Before using your air conditioner, please read
this manual carefully and keep it for future reference.
FLOOR-STANDING SPLIT TYPE
ROOM AIR CONDITIONER
R ead This Manual
Inside you will find many helpful hints on how
to use and maintain your air conditioner properly.
Just a little preventative care on your part can
save you a great deal of time and money over
the life of your air conditioner. You'll find many
answers to common problems in the chart of
troubleshooting tips. If you review the chart of
Troubleshooting Tips first, you may not need
to call for service.
CONTENTS
SOCIABLE REMARK
Sociable remark...............................................................................................................................2
SAFETY PRECAUTIONS
Warning ..........................................................................................................................................3
Caution .......................................................................................................................................4
Prior to operation ......................................................................................................................5
OPERATING INSTRUCTIONS
Product overview ........ ...................................................................................................................6
Unit control panel ............................................................................................................................7
Airflow direction control .................................................................................................................10
Operation tips ................................................................................................................................11
CARE AND MAINTENANCE
Cleaning the indoor unit ...............................................................................................................12
Cleaning the air outlet ..................................................................................................................12
Cleaning the lower front panel and air filter .................................................................................13
TROUBLESHOOTING TIPS
Troubleshooting tips ......................................................................................................................14
CAUTION
Contact an authorised service technician for repair or maintenance of this unit.
Contact the installer for installation of this unit.
The air conditioner is not intended for use by young children or invalids without supervision.
Young children should be supervised to ensure that they do not play with the air conditioner.
If the power cord is to be replaced, replacement work shall be performed by authorised
personnel only.
Installation work must be performed in accordance with the national wiring standards by
authorised personnel only.
1
SOCIABLE REMARK
When using this unit in the European countries, the following
informations must be followed:
DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection
of such waste separately for special treatment is necessary.
It is prohibited to dispose of this appliance in domestic household waste.
For disposal, there are several possibilities:
A) The municipality has established collection systems, where electronic waste can
be disposed of at least free of charge to the user.
B) When buying a new product, the retailer will take back the old product at least
free of charge.
C) The manufacture will take back the old appliance for disposal at least free of
charge to the user.
D) As old products contain valuable resources, they can be sold to scrap metal
dealers.
Wild disposal of waste in forests and landscapes endangers your health when
hazardous substances leak into the ground-water and find their way into the food
chain.
2
SAFETY PRECAUTIONS
To prevent injury to the user or other people and property damage, the following instructions must be
followed. Incorrect operation due to ignoring of instructions may cause harm or damage. The
seriousness is classified by the following indications.
WARNING
This symbol indicates the possibility of death or serious injury.
CAUTION
This symbol indicates the possibility of injury or damage to property.
Meanings of symbols used in this manual are as shown below.
Never do this.
!
Always do this.
WARNING
Connect with the power
properly.
Do not operate or stop the
unit by switching on or off
the power.
Do not damage or use an
unspecified power cord.
Otherwise, it may cause electric
shock or fire due to excess heat
generation.
It may cause electric shock or fire
due to heat generation.
It may cause electric shock or fire.
Do not modify power cord
length or share the outlet
with other appliances
Do not operate with wet
hands or in damp
environment.
Do not direct airflow at
room occupants only.
It may cause electric shock or
fire due to heat generation.
It may cause electric shock.
This could damage your health.
Always ensure effective
grounding.
Do not allow water to run
into electric parts.
No grounding may cause electric
shock.
It may cause failure of machine
or electric shock.
Disconnect the power if
strange sounds, smell, or
smoke comes from it.
Do not drink water drained
from air conditioner.
It may cause fire and electric
shock.
It contains contaminants and
could make you sick.
Use the correctly rated
breaker or fuse.
Do not use the power cord
close to heating appliances.
There is risk of fire or electric
shock.
It may cause fire and electric
shock.
Ventilate room before operating air
conditioner if there is a gas leakage from
another appliance.
Always install circuit
breaker and a dedicated
power circuit.
No installation may cause fire
and electric shock.
