The BRITA PURITY family

The BRITA PURITY family
One technology. A wide range of solutions.
Optimal water quality •
Highest level of product safety •
Simple handling •
We make the water.
BILD
2
Flexible, efficient, cost-effective: PURITY.
Optimum water quality.
Highest level of product safety.
Simple handling.
Your advantages:
Your advantages:
•
•
•
•
•
•
Consistent water quality over the
entire life of the filter
Safe machine protection
Free from undesired odour and
flavours
Improved quality of drinks and
dishes and optimal cleaning
results
Satisfied customers who come
back
Significant reduction of service
costs
Our service to you:
•
•
•
Your advantages:
•
•
•
•
Safe handling
High level of operating security
Convenient and precise operating
data recognition
Enabled for telemetry
•
•
•
Our service to you:
•
•
•
•
•
•
Visual safety symbols
Audible lock engagement
Stable metal pressure vessel,
bursting pressure tested
Certified safety through
independent institutions
Leading Advanced Control System
technology (ACS technology)
Unique flow system
IntelliBypass Technology
Perfect, inter-coordinated filter
media and components
•
Quick, tool-free filter
replacement
No need to switch off water
during maintenance
Simple pre-rinsing and
bleeding
Vertical and horizontal
operation possible
High level of stability with no
additional fixing
Our service to you:
•
•
•
•
Quick-Lock System
Optional: integrated stop valve
on the inlet side
Flush and stop valve
integrated on the outlet as
standard
Tightly packed filter bed
The three PURITY promises.
3
We keep our promises.
This technology makes it possible.
For water quality fulfilling even the highest
requirements.
And it goes without saying that the electronic components
are CE-certified. That is safety for you – signed and sealed!
Unique flow system
The even flow helps prevent undefined mixed water build up
and guarantees constant reduction of the carbonate hardness. The distributed, flat crude water flow forms parallel,
equal length and ideal flow paths which enable the filter
medium to be utilised fully and evenly from top to bottom.
(ACS technology)
Innovative measuring and display units with precise data
measurement and digital display for convenient and precise
operating data recognition, flexible accessories such as the
remote display, and telemetry capability.
IntelliBypass A volumetric-flow independent by-pass water proportion ensures constant water quality, particularly
for low flow rates (for small-volume drinks e.g. espresso).
For users who appreciate simple and
convenient operation.
Quick-Lock
A touch of a button and a twist is all it takes to open the
filter.
Everything‘s perfect – the combination and interplay of the
filter media and components necessary for the relevant
application.
BRITA hose sets can be used without switching off the
mains water supply.
For filters, which guarantee the highest
possible safety.
Commissioning and all maintenance work can be carried
out directly on the filter without the use of tools, saving
time and costs.
Clear, easy-to-understand symbols on the filters which
support safe handling during installation, maintenance
and filter exchange.
Clearly audible sound to signify that the head has engaged
securely with the pressure vessel – there is no doubt that
the filter system is locked securely.
The use of stable and robust material guarantees a long
service life of the filter (10 years) – all containers are
subjected to static and dynamic stability tests.
The food quality afforded by BRITA water filter products is
tested and monitored by independent institutions.
The PURITY systems bear the test symbols TÜV, SVGW,
WRAS, VA, and other national quality marks.
4
Depending on the space available, the compact filter bed
enables the filter to be operated horizontally with the same
capacity and consistent high water quality.
From coffee machine to dishwasher –
areas of application.
Coffee
The demands are high: optimum aroma and taste, stable
crema, even distribution of flavour enhancers, such as
milk, cream, etc. – an experience for all the senses. BRITA
water filters enable optimal water quality for successful
presentation.
Vending
Give your customers speciality coffee, tea, soup and
cold drinks with that extra taste and save on the majority
of service trips. With BRITA water filter systems in your
machines, you can be reassured that your machines are
safe from scale and you can save both time and money.
Combi ovens & conventional ovens
Don‘t just cook and steam with water – use BRITA water
and create dishes to treat the eyes and palate. Wonderfully light and fluffy baked goods, tasty crusts and crispy
vegetables which just beg to be eaten. Your machines
are operated so gently that they remain in good working
order for a long time with no additional maintenance
required.
Dishwashers
A major factor for hygienically clean and shining dishes
is the quality of the water used to clean them. BRITA
filters give any water – irrespective of the regional origin
and contents – the same precise, reliable properties.
Use BRITA filters for the best possible quality and for
shining results.
5
PURITY. Or as the experts call it:
a new generation in water filtration.
The PURITY concept.
The PURITY concept is based on a
simple idea: A specific filter from the
PURITY family tailored to offer a solution for every problem within the commercial food and beverages sector.
The building-block system.
