Washing Machine - Amazon Simple Storage Service

WF12F9****
Washing Machine
user manual
This manual is made with 100% recycled paper.
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive a more complete service, please
register your product at
www.samsung.com/register
ARNO-WIFI_F900E-03285E_EN_131120.indd 1
2013-11-20
5:50:42
contents
SETTING UP YOUR WASHING
MACHINE
12
WASHING A LOAD OF LAUNDRY
20
SMART CONTROL
31
12
13
13
13
14
14
14
14
14
Checking the parts
Meeting installation requirements
Electrical supply and grounding
Water Supply
Drain
Flooring
Surrounding temperature
Alcove or closet installation
Installing your washing machine
20
20
21
24
24
25
26
26
27
28
28
29
29
30
30
Washing for the first time
Basic instructions
Using the control panel
Child Lock
Sound Off
Smart Check
Delay End
My Cycle
Washing clothes using the cycle selector
Washing clothes manually
Laundry guidelines
Detergent and additives information
Which detergent to use
Detergent drawer
Liquid Detergent (Selected models)
31
31
31
32
38
43
Setting the Smart Control
Configuring the wired/wireless router
Check before installation
Setting the network (ANDROID)
Setting the network (IOS)
Connecting to the network using the WPS
settings (for WPS-enabled routers only)
Indoor control
Quick authentication (recommended)
Authentication (if the quick authentication
method fails)
Using the mobile app
Outdoor control
Registering your washer
Using the mobile app
44
44
46
49
51
51
53
CLEANING AND MAINTAINING YOUR
WASHING MACHINE
54
55
54
56
56
57
57
58
58
Eco Drum Clean
Draining the washing machine in an
emergency
Cleaning the debris filter
Cleaning the exterior
Cleaning the detergent drawer and drawer
recess
Cleaning the water hose mesh filter
Repairing a frozen washing machine
Storing your washing machine
English - 2
ARNO-WIFI_F900E-03285E_EN_131120.indd 2
2013-11-20
5:51:10
TROUBLESHOOTING AND
INFORMATION CODES
59
60
Check these points if your washing machine...
Information codes
61
Cycle chart
62
62
62
63
Fabric care chart
Protecting the environment
Declaration of conformity
Sheet of household washing machines (EU
Only)
Information of main washing programmes
Open Source Announcement
OpenSSL
59
CYCLE CHART
61
APPENDIX
62
64
65
77
English - 3
ARNO-WIFI_F900E-03285E_EN_131120.indd 3
2013-11-20
5:51:10
safety information
Congratulations on your new Samsung washer. This manual contains important
information on the installation, use and care of your appliance. Please take time to
read this manual to take full advantage of your washer’s many benefits and features.
WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS
Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the
extensive features and functions of your new appliance and retain it at a safe place near the appliance
for your future reference. Use this appliance only for its intended purpose as described in this instruction
manual.
Warnings and Important Safety Instructions in this manual do not cover all possible conditions and
situations that may occur. It is your responsibility to use common sense, caution, and care when installing,
maintaining, and operating your washer.
Because these following operating instructions cover various models, the characteristics of your washer
may differ slightly from those described in this manual and not all warning signs may be applicable. If you
have any questions or concerns, contact your nearest service center or find help and information online at
www.samsung.com.
IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS
What the icons and signs in this user manual mean:
WARNING
Hazards or unsafe practices that may result in severe personal injury,
death and/or property damage.
CAUTION
Hazards or unsafe practices that may result in personal injury and/or
property damage.
CAUTION
To reduce the risk of fire, explosion, electric shock, or personal injury
when using your washer, follow these basic safety precautions:
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions explicitly.
Unplug the power plug from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the service centre for help.
Note
These warning signs are here to prevent injury to you and others.
Please follow them explicitly.
After reading this section, keep it in a safe place for future reference.
Read all instructions before using the appliance.
As with any equipment using electricity and moving parts, potential hazards exist. To safely
operate this appliance, become familiar with its operation and exercise care when using it.
English - 4
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec10:4
2013-11-20
5:51:10
WARNING
This appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use of
the appliance in a safe way and understand the
hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not
be made by children without supervision.
01 SAFETY INFORMATION
Do not let children (or pets) play on or in your
washing machine. The washing machine door does
not open easily from the inside, and children may
be seriously injured if trapped inside.
Children should be supervised to ensure that they
do not play with the appliance.
If the plug (power supply cord) is damaged, it must
be replaced by the manufacturer or its service
agent or a similarly qualified person in order to
avoid a hazard.
This appliance should be positioned to be
accessible to the power plug, the water supply tabs
and the drain pipes.
For washing machines with ventilation openings in
the base, ensure that the opening is not obstructed
by carpet or any other obstacles.
Use the new hose-sets and old hose-sets should
not be reused.
English - 5
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec10:5
2013-11-20
5:51:11
safety information
WARNING
SEVERE WARNING SIGNS FOR INSTALLATION
The installation of this appliance must be performed by a qualified technician or service
company.
- Failure to do so may result in electric shock, fire, an explosion, problems with the
product, or injury.
The appliance is heavy, take care upon lifting it
Plug the power cord into an AC 220-240V / 50Hz wall socket or higher and use the socket
for this appliance only. In addition, do not use an extension cord.
- Sharing a wall socket with other appliances using a power strip or extending the power
cord may result in electric shock or fire.
- Ensure that the power voltage, frequency and current are the same as those of the
product specifications. Failure to do so may result in electric shock or fire. Plug the
power plug into the wall socket firmly.
Remove all foreign substances such as dust or water from the power plug terminals and
contact points using a dry cloth on a regular basis.
- Unplug the power plug and clean it with a dry cloth.
- Failure to do so may result in electric shock or fire.
Plug the power plug into the wall socket in the right direction so that the cord runs towards
the floor.
- If you plug the power plug into the socket in the opposite direction, the electric wires
within the cable may be damaged and this may result in electric shock or fire.
Keep all packaging materials well out of the reach of children, as packaging materials can
be dangerous to children.
- If a child places a bag over its head, it may result in suffocation.
When the appliance or power plug or power cord is damaged, contact your nearest service
centre.
This appliance must be properly grounded.
Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
- This may result in electric shock, fire, an explosion, or problems with the product.
- Never plug the power cord into a socket that is not grounded correctly and make sure
that it is in accordance with local and national codes.
Do not install this appliance near a heater, inflammable material.
Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct
sunlight and water (rain drops).
Do not install this appliance in a location of low temperature
- Frost may cause tubes to burst.
Do not install this appliance in a location where gas may leak.
- This may result in electric shock or fire.
Do not use an electric transformer.
- It may result in electric shock or fire.
Do not use a damaged power plug, damaged power cord or loose wall socket.
- This may result in electric shock or fire.
Do not pull or excessively bend the power cord.
Do not twist or tie the power cord.
English - 6
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec10:6
2013-11-20
5:51:11
Do not hook the power cord over a metal object, place a heavy object on the power cord,
insert the power cord between objects, or push the power cord into the space behind the
appliance.
- This may result in electric shock or fire.
Do not lay the power cord and tubes where you may fall over them.
CAUTION
CAUTION SIGNS FOR INSTALLATION
This appliance should be positioned in such a way that it is accessible to the power plug.
- Failure to do so may result in electric shock or fire due to electric leakage.
Install your appliance on a level and hard floor that can support its weight.
- Failure to do so may result in abnormal vibrations, moves, noise, or problems with the
product.
WARNING
01 SAFETY INFORMATION
Do not pull the power cord, when unplugging the power plug.
- Unplug the power plug by holding the plug.
- Failure to do so may result in electric shock or fire.
SEVERE WARNING SIGNS FOR USING
If the appliance is flooded, Turn off the water & power supply immediately and contact your
nearest service centre.
- Do not Touch the power plug with wet hands.
- Failure to do so may cause electric shock.
If the appliance generates a strange noise, a burning smell or smoke, unplug the power
plug immediately and contact your nearest service centre.
- Failure to do so may result in electric shock or fire.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without
touching the power plug. Do not touch the appliance or power cord.
- Do not use a ventilating fan.
- A spark may result in an explosion or fire.
Do not let children play in or on the washer. In addition, when disposing of the appliance,
remove the washer door lever.
- If trapped inside, the child may become trapped and suffocate to death.
Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the
washer before using it.
English - 7
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec10:7
2013-11-20
5:51:11
safety information
Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or
other flammable or explosive substances.
- This may result in electric shock, fire or an explosion.
Do not open the washer door by force while it is operating (high-temperature washing/
drying/spinning).
- Water flowing out of the washer may result in burns or cause the floor to be slippery.
This may result in injury.
- Opening the door by force may result in damage to the product or injury.
Do not insert your hand under the washer.
- This may result in injury.
Do not touch the power plug with wet hands.
- This may result in electric shock.
Do not turn the appliance off by unplugging the power plug while an operation is in
progress.
- Plugging the power plug into the wall socket again may cause a spark and result in
electric shock or fire.
Do not let children or infirm persons use this washer unsupervised. Do not let children climb
in the appliance.
- Failure to do so may result in electric shock, burns or injury.
Do not insert your hand or a metal object under the washer while it is operating.
- This may result in injury.
Do not unplug the appliance by pulling at the power cord, always grip plug firmly and pull
straight out from the outlet.
- Damage to the cord may cause short-circuit, fire and/or electric shock.
Do not attempt to repair, disassemble, or modify the appliance yourself.
- Do not use any fuse (such as cooper, steel wire, etc.) other than the standard fuse.
- When repairing or reinstalling the appliance is required, contact your nearest service
centre.
- Failure to do so may result in electric shock, fire, problems with the product, or injury.
If the water supply hose comes loose from the Water tap and floods the appliance, unplug
the power plug.
- Failure to do so may result in electric shock or fire.
Unplug the power plug when the appliance is not being used for long periods of time or
during a thunder/lightning storm.
- Failure to do so may result in electric shock or fire.
If any foreign substance enters into the appliance, unplug the power plug and contact you
nearest Samsung Customer Service.
- This may result in electric shock or fire.
English - 8
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec10:8
2013-11-20
5:51:11
CAUTION
CAUTION SIGNS FOR USING
When the washer is contaminated by a foreign substance such as detergent, dirt, food
waste, etc., unplug the power plug and clean the washer using a damp and soft cloth.
- Failure to do so may result in discolouration, deformation, damage or rust.
After a water supply failure or when reconnecting the water supply hose, open the Water
Tap slowly.
Open the Water Tap slowly after a long period of non-use.
- The air pressure in the water supply hose or the water pipe may result in damage to a
part or in water leakage.
If a drain error occurs during an operation, check if there is a draining problem.
- If the washer is used when it is flooded because of a draining problem, it may result in
electric shock or fire due to electric leakage.
01 SAFETY INFORMATION
The front glass may be broken by a strong impact. Take care when using the washer.
- When the glass is broken, it may result in injury.
Insert the laundry into the washer completely so that laundry does not get caught in the
door.
- If laundry gets caught in the door, it may result in damage to the laundry or the washer,
or result in water leakage.
Ensure that the Water Tap is turned off when the washer is not being used.
- Ensure that the screw on the water supply hose connector is properly tightened.
- Failure to do so may result in property damage or injury.
Take care that the rubber seal and the front door glass are not contaminated by a foreign
substance (e.g. waste, thread, hair, etc.)
