web version

8" Theater and Television Fresnels
Cat. No. FR2TH, FR2TV
User Guide
PK-93196-10-00-0F
Leviton Fresnels utilize the latest advances in lighting technology to provide the best quality fixture in the market. This operating guide will help you to become more familiar with your spotlight.
The major components of the fresnel are:
• The Door Assembly - Includes the lens door, accessory clips, latch mechanism, safety latch and the fresnel lens.
• The Lamp Carriage - Includes the lampholder, wiring, reflector and the lampholder platform and associated parts.
• The Focus System - Includes the focus handle, pinion gear and associated hardware.
• The Housing - Includes the extruded housing, cool focusing handles, and simple, rugged design.
Functions
Maintenance
Lamp Installation
Focusing
Reflector
Disconnect the unit from power. Open
the lens door by pulling the top of the
door pivot latch towards you. This will
allow the door to swing open, revealing
a lamp carriage assembly with a
lampholder and reflector mounted to
the platform.
The Leviton fresnels have an
extremely wide focusing range, with
spot focus applications to 85’ and ten
foot projected diameters at only 8’ in
full flood focus. The focus system is
simple to operate and maintain.
The reflector may be accessed by
opening the lens door. Remove lamp
to access reflector surface for cleaning. The Alzak® finish requires little
maintenance, occasionally wipe with
isopropyl (rubbing) alcohol, and a lint
free cloth. Strong alcohol or acidic
cleaners MUST NOT be used.
To lamp the television fixture,
Cat. No. FR2TV, release the
locking lever of the bipost
socket so the lever is parallel
to the extruded housing.
Insert the bipost lamp into the
socket until the lamp stops,
then lock the lever to the
original position. The socket
should firmly hold the lamp in
position. Be sure that the lever
is completely closed.
Close the lens door until latch
engages.
NOTE:
Please do not touch the quartz lamp envelope during installation. If this
occurs, clean the lamp with isopropyl (rubbing) alcohol and lint free,
clean cloth.
These Leviton fresnels are UL listed to 1000 watts. Any usage of higher
wattage lamps is improper usage of the fixture and voids any manufacturing
warranties. Please use only the lamps listed in the charts shown here.
Beam Control
The fresnel spotlight is a soft focusing projector that may be framed to reduce
flare or direct the light through Leviton barn doors and top hats. The beam
may be further softened through wire scrims or filters. Color temperature may
be shifted with Leviton dichroic glass filters, or normal color medium.
The Leviton fresnels accept industry standard 10” x 10” accessories, allowing
the fixtures to accept automated color changers, liquid crystal strobe effects
and many other items.
Color
Lee Color Effect Filters are recommended for all filter applications. These
filters are available in over 175 colors, color corrections, and diffusion
selections. Lee Filters are available in both 21” x 4” sheets and 25’ x 4’ rolls.
Watts
Part
No.
2000
1500
1000
1000
2000
1000
1000
176-194
176-193
176-192
176-191
6994C
T-16
T-2
ANSI
BVW
CWZ
BVV
BVT
Color
Temp.
Life
(Hrs.)
2000W, 250 hr., 3200°K, 120V
1500W, 325 hr., 3200°K, 120V
1000W, 200 hr., 3200°K, 120V
1000W, 500 hr., 3050°K, 120V
2000W, 400 hr., 3200°K, 220/240V
1000W, 750 hr., 3050°K, 220/240V
1000W, 200 hr., 3050°K, 220/240V
Lens
The lens will become dirty due
to environmental conditions. To
clean, use a lint-free cloth and
rubbing alcohol. Do not use commercial lens cleaners. If significant
dirt and grime exist, remove the
lens from the fixture and place
lens in clean water WITHOUT
SOAP. Rinse grime away, clean
the reflector with alcohol.
Recommended Lamps for 8" Television Fresnel
Watts
2000
1500
1000
2000
650
Part
No.
176-075
176-157
176-161
476-055/056
476-048/049
Focus System
The rack and pinion focus system can
lose tension over long periods of time
by expansion and contraction of the
fixture housing and components, or
the gear itself could move causing
improper fitting against the cast rack.
Both items are easily resolved.
The tension is adjusted by turning the
center screw within the focus handle
while the fixture is aimed 90 degrees down, so the full weight of the
lampholder assembly bears on the
focus gear. Tighten the screw until the
assembly does not move. Do not over
tighten.
ANSI
Color
Temp.
CYX
CXZ
CYV
CP41
CP39
2000W, 200 hr., 3200°K, 120V
1500W, 300 hr., 3200°K, 120V
1000W, 200 hr., 3200°K, 120V
2000W, 200 hr., 3200°K, 220/240V
650W, 100 hr., 3200°K, 220/240V
Accesories
Part No.
Description
000-A2KBD-000
000-A2KCF-000
000-A2KSS-000
000-A00CS-000
000-A2KTH-000
Eight leaf barn door
Diffusion frame
Set, single, half/single scrim
Combo stud for flat yoke
8" Top hat
Photometric Performance
Life
(Hrs.)
WEB VERSION
To lamp the theatre fixture,
Cat. No. FR2TH, align the
flanges of the pre focus lamp
with the respective indentations
of the pre focus lampholder.
Please note the lamp flanges
are asymmetrical, and the large
lamp flange must align with
large socket indentation. After
alignment, press lamp down
by the ceramic base and twist
clockwise 90° until lamp locks in
position.
The focusing is controlled on the right
side of the fixture, simply turn the
handle clockwise for flood focus and
counter clockwise for spot focus.
