Testometric
TM
Range kN
2.5
Accuracy
+/- 0.5 % of reading down to 1/1000th of
load cell capacity.
Vertical space mm
Crosshead travel / resolution mm
Throat mm
Frame stiffness kN/mm
Speed range mm/min
Speed accuracy
Crosshead guidance
Max force at full speed kN
Max speed at full load mm/min
1170
1000 by 0.001
200 Ø
5
0.001 to 1000
+/- 0.1 % under stable conditions.
Linear slides integral within column
2.5
1000
M250-2.5 AT
Data sampling rate
Overall dimensions W x D x H
Weight kg
Electrical supply
Operating temp degree C
Operating humidity
Machine Configuration
Maximum 12kHz with up to 200Hz data frames.
590 x 450 x 1475
92
Dual input selectable 115 or 230V
1ph 50/60Hz.
-10 to +40
+10 to +90% non-condensing
Table top, base cabinet available
Number of Columns
1
Available load cells
5N, 10N, 20N, 100N, 250N, 500N, 1kN, 2.5kN Maximum
of four load cells up to capacity of machine.
Spigot Ø mm
20
Power kW
0.3
Testometric
TM
M250-2.5 AT
Machine Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Integral PC system running full universal windows software with industry standard and customer specific test
methods pre-installed.
Touch screen display with active tester control panel and readout screen showing real time test curves calculated
results and statistics. Height adjustable and fully articulated.
Optional full colour printer system mounted on universal position swivel arm.
Fully digital testing system with high precision control and accuracy, includes automated computer control of test
methods giving simplicity of operation.
High resolution auto ranging load cells with accuracies better than +/-0.5% down to 1/1000th of the load cell
capacity.
Automatic recognition and calibration of load cells and extensometers, with instant calibration check facility.
800% overload capability of load cells without damage.
Small footprint design, giving economy of bench and floor space.
High efficiency pre-loaded self cleaning ballscrews for fast, quiet testing. Fitted with sealed for life lubricated end
bearings.
Crosshead guidance system providing precise alignment and smooth running.
Precision crosshead control via digital AC servo drive and brushless servo motor giving maintenance free
operation and 4,000,000 steps per revolution positional control.
High speed data collection systems for up to 4 synchronous channels.
6 I/O channels for additional devices such as extensometers, micrometers, callipers, balances etc.
High stiffness loading frames with solid specialised steel crossheads and rigid extruded support columns with
T-slots for accessory mounting.
Overload, overtravel and impact protection.
Telescopic covers giving additional protection for ballscrews against dust and testing debris.
Extensive range of grips and fixtures for tension, compression, flexural, shear, peel and product testing etc.
A wide range of contacting and non-contacting extensometers is available including laser and video models.
Force Measurement
Universally Calibrated, better than Grade 0.5 EN 7500-1, DIN 51221 ASTM E-4. AFNOR A03-501. Range 0.4% to
100% minimum. Automatic identification of load cell. Resolution 1 part in 500000 with autoranging. Electronic load
cell protection.
Extension Measurement
Full frame length to 0.001mm. Resolution 0.001 min. Accuracy 0.01mm. Absolute, relative and auxiliary modes mm,
inch and percent. Programmable extension limits.
Speed Control
Drive system temperature and current protection. Positional jog speed 0.001mm/min to maximum. Speed setting
increments 0.001mm/min.
Load Frame
Rigid frame, using dual slide crosshead guidance system and rigid extruded support column. Frame stiffness 5kN/
mm plus K factor facility built-in. Re-circulating ball screw with bellows. Electronic limit trips, total travel trips and
customer programmable safety stops. Rubber mat front protection.
Software
Comprehensive winTest™ Analysis universal windows software covering tensile, compression, peel, shear,
tear, cyclic, creep and multi stage testing. It includes a wide range of industry standard test methods and facility
to create and store an unlimited number of further test methods. There is automated storage of all test data and
ease of export to other software packages such as word, excel, access and SPC systems for enhanced report
generation. winTest™ Reports is an enhancement to winTest Analysis to add flexibility to data analysis and
statistical reporting. The package provides a report generation capability that can include long-term statistics and
control charts for all specified calculations. winTest Reports™ can also be configured to display headings, titles,
company logos, graphs, charts, pop-up menus and specific technical information.
Options
In addition to standard fixtures we can test your specimens in our applications laboratory and design special
grips and fixtures for custom applications. Models are available with extended frames and wider throat.
CE Marking
Conforms to all relevant European standards with UKAS certification.
Environmental
Energy efficient, lead-free and fully RoHS compliant.
Unit 1 Lincoln Business Park Lincoln Close,
Rochdale, Lancashire, England OL11 1NR
Tel: (44) (0)1706 654039 Fax: (44) (0)1706 646089
Email: info@testometric.co.uk website: www.testometric.co.uk
Download PDF