DX-32L151A11-37L130A11_10-0567.book Page 1 Tuesday, June 1, 2010 9:26 AM
32" and 37" LCD TVs
DX-32L151A11/DX-37L130A11
USER GUIDE
DX-32L151A11-37L130A11_10-0567.book Page ii Tuesday, June 1, 2010 9:26 AM
ii
Dynex DX-32L151A11/DX-37L130A11
32" and 37" LCD TVs
Contents
CHILD SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Installing the stand or removing the stand column . . . . . . . . . . . . . 4
Installing the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Removing the stand column . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Installing a wall-mount bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
TV components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Aiming the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Programming a universal remote control to work with your TV . . . . . . . . . .8
Making connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Selecting a location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connecting the power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connecting an HDMI device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Connecting a component video device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Connecting an antenna, cable TV, or satellite TV box . . . . . . . . . . . . . . . . . . . .9
Connecting a VCR, camcorder, or game console . . . . . . . . . . . . . . . . . . . . . . 10
Connecting a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting a home theater system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Turning on your TV for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Understanding the basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Turning your TV on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting the video input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting a channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying program information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
On-screen menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Navigating the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting basic settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
12
12
13
13
13
14
14
Adjusting the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjusting the TV picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjusting the computer image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Adjusting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Adjusting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Selecting the audio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Playing TV audio only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
DX-32L151A11-37L130A11_10-0567.book Page iii Tuesday, June 1, 2010 9:26 AM
iii
Changing channel settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Automatically scanning for channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting the signal source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hiding channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting up a favorite channel list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding or changing a channel label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking digital TV signal strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
17
17
18
18
19
Setting parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Turning parental controls on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting or changing the password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Turning the button lock on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting parental control levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
20
20
21
Using closed captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Turning closed captioning on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Selecting the closed captioning mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Customizing digital TV closed captioning styles . . . . . . . . . . . . . . . . . . . . . . . 24
Adjusting time settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Setting the date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Setting the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Adjusting menu settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Selecting the menu language and transparency . . . . . . . . . . . . . . . . . . . . . . 26
Labeling an input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Restoring default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Video and audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
One-year limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
US and Canada Markets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Mexico Market . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
DX-32L151A11-37L130A11_10-0567.book Page iv Tuesday, June 1, 2010 9:26 AM
iv
DX-32L151A11-37L130A11_10-0567.book Page 1 Tuesday, June 1, 2010 9:26 AM
DX-32L151A11/DX-37L130A11
1
f
CHILD SAFETY
It makes a difference how and where you use
your flat panel display
As you enjoy your new product, keep these
safety tips in mind
The issue
The home theater entertainment experience is a growing trend, and larger TVs are popular
purchases. However, TVs are not always supported on the proper stands or installed
according to the manufacturer’s recommendations. We and the consumer electronics
industry are committed to making home entertainment enjoyable and safe.
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers,
chests, or carts may fall over and cause injury.
Tune into safety
•
•
•
•
•
•
One size of TV stand does not fit all. Use only a TV stand
rated for the weight of your TV.
Carefully read and understand all enclosed instructions for
proper use of this product.
Don’t let children climb on or play with entertainment system
furniture and TVs.
Don’t place TVs on furniture that can easily be used as
steps, such as a crate or chest of drawers.
Remember that children can become excited while watching
a program, especially on a “larger-than-life” TV. Make sure
that you place or install the TV where it cannot be pushed,
pulled over, or knocked down.
Make sure that you route all cords and cables so that they
cannot be pulled or grabbed by curious children.
Wall mounting
If you decide to wall mount your TV, always remember:
•
One size of wall mount does not fit all. Use only a wall mount rated for the weight of your
TV and that has been recommended by this TV manufacturer, listed in this manual, or
otherwise listed by an independent laboratory as suitable for your TV.
•
Follow all instructions supplied by the TV and wall mount manufacturers.
•
If you have any doubts about your ability to safely wall mount your TV, get help from a
professional installer.
•
Make sure that the wall where you are mounting the TV is
appropriate. Some wall mounts are not designed to be mounted
to walls backed with steel studs or cinder blocks. If you are
unsure, ask a professional installer.
•
TVs can be heavy. At least two people are required for safe wall mount installation.
DX-32L151A11-37L130A11_10-0567.book Page 2 Tuesday, June 1, 2010 9:26 AM
2
DX-32L151A11/DX-37L130A11
Important safety instructions
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within your TV. This
label is located on the back of your TV.
This symbol indicates that there are
important operating and maintenance
instructions in the literature
accompanying your TV.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with
the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete
outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to S3125A
avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused
for long periods of time.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
The wall plug is the disconnecting device. The plug must remain
readily operable.
An apparatus with a three-prong, grounding-type plug is a Class I
apparatus, which needs to be grounded to prevent possible
electric shock. Make sure that you connect this Class I television
to a grounding-type, three-prong outlet.
Remote control batteries should not be exposed to excessive heat
such as sunshine, fire, or the like.
Important safety instructions
18 The apparatus should not be exposed to dripping or splashing,
and no objects filled with liquids, such as vases, should be placed
on the apparatus.
Warnings
Electric shock hazard
To reduce the risk of fire or electric shock, do not remove any cover or
expose the device to rain or moisture. No user-serviceable parts are
inside. Refer servicing to qualified service technicians.
Lightning
For added protection for your device receiver during a lightning storm,
or when it is left unattended and unused for long periods of time,
unplug it from the power outlet and disconnect any antenna or cable
system. This helps prevent property damage and personal injury from
lightning and power line surges.
Power lines
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
Handling the LCD panel
• Your TV’s screen is made of glass. Do not drop your TV or hit, jolt,
or press hard against the LCD panel. If the screen breaks, be
careful of broken glass.
• If the LCD panel is broken, make absolutely sure that you do not
touch the liquid in the panel. This may cause skin inflammation.
• If the liquid gets in your mouth, immediately gargle, rinse, and
consult with your doctor. Also, if the liquid gets in your eyes or
touches your skin, consult with your doctor after rinsing for at
least 15 minutes or longer in clean water.
Replacement parts
When replacement parts are required, make sure that the service
technician uses replacement parts specified by the manufacturer that
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, personal injury, or other
hazards.
Safety check
After completing any service or repair to this device, ask the service
technician to perform routine safety checks to determine that your TV is
in correct operating condition.
Power source
Operate your TV only from the type of power source indicated on the
marking label. If you are not sure of the type of power supplied to your
home, consult an electrician or your local power company.
Cautions
Damage requiring service
Unplug this TV from the power outlet and refer servicing to qualified
service personnel under the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If liquid has been spilled or objects have fallen into your TV.
• If your TV has been exposed to rain or water.
DX-32L151A11-37L130A11_10-0567.book Page 3 Tuesday, June 1, 2010 9:26 AM
Important safety instructions
DX-32L151A11/DX-37L130A11
• If your TV does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions because incorrect adjustment of other
controls may result in damage and will often require extensive
work by a qualified technician to restore your TV to its normal
operation.
• If your TV has been dropped or damaged in any way.
• When your TV exhibits a distinct change in performance.
Outdoor antenna grounding
If an outside antenna or cable system is connected to your TV, make sure
that the antenna or cable system is grounded to provide some
protection against voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA No. 70, provides
information with respect to correct grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of the
antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
1
2
3
4
5
7
6
1
Antenna lead-in wire
2
Grounding clamp
3
Antenna discharge unit
4
Grounding conductors
5
Ground clamps
6
Power service grounding electrode
system
7
Electric service equipment
Note to CATV system installer
Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides
guidance for correct grounding. Specifically, it states that the cable
ground must be connected to the grounding system of the building as
close to the point of cable entry as practical.
Condensation
Moisture will form on the TV if the TV is brought from cool surroundings
into a warm room or if the temperature of the room rises suddenly.
When this happens, the TV's performance may be impaired. To prevent
this, let the TV stand in its new surroundings for about an hour before
switching it on, or make sure that the room temperature rises gradually.
Condensation may also form during the summer if the TV is exposed to
the breeze from an air conditioner. In such cases, change the location of
the TV.
Mobile telephone warning
To avoid interference with your TV picture and sound, operating
problems, or even damage, keep your cordless and cellular telephones
away from the TV.
3
End of life directives
Your TV contains tin-lead solder and a fluorescent lamp containing a
small amount of mercury. Disposal of these materials may be regulated
for environmental reasons. Your TV also contains material that can be
recycled and reused. For disposal or recycling information, contact your
local authorities or the Electronic Industries Alliance at www.eia.org to
find a recycler in your area.
Non-active pixels
The LCD panel contains almost 3 million thin film transistors, which
provide exceptionally sharp video quality. Occasionally, a few
non-active pixels may appear on the screen as a fixed blue, green, or red
point. These non-active pixels do not adversely affect the performance
of your TV, and are not considered defects.
DX-32L151A11-37L130A11_10-0567.book Page 4 Tuesday, June 1, 2010 9:26 AM
4
DX-32L151A11/DX-37L130A11
Installing the stand or removing the stand column
Installing the stand or removing
the stand column
4 Carefully lift the TV into an upright position.
To remove the stand, perform these steps in reverse order.
Removing the stand column
Cautions
• Read these instructions carefully before you try to assemble the
stand or remove the stand column.
• Make sure that you handle the TV carefully when attempting to
assemble or remove the stand. If you are not sure of your ability
to do this, contact a professional installer or service technician.
Dynex is not responsible for any damages or injuries that occur
because of mishandling or incorrect assembly.
• Use a soft cushion or covering to prevent scratching or damage to
the TV screen or cabinet.
• The speaker is not intended to support the weight of the TV. Do
not move or handle the TV by the speaker. This can cause damage
that is not covered by your warranty.
• Before assembly or removal of the stand, unplug the power cord.
You must install your TV into the stand in order for it to stand upright on
a cabinet or other flat surface. If you intend to mount your TV on a wall
or other vertical surface, you must remove the stand column.
You must remove the stand column before you can wall-mount the TV.
