BRIVO ONSITE
EMBEDDED ACCESS CONTROL SYSTEM
Brivo Onsite is our embedded access control system for single site applications.
With a total capability to support up to 30 card readers, Brivo Onsite allows you
to start small and add capacity as you grow.
Self-contained system for single site operations
Brivo Onsite is delivered complete and ready to configure via an internet browser. The operating system and Onsite
application are pre-installed on the control panel which also manages connected readers, locks and alarm points.
There is no software to install and no dedicated computer required. Brivo Onsite meets DoD 5220.22-M NISPOM
and Intelligence Community Directive (ICD) 705 for SCIF use.
FEATURES
yySupports up to 30 card readers at one location
yyAdministrative access via Ethernet and/or Wi-Fi
yyEncrypted storage and communications
yySupports Wiegand and OSDP compatible readers
yyNotifications of alarms via email or text
yyAnti-passback
yyReporting tool
yyContext sensitive help
yyOptical Tamper Detection
yyUpgradable for connection to Brivo Onsite Server
ORDERING INFORMATION BRIVO ONSITE
B-Onsite-4 control panel (includes two-board chassis,
main board, power supply board, battery and transformer)
B-Onsite-8 control panel (includes four-board chassis,
main board, power supply board, 2 batteries and transformers)
ORDERING INFORMATION – ASSOCIATED COMPONENTS
B-ACS6000-MBS – Two reader main board for Onsite
B-ACS6000-DB – Two reader expansion board
B-ACS6000-IO – Input/output expansion board
B-ACS6000-EXP – Expansion chassis (2 board capacity with power supply)
B-ACS6008-EXP – Expansion chassis (4 board capacity with power supply)
B-ACS6000-PSB – Power supply board
BRIVO ONSITE SPECIFICATIONS
Brivo Onsite
ACS6000-DB
ACS6000-I/O
Total number of credentials
5000 credentials per main control board.
N/A
N/A
Maximum number
of card readers
Up to 30 (with 14 expansion door boards)
Up to 2 per door board
N/A
Event history
50,000 events (FIFO) offline from host
N/A
N/A
Up to 120 (with 14 expansion boards)
8 inputs per board
8 inputs per board
Input points
8 inputs per board
2 door position points; 2 request to
exit points; 4 auxiliary input points
On board; (2) door position
points; (2) Request to exit points;
(4) Auxiliary input points
Up to 118 (with 14 expansion boards)
8 inputs per board
6 outputs per board
Output relays
Optional 4 state supervision
Form C (SPDT) 350mA @ 12VDC
– (2) lock switching (wet)
2 door position points; 2 request to
exit points; 4 auxiliary input points
8 inputs per board
Optional 4 state supervision
Form C (SPDT) 6A @ 28VDC (4)
Auxiliary output relays (dry only)
Maximum number of
input/output and/or door
board expansion boards
Up to 14 per Brivo Onsite main board
N/A
N/A
Authentication and
encryption
Brivo Onsite uses TLS 1.2+, with AES256
encryption and SHA256 certificate
with a 4096 bit key length
N/A
N/A
Max power consumption
(board only)
12VDC @ 1.5A peak with all relays engaged
12VDC @ 500mA peak with all relays engaged
12VDC @ 90mA idle / 400mA peak
with all relays engaged
Card reader inputs
2 Wiegand or RS-485 OSDP
2 Wiegand
N/A
Brivo Onsite board
dimensions
5”h x 11.5’w
Board communication bus
CAN Bus – Use CAT5 (or higher) UTP cable up to 1,500 feet
Temperature and
humidity range
Operating temp: 32oF to 125oF, (0o to 49oC) Humidity; Max 85% non-condensing
Included components
(2) MOV surge suppressors and (16) 2K ohm End-of-line resistors
Expansion board capacity
Power supply (included)
ACS6000-EXP – Capacity for (2) boards. Additional Chassis enclosures can be chained together
via the CAN Bus to connect one controller board to up to 14 Door/IO boards.
ACS6008-EXP – Capacity for (4) boards. Additional Chassis enclosures can be chained together
via the CAN Bus to connect one controller board to up to 14 Door/IO boards.
12VDC @ 3A (Supports expansion boards and readers only)
Aux output – 12VDC @ 250mA (Not to be used for lock power)
Transformer (included)
19VDC @ 36W
Standby batteries and
cables (included)
Brivo Onsite-4 – (1) 12VDC 7Ah Rechargeable
Enclosure dimensions
Brivo Onsite-8 – (2) 12VDC 7Ah Rechargeable
Brivo Onsite-4 – 17.283”h x 15.63”w x 3.5”d
Brivo Onsite-8 – 27.283”h x 15.63”w x 3.5”d
Brivo Onsite
enclosure details
NEMA type 1, key locks, and knockouts
Host communications
Ethernet and/or WiFI IEEE 802.11 b/g/n
Compliance
Access Control UL294/
|
|
Part 15 Class A Compliant |
Compliant
Call us at 866.692.7486 to learn more about the Brivo Onsite.
Brivo_Onsite_Technical_Collateral_10.20.17
Brivo | 7700 Old Georgetown Road, Suite 300, Bethesda, MD 20814 | 1.866.692.7486 | brivo.com