User’s Guide
5" Portable Digital Video Baby Monitor With Wi-Fi®
Models: MBP855CONNECT, MBP855CONNECT-2,
MBP855CONNECT-3, MBP855CONNECT-4
The features described in this User’s Guide are subject to modifications without prior notice.
Welcome...
to your new Motorola Digital Video Baby Monitor!
Thank you for purchasing the Digital Video Baby Monitor. Now you can see
and hear your baby sleeping in another room or you can monitor your older
children in their play room.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola product, you will need to provide a copy
of your dated sales receipt to confirm warranty status. Registration is not
required for warranty coverage.
For product-related questions, please call:
+44 (0) 844 557 0890 (UK only)*
*Calls cost 7p per minute plus your telephone company's access charge
+44 (0) 8187 62092 (ROI)
On the Web: www.motorolahome.com
This User's Guide provides you with all the information you need to get the
most from your product.
Before you use the Digital Video Baby Monitor, we recommend that you
insert and fully charge the battery in the Parent Unit, so that it continues to
work if you disconnect it from the power supply. Please read the Safety
Instructions on pages 8 - 10 before you install the Units.
Got everything?
• 1 x Parent Unit
• 1 x Baby Unit (Camera)
• 1 x Power adapter for Parent Unit
• 1 x Power adapter for Baby Unit
• 1 x Stargrip
In multi-camera packs, you will find one or more additional Camera Units
with power adapters.
Overview of the Parent Unit
1
12 13
14
15
16
17
2
7
3
8
4
9
5
10
6
11
Display (LCD screen)
VIDEO ON/OFF button V
Press to turn the LCD screen ON/
OFF.
3. TALK button T
Press and hold to speak to your
baby.
4. RESET button (recessed - use small
pin)
5. UP button +
Normal Mode: Tilt camera Up
Menu Mode: Move Up menu
options
6. DOWN button Normal Mode: Tilt camera Down
Menu Mode: Move Down menu
options
7. MENU button M
Press to open / close the Menu
options
8. OK button O
9. Micro USB power adapter socket
10. LEFT button <
Normal Mode: Pan camera Left
Menu Mode: Move Left along menu
options
1.
2.
11. RIGHT button >
12.
13.
14.
15.
16.
17.
18.
19.
Normal Mode: Pan camera Right
Menu Mode: Move Right along
menu options
Charging LED:
Blue when mains power connected.
Parent Unit ON/OFF LED (Green)
Audio Level LEDs (Green, Amber,
Red, Red)
Volume buttons
Press - / + to decrease/increase
Volume level on Parent Unit
Power button 0
Press and Hold to turn the Parent
Unit ON/OFF
Microphone
Stand
Speaker
Parent Unit menu icons
Signal Level Indication (5 Levels)
Night Vision Mode (Video also changes to Black/White)
T
Talk Mode On
Volume Level Indication (4 Levels)
Panning Camera Left
Panning Camera Right
Tilting Camera Up
Tilting Camera Down
Zoom Level Control (1X, 2X)
Brightness Level Control (8 Levels)
Lullaby Control (5 Sound Selections)
Alarm Setting (6h, 4h, 2h, OFF)
On status bar, indicates alarm set, and when flashing, that alarm time has
been reached or missed.
Temperature scale select (oC / oF)
Readings display in BLUE, but turn RED if > 29ºC / 84ºF, or < 14ºC / 57ºF
Displays HH oC / oF if >36oC / 97oF.
Displays LL oC / oF if < 1oC / 34oF.
Camera Control (scan
V
Set Screen Off Timer (Off
, view
, add
, delete
+
, 5 min, 30 min, 60 min)
)
Indicates the screen off timer is set
Volume Level Control (8 Levels)
No Baby Unit detected
View multiple cameras on screen. Available when you have more than 1
Baby Unit (Camera).
Overview of Your Baby Unit
1.
2.
3.
4.
5.
6.
Photo Sensor (Night Vision Mode)
Camera Lens
Infrared LEDs (x 8, for night vision)
Power LED
On when linked to Parent Unit
Flashes when searching for Parent
Unit
Microphone
Camera Battery LED
On when AC power is connected to
camera.
Flashes when the battery level of the
camera is low.
7.
8.
9.
10.
11.
12.
13.
POWER ON/OFF switch
Temperature Sensor
Power Adapter Outlet
PAIR Button
Speaker
Star Grip or Tripod Mount
Antenna
Important guidelines for installing your Baby Monitor
• To use your Video Monitor Baby and Parent Units together, you must be able to
establish a radio link between them, and the range will be affected by environmental
conditions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors or
reinforced concrete between the Baby and Parent Unit may block the radio signal.
• The signal strength may also be reduced by other solid structures, like walls, or by
radio or electrical equipment, such as TVs, computers, cordless or mobile phones,
fluorescent lights or dimmer switches.
• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi® routers),
Bluetooth™ systems, or microwave ovens, may cause interference with this product,
so keep the Baby Monitor away at least 1 metre from these types of products, or turn
them off if they appear to be causing interference
• If the signal is weak, try moving the Parent and/or the Baby Unit to different positions
in the room(s).
Table of contents
1.
2.
Safety Instructions .................................................................................... 7
Getting Started....................................................................................... 10
2.1
2.2
2.3
3.
Using the Baby Monitor .......................................................................... 14
3.1
3.2
3.3
3.4
3.5
3.6
4.
4.7
4.8
4.9
Volume ..................................................................................................... 16
Brightness ................................................................................................. 16
Lullaby ....................................................................................................... 16
Zoom ........................................................................................................ 16
Alarm ......................................................................................................... 16
Camera Control ....................................................................................... 17
4.6.1
Add (pair) a camera .................................................................. 17
4.6.2
View a camera ........................................................................... 17
4.6.3
Delete a camera ........................................................................ 18
4.6.4
Scan camera .............................................................................. 18
Temperature ............................................................................................ 18
Power Saving Mode.................................................................................. 19
View multiple cameras on screen ............................................................ 19
Wi-Fi® Internet Viewing ......................................................................... 20
5.1
5.2
5.3
5.4
6
Setting Up................................................................................................. 14
Pan and Tilt ............................................................................................... 14
Night Vision Mode .................................................................................... 14
Talk Mode ................................................................................................. 14
Video ON/OFF ........................................................................................ 14
Temperature Display (HH °C / °F or LL °C / °F) ..................................... 15
Parent Unit Menu Options ..................................................................... 16
4.1
4.2
4.3
4.4
4.5
4.6
5.