BRITA has developed a building-block
system which enables a rapid solution to problems based on the pressure vessel replacement cartridge
principle – open pressure vessel, insert problem solution, close pressure
vessel – one of a kind!
PURITY makes every water related
issue a thing of the past.
Your advantages:
•
•
6
One technology:
Installation, handling and filter replacement always follow the
same principle.
Reduces cost and promotes business:
High utilisation of the filter medium with the highest filter
quality and low maintenance requirements on machines.
•
Simple filter replacement:
The Quick-Lock principle enables simple filter replacement
directly on the filter without the use of tools.
•
Flexibility from one system:
the ideal individual filtration solution for all your requirements.
One technology. A wide range of solutions.
A filter solution for every application and every water problem.
NE W
y
er capacit
4 4% high
e
nc
performa
iter
> 5.000 L
PURITY Quell ST
PURITY 1200 Clean
PURITY 1200 Clean Extra
Decarbonisation
Sizes: 450, 600, 1200
Partial demineralisation
Sizes: 1200
Total demineralisation
Sizes: 1200
PURITY Steam
PURITY Quell GY
Partial demineralisation
Sizes: 450, 600, 1200
Prevention of gypsum deposits
Sizes: 600, 1200
* Advanced Control System
We are constantly developing.
Look forward to new solutions.
7
an d
Decarbonisation
All-round protection for your machine and products:
PURITY Quell ST
The PURITY Quell ST with 3 different filter sizes ensures reliable removal of limescale-forming substances, as well as undesired odour and flavours, offering optimal
product quality and long machine running times.
PURITY Quell ST
The ideal solution to fulfill even the highest quality requirements for guests
and machines.
PURITY Quell ST
Filtration takes place in four stages:
1 Pre-filtration
A pre-filtration fabric at the entrance to
the filter collects coarse particles such
as sand and ensures optimal utilisation
of the downstream filter media with
even flow streams.
2 Carbonate hardness reduction
The PURITY Quell ST filter medium
specifically reduces carbonate hardness. This helps to prevent unwanted
limescale build-up.
1
2
3 Activated carbon filtration
All the water – including water that is
directed via the by-pass setting – runs
through a BRITA activated carbon filter.
Unpleasant odours and tastes are
eliminated.
4 Fine filtration
At the end of the filtration process,
a fine filter retains particles as small
as 10 µm.
3
4
8
The task:
The solution:
Limesale and undesired odours and
flavours can develop very quickly
in hot water applications. This is
especially so when using raw water
with high carbonate hardness. The
result is high service costs, reduced
product quality, and often unsatisfied
guests.
PURITY Quell ST filters, with their
individual filter media designed to
specifically combat this problem,
ensure long-term protection for
machines against limescale build up
and guarantee high quality products
which will have your customers
coming back time and time again.
Partial demineralisation
Washing dishes can really be this good!
PURITY 1200 Clean
The PURITY 1200 Clean with individual filter media removes limescale-building ions
from crude water. The result: partially demineralised water of the highest quality.
PURITY Clean
The ideal solution for professional washing of cutlery, glasses and white dishes for
raw water with a high carbonate hardness and unproblematic additional mineral
content.
PURITY 1200 Clean
Filtration takes place in three stages:
Pre-filtration
A pre-filtration fabric at the entrance to
the filter collects coarse particles such
as sand and ensures optimal utilisation
of the downstream filter media with
even flow streams.
1
2 Carbonate hardness reduction
The improved PURITY Clean filter medium specifically reduces carbonate hardness. This helps to
prevent unwanted limescale build-up.
1
3 Fine filtration
At the end of the filtration process,
a fine filter retains particles as small
as 10 µm.
2
3
The task:
The solution:
High carbonate hardness levels in raw
water causes limescale to build up
very rapidly on vital dishwasher parts.
This results in higher service costs
and, above all, unhappy guests, as the
quality of the dishes no longer meets
expectations.
The PURITY 1200 Clean partial
demineralisation filter has a filter
medium that is specially designed
to offer long-term protection against
limescale build-up in your machine
and on your dishes. Cost-intensive
servicing or machine breakdown
times are a thing of the past with
PURITY 1200 Clean. What‘s more,
the hot water suitability of the filter
system (up to 60°C) also reduces
energy costs.
9
Total demineralisation
Gleaming crockery – beaming guests!
PURITY 1200 Clean Extra
NE W
ya
er capacit
4 4% high
nce
performa
nd
iter
> 5.000 L
The PURITY 1200 Clean Extra with individual inter-connected filter media ensures
targeted removal of ions responsible for building limescale, smears and marks. The
result: Fully demineralised water of the highest quality.
