Autoclaves 1 - Globe Scientific

Pages 2 to 3
Pressure regulator
Vertical stand autoclaves.
Pages 4 to 9
Microprocessor control and atmospheric purge
Water distiller for autoclaves
Horizontal stand autoclave
Pages 9
Page 10
Horizontal stand autoclaves
Pages 11 to 13
Microprocessor control
Microprocessor control and fractional vacuum purge
Polypropylene and polyester bag sealers
Autoclaves for preserved food
®
Pages 14
Pages 15 to 16
Distributed worldwide by Globe Scientific Inc.
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
ELECTRICAL AUTOCLAVES FOR STERILIZATION
Vertical desktop autoclaves
ELECTRICAL AUTOCLAVES FOR STERILIZATION
Wide range of electrically heated bench top and top
loading autoclaves.Pressure range from 0.62 to 2 bar,
Capacity: 1.5, 8, 12, 18, 20, 23, 25, 50, 80 and 150 litres.
Complies with the pressure and autoclave directives
• 50 Years of sterilization experience.
• Quality and innovation.
• A new dimension in design and
technology
PRINCIPAL OF STEAM STERILIZATION:
STERILIZATION IS THE PROCESS OF THE DESTRUCTION AND ELIMINATION OF ALL FORMS OF MICROBIAL LIFE, INCLUDING BACTERIA AND ITS
SUB-FORMS.
THE LABORATORY AUTOCLAVE CONSISTS OF A VESSEL IN WHICH STEAM FLOWS AT A HIGH PRESSURE WITH A STERILIZATION PURPOSE.
SATURATED STEAM WILL IMMEDIATELY CONDENSE AND THUS RELEASING ITS HIGH EVAPORATION HEAT, WHICH IS IN FACT THE DESTRUCTIVE
AGENT. IN ORDER THAT STERILIZATION WOULD BE EFFECTIVE, STEAM MUST BE SATURATED AND, CONSEQUENTLY, ALL THE AIR INSIDE THE VESSEL MUST BE PURGED BEFORE INITIALIZING THE PROCESS.
IN THE FOLLOWING PAGES J.P. SELECTA OFFERS AN EXTENSIVE RANGE OF AUTOCLAVES WITH A CHOICE OF ATMOSPHERIC PURGING OR VACUUM PURGING SYSTEMS. A CHOICE OF MICROPROCESSOR CONTROLLED SYSTEMS ARE OFFERED INCLUDING DRYING CYCLES AT THE END OF
THE STERILIZATION CYCLE.
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
2
Electrical Autoclaves for sterilization
THREE DIFFERENT CONTROL SYSTEMS:
CONTROL BY PRESSURE WITH ATMOSPHERIC PURGE:
MICRO 8 MED 12 MED 20
MICROPROCESSOR CONTROL OF
TEMPERATURE AND STERILIZATION CYCLE,
ATMOSPHERIC AIR PURGE:
MICROPROCESSOR CONTROL OF TEMPERATURE AND STERILIZATION CYCLE,
PULSED VACUUM AIR PURGE:
AUTESTER ST DRY PV-III 25 (mod. horizontal)
AUTESTER ST DRY PV-B 12 (mod. horizontal)
AUTESTER ST DRY PV-B 18 (mod. horizontal)
AUTESTER ST DRY PV-B 23 (mod. horizontal)
AUTESTER P 1,5 (mod. vertical)
PRESOCLAVE III 50 (mod. vertical)
PRESOCLAVE III 80 (mod. vertical)
RS-232 and USB interface output of parameters
to a computer, printer or USB adapter.
SUMMARY TABLE OF MODEL RANGE
MODELS
Part No.
