Safety Instruction
Installation
To get a better view, please use this projector in a semi dark room.
Please use this projector carefully, dropping it may cause damaged parts or result in
a blurred image or abnormal displaying.
Power
Be careful while using the power cord, avoid excessive bending. Damaging the power cable
may cause electric shock and fire.
It is better to unplug the power cord after powering off.
Cleaning
Unplug the power cable first.
Clean the shell regularly with a damp cloth, neutral detergent can be used.
Please use a glasses cloth or lens paper, not to scratch the lens.
Please clean projector’s vents and speakers regularly by banister brush, or the vents will be blocked.
High temperature attention
When projection is finished, the exhaust port will be very hot, may cause burning.
While projecting, please do not look the lens directly or it may hurt your eyes.
Warning tips
Do not disassemble the projector, which may cause electric shock and void the warranty.
Please do not put any liquids or weight on the projector.
To assure the stability of heat exhaust, please open the height bracket in the bottom before starting.
Instrucation Manual
1.Projector Overview (1)
1
3
2
1.Projection lens
2.Front IR remote
control sensor
3.Ventilation holes
4.Power on/off
5.U disk/mouse port
6.TF card reader
1
8
4
5
9
1
10
7
6
11
1
12
Warning Tip: computer/video port need to match the especial cable
with the projector( More details please inquiry the distributor) .
8.Adapter connection port
9.U disk/mouse port
10.HDMI input port
11.Computer/video port
12.Switch
3.Remote Control
4.Powering On/Off
1.ON: Plug the DC terminal of power adaptor to DC-IN terminal of projector, adjust the master switch
on the right to “ON”, while the red indicator light , press the power key.
1
7
2
8
3
9
10
4
5
11
6
12
1.Power
2.Arrow keys
3.Menu
4.Volume
5.Vol6.Homepage
7.Mute
8.Enter
9.3D conversion
10.Aspect
11.Vol+
12.Exit
2.OFF: Press the power key while the projector is working normally, if the indicator light turn from green
to red, the projector is off.
Switch off
Switch on
6.How to use the USB2.0/3.0 interface ?
5.How to Focus?
USB2.0/3.0 interfaces could be connected with mouse/keyboard; it could read the video,
audio,picture, office document;it also could be installed APK applications.
Adjust the focus button up or down lightly until the images clear.
Support Format
Picture Format
Adjust the focus button up or down lightly
until the images clear.
150 inch
120 inch
100 inch
80 inch
60 inch
JPG/JPEG/GIF/BMP/PNG etc
Audio Format
MP3/WMA/MP2/OGG/AAC/M4A/DTS etc
Video Format
MP4/AVI/MOV/FLV/VOB/3GP/MPG/RMVB/WMV etc
connect mouse/keyboard/U disk
7.How to connect WiFi?
8.How to connect Bluetooth?
WiFi connection steps:
Please press the main interface on the remote control, the main screen appears,
Please press the “Setting”, find the “Wifi Setting” and select the “Wireless” which
you want to link in the list (like the picture as follow). The virtual keyboard will be
showed on the bottom of the screen after press “OK” key, type password, then
click to link it.
For the first time to connect the Bluetooth devices, (such as Bluetooth Speaker/ Headset),you need to
match with projector
Steps: 1.Please select the “ blutooth device” what you want;
2.Press the main interface on the remote control, the main screen appears,click the “Setting”,
find the “Bluetooth” and select “Bluetooth” and open;
3. Select the “Bluetooth device” which you want to link in the list, click the device and then connect
it is ok.
9. Surfing the Net
Please press the main interface on the remote control, the main screen appears ,
and press “Home”, find the “ Browser”. The default website is Google, if you want
to go to other website, please enter the correct website what you want.
(like www.yahoo.com.)
10.File Management
Please press the main interface on the remote control, the main screen appears ,
and press “Multi- Media” find the “ES explorer”, and select the “sda1” in “Local”;
Click the file you need in the right list, press the left button in mouse mode, then
you can choose “copy”, “paste”, “delete” etc.
13. Wireless Display for Android
1. Please press the main interface on the remote control, the main screen appears,
and press the “Multi-Media”, find the “Miracast”.