Y Clean Extra
PURIT
The ideal solution for professional washing of high quality cutlery, sophisticated
glasses and fine dishes for raw water with a high carbonate hardness and high
additional mineral content.
Benefit from the improved capacity of the new PURITY Clean Extra.
PURITY 1200 Clean Extra
Filtration takes place in five stages:
1 Pre-filtration
A prefiltration fabric at the entrance to
the filter collects coarse particles such
as sand and ensures optimal utilization
of the downstream filter media with
even flow streams.
2 Carbonate hardness reduction
The improved filter medium specifically reduces carbonate hardness.
Eliminating certain ions from the water
prevents unwanted limescale build-up.
1
3
Permanent hardness reduction
This level eliminates permanent hardness and non-hardness-forming ions
(cations).
2
4 Anion reduction
This filter medium eliminates the remaining ions (= anions).
3
5 Fine filtration
At the end of the filtration process is a
fine filter which retains particles of up
to 10 µm.
4
5
10
The task:
The solution:
High carbonate hardness levels in raw
water cause limescale to build up very
rapidly on vital machine parts when
higher rinse temperatures are used.
Depending on the concentration of
other minerals in the crude water, the
washing cycle often leaves glasses
and cutlery in particular covered in
smears and marks, which need to be
laboriously polished away by hand.
This polishing often results in costly
glass breakages.
The PURITY 1200 Clean Extra total
demineralisation filter with its unique
and innovative filter medium composition offers optimum quality for
cutlery, glasses and crockery. The
presence of limescale, smears, marks
and glass breakages after washing is
a thing of the past, as are expensive
refill activities for regenerating conventional water treatment systems.
What‘s more, the hot water suitability
of the filter system (up to 60°C) also
reduces energy costs.
Partial demineralisation
Optimal conditions for steaming and baking!
PURITY Steam
The PURITY Steam with individual filter media removes limescale-building ions from
raw water. The result: partially demineralised water of the highest quality.
PURITY Steam
The ideal solution for creating unique dishes in an impeccably functioning device,
which remains protected from limescale and provides the highest performance over
a long period of time.
Profit now from the astounding capacity of PURITY Steam!
PURITY Steam
Filtration takes place in three stages:
1 Pre-filtration
A pre-filtration fabric at the entrance
to the filter collects coarse particles
such as sand and provides the unique
PURITY flow concept, which ensures
even use of the full capacity – regardless of water flow rates and pressure
impacts.
1
Carbonate hardness reduction
2
2
3 Fine filtration
At the end of the filtration process is a
fine filter which retains particles of up
to 10 µm.
3
The task:
The solution:
Sensitive devices with ultra-fine
nozzles, through which the steam,
essential for ensuring perfection is
directed, require particular attention.
Even the smallest blockage of the fine
pipes reduces the quality of the end
product during baking and cooking and
must be removed, as it costs time and
money. Deposits in the cooking space
have a negative effect on the cooking
result and require additional cleaning.
The PURITY Steam was developed
especially for the sensitive devices
in the steamer and enables long-term
and reliable high quality performance
while protecting the machine.
11
Prevention of gypsum deposits
Gypsum deposits are a thing of the past!
PURITY Quell GY
PURITY
Quell GY
The PURITY Quell GY was specially developed to provide a professional solution for
hot water applications (coffee/espresso and vending) affected with water containing
gypsum deposits. The innovative filter media offers targeted removal of gypsum-forming substances from the water.
The result: high-quality water offering the user all the well known BRITA advantages –
long machine life and optimal product quality.
The ideal solution for all applications, for which being free from limescale is not
sufficient to fulfill the highest quality expectations.
PURITY Quell GY
Filtration takes place in five stages:
1 Pre-filtration
A pre-filtration fabric at the entrance to
the filter collects coarse particles such
as sand and ensures optimal utilisation
of the downstream filter media with
even flow streams.
Reduction of gypsum-building
ions
The PURITY Quell GY filter medium
offers targeted removal of both carbonate hardness and gypsum-building
ions from water. This helps to prevent
unwanted gypsum build-up.
2
1
2
3
4
3 Reduction of carbonate hardness
The improved PURITY filter
medium specifically reduces carbonate hardness. This helps to
prevent unwanted limescale build-up.
4 Activated carbon filtration
All the water – including water that is
directed via the by-pass setting – runs
through a BRITA activated carbon filter.
Unpleasant odours and tastes are
eliminated.
5 Fine filtration
At the end of the filtration process,
a fine filter retains particles as small
as 10 µm.
5
12
The task:
The solution:
Among the many different types of
drinking water found in the various
regions, it is possible to come across
particularly problematic water. Water
which tends to cause gypsum formation
in machines in the hot-drinks sector,
which have the same negative effects
as limescale and results in additional
cost for the user. Crucial machine
components become impaired by
gypsum build-up, resulting in machine
down times.
