®
Express Chop®
www.ninjakitchen.com
1 877 646-5288
NJ100 Series
OWNER’S GUIDE
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING
YOUR NINJA® EXPRESS CHOP®.
POLARIZED PLUG
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:
1.
WARNING:
To reduce the risk of
electric shock, this appliance has a polarized plug
(one blade is wider than the other). This plug will
fit into a polarized outlet only one way. If the plug
does not fit fully into the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician
to install the proper outlet. DO NOT modify the
plug in any way.
WARNING:
Extension cords are
not recommended for use with this product.
2.
3.
4.
5.
6.
7.
8.
1
1-877-646-5288
CAUTION! Chopping blades are sharp,
handle with care, especially when removing
the blade from the bowl, emptying the bowl
and during cleaning. When handling the
chopping blades, always hold by the
plastic shaft.
CAUTION: DO NOT BLEND HOT LIQUIDS.
To protect against electrical shock, do not
submerge the appliance or allow the power cord to
come into contact with water or any other liquid.
DO NOT allow young children to operate the
appliance or use as a toy. Close supervision is
necessary when any appliance is used by or
near children.
Remove the power cord from the electrical
outlet when not in use, before assembling
or disassembling parts and before cleaning.
To unplug, grasp the plug and pull from the
electrical outlet. Never pull from the power cord.
Appliance accessories are not intended to be
used in the microwave as it may result in damage
to the accessories.
DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it to
disconnect from electrical outlet; instead grasp
the plug and pull to disconnect.
DO NOT operate any appliance with a damaged
cord or plug, or after the appliance malfunctions,
has been dropped or damaged in any manner.
This appliance has no serviceable parts. Return
the appliance to EURO-PRO Operating LLC for
examination, repair or adjustment.
9. DO NOT let cord hang over edge of table or
counter, or touch hot surfaces, including the stove.
10. Always use the appliance on a dry, level surface.
11. Keep hands, hair, clothing, as well as utensils
out of container while processing to reduce the
risk of severe injury to persons or damage to the
appliance. A scraper may be used but only when
the appliance is not running.
12. Avoid contact with moving parts.
13. DO NOT attempt to sharpen blades.
14. DO NOT use the appliance if blade assembly is
bent or damaged.
15. DO NOT operate this appliance on or near any
hot surfaces (such as gas or electric burner or in
a heated oven).
16. The use of attachments or accessories
including canning jars, not recommended by the
manufacturer may result in fire, electric shock or
personal injury.
17. DO NOT remove the motor head before the
chopping blades have stopped turning.
18. To reduce the risk of injury, NEVER operate the
appliance without the splash guard and bowl
in place; DO NOT try to defeat the interlock
mechanism; make sure that the cutting blades are
properly assembled before operating the appliance.
19. DO NOT expose containers to extreme
temperature changes.
20. DO NOT use containers if they are cracked
or chipped.
21. DO NOT overfill.
22. DO NOT operate the appliance for more than
15 seconds.
23. DO NOT operate the appliance empty.
24. DO NOT use appliance for other than intended use.
25. Immediately release the On/Off pulse button on
the motor head in the event that the appliance
malfunctions during use.
26. To reduce the risk of injury, NEVER operate the
appliance without the splash guard and bowl
in place; DO NOT try to defeat the interlock
mechanism; make sure that the cutting blades are
properly assembled before operating the appliance.
27. In the event that the unit overheats, a thermal
switch will become activated and shut off
the motor. To reset the appliance, unplug the
appliance and let it cool down for approximately
15 minutes before using again.
28. THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended
use. Do not use outdoors.
29. If the appliance overheats, a thermal switch will
become activated and shut off the motor. To
reset, unplug the appliance and let it cool down
for approximately 10 minutes before using again.
30. Be certain cover is secured in place before
operating the appliance.
SAVE THESE
INSTRUCTIONS
www.ninjakitchen.com
2
THIS BOOK COVERS MODEL NUMBERS:
NJ100 30
NJ100GR 30
NJ100GN 30
NJ110GR 30
NJ100PR 30
NJ110WH 30
TECHNICAL SPECIFICATIONS
Voltage:
120V., 60Hz.