Baby Unit Power Supply........................................................................... 10
Parent Unit Power Supply ........................................................................ 11
Registration (Pairing) ................................................................................ 13
Minimum System Requirements ............................................................. 20
Getting Started - Connecting Devices .................................................... 21
5.2.1
Setup ......................................................................................... 21
User Account and Camera Setup on Android™ Devices...................... 22
5.3.1
Power ON and Connect the Camera ....................................... 22
5.3.2
Download Hubble for Motorola Monitors App ........................ 22
5.3.3
Run Hubble for Motorola Monitors App on Android™
device ........................................................................................ 22
5.3.4
Add the Camera to your account ............................................ 23
User Account and Camera Setup on iPhone®/iPad® ............................ 26
5.4.1
Power ON and Connect the Camera ...................................... 26
Table of contents
5.6
5.7
6.
7.
8.
9.
10.
Disposal of the Device (Environment) ................................................... 36
Cleaning .................................................................................................. 37
Help ......................................................................................................... 38
General Information ............................................................................... 46
Technical Specifications ......................................................................... 51
Table of contents
7
ENGLISH
5.5
5.4.2
Download Hubble for Motorola Monitors App ........................ 26
5.4.3
Run Hubble for Motorola Monitors App on iPhone®/iPad® ... 26
5.4.4
Add the Camera to your account ............................................. 27
Camera Functions: ................................................................................... 32
5.5.1
Connecting the Camera Unit to power ................................... 32
5.5.2
Overview of the Features on Hubble App ............................... 32
Working with PC/Notebook.................................................................... 35
Procedure for Resetting the Camera ...................................................... 35
1. Safety Instructions
WARNING:
Strangulation Hazard: Children
have STRANGLED in cords.
Keep this cord out of the reach
of children (more than 1m (3ft)
away). Never use extension
cords with AC Adapters. Only
use the AC Adapters provided.
8
Safety Instructions
ENGLISH
CAMERA SET UP & USE:
• Choose a location for the Baby Unit that will provide the best view of
your baby in their cot.
• Place the Baby Unit on a flat surface, such as a dresser, desk, or shelf
or mount the Unit to a wall securely using the keyhole slots on the
underside of the stand.
• NEVER place the Baby Unit or cords in the cot or within reach of the
baby (the unit and cords should be more than 1 metre away).
WARNING
This digital video Baby Monitor is compliant with all relevant standards
regarding electromagnetic fields and is, when handled as described in the
User's Guide, safe to use. Therefore, always read the instructions in this User's
Guide carefully before using the device.
• Adult assembly is required. Keep small parts away from children when
assembling.
• This product is not a toy. Do not allow children to play with it.
• This Baby Monitor is not a substitute for responsible adult supervision.
• Keep this User’s Guide for future reference.
• Do not place the Baby Unit or cords in the cot or within reach of the baby (the
unit and cords should be more than 1 metre away)
• Keep the cords out of reach of children.
• Do not cover the Baby Monitor with a towel or blanket.
• Never use extension cords with power adapters. Only use the power
adapters provided.
• Test this monitor and all its functions so that you are familiar with it prior to
actual use.
• Do not use the Baby Monitor near water.
• Do not place the Baby Monitor near a heat source.
• Only use the chargers and power adapters provided. Do not use other
chargers or power adapters as this may damage the device and battery
pack.
Safety Instructions
9
• Do not touch the plug contacts with sharp or metal objects.
CAUTION
The Parent Unit includes a built-in, lithium-ion rechargeable battery pack, which
is not a user-accessible item. If you think the battery needs replacing, please
contact the helpline. Do not try to replace it yourself.
Risk of explosion if battery is replaced by an unapproved battery type.
Dispose of used batteries according to their instructions.
The Unit should be set up and used so that parts of the user's body other than the
hands are maintained at a distance of approximately 8 inches (20 cm) or more.
10
Safety Instructions
2.1
1.
ENGLISH
2. Getting Started
Baby Unit Power Supply
Connect the small plug of the power adapter to the Baby Unit (camera) and
the other end to a suitable mains power socket.
NOTE
Only use the enclosed Power Adapter (5V DC / 1500mA).
2.
3.
Slide the POWER ON/OFF switch to the ON position to turn the Baby Unit
on.
Slide the POWER ON/OFF switch to the OFF position to turn the Baby
Unit off.
IMPORTANT
The Baby Unit is able to operate without power connection up to 3 hours with the
support of built-in rechargeable battery (Ni-MH battery 2.4V, 900mAh). Please
charge the unit at least 16 hours for the first time use.
Getting Started
11
2.2
Parent Unit Power Supply
IMPORTANT
The Parent Unit is assembled with a built-in rechargeable battery pack (Lithium
ion battery 1880mAh, to give up to 5 hours monitor operation), please charge it
for 16 hours before initial use. The battery is not a user-accessible item. Please
contact the helpline if you think it needs replacing.
1.
2.
3.
4.
5.
Connect the micro USB plug of the power adapter to the Parent Unit and
the other end to a suitable mains power socket. Only use the enclosed
power adapter (5V DC / 1500mA) with the micro USB plug.
Press and hold the 0 POWER ON/OFF button for 3 seconds to switch ON
the Parent Unit.
Once the Baby and Parent Units are switched on, the display on the Parent
Unit will show the colour video captured by the Baby Unit, but if the baby's
room is dark, the video will display in black and white, with a
icon
showing, due to the infra-red illumination by the Baby Unit.
If there is no connection or you are out of range, the video display will go
off, a
symbol will appear on the screen, and the Parent Unit will beeps
continually. Move the Parent Unit closer to the Baby Unit until the link is reestablished.
Press and hold the 0 POWER ON/OFF button, until the progress bar
finishes scrolling, to turn OFF the Parent Unit.
NOTE
The battery icon
turns RED to indicate that the battery is low, and the
parent unit will beep every 15 seconds. The battery needs to be recharged; it
will take16 hours to charge fully.
12
Getting Started
Getting Started
13
ENGLISH
When charging
1. If the Parent Unit is turned OFF with the adapter plugged in, a 2-pin plug
logo will appear on-screen for about 5 seconds, and then a flashing battery
logo will display for 15 seconds. The Blue LED at the top left will light up;
indicating that the adapter is plugged in and charging is continuing.
2. Whilst the power is ON, and the adapter is plugged in, the battery icon at
the top right corner of the screen will show that the battery is charging. The
Charging LED at the top left will light up to indicate that the adapter is
plugged in.
2.3
Registration (Pairing)
The Baby Monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedures
below:
1.
