
At will
the appear
end of after
the
process,
word
“SUCCESS”
process,
the
word
“SUCCESS”
will
appear
“Check PVR File System” and the speed will after
“Check
PVR
System”
and You
the speed
will
be
shown
on File
the menu
as well.
can now
record
and save
themenu
DTV programme.
be shown
on the
as well. You can now
recordWe
andrecommend
save the DTV
programme.
NOTE:
using
a hard disk with built-in power supply.
NOTE: We recommend using a hard disk with built-in power supply.
Aspect Ratio
Aspect/ ratio
Press
or [OK] to enter the sub-menu, then press / to change the aspect ratio to
Press4:3,
/ 16:9,
or [OK]
to enter
theJust
sub-menu,
then
press
/ setting.)
to change the aspect ratio
Auto,
Zoom1,
Zoom2,
Scan. (16:9
is the
default
to
Auto,
4:3,
16:9,
Zoom1,
Zoom2,
Just
Scan.
(16:9
is
the
default
setting.)to the data
NOTE: Just Scan is panoramic display, so black edging may appear according
rate.
Auto
and
Just
Scan
may
be
not
available
in
some
sources.
NOTE: Just Scan is panoramic display, so black edging may appear according to the
data rate. Auto and Just Scan may be not available in some sources.
Blue screen
Press
/ or [OK] ti set the blue screen display to On or Off. Set to On, it will display a blue
Blue screen
screen
there is no signal on the currently selected source.
Press when
/
a blue screen when there is no signal on the currently selected source.
First time installation
Press
or [OK]
to enter relevant options including OSD language and channel tuning (see
First time
installation
page
18
for
more
Press or [OK] todetail).
enter relevant options including OSD language and channel
tuning (see page 18 for more detail).
Reset
Press
Reset or [OK] to enter the sub-menu, then press to select Yes to restore factory default
settings.
Press or [OK] to enter the sub-menu, then press to select Yes to restore factory
default settings.
Software update (USB)
Press
or [OK]
to select
this setting for software updates that the manufacturer may supply.
Software
update
(USB)
Detailed
will be
sent
with the
updating.
[OK] to select
this
setting
for software
softwarefor
updates
that the manufacturer may
Press orinformation
supply. Detailed information will be sent with the software for updating.
Menu Options on PC Mode
Menu Options in PC Mode
33
33
Make sure you have your computer properly
connected
toyou
the TV
andyour
turned
on.
Make sure
have
computer
properly
Press
[SOURCE]
the
remote
control
connected
toon
the
TVTVand
turned
on. and
select
from the input
menu.control
PressPC[SOURCE]
on thesource
TV remote
and select PC from the input source menu.
The
available
menus
willwill
be displayed
on the
The
available
menus
be displayed
on
screen.
Most
of
the
menus
have
already
the screen. Most of the menus havebeen
already
described on the previous pages.
been described on the previous pages.
NOTE:
NOTE: The screen menu is specific to PC mode
mode
and will
only
appear
if you have a computer connected to the TV.
and will only
appear
if you
have
a computer
connected to the TV.
Screen menu
Press menu
[MENU] to display the main menu.
Screen
Press
/ totoselect
Screen
in the
main menu, then press or [OK] to enter.
Press
[MENU]
display
the main
menu.
Press / to select Screen in the main menu, then press or [OK] to enter.
Auto adjust
Press
or [OK] to start automatic adjustment.
Auto
adjust
This will
generally
the picture’s
location on the screen, clock and phase
Press
or [OK]
to startadjust
automatic
adjustment.
according
to
the
signal
output
from
the
certain
This will generally adjust the picture’s locationPC
onyou
theconnected.
screen, clockUnder
and phase
according to
circumstances,
auto
adjustment
may
not
work.
If
this
happens,
you
adjust
the
the signal output from the PC you connected. Under certain circumstances,can
auto
adjustment
position,
clock
and
phase
manually.
may not work. If this happens, you can adjust the position, clock and phase manually.
H-Offset / V- Offset
Press / / oror[OK]
[OK]toto
enter
sub-menu,
press
/ adjust
to adjust
the horizontal
or
Press
enter
thethe
sub-menu,
thenthen
press
/ to
the horizontal
or vertical
vertical
position
of
the
picture.
position of the picture.