- If a foreign substance is caught in the door or the door is not completely closed, it may
cause a water leakage.
Open the Water Tap and check if the water supply hose connector is firmly tightened and
that there is no water leaking before using the product.
- If the screws or the water supply hose connector are loose, it may result in water
leakage.
The product you have purchased is designed for domestic use only.
The use for business purposes qualifies as product misuse. In this case, the product will not
be covered by the standard warranty provided by Samsung and no responsibility can be
attributed to Samsung for malfunctions or damages resulting from such misuse.
English - 9
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec10:9
2013-11-20
5:51:11
safety information
Do not stand on top of the appliance or place objects (such as laundry, lighted candles,
lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
- This may result in electric shock, fire, problems with the product, or injury.
Do not spray volatile material such as insecticide onto the surface of the appliance.
- As well as being harmful to humans, it may also result in electric shock, fire or problems
with the product.
Do not place an object that generates a electromagnetic field near the washer.
- This may result in injury due to a malfunction.
Since the water drained during a high-temperature wash or drying cycle is hot, do not touch
the water.
- This may result in burns or injury.
Do not wash, spin or dry water-proof seats, mats or clothing (*) unless your appliance has a
special program for washing these items.
- Do not wash thick or hard mats even if the washing machine mark is on the care label.
This may result in injury or damage to the washing machine, walls, floor, or clothing due to
abnormal vibrations.
- Do not wash throw rugs or doormats with rubber backing. The rubber backing may come
off and stick to inside the drum, and this may result in malfunction such as a drainage
error.
* Woollen Bedding, rain covers, fishing vests, ski pants, sleeping bags, diaper covers, sweat
suits, and bicycle, motor cycle, car covers, etc.
Do not operate the washer when the detergent box is removed.
- This may result in electric shock or injury due to water leakage.
Do not touch the inside of the tub during or just after drying as it is hot.
- This may result in burns.
Do not insert your hand into the detergent box after opening it.
- This may result in injury as your hand may be caught by the detergent input device. Do not
place any objects (such as shoes, food waste, animals) other than laundry into the washer.
- This may result in damage to the washer, or injury and death in the case of pets due to the
abnormal vibrations.
Do not press the buttons using sharp objects such as pins, knifes, fingernails, etc.
- This may result in electric shock or injury.
Do not wash laundry contaminated by oils, creams or lotions usually found in skincare shops
or massage clinics.
- This may result in the rubber seal becoming deformed and water leakage.
Do not leave metal objects such as a safety pin or hair pin, or bleach in the tub for long
periods of time.
- This may cause the tub to rust.
- If rust starts appearing on the surface of the tub, apply a cleansing agent (neutral) to the
surface and use a sponge to clean it. Never use a metal brush.
Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry
contaminated by dry cleaning detergent.
- This may result in spontaneous combustion or ignition due to the heat of the oxidation of
the oil.
Do not use hot water from water cooling/heating devices.
- This may result in problems with the washer.
Do not use natural hand-washing soap for the washer.
- If it hardens and accumulates inside the washer, it may result in problems with the
product, discolouration, rust or bad odors.
English - 10
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec10:10
2013-11-20
5:51:11
Do not wash large laundry items such as Bedding in the washing net.
- Place socks and brassieres into the washing net and wash them with the other laundry.
- Failure to do so may result in injury due to abnormal vibrations.
For washing machines with ventilation openings in the base, ensure that the opening is not
obstructed by carpet or any other obstacles.
Make sure that the pockets of all clothing to be washed are empty.
- Hard, sharp objects, such as coins, safety pins, nails, screws, or stones can cause
extensive damage to the appliance.
Do not wash clothing with large buckles, buttons, or other heavy metal.
Do not leave the laundry which you have added detergent or applied stain remover or
pretreatment onto the laundry without washing it for a period of time.
- This may result in discoloration.
01 SAFETY INFORMATION
Do not use hardened detergent.
- If it accumulates inside the washer, it may result in water leakage.
Sort the laundry by color on the basis of its colorfastness and select the recommended cycle,
water temperature and additional functions.
- This may result in discoloration or fabric damage.
Take care that children’s fingers are not caught in the door when you close it.
- Failure to do so may result in injury.
WARNING
SEVERE WARNING SIGNS FOR CLEANING
Do not clean the appliance by spraying water directly onto it.
Do not use the a strong acidic cleaning agent.
Do not use benzene, thinner or alcohol to clean the appliance.
- This may result in discolouration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, unplug the appliance from the wall socket.
- Failure to do so may result in electric shock or fire.
INSTRUCTION ABOUT THE WEEE MARK
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic
accessories (e.g. charger, headset, USB cable) should not be disposed of with other household
waste at the end of their working life. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, please separate these items from other types of waste and
recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product and its electronic accessories should not be mixed with other commercial
wastes for disposal.
English - 11
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec10:11
2013-11-20
5:51:11
setting up your washing
machine
Be sure to have your installer follow these instructions closely so that your new
washing machine works properly and so that you’re not at risk of injury when doing
laundry.
CHECKING THE PARTS
Carefully unpack your washing machine, and make sure you’ve received all of the parts shown below.
If your washing machine was damaged during shipping, or if you do not have all of the parts, contact
Samsung Customer Service or your Samsung dealer.
Work top
Release lever
Detergent drawer
Control panel
Plug
Door
Drain hose
Emergency drain
tube
Levelling feet
Tub
Debris filter
Filter Cover
Spanner
* Bolt hole
covers
Cold
Hot
(Selected
model)
Water supply hose
Hose guide
Liquid
detergent box
(Selected
model)
* Bolt hole covers : The number of bolt hole covers depends on the model (3~6 covers).
English - 12
ARNO-WIFI_F900E-03285E_EN_131120.indd 12
2013-11-20
5:51:11
MEETING INSTALLATION REQUIREMENTS
WARNING
02 SETTING UP
Electrical supply and grounding
Never use an extension cord.
Use only the power cord that comes with your washing machine.
When preparing for installation, ensure that your power supply offers:
• AC 220-240 V / 50 Hz fuse or circuit breaker
• Individual branch circuit serving only your washing machine
Your washing machine must be grounded. If your washing machine malfunctions or breaks
down, grounding will reduce the risk of electric shock by providing a path of least resistance for
the electric current.
Your washing machine comes with a power cord having a three-prong grounding plug for use in
a properly installed and grounded outlet.
Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
Improperly connecting the equipment-grounding conductor can result in electric shock.
Check with a qualified electrician or serviceman if you are unsure if the washing machine is
properly grounded. Do not modify the plug provided with the washing machine. If it does not fit
the outlet, have a proper outlet installed by a qualified electrician.
Water Supply
Your washing machine will fill properly when your water pressure is 50 kPa ~ 800 kPa. Water
pressure less than 50 kPa may cause water valve failure, not allowing the water valve to shut
off completely. Or, it may take the washing machine longer to fill than what the controls allow,
resulting in your washing machine turning off. (A fill-time limit, designed to prevent overflows/
flooding if an internal hose becomes loose, is built into the controls.)
The water taps must be within 120cm of the back of your washing machine for the provided inlet
hoses provided to reach your washing machine.
Most plumbing supply stores sell inlet hoses of various lengths up to 305 cm long.
You can reduce the risk of leaks and water damage by:
• Making water taps easily accessible.
• Turning off taps when the washing machine is not in use.
• Periodically checking for leaks at water inlet hose fittings.
WARNING
Before using your washing machine for the first time, check all connections at the water
valve and taps for leaks.
English - 13
ARNO-WIFI_F900E-03285E_EN_131120.indd 13
2013-11-20
5:51:12
setting up your washing
machine
Drain
Samsung recommends a standpipe height of 65cm. The drain hose must be routed through
the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside
diameter of the drain hose. The drain hose is attached at the factory.
Flooring
For best performance, your washing machine must be installed on a solidly constructed floor.
Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting
and soft tile surfaces are contributing factors to vibrations and the tendency for your washing
machine to move slightly during the spin cycle.
Never install your washing machine on a platform or poorly supported structure.
Surrounding temperature
Do not install your washing machine in areas where water may freeze, since your washing
machine always retains some water in its water valve, pump, and hose areas. Frozen water in the
lines can cause damage to belts, the pump, and other components.
Alcove or closet installation
To operate safely and properly, your new washing machine requires minimum clearances of:
Sides – 25 mm
Rear – 50 mm
Top – 25 mm
Front – 465 mm
If both the washing machine and a dryer are installed together, the front of the alcove or closet
must have at least 465 mm unobstructed air opening. Your washing machine alone does not
require a specific air opening.
INSTALLING YOUR WASHING MACHINE
STEP 1
Selecting a location
Before you install the washing machine, make sure the location:
•
•
•
•
•
•
Has a hard, level surface without carpeting or flooring that may obstruct ventilation
Is away from direct sunlight
Has adequate ventilation
Will not be freezing (below 0 ˚C)
Is away from heat sources such as oil or gas
Has enough space so that the washing machine doesn’t stand on its power cord
English - 14
ARNO-WIFI_F900E-03285E_EN_131120.indd 14
2013-11-20
5:51:12
STEP 2
Removing the shipping bolts
1. Loosen all the bolts with the supplied wrench.
Option
2. Hold the bolt with the spanner and pull it through the wide
section of the hole. Repeat for each bolt.
02 SETTING UP
Before installing the washing machine, you must remove all shipping bolts from the back of the
unit.
Option
3. Fill the holes with the supplied plastic covers.
Option
4. Store the shipping bolts away safely in case you have to move the washing machine in the
future.
WARNING
Packaging materials can be dangerous to children; keep all packaging material (plastic
bags, polystyrene, etc.) well out of the reach of children.
English - 15
ARNO-WIFI_F900E-03285E_EN_131120.indd 15
2013-11-20
5:51:12
setting up your washing
machine
STEP 3
Adjusting the Levelling feet
When installing your washing machine, ensure that the power plug, the water supply and
the drain are easily accessible.
1. Slide the washing machine into position.
2. Level your washing
machine by turning the
levelling feet in and out as
necessary by hand.
3. When your washing machine is level, tighten the nuts using
the wrench supplied with your washing machine.
STEP 4
Connecting the water and drain
Connecting the water supply hose
Option
1. Take the L-shaped arm fitting for the cold water
supply hose and connect it to the cold water
supply intake on the back of the machine.
Tighten by hand.
The water supply hose must be connected to
the washing machine at one end and to the
water tap at the other. Do not stretch the water
supply hose. If the hose is too short, replace
the hose with a longer, high pressure hose.
2. Connect the other end of the cold water supply
hose to your sink’s cold water tap and tighten
it by hand. If necessary, you can reposition the
water supply hose at the washing machine end
by loosening the fitting, rotating the hose, and
retightening the fitting.
For selected models with an additional hot water intake:
1. Take the red L-shaped arm fitting for the hot water supply hose and connect it to the hot
water supply intake on the back of the machine. Tighten by hand.
2. Connect the other end of the hot water supply hose to your sink’s hot water tap and tighten
it by hand.
3. Use a Y-piece if you only want to use cold water.
English - 16
ARNO-WIFI_F900E-03285E_EN_131120.indd 16
2013-11-20
5:51:12
Connecting the water supply hose
Adaptor
02 SETTING UP
1. Remove the adaptor from the water supply hose.
Water supply
hose
2. First, using a ‘+’ type screwdriver, loosen the four screws
on the adaptor. Next, take the adaptor and turn part (2)
following the arrow until there is a 5 mm gap.
1
5 mm
2
3. Connect the adaptor to the water tap by tightening the
screws firmly while lifting the adaptor upwards.
Turn part (2) following the arrow and connect (1) and (2).
Water tap
1
2
4. Connect the water supply hose to the adaptor.
When you release part (3), the hose automatically
connects to the adaptor making a ‘click’ sound.
After you have connected the water supply