2.
3.
4.
5.
Press the M button of the Parent Unit and the menu bar will pop up.
Press the < LEFT button or > RIGHT button until is highlighted, and
del/
add/
view/
scan menu will pop up.
the
add, and press the
Press the ++UP button or - DOWN button to select
+
O button to confirm.
Camera
will pop up, press the + UP button or - DOWN
___
button to select the desired Camera, and press the O button to start
searching for a camera unit, with "press PAIR on cam" shown.
Note: If a camera is currently paired with the Parent Unit, its camera
location (with a * against it) cannot be selected for a new registration.
Press and hold the PAIR button on the underside of the Baby Unit until the
Parent Unit finds the camera, beeps and PAIR OK appears on the screen.
The video from the camera will then appear.
NOTE
If a particular Baby Unit was registered previously, registering this current Baby
Unit again will cancel its old registration.
14
Getting Started
3.1
ENGLISH
3. Using the Baby Monitor
Setting Up
• Place the Baby Unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
• Adjust the angle of the Baby Unit's camera by using the pan and tilt function
from the Parent Unit, to move up, down, left and right until you are satisfied
with the image shown on the Parent Unit.
NOTE
Do not place the Baby Unit within the baby's reach! If there is interference with
the picture or sound, try moving the units to different locations, and ensure they
are not close to other electrical equipment.
3.2
Pan and Tilt
The camera can be remotely controlled from the Parent Unit when in a camera
viewing mode.
1.
2.
3.3
Press the + UP button or - DOWN button to tilt up or down.
Press the < LEFT button or > RIGHT button to pan left or right.
Night Vision Mode
The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in
the dark. When the built-in photo sensor on the top of the Unit detects a low level
of ambient light, the LEDs will automatically activate and the screen on the
Parent Unit will display in black and white. The
icon will be displayed at the
top of the screen.
3.4
Talk Mode
Press and hold the TALK button T on the Parent Unit to talk to your baby through
the Baby Unit’s loudspeaker. The T icon will be displayed at the top of the LCD
screen.
3.5
Video ON/OFF
Press V VIDEO On/Off button to turn the LCD screen on or off, whilst still
leaving the audio monitor on.
Using the Baby Monitor
15
3.6
Temperature Display (HH °C / °F or LL °C / °F)
The temperature reading from the temperature sensor at the back of the Baby
Unit will be displayed at the top of the LCD screen in °C or °F (see 4.7
“Temperature” for how to change). The readings will turn RED if the
temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will
change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading
will change to LL °C / °F if the temperature goes below 1°C / 34°F.
16
Using the Baby Monitor
4.1
1.
4.2
Volume
Press the Volume button - or + to adjust the volume level, the
icon will
pop up and you can select the desired volume from level 0~8. (The default
volume level setting is level 5, and level 0 is OFF
.)
Brightness
1.
Press the M button and the menu bar will pop up.
2.
3.
Press the < LEFT button or > RIGHT button until
is highlighted.
Press the + UP button or - DOWN button to select the desired brightness
from level 1 ~ 8. (The default brightness is level 4.)
4.3
Lullaby
1.
Press the M button and the menu bar will pop up.
2.
3.
Press the < LEFT button or > RIGHT button until
is highlighted.
Press the + UP button or - DOWN button to select from the 5 sounds
available. If a sound is selected, it will repeat continuously until it is
deselected. (The default setting is lullaby OFF.)
4.4
Zoom
1.
Press the M button and the menu bar will pop up with
2.
Press the + UP button or - DOWN button to select 1X or 2X zoom. (The
default setting is 1X.)
4.5
1.
2.
3.
4.
highlighted.
Alarm
Press the M button and the menu bar will pop up.
Press the < LEFT button or > RIGHT button until
is highlighted.
Press the + UP button or - DOWN button to select the alarm time (6h, 4h,
2h), and the
will turn on. (The default setting is Alarm OFF.)
If an alarm time is selected, the Parent Unit will beep for about 1 minute
after every 6, 4 or 2 hour period, and the
will flash. Press any button to
stop the alarm.
Parent Unit Menu Options
17
ENGLISH
4. Parent Unit Menu Options
4.6
Camera Control
4.6.1
1.
2.
3.
4.
5.
Add (pair) a camera
Press the M button and the menu bar will pop up.
Press the < LEFT button or > RIGHT button until is highlighted, and
the
del/
add/
view/
scan menu will pop up.
add, and press the
Press the ++UP button or - DOWN button to select
+
O button to confirm.
Camera
will pop up, press the + UP button or - DOWN
___
button to select the desired Camera, and press the O button to start
searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its camera
location (with a * against it) cannot be selected for a new registration.
Press and hold the PAIR button on the underside of the Baby Unit until the
Parent Unit finds the camera, beeps and PAIR OK appears on the screen.
The video from the camera will then appear.
NOTE
A camera can only be registered to one Parent Unit at any one time.
4.6.2
1.
2.
3.
4.
View a camera
Press the M button and the menu bar will pop up.
Press the < LEFT button or > RIGHT button until is highlighted, and
del/
add/
view/
scan menu will pop up.
the
Press the ++UP button or - DOWN button to select
view, and press
the O button to confirm.
Camera
will pop up. Press the + UP button or - DOWN
___
button to select the desired camera, and press the O button to view the
picture from that camera.
Note: Only camera locations with a * can be selected.
TIP
Quick Method to View Cameras instead of entering into the menu bar.
Directly press the O button repeatedly to select the available Camera
options from
,
,
,
,
..
18
Parent Unit Menu Options
1.
2.
3.
4.
5.
Delete a camera
ENGLISH
4.6.3
Press the M button and the menu bar will pop up.
Press the < LEFT button or > RIGHT button until is highlighted, and
the
del/
add/
view/
scan menu will pop up.
del, and press the
Press the ++UP button or - DOWN button to select
O button to confirm.
Camera
___ will pop up, press the + UP button or - DOWN
button to select the desired Camera, and press the O button.
Press the + UP button or - DOWN button to select
, then press the
O button to delete that registration.
NOTE
You are not allowed to delete the camera if there is only one registered camera
in the system.
4.6.4
Scan camera
This function is only available when you have more than 1 Baby Unit (Camera).
Press the M button and the menu bar will pop up.
Press the < LEFT button or > RIGHT button until is highlighted, and
del/
add/
view/
scan menu will pop up.
the
scan, and press the
3. Press the ++UP button or - DOWN button to select
O button to confirm.
4. The screen will then display images from different registered cameras in a
loop of Camera
, changing about every 12 seconds.