The PURITY Quell GY especially offers
a solution for this type of water and
solves this issue very successfully.
Once the water is measured (test kit
available) and the gypsum content is
confirmed, the solution is child‘s play –
PURITY Quell GY.
Two minutes for your new water filter.
It has never been so easy.
Quicker, easier and hassle free!
PURITY filters are based on the
simple interchangeable cartridge
principle, which makes changing the
cartridge child‘s play. All you need: a
new filter cartridge, the sticker supplied with it, and two spare minutes.
With the integrated water stop valve in
the standard inlet hoses of the PURITY
filter (with outlet hose available as a set),
the filter cartridge is changed in no time at
all – directly on the filter without the use
of tools and in just a few steps. When the
valve is closed, the pressure valve can be
opened easily via the innovative QuickLock principle.
Remove the pressure vessel lid, take out
the used cartridge, insert the new cartridge and replace the lid: done! And it only
takes two minutes.
Then simply flush the new cartridge using
the flushing tap on the pressure vessel lid.
All hoses remain connected. This means
that you don‘t need to go to the hassle of
disconnecting and reconnecting the filter
– saving a great deal of time. Write the
installation date on the sticker, which you
then stick on the outside of the pressure
vessel.
Replacement cartridge
e.g: PURITY 1200
Clean
Enter the installation
date on the sticker
and …
…stick it on the
pressure vessel.
13
Maximum operating comfort
and complete control at all times
The electronic measuring and display unit
Quality monitoring „live“!
Reliable monitoring during operation
ensuring easy and reliable planning for the next
filter change.
Uncomplicated, user-friendly & reliable!
Your individual data is entered just once in one
easy step (local carbonate hardness, device
type and by-pass).
In operating mode: a full overview!
Then simply flush and the system automatically
calculates the capacity of the cartridge used.
All important data can be read conveniently on
the clear display unit:
• Current remaining capacity in litres
• Carbonate hardness setting
• Date of first commissioning
• By-pass water proportion
This means that you always have full control
over the current filter status! The electronic
display guarantees use of the whole filter
capacity!
PURITY water filter systems are
also available without display
electronics for use with appliances
with integrated volume measurement.
Even more operating comfort
and clarity – the remote display
This accessory makes laborious reading
on the filter installation site a thing of
the past – simply assemble the remote
display in a clearly visible position and all
data is available in one place and at eye
level. Telemetry can also be used with the
remote display (remote data query).
14
Get to know your water
Order the BRITA test kit and get to
the route of your water problem!
Contact us
Safer and more efficient with telemetry!
We have upgraded the display electronics of our
PURITY systems and made them compatible with
telemetry*: The display unit sends all relevant
system data to the telemetry module. From there,
the data is sent via GMS/GPRS over a satellite to a
server, and you can easily monitor and analyse your
systems online with special software.
* only in conjunction with the remote display
ISP
Server
INTERNET
You receive:
This means marked advantages for you:
• Up-to-date information on the status
of your filter systems
• Warning notice for pending burnout, fault or timeout
• Tabular list of the systems according to postcode, installation or change date, etc.
• Losses are minimised
• Fault analysis and software updates are online
• Your deployment and personnel planning is optimised
• On request, we can also send you a warning message as a text to your mobile phone (depending on the soft
ware used)
• Using telemetry, you can also monitor and control the coffee machine, e.g. call up consumption data or change recipes.
That is state-of-the-art filter management!
An investment that is worthwhile!
15
Water is not everything, but everything
is nothing without water – two-thirds
of the human body is made up of this
element. Drinking water is the most
important food and the basis for a high
standard of hygiene. Drinking water is
indispensable in the production of many
foods. Unfortunately, the composition of
the tap water in many regions of the UK
and Europe is not optimal.
But there is: BRITA, with over 40 years
of experience in the field of water filtration. BRITA filters optimise the quality
of the water, reduce the carbonate
hardness and any heavy metals resulting
from domestic plumbing, thus ensuring
PN: 1000400-005e
moser kommuniziert. Würzburg Hi 08/11 1.0 bri_07126 GB
untroubled enjoyment.
For more information:
BRITA Professional GmbH & Co. KG
Heinrich-Hertz-Straße 4
D – 65232 Taunusstein
Tel: +49 (0)6128 / 746-0
Fax:+49 (0)6128 / 746-5010
professional@brita.net
www.brita.net
BRITA Professional
BRITA House
9 Granville Way
Bicester
GB – Oxfordshire OX26 4JT
tel: +44 (0)844 742 4990
fax: +44 (0)844 742 4902
clientservices@brita.co.uk
http://professional.brita.co.uk
Download PDF