Note: Your TV may differ from the illustrations shown.
To remove the stand column:
1 Lay the TV (screen down) on the edge of the table or bench. Make
sure that you put a soft cloth or cushion between the table or
bench and the TV.
2 Remove the four screws holding the stand column to the TV, then
remove the stand column.
Installing the stand
You must install the stand to use the TV in an upright position on a flat
surface.
Note: Your TV may differ from the illustrations shown.
To install the stand:
1 Remove the stand from the box and place it on a table or bench.
2 Lay the TV (screen down) on the edge of the table or bench. Make
sure that you put a soft cloth or cushion between the table or
bench and the TV.
Stand column
Installing a wall-mount bracket
If you want to attach the TV to a wall-mount bracket (not provided), you
should first remove the stand pedestal, if it is already attached.
To install a wall-mount bracket:
Table edge
Stand
Stand column
3 Align the locators on the stand column with the locating holes on
the stand, then secure the stand to the column with the four M5
screws (provided).
1 Lay your TV face down on a table or bench. Make sure that you
put down a soft cushion or cloth so that your TV is not scratched.
2 Remove the pedestal stand.
3 Remove the stand column. See “Removing the stand column” on
page 4.
4 Secure the wall-mount bracket to the back of your TV using the
four M6 screws provided with the bracket.
TV components
Accessories
Locators
Locating holes
Table edge
Stand
Four M5 screws
Make sure the following accessories are included in the box with your
TV:
• Remote control
• Composite video & audio cable
• AC power cord
• AAA batteries (2)
• Stand
• Quick Start Guide
DX-32L151A11-37L130A11_10-0567.book Page 5 Tuesday, June 1, 2010 9:26 AM
TV components
DX-32L151A11/DX-37L130A11
Front
Item Name
5
Side
Description
1
Remote control
sensor
Receives signals from the remote control.
Do not block. For more information, see
“Aiming the remote control” on page 8.
2
Power indicator
Lights red when your TV is in standby mode.
Flashes red when your TV is turned on, then
turns off when the TV stabilizes.
Item Name
1
CH
Description
/ CH
In TV mode, press to select the next or
previous channel.
In menu mode, press to move up or down.
2
VOL+ / VOL-
In TV mode, press to increase or decrease the
volume.
In menu mode, press to move right or left or to
adjust menu settings.
3
MENU
Press to open the on-screen menu.
4
INPUT
Press to open the INPUT SOURCE menu. For
more information, see “Selecting the video
input source” on page 12.
5
(power)
Press to turn on the TV or put the TV in standby
mode.
Caution: The TV continues to receive power
even in standby mode. Unplug the power cord
to disconnect power.
DX-32L151A11-37L130A11_10-0567.book Page 6 Tuesday, June 1, 2010 9:26 AM
6
DX-32L151A11/DX-37L130A11
TV components
Back
Item Name
SERVICE PORT
9
Connect component video devices to these
COMPONENT IN jacks. For more information, see “Connecting
jacks
a component video device” on page 9.
L AUDIO R
HDMI 2
Connect an audio amplifier to these jacks.
10 AUDIO OUT jacks For more information, see “Connecting a
home theater system“ on page 10.
ANT/CABLE IN
11 jack
VIDEO
AV IN
Description
Connect an antenna or cable TV to this jack.
For more information, see “Connecting an
antenna, cable TV, or satellite TV box” on
page 9.
Remote control
AUDIO OUT L AUDIO R
AUDIO
DIGITAL OUTPUT HDMI 1
Item Name
VGA
Y
PC IN
ANT/ CABLE IN
PB
L AUDIO R
PR
COMPONENT IN
Description
1
SERVICE PORT
For software updates only. Do not use.
2
(headphone)
jack
Plug headphones into this jack. For more
information, see “Connecting headphones”
on page 11.
3
HDMI 2 jack
Connect an HDMI device to this jack. For
more information, see “Connecting an HDMI
device” on page 9.
4
AV IN jacks
Connect a standard AV device, such as a
camcorder or game console, to these jacks.
5
AC IN
Plug the power cord into this jack and into a
power outlet. For more information, see
“Connecting the power” on page 8.
6
Connect a digital optical cable to this
DIGITAL OUTPUT connector, then to a digital sound system.
jack
For more information, see “Connecting
using a digital audio cable” on page 11.
7
HDMI 1 jack
Connect an HDMI device to this jack. For
more information, see “Connecting an HDMI
device” on page 9.
8
PC IN VGA /
AUDIO jacks
Connect a computer to these jacks. For more
information, see “Connecting a computer”
on page 10.
Item Name
Description
1
POWER
Press to turn on the TV or put the TV in standby
mode.
Caution: The TV continues to receive power
even in standby mode. Unplug the power cord
to disconnect power.
2
COMP
Press to select the device connected to the
COMPONENT IN jacks
DX-32L151A11-37L130A11_10-0567.book Page 7 Tuesday, June 1, 2010 9:26 AM
Using the remote control
Item Name
3
4
DX-32L151A11/DX-37L130A11
Description
Item Name
HDMI
Press once to select a device connected to the
HDMI 1 jack.
Press twice to select a device connected to the
HDMI 2 jack.
Numbers/.
Press the number buttons to enter channel
numbers or the parental control password.
Press the dot button to select a digital
sub-channel.
For more information, see “Selecting a channel”
on page 12.
5
INPUT
Press to open the INPUT SOURCE menu. For
more information, see “Selecting the video
input source” on page 12.
6
VOL+ / VOL–
Press to increase or decrease the volume.
7
MENU
Press to open the on-screen menu.
Press or
menus.
8
to move up or down in on-screen
Press or to move left or right in on-screen
menus or to adjust menu settings.
ENTER
Press to confirm selections in on-screen menus
or to open sub-menus.
10 GUIDE
Press to open the DTV program guide (if
available). For more information, see
“Displaying program information” on page 13.
11 MTS/SAP
In analog TV mode, press to select STEREO,
SAP (secondary audio language), or MONO.
In digital TV mode (DTV), press to select the
audio track. For more information, see
“Selecting the audio mode” on page 16.
12 CCD
Press to turn closed captioning on or off. For
more information, see “Turning closed
captioning on or off” on page 23.
13 ZOOM
Press to select the screen aspect ratio. You can
select Auto, Normal, Zoom, Wide, and
Cinema. For more information, see “Adjusting
the TV picture” on page 14.
14 FAVORITE
Press to open the favorite channel list. For more
information, see “Setting up a favorite channel
list” on page 18.
15 VIDEO
Press to select the device connected to the AV
IN Jack.
16 TV
Press to select the TV as the video input source.
For more information, see “Selecting the video
input source” on page 12.
17 RECALL
Press to go to the last viewed channel. For more
information, see “Selecting a channel” on page
12.
18 CH
Press to go to the next or previous channel in
the channel list. For more information, see
“Automatically scanning for channels” on
page 17 and “Selecting a channel” on page 12.
9
/CH
19 MUTE
Press to mute the sound. Press again to restore
the sound.
20 INFO
Press to display the information banner. For
more information, see “Displaying program
information” on page 13.
21 EXIT
Press to close the on-screen menu.
22 SLEEP
Press to set the sleep timer. For more
information, see “Setting the sleep timer” on
page 26.
7
Description
23 CH-LIST
Press to open the channel list. For more
information see “Selecting a channel” on
page 12.
24 PICTURE
Press to select the picture mode. You can select
Vivid, Standard, Theater, Sports, Energy
Saving, and Custom. For more information, see
“Adjusting the TV picture” on page 14.
25 AUDIO
Press to select the sound mode. You can select
Standard, Movie, Music, News, or Custom. For
more information, see “Adjusting the sound” on
page 15.
Using the remote control
Installing remote control batteries
To install remote control batteries:
1 Press down on the battery compartment cover lock, then remove
the remote control cover.
2 Insert two AAA batteries into the battery compartment. Make
sure that the + and – symbols on the batteries match the +
and – symbols in the battery compartment.
3 Replace the cover. Make sure that the lock snaps into place.
Battery precautions:
• Dispose of batteries as hazardous waste.
• Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can
shorten the life of new batteries and can cause old batteries to leak.
• Remove batteries as soon as they become inoperable. Chemicals that
can leak from the batteries can cause a rash. If the batteries leak,
clean the battery compartment with a cloth.
• If the remote control is not used for an extended period of time,
remove the batteries.
• Do not expose batteries to excessive heat such as sunshine, fire, or
other heat sources.
DX-32L151A11-37L130A11_10-0567.book Page 8 Tuesday, June 1, 2010 9:26 AM
8
DX-32L151A11/DX-37L130A11
Making connections
Aiming the remote control
Codes for other remote controls are available online at:
http://www.dynexproducts.com/universalcontrolcodes.aspx
To aim the remote control:
• Point the remote control towards the remote sensor on the front
of your TV.
Tips:
• The brand name is often visible on the front of the universal remote
control, and the model number is often visible on the back.
• The codes shown above are common codes, but are subject to change.
Please refer to Dynexproducts.com for the most up to date codes.
• If your universal remote control isn’t listed on the chart, refer to your
universal remote control’s instructions and try codes for the brands
Orion, Emerson, Memorex, Sansui, Sylvania, or Zenith. You may need
to try several codes before finding a match.
2 Follow your universal remote control’s instructions to enter the
code you found in Step 1.
Tips:
• If your universal remote control has a code search feature, run a code
search to identify a code that matches your TV. See your universal
remote control’s instructions for details.
• If your universal remote control has a “learn” feature, you can
manually program it using your TV remote to “teach” the commands
one at a time. See your universal remote control’s instructions for
details.
Notes:
•
•
•
•
Do not expose the remote control to shock or liquids.
Do not use the remote control in an area with high humidity.
Do not place the remote control in direct sunlight.
Do not place objects, such as furniture, between the remote control
and the remote sensor.
• The remote control may not work if direct sunlight or bright light
shines on the remote sensor. Either move your TV or change the angle
at which you use the remote control.
Programming a universal remote control
to work with your TV
You can operate your TV with a new or existing universal remote
control.