___
1.
2.
TIP
Quick Method to View Cameras instead of entering into the menu bar.
Directly press the O button repeatedly to select the available Camera
options from
.
,
,
,
,
4.7
1.
2.
3.
Temperature
Press the M button and the menu bar will pop up.
Press the < LEFT button or > RIGHT button until
is highlighted.
Press the + UP button or - DOWN button to select °C or °F.
Parent Unit Menu Options
19
4.8
1.
2.
3.
Power Saving Mode
Press the M button and the menu bar will pop up.
Press the < LEFT button or > RIGHT button until V is highlighted.
Press the + UP button or - DOWN button to select auto video off after
5 mins, 30 mins or 60 mins if operating on batteries only.
NOTE
The audio will remain and you can press any key to switch the video back on.
4.9
View multiple cameras on screen
This function is only available when you have more than 1 Baby Unit (Camera).
When the Split Screen function is On, you can view multiple cameras on the
screen, although only hear audio from one screen at a time.
1.
2.
3.
4.
Press the M button and the menu bar will pop up.
Press the < LEFT button or > RIGHT button until
is highlighted.
Press the + UP button or - DOWN button to select Split Screen On
/
Off
.
When the Split Screen function is On, you can press the < LEFT button or
> RIGHT button/ + UP button or - DOWN button to switch between
cameras to hear the audio from the selected camera, indicated by the red
frame.
Note:
When in multi-screen mode the TALK button operates with the selected camera.
If you want to play a lullaby sound through a camera, you must set this before
selecting the multi-screen mode.
Zoom does not work in multi-screen mode.
20
Parent Unit Menu Options
5.1
ENGLISH
5. Wi-Fi® Internet Viewing
Minimum System Requirements
Web Portal
•
•
•
•
•
•
•
•
Windows® 7
Mac OS® 10.7
Chrome™ 24
Internet Explorer® 9
Safari® 6
Java™ 7
Firefox® 18.0
Adobe® Flash® Player 15.0
Android™ System
• Version 4.2 or above
iPhone®/iPad® iOS
• Version 7.0 or above
High Speed (Wi-Fi®) Internet
• At least 0.6 Mbps upload bandwidth per camera (you can test your internet
speed on this site: http://www.speedtest.net)
Wi-Fi® Internet Viewing
21
5.2
Getting Started - Connecting Devices
How does it work?
MBP855CONNECT
Camera
Wi-Fi Router
Access your
Camera locally.
View your Camera from any
compatible device remotely.
Hubble
Service
When a user tries to access the Camera, the Hubble server will authenticate the
user’s identity before it grants access to the Camera.
5.2.1
Setup
• Connect the power adapter to a suitable mains power socket and insert the
plug into the micro USB socket on the back of the Camera Unit.
• Slide the ON/OFF switch to the ON position.
• The Camera Unit must be within range of the Wi-Fi® router with which you
want to connect. Make sure that you have the password of the router for the
setup process.
Behavior of the status Indicator LED:
Pairing and setting up
Flashes slowly in red and blue
Unconnected
Flashes slowly in blue
Connected
Lights up in blue
Ready for connection
Flashes slowly in blue
Note
You can only setup via a compatible smartphone or tablet, and not via a PC.
22
Wi-Fi® Internet Viewing
User Account and Camera Setup on Android™ Devices
ENGLISH
5.3
What you need
• Wi-Fi® Camera Unit
• Power adapter for the Camera
• Device with AndroidTM system version 4.2 and above
5.3.1
Power ON and Connect the Camera
• Connect the power adapter to a suitable mains power socket and insert the
plug into the micro USB socket on the back of the Camera Unit.
• Make sure that the ON/OFF switch is in the ON position.
• The Camera’s Red LED flashes after the Camera has finished booting. When
you hear one beep, this means that the Camera is ready for setup.
5.3.2
Download Hubble for Motorola Monitors App
• Go to Google Play™ Store to search for "Hubble for Motorola Monitors".
• Download "Hubble for Motorola Monitors" App from Google Play™ Store
and install it on your Android™ device
5.3.3
Run Hubble for Motorola Monitors App on Android™ device
• Ensure that your Android™ device is connected to your Wi-Fi® router.
• Run "Hubble for Motorola Monitors" App, enter your account information,
read through the Terms of Service, then select "I agree to the Terms of Use"
before you tap Create. (Picture A1)
Note
If you already have a Hubble App account, please select Already have an
Account? to go to the next step.
A1
Wi-Fi® Internet Viewing
23
5.3.4
• Tap
Add the Camera to your account
on the top right corner of the screen to add camera. (Picture A2)
A2
• The following setup instructions will appear on the screen. (Picture A3)
A3
• Plug in and switch on the camera, and wait for a couple of minutes for it to
warm up.
• Tap Continue when the Camera LED starts to blink.
24
Wi-Fi® Internet Viewing
ENGLISH
• The following setup instructions will appear on the screen. (Picture A4)
A4
• Press and hold the PAIR button on the bottom of the Camera Unit for 3
seconds. You will then hear a beep tone, followed by a voice prompt
indicating that the Camera is ready for pairing.
• Tap Continue.
• The App will automatically search for and connect to your Camera as shown
in the pictures below. (Pictures A5, A6)
• The blue/red colour LED on the Camera Unit will flash.
A5
Wi-Fi® Internet Viewing
A6
25
• Select your Wi-Fi® Network, enter your password and then tap Connect.
(Pictures A7, A8)
A8
A7
• It will take a few minutes for the Camera to connect to the Wi-Fi® network
before showing the connection status. (Pictures A9, A10)
• If connection fails, please tap Retry and repeat the steps starting from 5.3.4.
A9
A10
• Tap View Camera to view the video captured by the Camera Unit. The LED
indicator on the Camera Unit will light up in blue.
26
Wi-Fi® Internet Viewing
User Account and Camera Setup on iPhone®/iPad®
ENGLISH
5.4
What you need
• Wi-Fi® Camera Unit
• Power adapter for the Camera
• iPhone® / iPad® with iOS version 7.0 and above
5.4.1
Power ON and Connect the Camera
• Connect the power adapter to a suitable mains power socket and insert the
plug into the micro USB socket at the back of the Camera.
• Make sure that the ON/OFF switch is in the ON position.
• The Camera's red LED flashes after the Camera has finished booting. When
you hear one beep, this means that the Camera is ready for setup.
5.4.2
Download Hubble for Motorola Monitors App
• Go to App Store to search for "Hubble for Motorola Monitors".