Size
Size
Press / or [OK] to enter the sub-menu, then press / to adjust the display size.
Press / or [OK] to enter the sub-menu, then press / to adjust the display size.
Phase
Phase
Press / or [OK] to enter the sub-menu, then press / to adjust the phase of the
Press / or [OK] to enter the sub-menu, then press / to adjust the phase of the
picture.
Position
reset
Position
reset
Press
/
restore
thethe
factory
default
settings.
Press / oror[OK]
[OK]toto
restore
factory
default
settings.
NOTE:
Y
ou
may
need
to consult
youryour
computer’s
instruction
manualmanual
for instructions
how to
NOTE:
You
may
need
to consult
computer’s
instruction
for instructions
enable
video
output
on
your
computer.
how to enable video output on your computer.
34
34
Media
(USB) Mode
34
Media (USB) Mode
Media
Mode
Plug in a USB(USB)
device (with
FAT32 format), then press [SOURCE] to set the input
source
Media.
Plug in to
a USB
device (with FAT32 format), then press [SOURCE] to set the input
Plug
in a to
USB
device
(with
FAT32informat),
then press
[SOURCE]
to set the
input
to Media.
/ Media.
to
select
Media
the source
menu,
then press
[OK]
or source
to enter.
Press
source
Press
Media
in the
menu, menu,
then press
[OK]
or [OK]
to enter.
Press // / totoselect
select
Media
insource
the source
then
press
or to enter.
Press
Press // to select the sub-menu (Photo, Music, Movie or Text) and press [OK] or to enter.
This TV supports the following media formats:
ThisTVTVsupports
supports
the
formats:
Photo:
PNG /the
JPEG
/following
BMPmediamedia
Text:
TXT
This
following
formats:
Music:
WMA
MP3
Movie:
AVI
Photo: PNG
PNG
/ /JPEG
/ BMP
Text:
TXT/ DAT / MP4 / MPG
Photo:
/ JPEG
/ BMP
Text:
TXT
Music: WMA
WMA/ MP3
/ MP3
Movie:
AVI/ /DAT
DAT
/ MP4
/ MPG
Music:
Movie:
AVI
/ MP4
/ MPG
Media - Photo
Media
- Photo
Media
- Photo
Press / to select Photo, then press
Select Return (with the / buttons)
to
return
to (with
the
previous
menu,
or
buttons)
Select
Return
(with
Select
Return
/ the
the /buttons)
to
return
to
previous
menu, or
selector
C to
select
C the
totoenter.
to
return
the previous
menu,
enter. C to enter.
select
Press /
Press [OK] to start a slide show. To
Press [OK] to start a slide show. The delete
Press [OK] to start a slide show. To
the selected file, press the RED button, then
button,
select
or press
[OK].
select Yesthen
or press
[OK].Yes
To show
the function
To
show
the
function
panel
on
the
button,
then
select
Yes
or
press
[OK].
panel on the bottom of the screen press
bottom
of
the
screen,
press
[DISPLAY],
To
show
the
function
panel
on
the
[DISPLAY], then press / to select the
then
press
/ and
to select
the
desired
bottom
of the
screen,
press
[DISPLAY],
desired
unction
[OK] to
confirm
your
selection.
Press/ [EXIT]
to return
the main
then
press
to select
thetodesired
menu. Alternatively,
use the
selection.
Press [EXIT]
to corresponding
return to
buttons
onmenu.
the remote
control
to select
the
the
main
Alternatively,
use
selection.
Press
[EXIT]
to return
to the
desired
function.
corresponding
on theuse
remote
the
main
menu.buttons
Alternatively,
the
control to selectbuttons
the desired
function.
corresponding
on the
remote
control to select the desired function.
[OK]
Press
to
Photo,
thenthen
presspress
[OK] to
Pressto/ /enter.
toselect
select
Photo,
enter.
[OK] to enter.