hose to the adaptor, ensure that it is connected
correctly by pulling the water supply hose
downwards.
3
5. Connect the other end of the water supply hose to the inlet
water valve at the rear of the washing machine. Screw the
hose clockwise all the way in.
Option
English - 17
ARNO-WIFI_F900E-03285E_EN_131120.indd 17
2013-11-20
5:51:13
setting up your washing
machine
6. Turn on the water supply and ensure that no water leaks
from the water valve, tap or adaptor. If there is a water
leaks, repeat the previous steps.
WARNING
•
Do not use your washing machine if there is a water leak.
This may cause electric shock or injury.
✗
✗
If the water tap has a screw type tap, connect the water
supply hose to the tap as shown.
Use the most conventional type of tap for the water supply. In case the tap is square or too
big, remove the spacing ring before inserting the tap into the adaptor.
Connecting the Aqua Hose (Selected models)
The Aqua Hose was invented for perfect leakage protection.
It is attached to the water supply hose and automatically cuts
off the water flow if the hose is damaged. It also displays a
warning indicator.
•
Connect the water supply hose to the tap as shown.
English - 18
ARNO-WIFI_F900E-03285E_EN_131120.indd 18
2013-11-20
5:51:13
Connecting the drain hose
2. ln a sink drain pipe branch: The drain pipe branch must be above the sink siphon so that
the end of the hose is at least 60 cm above the ground.
60 ~ 90 cm
Drain hose
02 SETTING UP
The end of the drain hose can be positioned in three ways:
1. Over the edge of a wash basin: The drain hose must be placed at a height of between 60 and
90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide
to the wall with a hook or to the tap with a piece of string to prevent the drain hose from moving.
Hose guide
The standpipe drain requires;
• minimum diameter 5 cm.
• minimum carry-away capacity 60 liter per minute.
60 ~ 90 cm
3. ln a drain pipe: We recommend using a 65 cm high vertical
pipe; it must be no shorter than 60 cm and no longer than
90 cm.
STEP 5
Powering your washing machine
Plug the power cord into a wall sockets, an AC 220-240V / 50Hz approved electrical outlet
protected by a fuse or circuit breaker. (For more information on electrical and grounding
requirements, see page 15.)
Test run
Make sure that you install your washing machine correctly by running the Rinse+Spin cycle
after the installation is complete.
STEP 6
Calibration mode
Samsung washing machine detects the laundry weight automatically. For more accurate weight
detection, please run Calibration Mode after the installation. Calibration Mode is done by
following the steps below.
1. Remove laundry or any contents in the machine and turn off the machine.
2. Press the Temp button and Delay End button simultaneously, and press the Power button
in addition. Then the machine turns on.
3. “CLB” will appear on the display.
4. Press the Start/Pause button to activate “Calibration Mode”.
5. The drum rotates clockwise and counterclockwise approximately for 3 minutes.
6. When “Calibration Mode” is finished, “END/Cycle is complete” appears on the display,
and the machine automatically turns off. The washing machine is now ready for use.
English - 19
ARNO-WIFI_F900E-03285E_EN_131120.indd 19
2013-11-20
5:51:13
washing a load of laundry
With your new Samsung washing machine, the hardest part of doing laundry will be
deciding which load to wash first.
WASHING FOR THE FIRST TIME
Before washing laundry for the first time, you must run a complete empty cycle (i.e. no laundry).
1. Press the Power button.
2. Add a little detergent to the detergent compartment
the detergent drawer.
3. Turn on the water supply to the washing machine.
4. Press the Start/Pause button.
in
This will remove any water that might be left over in the
machine from the manufacturer’s test run.
Compartment
Compartment
: Detergent for prewash, or starch.
: Detergent for the main wash, water softener, pre-soaking agent, bleach and
stain removal product.
To use liquid detergent, use the liquid detergent box (refer to page 30 of the manual for the
corresponding model). Do not add powdered detergent into the liquid detergent box.
Compartment
: Additives, e.g. fabric softener or former (fill no higher than lower edge (MAX)
of “A”).
BASIC INSTRUCTIONS
1. Load your laundry into the washing machine.
WARNING
Do not overload the washing machine. To determine the load capacity for each type of
laundry, refer to the chart on page 29.
• Make sure that laundry is not caught in the door, as this may cause a water leak.
• Washing detergent may remain in the front rubber part of the washer after a wash cycle.
Remove any remaining detergent, as they may cause a water leak.
• Do not touch the door glass while your washing machine is running or it may be hot.
• Do not open the detergent drawer or the debris filter while your washing machine is
running or you might be exposed to hot water or steam.
• Do not wash water-proofed items in normal cycle except outdoor care program.
2. Close the door until it latches.
3. Turn the power on.
Last Memory function
• When you turn your washing machine on, the last used setting is reflected on the control
panel. However, if the last used setting was Eco Drum Clean, Rinse+Spin or the Spin
cycle, this function is not applied.
• If you turn the Cycle Selector even slightly after turning the washing machine on, this
function does not applied and the control panel is reset.
4. Add detergent and additives to the dispenser drawer.
5. Select the appropriate cycle and options for the load.
The Wash Indicator light will illuminate and the estimated cycle time will appear in the display.
6. Press the Start/Pause button.
English - 20
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec5:20
2013-11-20
5:51:14
USING THE CONTROL PANEL
1
CYCLE SELECTOR
2
3
4
5
6
7
8
9
10
11
12
13
Select the tumble pattern and spin speed for the cycle.
For detailed information, refer to “Washing clothes using the cycle
selector”. (see page 27)
Cotton - For average or lightly soiled cottons, bed linen, table linen,
underwear, towels, shirts, etc.
Synthetics - For averagely or lightly soiled blouses, shirts, etc., made
of polyester (diolen, trevira), polyamide (perlon, nylon) or other similar
blends.
Denim - A higher water level in the main wash and extra rinse ensure
that no washing powder remains that may mark your clothing.
Bedding - For bed spread, bed sheet, Bedding cover etc.
Wash under 2.5 kg and only 1 kind of Bedding to achieve the best
result.
Dark Garment - Additional rinses and reduced spinning ensure that your
favourite dark clothes are washed gently and rinsed thoroughly.
Daily Wash - Use for everyday items such as underwear and shirts.
Eco Drum Clean - Use for drum cleaning. It cleanses dirt and bacteria
of drum. Regular use (after every 40 washes) is recommended. No
detergent or bleach needed.
Super Eco Wash - Low temperature Eco Bubble ensures that you
achieve perfect wash results while allowing effective energy saving.
Outdoor Care - Use for outdoor wear such as mountain clothes,
skiwear, and sports wear. Fabrics include functional technology finishes
and fibers such as spandex, stretch, and micro-fiber.
Baby Care - High temperature wash and extra rinses ensure that no
washing powder remains to mark your thin clothes.
Wool - Only for machine-washable wool. A load should be less than
2.0 kg.
• The wool course washes the laundry using gentle cradling actions.
During the wash, the gentle cradling and soaking actions are
continued to protect the wool fibers from shrinkage / distortion and
for a super gentle clean. This stop operation is not a problem.
• Neutral detergent is recommended for wool course, for improved
washing results and for improved care of the wool fibers.
Hand Wash - A very light wash cycle as gentle as a hand wash.
Spin - Performs an additional spin cycle to remove more water.
Rinse+Spin - Use for a load that needs rinsing only or to add rinseadded fabric softener to a load.
03 WASHING A LOAD OF LAUNDRY
1
English - 21
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec5:21
2013-11-20
5:51:15
washing a load of laundry
2
DIGITAL GRAPHIC
DISPLAY
Displays the remaining wash cycle time, all cycle information, and error
messages.
3
TEMP SELECTION
BUTTON
Press this button repeatedly to cycle through the available water
temperature options: (Cold Water , 20 ˚C, 30 ˚C, 40 ˚C , 60 ˚C and
95 ˚C).
4
RINSE SELECTION
BUTTON
Press this button to add additional rinse cycles. The maximum number of
rinse cycles is five.
Press the button repeatedly to cycle through the available speeds for the
spin cycle.
WF12F9E6P4*
5
SPIN SELECTION
BUTTON
,
, 400, 800, 1000, 1200, 1400 rpm
“No spin ” - The laundry remains in the drum and no spin cycle is
performed after the final drain.
“Rinse Hold
” - The laundry remains soaking in the final rinse water.
Before the laundry can be unloaded, either a Drain or Spin cycle must be
performed.
6
OPTION SELECTION
BUTTON
Press this button repeatedly to cycle through the options:
Soak  Intensive  Prewash  Soak + Intensive  Soak + Prewash 
Intensive + Prewash  Soak + Intensive + Prewash  off
“Prewash
”: Press this button to select Prewash. Prewash is only
available with: Cotton, Synthetics, Denim, Bedding, Dark Garment,
Daily Wash, Super Eco Wash, Baby Care.
“Soak
”: Use this option to effectively remove stains from your laundry
by soaking your laundry.
• The Soak function is performed 13 minutes into the wash cycle.
• The Soak function continues for 30 minutes with six cycles, where
one cycle is a soak cycle that spins for 1 minute and stands still for 4
minutes.
• The Soak function is only available for the following wash programs:
Cotton, Synthetics, Denim, Bedding, Daily Wash, Super Eco Wash,
Baby Care.
“Intensive
”: Press this button when the laundry is heavily soiled and
needs to be washed intensively. The cycle time is increased for each
cycle.
7
SMART CONTROL
Press this button to activate/deactivate the Smart Control function. When
the Smart Control function is activated, you can control your washer
using your mobile device. (For detailed information, refer to the “Setting
the Smart Control” section on page 31.)
EASY IRON
SELECTION BUTTON
Press this button to prepare your laundry so that it can be easily ironed
by reducing the wrinkles during the spin cycle.
• Easy Iron is only available for the following wash programs:
Cotton, Synthetics, Denim, Bedding, Dark Garment, Daily Wash,
Super Eco Wash, Baby Care.
• When Easy Iron is selected, you can set the spin cycle speed up
to 800 rpm. (If you select Easy Iron with a spin cycle speed set to
higher than 800 rpm, the spinning speed is automatically changed to
800 rpm.)
8
English - 22
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec5:22
2013-11-20
5:51:15
10
DELAY END
SELECTION BUTTON
Press this button repeatedly to cycle through the available Delay End
options (from 3 hours to 19 hours in one hour increments).
The hour displayed indicates the time when the wash cycle will be
finished.
11
START/PAUSE
SELECTION BUTTON
Press to pause and restart a cycle.
12
MY CYCLE
SELECTION BUTTON
Choose your favorite cycle including temperature, spin, soil level, option,
etc.
13
POWER BUTTON
Press it once to turn your washing machine on, press it again to turn
your washing machine off.
If the washing machine is left on for more than 10 minutes without any
buttons being touched, the power automatically turns off.
03 WASHING A LOAD OF LAUNDRY
9
For lightly soiled garments and less than 2 kg laundry that you require
quickly. It takes about minimum 15 minute, but can vary from the
indicated values depending on water pressure, water hardness, water
inlet temperature, room temperature, type and amount of washing and
degree of soiling, utilized detergent unbalaced load, fluctuation in the
QUICK WASH
electricity supply and extra options selected.
SELECTION BUTTON
• Press this button repeatedly to choose cycle time: 15 min  20 min
 30 min  40 min  50 min  1hr  Off
Powdered/Liquid detergent should be under 20g(for 2kg load) or
detergent may remain on the clothes.
WARNING
English - 23
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec5:23
2013-11-20
5:51:15
washing a load of laundry
Child Lock
The Child Lock function allows you to lock the buttons so that the wash cycle you’ve chosen
can’t be changed.
Activating/Deactivating
If you want to activate or deactivate the Child Lock function, press the
Temp and Rinse buttons at the same time for 3 seconds. “Child Lock
” will be lit when this feature is activated.
When the Child Lock function is activated, only the Power button
works. The Child Lock function remains on even after the power is
turned on and off or after the disconnecting and reconnecting the
power cord.
3 SEC.
Sound Off
The Sound Off function can be selected during all courses. When this function is selected, sound is
turned off for all courses. Even if the power is turned on and off repeatedly, the setting is retained.
Activating/Deactivating
If you want to activate or deactivate the Sound Off function, press
the Rinse and Spin buttons at the same time for 3 seconds. The
“Sound Off ” will be lit when this feature is activated.
3 SEC.
English - 24
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec5:24
2013-11-20
5:51:15
Smart Check
This function enables you to check the status of the washing machine using a smartphone.
Downloading the Samsung Smart Washer app
Download the Samsung Smart Washer app to your mobile phone from the Android market
(Play store) or Apple App store and install it. You can easily find it by searching for
“Samsung Smart Washer”.
Using the Smart Check function
1. Hold down the Spin and Option buttons at the same time for 3
seconds when an error occurs to run the Smart Check function.
Alternatively, the Smart Check function can be run if no button is
pressed after the washing machine is turned on.
2. The LED segments on the display panel rotate for 2 or 3 seconds
and the Smart Check code is displayed on the washing machine’s