• Download "Hubble for Motorola Monitors" App and install it on your iPhone®/iPad®.
5.4.3
Run Hubble for Motorola Monitors App on iPhone®/iPad®
• Ensure that your iPhone®/iPad® is connected to your Wi-Fi® Router.
• Run the "Hubble for Motorola Monitors" App, enter your account
information, read through the Terms of Service, and then select "I agree to
the Terms of Service" before you tap Create. (Picture i1)
NOTE
If you already have a Hubble App account, please select Already have an
Account? to go to the next step (Picture i1).
i1
Wi-Fi® Internet Viewing
27
5.4.4
• Tap
Add the Camera to your account
on the top right corner of the screen to add camera. (Picture i2)
i2
• The following Bluetooth setup instructions will appear on the screen. (Picture
i3)
i3
28
Wi-Fi® Internet Viewing
ENGLISH
• Tap Settings and activate Bluetooth on your iPhone®/iPad®. (Pictures i4,i5)
i5
i4
• Press the HOME key to return to the home screen, then tap on "Hubble for
Motorola Monitors" App to resume setup.
• The following setup instructions will appear on the screen. (Picture i6)
Note that if Bluetooth is on, you will be brought to this step directly.
i6
• Wait for a couple of minutes for the Camera Unit to warm up and tap
Continue when the Camera LED indicator starts to blink.
Wi-Fi® Internet Viewing
29
• The following will appear on the screen. Select the Camera ID detected on
your iOS® device and tap Connect. (Pictures i7, i8)
i7
i8
• Name the location of your Camera Unit and tap Continue. (Pictures i9, i10)
i9
30
i10
Wi-Fi® Internet Viewing
i12
i11
• Select your Wi-Fi® network and tap Continue. (Picture i13)
• Enter your Wi-Fi® password and tap Next. (Picture i14)
i13
i14
• It will take a few minutes for the Camera Unit to connect to the Wi-Fi®
network before showing the connection status. (Pictures i15, i16)
Wi-Fi® Internet Viewing
31
ENGLISH
• The Camera Unit will search for the Wi-Fi® network (Picture i11) and display
a list of available networks. (Picture i12)
• If connection fails, tap Retry and repeat the steps starting from 5.4.4.
i15
i16
• Tap View Live Camera to view the video captured by the Camera Unit. The
LED indicator on the Camera Unit will light up in blue.
32
Wi-Fi® Internet Viewing
Camera Functions:
5.5.1
Connecting the Camera Unit to power
• Connect the power adapter to a suitable mains power socket and insert the
plug into the micro USB socket on the back of the Camera Unit.
• Slide the ON/OFF switch to the ON position. The power indicator LED will
light up in green. (Note: To switch off the device, slide the ON/OFF switch to
OFF.)
• Run the Hubble App on your smart device.
5.5.2
Overview of the Features on Hubble App
Menu
• Tap Cameras
to access the camera list.
to access the video record
• Tap Event Log
list that is triggered by Motion or Sound
detection.
• Tap Account
to access user Profile,
subscription Plan, Notifications setting, Remote
Connection Setting and About Hubble
Photo/Video
• Take a photo or record a video from your
Camera.
to activate Video
• Tap the Video icon
to
function. Tap and hold the red button
start recording and release to stop.
to switch to Camera
• Tap the Camera icon
mode. You can capture photos from Camera
view.
NOTE
Photos and videos will be stored in the internal
flash memory of your smart device, and can be
accessed via the Gallery or Media Player
(AndroidTM Device). To play videos, please use
the Hubble App.
Wi-Fi® Internet Viewing
33
ENGLISH
5.5
34
Lullaby
Tap to access the Melody menu and select one of
the 5 pre-set melodies you wish to play on your
Camera Unit.
Temperature
Measure
The temperature reading from the temperature
sensor at the back of the Camera Unit will display
on the screen of your Android™ device. The
readings will turn RED if the temperature goes
beyond the High/Low temperature that was set in
your Account.
Two-way
communication
Tap to activate the function. Press the round
once to speak through the Camera
button
Unit. Toggle the button again to listen to the audio
feedback from the Camera Unit.
Speaker
Tap to toggle speaker on or off.
Zoom
Slide the scroll bar on the right hand side of the
screen to zoom in or zoom out.
You can also use the pinch-in and pinch-out
gestures to zoom out or zoom in a picture.
To use pinch-to-zoom gesture, your device must
support multi-touch technology.
Wi-Fi® Internet Viewing
You can change the Camera settings by tapping
Settings icon.
on the
• Tap Details to review Camera Name, Cloud
Subscription, Change Image, Timezone,
Camera Model, Firmware Version and Delete
All Events.
• Tap Notifications to set the sensitivity of Sound
Detection, Motion Detection and to set Alerts
for High temperature (Up to 33 oC or 91 oF) /
Low temperature (down to 10o C or 50 oF).
• Tap Settings to set Ceiling mount, Brightness
and Volume.
Add Camera
Enter Add Camera procedures.
Delete All Events
Tap to delete all events.
Select Events
Check the box to select recorded event(s).
Edit Events
Tap to select and delete event(s).
Delete Events
Tap to delete selected event(s).
Wi-Fi® Internet Viewing
ENGLISH
Camera Setting
35
5.6
Working with PC/Notebook
• Go to https://app.hubbleconnected.com/#login
Enter your User Name and Password, and then click Login if you have already
created an account.
• Click on the Camera list paired in your account via Android™ device or
iPhone®/iPad®, and the Camera view will appear on screen. You can easily
stay connected with your favorite people, places and pets with live video
streaming.
• On the website, you can change the Settings by following the menu
instructions.
5.7
Procedure for Resetting the Camera
Note: If your Camera is moved from one router (e.g. home) to another (e.g.
office) or you have Camera setup issues, then the Camera must be reset. Please
reset the Camera with the following procedures:
1.
2.
3.
4.
36
Slide the ON/OFF switch to OFF.
Press and hold the PAIR button, then slide the ON/OFF switch to ON.
Release the PAIR button when you hear a confirmation beep and wait for
the Camera Unit to complete an internal reset procedure. The LED
indicator will turn red and flash slowly when the Camera Unit is reset
successfully.
You can add your Camera again by following the steps in section 5.3.4 for
AndroidTM devices or in section 5.4.4 for iOS® devices.
Wi-Fi® Internet Viewing
ENGLISH
6. Disposal of the Device (Environment)
At the end of the product life cycle, you should not dispose of
this product with normal household waste. Take this product to
a collection point for the recycling of electrical and electronic
equipment. The symbol on the product, user's guide and/or
box indicates this.