Press / to select the file you want to view
Press /
in the file selection menu. When highlighting
When
highlighting
thefileoption
you will
the option
you select, the
information
When
highlighting
the
option
yoube
appear on the right and the picture can
on
the
right
and
the
picture
can
be
previewed in the centre.
previewed
thethe
centre.
on
the rightinand
picture can be
previewed in the centre.
Media (USB)
(USB) Mode
Mode (Cont.)
(Cont.)
Media
Media
(USB)
35
35
35
Media
- Music
Media
- Music
Media - Music
Press / to select Music, then press
Press
/ to
thenthen
presspress
[OK] to
Press
toselect
selectMusic,
Music,
[OK] to/enter.
enter.
[OK] to enter.
Press // to select the file you want to listen
Press
Press
to When
listen/ highlighting
to. When highlighting
to.
the option youthe
select,
to
listen
to.
When
highlighting
the
the file information will appear on the
right
will the
appear
right automatically.
and the song
and
song on
will the
be played
will
on automatically.
the right and the song
will appear
be played
will be played automatically.
To show the function panel on the bottom of the screen, press [DISPLAY], then
To
show
function
panel
on the
of the screen,
[DISPLAY],
then Press then
/ to select
To
show/the
the
function
panel
onbottom
the bottom
of thepress
screen,
press [DISPLAY],
press
the
desired
function
and
[OK]
to
confirm
your
selection.
Press
[EXIT]
to
return
to
the
main
menu.
press
/ return to the main menu. Alternatively, use the corresponding buttons
[EXIT] to
on
Alternatively,
use the corresponding buttons on the remote control to select the desired function.
[EXIT]
to return
to the
main menu.
Alternatively,
the remote
control
to select
the desired
function.use the corresponding buttons on
the remote control to select the desired function.
36
36
36
Media
Media (USB)
(USB) Mode
Mode (Cont.)
(Cont.)
Media
(USB)
Mode
(Cont.)
Media - Movie
Media -- Movie
Movie
Media
Press // to
toselect
select
Movie,
toPress
enter.
Press [DISPLAY]
show panel
the on
Press
Movie,
thenthen
presspress
[OK] to[OK]
enter.
[DISPLAY]
to show theto
function
Press / to select Movie, then press [OK] to enter. Press [DISPLAY] to show the
the
bottompanel
of the on
screen.
basic operations
withinThe
the movie
are thewithin
same asthe
for those
in
function
theThe
bottom
of the screen.
basic menu
operations
movie
function
panel(previous
on the bottom of the screen. The basic operations within the movie
the
Music
menu
aremenu
the same as page).
for those in the Music menu (previous page).
menu are the same as for those in the Music menu (previous page).
Media - Text
Media -- Text
Text
Media
Press / to select Text, then press
Press // to
toselect
select
Text,
then
Press
Text,
then
presspress
[OK] to
[OK] to enter.
enter.
[OK] to enter.
Press /
Press
Press // to select the file you want view in
the file selection menu. When highlighting
highlighting
the option
you
select,
the option you select,
the fileyou
information
highlighting
the option
select,
will appear on the right and the file can be
previewed in the centre. Press [OK] to start
the
centre.
Press
[OK]
to start viewing
viewing
the text
in full
screen.
the centre. Press [OK] to start viewing
the text in full screen.
the text in full screen.
Built-in
Player
Operations
Built-in
DVD
Player
Operations
DVDDVD
Player
Operations
Built-in
Built-in
DVD
Player
Operations
Built-in DVD Player Operations
37 3737
37 37
Some
points
about discs
SomeSome
points
about
points
about discs
discs
Some
points
about
discs
Some
points
about
discs
The
following
types
of
disc
be
played
this unit.
The following types
ofcan
disc
can
beon
played
on this unit:
The following types of disc can be played on this unit:
The following
types
disc
be played
this unit:
The following
types of
disc of
can
becan
played
on thison
unit:
DVD
DVD
DVD DVD
CD
CD
CD
CD
Region number
RegionRegion
number
number
Region
number
Region
number
The
region
number
(Regional
Restriction
Code)
isthis
built
into this unit.
(Regional
Restriction
Code)
is built
built
into
this
unit.
The region
number
The
region
number
(Regional
Restriction
Code) is
into
unit.