To program your existing universal remote control:
1 To program your existing remote control to work with your Dynex
TV, see the table below for common codes. If you have problems
programming your remote, or need a different remote control
code, visit www.dynexproducts.com for the latest remote control
code information.
115
135
One for All
URC-6690
0464
Sony
RM-VL600
Note: Watching TV in total darkness or with a reflection on the screen
may cause eye strain.
8043
Connecting the power
Set-top box manufacturer and model
Comcast
M1057
0463
Dish
Network
VIP508,
VIP622
720
Motorola
DRC800
0463
Before you make any connections:
• Check the plugs on the ends of cables to make sure that they are
the correct type before you try plugging them into jacks on the
TV.
• Make sure that all plugs are securely inserted into the jacks.
Loose connections can result in image or color problems.
• When connecting devices to the TV, make sure that the TV and
the device are turned off and that the power cords are
unplugged.
You should select a location for the TV:
• Where direct light does not reflect on the screen
• That has indirect and soft lighting
• Where the TV has access to an antenna or cable TV connection
• Where the TV has access to a power outlet
Universal remote control manufacturer and model
RCA
RCU807
Making connections
Selecting a location
Dynex TV codes for universal remote controls
(for all Dynex TVs manufactured after Jan. 1, 2007)
Philips
PHDVD5,
PH5DSS,
PMDVR8,
PDVR8
3 If all else fails, you must use a different universal remote control
that can operate both your set-top box and your TV. Five such
remotes are listed on the chart, but many other compatible
models are available in the market.
4 For more help, call technical support for your universal remote
control or set-top box manufacturer, or call the Dynex Customer
Care Center. For US and Canada markets, call 1-800-305-2204.
For Mexico markets, call 01-800-926-3020.
TIVO
DirectTV
Series 3, HD RC23
0091
To connect the power cord:
• Connect the power cable to the AC IN jack on the back of the TV,
then connect the other end to a power outlet.
10463
Power cord
Power outlet
DX-32L151A11-37L130A11_10-0567.book Page 9 Tuesday, June 1, 2010 9:26 AM
Making connections
DX-32L151A11/DX-37L130A11
9
Connecting a component video device
Notes:
• The AC plug on the TV may be different from the one shown.
• Make sure that you only use the type of power source indicated on the
marking label.
• Always unplug the power cord when not using the TV for a long
period of time.
Connecting an HDMI device
Note: If your device has an HDMI connection, we recommend you use that
to get the best quality possible.
Component cables often have red, green, and blue color-coded video
connectors and red and white audio connectors. Match the colors when
making connections.
To connect a component video device:
1 Make sure that your TV’s power cord is unplugged and the
component video device is turned off.
2 Connect a component video cable to the COMPONENT OUT jacks
on the component video device.
Back of TV
To connect an HDMI device:
• Connect one end of an HDMI cable (not included) to the HDMI 1
jack on the back of your TV or HDMI 2 jack on the side of your TV,
then connect the other end of the cable to the HDMI OUT jack on
the HDMI device.
Back of TV
HDMI device
HDMI cable
Note: To connect a DVI device, use a DVI to HDMI adapter cable to connect
to the HDMI jack on the TV, then connect an audio cable to the
PC IN AUDIO jack on the back of the TV.
To play from the HDMI device:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select HDMI 1 or HDMI 2, then press ENTER.
Note: You can also press HDMI once to select HDMI 1 or twice to select
HDMI 2.
3 Turn on the HDMI device, then set it to the correct mode. Refer to
the instructions that came with the HDMI device.
Audio cable
Component video cable
Component video device
3 Connect the other end of the component video cable to the
COMPONENT jacks on the back of your TV.
4 Connect an audio cable (not included) to the AUDIO OUT jacks
(L/R) on the component device.
5 Connect the other end of the audio cable to the COMPONENT
AUDIO-R and AUDIO-L jacks on the back of your TV.
To play from the component video device:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select Component, then press ENTER.
Note: You can also press COMP once to select Component.
3 Turn on the component video device and start playback. Refer to
the instructions that came with the component video device.
Connecting an antenna, cable TV, or
satellite TV box
To connect an antenna, cable TV, or satellite TV box:
• Connect one end of a 75-Ohm, coaxial cable to the ANT/CABLE
IN jack on the back of the TV, then connect the other end of the
cable to the antenna or cable TV wall jack.
Back of TV
Wall jack
75-Ohm coaxial cable
• If you are connecting a satellite TV or cable box, you can use one
of the following (if available):
• Acceptable - 75-ohm coaxial cable.
DX-32L151A11-37L130A11_10-0567.book Page 10 Tuesday, June 1, 2010 9:26 AM
10
DX-32L151A11/DX-37L130A11
Making connections
Connecting a computer
• Good - Video composite cable
• Better - Video component cables
• Best - HDMI cable
To connect a computer:
Notes:
• We recommend using a 75-Ohm, coaxial cable to reduce interference
and noise that may be caused by radio wave transmissions.
• Do not bundle the coaxial cable with the power cord or any other
cables.
• If you are using an antenna and reception is not good, contact a
service technician to adjust the antenna.
1 Make sure that your TV’s power cord is unplugged and the
computer is turned off.
2 Connect one end of a VGA cable (not included) to the PC IN VGA
jack on the back of the TV, then connect the other end of the
cable to the VGA jack on the computer.
Back of TV
Connecting a VCR, camcorder, or game
console
Computer
Note: If the VCR, camcorder, or game console has component jacks
(better), or an HDMI jack (best), connect them using the best available
connection.
Audio cable
To connect a VCR, camcorder, or game console:
1 Make sure that your TV’s power cord is unplugged and the VCR,
camcorder, or game console is turned off.
2 Connect one end of a standard AV cable (not included) into the
AV IN VIDEO jack on the side of the TV, then connect the other
end of the cable to the AV OUT VIDEO jack on the external
device.
SERVICE PORT
HDMI 2
Camcorder
Note: The audio cable should have a stereo mini-plug.
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select VGA, then press ENTER.
3 Turn on the computer, then adjust the computer display
properties as needed.
Connecting a home theater system
L AUDIO R
AV IN
3 Connect one end of an audio cable (not included) to the
PC IN AUDIO jack on the back of the TV, then connect the other
end of the cable to the AUDIO OUT jack on the computer.
To play video from the computer:
VCR
Side of TV
AV cable
Connecting using an analog audio cable
Game console
VIDEO
VGA cable
Note: Cables are often
color-coded to connectors.
Connect yellow to yellow,
red to red, and white to
white.
To connect using an analog audio cable:
1 Make sure that your TV’s power cord is unplugged and the audio
amplifier is turned off.
2 Connect one end of a audio cable (not included) to the AUDIO
OUT jacks (L/R) on the back of the TV.
3 Connect the audio connectors of the AV cable (the red and white
connectors) to the AV OUT AUDIO jacks of the external device,
then connect them to the AV IN AUDIO-L and AUDIO-R jacks on
the side of your TV.
Back of TV
To play the external AV device:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select AV, then press ENTER.
Note: You can also press VIDEO once to select AV.
Audio amplifier
3 Turn on the device, then start playback on the device.
Audio cable
Note: Cable connectors and jacks are often color-coded. Match the colors
when you connect the AV cable.
3 Connect the other end of the audio cable to the AUDIO IN jacks
on the home theater system.
DX-32L151A11-37L130A11_10-0567.book Page 11 Tuesday, June 1, 2010 9:26 AM
Turning on your TV for the first time
DX-32L151A11/DX-37L130A11
Connecting using a digital audio cable
To connect using a digital optical cable:
1 Make sure that your TV’s power cord is unplugged and the digital
audio system is turned off.
2 Connect one end of a digital optical audio cable (not included) to
the DIGITAL OUTPUT jack on the back of the TV.
Back of TV
Digital sound system
11
Turning on your TV for the first
time
To configure your TV:
1 Make sure that you have inserted the batteries in the remote
control, connected your devices to the TV, and connected the AC
power.
2 Press (Power), then wait several seconds. The initial Setup
Wizard screen opens (only the first time you turn on your TV).
Digital optical cable
3 Connect the other end of the audio cable to the digital optical
input jack on the digital audio system.
Note: The DIGITAL OUTPUT jack only works with digital TV channels.
To play TV sound through a home theater system:
1 Turn on the TV and select a program to watch.
2 Turn on the home theater system and select the TV sound source,
then adjust the volume to a comfortable level.
3 Press or to select the menu language you want, then press
ENTER. The Time screen opens.
Connecting headphones
Warning: When using headphones, adjust the headphone volume to
avoid excessively loud volume which can damage your hearing.
To connect headphones:
L AUDIO R
VIDEO
AV IN
HDMI 2
SERVICE PORT
• Plug the headphones (not included) into the
jack on the side of the TV.
(headphone)
4 Press or to highlight Time Zone, then press or to
select your time zone. You can select Pacific, Alaska, Hawaii,
Atlantic, Eastern, Central, or Mountain.
5 If your viewing area observes daylight savings time, press or
to highlight DST, then press or to select On.
6 Press or to highlight Mode, then press or to select
Manual (to set the date/time manually), or Auto (the date/time
are automatically set by the TV signal source, based on the time
zone you selected).
7 If you select Manual mode, make the settings as follows:
• Press or to highlight Year, Month, or Day, then press
or to adjust the setting.
• Set the time by pressing or to highlight Time, then
press or to highlight the hour, minute, or AM/PM field.
Press or to adjust the setting.
8 Press ENTER. The Choose your Picture Mode screen opens.
DX-32L151A11-37L130A11_10-0567.book Page 12 Tuesday, June 1, 2010 9:26 AM
12
DX-32L151A11/DX-37L130A11
9 Press or to select Home Mode or Retail Mode, then press
ENTER.
If you select Home Mode, the Choose your TV source screen
opens.
-ORIf you select Retail Mode, a message stating “Are you sure you
want Retail mode? Since in this mode Energy saving is not
realized.” appears. Select Yes to proceed, or No to exit.
