【 新 製 品 】 FUJI Technology

New Product
【 RoHScompliant】
Automatic Pressure Control System
MP/APC Series Dual Controller FPC-151S
UPS standard equipped
20160307
【RoHScompliant 】
New automatic pressure control system Controller
MBV-LDⅡ-MP/APC ・ MEX-LD-MP/APC series
FPC-151S
-Low-price、High-performance、Compact size、and Various functionarity.☆ In switching of APC mode and MPA mode , it enables more versatile control.
☆Two valves can be controlled by a single controller FPC-151S.
☆ Parameter settings can be easy to connect a personal computer1. Also, without connecting to the PLC, it is also
possible to operate the system from a personal computer .
☆ It can completely seal our valve to be used in this system. Therefore can be full closed of the exhaust line as well as
automatically controlling the pressure.
☆ UPS standard equipped
Power failure protection is enabled by adding optional UPS power supply.
If power failure occurred, the valve moves to the fully closed position automatically.
1.APC mode (Auto pressure control mode)
☆ Various control methods are selectable
①Two valves are individually controlled by signals from the two vacuum gauges.
②The two valves can be synchronized controlled by a signal from a single vacuum gauge.
③One valve can be controlled by switching the signal from two vacuum gages according to pressure.
④The two valves can be synchronized controlled by switching the signal from two vacuum gages according
to pressure.
☆ This controller can be a wide range of pressure control by using the two vacuum gauge is switched
according to the pressure .
☆. Setting of a parameter could also use a vacuum gauge of Log output as well as usual linear output.
☆ Automatic pressure control and multi-position control are both available.
From any position to target position can be fast and smooth pressure control.
☆ Maximum 8 segments(step) program by each valves can be made eight patterns.
The PID value can be set eight patterns every each segment.、also more detailed pressure settings are available.
☆ P value of the PID control can be changed automatically according to the target pressure, and steadier pressure
can control.
2.MPA mode(Simplified pressure control mode)
☆By entering the current (4~20 mA or 0~10V) to the controller , it enable to operate between the fully closed - fully
open to the linear.
☆Pre-registered that had been 16 position (14 position other than fully- closed , fully- open ) , it will be able to move the
valve disc with a signal from the outside.
【 About the controller production correspondences other than a standard 】
Example : Mitsubishi Electric’s AC servo motor MR-J3 series and MR-J4 series etc.
Yasukawa Electric’s AC servo Σ-V series, Σ-7 series etc.
-1-
≪APC mode≫
【 System diagram-1 】
【 System diagram-2 】
-2-
≪MPA mode≫
【 System diagram-3 】
〈reference standard set prices 〉
1-axis control
Name ・ Model
Controller FPC-151S
qty
(attached softwear for setting)
Basic price(yen)
2-axis control
qty 量
Basic price(yen)
1
¥120,000
1
¥120,000
Valve (with Servo amplifier) MBV-1LDⅡ-MP-R
1
¥213,000
2
¥426,000
One set of cable
1
¥21,500
2
¥43,000
① MOT/ENC cable_4122202 (L=1.0m)
② Parallelconnection cable_4122306 (L=3.0m)
①②qty 2
③qty 1
①②③ qty 1
③ STP cable_4123400(L=0.5m/0.15m)
T/L
-3-
¥354,500
T/L
¥589,000
【 System configuration 】
1. Controller 「 F P C - 1 5 1S」
In APC mode, the valve can work fast and accurately when the output signal of vacuum gaugecalculates automatically, also
stable control.
Furthermore, by switching to MPA mode, current (4-20 mA) or voltage(0-10V) can be inputted directly, it can be made to
operate linearly between fully-closed to fully-open.
Model
FPC-151S
Input Power/
Current consumption
DC24V ・ 3A(Max)
Mode
APC mode
Control system
PID control
MPA mode
Position control according to the current command
and voltage command.
Maximum resolution
Features
0.1% of Sensor (vacuum gauge) FS
 Indicator of current pressure, target
pressure, parameter settings of PID ,These
operation can be done easily on the personal
computer.
0.1% of Input current FS
current
・4mA:(or 0V) fully-closed , 20mA(or10V※1)fully- open ,
during which the valve disc will movelinearly in response
to the current value.