Do not open the unit
during operation.
It may cause electric shock.
Do not use the power cord near
flammable gas or combustibles, such
as gasoline, benzene, thinner, etc.
It may cause an explosion or fire.
Do not disassemble or modify unit.
It may cause explosion, fire and, burns.
It may cause failure and electric shock.
3
SAFETY PRECAUTIONS
CAUTION
When the air filter is to be
removed, do not touch the
metal parts of the unit.
It may cause an injury.
Do not clean the air
conditioner with water.
Water may enter the unit and
degrade the insulation. It may
cause an electric shock.
When the unit is to be
cleaned, switch off, and turn
off the circuit breaker.
Do not put a pet or house
plant where it will be
exposed to direct air flow.
Do not clean unit when
power is on as it may cause
fire and electric shock, it may
cause an injury.
This could injure the pet or
plant.
Stop operation and close the
window in storm or hurricane.
Operation with windows
opened may cause wetting
of indoor and soaking of
household furniture.
Do not use strong detergent
such as wax or thinner. Use
a soft cloth for cleaning.
Appearance may be
deteriorated due to change
of product color or
scratching of its surface.
Do not place obstacles
around air-inlets or inside
of air-outlet.
It may cause failure of
appliance or accident.
Ensure that the installation bracket of
the outdoor appliance is not damaged
due to prolonged exposure.
If bracket is damaged, there
is concern of damage due to
falling of unit.
Do not place heavy object on the
power cord and take care of it so that
the cord is not compressed.
Use caution when unpacking
and installing. Sharp edges
could cause injury.
Do not opera te yo ur a ir
condition er in a w et ro om such
as a bathroom or laun dry room .
Chil dren sho uld be supervise d
to ensur e tha t the y do not play
with the appl iance.
This appliance can be used by
childre n aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance in
a safe way and understa nd the
hazards involved. Children shall
not pla y with the appliance.
Cleaning and user maintenance
shall not be made by children
withou t supervision.
This appliance is not intended for
use by persons (including
children) with reduced physical,
sensory or mental capabilities,
or lack of e xperience and
knowledge , unless they have
been give n supervision or
instruction concerning use of the
appliance by a person respo nsible
for their safety.
4
Ventilate the room well
when used together
with a stove, etc.
An oxygen shortage
may occur.
Do not use for
special purposes.
Do not use this air conditioner to preserve precision devices, food, pets,
plants, and art objects.
It may cause deterioration
of quality, etc.
Turn off the main power
switch when not using
the unit for a long time.
It may cause failure of
product or fire.
Always insert the filters
securely. Clean filter
once every two weeks.
Operation without filters
may cause failure.
If water enters the unit,
turn the unit off and
disconnect the power ,
contact a qualified
service technician.
There is danger of fire or
electric shock.
If the supply cord is
damaged, it must be
replaced by the
manufacturer, its service
agent or similarly qualified
persons in order to avoid
a hazard.
SAFETY PRECAUTIONS
Prior to operation
1. Contact an installation specialist for installation.
2. Make sure the unit is grounded efficiently.
3. Do not use a damaged or non-standard power cord.
4. Do not share the same outlet with other appliances.
5. Do not use an extension cord.
6. Do not start/stop operation by shutting off the power supply.
Usage
1. Exposure to direct airflow for an extended period of time could be hazardous to your health.
Do not expose occupants, pets, or plants to direct airflow for extended periods of time.
2. Due to the possibility of oxygen deficiency, ventilate the room when used together with
stoves or other heating devices.
3. Do not use this air conditioner for non-specified special purposes (e.g.Preserving precision
devices, food, pets, plants, and art objects). Usage in such a manner could harm such property.
Cleaning and maintenance
1. Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling
sharp metal edges.
2. Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation,
leading to possible electric shock.
3. When cleaning the unit, first make sure that the power and circuit breaker are turned off.
service
For repair and maintenance, contact your authorised service dealer.
