EEZI-TEST
Battery Load Tester
Operating Instructions
Connect charged battery to input wires of battery load tester. (Observe
polarity)
Press and hold, “Load button” on the tester, (for no longer than 3 secs)
Should the measured voltage remain constant above 12VDC
- Battery Condition = Good. (GREEN Light Indication)
Should the measured voltage drop rapidly below 10.6VDC
- Battery Condition = Not maintaining current. (RED Light Indication)
EEZI-TEST
Battery Load Tester
Operating Instructions
Connect charged battery to input wires of battery load tester. (Observe
polarity)
Press and hold, “Load button” on the tester, (for no longer than 3 secs)
Should the measured voltage remain constant above 12VDC
- Battery Condition = Good. (GREEN Light Indication)
Should the measured voltage drop rapidly below 10.6VDC
- Battery Condition = Not maintaining current. (RED Light Indication)