E1L_US_U_.book-INDEX Page 30 Wednesday, May 23, 2001 11:40 PM
Setting the Timer (Timer Settings)
You can set the current date and time, and specify the time taken for the machine to enter the
Sleep mode.
NOTE
• The Timer Settings screen is made up of several screens. Use “ ▼” or “▲” to scroll to the desired
screen and make the required settings.
Selecting and Storing Settings to Suit your Needs
3
• When “ ▼” or “▲” should be pressed, the indication
is displayed in this manual.
Setting the Current Date and Time
You can set the current date and time. The date and time set here is also used as the time
setting when required for functions.
− GMT
: The time at the Greenwich Observatory in England is called GMT
(Greenwich Mean Time).
− Time Zone
: The standard time zones of the world are expressed globally in
terms of the difference in hours (± up to 12 hours) from GMT (± 0
hours). A time zone is a region throughout which this time
difference is the same.
− Daylight Saving Time : In some countries, time is advanced throughout the summer
season. The period in which this is applied is called <daylight
saving time>.
1 Call up the desired screen as follows:
Date & Time Settings
(Additional Functions)
3-30
Setting the Timer (Timer Settings)
E1L_US_U_.book-INDEX Page 31 Wednesday, May 23, 2001 11:40 PM
Enter the current date (month, day, year) and time with
(numeric keys).
-
3
Enter the date, and the time in 24-hour clock as four digits without a space.
Enter all four digits for the year ranging from 2000 to 2038.
Examples: MAY 6
→ 0506
7:05 a.m. → 0705
11:18 p.m. → 2318
NOTE
• If you make a mistake when entering values, press
(Clear), and enter the values again.
● When setting the Time Zone Settings:
Press “Time Zone Settings,” and select the time zone where the machine is
located, and press “OK.”
NOTE
• The default setting is “GMT-5:00.”
Eastern time (US/Canada) : GMT-5:00
Central time (US/Canada) : GMT-6:00
Mountain time (US/Canada) : GMT-7:00
Pacific time (US/Canada)
: GMT-8:00
• Press “ ▼” or “▲” to scroll the list.
Setting the Timer (Timer Settings)
3-31
Selecting and Storing Settings to Suit your Needs
2
E1L_US_U_.book-INDEX Page 32 Wednesday, May 23, 2001 11:40 PM
● When setting the Daylight Saving Time Settings:
Press “Daylight Saving Time Settings” → press “On” → press “Start Date.”
Select “Month” → “Week” → “Day” to specify each of them.
3
Selecting and Storing Settings to Suit your Needs
Enter the time using “–” and “+,” and press “OK.”
Press “End Date” and make the settings in the same way as the above.
NOTE
• When you make the Daylight Saving Time settings, the machine automatically sets the
standard time of the machine one-hour forward at the specified date and time.
• The default setting is “Off.”
• You can also set the time with
(numeric keys).
• The time can be set from 0 to 23 (in one-hour increments).
3-32
Setting the Timer (Timer Settings)
E1L_US_U_.book-INDEX Page 33 Wednesday, May 23, 2001 11:40 PM
Press “OK.”
4
Press “Done.”
3
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Setting the Time Taken to Initiate Auto Sleep After
Finishing Operations
If the machine is not operated (no keys are pressed) for a certain period of time, the control
panel power switch automatically switches OFF to save power. The machine then enters the
Sleep mode.
NOTE
• The default setting is “2 minutes.”
1 Call up the desired screen as follows:
Change Auto Sleep Time
(Additional Functions)
Setting the Timer (Timer Settings)
3-33
Selecting and Storing Settings to Suit your Needs
3
E1L_US_U_.book-INDEX Page 34 Wednesday, May 23, 2001 11:40 PM
2
The Auto Sleep Time settings are 10 seconds, 1, 2, 10, 15, 20, 30, 40, 50 minutes, 1 hour,
90 minutes, 2, 3, and 4 hours.
3
Selecting and Storing Settings to Suit your Needs
Enter the desired Auto Sleep Time with “▼” or “▲,” and press “OK.”
3
Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Setting the Time Taken for the Display to Return to the
Basic Features Screen After Finishing Operations
If the machine is not operated (no keys are pressed) for a certain period of time, the display
returns to the Basic Features screen (standard setting) of the selected function.
This period of time is called “Auto Clear Time.” Auto Clear Time can be set from 1 to 9
minutes in one-minute increments, and can also be set to “Off.”
NOTE
• The default setting is “2 minutes.”
• When “0” is selected, the Auto Clear function is not set.
1 Call up the desired screen as follows:
Change Auto Clear Time
(Additional Functions)
3-34
Setting the Timer (Timer Settings)
E1L_US_U_.book-INDEX Page 35 Wednesday, May 23, 2001 11:40 PM
Enter the desired time period using “–” or “+,” and press “OK.”
The Auto Clear Time settings are from 0 to 9 minutes (in one-minute increments).
You can also enter values using
3
-
3
(numeric keys).
Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Setting the Time Taken for the Unit to Quiet Down After the
Last Task
This machine enters the Quiet mode after a specified amount of time has elapsed following a
print job or after a key has been pressed. On this screen you can specify the amount of time
that must be taken before entering the Quiet mode.
NOTE
• The default setting is “1 minute.”
1 Call up the desired screen as follows:
Time Until Unit Quiets Down
(Additional Functions)
Setting the Timer (Timer Settings)
3-35
Selecting and Storing Settings to Suit your Needs
2
E1L_US_U_.book-INDEX Page 36 Wednesday, May 23, 2001 11:40 PM
2
The Time Until Unit Quiets Down settings are from 0 to 9 minutes (in one-minute
increments).
3
Selecting and Storing Settings to Suit your Needs
Enter the desired time period with “–” or “+,” and press “OK.”
You can also enter values using
3
-
(numeric keys).
Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Setting the Time that the Unit’s Power Turns Off on
Different Days of the Week
You can set the time that the machine automatically turns off for each day of the week.
NOTE
• Setting range: Daily from Sunday to Saturday, 00:00 to 23:59 in one-minute increments
• When Auto Clear Time and Daily Timer are both set, Auto Clear Time has priority.
• The default setting is “No setting.”
1 Call up the desired screen as follows:
Daily Timer Settings
(Additional Functions)
3-36
Setting the Timer (Timer Settings)
E1L_US_U_.book-INDEX Page 37 Wednesday, May 23, 2001 11:40 PM
Select the day of the week → enter the time with
keys) → press “OK.”
-
(numeric
3
Enter the time in 24-hour clock as four digits without a space.
Examples: 7:05 a.m.→ 0705
11:18 p.m.→ 2318
If you make a mistake when entering the time, choose the day of the week again, and enter
the four-digit number.
If you do not want to specify the time, press
3
(Clear).
Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Setting the Timer (Timer Settings)
3-37
Selecting and Storing Settings to Suit your Needs
2
Download PDF