U.3713X (Cross Handles)

www.rohlhome.com
PERRIN & ROWE® GEORGIAN ERA HIGH NECK WIDESPREAD
LAVATORY FAUCET
Perrin & Rowe® Bath Geogian Era
U.3713X (Cross Handles)
FEATURES
COLORS/FINISHES
WARRANTY
• Brass construction
• Ceramic disc control cartridges
• 1/2” NPSM connections
• 3 x 1 3/8” hole cutout
• 1.2 GPM
• 1 1/2” max. depth deck
• Matching tub filler U.3648 or U.3649
• Polished Chrome
• Polished Nickel
• English Bronze
• Satin Nickel
• Inca Brass
• Limited Lifetime
6 - 15" Max Centers
Ø1 1/8”
1/2” NPT
HOT IN
4"
6"
Ø1 3/8”
hole
Ø2 3/8"
10 1/4"
2 5/8”
1 1/2”
MAX
4 1/2" Centers
Ø2 1/8"
COLD IN
Ø1 1/4"
11" Centers Max
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com
INSTALLATION INSTRUCTIONS
comparable alternative
The Georgian Bathroom Collection
Installation & User Guide
9.250120
9.19653*
3 HOLE WIDESPREADS
6" 9.250120
15"
• U.3712LS-2
• U.3712LSP-2
CE
NT
ER
S
9.17793*
Ø1 1/8"
1/2" NPT
Ø1 3/8"
HOLE
9.26400
1 3/4" MAX
1/2" NPT
Ø 2 3/8"
HOT IN
11
• U.3713X-2
X
MA
ER
T
EN
"C
COLD IN
Ø 1 1/4"
Temp Range:
Min 1°C/34°F
Max 85°C/185°F
UK, using the latest
rds.
n & Rowe product and
r luxury products by us.
Recommended
Working Pressure:
Min 1bar/15psi
Max 5bar/75psi
Ideal performance obtained with equal hot & cold pressures.
9003741U
Issue 5
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com
INSTALLATION INSTRUCTIONS
The Georgian Bathroom Collection
Installation & User Guide
Congratulations on the purchase of your Perrin & Rowe Bathroom Product. Correctly installed and with sensible
care, this product will give you many years of trouble free service.
IMPORTANT INFORMATION
3
Before you proceed... We recommend you engage the services of a registered plumber to install
this product.
For ease of possible future servicing, we also recommend the fitting of conveniently placed
isolating valves.
WO
In addition to the guide below it is essential that the written information overleaf is carefully read
and understood.
Preparation Check Box for Installer
Flush the plumbing system before
installing the bathroom product.
Once unpacked remove large & small base seals,
rosette, hood & lever, securing nut, clamp plate,
pop-up and top waste ready for installation.
Spout
1
4
Base Ring
Large Base
Seal
WORK SURFACE
Clamp Bolt
Clamp Plate
WORK SURFACE
Securing Nuts
Box Spanner
Secure spout with supplied Box Spanner.
Ensure all connections are firmly tightened
Hood & Lever
2
Sidevalve to be installed from underside of work surface as
shown.
Ensure connection for flexible hose is facing towards spout.
Rosette
Small Base
Seal
Vernier
Insert
Washer
Backnut
Valve Body
Leave backnut at the bottom of valve body and place the valve
body up through the work surface hole.
WORK SURFACE
Before screwing down the hood & lever please make sure
orientation of levers is correct. Slide the hood & lever over the
top of valve body just enough to see if it is correctly
orientated.
Correct orientation can be achieved by removing and turning
the vernier insert.
Screw backnut up to the underneath of the work surface.
Flexible Hose
Connect flexible hose as shown.
Clamp
Bracket
Pop-Up
Shaft
Pop-Up
Rod.
Rubbe
BEFORE USE
• Carefully check the ins
• If further building work
the finish.
• Please ensure that the
CARE & MAINTENA
Wipe down after use to a
Occasional cleaning with
plated finish in good con
Do not use proprietary
with ammonia bleach
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com
INSTALLATION INSTRUCTIONS
and with sensible
Hood & Lever
3
Connect flexible hose as shown.
ber to install
Rosette
y placed
Small Base
Seal
WORK SURFACE
Connect HOT & COLD water supplies to the side
valve inlets.
Ensure all connections are firmly tightened.
Washer
Backnut
s carefully read
Valve Body
mall base seals,
ut, clamp plate,
nstallation.
Flexible Hose
4
Pop-Up
Adjusting Sink Waste
O Ring
Top Waste
• Ensure that pop-up shaft is in position alongside pop-up
rod.
• Shaft and rod can be cut if space is restricted.
Foam
Seal
WORK SURFACE
• Adjust position of clamp bracket to achieve maximum
movement of pop-up shaft.
BASIN/BIDET
Clamp
Bracket
ox Spanner.
firmly tightened
Pop-Up
Shaft
Pop-Up
Rod.
Rubber Seal
• Secure pop-up using clamp bracket.
• Place pop-up into waste and adjust movement of
pop-up shaft.
Bottom
Waste
Please Note: Ceramic disc valves are fitted
as standard to this mixer. Flow from FULLY
OFF to FULLY ON is achieved by rotating the
handles a quarter turn.
f work surface as
BEFORE USE
ng towards spout.
y and place the valve
• Carefully check the installation for leaks.
• If further building work is to be carried out in the vicinity, cover the tap with a plastic bag to avoid damaging
the finish.
• Please ensure that the installation complies with local plumbing codes.
ease make sure
ood & lever over the
s correctly
CARE & MAINTENANCE
moving and turning
e work surface.
Wipe down after use to avoid water spotting and mineral build up.
Occasional cleaning with warm soapy water, followed by a polish with a soft cloth is all that is required to keep the
plated finish in good condition.
Do not use proprietary abrasive liquids, powders, or pads to clean the shower. Do not use any products
with ammonia bleach or limescale remover. You will damage the plated finish and void your guarantee.
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com
INSTALLATION INSTRUCTIONS
ROHL WARRANTY POLICY
All products supplied by ROHL carry warranties against manufacturing defects.
Perrin & Rowe products carry a Limited Lifetime Warranty.
ROHL LLC will provide free of charge, as its options, replacement part(s) or product (or a comparable alternative
product) to replace those which have proven defective in materials or workmanship.
For full ROHL LLC WARRANTY please contact ROHL or visit www.rohlhome.com
SPARES
9.24194*
9.26760*
9.250120
Mixer Service Kit
9.53723
9.19653*
3 HOLE WI
9.21198*/HOT
9.21198*/COLD
9.12752*
9.18380*
9.13195
LT
9.13196
RT
9.250120
9.15402
9.28400
9.18380*
9.30195
LT
9.30196
RT
9.17793*
Ø1 1/8"
9.51786*
1/2" NPT
Ø1 3/8"
HOLE
9.26400
9.26709*
9.12752*
9.13196
RTC
9.01797*/HOT
9.01797*/COLD
•U
9.26705
* Where indicated please specify color
Temp Range:
Min 1°C/34°F
Max 85°C/185
SPARE PARTS & SERVICE
Perrin & Rowe products are manufactured in the UK, using the latest
technology and built to the highest quality standards.
3 Parker
Irvine
CA 92618
(714) 557-1933
We would like to thank you for purchasing a Perrin & Rowe product and
take this opportunity to invite you to look at other luxury products by us.
Please contact us to receive our latest catalogue.
Recommende
Working Pres
Min 1bar/15ps
Max 5bar/75ps
Ideal perform
www.rohlhome.com
Perrin & Rowe is a registered trademark.
9003741U
Issue 5
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
Download PDF