The
region
number
(Regional
Restriction
Code)
is
built
into
this unit.
This
unit
can
play
region
number
4
DVD
video
discs.
The
region
number
Restriction
Code)
is built into this
unit.
This
unit
can
play
number
4 DVD
discs.
This
unit
canregion
play (Regional
region
number
4 DVDvideo
video
discs.
This
unit
can
play
region
number
4
DVD
video
discs.
This unit can play region number 4 DVD video discs.
DVD
video discs
DVD video
discs
DVD
video
discs
DVD
video
discsare divided into titles, and the titles are subdivided into chapters.
DVD
video
discs
DVD
video
DVD video
divided
intointo
titles,
titlesare
aresubdivided
subdivided
chapters.
DVDdiscs
video are
discsdiscs
are divided
titles,and
andthe
the titles
intointo
chapters.
DVDdiscs
videoare
discs
are divided
intoand
titles,
theare
titles
are subdivided
into chapters.
DVD video
divided
into titles,
theand
titles
subdivided
into chapters.
You may find the following markings on DVD video discs; they are explained below:
Multiple languages
Multiple languages
Multiple
languages
Multiple
languages
Multi-language
Multi-language
Multi-language
subtitles
Multi-language
subtitles
subtitles
subtitles
Multi-angle
Multi-angle
Multi-angle
Multi-angle
Multi-aspect
Multi-aspect
Multi-aspect
Multi-aspect
Region number
Region number
number
RegionRegion
number
Closed captions
Closed captions
captions
ClosedClosed
captions
Audio
CDCD
Discs
Audio
discs
Audio CD
discs
Audio
CD
discs
are divided into tracks:
Audio
CD
discs
Audio
CD
discs
areinto
divided
into tracks:
are discs
divided
tracks:
Audio CDAudio
discs CD
Audio
CDare
discs
are divided
into tracks:
Audio CD
discs
divided
into tracks:
38
Built-in DVD Player Operations (Cont.)
CAUTION
•
Only the types of disc mentioned on the previous page can be played on this unit;
•
DVD-ROM, CD-ROM, CVD, VCD ETC. Cannot be played back
•
A DVD-RW(video mode) can generally be played back, but not necessarily all DVDs of this
type: playback capability depends on the recording conditions.
•
A DVD-RW (VR mode) cannot be played back.
•
A DVD+R/+RW can generally be played back, but not necessarily all DVDs of this type:
playback capability depends on recording conditions.
•
A DVD-R that has recorded movie data can generally be played back by the unit, but not
necessarily all DVDs of this type: playback capability depends on recording conditions.
•
A DVD –R without recorded movie data cannot be played back
Handling, storing and cleaning Discs
•
Do not touch the door to the disc compartment while disc is moving
•
Never put anything except a 12cm DVD (or cd) into the disc slot. Foreign objects can damage
the unit.
•
Carefully wipe any fingerprints and dust from the signal surface of the disc(glossy side)with a
soft cloth. Wipe straight from the centre to the outside of the disc.
•
Never use chemical cleaning spray, liquids or solvents to clean discs. These chemicals will
permanently damage the plastic surface of the disc.
•
To remove a disc from its storage case, press down on the centre of the case and lift the disc
out, holding it carefully by the edges.
•
return any discs to their cases after use to protect them from dust and scratches.
•
To prevent warping the disc, do not expose it to direct sunlight, high humidity or high
temperature for extended periods of time.
•
Do not apply paper labels or write anything on either side of the disc. Sharp writing
instruments, or the ink used in some felt-pens, may damage the surfaces of the disc
DVD set-up
Once you have made your initial settings, you can always operate the unit under the same
conditions. The settings will be retained in the memory until they are changed, even if the power is
turned off.
•
Press [DVD SETUP] to activate the DVD player OSD menu
•
Press / to highlight and move between different sub-menus, the press to enter submenu
•
Press / to move the highlight to the item you wish to select, then press to enter.
•
Press / for adjustment
•
press[DVD SETUP] to exit OSD menu
Built-in
Built-in DVD
DVD Player
PlayerOperations
Operations
39
39
Language
Setup
Language
Setup
OSD:
Set
OSD
language.