Some of the product materials can be re-used if you take them
to a recycling point. By reusing some parts or raw materials from used products
you make an important contribution to the protection of the environment.
Please contact your local authorities in case you need more information on the
collection points in your area.
Dispose of the battery pack in an environmentally-friendly manner according to
your local regulations.
Disposal of the Device (Environment)
37
7. Cleaning
Clean your Digital Video Baby Monitor with a slightly damp cloth or with an antistatic cloth. Never use cleaning agents or abrasive solvents.
Cleaning and care
• Do not clean any part of the Digital Video Baby Monitor with thinners or other
solvents and chemicals - this may cause permanent damage to the product
which is not covered by the warranty.
• Keep your Digital Video Baby Monitor away from hot, humid areas or strong
sunlight, and do not let it get wet.
• Every effort has been made to ensure high standards of reliability of your
Digital Video Baby Monitor. However, if something does go wrong, please
do not try to repair it yourself - contact Customer Service for assistance.
IMPORTANT
Always switch off and disconnect the power adapter before cleaning your
Digital Video Baby Monitor.
38
Cleaning
Display
No display
• Try recharging or replacing the battery pack.
• Reset the Units. Disconnect the battery pack of the Parent Unit and unplug
both the Units' electrical power, then plug them back in.
• Is the Unit switched on?
Press and hold the ON/OFF button 0 on the Parent Unit to switch it ON.
• Is the correct camera selected? Change the camera number, if necessary.
• Is the video display turned on? Press the VIDEO ON/OFF button V to turn it
ON.
• When operating using batteries only, the display will go blank after 5 minutes
or 30 minutes or 60 minutes to save power (depending on video settings).
The Unit is still active and will give you audio alerts. You can reactivate the
screen by pressing any button.
Registration
If the Baby Unit has lost its link with the Parent Unit
• Try recharging or replacing the battery pack.
• If the Baby Unit is too far away it may be going out of range, so move the
Baby Unit closer to the Parent Unit.
• Reset the Units by disconnecting them from the battery and electrical power.
Wait about 15 seconds before reconnecting. Allow up to one minute for the
Baby Unit and the Parent Unit to synchronise.
• See 2.3 Registration (Pairing), if there is a need to re-register the Units.
Interference
Noise interference on your Parent Unit
• Your Baby and Parent Units may be too close. Move them further apart.
• Make sure there is at least 1 to 2m between the 2 Units to avoid audio
feedback.
• lf the Baby Unit is too far away, it may be out of range. Move the Baby Unit
closer to the Parent Unit.
Help
39
ENGLISH
8. Help
• Make sure that the Baby and Parent Units are not near other electrical
equipment, such as a television, computer or cordless/mobile telephone.
• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi® routers),
Bluetooth™ systems, or microwave ovens, may cause interference with this
product. Keep the Baby Monitor at least 1.5m away from these types of
products, or switch them off if they appear to be causing interference.
• If the signal is weak, try moving the Parent and/or Baby Unit to different
positions in the rooms.
Noise interference on your device
• To avoid background noise or echoes, ensure that there is enough distance
between your device and the Wi-Fi® Camera Unit.
• Use of other 2.4 GHz products, such as Bluetooth™ systems or microwave
ovens, may cause interference with this product. Keep the Wi-Fi® Camera
Unit at least 1.5m away from these types of products, or switch them off if
they appear to be causing interference.
Lost connection
• Check your Wi-Fi® settings. If necessary, reconnect your Wi-Fi®. Ensure that
the Wi-Fi® Camera Unit is switched ON. Wait a few minutes to make the
connection with the Wi-Fi® system.
If you forgot your password
• If you do not remember your password, tap Forgot Password and submit your
e-mail address. A new password will be sent to your e-mail address
immediately.
40
Help
Category
Problem
Description / Error
ENGLISH
Troubleshooting for Wi-Fi® Internet Viewing
Solution
Account
I am unable to login
Please check your user name and
even after registration. password.
Account
I receive an error
Please ensure that you have
message saying: "Email registered with us. Tap Create
ID is not registered".
Account to create an account.
Account
What do I do if I forget Click on the "Forgot Password" link on
https://app.hubbleconnected.com/
my password?
#lostpassword OR on your Android™
or iOS application. An email will be sent
to your registered email address.
Account
I am unable to receive a 1.
new password although
I have used the "Forgot
2.
password" option.
The e-mail might have been sent
to your Junk Mail Folder. Please
check your Junk Mail Folder.
There might be a delay in getting
your e-mail. Please wait a few
minutes and refresh your email
account.
Connectivity I get a message: We
1.
Issues
are having problems
accessing your
Camera. This could be
2.
due to the lack of an
internet connection.
Please wait and try
3.
again later.
Please try again in a few minutes.
This could be because of any
issue with your internet
connection.
If the problem remains, please
restart your Camera to check if
this fixes the problem.
Please restart your Wireless
Router.
Help
41
Viewing
Camera
When I am in "remote
mode", the video stops
after 5 minutes. How
do I view for longer?
When you are accessing your Camera
via a network different from your
home network (over the internet) your
video times out after 5 minutes.
You can click on the Camera again
from the Android™/iOS application
to start streaming again.
If you are accessing from your webbrowser, then you can press on the
Reload button to start viewing your
Camera video stream again.
Features
The sound alert setting You can Adjust Sound Sensitivity to
threshold is not right. trigger notifications under Camera
Setting menu.
Setting Up
While I am adding a
new Camera to my
account, I am not able
to find any Cameras to
add.
If you are trying to add a Camera
which has previously been added into
your account or another account, you
will first have to reset the Camera. This
can be done by pressing and holding
the PAIR button at the bottom of the
Camera for 5 seconds.
General
What are the
supported browsers for
accessing from my PC/
Mac?
We recommend using Google
Chrome 24 or above. However the
following browsers are also supported:
Internet Explorer 9.0 or above (for PC),
Safari 6.0 or above (for Mac) or Firefox
18.0 or above (both PC or Mac).
42
Help
What is the
significance of LED
flashing?
A flashing LED indicates the following
status:
Slow flashing: 1. Your Camera is in
setup mode. You can add the Camera
to your account in this mode. Out of the
box, the Camera is in Setup mode. To
reset to Setup mode, press and hold the
PAIR button on the bottom of the
Camera untill you hear a beep.
Slow flashing: 2. The Camera is either
connecting to the router or has lost the
link to the router. Please ensure that the
Camera is in the Wi-Fi® signal range.