display panel.
3. Run the Samsung Smart Washer app on your smart phone and
tap the Smart Check button.
‘Smart Check’ may be changed to ‘Smart Care’ according to the
language selection.
03 WASHING A LOAD OF LAUNDRY
The Smart Check function has been optimized for:
Galaxy S, S2, S3, S4, Note1, Note2
iPhone3GS, 4, 4S, 5
3 SEC.
4. Focus your smart phone’s camera on the Smart Check code displayed on the washing
machine’s display panel.
• If light from a light bulb, fluorescent bulb or lamp is reflected on the display panel of
the washing machine, the smart phone may not be able to easily recognize the Smart
Check code.
• If you hold the smart phone at a too wide angle relative to the front of the display panel,
it may not be able to recognize the error code. For best results, hold the smart phone
so that the front of the display panel and the smart phone are parallel or nearly parallel.
5. If it focuses correctly, the Smart Check code is automatically recognized, and the detailed
information of the status of your washing machine, the error and the countermeasures are
displayed on your smart phone.
6. If the smart phone fails to recognize the Smart Check code more than twice, please enter
the Smart Check code displayed on your washing machine’s display panel into the Samsung
Smart Washer app manually.
English - 25
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec5:25
2013-11-20
5:51:16
washing a load of laundry
Delay End
You can set the washing machine to finish your wash automatically at a later time, choosing a
delay of between 3 to 19 hours (in 1 hour increments). The hour displayed indicates the time at
which the wash will be finished.
1. Manually or automatically set your washing machine according to the type of laundry you are
washing.
2. Press the Delay End button repeatedly until the delay time is set.
3. Press the Start/Pause button. The “Delay End ” indicator will be lit, and the clock will
begin counting down until it reaches the set time.
4. To cancel a Delay End function, press the Power button and then turn the washing machine
on again.
My Cycle
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one button
convenience.
By pushing the My Cycle button, press the My Cycle button to load and use the saved
My Cycle options. The “My Cycle” light will indicate activation. Also, the chosen course and
option lights will flicker.
You can set all options as follows in the My Cycle mode.
1. Turn the water supply on.
2. Press the Power button.
3. Select cycle using the Cycle Selector.
4. After cycle selection, set each option.
See the “Cycle chart” on page 61 for available option settings with each cycle.
5. You can then store the selected cycle and options by pressing and holding the My Cycle
button for longer than 3 seconds in My Cycle mode. The cycle and options you select will be
displayed the next time you choose the My Cycle function.
You can change the My Cycle settings by repeating the same process above.
The last used setting will be displayed the next time you choose the My Cycle function.
If you press My Cycle and release it within 3 seconds, the previously saved course and
options appear. If you press and hold My Cycle for 3 second or longer, the currently set
course and options are saved and the LED blinks for 3 seconds.
English - 26
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec5:26
2013-11-20
5:51:16
Washing clothes using the cycle selector
Prewash is only available when selecting the Cotton, Synthetics, Denim, Bedding,
Dark Garment, Daily Wash, Super Eco Wash, Baby Care cycles. It is only necessary if your
clothing is heavily soiled.
7. Use the Cycle Selector to select the appropriate cycle according to the type of material:
Cotton, Synthetics, Denim, Bedding, Dark Garment, Daily Wash, Super Eco Wash,
Outdoor Care, Baby Care, Wool, Hand Wash. The relevant indicators will illuminate on the
control panel.
8. At this time, you can control the wash temperature, the amount of rinses, the spinning speed,
and the delay time by pressing the appropriate option button.
9. Press the Start/Pause button and the wash will begin. The process indicator will light up
and the remaining time for the cycle will appear in the display.
03 WASHING A LOAD OF LAUNDRY
Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control”
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Turn on your sink’s water tap.
2. Press the Power button.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling it.
5. Close the door.
6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
Both the total cycle time and the number of rinse cycles in the Cotton cycle may vary
depending on the amount of laundry.
Pause Option
Before the initial water supply is finished it is possible to add/remove laundry items.
1. press the Start/Pause button to unlock the door.
The door cannot be opened when the water is too HOT or the water level is too HIGH.
2. After closing the door, press the Start/Pause button to restart the wash.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1. Open the door.
2. Remove laundry.
English - 27
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec5:27
2013-11-20
5:51:16
washing a load of laundry
Washing clothes manually
You can wash clothes manually without using the Cycle Selector.
1. Turn the water supply on.
2. Press the Power button on the washing machine.
3. Open the door.
4. Load the articles loosely into the drum one at a time, without overfilling it.
5. Close the door.
6. Add detergent and, if necessary, softener or prewash detergent, into the appropriate
compartments.
7. Press the Temp button to select the temperature. (Cold water, 20 ˚C, 30 ˚C, 40 ˚C, 60 ˚C,
95 ˚C)
8. Press the Rinse button to select the required number of rinse cycles.
The maximum number of rinse cycles is five.
The wash duration is increased accordingly.
: No spin)
9. Press the Spin button to select the spin speed.(
10. Press the Delay End button repeatedly to cycle through the available Delay End options
(from 3 hour to 19 hours in one hour increments). The hour displayed indicates the time at
which the wash will be finished.
11. Press the Start/Pause button and the machine will begin the cycle.
LAUNDRY GUIDELINES
Follow these simple guidelines for the cleanest laundry and the most efficient wash.
Always check the Care label on clothing before washing.
Sort and wash your laundry according to the following criteria:
• Care Label: Sort laundry into cottons, mixed fibres, synthetics, silks, wools and rayons.
• Colour: Divide whites and colours. Wash new colour items separately.
• Size: Placing items of different sizes in the same load will improve the wash action.
• Sensitivity: Wash delicate items separately, using the Delicate wash cycle for pure, new
woollen items, curtains and silk articles. Check the labels on the items you are washing or
refer to the fabric care chart in the appendix.
Emptying pockets
Before each wash, empty all the pockets of your laundry. Small, irregularly shaped hard objects,
such as coins, knives, pins, and paperclips could damage your washing machine. Do not wash
clothing with large buckles, buttons, or other heavy metal objects.
Metal on clothing may damage your clothing as well as the tub. Turn clothing with buttons and
embroidered clothes inside out before washing them. If zips of pants and jackets are open while
washing, the spin basket may be damaged. Zips should be closed and fixed with a string before
washing.
Clothing with long strings may become entangled with other clothes damaging them. Be sure to
fix the strings before starting the wash.
Prewashing cotton
Your new washing machine, combined with modern detergents, will give perfect washing results,
thus saving energy, time, water and detergent. However, if your cotton is particularly dirty,
prewash with a protein-based detergent.
English - 28
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec5:28
2013-11-20
5:51:16
Determining the load capacity
Do not overload the washing machine or your laundry may not wash properly. Use the chart
below to determine the load capacity for the type of laundry you are washing.
Load Capacity
Model
WF12F9E6P4*
Cotton
12.0 kg
Synthetics
6.0 kg
Denim
3.0 kg
Bedding
2.5 kg
Outdoor Care
2.0 kg
Wool
2.0 kg
• When the laundry is unbalanced (“UE” lights up on the display), redistribute the load.
If the laundry is unbalanced, the spin efficiency may be degraded.
• When washing Bedding or Bedding cover, the wash time may be lengthened or the spin
efficiency may be degraded.
• For Bedding or Bedding cover, the recommended load capacity is 2.5 kg or less.
03 WASHING A LOAD OF LAUNDRY
Fabric Type
Make sure to insert brassieres (water washable) into a laundry net (to be
purchased additionally).
• The metal parts of the brassieres may break through the material
and damage the laundry. Therefore make sure to place them inside
a fine laundry net.
• Small, light clothing such as socks, gloves, stockings and
handkerchiefs may become caught around the door. Place them
inside a fine laundry net.
Do not wash the laundry net by itself without other laundry. This may cause abnormal
vibrations that could move the washing machine and cause an accident resulting in
injury.
DETERGENT AND ADDITIVES INFORMATION
Which detergent to use
The type of detergent you should use is based on the type of fabric (cotton, synthetic, delicate
items, wool), colour, wash temperature, and degree of soiling. Always use “low suds” laundry
detergent, which is designed for automatic washing machines.
Follow the detergent manufacturer’s recommendations based on the weight of the laundry, the
degree of soiling, and the hardness of the water in your area. If you do not know how hard your
water is, enquire at your local water authority.
Do not use detergent that has hardended or solidified as the detergent may remain in
the rinse cycle. It may cause your washing machine to not rinse properly or result in the
overflow becoming blocked.
English - 29
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec5:29
2013-11-20
5:51:17
washing a load of laundry
Detergent drawer
Your washing machine has separate compartments for dispensing detergent and fabric softener.
Add all laundry additives to the correct compartment before starting your washing machine.
Do not open the detergent drawer while your washing machine is running or you might be
exposed to hot water or steam.
1. Pull out the detergent drawer on the left side of the control panel.
2. Add the recommended amount of laundry detergent directly
into the detergent compartment
before starting your
washing machine.
To use liquid detergent, use the liquid detergent box (refer to
“Liquid Detergent” for the corresponding model).
• Do not add powdered detergent into the liquid detergent box.
3. Add the recommended amount of fabric softener into the
softener compartment
if required. DO NOT exceed the MAX
FILL ( ) line.
Do NOT add any powder/liquid detergent to the softener
).
CAUTION compartment (
4. When using the Prewash option, add the recommended
amount of laundry detergent into the prewash compartment
.
When washing large items do NOT use the following
detergent types.
• Tablet and capsule type detergents
• Detergents using a ball and net
Concentrated or thick fabric softener and conditioner must
be diluted with a little water before being poured into the
dispenser (prevents the overflow from becoming blocked).
MAX
Be careful that the fabric softener does not overflow, when you close the detergent drawer
after adding fabric softener into the rinse detergent compartment.
Liquid Detergent (Selected models)
To use liquid detergent, place the liquid detergent box into the main wash section of the
detergent drawer and pour liquid detergent into the liquid detergent box.
• Do not fill above the MAX line.
Liquid
• When using powdered detergent, remove the liquid
detergent box
detergent box from the detergent drawer. Powdered
detergent will not dispense with liquid detergent box.
• After a wash, some liquid may remain in the detergent
drawer.
English - 30
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec5:30
2013-11-20
5:51:17
smart control
SETTING THE SMART CONTROL
Connect a wired/wireless router and the washer through a wireless connection, connect to www.
samsungsmartappliance.com and register the washer to the Smart Control service.
This product does not contain a wireless router.
•
•
•
•
•
This product supports DHCP (Dynamic Host Configuration Protocol). Therefore, if a user
wants to use an existing wired/wireless router, the router’s DHCP server function must be
enabled.
Set the channel for the connection with the wired/wireless router to a channel that is not
being used.
This washer only supports OPEN, WPA/TKIP and WPA2/AES modes. If the wireless router
is set to a mode other than these three modes, the washer may not connect to it. We
recommend that you use WPA2/AES for 802.11n.
The quality of the wireless network may be affected by the surrounding environment.
If your Internet service provider has registered and fixed the MAC address (unique
identification number of a device) of the user’s PC or modem, you may not be able to
connect the washer to the Internet. Please ask your Internet service provider about the
procedures to connect a device (e.g. washer) other than a computer to the Internet. If your
Internet service provider requires an ID and password to connect to the Internet, you may
not be able to connect the washer to the Internet. In this case, you have to enter the ID and
password to connect to the Internet.
You may not be able to connect to the Internet due to a firewall. In this case, ask your
Internet service provider for assistance.If you cannot connect the washer to the Internet even
after contacting your Internet service provider, please contact a Samsung Electronics dealer
or service center.
04 SMART CONTROL
Configuring the wired/wireless router
Check before installation
•
•
•
•
For the procedures to install a normal wired/wireless router, refer