OSD:
Setthe
the
OSD
language.
Menu:
Select
the
disc
menu
language.
Menu:
Select the disc menu
language.
Audio:
Select
the
audio
language.
Audio:
Select the audio language.
Subtitle:
Select
subtitle
language.
Subtitle:
Selectthe
the
subtitle
language.
Screen
Setup
Screen
Setup
TV
Type:
Set
TVTV
display
mode.
TV Type:
Setthe
the
display
mode.
Screen
Saver:
Set
the
screen
saver.
Screen Saver:
Set the screen saver.
TV
Select
PAL or AUDIO.
TVSystem:
System:
SelectNTSC,
NTSC,PALor
AUTO .
Brightness:
Adjust
the
picture
brightness.
Brightness:
Adjust the picture
brightness.
Contrast:
Adjust the picture contrast.
Contrast:
Adjust the picture contrast.
Last Memory:Back to the position of your last
Last Memory : Back to the position of your
watching.
last watching.
Audio
Setup
Audio
Setup
Downmix:
Downmix:
Setthe
the
downmix
mode.
Set
downmix
mode.
Custom
Setup
Custom
Setup
Parental
Control:
Parental Ctrl:
Password:
Password:
Style:
Style:
Default:
Set
control.
Setthe
theparental
parental
control.
Change
the
password.
Change the password.
Change
background
colour
of OSD.
Changethe
the
background
colour
of OSD.
Load the factory setting.
Default:
Load the factory setting.
Exit Setup Mode
Exit Setup Mode
Press the OK button to Exit Setup Mode.
Press the OK button to Exit Setup Mode
Built-in DVD Player Operations
40
Basic playback functions
Built-in DVD Player Operations
If this symbol
appears on the TV screen during operation, the function you are
trying to access is currently not available on the disc.
Basic playback functions
1. Turn on the TV and press [SOURCE] to select the input source as DVD.
If this symbol appears on the TV screen during operation, the function you are trying to access is
2.currently
Insert not
theavailable
disc (label
facing
on the
disc. away from you) into the disc slot (side panel) until it
1. Turn on the TV and press [SOURCE] to select the input source as DVD.
2.NOTE:
InsertRegardless
the disc (label
away from
the disc slot
(side
panel)
untila itplayable
clicks. The TV
offacing
the mode
you you)
haveinto
selected,
when
you
insert
will start playing the first file/track/chapter automatically.
disc into the disc slot, the TV will switch to DVD mode and start playback
automatically.
NOTE: R
egardless of the mode you have selected, when you insert a playable disc into the
3. To temporarily
stop
of atoCD,
to start
stopplayback
playback,
press it again to
disc slot,
the playback
TV will switch
DVDpress
mode and
automatically.
resume playback.
a DVD,
to stop
playback,
it
3.To temporarily
To temporarilystop
stop playback
playback ofof
a CD,
presspress
to stoponce
playback,
press
it again topress
resume
twice
to
stop
playback
completely.
playback. To temporarily stop playback of a DVD, press once to stop playback, press it twice
to stop playback completely.
Selecting a DVD menu
Selecting a DVD menu
NOTES
NOTES: The operation may differ depending on the disc used.
Selecting a menu may not be possible on some discs.
Selecting a menu may not be possible on some discs.
1. Press [DVD MENU] during playback, the main menu screen will appear.
1. Press [DVD MENU] during playback, the main menu screen will appear.
2.2. Press
buttons)
to select
the desired
Press // // / / (or
(orthe
the number
number buttons)
to select
the desired
menu. menu.
3.3. Press
[OK]
and
the
selected
menu
playback
starts.
Press [OK] and the selected menu playback starts.
Chapter
(track)skip
skip
Chapter (track)
Skipping
forward
Skipping forward
Press
playback
to skip
tonext
the chapter
next chapter
(or track).
Press during
during playback
to skip
to the
(or track).
Skipping backward
Skipping backward
Press during playback to skip back to the previous chapter (or track).
Press during playback to skip back to the previous chapter (or track).
NOTE:
Youcan
canskip
skip
only
through
the chapters,
the
the DVD disc.