LED is stable: The Camera is
connected to the Wi-Fi® network.
Connectivity I am not able to access Please check if the Camera is within
Wi-Fi® range. If the LED on your Camera
Issues
my Camera.
is flashing slowly, please try to move the
Camera closer to the router for better
Wi-Fi® connectivity and try again.
Setting Up
Help
During setup on
devices for Android™
and iOS, I am not able
to find my Camera
during the last step and
the setup fails.
Please reset the Camera to setup
mode and try again. Press and hold
the PAIR button on the bottom of the
Camera untill you hear a beep. Wait
for a minute for the Camera to restart.
When the Camera LED is flashing, this
indicates that it is in setup mode. Now
restart the setup from your smartphone
again.
43
ENGLISH
General
Connectivity Even though I am
Issues
accessing my Camera
from the same Wi-Fi®
network, I still find my
Camera is shown as
remote. I can only
access it for 5 minutes
at a time.
Please check your wireless router
settings. For example, for Buffalo
brand routers there is an option called
Wireless Isolation. Please disable this
option.
Camera
When I try to view the
Camera, I get a prompt
for Camera firmware
upgrade. What should I
do?
Please upgrade your firmware. This
takes around 5 minutes. We push
upgrades from time to time to
improve Camera features.
General
Which platforms are
Minimum requirement:
Windows® 7*
supported for
accessing my Camera? *Java browser plug-in needed
Mac OS® version 10.7
Chrome™ version 24
Internet Explorer® version 9
Safari® version 6
Java™ version 7
Firefox® version 18.0
Adobe® Flash® Player 15.0
Android™ 4.2
iPhone® /iPad® iOS version 7.0
General
I do not hear any sound You can tap on the speaker icon in the
when I am accessing a video stream screen to hear audio. By
remote Camera.
default the audio is not ON when you
are accessing a remote Camera.
44
Help
What is the meaning of When you are accessing your Camera
"Local Camera" and
from the same wireless network (Home)
"Remote Camera"?
in which it is configured,
it is a Local Camera. When you are
accessing your Camera away from your
home it is a Remote Camera. You may
be using 3G, 4G or 4G LTE or a Wi-Fi®
connection outside of your home.
General
How do I download the Android™:
App for Android™ and - Open the Google Play Store on
iOS devices?
your Android™ device.
- Select Search
- Type in "Hubble for Motorola
Monitors"
- The results will show the Hubble
App
- Select to install it
iOS Device:
- Open the App StoreSM
- Select Search
- Type in "Hubble for Motorola
Monitors"
- The results will show the Hubble
App
- Select to install it
Setting up
When the video is cut You will need to turn off the Auto Lock
off, the application
function of your device to ensure
attempts to reconnect continuous video/audio streaming.
and this results in lost
sound and choppy
video.
Help
45
ENGLISH
General
Features
How many users can
access the Camera at
one time?
Connectivity I found interference
issues
caused by my other
webcam devices.
46
If you are accessing in Local Mode,
two users are supported, after two
users all streaming will go through the
remote server. This allows for
unlimited user access to a single
Camera at one time.
Video streaming performance is
related to internet bandwidth,
especially if you have 2 or more video
streaming devices that are working
through the same router.
Help
ENGLISH
9. General Information
If your product is not working properly...
1.
2.
3.
Read this User's Guide or the Quick Start Guide.
Visit our website: www.motorolahome.com
Contact Customer Service at
+44 (0) 844 557 0890(UK only)*
*
Calls cost 7p per minute plus your telephone company's access charge
+44 (0) 8187 62092 (ROI)
To order a replacement battery pack for parent Unit, contact customer service.
Consumer Products and Accessories Limited Warranty
("Warranty")
Thank you for purchasing this Motorola branded product manufactured under
license by Binatone Electronics International LTD ("BINATONE")
What Does this Warranty Cover?
Subject to the exclusions contained below, BINATONE warrants that this
Motorola branded product ("Product") or certified accessory ("Accessory") sold
for use with this product that it manufactured to be free from defects in materials
and workmanship under normal consumer usage for the period outlined below.
This Warranty is your exclusive warranty and is not transferable.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
HAVE OTHER RIGHTS THAT VARY BY STATE, PROVINCE OR COUNTRY.
FOR CONSUMERS WHO ARE COVERED BY CONSUMER PROTECTION
LAWS OR REGULATIONS IN THEIR COUNTRY OF PURCHASE OR, IF
DIFFERENT, THEIR COUNTRY OF RESIDENCE, THE BENEFITS
CONFERRED BY THIS LIMITED WARRANTY ARE IN ADDITION TO ALL
RIGHTS AND REMEDIES CONVEYED BY SUCH CONSUMER PROTECTION
LAWS AND REGULATIONS. FOR A FULL UNDERSTANDING OF YOUR
RIGHTS YOU SHOULD CONSULT THE LAWS OF YOUR COUNTRY,
PROVINCE OR STATE.
General Information
47
Who is covered?
This Warranty extends only to the first consumer purchaser, and is not
transferable.
What will BINATONE do?
BINATONE or its authorised distributor at its option and within a commercially
reasonable time, will at no charge repair or replace any Products or Accessories
that do not conform to this Warranty. We may use functionally equivalent
reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT
PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR
BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF
THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE
ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE
FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some jurisdictions do not allow the limitation or exclusion of incidental or
consequential damages, or limitation on the length of an implied warranty, so
the above limitations or exclusions may not apply to you. This Warranty gives
you specific legal rights, and you may also have other rights that vary from one
jurisdiction to another.
48
General Information
Length of Coverage
One (1) year from the date of the
products original purchase by the first
consumer purchaser of the product.
Consumer Accessories
Ninety (90) days from the date of the
accessories original purchase by the first
consumer purchaser of the product.
Consumer Products and Accessories The balance of the original warranty or
that are Repaired or Replaced
for ninety (90) days from the date
returned to the consumer, whichever is
longer.
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts
due to normal wear and tear are excluded from coverage.
Batteries. Only batteries whose fully charged capacity falls below 80% of their
rated capacity and/or batteries that leak are covered by this Warranty.
Abuse & Misuse. Defects or damage that result from: (a) improper operation,
storage, misuse or abuse, accident or neglect, such as physical damage (cracks,
scratches, etc.) to the surface of the product resulting from misuse; (b) contact
with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the
like, extreme heat, or food; (c) use of the Products or Accessories for
commercial purposes or subjecting the Product or Accessory to abnormal
usage or conditions; or (d) other acts which are not the fault of MOTOROLA or
BINATONE, are excluded from coverage.
