Easy cleaning. Easy cleaning.

3M Automotive Aftermarket Division
3M Accuspray System
™
™
Less
overspray.
Easy
Easycleaning.
cleaning.

Lower primer consumption

Reduce clean-up time

Reduce solvent consumption
“3M’s innovative, replaceable atomising head gives
like-new HVLP spray gun performance on demand”
YOU AND 3M – EXPERTS EVERY STEP OF THE WAY
3M Revolutionises Primer Application
This innovative product gives like-new spray gun performance
on demand. The innovative technology gives efficient and
economical application of material with each atomising head
delivering a large usable pattern, with very low overspray and
exceptional atomisation.
1
2
3
Hand tighten or use two spanners to connect
the air regulator gauge.
Attach an atomising head to the gun - pull
trigger back and hold, making sure the
release buttons are aligned with latch
openings - listen for a double click to
ensure that it is fully engaged.
Attach 3M PPS Paint Preparation System
cup filled with primer and attach compressed
air hose.
7
8
9
Flush out atomising head with cleaning
solvent until the atomising head is clear of
primer. Do not place in gun washer. Clean
gun body with solvent cloth.
Remove atomising head - be sure to pull
trigger back and pull the atomising head
straight out from the gun body to avoid
bending the fluid needle.
When you have finished using the
system, remove the air line and 3M PPS
Paint Preparation System Cup.
™
™
™
™
Technical Data
Weight
323g (11.4 oz)
Nozzle Size
1.8 mm
Operating Pressure (Full Trigger)
1.4 bar (20 psi) max
Operating Pressure (First Stage)
2.1 bar (30 psi) max
Air Consumption
285 L/min (10 cfm)
4
5
6
Set air pressure at 2.1 bar (30 psi) for 1st
stage (only air flowing).
Set air pressure at 1.4 bar (20 psi) for 2nd
stage (air and fluid flowing).
Adjust fan and fluid flow to achieve the
desired size and wetness of the pattern.
NOTE: when closing the fan adjustment completely it
may be necessary to re-adjust the air regulator gauge.
10
11
12
Wipe off any additional residue from the fluid
needle.
Inspect atomising head for damage or wear
which could result in fluid leaks or poor
performance.
Unless damaged, reattach atomising head
for reuse.
Great Value
Speed &
Performance
€
Reduces overspray
Improves transfer efficiency
Lowers primer consumption
Flatter smoother finish
Decreases sanding time
Reduces solvent consumption
Reduces clean up time
Creates like-new
gun performance
Part No.
Description
Items Unit
Units/Case
16570
3M Accuspray Spray Gun Model HG09 (1 HVLP Primer Gun & 3 atomising heads)
1
1
16610
3M Accuspray Atomising Head Dispenser and 2 Refill Kits (2 Kits = 8 atomising heads)
1
1
16611
3M Accuspray Atomising Head Refill Kits (6 Kits = 24 atomising heads)
4
6
16571
3M Accuspray Fluid Needle
1
1
16574
3M Accuspray Air Regulator Gauge
1
1
™
™
™
™
™
™
™
™
™
™
www.3mbodyshop.co.uk
3
Automotive Aftermarket Division
3M United Kingdom plc
3M Centre,
Cain Road, Bracknell,
Berkshire RG12 8HT
Tel: 0161 237 6391
Fax: 0161 237 5911
3M Ireland Limited
The Iveagh Building
The Park
Carrickmines, Dublin 18
Tel: 01 280 3555
Fax: 01 280 3509
ADD AB013
Please recycle. Printed in UK.
© 3M 2010. All rights reserved.
3M and Accuspray are trademark of the 3M Company