stainless steel - Encore Plumbing

STAINLESS STEEL
Stainless Steel Plumbing
Type 304/316 Stainless Steel Construction
• Furnished with 1/2’ inlets
• 1/4-Turn Compression Cartridge with S/S components
• In-Line check valves prevent cross-flow and backflow siphoning
ELIMINATE LEAD FROM YOUR PLUMBING
CHG has added a new series of Stainless Steel Plumbing Fixtures to the Encore® Premium Plumbing line, which are designed
to meet or exceed evolving Low Lead and No Lead standards in the U.S. and abroad, such as California (AB1953) and
Vermont (S152). The federal Safe Drinking Water Act strictly regulates the amount of lead permitted to leach from end point
devices in potable water supplies and establishes ANSI/NSF 61 - Section 9 as the performance testing standard.
These durable Encore faucets and pre-rinse units feature Type 304/316 stainless steel construction throughout, which
eliminates the lead found in competing brass products and exceeds the testing parameters to meet ANSI/NSF 61 – Section 9.
CHG
®
Water conserving aerators and laminar
flow spout tips available upon request.
See Page 106 For Options
Stainless Steel Service Sink
Wall Mount Faucet
Stainless Steel Double Pantry
Deck Mount Faucet
Model
Spout Size
Model
3-1/2” (89mm)-Shown
KSS54-8000SE1
3-1/2” (89mm)
3-1/2” (89mm)
KSS54-8000RE1
3-1/2” (89mm)
Spout Size
Swivel Gooseneck Spout
KSS61-8000SE1
Rigid Gooseneck Spout
Rigid Gooseneck Spout
KSS51-9000RE1
Model
Swivel Gooseneck Spout
Swivel Gooseneck Spout
KSS51-9000SE1
Spout Size
Stainless Steel 8” (203mm) Bridge
Deck Mount Faucet
Rigid Gooseneck Spout
KSS61-8000RE1
Swing Spout
Swing Spout
3-1/2” (89mm)-Shown
3-1/2” (89mm)
Swing Spout
KSS51-9006SE1
6” (152mm)
KSS54-8006SE1
6” (152mm)
KSS61-8006SE1
6” (152mm)
KSS51-9012SE1
12” (305mm)
KSS54-8012SE1
12” (305mm)- Shown
KSS61-8012SE1
12” (305mm)- Shown
Stainless Steel Gooseneck Spout
Model
KN11-X000-SS
Spout Size
3-1/2” (89mm)
Rigid Spout
KN11-X100-SS
106
Stainless Steel Tubular Spout
Model
Spout Size
KN11-X006-SS
6” (152mm)
KN11-X012-SS
12” (305mm)
Spout Extension
Model
KN11-X112-SS
Spout Size
12” (305mm)
3-1/2” (89mm)
www.encoreplumbing.com
Tel. 1.800.526.3694
Fax 1.732.364.8110
STAINLESS STEEL
Stainless Steel Plumbing
Type 304/316 Stainless Steel Construction
Pre-Rinse Assemblies
CHG
®
• Furnished with 1/2” NPS male inlets
• Low Flow 1.2 GPM @ 60 PSI pre-rinse spray valve also available
• 1/4 Turn Compression Cartridge with S/S components
• E-Z Mount wall bracket
• In-Line check valves prevents cross-flow and backflow siphoning
Stainless Steel Deck Mount
Pre-Rinse Assembly
Model
Stainless Steel Wall Mount
Pre-Rinse Assembly
Add-On Spout
KSS50-1000-BR
–––
(Shown)
Model
Add-On Spout
KSS53-1000-BR
Swivel Swing Spout
Stainless Steel Bridge Deck Mount
Pre-Rinse Assembly
–––
(Shown)
Swivel Swing Spout
Model
Add-On Spout
KSS60-1000-BR
–––
(Shown)
Swivel Swing Spout
KSS50-1000AF1
6” (152mm)
KSS53-1000AF1
6” (152mm)
KSS60-1000AF1
6” (152mm)
KSS50-1000AF4
12” (305mm)
KSS53-1000AF4
12” (305mm)
KSS60-1000AF4
12” (305mm)
Stainless Steel Add-On Faucet Body Only
Stainless Steel Add-On Faucet Body Only
Model
Model
KN55-Y001-SS
Spout Size
KSS55-7006
6” (152mm)
KSS55-7012
12” (305mm)
1-1/8” (29mm) hole for deck & backsplash is recommended to accommodate 1/2” supply nipples & 1-1/4” (32mm) hole for double pantry
Tel. 1.800.526.3694
Fax 1.732.364.8110
www.encoreplumbing.com
107
Download PDF