MICRO 8
4001745
MED 12
4001756
MED 20
4001757
PRESOCLAVE Ill 50
4001758
PRESOCLAVE IlI 80
4002136
AUTESTER ST DRY PV-B 12 4001727
AUTESTER ST DRY PV-B 18 4001734
AUTESTER ST DRY PV-B 23 4001735
AUTESTER ST DRY PV-III 25 4002420
AUTESTER ST DRY PV-III 50 4002516
AUTESTER ST DRY PV-III 80 4002517
AUTESTER ST DRY PV-III 1504002518
STERIL-FOOD COM 20
4002421
STERIL-FOOD MAN 80
4002427
STERIL-FOOD COM 80
4002422
STERIL-FOOD MAN 150
4002428
STERIL-FOOD COM 150
4002423
The printer can be built-in the autoclaves together with the control panel:
AUTESTER ST DRY PV-III 50 (mod. vertical)
AUTESTER ST DRY PV-III 80 (mod. vertical)
AUTESTER ST DRY PV-III 150 (mod. vertical)
PRESOCLAVE III 50 (mod. vertical)
PRESOCLAVE III 80 (mod. vertical)
QUICK OVERVIEW
System Capacity
D RY
litres
NO
NO
NO
NO
NO
YES
YES
YES
YES
YES
YES
YES
NO
NO
NO
NO
NO
8
12
20
50
80
12
18
23
25
50
80
150
20
80
80
150
150
Temperature
°C
Pressure
bar
Power
W
Control
Purge
control
Type
121 and 134
121 and 134
121 and 134
115 to 134
115 to 134
121 and 134
121 and 134
121 y 134
105 to 134
105 to 134
105 to 134
105 to 134
70 a 121
70 to 121
70 to 121
70 to 121
70 to 121
1 and 2
1 and 2
1
to 2
0.62 to 2
0.62 to 2
1 and 2
1 and 2
1 and 2
0.21 to 2
0.21 to 2
0.21 to 2
0.21 to 2
1
1
1
1
1
1000
1800
2500
3600
3600
1800
1500
1700
2510
3600
3600
7500
2500
3600
3600
7500
7500
Pressure thermostat
Pressure thermostat
Pressure thermostat
Electronic controller
Electronic controller
Microprocessor
Microprocessor
Microprocessor
Microprocessor
Microprocessor
Microprocessor
Microprocessor
Microprocesador
Microprocessor
Microprocessor
Microprocessor
Microprocessor
Manual
Atmospheric
Atmospheric
Atmospheric
Atmospheric
Purged vacuum
Purged vacuum
Purged vacuum
Purged vacuum
Purged vacuum
Purged vacuum
Purged vacuum
Automatic
Automatic
Automatic
Automatic
Automatic
Vertical bench top
Vertical bench top
Vertical
Vertical
Vertical
Horizontal bench top
Horizontal bench top
Horizontal bench top
Horizontal bench top
Vertical
Vertical
Vertical
Vertical
Vertical
Vertical
Vertical
Vertical
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
3
Autoclaves for sterilization “MICRO 8”, “MED 12” and “MED 20”
PRESSURE REGULATOR THERMOSTAT OF 1 AND 2 bar. TEMPERATURES 121 ºC AND 134 ºC.
VERTICAL DESKTOP MODELS. “MICRO 8” CAPACITY: 8 LITRES. “MED 12” CAPACITY: 12 LITRES.
VERTICAL STAND MODEL “MED 20” CAPACITY: 20 LITRES.
An economic alternative. Semiautomatics.
SAFETY:
SAFETY VALVE: PREVENTS THE PRESSURE WITHIN THE AUTOCLAVE OVERPASSING THE MAXIMUM SET LIMIT.
SAFETY PRESSURE: DISCONNECTS POWER TO THE HEATER IN CASE OF OVERPASSING THE PRESSURE SET LIMIT.
SAFETY THERMOSTAT: DISCONNECTS THE HEATING IN CASE OF OVERTEMPERATURE OR LACK OF WATER IN THE TANK.
THERMALLY INSULATED LID MADE OF MOLDED THERMOPLASTIC.
COMMON FEATURES
CONTROL PANEL
AISI 304 stainless steel external case and top.
Stainless steel chamber and lid, with easy opening.
INCOLOY special stainless steel heater element, which provides long life, low corrosion and
high temperatures resistance.
Manual air purge when starting (“MICRO 8” model).
Automatic atmospheric purge (“MED 12” and “MED 20” models).
Safety device to prevent lid opening.
Starting main switch.
1
REAR PART
Mains source.
Two fuse carriers.
Safety thermostat.
SIDE PART
Drain outlet.
Steam and drainage selective valve.
3
2
8
64
7
5
9
1. Pressure gauge.
2. Over temperature alarm light indicator.
3. Door open light indicator.
4. Sterilization phase light indicator.
5. Sterilization end of cycle light indicator.
6. Pressure selector 121ºC or 134ºC.
7. Light indicator at 121ºC.
8. Light indicator at 134ºC.
9. Timing from 0 to 60’.
Autoclave for sterilization “MICRO 8”
DESKTOP MODEL
MODEL
Part
No.
Capacity
litres
Ø
Height
(usable) cm
Height/Width/Depth
(exterior) cm
Power
W
4001745
8
24
15
40 38 38
1000
It comes complete with a stainless steel wire basket of Ø 22x14cm high. Part no. 1004771.