Power:
200 Watts
Bowl Capacity: 16 ounces (2 cups)
3
1-877-646-5288
Contents
Thank you for
purchasing the
Ninja® Express
Chop®.
Getting Started����������������������������������������������������������������������������������������������������� 5
Using the Ninja® Express Chop®���������������������������������������������������������������������������� 7
Cleaning and Maintenance������������������������������������������������������������������������������������ 9
Troubleshooting Guide������������������������������������������������������������������������������������������� 9
Warranty & Registration��������������������������������������������������������������������������������������� 10
www.ninjakitchen.com
4
Getting Started
a
b
c
d
e
f
a On/Off Pulse Button
e Processing Bowl with Non-Slip Base
b Power Head
f Spindle Pin
c Splash Guard / Storage Lid
g Power Cord (not shown)
dNinja® 4-Blade
5
1-877-646-5288
The Ninja® Express Chop® is an essential tool that is perfect for chopping and pureeing when preparing your favorite
recipes. For best results, be sure to carefully read all the instructions contained in the manual before using this appliance.
FEATURES:
• One touch pulse for precise control
• 16 oz. Processor Bowl - BPA Free
• Ninja® 4-blade technology
• Non slip Base
• Storage lid / splash guard
• Dishwasher safe parts
200 Watt Power Head
The 200 watt power head operates on 120V., 60Hz. electrical power. NEVER allow the power head to become wet when
plugged into an electrical outlet.
WARNING: The power head should never be immersed in water or any other liquid.
CAUTION: Make sure that the power head is unplugged from the electrical outlet and that the blades have stopped turning before attaching or removing any accessory.
CAUTION: Blades are sharp! Handle with care, especially when removing the blade from the bowl,
emptying the bowl and during cleaning Use extreme caution when handling the blades. Always hold
them by the shaft. Do not attempt to sharpen blades.
IMPORTANT: Never run the appliance empty.
www.ninjakitchen.com
6
Using the Ninja® Express Chop®
Shaft
Fig. 2
Open Flap
Fig. 1
Fig. 3
WARNING: DO NOT try to place the blades onto
the power head and then into the Ninja® Express
Chop®.
1 Place the processor bowl on a clean, dry, level surface.
CAUTION: Blades are sharp! Use extreme caution
when handling the blades. Always hold them by
the shaft.
CAUTION: DO NOT add more than 2 cups dry or 1
cup liquid ingredients as this may cause
overflow.
CAUTION: DO NOT operate without the splash
guard in place.
IMPORTANT: Never run the appliance empty.
2 Holding the chopping blade by the shaft, carefully place it
over the spindle pin inside the processing bowl. (Fig. 1)
IMPORTANT: Always assemble the blades inside
the container.
3 Carefully spin the blade counter clockwise to make sure
that it has inserted properly. (Fig. 2)
4 Place the food ingredients into the bowl.
IMPORTANT: Never add ingredients into the
processing bowl before placing the blade
assembly in first.
5 Place the splash guard / storage lid on the bowl. (Fig. 3)
6 Open the flap on the splash guard. (Fig. 3)
7
1-877-646-5288
Fig. 4
Fig. 5
Fig. 6
7 Place the power head on top of the splash guard
making sure that it is securely in place. (Fig. 4)
12 Make sure that the blades have stopped completely
before removing the power head.
8 To start the appliance, plug the power cord into the
electrical outlet, securely hold power head while
operating and press on the on/off pulse button located
on the top of the power head. (Fig. 5)
13 If the ingredients stick to the side of the processing
bowl, stop the appliance, remove the power head and
the splash guard. Use a spatula to dislodge the pieces
and then replace the splash guard and the power head.
Continue processing.
9 Hold the proccesing bowl firmly while depressing the
on/off pulse button to ensure the unit stays in place.