Understanding the basics
Understanding the basics
Turning your TV on or off
To turn your TV on or off (standby mode):
1 Plug the power cord into an AC power outlet.
2 Press (power). Your TV turns on.
3 Press again to turn off your TV. When you turn off your TV, it
goes into standby mode.
Warning: When your TV is in standby mode, it is still receiving power. To
completely disconnect power, unplug the power cord.
Note: If your TV does not receive an input signal for several minutes, it
automatically goes into standby mode.
Selecting the video input source
To select the video input source:
1 Turn on your TV, then press the INPUT key on the remote, or the
INPUT button on the TV. The INPUT SOURCE menu opens.
10 Press or to select Antenna, Cable, or Cable/Satellite
Box, depending on the type of connection you have.
• If you are using an antenna for a standard or HD TV signal,
select Antenna.
• If your cable is connected directly to the TV (without a tuner
box), select Cable.
• If your cable is connected to your TV through a tuner box,
select Cable/Satellite Box.
11 Press when you have made your selection. The channel scan
screen opens.
If you selected Antenna or Cable, your TV automatically scans
for available channels in your area and stores the channel
information in the channel list. This may take several minutes.
While scanning, the TV displays a progress report.
– OR –
If you selected Cable/Satellite Box, the auto scan is not
necessary and the screen will ask you to select the correct input
source for your set top box. Press EXIT to close the menu.
Notes:
• During auto scan, digital programs will be scanned first, then analog
programs. When all available digital programs have been searched,
the screen will ask you to “Press MENU or EXIT if you don’t need
analog channel scan.” At this point you can press EXIT to exit the
analog channel scan, or just ignore it and the TV will go on scanning.
• Channel scan can take up to 30+ minutes.
• You can press EXIT at any time to stop the auto scan, but you will
need to run the auto scan again to create a channel list.
12 Select the corresponding video input source through the INPUT
SOURCE menu.
INPUT SOURCE
TV
AV
Component
HDMI1
HDMI2
VGA
2 Press or to highlight the video source, then press ENTER.
You can also select the input source using the following remote
control buttons:
• VIDEO—Press switch to AV input.
• HDMI–Press repeatedly to cycle between HDMI inputs.
• TV—Press to switch to TV mode.
• COMP—Press to switch to Component input.
Selecting a channel
To select a channel:
• Press CH / CH to go to the next or previous channel.
• Press the number buttons to enter the channel number you want,
then wait for the channel to change, or press ENTER to change
the channel immediately.
• To select a digital channel, press the number buttons to
select the main digital channel, then press the dot (.) button,
then the number buttons again to select the sub-channel.
Wait for the channel to change or press ENTER to change the
channel.
Note: Button presses must be within three seconds of each other.
• Press RECALL to go to the last channel viewed.
• Press CH-LIST to display a list of memorized channels, press or
to select the channel you want from the list, then press ENTER
to go to that channel.
• Press FAVORITE to display a list of your saved favorite channels,
press or to select the channel you want from the list, then
press ENTER to go to that channel.
DX-32L151A11-37L130A11_10-0567.book Page 13 Tuesday, June 1, 2010 9:26 AM
Understanding the basics
DX-32L151A11/DX-37L130A11
Note: If the list has more than one page, press
the pages.
or
to scroll through
Setup menu
Adjusting the volume
Picture
To adjust the volume:
• Press VOL+ or VOL– to increase or decrease the volume.
• Press MUTE to temporarily turn off all sound. Press MUTE again
to restore the sound.
Displaying program information
To display program information:
• Press INFO to show an information banner. The information
banner shows current program information such as channel
number, video input source, and resolution.
• Digital signal information—Displays channel number,
station name, channel label (if preset), broadcast program
name, TV rating, signal type, audio information, resolution,
CC mode, current time, and current program start and end
times when watching a digital channel.
• Analog signal information—Displays channel number,
channel label (if preset), signal type, audio information, and
resolution when watching an analog channel.
• Press GUIDE to show the digital program guide, which may show
a list of available programs, program times, and program
summaries, depending on the information provided by the
broadcaster.
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Move
Picture menu
Audio
Setup
Channel
Off
Select
MENU
Exit
Channel menu
Picture
TV Source
Auto Scan
F avorites
Show/Hide
Channel No.
Channel Label
DTV Signal:
Move
On-screen menu overview
13
Audio
Setup
Channel
Antenna
2.1
WGBH-SD
Normal
Select
MENU
Exit
Notes:
Depending on the signal source selected, you may see different options on
your screen. The above menus are shown in TV mode.
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Move
Audio
Setup
Channel
Custom
70
40
60
0
50
30
Select
MENU
Exit
Audio menu
Picture
Sound Mode
Bass
Treble
Balance
Surround
AVC
Digital Output
Audio Language
Move
Audio
Setup
Channel
Custom
57
50
0
Off
Off
RA W
English
Select
MENU
Exit
Menu items that are not selectable are grayed out. Menus in this manual
are described in TV mode, unless otherwise indicated.
The illustrations and screens shown in the manual are for explanation
purposes and may vary from the actual screens on your TV.
DX-32L151A11-37L130A11_10-0567.book Page 14 Tuesday, June 1, 2010 9:26 AM
14
DX-32L151A11/DX-37L130A11
Adjusting the picture
Navigating the menus
Press to display the Main menu.
Press to select menus, to adjust selected
items, or move on-screen cursor left or right.
Press to select the menu items.
Press to confirm your selection or enter a
sub-menu.
3 Press or to highlight an option, then press ENTER to enter
the sub-menu. You can select:
• Parental Controls—Control which programs/movies your
children can watch, based on industry ratings.
• Time—Set the clock and sleep timer.
• Closed Caption—Turn closed captioning on or off. Also lets
you set closed caption options.
• Menu Settings—Set menu language and menu
transparency.
• VGA Settings—Lets you adjust picture settings to optimize
a computer display. (This menu becomes available only
when a computer display is connected to the television.)
• Input Label—Create a unique name for a device connected
to your TV’s input jacks.
• Restore Default—Reset most TV settings for the current
source to factory default values.
• Audio Only—Turn off the TV picture and listen to audio
only.
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Adjusting the picture
Press to return to the previous screen.
Adjusting the TV picture
To adjust the picture:
Press to close the menu.
1 Press MENU. The on-screen menu opens with the Picture menu
displayed.
Adjusting basic settings
To adjust basic settings:
1 Press MENU. The Picture menu opens.
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Channel
70
40
60
0
50
30
MENU
Exit
to highlight Setup, then press . The Setup menu
Picture
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Move
Setup
Custom
Select
Move
2 Press or
opens.
Audio
Picture
Audio
Setup
Channel
Off
Select
MENU
Exit
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Move
Audio
Setup
Channel
Custom
70
40
60
0
50
30
Select
MENU
Exit
2 Press or to highlight an option, then press or to adjust
the option. You can select:
• Picture Mode—Selects the picture mode. You can select:
• Vivid (a bright and vivid picture)
• Standard (a standard picture)
• Sports (a dynamic picture)
• Theater (a finely detailed picture)
• Energy Saving (the backlight brightness is decreased)
• Custom (customized picture).
Note: You can also press PICTURE on the remote control to
select the picture mode.
• Contrast—Adjusts the contrast.
• Brightness—Adjusts the brightness.
• Color—Adjusts the color saturation.
• Tint—Adjusts the image tint.
• Sharpness—Adjusts the sharpness.
• Backlight—Adjusts the screen backlight.
3 Press or to highlight Advanced Video, then press ENTER
to enter the sub-menu.
DX-32L151A11-37L130A11_10-0567.book Page 15 Tuesday, June 1, 2010 9:26 AM
Adjusting the sound
DX-32L151A11/DX-37L130A11
4 Press or to highlight an option, then press or to adjust
the option. You can select:
• Color Temperature—Selects the color temperature. You
can select Warm (to enhance the reds), Cool (to enhance
the blues), or Normal.
• Zoom Mode— Selects the aspect ratio of the picture. You
can select:
• Auto (selects the correct aspect ratio automatically.
Available only when Auto Zoom is turned ON).
• Normal (selects the correct aspect ratio to match the
source image).
• Wide (shows a full-screen picture).
• Zoom (enlarges the picture but may crop the top and
bottom).
• Cinema (stretches the picture at the edges, but
maintains a good aspect ratio at the center of the
screen).
Notes:
• The above aspect ratios are all available only when Overscan is
turned ON when watching a digital program.
• You can also press ZOOM on the remote control to select the aspect
ratio of the picture.
• Noise Reduction—Selects the noise reduction mode to
reduce picture noise (snow). You can select Weak, Middle,
Strong, or Off.
• Overscan—Turn this On to adjust the picture’s
reproduction rate.
• Adaptive Contrast—Turn this On to optimize the picture
display for a more vivid image.
• DCR—Turn this On to activate the Dynamic Backlight
Control function. Depending on the signal, the TV
automatically adjusts the backlight level, which affects the
overall brilliance of the picture.
• Auto Zoom—In TV mode, setting Auto Zoom to On lets you
set the Zoom Mode to Auto.
5 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Adjusting the computer image
To adjust the computer image:
1 Make sure that your TV is in VGA mode. For more information, see
“Selecting the video input source” on page 12.
2 Press MENU. The on-screen menu opens.
3 Press or
opens.
to highlight Setup, then press . The Setup menu
Picture
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Move
Audio
Setup
Channel
Off
Select
MENU
Exit
4 Press or to highlight VGA Settings, then press ENTER. The
VGA settings menu opens.
Picture
Audio
Setup
Channel
70
40
60
50
H . Position
V . Position
Clock
Phase
Auto
Move
Select
MENU
Exit
5 Press or to highlight an option, then press or to adjust
the option. You can adjust:
• H-Position—Moves the image right or left
• V-Position—Moves the image up or down
• Clock—Adjusts the sample frequency
• Phase—Adjusts the focus of stable images
• Auto—Automatically adjusts the image settings such as
position and phase
6 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Adjusting the sound
Adjusting the sound
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Move
Audio
Setup
Channel
To adjust the sound:
Custom
70
40
60
0
50
30
Select
MENU
Exit
15
1 Press MENU. The on-screen menu opens.
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Move
Audio
Setup
Channel
Custom
70
40
60
0
50
30
Select
MENU
Exit
DX-32L151A11-37L130A11_10-0567.book Page 16 Tuesday, June 1, 2010 9:26 AM
16
DX-32L151A11/DX-37L130A11
2 Press or
opens.