Weight
Kg
13
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
4
Autoclave for sterilization “MED 12”
DESKTOP MODEL
Features: see page 58
MODEL
Part
No.
Capacity
litres
Ø
Height
(usable) cm
Height/Width/Depth
(exterior) cm
Power
W
4001756
12
24 26
46 38 38
1800
It comes complete with a stainless steel wire basket of Ø 22x24cm high. Part no. 1004772.
Weight
Kg
18
Autoclave for sterilization “MED 20”
VERTICAL STAND MODEL.
CONFORMS TO APPARATUS PRESSURE REGULATION DIRECTIVES.
Features: see page 58
MODEL
Part
No.
Capacity
litres
Ø
Height
(usable) cm
Height/Width/Depth
(exterior) cm
Power
W
4001757
20
24 41
70 38 38
2500
It comes complete with two stainless steel wire baskets of Ø 22x24cm and Ø 22x14cm high.
Part no. 1004772 and 1004771.
Weight
Kg
41
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
5
Autoclaves for sterilization “Presoclave IlI” 50 and 80
MICROPROCESSOR TEMPERATURE AND CYCLE CONTROL AND ATMOSPHERIC PURGE.
ELECTRONIC CONTROL OF TIME AND TEMPERATURE RANGE FROM 115 °C TO 134 °C. (0.62 TO 2 bar).
CONFORMS TO APPARATUS PRESSURE REGULATION DIRECTIVES.
VERTICAL MODEL: 50 AND 80 LITRES.
SAFETY OVER PRESSURE VALVE:
SAFETY PRESSURE SWITCH:
SAFETY THERMOSTAT AND WATER LEVEL:
SAFETY LID:
SAFETY INSULATION:
SAFETY:
PREVENTS OVER PRESSURE ABOVE THE MAXIMUM SET LIMIT.
DISCONNECTS POWER TO THE HEATER IF THE UNIT EXCEEDS THE MAXIMUM PRESSURE LIMIT.
DISCONNECT POWER TO THE HEATER IF INSUFFICIENT WATER OR OVER TEMPERATURE.
PREVENTS THE LID BEING OPENED IF THE CHAMBER IS UNDER PRESSURE.
THERMALLY INSULATED LID .
An economic alternative, semi-automatic
FEATURES
External case made from stainless steel.
INCOLOY stainless steel heater elements, hard waring, resistant to corrosion and
high temperatures.
Sterilization chamber and door made from stainless steel.
Automatic purge to atmosphere
Lid,6 point closure.
CONTROL PANEL
1
2
3
4
5
6
13
7
8
9
10
11
12
1. Pressure gauge.
2. Illuminated alarm indicator.
3. Illuminated indicator end of cycle.
4. Illuminated indicator door open
5. Temperature display.
6. Time display
7. Temperature set pushbutton (range from 115 °C to 134 °C).
8. Pushbutton increase value.
9. Push button START
10. Push Button STOP
11. Push button Reduce value.
12. Push button select time, (range from 3’ to 99’).
13. Push button open lid.
MODELS
Part No.
Capacity
litres
Ø Height Height / Width / Depth Power Weight
(usables cm)
(exterior cm)
W
Kg
PRESOCLAVE IlI 50 4001758 50
30 70
117 48 62
PRESOCLAVE IIl 80 4002136 80
40 60
107 58 72
Does not include baskets and drums, order separately.
3000 75
3600 100
ACCESSORIES: AISI 304 Stainless steel wire baskets and drums.
For Presoclave lll 50, Part. no: 4001725.
Capacity, 3 baskets Ø 25 and 20 cm. height. Part No. 1000495
For Presoclave lll 80, Part. no: 4002136.
Capacity, 2 baskets Ø 36 and 28 cm. height. Part No. 1000496
Sterilization drum made from AISI 304 stainless steel.
For Presoclave lll 50, Part. no: 4001725.
Capacity, 3 drum Ø 25 and 18 cm. height. Part No. 1002418
For Presoclave lll 80, Part. no: 4002136.
Capacity, 2 drum Ø 35 and 27 cm. height. Part No. 1002419
Detergent Bio-Sel.
Water distillation unit especially for autoclaves.
USB adapter model. Pen-Drive included (Memory board) for data storage.