to the user manual of the corresponding wired/wireless router.
Samsung washers only support Wi-Fi 2.4Ghz.
The Samsung washer supports the wireless communication
standard IEEE802.11 b/g/n (2.4 GHz).
A certified wireless router has the Wi-Fi CERTIFIED logo on its
packaging or user manual.
English - 31
ARNO-WIFI_F900E-03285E_EN_131120.indd 31
2013-11-20
5:51:17
smart control
SETTING THE NETWORK (ANDROID)
The application screen shown in this manual may differ from the screen on your mobile device.
1. Touch and bring up the applications menu on your phone. Then find
and open the “Play Store” icon.
2. Once the “Play Store” has been open, do a search.
3. Once the search box appears type in
“Samsung Smart Washer”.
English - 32
ARNO-WIFI_F900E-03285E_EN_131120.indd 32
2013-11-20
5:51:18
4. Once the search is complete the App
“Samsung Smart Washer” will be displayed.
You need to download this App to your phone.
04 SMART CONTROL
Make sure the app changes from “Free” to
“Installed”
5. Once the phone app has been downloaded to your phone, you are
now ready to set up the washer Wi-Fi control.
6. Press the “Settings” icon. Once the settings
menu appears press the wireless and network
section.
English - 33
ARNO-WIFI_F900E-03285E_EN_131120.indd 33
2013-11-20
5:51:18
smart control
7. After selecting the wireless and network select
Wi-Fi setting. Then turn on the Wi-Fi.
8. Once the list of available networks appears,
select the network to be used and enter the
password if necessary.
9. Once you are connected to the selected
network go back to the applications screen
on your mobile phone. Once you are in the
phones application screen touch the Samsung
icon “Samsung Smart Washer” that was
downloaded at the beginning of this process.
English - 34
ARNO-WIFI_F900E-03285E_EN_131120.indd 34
2013-11-20
5:51:18
10. After opening the Samsung app,
select “Select a Country” and then
“Connection setup”.
04 SMART CONTROL
11. You need to first press the Power button to
activate the your machine. You can activate the
machine to any wash cycle.
12. Simultaneously hold down the Smart Control
+ Delay End buttons for 5 seconds. The
‘Wi-Fi’ indicator blinks for approximately 60 ~
90 seconds. After the indicator stops blinking,
proceed to the next step.
13. After you activate the machine, press the
Temp + Start/Pause buttons simultaneously
for 5 seconds. Then the “AP” menu appears on
the LED screen.
English - 35
ARNO-WIFI_F900E-03285E_EN_131120.indd 35
2013-11-20
5:51:18
smart control
14. After the AP menu appears on the LED
screen, press the Start/Pause button. Once
the Start/Pause button is pressed the “AP”
displayed on the LED screen should start to
blink.
If the you press the Start/Pause and the “AP”
doesn’t blink try again after a moment.
15. Once the mobile app is open select the
“Setting Start” key.
The Wi-Fi indicator will blink on & off
on the phone several times.
If the “FAP” code appears on the display
panel, press the Start/Pause button and
restart from Step 14.
16. Once the unit starts connecting the phone will
load the AP list. When the AP list is loaded you
need to select the network.
Please make sure the app and smart phone
are connected to the same network/wireless
AP.
17. After selecting the network you need to enter
your password. Once you enter your password
select “Connect”. The unit start setting up the
network. This process delivers the connection
information of the “AP” that is connected to the
mobile phone to the product.
English - 36
ARNO-WIFI_F900E-03285E_EN_131120.indd 36
2013-11-20
5:51:19
04 SMART CONTROL
18. The ‘oAP’ code appears on the display
panel of the washing machine and the
“Transfer complete” message appears on the
mobile app.
The phone is now connected to the machine
through the network.
If the “FAP” code appears on the display
panel, press the Start/Pause button and
restart from Step 14.
19. After the phone is connected to the machine,
press the Temp + Start/Pause buttons
simultaneously for 5 seconds. Then the original
wash cycle will be displayed on the LED
screen.
20. After the wash cycle has been displayed wait
approximately 1 minute. You will then see the
Smart Control icon start to blink.
When done, go to page 46.
English - 37
ARNO-WIFI_F900E-03285E_EN_131120.indd 37
2013-11-20
5:51:19
smart control
SETTING THE NETWORK (IOS)
The application screen shown in this manual may differ from the screen on your mobile device.
1. Find and open the “App Store” icon.
2. Once the “App Store” has been open, do a search.
3. Once the search box appears type in
“Samsung Smart Washer”.
English - 38
ARNO-WIFI_F900E-03285E_EN_131120.indd 38
2013-11-20
5:51:20
4. Once the search is complete the App
“Samsung Smart Washer” will be displayed.
You need to download this App to your phone.
04 SMART CONTROL
Make sure the app changes from “Free” to
“Installed”
5. Once the phone app has been downloaded to your phone, you
are now ready to set up the washer Wi-Fi control.
6. You need to first press the Power button to
activate the your machine. You can activate the
machine to any wash cycle.
7. Simultaneously hold down the Smart Control
+ Delay End buttons for 5 seconds. The
‘Wi-Fi’ indicator blinks for approximately 60 ~
90 seconds. After the indicator stops blinking,
proceed to the next step.
English - 39
ARNO-WIFI_F900E-03285E_EN_131120.indd 39
2013-11-20
5:51:20
smart control
8. After you activate the machine, press the
Temp + Start/Pause buttons simultaneously
for 5 seconds. Then the “AP” menu appears on
the LED screen.
9. After the AP menu appears on the LED
screen, press the Start/Pause button. Once
the Start/Pause button is pressed the “AP”
displayed on the LED screen should start to
blink.
If the you press the Start/Pause and the “AP”
doesn’t blink try again after a moment.
10. Press the “Settings” icon. Once the settings
menu appears press the Wi-Fi icon.
11. You can see “SMARTWASHER” in the Wi-Fi
list. Select the SMARTWASHER and input the
password (WASHER2012).
You have to input as Capital.
After typing the password, select the join
button.
English - 40
ARNO-WIFI_F900E-03285E_EN_131120.indd 40
2013-11-20
5:51:21
04 SMART CONTROL
12. Once you are connected to the selected
network go back to the applications screen
on your mobile phone. Once you are in the
phones application screen touch the Samsung
icon “Samsung Smart Washer” that was
downloaded at the beginning of this process.
13. After opening the Samsung app, select “Connection setup”.
14. Tap the “Setting Start” and input your SSID,
Authentication Type, Encryption Type,
password of AP.
This process delivers the connection
information of the “AP” that is connected to the
mobile phone to the product.
Check the security option of the router and
then set the wireless network configuration
again as below.
-
select the Security mode : WPA and
Encryption:TKIP
select the Security mode : WPA2 and
Encryption:AES
refer to wireless router manual for the
security option of the wireless router.
English - 41
ARNO-WIFI_F900E-03285E_EN_131120.indd 41
2013-11-20
5:51:21
smart control
15. The ‘oAP’ code appears on the display
panel of the washing machine and the
“Transfer complete” message appears on the
mobile app.
16. After the phone is connected to the machine,
press the Temp + Start/Pause buttons
simultaneously for 5 seconds. After 5 seconds
the original wash cycle will be displayed on the
LED screen.
17. After the wash cycle has been displayed wait
approximately 1 minute. You will then see the
Smart Control icon start to blink.
18. Connect to the AP, which is connected with the washing machine, on
your mobile.
The phone is now connected to the washing machine through the
network.
When done, go to page 46.
English - 42
ARNO-WIFI_F900E-03285E_EN_131120.indd 42
2013-11-20
5:51:22
CONNECTING TO THE NETWORK USING THE WPS SETTINGS (FOR
WPS-ENABLED ROUTERS ONLY)
1. Turn the washing machine on.
2. Simultaneously hold down the Smart Control +
Delay End buttons for 5 seconds to turn on Wi-Fi. When
Wi-Fi is turned on, the ‘Wi-Fi’ indicator will light up.
3. Press and hold both the Temp + Start/Pause buttons for
5 seconds.
4. Turn the Cycle Selector until “UP” is displayed on the
display panel and press the Start/Pause button.
04 SMART CONTROL
• Samsung washers use PBC as the WPS type. Check if the current wired/wireless router
supports Wi-Fi Protected Setup™(WPS).
• Check if the wired/wireless share has a WPS button.
5. Press and hold the WPS button of the wired/wireless router
that will be connected with the washer for 120 seconds
or less to run the WPS function of the wired/wireless
router. If the WPS function runs, the wired/wireless router
automatically fetches the necessary information from the
washer and the washer is automatically connected to the
Internet through the wired/wireless router.
6. When the WPS setting is complete, “OUP” will appear on the display.
If the connection is not established within 5 minutes, “FUP” is displayed on the display
panel.
CAUTION
• How to use the WPS function of the wired/wireless router may differ depending on
the manufacturer. Refer to the user manual of the corresponding wired/wireless
router.
• Even after the WPS setup is complete, it may take some time until the actual
connection is established to allocate an IP address through DHCP (up to 5 minutes).
• Note that if you use a wired/wireless router that is not WPS-certified, the washer may
not be connected through Wi-Fi or a device that was connected to the wired/wireless
router may be disconnected.
• Please note that for some wired/wireless routers, if you press and hold the WPS
button for some time, the settings of the router may be reset.
7. Press the Temp + Start/Pause buttons simultaneously for 5
seconds. Then the original wash cycle will be displayed on the LED
screen.
8. After the wash cycle has been displayed wait approximately 1 minute.
You will then see the Smart Control icon start to blink.
English - 43
ARNO-WIFI_F900E-03285E_EN_131120.indd 43
2013-11-20
5:51:22
smart control
INDOOR CONTROL
Quick authentication (recommended)
1. The “Authentication” only needs to be run with
the initial setup. Touch the “Indoor control” tab
to search for the washer’s name. Once the
washer’s name is displayed touch tab.
2. After you touch the washer name tab you need to touch the “OK” tab
to proceed with the certification.
3. After you touch the confirm tab you will now start preparing the
certification.
English - 44
ARNO-WIFI_F900E-03285E_EN_131120.indd 44
2013-11-20
5:51:23
4. Follow the instructions displayed on the phone to start the washer
setup.
The waiting time for authentication is 20 seconds.
Perform step 5 below within 20 seconds.
04 SMART CONTROL
5. Press the Smart Control button.
If the lamp on the Smart Control button is on, press
the Smart Control button once to turn it off. After
waiting for 3 seconds, press the button again.
6. The washer is now connected. Touch the Course button and you can
now control the washer from your phone.
English - 45
ARNO-WIFI_F900E-03285E_EN_131120.indd 45
2013-11-20
5:51:23
smart control
Authentication (if the quick authentication method fails)
1. The “Authentication” only needs to be run with
the initial setup. Touch the “Indoor control” tab
to search for the washer’s name. Once the
washer’s name is displayed touch tab.
2. Verify the that the Wi-Fi icon is not blinking.
Press the Temp + Start/Pause buttons
simultaneously for 5 seconds. “AP” will now be
displayed.
3. After you touch the washer name tab you need to touch the “OK” tab
to proceed with the certification.
English - 46
ARNO-WIFI_F900E-03285E_EN_131120.indd 46
2013-11-20
5:51:23
4. After you touch the confirm tab you will now start preparing the
certification.
04 SMART CONTROL
5. Follow the instructions displayed on the phone to start the washer
setup.
The waiting time for authentication is 20 seconds.
Perform step 6 below within 20 seconds.
6. Once the “AP” is displayed you need to turn the knob counter
clockwise until “PS” is displayed. After the “PS” is displayed press the
Start/Pause button.
English - 47
ARNO-WIFI_F900E-03285E_EN_131120.indd 47
2013-11-20
5:51:24
smart control
7. Once the Start/Pause button is pressed the “PS” will start to blink.
Once it starts blinking the phone will automatically start to connect.
8. After the “PS” is displayed, press the Temp + Start/Pause buttons
simultaneously for 5 seconds. Please wait until the Smart Control
Enabled icon [ ] starts blinking. If the Smart Control enabled icon
starts blinking, press Smart Control button to activate the Smart
Control. If the Smart Control is enabled, the Smart Control enabled
icon [ ] is turned on.
9. Press the washer name tab to connect to the washer.
The washer is now connected. Touch the Course button and you can
now control the washer from your phone.
Check if the ‘Smart Control’ indicator turns on. If it turns on,
the Smart Control function is activated. If it turns off, press the
Smart Control button to activate the Smart Control function.
English - 48
ARNO-WIFI_F900E-03285E_EN_131120.indd 48
2013-11-20
5:51:24
Using the mobile app
2. After you touch the
“Samsung Smart
Washer” icon the will
search for the washer.
Once the phone
connects the washer,
the washer’s name, or
“MAC” will appear. Now
touch the washer name.
04 SMART CONTROL
1. Make sure that the ‘Wi-Fi’ indicator is on.
Then press the Smart Control button to
activate the Smart Control function. When
this function is activated, the ’Smart Control’
indicator will light up.
Now press the “Samsung Smart Washer”
icon.
1. If you try to activate the Smart Control
function while the door is open, the
function will be activated at first, but it will
be automatically deactivated in a minute.
MAC address
3. Once the connection is established, touch the
“Course button”. The unit should display the
“Option Pop-up” screen. Once Choose Cycle
screen is displayed touch the “Start” tab at the
bottom.
English - 49
ARNO-WIFI_F900E-03285E_EN_131120.indd 49
2013-11-20
5:51:24
smart control
4. Now touch the “Start”
button and activate the