Recommended Lamps for 8" Theater Fresnel
8" Theater Fresnel, Cat. No. FR2TH, with lamp No. 176-194, 2000W
ANSI Code BVW
The focus gear should interface
smoothly with the rack on the focus
platform. To adjust, aim fixture to a
horizontal axis or place unit on a table.
Remove the focus handle. Loosen but
do not remove the screws on each
side of the focus gear. Reach inside the
fixture and move the socket assembly
manually. Adjust the focus gear so the
assembly is halfway between maximum
possible engagement into the rack and
the point where gears will slip. Tighten
the two screws when focus gear reaches
that point.
For field diameter at any distance, multiply that distance by 0.269 for spot
and 1.238 for flood.
The focus assembly will grind against the
rack if engaged too deeply, and gears will
slip if adjustment is too high.
Beam Candlepower
Beam Candlepower
Spot
Flood
358,000
37,000
8" Television Fresnel, Cat. No. FR2TV, with lamp No. 176-075, 2000W
ANSI Code CYX
For field diameter at any distance, multiply that distance by 0.265 for spot
and 1.32 for flood.
Spot
Flood
358,000
39,500
LAMP HOUSING ASSEMBLY
PLATFORM ASSEMBLY - THEATER FRESNEL
DOOR ASSEMBLY
Ref.
Qty.
Description
Ref.
Qty.
Description
Ref.
Qty.
Description
1
1
Upper right housing
40
1
Lens door assembly
55
4
Screw, pan head, 8-32 x 3/4”
2
1
Upper left housing
41
2
Screw, pan head, 6-32 x 1/2”
56
1
Screw, pan head, 8-32 x 1/2”
3
1
Lower right housing
42
1
Lock pin
57
1
Lampholder platform
4
1
Lower left housing
43
1
Latch handle
58
4
Carriage assembly guide
1
Cable clamp
Item Number
Item Number
Item Number
5
1
Top housing
44
1
Commpression spring
6
1
Focus track
45
1
Safety clip
60
1
Mogul prefocus adapter
7
1
Front cover
46
1
Retaining ring
61
1
Adapter brace
62
1
Mogul prefocus socket
63
2
Washer, flat, #10
64
2
Screw, pan head, 10-24 x 1”
65
1
Shield
66
1
Reflector mount
67
4
Rivet, 1/8” x 1/4”
68
1
Reflector
Rear cover
9
1
Standoff disk
N00-HD237-690
10
3
Rivet, 3/16” x 11/16”
N00-HD913-400
11
1
Yoke
N00-SM281-330
12
1
Washer, flat
13
1
Bolt, hex head, 1/4-20 x 1”
14
1
Screw, pan head, 10-24 x 1”
15
1
Focus handle
16
1
Washer, fibre
17
5
Screw, pan head, 8-32 x 3/4”
18
2
Wave washer
N00-HD223-440
19
1
Focus gear assembly
N01-SM280-570
20
13
K-lock nut, 8-32
21
2
Screw, pan head, 10-24 x 3/4”
22
1
Hinge
23
30
Screw, flat head, 8-32 x 1/2”
24
1
Ring terminal
25
1
Green wire
26
2
Washer, internal tooth, #8
27
1
Strain relief
28
1
Sleeving, 32” long
29
1
Black wire
30
1
White wire
31
1
Standoff disk
N00-KN280-950
47
1
Knob
48
1
K-lock nut, 6-32
49
1
Latch
50
1
Latch spring
51
1
Washer, flat
52
1
Screw, pan head, 6-32 x 1”
53
1
8” Fresne lens
N01-LE020-110
54
4
Lens fastener
N00-HD935-730
Qty.
Description
Item Number
69
1
Lampholder
N00-AS282-310
N01-SK020-260
N00-HD031-320
39
8
70
36
68
35
20
38
13
12
N00-HD781-900
10
9
2
14
23
11
67
37
15
4
16
5
17
7
18
6
64
20
63
21
N00-SM237-550
62
19
32
3
Rivet, 3/16” x 7/16”
33
1
Pressure disk
N00-SM243-380
34
1
T-bolt
N00-HD062-000
35
4
Screw, pan head, 6-32 x 3/8”
N00-HD020-800
36
1
Light shield
37
2
K-lock nut, 10-24
38
1
Tilt handle
39
2
Screw, pan head, 10-24 x 2”
70
1
C-clamp
22
20
1
17
42
43
44
45
66
69
3
46
27
49
60
29
24
41
26
54
40
23
20
25
58
17
30
25
20
58
33
34
57
57
23
56
53
51
59
20
31
32
26
20
59
28
48
N00-HD707-000
61
67
20
47
000-A00CC-000
66
65
68
50
55
41
52
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact Leviton in writing at Leviton Manufacturing of Canada Ltd to the attention of the Quality Assurance Department, 165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone at 1 800 405-5320.
23
56
55
WEB VERSION
1
Ref.
N00-SM275-250
59
8
PLATFORM ASSEMBLY - TELEVISION FRESNEL
LIMITED 2 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for two years from the purchase date. Leviton’s only obligation is to correct such defects by repair or replacement, at its option. For details visit
www.leviton.com or call 1-800-824-3005. This warranty excludes and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product is installed improperly or in an improper environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating conditions or not in
accordance with any labels or instructions. There are no other or implied warranties of any kind, including merchantability and fitness for a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and fitness for a particular purpose, is limited to two years.
Leviton is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage to, or loss of use of, any equipment, lost sales or profits or delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
© 2016 Leviton Mfg. Co., Inc.
For Technical Assistance Call: 1-800-824-3005 (U.S.A. Only) www.leviton.com
PK-93196-10-00-0F