Part No: 4120131
BACK VIEW:
1
2
3
4
1. Mains power.
2. Safety valve.
3. Steam empty valve.
4. Safety thermostat
5. Drain selector valve.
5
COMPLEMENTS That needs to be factory installed:
Pt100 second sensor only temperature reader. Part No. 4001219 (see page 63).
Printer of continuous paper roll with print out of temperature, pressure, time
and mode. Part No. 4002421 (see page 62).
Loading and unloading crane. Part No. 1002426 (see page 70).
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
6
Autoclaves for sterilization “Autester ST DRY PV IIl”
NEW
DESIGN
MICROPROCESSOR PROCESS CONTROL.
AUTOMATIC VACUUM DRY AND PURGE “PREVACUUM”
PROGRAMMABLE TEMPERATURE FROM 105 °C TO 134 °C (0.21 TO 2 bar).
CONFORMS TO APPARATUS PRESSURE REGULATION DIRECTIVES.
VERTICAL FLOOR STANDING MODEL: 50, 80 AND 150 LITRES.
CONFORMITY
EN 61010-1
SAFETY FOR EQUIPMENT FOR LABORATORY USE
EN 61010-2-040
SAFETY FOR STERILIZER EQUIPMENT FOR LABORATORY USE
EN 61326
ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT FOR LABORATORY USE.
FEATURES
Stainless steel exterior and top.
Stainless steel lid.
Lid, six closure point system.
Pulsed vacuum system and atmosphere purge.
Incorporated steam generator, connected to the main chamber.
Water reservoir for clean water for the steam generator boiler.
External water connection if required.
6 function modes.
RS 232 for PC parameters printing (back side).
Printer output.
USB output for PEN-DRIVE data logging and Computer connection.
Connection for a second temperature sensor.
Memory for 9 customer set programs.
USB
SAFETY
Safety: The lid cannot be opened if the chamber is under pressure.
Safety valve: Prevents over pressure over the maximum limit.
Safety pressure switch: switches the heater power off to if over pressure.
Safety Lid: insulated lid protection.
DIAGRAM SHOWING THE FUNCTION CYCLE AUTESTER ST DRY PV III
CONTROL PANEL
TFT touch screen with virtual pushbuttons.
10 11 BACK VIEW
3
1
4
1
5
2
6
2
3
4
1. Graphical representation of real time process
2. Start/Stop virtual pushbutton.
3. Running program.
4. Press indicator.
5. Temperature indicator.
6. Running program parameters.
5
6
7
8
1. Mains input.
2. External water supply.
3. Safety valve.
4. Vacuum vapour valve.
5. Air in filter valve.
6. Safety thermostat.
7. Safety thermostat.
8. Empty tank valve.
9. Drain tank valve.
10. RS232 connector.
11. 2nd Temperature sensor con
nection.
9
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
7
MICROPROCESSOR FEATURES
The microprocessor controls the performing of the air extraction process, sterilizing and drying, executing
the selected procedures and commands by the user, adjusting the following parameters:
• Sterilization temperature from 105°C up to • Calibration
134°C.
- Temperature probe 1 - Temperature probe 2
• Sterilization time from 3’ to 59’.
- Water dosing.
• Drying time from 20’ to 60’.
• Audible and visual alarm for overtemperature
• Up to 10 user-configurable programs.
and insufficient temperature.
• Six operating modes:
• Network failures detection and memorization
- Solid 1 - Solid 2 fractions. - Solid 3 fractions - • Safety therrmostat by software
Drying - Liquids - Liquids 2 probes
• Sterilization cycles data logging with capacity
• Verification test
for over 500 cycles.
- Vacuum - Bowie Dick.
• Internal cleaning program
• Settings:
• Software for PC
- Units – languages (Spanish, English, French).
• Temperature correcction
- USB or printer module. - Clock: date/time.
• Summarized user manual on screen
- External water: on/off.
• Graphical representation of real time process
• Password
Error messages of functions and program execution are displayed and an acoustic alarm sounds.
The vapour generator automatically cuts out.
MESSAGES:
1. E 2PROM
2. RTC FAULT
3. SENSOR PRECISION
4. HEATER PROBE
5. CHAMBER PROBE
6. OVER PRESSURE
7. VACUUM
8. PRESSURE
9. BOILER TEMPERATURE
10. TEMPERATURE LOW FAULT
11. INPUT ERROR
12. STERILIZATION
13. LEVEL 1
14. LEVEL 2
15. DOOR
16. PRINTER NO PAPER
17 PAPER JAM
18. ELECTRICAL FAULT
MODELS
Part No.