Adjusting the sound
to highlight Audio, then press . The Audio menu
Playing TV audio only
You can turn off the picture on your TV and listen to only the program
audio.
To play only the TV audio:
Picture
Sound Mode
Bass
Treble
Balance
Surround
AVC
Digital Output
Audio Language
Move
Audio
Setup
Channel
1 Press MENU. The on-screen menu opens.
Custom
57
50
0
Off
Off
RA W
English
Select
MENU
Exit
3 Press or to highlight an option, then press or to adjust
the option. You can select:
• Sound Mode—Selects the sound mode. You can select:
• Standard (for normal programs)
• News (for news programs)
• Music (for musical programs)
• Movie (for movies)
• Custom (for a customized sound mode).
Note: You can also press AUDIO one or more times to select the
sound mode.
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
• Balance—Adjusts the balance between the left and right
audio channels.
• Surround—Turns the surround sound effect on or off.
• AVC—(Auto volume control) Equalizes the overall volume
levels for all channels.
• Digital Output—(digital channels only) Selects the digital
audio output mode. You can select RAW (outputs audio in its
original format) or PCM (outputs the audio in PCM mode, if
available).
• Audio Language—(digital channels only) Selects an
alternate audio language, if available.
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Selecting the audio mode
You can select the audio mode for analog channels.
To select the audio mode for analog channels:
• Press MTS/SAP on the remote one or more times. You can select:
• MONO—Select this option if there is noise or static on weak
stereo broadcasts.
• STEREO—Select this option for programs broadcast in
stereo.
• SAP—Select this option to listen to a secondary audio
program, if available.
Note: Mono is automatically selected if the program is broadcast in
mono.
To select an audio track for a digital channel:
• Press MTS/SAP. The audio track plays if one is available.
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Channel
70
40
60
0
50
30
MENU
Exit
to highlight Setup, then press . The Setup menu
Picture
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Move
Setup
Custom
Select
Move
2 Press or
opens.
Audio
Audio
Setup
Channel
On
Select
MENU
Exit
3 Press or to highlight Audio Only, then press or to
select On.
4 Press EXIT to close the menu. After pressing EXIT, the picture will
turn off in approximately 5 to 10 seconds.
Notes:
Audio Only works only when the input source is TV and your TV is receiving
a broadcast signal.
To exit Audio Only mode, press any button. When you exit Audio Only
mode, the Audio Only option is automatically reset to Off.
DX-32L151A11-37L130A11_10-0567.book Page 17 Tuesday, June 1, 2010 9:26 AM
Changing channel settings
DX-32L151A11/DX-37L130A11
Changing channel settings
17
Selecting the signal source
To select the signal source:
Automatically scanning for channels
1 Press MENU. The on-screen menu opens.
To auto scan for channels:
1 Press MENU. The on-screen menu opens.
Picture
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Move
Audio
Setup
Channel
Custom
70
40
60
0
50
30
Select
MENU
Exit
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Move
Audio
Setup
Channel
Custom
70
40
60
0
50
30
Select
Exit
MENU
2 Press or to highlight Channel, then press . The Channel
menu opens.
2 Press or to highlight Channel, then press . The Channel
menu opens.
Picture
Picture
TV Source
Auto Scan
F avorites
Show/Hide
Channel No.
Channel Label
DTV Signal:
Move
Audio
Setup
Channel
Antenna
TV Source
Auto Scan
F avorites
Show/Hide
Channel No.
Channel Label
DTV Signal:
Audio
Setup
Channel
Antenna
2.1
WGBH-SD
Normal
2.1
WGBH-SD
Move
Normal
Select
MENU
Exit
3 Press or to select Antenna or Cable, depending on your
setup.
4 Press or to highlight Auto Scan, then press ENTER. A
confirmation box opens.
Select
MENU
Exit
3 Press or to select Antenna, Cable, or Cable/Satellite
Box.
4 Press EXIT to close the menu.
Hiding channels
You can delete channels from the channel list so that your TV skips the
channels when you press CH /CH . You can still tune to the hidden
channel by using the number buttons.
To hide a channel:
1 Press MENU. The on-screen menu opens.
Press ”ENTER” Key to Select
Picture
5 Press or to select Yes, then press ENTER to start the scan. A
progress box shows the progress of the scan.
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Move
Audio
Setup
Channel
Custom
70
40
60
0
50
30
Select
MENU
Exit
DX-32L151A11-37L130A11_10-0567.book Page 18 Tuesday, June 1, 2010 9:26 AM
18
DX-32L151A11/DX-37L130A11
Changing channel settings
2 Press or to highlight Channel, then press . The Channel
menu opens.
Picture
TV Source
Auto Scan
F avorites
e
Show/Hide
Channel No.
Channel Label
DTV Signal:
Move
Audio
Setup
TV Source
Auto Scan
F avorites
Show/Hide
Channel No.
Channel Label
DTV Signal:
2.1
WGBH-SD
Normal
Move
Exit
MENU
3 Press or to highlight Show/Hide, then press ENTER. The
channel list opens.
4 Press or to highlight the channel you want to hide (the
default is to show the channel), then press ENTER to remove the
check mark from the channel.
Note: If the list has more than one page, press
the pages.
Picture
Channel
Antenna
Select
2 Press or to highlight Channel, then press . The Channel
menu opens.
or
to scroll through
5 Press EXIT to close the menu.
Audio
Setup
Antenna
2.1
WGBH-SD
Normal
Select
You can create a favorite channel list so you can quickly browse through
your favorite channels by pressing FAVORITE, then selecting a channel
from the favorite channel list.
To set up the favorite channel list:
Exit
MENU
3 Select the signal source of the channel you want to set up on the
favorites list.
4 Press or to highlight Favorites, then press ENTER. The
favorite channel list opens.
5 Press or to highlight the channel you want to add to the
favorite list, then press ENTER to mark the channel. A check mark
appears if the channel is added to the list. The check mark
disappears if you delete the channel from the list.
Note: If the list has more than one page, press
the pages.
Setting up a favorite channel list
Channel
or
to scroll through
6 Press EXIT to close the menu.
7 To select a channel in the favorite channel list, press FAVORITE,
press or to highlight the channel, then press ENTER.
Adding or changing a channel label
1 Press MENU. The on-screen menu opens.
If a channel is not already labeled, you can label the channel to make it
easier to identify. You can also relabel a channel that is already labeled.
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Move
Audio
Setup
Channel
To label a channel:
1 Press MENU. The Picture menu opens.
Custom
70
40
60
0
50
30
Select
MENU
Exit
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Move
Audio
Setup
Channel
Custom
70
40
60
0
50
30
Select
MENU
Exit
DX-32L151A11-37L130A11_10-0567.book Page 19 Tuesday, June 1, 2010 9:26 AM
Setting parental controls
DX-32L151A11/DX-37L130A11
2 Press or to highlight Channel, then press . The Channel
menu opens.
Picture
TV Source
Auto Scan
F avorites
Show/Hide
Channel No.
Channel Label
DTV Signal:
Move
Audio
Setup
2 Press or to highlight Channel, then press . The Channel
menu opens. The DTV signal strength is shown at the bottom of
the menu.
Channel
Picture
Antenna
TV Source
Auto Scan
F avorites
Show/Hide
Channel No.
Channel Label
DTV Signal:
2.1
WGBH-SD
Normal
Select
Setup
Channel
2.1
WGBH-SD
Normal
Select
Move
3 Select the signal source of the channel you want to label.
4 Press or to highlight Channel No., then press or to
select the channel you want to label.
5 Press or to highlight Channel Label, then press ENTER.
The Channel Label screen opens.
Audio
Audio
Antenna
Exit
MENU
Picture
19
Setup
Channel
ABC ದ
MENU
Exit
3 Press EXIT to close the menu.
Setting parental controls
Parental controls let you prevent your children from watching
inappropriate material on TV. When set, parental controls read the
rating of the program (with some exceptions, such as news and sports)
and deny access to programs that exceed the ratings level you select. To
watch programs that exceed the selected rating, you must enter a
password.
Turning parental controls on or off
To turn parental controls on or off:
1 Press MENU. The on-screen menu opens.
Move
Select
MENU
Exit
6 Press or to select a character, then press or
the next position. Repeat to add more characters.
7 Press MENU to exit to the previous menu.
to move to
Checking digital TV signal strength
You can check the signal strength of digital channels to determine if you
need to adjust your antenna or digital cable input. The higher the signal
strength, the less likely you are to experience picture degradation.
To check signal strength:
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Audio
Channel
Custom
70
40
60
0
50
30
Select
Move
Setup
MENU
Exit
1 Press MENU. The on-screen menu opens.
2 Press or
opens.
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Move
Audio
Setup
to highlight Setup, then press . The Setup menu
Channel
Custom
70
40
60
0
50
30
Select
MENU
Exit
Picture
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Move
Audio
Setup
Channel
Off
Select
MENU
Exit
DX-32L151A11-37L130A11_10-0567.book Page 20 Tuesday, June 1, 2010 9:26 AM
20
DX-32L151A11/DX-37L130A11
Setting parental controls
3 Press ENTER. The Enter Password screen opens.
Picture
Audio
3 Press ENTER. The Enter Password screen opens.
Setup
Channel
____
Enter Password
Picture
Audio
Setup
Channel
____
Enter Password
4 Press the number buttons to enter the four-digit password. The
default password is 0000. The Parental Controls sub-menu opens.
4 Press the number buttons to enter the four-digit password. The
default password is 0000. The Parental Controls sub-menu opens.
