PureSteel™ XI Reprocessing Sink

PureSteel™
XI Reprocessing Sink
APPLICATION
PureSteel™ Healthcare Reprocessing Sinks are intended for use in the
reprocessing and disinfection of surgical equipment and devices post
operation including but not limited to flushing, soaking, leak testing, manual
cleaning, and rinsing.
DESCRIPTION
PureSteel™ Healthcare Reprocessing Sinks are stainless steel sinks built
for reprocessing departments that include an optional selection of
accessories and features. PureSteel™ Sinks are height-adjustable with an
electronic push button that adjust the sink basins and optional, attached
pegboard. PureSteel™ Sinks also feature an open configuration storage
shelf. Slanted surfaces prevent dust build-up. For additional ergonomics,
slanted wrist edges can be included that remove pain on joints and wrists
during long hour of pre-cleaning.
The XI Reprocessing Sink comes with an accessory package for optimal
reprocessing that includes 3 FlexiPump™ Independent Flushing Systems, a
custom fit silicone sink liner, a stainless steel back wall, 32oz. bottle holder
and a 2 gallon rinse and solution tank. Each sink features volume etchings
and ergonomic wrist rests to remove pinch points.
The Selections Checked Below Apply to This Equipment
XI SINK
Standalone (no accessory package);
QTY
Accessory Package; QTY
HEIGHT ADJUSTMENT
Height-adjustable sink
Fixed sink
BASE WITH SHELF
Casters
Pedestal Feet
Facility
SEISMIC COMPATIBILITY
Yes
No
PEGBOARD CONFIGURATION
None
Standard size (size of sink x 11");
QTY
Pegs standard throughout
Special peg design
Custom size; QTY & dimensions
Pegs standard throughout
Special peg design
Contact Name
Contact E-mail
Facility Address
Representative Name
Date
Representative E-mail
Purchase Time Frame
Reason for new sinks
Accessory punches (please note
placement on photo below)
1/2"
5/8"
3/4"
1"
Other
CUSTOM ACCESSORY PACKAGE
FlexiPump Independent Flushing
System; QTY
Back wall installation
Sink wall Installation
PureStation™ Sink Inserts; QTY
16 x 26
Flushing
16 x 16
Flushing
PureStation™ Dedicated Eye Sinks;
QTY
16 x 26
Flushing
16 x 16
Flushing
32 oz. Bottle Holder
1 bottle holder; QTY
2 bottle holder; QTY
3 bottle holder; QTY
Gallon Bottle Holder
1 bottle holder: QTY
2 bottle holder: QTY
Digital Thermometer; QTY
Solution Container and Devices Kit;
QTY
PureComfort™ Anti-Fatigue Mat;
QTY
3” x 5”
3” x 8”
Custom size
GelPro™ Eco-Pro; QTY
20” x 32
20” x 48”
20” x 72”
24” x 36”
36” x 60”
Custom size
GelPro™ OR Anti-Fatigue Mat; QTY
Colombia Blue
18”x 24”
20”x 32”
20”x 48”
DND Red
18”x 24”
20”x 32”
20”x 48”
NOTES & REQUIREMENTS
Power: 15A, 120V, or 60H required. All units are equipped with a Sentrex® High Performance Plug-In outlet center. All Plug-In outlet center units and Surge
Suppressors feature electrical and mechanical grounding and resettable circuit breaker for overload protection. 1 outlet required for power and must be within
12’ from the back.
Plumbing: Braded hoses are used and must have 13” of latitude to allow the sink to articulate up and down. One hose is required for both hot and cold water
sources. See faucet installation requirements and check local plumbing codes for more information.
Drain: Drain must be located as close to the floor as possible to ensure optimal drain performance. Typically, flexible hosing or telescoping PVC is used. Check
local plumbing codes for more information. Please note the facility is responsible for all final plumbing connections.
Weight and Size: The weight capacity sits at 540 pounds. The external sink dimensions are 34" x 30"x 37" with an 11" height adjustable range. Internal bay
dimensions are 30" x 18" x 8".
Download PDF
Similar pages
Franke 0392148
Franke 0392146
Franke 0392134