Operating temperature
Mode
Temperature
Room temperature
Cooling operation
Heating operation
。
17 C~32 oC/62o F~90oF
。
。
0 C ~30 C/32 oF~86oF
Drying operation
17oC~32 oC/62oF~90oF
。
。
o
o
0 C~50 C/32 F ~122 F
Outdoor temperature
。
。
o
o
。
。
-15 C~ 24 C/5oF~76 oF 0 C~50 C/32 F~122 F
o
o
o
o
(-15 C~50 C/5 F ~122 F :
For the models with low
temperature cooling system)
CAUTION:
1. If air conditioner is used outside of the above conditions, certain safety protection features may
come into operation and cause the unit to function abnormally.
2. Room relative humidity less than 80%. If the air conditioner operates in excess of this figure, the
surface of the air conditioner may attract condensation. Please set the vertical air flow louver to its
maximum angle (vertically to the floor), and set HIGH fan mode.
3. Optimum performance will be achieved within these operating temperature.
5
OPERATING INSTRUCTIONS
Product Overview
Indoor unit
Outdoo r unit
1
Air outlet
2
Op eration p anel
8
Connection cable
3
Horizontal a irflow control louver
9
Connection pipe
4
Ve rtical airflow control louver
10 Cut-off valve
5
Fr ont panel (upper an d lower)
11 Fan hoo d
6
Air inlet
7 Drain pipe
3
4
1
1
2
TES T RUN
LOCK
ON/OFF
MOD E
FAN SPE ED
AD JUST
A SSITAN T
F UNCT ION
8
5
9
11
10
6
7
NOTE
All the pictures in this manual are for explanation purpose only.
They may be slightly different from the air conditioner you
purchased(depend on model). The actual shape shall prevail.
N OTE: This manua l does not include Remote Controller Operatio ns, see the
<<Remote Controll er Instruc tion>> packed with the unit for details.
6
OPERATING INSTRUCTIONS
Unit Control Panel
Room Temp/Set Temp
/Set Timer displa y
TEST RUN
TIMER ON TIMER OFF
LOCK
ON/OFF
MODE
1
FAN SPEED
2
3
ADJUST
4
Indicat ors
AUXILIARY
FUNCTION
5
Sw ing opera tion displa y
Auto operation display
Sle ep operat ion displa y
Cooling operation disp lay
Tur bo operation displa y
Dry operatio n display
Heating ope ration display
T IMER O N
On timer o peration display
TIMER OFF
Off timer o peration display
Lo ck operat ion display
Fa n operatio n display
Fa n speed d isplay
Ope ration bu ttons
1
ON/OFF button: Operation starts when this button is pressed and stops when you
press the button again.
2
MODE button: Press this button to select the appropriate operating mode. Each time the
button is pressed, the operation mode is shifted in the direction of the arrow:
AUTO COOL DRY HEAT(for cooling & heating models only)
FAN ONLY
Mode indicators illuminates under the different mode settings.
Auto: Automatically choose the operation mode by sensing the difference between
the actual ambient room temperature and the set temperature on the remote controller.
The fan speed is automatically controlled.
Cool: Enables you to enjoy the cooling effect at you preferred setting temperature
O
O
(Temperature range:17 C~30 C).
Dry: Enables you to set the desired temperature at low fan speed which provides you
O
O
with the dehumidifying surroundings (Temperature range:17 C~30 C). In Dry mode,
you can not select Fan speed.
Heat: Permits heating operation(For cooling & heating models only)
O
O
(Temperature setting range:17 C~30 C)
Fan only: Permits fan operation without cooling or heating. In this case, however,
the setting temperature is not displayed and you can not adjust the set temperature.
7
OPERATING INSTRUCTIONS
3
1
2
3
4
5
TIMER ON
TIMER OFF
TIMER OFF
TIMER ON
8
OPERATING INSTRUCTIONS
Once the desired feature is established, press the AUXILIARTY FUNCTION button again to
register .
NOTE: The above illustration is for explanation purpose only. The features are different
depending on models.