5 Press or to highlight System Lock, then press or to
select On (to enable the blocking scheme you set up and to set
up the blocking scheme (otherwise the rating setting cannot be
accessed) or Off (to disable the blocking scheme you set up).
6 Press EXIT to close the menu.
5 Press or to highlight Change Password, then press
ENTER. The password entry screen opens.
Picture
Audio
Setting or changing the password
Enter New Password
Confirm Password
To set the parental password:
Setup
Channel
____
____
____
Enter Old Password
1 Press MENU. The on-screen menu opens.
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Setup
Channel
Move
70
40
60
0
50
30
Select
Move
2 Press or
opens.
Audio
Custom
MENU
Exit
to highlight Setup, then press . The Setup menu
Select
Exit
6 Press the number buttons to input old password, then input a
new password. On the next line, enter the new password again to
confirm it. The Parental Controls sub-menu reopens.
Note: If you forget your password, enter 9999.
7 Press EXIT to close the menu.
Turning the button lock on or off
To turn the parental controls button lock on or off:
1 Press MENU. The on-screen menu opens.
Picture
Audio
Setup
Channel
Picture
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Move
MENU
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Off
Select
MENU
Audio
Setup
Channel
Custom
70
40
60
0
50
30
Exit
Move
Select
MENU
Exit
DX-32L151A11-37L130A11_10-0567.book Page 21 Tuesday, June 1, 2010 9:26 AM
Setting parental controls
2 Press or
opens.
DX-32L151A11/DX-37L130A11
to highlight Setup, then press . The Setup menu
Setting parental control levels
You can set parental controls for the U.S. and Canada. The following
procedure shows how to set controls for U.S. TV ratings. You use similar
steps for controlling U.S. movie and Canadian TV ratings.
Picture
Audio
Setup
Channel
To set parental controls:
1 Press MENU. The on-screen menu opens.
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Move
Picture
Off
Select
MENU
Exit
3 Press ENTER. The Enter Password screen opens.
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Picture
Audio
Setup
Audio
Setup
Channel
Custom
70
40
60
0
50
30
Select
Move
Enter Password
21
MENU
Exit
Channel
____
4 Press the number buttons to enter your four-digit password. The
Parental Controls sub-menu opens.
5 Press or to highlight Button Lock, then press or to
select ON (to turn the Button Lock on) or OFF (to turn the Button
Lock off).
2 Press or
opens.
to highlight Setup, then press . The Setup menu
Picture
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Move
Audio
Setup
Channel
Off
Select
MENU
Exit
3 Press ENTER. The Enter Password screen opens.
Picture
Enter Password
6 Press EXIT to close the menu.
With the Button Lock on, the buttons on the TV control panel are locked.
The message “Use remote to enable button” will appear every time you
press a button on the TV control panel. Unplug your TV, then reconnect
it to turn the Button Lock off.
Audio
Setup
Channel
____
4 Press the number buttons to enter your four-digit password. The
Parental Controls sub-menu opens.
DX-32L151A11-37L130A11_10-0567.book Page 22 Tuesday, June 1, 2010 9:26 AM
22
DX-32L151A11/DX-37L130A11
5 Press or
select On.
Setting parental controls
to highlight System Lock, then press
or
to
9 Press EXIT to close the menu.
U.S. TV ratings (age-based)
TV-Y
All children.
TV-Y7
Suitable for children 7 and older.
TV-G
General audiences.
TV-PG
Parental guidance suggested.
TV-14
Parental guidance strongly suggested.
TV-MA
Mature audiences only.
U. S. TV ratings (content-based)
6 Press or to highlight US, then press ENTER. The US Settings
sub-menu opens.
Note: Select Canada to set Canadian TV controls.
FV
Fantasy violence.
V
Violence.
S
Sexual situations.
L
Strong language.
D
Suggestive dialog.
U.S. movie (MPAA) ratings
Picture
Audio
Setup
Channel
TV
MPAA
Move
Select
MENU
G
General audiences.
PG
Parental guidance suggested.
PG-13
Suitable for children 13 and older.
R
Parental guidance suggested for children
under 17.
NC-17
Not suitable for children under 17.
X
Adults only.
N/A
Movie is not rated.
Exit
Canadian English ratings
7 Press or to highlight TV, then press ENTER. The US TV
RATING sub-menu opens.
Note: You can also select MPAA to set controls for US movie ratings.
Picture
Audio
Setup
Channel
C
Suitable for all children.
C8+
Suitable for children 8 and older.
G
General audiences.
PG
Parental guidance suggested.
14+
Suitable for children 14 and older.
18+
Adults only.
EXEMPT
Exempt programming.
Canadian French ratings
: Block
Move
Press ENTER to Block or Unblock
Select
MENU
Exit
8 Press
or to highlight the rating you want to block,
then press ENTER. A lock symbol appears when a rating is
blocked.
Note: On the MPAA RATING screen, press or to select the rating. That
rating and all other higher ratings are blocked.
G
General audiences.
8+
Suitable for children 8 and older.
13+
Suitable for children 13 and older.
16+
Suitable for children 16 and older.
18+
Adults only.
EXEMPT
Exempt programming.
DX-32L151A11-37L130A11_10-0567.book Page 23 Tuesday, June 1, 2010 9:26 AM
Using closed captioning
DX-32L151A11/DX-37L130A11
Downloading rating information
6 Press or to highlight RRT Setting, then press ENTER. If the
program is broadcast with RRT5 rating information, the
information is downloaded automatically and can be used for
parental controls.
You can download rating information to use when setting parental
controls.
To download rating information:
Note: If you want to clear the downloaded rating information, select
Reset RRT. The rating information is cleared. If rating information is
broadcast by another program, your TV downloads the new
information.
1 Press MENU. The on-screen menu opens.
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Setup
Channel
Custom
Using closed captioning
70
40
60
0
50
30
Select
Move
2 Press or
opens.
Audio
MENU
Turning closed captioning on or off
To turn closed captioning on or off:
1 Press MENU. The on-screen menu opens.
Exit
Picture
to highlight Setup, then press . The Setup menu
Picture
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Audio
Setup
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Channel
2 Press or
opens.
Off
MENU
Enter Password
Audio
Setup
Setup
Channel
Custom
70
40
60
0
50
30
MENU
Exit
to highlight Setup, then press . The Setup menu
Exit
Picture
3 Press ENTER. The Enter Password screen opens.
Picture
Audio
Select
Move
Select
Move
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Channel
____
4 Press the number buttons to enter your four-digit password. The
Parental Controls sub-menu opens.
Move
Audio
Setup
Channel
Off
Select
MENU
Exit
3 Press or to highlight Closed Caption, then press
ENTER. The closed caption menu opens.
Picture
CC Mode
Basic Selection
Advanced S election
Option
5 Press or
select On.
23
to highlight System Lock, then press
or
to
Move
Audio
Setup
Channel
On
CC1
Service1
Select
MENU
Exit
or
DX-32L151A11-37L130A11_10-0567.book Page 24 Tuesday, June 1, 2010 9:26 AM
24
DX-32L151A11/DX-37L130A11
Using closed captioning
4 Press or to highlight CC Mode, then press or to select
the CC mode. You can select On (turns on closed captioning),
CC on Mute (turns on closed captioning when the sound is
muted), or Off (turns off closed captioning).
5 Press EXIT to close the menu.
Note: If the channel is analog, the Basic Selection will be available and
the Advanced Selection will be grayed out (inactive).
Picture
Tip: You can also press CCD on the remote control to turn closed
captioning on or off.
CC Mode
Basic Selection
Advanced S election
Option
Selecting the closed captioning mode
Audio
Setup
Channel
On
CC1
Service1
To select the closed captioning mode:
1 Press MENU. The on-screen menu opens.
Select
Move
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Setup
Exit
6 Press or to select a closed captioning mode. You can select:
• CC1 through CC4—Closed captioning appears in a small
banner across the bottom of the screen. CC1 is usually the
“printed” version of the audio. CC2 through CC4 display
content provided by the broadcaster.
• Text1 through Text4—Closed captioning that covers half
or all of the screen. Text1 through Text4 display content
provided by the broadcaster.
7 Press EXIT to close the menu.
70
40
60
0
50
30
MENU
MENU
Channel
Custom
Select
Move
2 Press or
opens.
Audio
Exit
to highlight Setup, then press . The Setup menu
Customizing digital TV closed captioning
styles
To customize digital TV closed captioning:
Picture
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Audio
Off
MENU
Exit
3 Press or to highlight Closed Caption, then press
ENTER. The closed caption menu opens.
Picture
CC Mode
Basic Selection
Advanced S election
Option
Move
4 Press
On.
5 Press
or
1 Press MENU. The on-screen menu opens.
Channel
Picture
Select
Move
Setup
Audio
Setup
or
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
2 Press or
opens.
Channel
70
40
60
0
50
30
MENU
Exit
to highlight Setup, then press . The Setup menu
On
CC1
Service1
Select
Picture
MENU
Exit
to highlight CC Mode, then press
or
to select
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Move
or
Setup
Custom
Select
Move
Channel
Audio
to highlight Basic Selection.
Audio
Setup
Channel
Off
Select
MENU
Exit
DX-32L151A11-37L130A11_10-0567.book Page 25 Tuesday, June 1, 2010 9:26 AM
Adjusting time settings
DX-32L151A11/DX-37L130A11
3 Press or to highlight Closed Caption, then press
ENTER. The closed caption menu opens.
Picture
CC Mode
Basic Selection
Advanced S election
Option
Audio
Setup
or
Channel
25
• FG Color—To select a color for the text.
• BG Color—To select a color for the background.
• FG Opacity—To select the opacity for the text.
• BG Opacity—To select the opacity for the background.
9 Press MENU to return to the previous menu, or press EXIT to
close the menu.
On
CC1
Service1
Adjusting time settings
Setting the date and time
To set the date and time:
Select
Move
MENU
1 Press MENU. The on-screen menu opens.
Exit
4 Press or to highlight CC Mode, then press or to select
On.
5 Press or to highlight Advanced Selection (only available
for digital stations), then press or to select an advanced
digital closed captioning option. You can select Service1 Service6 (displays content provided by the broadcaster).