 The valve disc can be moved by an external signal
(vacuum gauge power supply is not supplied)
 It can be operated with a personal computer
to the 16 -position which is set in the PC.
other than the remote operation by input and
(maximum 14-position and at the fully closed, fully
output of an external signal.
open)
 Setting and operating of the multi-position is
possible on the touch panel except pressure
control by PC.(maximum 14-position and at the
fully closed, fully open)
 Alarm output to servo system trouble.(Red LED)
External dimensions
31.6 × 142 × 172
・UPS Power supply(Controller connection exclusive cable included)
 Ethenetetc
Opution
*1 Upper limit value (voltage at fully- open) of voltage input can be set between 0 ~ 10V.
2.Vacuum gauge
The vacuum gauge can have you just use a commercial article using now.
Please use a linear voltage output or Log voltage output.
Upper and lower limits of the voltage can be set between 0 ~ + 10DCV.
3.Control Valve
Select the type according to specifications from our motor drive butterfly valves「MBV-LDⅡ-MP series」 or
Multi-position compact gate valves 「MEX-LD-MP series」.
Butterfly valve MBV-LDⅡ-MP
Leak rate
1×10
-9
105~10-6 Pa
SUS304
Gas contact material
AC servo-motor(built-in encoder)
DC24V ・ 3.2A(Max)
Viton O-ring
Valve rod seal
Vacuum grease
Critical temperature
Diameter (mm)
Flange type
1×10-10 Pa・m3/s≦
Pa・m /s≦
Availability
Driven mechanism
Input power/
Current consumption
Valve disc seal
Gate valve MEX-LD-MP
3
Viton O-ring
Silicone grease or Klüberalfa GR
Klüberalfa GR
Main body :150℃ , Motor : 40℃
25 ~ 300
JIS ISO CF KF(NW)
70 ~ 400
JIS ISO CF
◇Please refer to a catalogue of "the MBV-LDⅡ-MP series" or "the MEX-LD-MP series" about the detailed
specifications of the valve, the dimensions.
◇”MBV-LDⅡ-MP” valves leakage type(no valve disc seal)product is possible.
-4-
Dimensions
Controller 『 F P C - 1 5 1S 』
FPC-151S
No
1
2
3
4
5
NAME(Function)
Power supply DC24V in(CONNECTOR)
REMOTE in/out(CONNECTOR)
Analog in/out 1(CONNECTOR)
Analog in/out 2(CONNECTOR)
Termi Bus(CONNECTOR)to Seavo-Amp
-5-
No
6
7
8
9
10
NAME(Function)
UPS(CONNECTOR)
Micro B(CONNECTOR) to PC
POWER(LED)
READY(LED)
ALARM(LED)
Option
1.Motor encoder extension cable
Cables for connecting the servo amplifier and valve
MOT/ENC
MOT/ENC
MOT/ENC
MOT/ENC
MOT/ENC
MOT/ENC
MOT/ENC
MOT/ENC
MOT/ENC
Modele
extension cable_4122202
extension cable_4122204
extension cable_4122206
extension cable_4122208
extension cable_4122210
extension cable_4122218
extension cable_4122220
extension cable_4122230
extension cable_4122240
(1m)
(2m)
(3m)
(4m)
(5m)
(9m)
(10m)
(15m)
(20m)
length (L)
1m
2m
3m
4m
5m
9m
10m
15m
20m
( MOT )Motor extension cable
( ENC ) Encoder extension cable
2.SPT cable
Cables for connecting the servo amplifier and controller
Modele
SPT cable_4123400(0.5/0.15m)
length (L)
0.5/0.15m
L
3.Parallel connection cable
Cable for power supply to servo amplifier
Modele
Parallel connection cable_4122306 (3m)
Parallel connection cable_4122310 (5m)
Parallel connection cable_4122320 (10m)
length (L)
3m
5m
10m
4.UPS
If power failure occurred, the valve moves to the fully closed
or fully open position automatically.
Modele
UPS-300F-020S_4121045
(with UPS signal cable 2m)
UPS-300F-030S_4121046
(with UPS signal cable 3m)
20160307
-6-