Dry
Capacity
litres
Ø / Height
(usables) cm
Height / Width / Depth
(exterior) cm
Temp.
°C
Water
Reservoir
H2O capacity.
AUTESTER ST DRY PV lll 50
4002516 Yes
50
30 63
117 48 62
105 to 134
10
AUTESTER ST DRY PV lll 80
4002517 Yes
80
40 60
107 58 72
105 to 134
10
AUTESTER ST DRY PV lll 150* 4002518 Yes
150
50 70
118 80 95
105 to 134
20
Comes without baskets and drums.
* The part number 4002426 due to its power rating is only manufactured for three phase 230V or 400V. Specify preference when ordering.
COMPLEMENTS: Factory fitted options.
Printer of continuous paper roll with print out
of temperature, pressure, time and mode. Part
No. 4002417
Pt100 Sensor (See page 63).
Loading and unloading crane. Part No.
1002426 (see page 70).
ACCESSORIES: AISI 304 Stainless steel wire baskets and drums.
For Autester ST DRY PV-ll 50, Part No: 4002515.
Capacity, 3 baskets Ø 25,5 and 20 cm. height. Part No: 1000495
For Autester ST DRY PV-ll 80, Part No: 4002425.
Capacity, 2 baskets Ø 36 and 28 cm. height. Part No: 1000496
For Autester ST DRY PV-ll 150, Part No: 4002426.
Capacity, 3 baskets Ø 44,5 and 22 cm. height. Part No: 1000780
Sterilization drum made from AISI 304 stainless steel.
For Autester ST DRY PV-ll 50, Part No: 4002515.
Capacity, 3 drum Ø 25 and 18 cm. height. Part No. 1002418
For Autester ST DRY PV-ll 80, Part No: 4002425.
Capacity, 2 drum Ø 35 and 27 cm. height. Part No. 1002419
Detergent Bio-Sel. (see page 63)
Water distillation unit especially for autoclaves. (see page 63).
Basket
size
Power
W
Weight
Kg
3
2
3
3000
4850
7500*
108
136
250
PARAMETERS AND PROGRAMS PRE INSTALLED IN THE AUTOCLAVE MICROPROCESSOR
(Note: All these parameters are adjustable by the user)
Nº
Programme
0
1
2
3
4
5
6
7
8
9
Description
Temperature
Sterilization
Time
Sterilization
Time
Dry
Purge
Free
Unwrapped instruments
Wrapped instruments
CJD
Delicate unwrapped
Delicate wrapped
Disinfecting
Liquids
Solids
Solids
134 °C
134 °C
134 °C
121 °C
121 °C
105 °C
121 °C
121 °C
134 °C
4 min
12 min
20 min
15 min
30 min
25 min
30 min
15 min
4 min
15 min
30 min
20 min
15 min
30 min
15 min
30 min
30 min
2 (1)
3 (2)
3 (2)
2 (1)
3 (2)
1 (3)
1 (3)
1 (3)
1 (3)
(1) Double Vacuum purge.
(2) Triple Vacuum purge.
(3) Atmospheric purge (No vacuum).
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
8
OPTIONS: for vertical autoclaves, need to be factory fitted.
Pt 100 Sensor. 2nd Probe for reading sample temperature.
To guarantee in all circumstances that the system has completed the cycle to the set time and temperature parameters, the Autester ST DRY PV II autoclave can be installed with a temperature probe that can
be placed within the culture flask, residual packets etc.
When the probe is connected to the controller of the autoclave, it is automatically recognised by the microprocessor, whereby the real time temperature values detected by the probe, are displayed and printed.
For autoclaves PRESOCLAVE lll this Pt100 sensor only reads the temperature with an external thermometer.
Part No. 4001219
Loading and unloading crane. Part No. 1002426 (see page 70).
ACCESSORIES FOR VERTICAL AUTOCLAVES
AISI 304 stainless steel wire baskets.
Part No.
Ø
cm
Height
Suitable for autoclaves
Part No.
Number of
baskets
1004771
22
14
4001745
1
1004772
22
24
4001756
1
1004771
22
14
4001757*
1
+
´1004772
22
24
4001757*
1
1000495
27
20
4001758 - 4002516
3
1000496
36
28
4002136 - 4002517
2
1000780
44
22
4002518
3
Note:* For autoclave Part No. 4001757 supplied with 1 basket Part No. 1004771 + 1 basket Part No. 1004772
AISI 316 stainless steel wire dividers for autoclave baskets.
Part No.