2. Android mobile phone and projectors need to be in the same Wifi.
3. Open the taskbar to find “multi screen interactive”,(use the phone Android 4.4
or above version), please auto searching the “MCast-8e6a”, and click it.
Tip: Due to mobile Android updating the advanced version in the future, maybe
will not work well with projector on wireless display function.
ID:MCast_8e6a
14.Wireless Display for ios
1. Please press the main interface on the remote control, the main screen appears,
and press the” Multi-Media”, find the “ Happycast”;
2.Projector and iphone need to be in the same Wifi;
3. From down to up open the interface in the iphone.
a. select Airplay;
b. select device link(such as: Cast V8 and switch on Mirroring button).
Tip: Due to mobile ios updating the advanced version in the future, maybe
will not work well with projector on wireless display function.
16.How to Charge
15.3D Function
1. 3D video play:
1. To charge when projector is off: when the projector is connected with the power adapter, put
When playing video, the video sources for the 3D format, it will recognize the 3D
format automatically and change 3D mode; if not successful, please press “3D”on
the remote control , the main screen appears, then select “ 3D conversion” for
“up-down” or “left-right” format.
2. 3D format to be translated in 2D video play:
When playing the video, the video sources for the 3D format, please press “3D”
on the remote control, then the main screen appears, “Close” the “3D conversion”
and set "3D-2D" to 3D video format and the operation process has been completed.
the switch in the “OFF” position, it means it is charging.
2. To charge when projector is off: when the projector is connected with the power adapter, put
the switch in the “ON” position, and press the switch, the charging icon" " will be displayed
on the upper right of the main interface, it means it is charging.
Tips: 1. Please сharge the battery with the original power adapter;
2. The product only be suitable for a non high temperature environment;
3. When it is charging, do not block the battery cooling holes;
4. Please don't stab or crash the battery when it is charging;
5. Do not get the battery wet.
Self Detect
3D Coversion
3D-2D
LR View Switch
off
Auto
None
Off
11.Local Play
Put the U disk with audio, video and text into the USB2.0 or USB3.0 interface,
press the main interface on the remote control, the main screen appears, and
choose and play press the “ Multi-Media,” find the “ Local disk device,” and
select the “sda1", the file what you want.
Tips: Please try to use the office software when you found the file cannot
be opened.
12.APK Install Instructions
Please press the main interface on the remote control, the main screen appears,
and press the “Apps Center ”, find the “ APP Store”, and select the “Play Store”,
download and install the software.
2. Specifications
1.Projector Overview (2)
1
2
Optical
parameters
1.Height bracket
2.Air intake hole
3.Stend hole(M5)
4.Battery ventilation
holes
5.Ventilation holes
6.Focus knob
1
3
Projection
parameters
4
Warning Tips: It’s strictly prohibited to block the air intake window,
this may cause over heating and damage the projector.
Lens: High light transmittance coating glasses
Brightness:3000 lumens(international standard 500 Ansi Lumens)
Contrast ratio:1000:1
NTSC: ≥120%
Resolution:1280*800
3D display: Yes
Projection size:20-200 inch
Throw ratio: 1.47:1
Offset:100%
Keystone: Electronical adjusting 50
Focus mode: manual focus
Battery: Li-ion style
Battery time:about 120 minutes
Battery capacity: 10,000 mAh
Power adapter:DC19V/3.42A
5
6
Display chip: 0.3'' DMD RGB-LED
Brightness uniformity:98%
System
parameters
Physical
interface
Battery: Low battery warning; overcharge warning
Power:32W
Speaker:2W*2
Size: 175*145*31mm
N.W.:600g
CPU: Mstar-6A628VX quad core1.5GHZ
GPU:Mali-450MP2
RAM:1GB DDR3
ROM: 8GB eMMC
Operation system: based on Android 4.4
WiFi: 802.11ac WiFi, 2.4G/5G
Bluetooth: support bluetooth 4.0
IR: IR remote control
TF: 32GB(Max)
Smart phone pusher: Airplay, Miracast etc.
DC power jack x 1
USB 2.0 x 1
USB 3.0 x 1
HDMI x 1
TF card reader x1
VGA/AV x 1
3.5mm earphone jack x 1