NOTE: You
only
through
the chapters,
not overnot
theover
title on
thetitle
DVDon
disc.
41
Built-in DVD Player Operations
41
Built-in
DVD Player Operations
Title search [DVD]
Press [GOTO], then press the number buttons to enter the desired title number.
Title search [DVD]
Repeat playback
Press [GOTO], then press the number buttons to enter the desired title number.
Press [REPEAT] during playback to activate repeat mode:
Repeat
CD
DVD playback
Press
[REPEAT]
to activate repeat
If you want to ...
If you
wantduring
to ...playback
Press [REPEAT]
... mode:
Repeat current track
Repeat chapter Once
DVD
CD
( CHAPTER)
Repeat all tracks
IfRepeat
you want
to...
Press
[REPEAT]...
Twice
title
If you want to...
( TITLE)
Repeat
chapter
Once
Repeat current track
Three times
all
( Repeat
CHAPTER)
Repeat all tracks
( ALL)
Repeat title
Twice
Repeat off
Four times
(
TITLE)
Repeat all (
Repeat off
ALL)
Press [REPEAT] ...
Once
Twice
Three
times
Press
[REPEAT]...
Once
Twice
Three Times
Three Times
Four Times
A-B repeat (designated range repeat playback)
A-B Repeat (Designated rang repeat playback)
1. Press [A-B] during playback at the beginning of the section you want to repeat
(Point
A).during
“ A” playback
appearsaton
the
TV screen.
Press
[A-B]
the
beginning
of the section you want to repeat (Point A). “
A”
on the
TV screen.
2. appears
Press [A-B]
again
at the end of the section you want to repeat (Point B).
2. Press
[A-B] again at the end of the section you want to repeat (Point B). “ AB” appears briefly
“
TV screen.
3. on
To the
return
to normal playback, press [A-B] again.
1.
3.
To return to normal playback, press [A-B] again.
IMPORTANT NOTE
IMPORTANT NOTE
The
DVD
default
password
is “0000”
—need
you this
willpassword
need this
to enterlock
the
•
The
DVD
default
password
is “0000”—
you will
topassword
enter the password
password
menu,
so that
can set your own password.
menu,
so thatlock
you can
set your
ownyou
password.
you
forget
password
youset,
have
have
tomaster
enter password:“8888”.
the master
•
IfIfyou
forget
the the
password
you have
you set,
haveyou
to enter
the
This
will
clear the password
setwill
andclear
reset itthe
back
to the default
then you
can reset
password:
“8888”.you
This
password
youpassword,
set and reset
it back
to the
your
password
again. then you can reset your password again.
default
password,
42
42
Built-in DVD Player Operations
Built-in DVD Player Operations
Subtitle language [DVD]
If the DVD
you are
watching has subtitles, press [SUBTITLE] repeatedly during
Subtitle
language
[DVD]
until
desired
appears
on theduring
TV screen.
Example:
If playback
the DVD you
are the
watching
hassubtitle
subtitles,language
press [SUBTITLE]
repeatedly
playback
until the
SUBTITLE
01/03
ENG appears on the TV screen. Example: SUBTITLE 01/03 ENG
desired
subtitle
language
NOTE:
NotNot
all discs
support
this function.
NOTE:
all discs
support
this function.
Audio
soundtrack
language
Audio
sound
track language
(multi(multilanguage)
language) [DVD] [DVD]
This
function
works
only
with
discs
that
have multiple
audio
languages
This function works only with discs that have
multiple
audio sound
tracksoundtrack
languages recorded.
recorded.
Press [AUDIO] repeatedly during playback until the desired language appears on the TV screen.
Press [AUDIO] repeatedly during playback until the desired language appears on
the TV screen.
NOTES:
• NOTES:
When the desired language is not selected, even though the button is pressed, the language
is notthe
available
on the
disc.
When
desired
language
is not selected, even though the button is pressed, the
• language
If the language
is
not
recorded
on the
disc, only the available language on the disc will be
is not available on the
disc.
heard.
If the language is not recorded on the disc, only the available language on the disc
• will
When
you turn off the power or change the disc, you have to select the language again.
be heard.