1001217 4 divider compartments for basket part no. 1000495.
1001218 6 divider compartments for basket part no. 1000496.
1001222 7 divider compartments for basket part no. 1000780.
Sterilization Drums.
Part No.
Ø
Height
cm
Suitable for autoclaves
Part No.
Capacity
Drums
3
2
1002418
1002419
25 18
35 27
4001758 - 4002516
4002136 - 4002517
1002420
28 18
Not suitable for our autoclaves.
Water distiller, specially for autoclaves “DEST-4”.
No
Distillation capacity: 1.5 litres/hour. Internal capacity 4 litres.
external
Case made from thermo resistant plastic.
additional
water
Internal stainless steel.
required
Cooling by forced air though a condenser. Without glass heater elements.
Easy to use. Safety cut out system if over temperature due to insufficient water.
Comes complete with a 4 litre three way dispenser plastic bottle with filter.
Note: for daily use it is recommended to change the filter every 3 months.
Part No.
Capacity
Distillation litre/Hour
Conductivity
µs/cm
4001729
1.5
5
Spare: Dispenser spout with filter. Part No. 4001730
Ø Height
cm
Power
W
Weight
Kg
29 39
750
3.5
Detergent “BIO-SEL”
We recommend the use of BIO-Sel detergent for cleaning, it is also biodegradable and free from
Phosphates.
Part No.
1000025 Capacity 1 litre.
1000026 Capacity 4 litres.
1000852 Box of 12 x 1 litre flasks.
1000853 Box of 4 x 4 litre flasks.
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
9
Autoclave for liquids and solids sterilization “Autester ST DRY PV lll” 25
CAPACITY: 25 LITRES. SPACE FOR 12 BOTTLES OF 250 ML, 9 OF 500 ML, 3 OF 1000 ML AND 2 OF 2000 ML.
CONFORMS TO THE REGULATION - 97/23/CEE EQUIPMENT UNDER PRESSURE.
Complete selection of programs. Displays in English - Spanish - French.
FEATURES
Sterilization chamber and lid made from AISI 316 stainless steel.
External case epoxy coated.
Digital control of all autoclave operations.
Large back lit LCD 2 x 24 character display.
Air filter, purifies air before entering in the sterilization chamber.
Separate clean water reservoir and waste water.
RS-232 Interface output of parameters to a computer or for printer.
USB output for PEN-DRIVE data logging and Computer connection.
NEW
DESIGN
USB
SAFETY
Safety valve.
Prevents the door being opened if under pressure or high temperature is produced.
Temperature safety thermostat.
Door closed correctly detector
Thermally protected lid.
MICROPROCESSOR FUNCTIONS
Controlled parameters are:
• Sterilization temperature from 105°C up to 134°C.
• Sterilization time from 3’ to 59’.
• Drying time from 20’ to 60’.
• Up to 10 user-configurable programs.
• Six operating modes:
- Solid 1 - Solid 2 fractions. - Solid 3 fractions - Drying - Liquids - Liquids 2 probes
• Verification test
- Vacuum - Bowie Dick.
• Settings:
- Units – languages (Spanish, English, French). - USB or printer module. - Clock:
date/time. - External water: on/off.
• Password
• Calibration
- Temperature probe 1 - Temperature probe 2 - Water dosing.
• Audible and visual alarm for overtemperature and insufficient temperature.
• Network failures detection and memorization
• Safety therrmostat by software
• Sterilization cycles data logging with capacity for over 500 cycles.
• Internal cleaning program
• Software for PC
• Temperature correcction
• Summarized user manual on screen
• Graphical representation of real time process
CONTROL PANEL
TFT touch screen with virtual pushbuttons.
3
1
4
5
2
6
1. Graphical representation of real time process
2. Start/Stop virtual pushbutton.
3. Running program.
4. Press indicator.
5. Temperature indicator.
6. Running program parameters.
MODEL
Part No.
Capacity Ø/Depth Height/Width/Depth Power Weight
litres (usables) cm (exterior) cm
W
Kg
AUTESTER ST DRY PV lll 25 4002420 25 30 35 58 46 59 2510 52
Comes complete with three trays, extractor forceps, and
additional support for instruments and sterile wrapping
bags.
PARAMETERS AND PROGRAMS PRE INSTALLED IN THE AUTOCLAVE MICROPROCESSOR
(Note: All these parameters are adjustable by the user)
Nº
Programme
Description
0
Free
1
Unwrapped instruments
2
Wrapped instruments
3
CJD
4
Delicate unwrapped
5
Delicate wrapped
6
Disinfecting
7
Liquids
8
Solids
9
Solids
(1) Double Vacuum purge.