Use of Non-Motorola branded Products and Accessories. Defects or damage
that result from the use of Non-Motorola branded or certified Products or
Accessories or other peripheral equipment are excluded from coverage.
General Information
49
ENGLISH
Products Covered
Consumer Products
Unauthorised Service or Modification. Defects or damages resulting from
service, testing, adjustment, installation, maintenance, alteration, or
modification in any way by someone other than MOTOROLA, BINATONE or its
authorised service centres, are excluded from coverage.
Altered Products. Products or Accessories with (a) serial numbers or date tags
that have been removed, altered or obliterated; (b) broken seals or that show
evidence of tampering; (c) mismatched board serial numbers; or (d)
nonconforming or non-Motorola branded housings, or parts, are excluded from
coverage.
Communication Services. Defects, damages, or the failure of Products or
Accessories due to any communication service or signal you may subscribe to
or use with the Products or Accessories is excluded from coverage.
How to Obtain Warranty Service or Other Information?
To obtain service or information, please call:
+44 (0) 844 557 0890 (UK only)*
*
Calls cost 7p per minute plus your telephone company's access charge
+44 (0) 8187 62092 (ROI)
You will receive instructions on how to ship the Products or Accessories at your
expense and risk, to a BINATONE Authorised Repair Centre.
To obtain service, you must include: (a) the Product or Accessory; (b) the
original proof of purchase (receipt) which includes the date, place and seller of
the Product; (c) if a Warranty card was included in your box, a completed
Warranty card showing the serial number of the Product; (d) a written
description of the problem; and, most importantly; (e) your address and
telephone number.
These terms and conditions constitute the complete warranty agreement
between you and BINATONE regarding the Products or Accessories purchased
by you, and supersede any prior agreement or representations, including
representations made in any literature publications or promotional materials
issued by BINATONE or representations made by any agent, employee or staff
of BINATONE, that may have been made in connection with the said purchase.
50
General Information
ENGLISH
BINATONE TELECOM PLC
1 Apsley Way London NW2 7HF,United Kingdom.
Tel: +44(0) 20 8955 2700 Fax: +44(0) 20 8344 8877
e-mail: binatoneuk@binatonetelecom.co.uk
________________________________________
.
EC Declaration of Conformity
We the manufacturer / Importer :
Binatone Telecom Plc
1 Apsley Way London
NW2 7HF, United Kingdom.
Declare under our sole responsibility that the following product
5” Portable Digital Video Baby Monitor with Wi-Fi ®
Type of equipment:
MBP855CONNECT, MBP855CONNECT-2,
Model Name:
MBP855CONNECT-3, MBP855CONNECT-4
China
Country of Origin:
Motorola
Brand:
complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the
approximation of the laws of the Member States relating to Radio Spectrum Matters, the
Council Directive
/108/EC on the approximation of the laws of the Member States
relating to electromagnetic compatibility (EMC) and the European Community Directive
2006/95/EC relating to Electrical Safety. Directive 2011/65/EC on the restriction of use of
hazardous substances (RoHS) and 2009/125/EC relating to ecodesign requirement for
Energy-Related Products (ErP).
Assessment of compliance of the product with the requirements relating to the essential
requirements according to Article 3 R&TTE was based on Annex III of the Directive
1999/5/EC and the following standard:
Radio Spectrum:
EMC:
Electrical Safety:
RF Safety:
LED Measurement:
ErP:
EN300328 V1.9.1:2012
EN301489-17 V2.2.1
EN301489-1 V1.9.2 (2011-09)
EN 60950-1: 2006+A11: 2009+A1: 2010+A12: 2011+A2: 2013
EN62479:2010 (For Baby Unit), EN50385:2002 (For Parent Unit)
EN62471:2008
IM1275 with Amd 801/2013
The product is labelled with the European Approval Marking CE as show. Any Unauthori ed
modification of the product voids this Declaration.
Manufacturer / Importer
(Signature of authori ed person)
London, 29 December, 2016
Karl Heinz Mueller / Chief Technical Officer
General Information
Place & Date
51
10. Technical Specifications
BABY UNIT
Frequency
2.4GHz to 2.48 GHz
Image sensor
colour CMOS 1M Pixels
Operating Temperature 0oC - 45oC
IR LED
6 pcs
Power Adapter
Ten Pao International Ltd.
S012BEB0500150
Input: 100-240V AC, 50/60Hz, 500mA;
Output: 5.0V DC, 1500mA
WARNING
Use only with supplied power supply.
Battery (built-in)
GPI INTERNATIONAL LTD.
2.4V, 900mAh Ni-MH, rechargeable battery pack
(gives up to 3 hours operation)
WARNING
Do not attempt to replace the battery, but
contact Customer Service if it needs replacing.
52
Technical Specifications
Frequency
ENGLISH
PARENT UNIT
2.4 GHz to 2.48 GHz
Display
5" diagonal TFT LCD
Display Colours
16.7M colour LCD
Operating Temperature 0oC - 45oC
Brightness Control
8 steps
Volume Control
8 steps + Off
Power Adapter
Ten Pao International Ltd.
S012BEB0500150
Input: 100-240V AC, 50/60Hz, 500mA;
Output: 5.0V DC, 1500mA
WARNING
Use only with provided power supply.
Battery (built-in)
LG Chemical Limited (Motorola BF6X)
3.7V, 1880mAh Lithium-Ion Polymer, rechargeable
battery pack (gives up to 5 hours operation)
WARNING
Do not attempt to replace the battery, but contact
Customer Service if it needs replacing.
Technical Specifications
53
Manufactured, distributed or sold by Binatone Electronics International LTD.,
official licensee for this product. MOTOROLA and the Stylised M logo are
trademarks or registered trademarks of Motorola Trademark Holdings, LLC.
and are used under license. Apple logo and Safari are trademarks of Apple Inc.,
registered in the U.S. and other countries. App Store is a service mark of Apple
Inc. Google Play, Android, and Chrome are trademarks of Google Inc. Wi-Fi is
a trademark of the Wi-Fi Alliance. Internet Explorer and Windows are
trademarks of the Microsoft group of companies. Firefox is a registered
trademark of the Mozilla Foundation. Adobe and Flash are either registered
trademarks or trademarks of Adobe Systems Incorporated. Java is a registered
trademark of Oracle and/or its affiliates. All other trademarks are the property of
their respective owners. © 2017 Motorola Mobility LLC. All rights reserved.
UK_EN Version 1.0
Printed in China