Relative indicator lights up under the different mode settings:
Left/Right airflow: Enables you to set the desired horizontal airflow direction.
Sleep operation: Choose this feature to go into the energy-saving operation. It is only available
on Cool, Heat or Auto mode. Under Sleep mode, the air conditioner will automatically increase
(cooling) or decrease(heating) 1OC per hour. The set temperature will be stable 2 hours later.
The fan speed is forced AUTO.
Turbo operation: When select this function in heating mode, the auxiliary electric heater(PTC)
is activated and brings faster and stronger heating.
NOTE: This function is only available for the units adopted PTC.
TIMER ON operation: Use the ON timer to turn on the air conditioner at the desired time
(between 0~24hrs). After selecting the Timer ON feature, press the " "and " " button to
select the desired time, each press will increase/decrease the Auto-timed setting in 30 minute
increments. Once the desired time is established, press the AUXILIARY FUNCTION button to
register the Auto Timer-ON program.
TIMER OFF operation: Use the OFF timer to turn off the air conditioner at the desired time
(between 0~24hrs). After selecting the Timer OFF feature, press the " " and" " button to
select the desired time, each press will increase/decrease the Auto-timed setting in 30 minute
increments. Once the desired time is established, press the AUXILIARY FUNCTION button to
register the Auto Timer-OFF program.
NOTE: To cancel the timer settings, press the AUXILIARY FUNCTION button, then use the
" " and" " buttons to select ON/OFF timer, press the AUXILIARY FUNCTION button again to
cancel.
6
TEST RUNNING button : This button is specially designed for maintenance technicians.
Press this button to perform test running operation, press it again to stop the operation.
The test running operation will last 30 minutes regardless of the setting temperature.
Press the ADJUST button to check the protective code of P4, P5, P9 and information of
T1,T2 and T3(T2B).
7
LOCK button: When you press the LOCK button the first time, all the current settings are
locked in but the remote controller operation is available. And the LOCK indicator (
)
illuminates. Push it again to cancel the LOCK mode.
9
OPERATING INSTRUCTIONS
Airflow Direction Control
Horizontal Airflow Direction(AUTO)
The Left/Right(Horizontal Airflow) can be adjusted
by using the remote control or unit control.
Press the"AUXILIARY FUNCTION" button on the
unit control panel, then press the ADJUST " "and
" " button to select the "
" feature and the
ouvers will swing left and right. Repeat the above
procedures to stop the swing operation.
Never touch the vertical louvers by hand.
Vertical Airflow Direction(MANUAL)
The Up/Down(Verticall Airflow) air flow can be
adjusted by horizontal louvers. Hold the edge
of the horizontal louver and move it up or down
to set the desired air flow direction.
Note:
● The starting angle of the horizontal louver should not be too small, otherwise the
narrow air outlet will affect cooling or heating efficiency.
● Do not set the starting angle of the louvers too small during cooling or drying operation.
Otherwise, condensation may occur on the surface of the horizontal louver and cause
dew dripping.
● During the operation, if the louvers can not swing normally, shut off the unit and unplug
for several minutes, then plug it again and restart the operation.
● The horizontal louver may slightly vibrate during the operation. This is normal.
10
OPERATING INSTRUCTIONS
Operation Tips Tips
Operation
The following events may occur during normal operation.
1. Protection of the air conditioner.
Compressor protection
The compressor can't restart for 3 minutes after it stops.
Anti-cold air (Cooling and heating models only)
The unit is designed not to blow cold air on HEAT mode, when the indoor heat exchanger is in
one of the following three situations and the set temperature has not been reached.
A) When heating has just starting.
B) Defrosting.
C) Low temperature heating.
The indoor or outdoor fan stop running when defrosting (Cooling and heating models only).
Defrosting (Cooling and heating models only)
Frost may be generated on the outdoor unit during heat cycle when outdoor temperature is low
and humidity is high resulting in lower heating efficiency of the air conditioner.
During this condition air conditioner will stop heating operation and start defrosting automatically.