Picture
CC Mode
Basic Selection
Advanced S election
Option
Audio
Setup
Channel
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
2 Press or
opens.
MENU
Exit
6 Press or to highlight Option, then press ENTER. The DTV
closed captioning styles menu opens.
Picture
Audio
Setup
Channel
Select
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Move
Default
Default
Default
Default
Default
Default
Default
Default
Default
Mode
Font Style
Font Size
Font Edge Style
Font Edge Color
FG Color
BG Color
FG Opacity
BG Opacity
7 Press or
Custom.
MENU
Exit
to highlight Setup, then press . The Setup menu
Picture
Move
Channel
CC1
Service1
Select
Move
Setup
70
40
60
0
50
30
Select
Move
On
Audio
Custom
Audio
Setup
Channel
Off
Select
MENU
Exit
3 Press or to highlight Time, then press ENTER. The time
setting menu opens.
MENU
to highlight Mode, then press
Exit
or
to select
Note: To reset the closed captioning styles to their defaults, set Mode to
Default.
8 Press or to highlight a style, then press or to adjust
the style. You can select:
• Font Style—To select a style for the words.
• Font Size—To select a edge style for the words.
• Font Edge Style—To select a size for the words.
• Font Edge Color—To select a color for the edges.
4 Press or to highlight Time Zone, then press or to
select your time zone. You can select Pacific, Alaska, Hawaii,
Atlantic, Eastern, Central, or Mountain.
DX-32L151A11-37L130A11_10-0567.book Page 26 Tuesday, June 1, 2010 9:26 AM
26
DX-32L151A11/DX-37L130A11
Adjusting menu settings
5 If your viewing area observes daylight savings time, press or
to highlight DST, then press or to select On.
6 Press or to highlight Mode, then press or to select
Manual (to set the date/time manually), or Auto (the date/time
are automatically set by the TV signal source, based on the time
zone you selected).
7 If you select Manual mode, make the settings as follows:
• Press or to highlight Year, Month, or Day, then press
or to adjust the setting.
• Set the time by pressing or to highlight Time, then
press or to highlight the hour, minute, or AM/PM field.
Press or to adjust the setting.
8 Press EXIT to close the menu.
Setting the sleep timer
You can specify the amount of time before your TV automatically turns
off.
4 Press or to highlight Sleep Timer, then press or to
select the amount of time you want your TV to wait before it
automatically turns off.
Note: To turn off the sleep timer, select Off.
5 Press EXIT to close the menu.
Note: You can also press SLEEP on the remote control to set the sleep
timer.
Adjusting menu settings
Selecting the menu language and
transparency
To select the on-screen menu language and menu transparency:
1 Press MENU. The on-screen menu opens.
To set the sleep timer:
1 Press MENU. The on-screen menu opens.
Picture
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Channel
70
40
60
0
50
30
MENU
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
2 Press or
opens.
Exit
Channel
Custom
70
40
60
0
50
30
Select
Move
Setup
MENU
Exit
to highlight Setup, then press . The Setup menu
to highlight Setup, then press . The Setup menu
Picture
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Move
Setup
Custom
Select
Move
2 Press or
opens.
Audio
Audio
Audio
Setup
Channel
Off
Select
MENU
Exit
3 Press or to highlight Time, then press ENTER. The time
setting menu opens.
3 Press or to highlight Menu Settings, then press ENTER.
The Menu Settings menu opens.
Picture
Transparency
Menu Language
Move
Audio
Setup
Channel
25%
English
Select
MENU
Exit
DX-32L151A11-37L130A11_10-0567.book Page 27 Tuesday, June 1, 2010 9:26 AM
Adjusting menu settings
DX-32L151A11/DX-37L130A11
4 Press or to highlight Menu Language, then press or
to select the menu language you want. Options include English,
French, and Spanish.
5 Press or to select Transparency, then press or to
select the menu transparency you want. Options include 0%,
25%, 50%, 75%, and 100%.
6 Press EXIT to close the menu.
Labeling an input source
You can add a label to an input source to make it easier to identify.
27
6 Press or to select a character, then press or to move to
the next position. Repeat this step to add more characters.
7 To reset the label to factory default, press or to highlight
Reset Label then press ENTER. Follow the on-screen
instructions.
8 Press EXIT to close the menu. The next time you press the INPUT
button on the remote control, you will see your new label in the
INPUT SOURCE menu.
Restoring default settings
Caution: When you restore default settings, all the settings (except the
password and parental rating) you have customized are reset.
To label an input source:
1 Press MENU. The on-screen menu opens.
To restore default settings:
1 Press MENU. The on-screen menu opens.
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Setup
Channel
Custom
70
40
60
0
50
30
Select
Move
2 Press or
opens.
Audio
MENU
Exit
to highlight Setup, then press . The Setup menu
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Picture
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Audio
Setup
MENU
Exit
3 Press or to highlight Input Label, then press ENTER. The
Input Label screen opens.
Picture
Present Label
Custom Label
Reset Label
Move
Audio
Setup
Channel
Custom
T V
Select
MENU
MENU
Exit
to highlight Setup, then press . The Setup menu
Channel
Off
Select
Channel
70
40
60
0
50
30
Picture
Move
Setup
Custom
Select
Move
2 Press or
opens.
Audio
Exit
4 Press or to highlight a preset label from several options, or
select Custom to enter your own label.
5 If you select Custom, press or to highlight Custom Label,
then press .
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Move
Audio
Setup
Channel
Off
Select
MENU
Exit
3 Press or to highlight Restore Default, then press ENTER.
A confirmation box opens.
4 Press or to select Yes, then press ENTER.
5 Press EXIT to close the menu.
DX-32L151A11-37L130A11_10-0567.book Page 28 Tuesday, June 1, 2010 9:26 AM
28
DX-32L151A11/DX-37L130A11
Troubleshooting
Before calling for service, check the following information for possible
solutions to problems you may experience. If none of these solutions
work, turn off the TV, then turn it on again.
Caution: Do not try to repair the TV yourself. Refer all servicing to
qualified repair personnel.
Troubleshooting
Remote control
Problem
Remote control does not
work.
• Make sure that the power cord is
plugged in.
• Make sure that there are no
obstructions between the remote
control and the remote control
sensor on the front of the TV.
• Make sure that the batteries are
installed correctly. For more
information, see “Installing
remote control batteries” on
page 7.
• Replace the batteries. For more
information, see “Installing
remote control batteries” on
page 7.
Trouble programming your
existing universal remote
control.
• See instructions and a table of
common codes in “Programming
a universal remote control to
work with your TV” on page 8.
• Codes are subject to change. For
up to date codes, go to
www.dynexproducts.com.
• Replace the batteries. For more
information, see “Installing
remote control batteries” on
page 7.
• Refer to the User Guide that
accompanied your universal
remote control and contact the
manufacturer if problems persist.
Video and audio
Problem
No picture (screen is not lit)
and no sound.
Dark, poor, or no picture
(screen is lit), but sound is
good.
Solution
• Make sure that the power cord is
plugged in.
• Press POWER on the TV or the
remote control.
• Make sure that the correct video
input source is selected. For more
information, see “Selecting the
video input source” on page 12.
• Try another channel. The station
may be experiencing problems.
• Adjust the brightness. For more
information, see “Adjusting the
TV picture” on page 14.
• Make sure that the correct picture
mode is selected. For more
information, see “Adjusting the
TV picture” on page 14.
• Make sure that the antenna or
cable TV is connected correctly
and securely. For more
information, see “Connecting an
antenna, cable TV, or satellite TV
box” on page 9.
No color, dark picture, or
color is not correct.
• Adjust the color saturation. For
more information, see “Adjusting
the TV picture” on page 14.
Only snow (noise) appears
on the screen.
• Try another channel. The station
may be experiencing problems.
• Make sure that the antenna or
cable TV is connected correctly
and securely. For more
information, see “Connecting an
antenna, cable TV, or satellite TV
box” on page 9.
• Check the signal strength. See
“Checking digital TV signal
strength” on page 19.
Dotted lines or stripes
appear on the screen.
• Adjust the antenna.
• Move the TV away from noise
sources such as cars, neon signs,
or hair dryers.
Double images.
• Use a highly directional outdoor
antenna or cable TV.
The picture has a few bright
or dark spots.
• A few bright or dark spots on an
LCD screen is normal. It does not
affect the operation of this TV.
Good picture, but no
sound.
• Make sure that the sound is not
muted.
• Make sure that the sound mode is
set to Stereo or Mono. For more
information, see “Selecting the
audio mode” on page 16.
Audio noise.
• Make sure that there is no
interference with infrared
equipment such as a cordless
telephone or headphones. Move
the infrared equipment away
from the TV to eliminate the
noise.
Solution
General
Problem
Solution
One or more channels do
not display.
• Make sure that the channels are
not blocked. For more
information, see “Setting parental
control levels” on page 21.
• Make sure that the channels are
not hidden. For more information,
see “Hiding channels” on page 17.
• The channel may have been
deleted from the channel list. You
can tune to the channel by
pressing the number buttons or
you can add the channel back to
the channel list. For more
information, see “Changing
channel settings” on page 17.
Password is lost.
• Enter 9999 to access parental
controls, then set a new
password. For more information,
see “Setting parental controls” on
page 19.
Some settings cannot be
accessed.
• If a setting is grayed, the setting is
not available in the current video
input mode.
TV cabinet creaks.
• When the TV is in use, the
temperature rises naturally and
may cause the cabinet to expand
or contract which can cause a
creaking noise. This is not a
malfunction.
Control buttons on the TV
do not work.
• Disconnect the power cord, wait a
few seconds, then reconnect the
power cord and turn on the TV.
DX-32L151A11-37L130A11_10-0567.book Page 29 Tuesday, June 1, 2010 9:26 AM
Maintenance
DX-32L151A11/DX-37L130A11
Note: If the problem is not solved by using these troubleshooting
instructions, try turning off your TV, then turning it on again.