wash cycle. You can
monitor the wash cycle
to check the status
of the cycle. Once
the cycle is finished
the phone will display
“Cycle completes”.
For iPhones, you need to run the Outdoor control function in the app first to authenticate
the Push Notification service after registering your washer to the Samsung Smart appliance
(www.samsungsmartappliance.com) website.
English - 50
ARNO-WIFI_F900E-03285E_EN_131120.indd 50
2013-11-20
5:51:25
OUTDOOR CONTROL
Registering your washer
04 SMART CONTROL
1. Access Samsung Smart appliance
website.
(http://www.samsungsmartappliance.com)
2. Enter the User ID and Password to log in.
If you don’t have an account, press
“Create a Samsung account” and fill in
the form to become a member.
3. Select “My page”  “My page”.
4. Select “Add device”.
5. After entering the MAC written from
following instruction. (Washing Machine)
1) Press and hold both the Temp, and
Start/Pause buttons for 5 seconds.
2) Turn the Cycle Selector until “Ad” is
displayed on the display panel and
press the Start/Pause button.
3) Find out 12 Hexadecimal Address,
pressing Start/Pause buttons for 2
digit & text.
English - 51
ARNO-WIFI_F900E-03285E_EN_131120.indd 51
2013-11-20
5:51:25
smart control
You can find it on your mobile app. (Refer to No.2 on page 51.)
6. Tap the ‘Washers/Dryers’ tab and enter the mac address. (Web)
7. Click the “Certify device”. (Web)
8. Turn the Cycle Selector until “PS” is displayed on the display panel and press the
Start/Pause button. (Washing Machine)
9. When certify device checking window comes on, click the “Ok”. (Web)
• If the washer you are registering is already registered by other users, a window will come
on asking whether you want to delete the usage authority of the existing users, or not.
10. After the registration of the washer is
completed, you can check the registered
washer on the device information list.
English - 52
ARNO-WIFI_F900E-03285E_EN_131120.indd 52
2013-11-20
5:51:25
Using the mobile app
Register the appliance on the Samsung Smart Appliance website first to control the washing
machine using the outdoor control function.
04 SMART CONTROL
1. Press the Smart Control
button.
2. Tap the
“Outdoor control” tab.
3. Enter the ID and
password registered to
the website and tap the
Login button.
4. After logging in, the
model number of the
registered washing
machine appears in the
appliance list.
5. Select the model you want to control to
connect to the appliance.
6. Now you can use the Outdoor control function
for the washing machine.
Hereby, Samsung Electronics, declares that this washing machine is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
The official Declaration of conformity may be found at http://www.samsung.com, go to
Support > Search Product Support and enter the model name.
This equipment may be operated in all EU countries.
In France, this equipment may only be used indoors.
English - 53
ARNO-WIFI_F900E-03285E_EN_131120.indd 53
2013-11-20
5:51:25
cleaning and maintaining your
washing machine
Keeping your washing machine clean improves its performance, wards off
unnecessary repairs, and lengthens its life.
ECO DRUM CLEAN
This course is a self-cleaning course that removes mold that may occur inside the washing machine.
1. Press the Power button.
2. Turn the Cycle Selector to the Eco Drum Clean course.
• You can only use the Delay End function.
• The water temperature during the Eco Drum Clean is set
to 70 ˚C.
You cannot change the temperature.
3. Place the appropriate amount of cleansing agent into the
and close the detergent drawer
detergent compartment
(when cleaning the drum using a cleansing agent).
• Be sure to use the recommended cleansing agent for
cleaning the drum.
• There are powder-type and liquid-type drum cleansing
agents. The liquid-type cleaning agent is only available
with liquid detergent box (option).
4. Press the Start/Pause button.
• If you press the Start/Pause button, the Eco Drum Clean course begins.
CAUTION
•
•
•
•
•
•
•
Using the Eco Drum Clean course, you can clean the drum without using a cleansing agent.
Never use the Eco Drum Clean course when laundry is in the washing machine. This may
result in damage to the texture or a problem with the washing machine.
In the Eco Drum Clean course, never use normal detergent.
Use only 1/10 of the amount of the drum cleansing agent recommended by the
cleansing agent manufacturer.
Since using a chlorine bleaching agent may discolour the product, be sure to use only
oxygen bleaching agents.
Powder-type cleansing agent: Use a [powder-type bleaching agent] or a [cleansing agent for
drum cleaning only].
Liquid-type cleansing agent: Use a [liquid-type oxygen bleaching agent] or a [cleansing agent
for drum cleaning only].
English - 54
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec6:54
2013-11-20
5:51:26
05 CLEANING AND MAINTAINING
The Eco Drum Clean Auto Alarm Function
• If the “Eco Drum Clean” indicator on the display and the lamp on
the Cycle Selector are lit after a wash, it indicates that tub (drum)
cleaning is required. In this case, remove the laundry from the washing
machine, turn the power on, and clean the drum by performing the
Eco Drum Clean course.
• If you do not perform the Eco Drum Clean course, the
“Eco Drum Clean” indicator on the display and the lamp on the Cycle
Selector are turned off. However, the “Eco Drum Clean” indicator on
the display and the lamp on the Cycle Selector are turned on again
after two washes are performed. However, this will not result in a
problem with the washing machine.
• Although generally, the Eco Drum Clean Auto Alarm appears once a
month or so, the frequency may differ depending on the number of
times the washing machine is used.
• In case of the alarm, please also clean the debris filter (refer to “Cleaning the debris filter”
section on page 56). Otherwise the performance of the bubble function may lower down.
DRAINING THE WASHING MACHINE IN AN EMERGENCY
If there is a power outage, drain all remaining water before removing your laundry.
1. Unplug the washing machine from the power supply.
2. Open the fi lter cover by using a coin or key.
Filter cover
3. Open the emergency drain cap by pulling it.
Emergency
drain cap
4. Hold the cap on the end of the emergency drain tube and
slowly pull it out.
5. Allow all the water to flow into a bowl.
Remain water maybe more than you expected. Prepare
larger bowl.
Emergency
drain tube
6. Reinsert the emergency drain cap and the drain tube.
7. Replace the filter-cover.
English - 55
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec6:55
2013-11-20
5:51:26
cleaning and maintaining your
washing machine
CLEANING THE DEBRIS FILTER
We recommend cleaning the debris filter 5 or 6 times a year, or when the error message of “5E” is
displayed. (Refer to “Draining the washing machine in an emergency” in the previous section.)
If foreign substances accumulate debris filter, the performance of the bubble function will be degraded.
Before cleaning the debris filter, make sure to unplug the power cord.
CAUTION
1. Remove the remaining water first (refer to “Draining the
washing machine in an emergency” on page 55.)
If you separate the filter without draining the remaining
water, the remaining water may trickle out.
2. Open the filter cover by using a key or coin.
3. Unscrew the emergency drain cap by turning it to the left
and drain off all the water.
4. Unscrew the debris filter cap.
Debris filter cap
5. Wash any dirt or other material from the debris filter. Make
sure the drain pump propeller behind the debris filter is not
blocked.
6. Replace the debris filter cap.
7. Replace the filter cover.
CAUTION
Do not open the debris filter cap while the machine is running or hot
water may flow out.
•
Make sure to replace the filter cap after the filter cleaning. If the filter is out of the machine, your
washing machine may malfunction or leak water.
•
The filter should be fully assembled after the filter cleaning.
For models with the safety filter cap
• To open, push in, and then turn the safety filter cap counterclockwise.
The spring in the cap will make opening the cap easy.
• To close, turn the safety filter cap clockwise. As you turn the cap, the
spring will make a rattling sound. The rattling sound is normal.
CLEANING THE EXTERIOR
1. Wipe the washing machine surfaces, including the control panel, with a soft cloth using a
nonabrasive household detergent.
2. Use a soft cloth to dry the surfaces.
3. Do not pour water onto the washing machine.
English - 56
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec6:56
2013-11-20
5:51:27
CLEANING THE DETERGENT DRAWER AND DRAWER RECESS
Release lever
liquid detergent box (Option)
Softener divider
05 CLEANING AND MAINTAINING
1. Press the release lever on the inside of the
detergent drawer and pull the drawer out.
2. Remove the softener divider and the liquid
detergent box (option) from the detergent
drawer.
3. Wash all parts under running water.
4. Clean the drawer recess with an old toothbrush.
5. Replace the softener divider and the liquid detergent box
(option) by pushing it firmly into the drawer.
6. Push the drawer back into place.
7. To remove any remaining detergent, perform a rinse cycle
without any laundry in the drum.
CLEANING THE WATER HOSE MESH FILTER
You should clean the water hose mesh filter at least once a year, or when the error message of “4E” is
displayed:
1. Turn off the water supply to the washing machine.
2. Unscrew the hose from the back of the washing machine. To prevent water from gushing out
due to the air pressure in the hose, cover the hose with a cloth.
3. Gently pull out the mesh filter from the end of the hose using a pair of pliers and rinse it under
water until clean. Also clean inside and outside the threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Make sure the connections are watertight and turn on the tap.
English - 57
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec6:57
2013-11-20
5:51:27
cleaning and maintaining your
washing machine
REPAIRING A FROZEN WASHING MACHINE
If the temperature drops below freezing and your washing machine is frozen:
1.
2.
3.
4.
5.
Unplug the washing machine.
Pour warm water over the tap to loosen the water supply hose.
Remove the water supply hose and soak it in warm water.
Pour warm water into the washing machine drum and let it sit for 10 minutes.
Reconnect the water supply hose to the water tap and check if the water supply and drain
are operating normal.
STORING YOUR WASHING MACHINE
If you need to store your washing machine for an extended time, it’s better to drain and disconnect it.
Washing machines can be damaged if water is left in the hoses and internal components before storage.
1. Select the Cotton cycle and push the Quick Wash button and run your washing machine
through the cycle without a load.
2. Turn the water taps off and disconnect the inlet hoses.
3. Unplug your washing machine from the electrical outlet, and leave your washing machine
door open to allow air to circulate inside the tumbler.
If your washing machine has been stored in below-freezing temperatures, allow time for any
leftover water in your washing machine to thaw out before using it.
English - 58
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec6:58
2013-11-20
5:51:28
troubleshooting and
information codes
CHECK THESE POINTS IF YOUR WASHING MACHINE...
06 TROUBLESHOOTING
PROBLEM
SOLUTION
Will not start
•
•
•
•
Make sure your washing machine is plugged in.
Make sure the door is firmly closed.
Make sure the water source tap(s) are turned on.
Make sure to press the Start/Pause button.
Has no water or not enough
water
•
•
•
•
Turn the water tap on fully.
Make sure the water source hose is not frozen.
Straighten the water intake hoses.
Clean the filter on the water intake hose.
Has detergent remaining in
the detergent drawer after
the wash cycle is complete
•
Make sure your washing machine is running with sufficient water
pressure.
Make sure the detergent is added to the center of the detergent
drawer.
Vibrates or is too noisy
•
•
•
•
•
Make sure your washing machine is on a level surface. If the surface
is not level, adjust the washing machine feet to level the appliance.
Make sure that the shipping bolts are removed.
Make sure your washing machine is not touching any other object.
Make sure the laundry load is balanced.
The washing machine does
not drain and/or spin
•
•
Straighten the drain hose. Eliminate kinked hoses.
Make sure the debris filter is not clogged.
Door is locked shut or will
not open.
•
The door will not open until 3 minutes after the machine stops or the
power turns off.
If the problem persists, contact your local Samsung Customer Service.
English - 59
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec11:59
2013-11-20
5:51:28
troubleshooting and
information codes
INFORMATION CODES
If your washing machine malfunctions, you may see an information code on the display. If this happens,
please check the table below and try the suggested solution before calling Customer Service.
CODE SYMBOL
SOLUTION
dE
•
•
Make sure the door is firmly closed.
Make sure that laundry is not caught in the door.
4E
•
•
•
Make sure the source water tap is turned on.
Check the water pressure.
Clean the mesh filters of water hose.
5E
•
•
•
Clean the debris filter.
Make sure the drainage hose is installed correctly.
Clean the water hose mesh filter.
•
The laundry load is unbalanced. Redistribute the load. If only one item
of clothing needs washing, such as a bathrobe or pair of jeans, the
final spin result might be unsatisfactory and an “UE” error message
will be shown in the display window.
•
Call the after-sales service.
UE
cE/3E/Uc
For any codes not listed above, or if the suggested solution doesn’t fix the problem, call your Samsung
Service Centre or local Samsung dealer.
English - 60
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec11:60
2013-11-20
5:51:28
cycle chart
CYCLE CHART
( user option)
DETERGENT
PROGRAM
Spin Speed(MAX) rpm
Prewash
Softener
Max Temp
(˚C)
WF12F9E6P4*
Cotton
12.0