The time to defrost may vary from 4 to 10 minutes according to the outdoor temperature and
the amount of frost buildup on the outdoor unit.
2. A white mist coming out from the indoor unit
A white mist may generate due to a large temperature difference between air inlet and air outlet
on COOL mode in an indoor environment that has a high relative humidity.
A white mist may generate due to moisture generated from defrosting process when the air
conditioner restarts in HEAT mode operation after defrosting.
3. Low noise of the air conditioner
You may hear a low hissing sound when the compressor is running or has just stopped running.
This sound is the sound of the refrigerant flowing or coming to a stop.
You can also hear a low "squeak" sound when the compressor is running or has just stopped
running. This is caused by heat expansion and cold contraction of the plastic parts in the unit
when the temperature is changing.
A noise may be heard due to louver restoring to its original position when power is first turned on.
4. Dust is blown out from the indoor unit.
This is a normal condition when the air conditioner has not been used for a long time or during first
use of the unit.
5. A peculiar smell comes out from the indoor unit.
This is caused by the indoor unit giving off smells permeated from building material, from furniture,
or smoke.
6. The air conditioner turns to Fan Mode from COOL or HEAT (For cooling and heating models only)
Mode.
When indoor temperature reaches the temperature setting on air conditioner, the compressor will
stop automatically, and the air conditioner turns to Health mode. The compressor will start again
when the indoor temperature rises on COOL mode or falls on HEAT mode (For cooling and heating
models only) to the set point.
7. Dripping water may generate on the surface of the indoor unit when cooling in a high
relatively humidity (relative humidity higher than 80%). Adjust the horizontal louver to
the maximum air outlet position and select HIGH fan speed.
11
CARE AND MAINTENANCE
8. Heating mode (For cooling and heating models only)
The air conditioner draws in heat from the outdoor unit and releases it via the indoor unit
during heating operation. When the outdoor temperature falls, heat drawn in by the air
conditioner decreases accordingly. At the same time, heat loading of the air conditioner
increases due to larger difference between indoor and outdoor temperature. If a
comfortable temperature can't be achieved by the air conditioner, we suggest you use a
supplementary heating device.
9. Auto-restart function
Power failure during operation will stop the unit completely.
For the unit without Auto-restart feature, when the power restores, the OPERATION indicator
on the indoor unit starts flashing. To restart the operation, push the ON/OFF button on the
remote controller. For the unit with Auto-restart feature, when the power restores, the unit
restarts automatically with all the previous settings preserved by the memory function.
10. Lightning or a car wireless telephone operating nearby may cause the unit to malfunction.
Disconnect the unit with power and then re-connect the unit with power again. Push the
ON/OFF button on the remote controller to restart operation.
Maintenance and Cleaning
CAUTION: Before performing any maintenance, turn off the main power to the system.
Cleaning the indoor unit:
Note: Turn the system off before cleaning. Supply power must be disconnected before
cleaning the indoor unit.
1. Use a dry cloth to wipe the indoor unit and remote controller.
2. A cloth dampened with cold water may be used on the indoor unit if it is very dirty.
3. Do not splash water on unit. This may cause damage to the inner parts or an electric shock.
CAUTION:
1. Do not use a chemical-treated duster for wiping or leave such material on the unit for long.
2. Do not use benzine, thinner, polishing powder, or similar solvents for cleaning.
These may cause the plastic surface to crack or deform.
Cleaning the air outlet:
After using for a period, the air outlet and louvers will become dirty. It is recommended to dip a soft
cloth into warm water or a mild kitchen cleanser, ring it out, then wipe any soiling from the unit.
After, wipe with a dry cloth.
12
CARE AND MAINTENANCE
Cleaning the Lower front panel and Air Filter:
If the air filter becomes clogged, the performance will decrease and electricity will be wasted.
The air filter should be checked and cleaned about once every 2 weeks to maintain optimal
performance of the air conditioner.
Air Filter
1. The air filter is located under the lower front panel (see figure above).
2. First take down the screw cover on both side of the panel, then remove the screws using the
screwdriver.