(2) Triple Vacuum purge.
(3) Atmospheric purge (No vacuum).
MESSAGES:
1. E 2PROM
2. RTC FAULT
3. SENSOR PRECISION
4. HEATER PROBE
5. CHAMBER PROBE
6. OVER PRESSURE
7. VACUUM
8. PRESSURE
9. BOILER TEMPERATURE
Temperature
Sterilization
Time
Sterilization
Time
Dry
Purge
134 °C
134 °C
134 °C
121 °C
121 °C
105 °C
121 °C
121 °C
134 °C
4 min
12 min
20 min
15 min
30 min
25 min
30 min
15 min
4 min
15 min
30 min
20 min
15 min
30 min
15 min
30 min
30 min
2 (1)
3 (2)
3 (2)
2 (1)
3 (2)
1 (3)
1 (3)
1 (3)
1 (3)
10. TEMPERATURE LOW FAULT
11. INPUT ERROR
12. STERILIZATION
13. LEVEL 1
14. LEVEL 2
15. DOOR
16. PRINTER NO PAPER
17 PAPER JAM
18. ELECTRICAL FAULT
ACCESSORIES
Ink Printer (no thermal).
Paper size 2 1/4’’ (56 mm) wide.
Includes communications and power cable.
Model
Part No.
Height/Width/Depth
cm
Power
Weight
Kg
4120113 4 16 10 DC 5V 3A 1
Water distiller especially for Autoclaves. (See page 63).
Bag sealers (See page 68).
Special tray for bottles of 0.25, 0.5, 1 or 2 litres. Part No. 4002416
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
10
Autoclave for sterilization “Autester ST DRY PV” Class B
AUTOMATIC VACUUM DRY AND PURGE.
PROGRAMS TO 121 °C AND 134 °C (1 AND 2 bar).
MODEL HORIZONTAL. CAPACITY: 12, 18, AND 23 LITRES.
APPLICATIONS
"Class B" autoclaves are used within the field of general medicine, dentistry, veterinary, tattoo parlours and sterilization applications in general, to sterilize any material
that could have been in contact with body fluids including blood.
The general capabilities of the instrument are regulated by EN 13060 that guarantees the differing sterilization applications.
The normal processes include: Solids with and without wrapping, porous material
with and without wrapping and utensils that have cavities and holes (e.g. dentistry
materials.)
EN 13060
EN 61010-1
EN 61010-2-040
EN 61326
To guarantee sterilization of these materials the “AUTESTER ST DRY PV” Class B, autoclaves, have an efficient staged vacuum, that performs a complete extraction of air
that allows penetration of the steam vapour.
The same vacuum system is used to obtain the dry phase, which is required for perfect storage of sterilized materials.
The “AUTOCLAVES ST DRY PV” Class B includes verification and validation programs.
CONFORMITY:
SMALL GENERAL PURPOSE STEAM STERILIZERS.
EQUIPMENT SAFE FOR LABORATORY USE.
SAFETY FOR STERILIZER EQUIPMENT FOR LABORATORY USE
ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT USED IN THE LABORATORY.
SAFETY:
SAFETY VALVE: PREVENTS THE PRESSURE EXCEEDING THE MAXIMUM SET LIMIT.
SAFETY THERMOSTAT: DISCONNECTS THE HEATER AGAINST OVER TEMPERATURE OR LOW WATER IN THE RESERVOIR.
THERMALLY INSULATED LID.
12 litres
18 and 23 litres
Staged fractional vacuum: Extracts air from the load
that permits absolute steam vapour penetration.
Sterilization stage: Sterilization within the time and
temperature selected.
Dry cycle: Extracts the humidity from the load leaving it
suitable for storage.
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
11
Autoclave for sterilization Autester “ST DRY PV” 12 Class B
CAPACITY: “ST DRY PV”: 12 LITRES.
According to directive: 97/23/CEE equipment under presure,3.3.
FEATURES
Stainless steel internal chamber.
Staged vacuum purge.
Dry by vacuum
Incorporated steam generator.
Water reservoir to supply the chamber
High vapour penetration of porous material
Used in digestive studies, ophthalmology, operating
theatres etc .
Printer interface.
USB adapter for parameters memorization (optional).
SAFETY
Safety valve. Prevents over pressure over the maximum working limit.