On-screen
again. information
Press [DISPLAY] repeatedly to show the disc information available (Title, Chapter, Title elapsed
playing
time, Language,
etc.).
On-screen
information
Press [DISPLAY] repeatedly to show the disc information available (Title, Chapter,
Picture/JPEG CD playback
Title elapsed playing time, Language, etc.).
To start a slide show from the thumbnail pictures:
1.Picture/JPEG
Press / / /CDtoplayback
select the desired picture.
To go to the next or previous thumbnail pictures, press or .
To start a slide show from the thumbnail pictures:
2. Press [OK] or (Play) to start the slide show from the selected picture.
1. Press
/ slide
/ / show:
to select the desired picture.
During the
To•goPress
to thetonext
orPress
previous
thumbnail
pictures, press or .
pause.
(Play)
to continue.
2. Press
[OK] oror/ (Play)
the or
slide
showfile
from the selected picture.
• Press
to skiptotostart
the next
previous
During
the
slide appears
show: upside down or sideways press / / / to flip / rotate the
• If the
picture
to pause. Press (Play) to continue.
picture.
or
the picture.
/ / /
43
Specifications
MODEL
GVA26LEDCP
Panel System
26” (66cm) HD LED LCD panel
Display Resolution
1366 x 768
Television System
HD DVB-T, PAL DK/BG/I,SECAM DK/BG
Inputs/Outputs
ATV/DTV (RF 75Ω)
1
CVBS input/audio (L/R)
1
HDMI input
3
YPbPr input
1
VGA input
1
PC audio input
1
USB input
1
Storage
Multimedia format support
MOVIE
MPEG2
AVI, MP4, DIVX4, DIVX5,
XVID (max. resolution
720×576 pixel, max.
baud rate 6Mbps)
MPEG 1/2
MPG, MPEG, VOB, DAT, TS
(max. baud rate 9.8Mbps)
PHOTO
BMP, JPG,
PNG
BMP, JPG
(max. resolution 3000 x
3000 pixel)
PNG
(max. resolution 1000 x
1000 pixel)
MUSIC
MP3
32K - 320K
SPDIF output
1 (Coaxial)
Audio output
1
OSD Language
English, German, French, Italian, Spanish, Portuguese
Speaker Power
2 x 10W
Power Supply
100-240 VAC, 50/60Hz
Power Consumption
<60W
Power standby
<0.5W
Universal remote control
NEC 0172
Dimensions (Wx H x D,mm)
658 x 489 x 205 (with stand)
658 x 429 x 54.5 (without stand)
Weight (net) - TV only
7.3kg
44
FAQs
Problem
Action
The screen does not appear / 1. Check that the power is on.
illuminate.
2. Check that you have not pressed the BLUE
button and switched OFF power to the
screen.
The screen appears too
slowly after the power is
turned on.
This problem occurs only briefly in the process of
image elimination processing, which is necessary
for hiding temporary screen noise that occurs
when the power is turned on. If the screen
does not turn on after one minute, contact our
customer after sales support line.
The screen is too bright or too
dark.
Check the brightness and / or contrast
adjustments.
The screen is too large or too
small.
Adjust the screen size by selecting the zoom button.
Stripes appear on the
screen and it shakes.
Stop using wireless telephones, hair dryers or
other electrical appliances near the TV.
Access to the programs is
blocked.
Check that you have not changed the access code
or password. To reset, please enter the following
master password “4711”.
The screen appears, but
there is no sound.
1. Press the MUTE button.
2. Increase the sound level by pressing the
volume adjustment button.
3. Check that the sound terminal of your
external input is connected properly.
4. Check that the audio cables are connected
properly.
5. Select and check any other input. If the sound
still does not work and the other channels are
the same after you have checked the above
points, contact the after sales support line.
The remote control does
not work.
1. Check if the main power is switched on.
2. Check that the batteries of the remote control
are loaded properly.
3. Check for any obstacles between the LED LCD
TV and the remote control and remove them,
if necessary.
4. If the batteries have no power, replace them
with two new batteries of the same type.
45
Notes
46
Notes
47
Notes
Download PDF