NOTE: DO NOT operate the appliance continuously for
more than 15 seconds at a time. Be careful not to over
process. For coarsely chopped foods, use repeated
short pulsing action until the desired consistency is
reached.
10 To stop the appliance, remove your fingers from the on/
off pulse button.
11 In order to obtain a better quality of chopping, operate
the appliance by using the “pulse” method.
14 Remove the blade assembly by its shaft before you
empty the contents of the processing bowl.
15 Place the storage lid onto the top of the processing
blowl and close the flap to store. (Fig. 6)
HINTS & TIPS FOR USING YOUR NINJA®
EXPRESS CHOP®
• For mincing, chopping and pureeing, increase the
length of pulses.
• For coarse chopping, use short, quick pulses and
monitor food texture.
• Pre-cut larger pieces to make them fit into the
processing bowl. When chopping hard foods cut into
1-inch cubes.
www.ninjakitchen.com
8
Cleaning and Maintenance
CAUTION: Make sure that the power head is unplugged from power source before inserting or removing
any attachment and before cleaning.
DO NOT immerse the power head into water or any other liquid. Clean with a damp sponge or cloth and wipe dry.
The processing bowl, splash guard /storage lid, and chopping blade are all dishwasher safe. It is recommended to place
the storage lid and the chopping blade on the top rack. Use extreme caution when handling the chopping blades as they
are very sharp.
Clean the Ninja® Express Chop® and all parts before first use and immediately after each use.
Please call customer service if any servicing needs to be performed on the appliance at 1-877-646-5288.
Troubleshooting Guide
PROBLEMS
POSSIBLE REASONS & SOLUTIONS
Check that the bottom of motor head is clean and there is no food blocking
connection when placing on containers.
There is too much food in the container.
Motor Doesn’t Start or Blades
Don’t Rotate.
The unit has overheated. Unplug and wait approximately 10 minutes before
using again.
Make sure the power head is securely placed on splash guard.
Check that the plug is securely inserted into the electrical outlet.
Check fuse or breaker. Replace fuse/reset breaker.
Food is Unevenly Chopped.
Either you are chopping too much food at one time, or the pieces are too big.
Try cutting the food into smaller pieces of even size and processing smaller
amounts per batch.
Food is Chopped Too Fine or
is Too Watery.
The food has been over processed. Use brief pulses or process for shorter
time. Let blades stop completely between pulses.
To purchase replacement parts, please visit our website: www.ninjakitchen.com
or contact customer service: 1-877-646-5288.
9
1-877-646-5288
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1) year
from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions.
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This
Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for
commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or damage due
to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by or resulting from
damages from shipping or repairs, service or alteration to the product or any of its parts, which have been performed by a repair
person not authorized by EURO-PRO Operating LLC.
If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period,
you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service
support, call 1-877-646-5288 or visit our website www.ninjakitchen.com.
If the appliance is found by EURO-PRO Operating LLC to be defective, in EURO-PRO Operating LLC’s sole discretion, we will
repair or replace it free of charge. Proof of purchase date and a check made payable to EURO-PRO Operating LLC in the amount
of $19.95 to cover the cost of return shipping and handling must be included.*
This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional
warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the specific obligations expressly assumed by it
under the terms of this Limited Warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential damages
to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages,
so the above may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from
province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and
to attach tag to item before packing with your name, complete address and phone number with a note giving
purchase information, model number and what you believe is the problem with the item. We recommend you insure
the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package
“ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the specifications
contained herein are subject to change without notice.
Product Registration
Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja® product within ten (10) days of
purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you
acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.
www.ninjakitchen.com
10
Euro-Pro Operating LLC
US: Newton, MA 02459
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
www.ninjakitchen.com
Copyright © Euro-Pro Operating LLC 2015
Euro-Pro, Express Chop and Ninja are registered trademarks of Euro-Pro Operating LLC.
Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the specifications
contained herein are subject to change without notice.
For Shark | Ninja U.S. Patent information visit http://www.europro.com/USPatents
Printed in China
NJ100series_30_IB_150507_4
Download PDF