Maintenance
Cleaning
• Clean your TV with a soft, dry cloth. If surfaces are extremely
dirty, use a soft cloth dampened with a weak detergent solution.
• Use an eyeglass cleaner to clean the screen. Never use alcohol,
paint thinner, or benzine.
• Before using a chemically treated cloth, read the instructions that
came with the cloth.
Specifications
Specifications subject to change without notice.
Weight and dimensions shown are approximate.
TV type LCD
TV panel 32-inch TFT LCD (DX-32L151A11)
TV system
Receiving channels
Audio multiples
Audio out
Power requirement
Power consumption
Dimensions
(W × H × D with stand)
Weight
Input terminals
Output terminals
Control terminals
37-inch TFT LCD (DX-37L130A11)
NTSC-M, ATSC
VHF: 2 - 13
UHF: 14 - 69
CATV: 1 - 125
CADTV: 1-135
DTV: 2-69
BTSC system
8 W x 2 (32”)
10 W x 2 (37”)
AC 120 V, 60 Hz
98 W (32”)
145 W (37”)
30.55 × 21.5 × 10.4 inches
(776 × 546 × 255 mm) - 32”
35.4 × 24.8 × 11 inches
(899 × 631 × 280 mm) - 37”
25.35 lbs. (11.5 kg) - 32”
36.15 lbs. (16.4 kg) - 37”
Composite video/L and R audio (1)
Component video/L and R audio (1)
HDMI (2)
VGA/audio (1)
Antenna (1)
Audio left and right (1)
Digital optical (1)
Headphone (1)
SERVICE PORT (1)
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this
product is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
29
This equipment has been tested and found to comply within the limits
for a class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
FCC warning
Changes or modifications not expressly approved by the party
responsible for compliance with the FCC Rules could void the user’s
authority to operate this equipment.
Cables
Connections to this device must be made with shielded cables with
metallic RF/EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003
du Canada.
Standard Television Receiving Apparatus — Appareil de réception
télévision ordinaire, Canada BETS-7 / NTMR-7
HDMI
HDMI, the HDMI logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LCC.
DX-32L151A11-37L130A11_10-0567.book Page 30 Tuesday, June 1, 2010 9:26 AM
30
DX-32L151A11/DX-37L130A11
Legal notices
DX-32L151A11-37L130A11_10-0567.book Page 31 Tuesday, June 1, 2010 9:26 AM
Legal notices
One-year limited warranty
US and Canada Markets
Definitions:
Dynex Products ("Dynex") warrants to you, the original purchaser of this new
Dynex-branded television ("Product"), that the Product shall be free of defects in the
original manufacturer of the material or workmanship for a period of one (1) year from
the date of your purchase of the Product ("Warranty Period"). For this warranty to apply,
your Product must be purchased in the United States or Canada from a Best Buy or
Future Shop authorized dealer of Dynex brand products only that are packaged with this
warranty statement.
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the date you purchased the
Product. Your purchase date is printed on the receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or workmanship
of the Product is determined to be defective by an authorized Dynex repair center or
store personnel, Dynex will (at its sole option): (1) repair the Product with new or
rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable
products or parts. Products and parts replaced under this warranty become the property
of Dynex and are not returned to you. If service of Products or parts are required after
the Warranty Period expires, you must pay all labor and parts charges. This warranty
lasts as long as you own your Dynex Product during the Warranty Period. Warranty
coverage terminates if you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a Best Buy or Future Shop retail store location and your
television Product has a screen size of less than 37 inches, please take your original
receipt and the Product to any Best Buy or Future Shop store. Make sure that you place
the Product in its original packaging or packaging that provides the same amount of
protection as the original packaging. If you purchased the Product from a Best Buy or
Future Shop online web site, mail your original receipt and the Product to the address
listed on the web site. Make sure that you put the Product in its original packaging or
packaging that provides the same amount of protection as the original packaging.
To obtain in-home warranty service for a television with a screen 37 inches or larger, in
the United States call 1-888-BESTBUY, Canada call 1-866-BESTBUY for Future Shop call
1-800-663-2275. Call agents will diagnose and correct the issue over the phone or will
have a Dynex-approved repair technician dispatched to your home.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the product in the United States
and Canada at Best Buy or Future Shop branded retail stores or websites.
What does the warranty not cover?
This warranty does not cover:
• Customer instruction/education
• Installation
• Set up adjustments
• Cosmetic damage
• Damage due to acts of God, such as power surges
• Accident(s)
• Misuse
• Abuse
• Negligence
• Commercial purposes/use, including but not limited to use in a place of business
or in communal areas of a multiple dwelling condominium or apartment
complex, or otherwise used in a place of other than a private home.
• Modification of any part of the Product, including the antenna
• Plasma display panel damaged by static (non-moving) images applied for
lengthy periods (burn-in).
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage or power supply
• Attempted repair by any person not authorized by Dynex to service the Product
• Products sold "as is" or "with all faults"
• Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)
• Products where the factory applied serial number has been altered or removed
• Loss or Theft of this product or any part of the product
DX-32L151A11/DX-37L130A11
31
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE
REMEDY FOR BREACH OF WARRANTY. DYNEX SHALL NOT BE LIABLE FOR ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF
USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. DYNEX PRODUCTS MAKES NO
OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND
IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH
ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE
WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO
PROVINCE.
Contact Dynex:
For customer service please call 1-800-305-2204
www.Dynexproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645
© 2010 BBY Solutions, Inc.
All rights reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some
countries. All other products and brand names are trademarks of their respective
owners.
Mexico Market
{RETAILER SEAL}
PLACE STICKER OF PRODUCT MAKE & MODEL HERE
DATE OF PURCHASE:____________________________
Definitions:
Dynex Products ("Dynex") warrants to you, the original purchaser of this new
Dynex-branded television ("Product"), that the Product shall be free of defects in the
original manufacturer of the material or workmanship for a period of one (1) year from
the date of your purchase of the Product ("Warranty Period"). For this warranty to apply,
your Product must be purchased in the United States or Canada from a Best Buy or
Future Shop authorized dealer of Dynex brand products only that are packaged with this
warranty statement.
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the date you purchased the
Product. Your purchase date is printed on the receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or workmanship
of the Product is determined to be defective by an authorized Dynex repair center or
store personnel, Dynex will (at its sole option): (1) repair the Product with new or
rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable
products or parts. Products and parts replaced under this warranty become the property
of Dynex and are not returned to you. If service of Products or parts are required after
the Warranty Period expires, you must pay all labor and parts charges. This warranty
lasts as long as you own your Dynex Product during the Warranty Period. Warranty
coverage terminates if you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a Best Buy retail store location and your television
Product has a screen size of less than 37 inches, please take your original receipt and the
Product to any Best Buy store. Make sure that you place the Product in its original
packaging or packaging that provides the same amount of protection as the original
packaging. If you purchased the Product from a Best Buy online web site, mail your
original receipt and the Product to the address listed on the web site. Make sure that
you put the Product in its original packaging or packaging that provides the same
amount of protection as the original packaging.
To obtain in-home warranty service for a television with a screen 37 inches or larger, in
Mexico call 01 800-433-5778. Call agents will diagnose and correct the issue over the
phone or will have a Dynex-approved repair technician dispatched to your home.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the product in Mexico at a Best
Buy branded retail stores or website.
DX-32L151A11-37L130A11_10-0567.book Page 32 Tuesday, June 1, 2010 9:26 AM
32
DX-32L151A11/DX-37L130A11
What does the warranty not cover?
This warranty does not cover:
• Customer instruction/education
• Installation
• Set up adjustments
• Cosmetic damage
• Damage due to acts of God, such as power surges
• Accident(s)
• Misuse
• Abuse
• Negligence
• Commercial purposes/use, including but not limited to use in a place of business
or in communal areas of a multiple dwelling condominium or apartment
complex, or otherwise used in a place of other than a private home.
• Modification of any part of the Product, including the antenna
• Plasma display panel damaged by static (non-moving) images applied for
lengthy periods (burn-in).
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage or power supply
• Attempted repair by any person not authorized by Dynex to service the Product
• Products sold "as is" or "with all faults"
• Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)
• Products where the factory applied serial number has been altered or removed
• Loss or Theft of this product or any part of the product
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE
REMEDY FOR BREACH OF WARRANTY. DYNEX SHALL NOT BE LIABLE FOR ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF
USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. DYNEX PRODUCTS MAKES NO
OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND
IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH
ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE
WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO
PROVINCE.
Contact Dynex:
For service, please call 01 800-926-3020
www.dynexproducts.com
Distributed by Best Buy Imports, S. de R.L. de C.V.
Av. Santa Fe 485, Segundo Piso,
Colonia Cruz Manca,
Programa Parcial de Desarrollo Santa Fe,
Delegación Cuajimalpa, Distrito
Federal, México 05349
RFC#BBI0802114Q2
© 2010 BBY Solutions, Inc.
All rights reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some
countries. All other products and brand names are trademarks of their respective
owners.
Legal notices
DX-32L151A11-37L130A11_10-0567.book Page 1 Tuesday, June 1, 2010 9:26 AM
If the power cord has been damaged, it should be replaced by the manufacturer, your service
provider or qualified personnel to avoid risks.
Si el cordón de alimentación es dañado, este debe ser remplazado por el fabricante o su agente de
servicio o por personal calificado para evitar el riesgo.
www.dynexproducts.com
US and Canada Market - (800) 305-2204
Mexico Market - 01 800-926-3020
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave. South, Richfield, MN 55423 U.S.A.
© 2010 BBY Solutions, Inc. All rights reserved.
DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and
brand names are trademarks of their respective owners.
Best Buy Imports, S. de R.L. de C.V. Av. Santa Fe 485, Segundo Piso, Colonia Cruz Manca, Programa
Parcial de Desarrollo Santa Fe, Delegación Cuajimalpa, Distrito Federal, México 05349
RFC#BBI0802114Q2
Se incluye el manual. Favor de leer este manual antes de usar el producto.
Para el Soporte técnico de Dynex en México,
favor llame al:01 800-926-3020 http://www.dynexproducts.com
10-0567
ENGLISH