3. Hold both side of the panel and pull it downwards, then take it down.
4. Take hold of the air filter holder and pull it up, and then take it out.
3. The lower front panel can be wiped with water or a cloth dipped water. Wash it with water and dry it in
a cool place.
4. Use a vacuum cleaner to remove the dust or wash the air filter with water, and dry it in the shadow.
5. Installation process of the air filter and lower front panel is the reverse of the removal process.
CAUTION:
Make sure nothing has been forgotten or fallen into the fan before installing the lower front panel.
Restart the unit after the front panel and the air filter are correctly installed.
Before long time idleness
1. Clean the indoor unit and air filter.
2. Dry the inner parts by keeping the fan running for half a day.
3. Turn off the unit and switch off the power switch, remove the batteries from the remote control.
4. Periodically check and clean the inner parts of the outdoor unit. Our local dealer will help you
handle this if you contact us.
After long time idleness
Before restarting, please check if the air inlet and air outlet of the indoor and outdoor units are
blocked up. Clean it so.
Aftersales
If the air conditioner operate abnormally, turn off the unit and switch off the power supply, and
contact the local dealer or service centre.
13
TROUBLESHOOTING TIPS
Before calling for service, please review the following list of common problems and solutions.
Problem
Solutions
Possible Cause
Air conditioner
does not
operate at all
Power failure
Wait for power restoring
The power supply is disconnected.
Switch on the main power switch
The power fuse is blown.
Change the fuse
Wait or cancel timer setting
The timer is set.
Change
the batteries.
The batteries of the remote control are exhausted
Air conditioner
does not
cool or
heat well
Air conditioner
does not
cool or
heat at all
The temperature setting is too high
or too low.
Set a more comfortable temperature.
The air filter is clogged with dust
Clean the filter
The air inlet or outlet of the outdoor
unit is blocked
Clear up the block
Doors or windows are open
Close the doors or windows
The air inlet or outlet of the outdoor
unit is blocked
Clear up the block first, then begin to
operate.
Three-minute protection feature
Wait for a while
Unappropriated temperature setting
Set the temperature properly
If you still cannot solve the problem after trying the above, pull out the power plug and call the dealer.
The following displays indicate an error or problem:
Number Display code
1
2
E1
E2, E3,E4
Problems
What to do
IDU & OD U communication malfunction
Contact service people
Temperature Sensor is off or short-circuit.
Contact service people
3
E7
EEPROM malfunction
Contact service people
4
E8
Indoor DC fan moto r speed out of control
Contact service people
5
Ed
Outdodor Temp.s ensor malfunction
6
P0
Evapora tor low temperature prot ection
under CO OL and DRY mode.
7
P1
Anti-cold air or defrosting under heat mode
8
P8
Current overload protection
Contact service people
9
Ed
Outdoor protection
Turn off the unit, clean the air filter, then
restart the unit. If this operation does not
work, please contact service people.
Turn off the unit, clean the air filter, then
restart the unit. If this operation does not
work, please contact service people.
Turn off the unit, clean the air filter, then
restart the unit. If this operation does not
work, please contact service people.
When the temperature is warm enough,
the function stops automatically./The
unit will aut restart after finishing the
defrosting and the temperature of
indoor Heat Exchanger raises.
The displayed error cod e differs f rom appliance to ap pliance. The actual display o f the indoor
unit shall prevail.
14
The icon
The icon
The icon
show on the LCD of the indoor unit when the unit is in the normal operation.The three icons
imply the three function respectively.
implies the remote control function.
implies the defrosting function.
implies the forced cooling function.
CAUTION:
If the supply cord of this appliance is damaged, replacement work shall be performed by authorized
personnel only.
For the unit adopts PTC, the PTC heater is fixed in the middle of bottom of the cabinet. Do not attempt
to remove or repair the components by yourself, it may cause a fire or other danger.
15
The design and specifications are subject to change without prior notice for product
improvement. Consult with the sales agency or manufacturer for details.
QS001-BPU
202000192491
20140410
Download PDF