yes

95
1400
Synthetics
6.0

yes

60
1200
Denim
3.0

yes

60
800
Bedding
2.5

yes

40
800
Dark Garment
6.0

yes

40
1200
Daily Wash
4.0

yes

60
1400
Eco Drum Clean
-
-
-
-
70
400
Super Eco Wash
6.0

yes

40
1200
Outdoor Care
2.0
-
yes

40
1200
Baby Care
6.0

yes

95
1400
Wool
2.0
-
yes

40
800
Hand Wash
2.0
-
yes

40
400
PROGRAM
Delay End
Easy Iron
Intensive
Soak
Quick Wash
Cotton





Synthetics




-
Denim




-
Bedding




-
Dark Garment



-
-
Daily Wash




-
Eco Drum Clean

-
-
-
-
Super Eco Wash




-
Outdoor Care

-
-
-
-
Baby Care




-
Wool

-
-
-
-
Hand Wash

-
-
-
-
07 CYCLE CHART
wash
Max load(kg)
1. A cycle with a prewash takes approx. 17 minutes longer.
2. The cycle duration data has been measured under the conditions specified in Standard IEC60456/
EN60456.
Please run Calibration Mode after the installation (see page 19).
3. Daily Wash : Short program for test institutes.
4. Since this washing machine comes with the Last Memory function, to remove the Last Memory setting
and use the original startup settings, you need to clear the last used setting on the control panel. (For
information on how to clear the last used setting, refer to the descriptions about the “Last Memory
function” on page 20.)
5. Course time in individual homes may differ from the values given in the table due to variations in the
pressure and temperature of the water supply, the load and the type of laundry.
6. When the Intensive Wash function is selected, the cycle time is increased for each cycle.
English - 61
ARNO-WIFI_F900E-03285E_EN_131120.indd Sec9:61
2013-11-20
5:51:28
appendix
FABRIC CARE CHART
The following symbols provide garment care directions. The care labels include four symbols in this order:
washing, bleaching, drying and ironing (and dry cleaning when necessary). The use of symbols ensures
consistency among garment manufacturers of domestic and imported items. Follow the care label
directions to maximize garment life and reduce laundry problems.
Resistant material
Can be ironed at 100 ˚C max
Delicate fabric
Do not iron
Item may be washed at 95 ˚C
Can be dry cleaned using any
solvent
Item may be washed at 60 ˚C
Dry clean with perchloride, lighter
fuel, pure alcohol or R113 only
Item may be washed at 40 ˚C
Dry clean with aviation fuel, pure
alcohol or R113 only
Item may be washed at 30 ˚C
Do not dry clean
Item may be hand washed
Dry flat
Dry clean only
Can be hung to dry
Can be bleached in cold water
Dry on clothes hanger
Do not bleach
Tumble dry, normal heat
Can be ironed at 200 ˚C max
Tumble dry, reduced heat
Can be ironed at 150 ˚C max
Do not tumble dry
PROTECTING THE ENVIRONMENT
•
•
•
•
This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance,
please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be
connected to a power source. Remove the door so that animals and small children cannot get trapped
inside the appliance.
Do not exceed the detergent quantities recommended in the detergent manufactures’ instructions.
Use stain removal products and bleaches before the wash cycle only when strictly necessary.
Save water and electricity by only washing full loads (the exact amount depends upon the program
used).
DECLARATION OF CONFORMITY
This appliance complies with European safety standards, EC directive 93/68 and EN Standard 60335.
English - 62
ARNO-WIFI_F900E-03285E_EN_131120.indd 62
2013-11-20
5:51:28
SHEET OF HOUSEHOLD WASHING MACHINES (EU ONLY)
According to Regulation (EU) No. 1061/2010
Samsung
Model Name
WF12F9E6P4*
kg
08 APPENDIX
Capacity
12
Energy Efficiency
A+++ (highest efficiency) to D (least efficient)
A+++
Energy Consumption
Annual Energy Consumption (AE_C)1)
kWh/yr
198
Energy consumption (E_t.60) Cotton 60 ˚C at full load
kWh
1.06
Energy consumption (E_t.60.1/2) Cotton 60 ˚C with partial load
kWh
0.87
Energy consumption (E_t.40.1/2) Cotton 40 ˚C with partial load
kWh
0.62
W
0.48
Weighted power off-mode (P_o)
Weighted Power in left-on mode (P_l)
Annual water consumption (AW_c)2)
W
5
L/yr
12100
rpm
1400
Spin efficiency class3)
A (most efficient) to G (least efficient)
B
Maximum Spin Speed
Residual moisture
%
53
Cotton 60 ˚C and 40 ˚C + Intensive4)
Programs to which the information on the label and the sheet relate
Program duration of the standard program
Cotton 60 ˚C at full load
min
244
Cotton 60 ˚C for partial load
min
216
Cotton 40 ˚C with partial load
min
176
Weighted time in left-on mode
min
2
Wash
dB (A) re 1 pW
52
Spin
dB (A) re 1 pW
72
Airborne noise emissions
Dimensions
Unit dimensions
Height
mm
850
Width
mm
600
Depth5)
mm
600
Net weight
kg
71
Gross weight
kg
74
Package weight
kg
3
Water Pressure
kPa
50-800
Electrical connection
Voltage
V
220-240
Power consumption
W
2000-2400
Frequency
Hz
50
Samsung Electronics Co., Ltd. 129,
Samsung-ro, Yeongtong-gu, Suwonsi, Gyunggi-do, Korea
Name and address of company
English - 63
ARNO-WIFI_F900E-03285E_EN_131120.indd 63
2013-11-20
5:51:29
appendix
1. Annual energy consumption is based on 220 standard washing cycles for cotton programs at
60 °C and 40 °C at full and partial load, and the consumption of off and left-on modes. Actual
energy consumption will depend on how the appliance is used.
2. Annual water consumption is based on 220 standard washing cycles for cotton programs at 60 °C
and 40 °C at full and partial load. Actual water consumption will depend on how the appliance is
used.
3. Spin extraction is very important when you use a clothes dryer to dry your clothes.
The energy for drying costs much higher than the energy for washing.
Wasing with the high spin saves more energy in drying your clothes in a clothes dryer.
4. The ‘standard cotton 60 °C program’ and ‘standard cotton 40 °C program’, which can be selected
by adding the Intensive option to the cotton 60 °C and cotton 40 °C program, are suitable to
clean normally soiled cotton laundry and they are the most efficient (concerning water and energy
consumption) for this type of laundry.
Please run Calibration Mode after the installation (see page 19).
In these programs the actual water temperature may differ from the declared temperature.
5. Distance to the wall from the unit is not included in the depth dimension.
INFORMATION OF MAIN WASHING PROGRAMMES
Model
Course
Cotton
WF12F9E6U4W
Cotton + Intensive
Synthetics
Temp (°C)
Capacity
(kg)
Program Time
(min)
Residual
Moisture
Content (%)
Water
Consumption
(ℓ/cycle)
Energy
Consumption
(kWh/Cycle)
20
6
129
56
85
0.35
40
6
176
53
47
0.62
60
40
6
216
53
47
0.87
12
244
53
65
1.06
6
138
35
75
1.06
English - 64
ARNO-WIFI_F900E-03285E_EN_131120.indd 64
2013-11-20
5:51:29
OPEN SOURCE ANNOUNCEMENT
The software included in this product contains copyrighted software that is licensed under the GPL/LGPL.
You may obtain the complete Corresponding Source code from us for a period of three years after our last
shipment of this product by sending email to:
If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM,
the cost of physically performing source distribution may be charged.
This offer is valid to anyone in receipt of this information.
08 APPENDIX
oss.request@samsung.com
GPL Software:
Bridge-Utils, BusyBox, DNRD, dosfstools, iproute2, IPTables, Linux Kernel, ntpclient, Open1x, RSDK
toolchain, rtl819x - Bootloader, samba, squashfs, udhcp Server-Client Package, USB-ModeSwitch,
wireless-tools
LGPL Software:
libnl-Netlink Library, Mini-XML
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not
allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change
it. By contrast, the GNU General Public License is intended to guarantee your freedom to share
and change free software--to make sure the software is free for all its users. This General Public
License applies to most of the Free Software Foundation’s software and to any other program
whose authors commit to using it. (Some other Free Software Foundation software is covered by
the GNU Lesser General Public License instead.)
You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public
Licenses are designed to make sure that you have the freedom to distribute copies of free
software (and charge for this service if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new free programs; and that you
know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights
or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you
if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must
give the recipients all the rights that you have. You must make sure that they, too, receive or can
get the source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license
which gives you legal permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands
that there is no warranty for this free software. If the software is modified by someone else and
passed on, we want its recipients to know that what they have is not the original, so that any
problems introduced by others will not reflect on the original authors’ reputations.
English - 65
ARNO-WIFI_F900E-03285E_EN_131120.indd 65
2013-11-20
5:51:29
appendix
Finally, any free program is threatened constantly by software patents. We wish to avoid the
danger that redistributors of a free program will individually obtain patent licenses, in effect
making the program proprietary. To prevent this, we have made it clear that any patent must be
licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
1. This License applies to any program or other work which contains a notice placed by the
copyright holder saying it may be distributed under the terms of this General Public License.
The “Program”, below, refers to any such program or work, and a “work based on the
Program” means either the Program or any derivative work under copyright law: that is to
say, a work containing the Program or a portion of it, either verbatim or with modifications
and/or translated into another language. (Hereinafter, translation is included without limitation
in the term “modification”.) Each licensee is addressed as “you”.
Activities other than copying, distribution and modification are not covered by this License;
they are outside its scope. The act of running the Program is not restricted, and the output
from the Program is covered only if its contents constitute a work based on the Program
(independent of having been made by running the Program). Whether that is true depends on
what the Program does.
2. You may copy and distribute verbatim copies of the Program’s source code as you receive
it, in any medium, provided that you conspicuously and appropriately publish on each copy
an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that
refer to this License and to the absence of any warranty; and give any other recipients of the
Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option
offer warranty protection in exchange for a fee.
3. You may modify your copy or copies of the Program or any portion of it, thus forming a work
based on the Program, and copy and distribute such modifications or work under the terms
of Section 1 above, provided that you also meet all of these conditions:
1) You must cause the modified files to carry prominent notices stating that you changed
the files and the date of any change.
2) You must cause any work that you distribute or publish, that in whole or in part contains
or is derived from the Program or any part thereof, to be licensed as a whole at no charge
to all third parties under the terms of this License.
3) If the modified program normally reads commands interactively when run, you must
cause it, when started running for such interactive use in the most ordinary way, to print
or display an announcement including an appropriate copyright notice and a notice that
there is no warranty (or else, saying that you provide a warranty) and that users may
redistribute the program under these conditions, and telling the user how to view a copy
of this License. (Exception: if the Program itself is interactive but does not normally print
such an announcement, your work based on the Program is not required to print an
announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that
work are not derived from the Program, and can be reasonably considered independent
and separate works in themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Program, the distribution of the
whole must be on the terms of this License, whose permissions for other licensees extend to
the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written
entirely by you; rather, the intent is to exercise the right to control the distribution of derivative
English - 66
ARNO-WIFI_F900E-03285E_EN_131120.indd 66
2013-11-20
5:51:29
4.
6.
7.
8.
08 APPENDIX
5.
or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program
(or with a work based on the Program) on a volume of a storage or distribution medium does
not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in
object code or executable form under the terms of Sections 1 and 2 above provided that you
also do one of the following:
1) Accompany it with the complete corresponding machinereadable source code, which
must be distributed under the terms of Sections 1 and 2 above on a medium customarily
used for software interchange; or,
2) Accompany it with a written offer, valid for at least three years, to give any third party,
for a charge no more than your cost of physically performing source distribution, a
complete machine-readable copy of the corresponding source code, to be distributed
under the terms of Sections 1 and 2 above on a medium customarily used for software
interchange; or, c) Accompany it with the information you received as to the offer to
distribute corresponding source code. (This alternative is allowed only for noncommercial
distribution and only if you received the program in object code or executable form with
such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications
to it. For an executable work, complete source code means all the source code for all
modules it contains, plus any associated interface definition files, plus the scripts used to
control compilation and installation of the executable. However, as a special exception,
the source code distributed need not include anything that is normally distributed (in either
source or binary form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component itself accompanies
the executable.
If distribution of executable or object code is made by offering access to copy from a
designated place, then offering equivalent access to copy the source code from the same
place counts as distribution of the source code, even though third parties are not compelled
to copy the source
along with the object code.
You may not copy, modify, sublicense, or distribute the Program except as expressly
provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute
the Program is void, and will automatically terminate your rights under this License. However,
parties who have received copies, or rights, from you under this License will not have their
licenses terminated so long as such parties remain in full compliance.
You are not required to accept this License, since you have not signed it. However, nothing
else grants you permission to modify or distribute the Program or its derivative works. These
actions are prohibited by law if you do not accept this License. Therefore, by modifying or
distributing the Program (or any work based on the Program), you indicate your acceptance
of this License to do so, and all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
Each time you redistribute the Program (or any work based on the Program), the recipient
automatically receives a license from the original licensor to copy, distribute or modify the
Program subject to these terms and conditions. You may not impose any further restrictions
on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing
compliance by third parties to this License.
If, as a consequence of a court judgment or allegation of patent infringement or for any
other reason (not limited to patent issues), conditions are imposed on you (whether by
court order, agreement or otherwise) that contradict the conditions of this License, they do
not excuse you from the conditions of this License. If you cannot distribute so as to satisfy
simultaneously your obligations under this License and any other pertinent obligations, then
as a consequence you may not distribute the Program at all. For example, if a patent license
English - 67
ARNO-WIFI_F900E-03285E_EN_131120.indd 67
2013-11-20
5:51:29
appendix
would not permit royalty-free redistribution of the Program by all those who receive copies
directly or indirectly through you, then the only way you could satisfy both it and this License
would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular
circumstance, the balance of the section is intended to apply and the section as a whole is
intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property
right claims or to contest validity of any such claims; this section has the sole purpose of
protecting the integrity of the free software distribution system, which is implemented by
public license practices. Many people have made generous contributions to the wide range
of software distributed through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing to distribute software
through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of
the rest of this License.
9. If the distribution and/or use of the Program is restricted in certain countries either by patents
or by copyrighted interfaces, the original copyright holder who places the Program under this
License may add an explicit geographical distribution limitation excluding those countries, so
that distribution is permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
10. The Free Software Foundation may publish revised and/or new versions of the General Public
License from time to time. Such new versions will be similar in spirit to the present version,
but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version
number of this License which applies to it and “any later version”, you have the option of
following the terms and conditions either of that version or of any later version published
by the Free Software Foundation. If the Program does not specify a version number of this
License, you may choose any version ever published by the Free Software Foundation.
11. If you wish to incorporate parts of the Program into other free programs whose distribution
conditions are different, write to the author to ask for permission. For software which is
copyrighted by the Free Software Foundation, write to the Free Software Foundation;
we sometimes make exceptions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
12. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT
WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK
AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD
THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
13. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOV E , BE L I ABL E TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING
BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO
OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY
English - 68
ARNO-WIFI_F900E-03285E_EN_131120.indd 68
2013-11-20
5:51:29
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
08 APPENDIX
If you develop a new program, and you want it to be of the greatest possible use to the public,
the best way to achieve this is to make it free software which everyone can redistribute and
change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of
each source file to most effectively convey the exclusion of warranty; and each file should have at
least the “copyright” line and a pointer to where the full notice is found.
one line to give the program’s name and an idea of what it does.
Copyright (C) yyyy name of author
This program is free software; you can redistribute it and/or modify it under the terms of the GNU
General Public License as published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program;
if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive
mode:
Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with
ABSOLUTELY NO WARRANTY; for details type `show w’. This is free software, and you are
welcome to redistribute it under certain conditions; type `show c’ for details.
The hypothetical commands `show w’ and `show c’ should show the appropriate parts of the
General Public License. Of course, the commands you use may be called something other than
`show w’ and `show c’; they could even be mouse-clicks or menu items--whatever suits your
program. You should also get your employer (if you work as a programmer) or your school, if any,
to sign a “copyright disclaimer” for the program, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision’ (which
makes passes at compilers) written by James Hacker.
signature of Ty Coon, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary
programs. If your program is a subroutine library, you may consider it more useful to permit
linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser
General Public License instead of this License.
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is
not allowed.
English - 69
ARNO-WIFI_F900E-03285E_EN_131120.indd 69
2013-11-20
5:51:29
appendix
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library
Public License, version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it.
By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share
and change free software--to make sure the software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software
packages--typically libraries--of the Free Software Foundation and other authors who decide to
use it. You can use it too, but we suggest you first think carefully about whether this license or
the ordinary General Public License is the better strategy to use in any particular case, based on
the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General
Public Licenses are designed to make sure that you have the freedom to distribute copies of free
software (and charge for this service if you wish); that you receive source code or can get it if you
want it; that you can change the software and use pieces of it in new free programs; and that
you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you
these rights or to ask you to surrender these rights. These restrictions translate to certain
responsibilities for you if you distribute copies of the library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the
recipients all the rights that we gave you. You must make sure that they, too, receive or can get
the source code. If you link other code with the library, you must provide complete object files
to the recipients, so that they can relink them with the library after making changes to the library
and recompiling it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you
this license, which gives you legal permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free
library. Also, if the library is modified by someone else and passed on, the recipients should
know that what they have is not the original version, so that the original author’s reputation will
not be affected by problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to
make sure that a company cannot effectively restrict the users of a free program by obtaining a
restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a
version of the library must be consistent with the full freedom of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public
License. This license, the GNU Lesser General Public License, applies to certain designated
libraries, and is quite different from the ordinary General Public License. We use this license for
certain libraries in order to permit linking those libraries into nonfree programs.
When a program is linked with a library, whether statically or using a shared library, the
combination of the two is legally speaking a combined work, a derivative of the original library.
The ordinary General Public License therefore permits such linking only if the entire combination
fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking
other code with the library.
We call this license the “Lesser” General Public License because it does Less to protect the
user’s freedom than the ordinary General Public License. It also provides other free software
developers Less of an advantage over competing non-free programs. These disadvantages are
the reason we use the ordinary General Public License for many libraries.
However, the Lesser license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible
use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free
programs must be allowed to use the library.
English - 70
ARNO-WIFI_F900E-03285E_EN_131120.indd 70
2013-11-20
5:51:29
08 APPENDIX
A more frequent case is that a free library does the same job as widely used non-free libraries.
In this case, there is little to gain by limiting the free library to free software only, so we use the
Lesser General Public License.
In other cases, permission to use a particular library in nonfree programs enables a greater
number of people to use a large body of free software. For example, permission to use the GNU
C Library in non-free programs enables many more people to use the whole GNU operating
system, as well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users’ freedom, it does
ensure that the user of a program that is linked with the Library has the freedom and the
wherewithal to run that program using a modified version of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close
attention to the difference between a “work based on the library” and a “work that uses the
library”. The former contains code derived from the library, whereas the latter must be combined
with the library in order to run.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
1. This License Agreement applies to any software library or other program which contains a
notice placed by the copyright holder or other authorized party saying it may be distributed
under the terms of this Lesser General Public License (also called “this License”). Each
licensee is addressed as “you”.
A “library” means a collection of software functions and/or data prepared so as to be
conveniently linked with application programs (which use some of those functions and data)
to form executables.
The “Library”, below, refers to any such software library or work which has been distributed
under these terms. A “work based on the Library” means either the Library or any derivative
work under copyright law: that is to say, a work containing the Library or a portion of it, either
verbatim or with modifications and/or translated straightforwardly into another language.
(Hereinafter, translation is included without limitation in the term “modification”.)
“Source code” for a work means the preferred form of the work for making modifications to
it. For a library, complete source code means all the source code for all modules it contains,
plus any associated interface definition files, plus the scripts used to control compilation and
installation of the library.
Activities other than copying, distribution and modification are not covered by this License;
they are outside its scope. The act of running a program using the Library is not restricted,
and output from such a program is covered only if its contents constitute a work based on
the Library (independent of the use of the Library in a tool for writing it).
Whether that is true depends on what the Library does and what the program that uses the
Library does.
2. You may copy and distribute verbatim copies of the Library’s complete source code as you
receive it, in any medium, provided that you conspicuously and appropriately publish on each
copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices
that refer to this License and to the absence of any warranty; and distribute a copy of this
License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option
offer warranty protection in exchange for a fee.
3. You may modify your copy or copies of the Library or any portion of it, thus forming a work
based on the Library, and copy and distribute such modifications or work under the terms of
Section 1 above, provided that you also meet all of these conditions:
1) The modified work must itself be a software library.
2) You must cause the files modified to carry prominent notices stating that you changed
the files and the date of any change.
English - 71
ARNO-WIFI_F900E-03285E_EN_131120.indd 71
2013-11-20
5:51:29
appendix
3) You must cause the whole of the work to be licensed at no charge to all third parties
under the terms of this License.
4) If a facility in the modified Library refers to a function or a table of data to be supplied by
an application program that uses the facility, other than as an argument passed when the
facility is invoked, then you must make a good faith effort to ensure that, in the event an
application does not supply such function or table, the facility still operates, and performs
whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely
well-defined independent of the application. Therefore, Subsection 2d requires that
any application-supplied function or table used by this function must be optional: if the
application does not supply it, the square root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that
work are not derived from the Library, and can be reasonably considered independent
and separate works in themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Library, the distribution of the
whole must be on the terms of this License, whose permissions for other licensees extend to
the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not
the intent of this section to claim rights or contest your rights to work written entirely by you;
rather, the intent is to exercise the right to control the distribution of derivative or collective
works based on the Library. In addition, mere aggregation of another work not based on
the Library with the Library (or with a work based on the Library) on a volume of a storage or
distribution medium does not bring the other work under the scope of this License.
4. You may opt to apply the terms of the ordinary GNU General Public License instead of this
License to a given copy of the Library. To do this, you must alter all the notices that refer to
this License, so that they refer to the ordinary GNU General Public License, version 2, instead
of to this License. (If a newer version than version 2 of the ordinary GNU General Public
License has appeared, then you can specify that version instead if you wish.) Do not make
any other change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU
General Public License applies to all subsequent copies and derivative works made from that
copy.
This option is useful when you wish to copy part of the code of the Library into a program
that is not a library.
5. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in
object code or executable form under the terms of Sections 1 and 2 above provided that you
accompany it with the complete corresponding machine-readable source code, which must
be distributed under the terms of Sections 1 and 2 above on a medium customarily used for
software interchange.
If distribution of object code is made by offering access to copy from a designated place,
then offering equivalent access to copy the source code from the same place satisfies the
requirement to distribute the source code, even though third parties are not compelled to
copy the source along with the object code.
6. A program that contains no derivative of any portion of the Library, but is designed to work
with the Library by being compiled or linked with it, is called a “work that uses the Library”.
Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the
scope of this License.
However, linking a “work that uses the Library” with the Library creates an executable that
is a derivative of the Library (because it contains portions of the Library), rather than a “work
that uses the library”. The executable is therefore covered by this License. Section 6 states
terms for distribution of such executables.
When a “work that uses the Library” uses material from a header file that is part of the
Library, the object code for the work may be a derivative work of the Library even though
English - 72
ARNO-WIFI_F900E-03285E_EN_131120.indd 72
2013-11-20
5:51:29
08 APPENDIX
the source code is not. Whether this is true is especially significant if the work can be linked
without the Library, or if the work is itself a library. The threshold for this to be true is not
precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors,
and small macros and small inline functions (ten lines or less in length), then the use of the
object file is unrestricted, regardless of whether it is legally a derivative work. (Executables
containing this object code plus portions of the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for
the work under the terms of Section 6. Any executables containing that work also fall under
Section 6, whether or not they are linked directly with the Library itself.
7. As an exception to the Sections above, you may also combine or link a “work that uses the
Library” with the Library to produce a work containing portions of the Library, and distribute
that work under terms of your choice, provided that the terms permit modification of the work
for the customer’s own use and reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in it
and that the Library and its use are covered by this License. You must supply a copy of
this License. If the work during execution displays copyright notices, you must include the
copyright notice for the Library among them, as well as a reference directing the user to the
copy of this License. Also, you must do one of these things:
1) Accompany the work wi th the complet e corresponding machine-readable source
code for the Library including whatever changes were used in the work (which must be
distributed under Sections 1 and 2 above); and, if the work is an executable linked with
the Library, with the complete machine-readable “work that uses the Library”, as object
code and/or source code, so that the user can modify the Library and then relink to
produce a modified executable containing the modified Library. (It is understood that the
user who changes the contents of definitions files in the Library will not necessarily be
able to recompile the application to use the modified definitions.)
2) Use a suitable shared library mechanism for linking with the Library. A suitable
mechanism is one that (1) uses at run time a copy of the library already present on the
user’s computer system, rather than copying library functions into the executable, and (2)
will operate properly with a modified version of the library, if the user installs one, as long
as the modified version is interfacecompatible with the version that the work was made
with.
3) Accompany the work with a written offer, valid for at least three years, to give the same
user the materials specified in Subsection 6a, above, for a charge no more than the cost
of performing this distribution.
4) If distribution of the work is made by offering access to copy from a designated place,
offer equivalent access to copy the above specified materials from the same place.
5) Verify that the user has already received a copy of these materials or that you have
already sent this user a copy.
For an executable, the required form of the “work that uses the Library” must include any
data and utility programs needed for reproducing the executable from it. However, as a
special exception, the materials to be distributed need not include anything that is normally
distributed (in either source or binary form) with the major components (compiler, kernel, and
so on) of the operating system on which the executable runs, unless that component itself
accompanies the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary
libraries that do not normally accompany the operating system. Such a contradiction means
you cannot use both them and the Library together in an executable that you distribute.
8. You may place library facilities that are a work based on the Library side-by-side in a single
library together with other library facilities not covered by this License, and distribute such
a combined library, provided that the separate distribution of the work based on the Library
and of the other library facilities is otherwise permitted, and provided that you do these two
English - 73
ARNO-WIFI_F900E-03285E_EN_131120.indd 73
2013-11-20
5:51:29
appendix
things:
1) Accompany the combined library with a copy of the same work based on the Library,
uncombined with any other library facilities. This must be distributed under the terms of
the Sections above.
2) Give prominent notice with the combined library of the fact that part of it is a work based
on the Library, and explaining where to find the accompanying uncombined form of the
same work.
9. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly
provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or
distribute the Library is void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under this License will not
have their licenses terminated so long as such parties remain in full compliance.
10. You are not required to accept this License, since you have not signed it. However, nothing
else grants you permission to modify or distribute the Library or its derivative works. These
actions are prohibited by law if you do not accept this License. Therefore, by modifying or
distributing the Library (or any work based on the Library), you indicate your acceptance of
this License to do so, and all its terms and conditions for copying, distributing or modifying
the Library or works based on it.
11. Each time you redistribute the Library (or any work based on the Library), the recipient
automatically receives a license from the original licensor to copy, distribute, link with or
modify the Library subject to these terms and conditions. You may not impose any further
restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for
enforcing compliance by third parties with this License.
12. If, as a consequence of a court judgment or allegation of patent infringement or for any
other reason (not limited to patent issues), conditions are imposed on you (whether by
court order, agreement or otherwise) that contradict the conditions of this License, they do
not excuse you from the conditions of this License. If you cannot distribute so as to satisfy
simultaneously your obligations under this License and any other pertinent obligations, then
as a consequence you may not distribute the Library at all. For example, if a patent license
would not permit royalty-free redistribution of the Library by all those who receive copies
directly or indirectly through you, then the only way you could satisfy both it and this License
would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular
circumstance, the balance of the section is intended to apply, and the section as a whole is
intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property
right claims or to contest validity of any such claims; this section has the sole purpose of
protecting the integrity of the free software distribution system which is implemented by
public license practices.
Many people have made generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that system; it is up to the author/
donor to decide if he or she is willing to distribute software through any other system and a
licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of
the rest of this License.
13. If the distribution and/or use of the Library is restricted in certain countries either by patents
or by copyrighted interfaces, the original copyright holder who places the Library under this
License may add an explicit geographical distribution limitation excluding those countries, so
that distribution is permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
14. The Free Software Foundation may publish revised and/or new versions of the Lesser
General Public License from time to time. Such new versions will be similar in spirit to the
present version, but may differ in detail to address new problems or concerns.
English - 74
ARNO-WIFI_F900E-03285E_EN_131120.indd 74
2013-11-20
5:51:29
08 APPENDIX
Each version is given a distinguishing version number.
If the Library specifies a version number of this License which applies to it and “any later
version”, you have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Library does not specify
a license version number, you may choose any version ever published by the Free Software
Foundation.
15. If you wish to incorporate parts of the Library into other free programs whose distribution
conditions are incompatible with these, write to the author to ask for permission. For software
which is copyrighted by the Free Software Foundation, write to the Free Software Foundation;
we sometimes make exceptions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
16. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT
WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK
AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE
LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
17. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRI T ING
WI L L ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/
OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING
BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO
OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries If you develop a new library, and you want
it to be of the greatest possible use to the public, we recommend making it free software that
everyone can redistribute and change. You can do so by permitting redistribution under these
terms (or, alternatively, under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the
start of each source file to most effectively convey the exclusion of warranty; and each file should
have at least the “copyright” line and a pointer to where the full notice is found.
one line to give the library’s name and an idea of what it does.
Copyright (C) year name of author
This library is free software; you can redistribute it and/or modify it under the terms of the GNU
Lesser General Public License as published by the Free Software Foundation; either version 2.1
of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU
Lesser General Public License for more details.
English - 75
ARNO-WIFI_F900E-03285E_EN_131120.indd 75
2013-11-20
5:51:29
appendix
You should have received a copy of the GNU Lesser General Public License along with this
library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a
“copyright disclaimer” for the library, if necessary. Here is a sample; alter the names: Yoyodyne,
Inc., hereby disclaims all copyright interest in the library `Frob’ (a library for tweaking knobs)
written by James Random Hacker.
signature of Ty Coon, 1 April 1990
Ty Coon, President of Vice
That’s all there is to it!
BSD LICENSE
flex: the fast lexical analyser
Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006, 2007
The Flex Project.
Copyright (c) 1990, 1997 The Regents of the University of California. All rights reserved.
LibNet License
Copyright (c) 1998 - 2001 Mike D. Schiffman <mike@infonexus.com>
PPP/ Debian
Copyright (c) 1989 Regents of the University of California. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that
the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the name of the <organization> nor the names of its contributors may be used to endorse or
promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES ( INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
English - 76
ARNO-WIFI_F900E-03285E_EN_131120.indd 76
2013-11-20
5:51:30
OPENSSL
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://
www.openssl.org/)
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)
=====================================================================
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License
and the original SSLeay license apply to the toolkit. See below for the actual license texts.
Actually both licenses are BSD-style Open Source licenses. In case of any license issues related
to OpenSSL please contact openssl-core@openssl.org.
08 APPENDIX
LICENSE ISSUES
OpenSSL License
=====================================================================
Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions
and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials provided
with the distribution.
3. All advertising materials mentioning features or use of this software must display the following
acknowledgment: “This product includes software developed by the OpenSSL Project for
use in the OpenSSL Toolkit. (http://www.openssl.org/)”
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or
promote products derived from this software without prior written permission. For written
permission, please contact openssl-core@openssl.org.
5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL”
appear in their names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the OpenSSL
Toolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
=====================================================================
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This
product includes software written by Tim Hudson (tjh@cryptsoft.com).
English - 77
ARNO-WIFI_F900E-03285E_EN_131120.indd 77
2013-11-20
5:51:30
memo
ARNO-WIFI_F900E-03285E_EN_131120.indd 78
2013-11-20
5:51:30
memo
ARNO-WIFI_F900E-03285E_EN_131120.indd 79
2013-11-20
5:51:30
QUESTIONS OR COMMENTS?
Country
CALL
OR VISIT US ONLINE AT
U.K
0330 SAMSUNG (7267864)
www.samsung.com
DC68-03285E
ARNO-WIFI_F900E-03285E_EN_131120.indd 80
2013-11-20
5:51:30