Safety thermostat. Disconnects power to the heater
if over temperature or low water in the reservoir.
Thermally protected lid.
USB
CONTROL PANEL
9
1
5
2
4
3
10
15
11
16
12
17
13
TEMPERATURE CONTROL AND AUTOMATIC MICROPROCESSOR CYCLE.
10. Select wrapped or non wrapped.
11. Test.
12. Fast sterilization.
13. "maintain hot" the chamber.
14. Preheat.
15. Pressure indicator (bar).
16. Temperature indicator (°C).
17. Time Indicator (min.).
1. Textile materials
2. 121 °C.
3. 134 °C.
4. Wrapped solids.
5. Solids (Not wrapped).
6. Low level water indicator.
7. Autoclave ready for operation.
8. Sterilization cycle in process
9. Program selection.
14
6
7
8
CYCLES
134 °C
Wrapped
134 °C
Not Wrapped
121 °C
Wrapped
121 °C
Not Wrapped
Textiles
Test
Bowie Dick
Test
Vacuum
Sterilization Temperature
134 °C
2.1 bar
8 min.
12 min.
10 min.
134 °C
2.1 bar
4 min.
4 min.
10 min.
121 °C
1.1 bar
8 min.
30 min.
10 min.
121 °C
1.1 bar
4 min.
20 min.
10 min.
134 °C
2.1 bar
8 min.
12 min.
15 min.
134 °C
3.5 min.
1 min.
2.1 bar
10 min.
-
Sterilization pressure
Vacuum purge time
Sterilization time
Dry time
MODEL
AUTESTER ST DRY PV B 12
Part No.
Capacity
litres
4001727
12
Ø / Depth
cm
20 35
External dimensions
cm
Height Width Depth
39,2 48,7 60
Trays dimensions
cm
Height Width Depth
1,8 14
29,5
Power
W
1800
Weight
kg
42,2
ACCESSORIES
Comes complete with:
spare joint, door adjustment key, support with three trays,
extractor forceps, empty water filter and waste water out.
USB adapter model.
Pen-Drive included (Memory board) for data storage.
Part No: 4120130
Thermal Printer.
Paper size 2 1/4’’ (56 mm) wide.
Includes communications and power cable.
Power: DC 5V 3A
Part No: 4120123
Water distiller especially for Autoclaves. (See page 63).
Bag sealers (See page 68).
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
12
Autoclave for sterilization “Autester ST DRY PV” 18 Class B
“ST DRY PV” 23 Class B
CAPACITY: “ST DRY PV” 18: 18 LITRES. “ST DRY PV” 23: 23 LITRES..
According to directive: 97/23/CEE equipment under presure,3.3.
FEATURES
Digital electronic control.
Stainless steel internal chamber.
Staged vacuum purge.
Dry by vacuum
Incorporated steam generator.
Water reservoir to supply the chamber
High vapour penetration of porous material
Used in digestive studies, ophthalmology, operating theatres etc.
Automatic or manual filling of the water tank.
Printer interface.
USB adapter for parameters memorization (optional).
NEW
DESIGN
USB
SAFETY
Mechanism door lock, prevents the door being opened
accidentally.
Safety valve. Prevents over pressure over the maximum
working limit.
Safety thermostat. Disconnect power to the heaters if over
temperature or low water in the reservoir are produced.
Thermally insulated lid.
Dirty water tank full alarm.
CONTROL PANEL
1. LCD screen.
2. Push button increase parameters.
3. Push button decrease parameters.
4. Push button menu.
5. Push button Start-Stop.
1
2
3
CYCLES
134 °C
Emergency
134 °C
Solid
Sterilization Temperature
134 °C
2,1 bar
1
4 min.
8 min.
134 °C
2,1 bar
1
4 min.
4 min.
Sterilization pressure
Vacuum purge number
Sterilization time
Dry time
MODEL
AUTESTER ST DRY PV 18
AUTESTER ST DRY PV 23
TEMPERATURE CONTROL AND AUTOMATIC MICROPROCESSOR CYCLE.
4
5
134 °C
Hollow
134 °C
Sanguinary
134 °C 134 °C
2,1 bar 2,1 bar
4
3
4 min. 18 min.
10 min. 10 min.
Part No.
Capacity
litres
4001734
4001735
18
23
121 °C
Solid
121 °C
Hollow
134 °C
Glass
121 °C
Tampon
121 °C
1,1 bar
1
20 min.
8 min.
121 °C
1,1 bar
3
20 min.
10 min.
134 °C
1,1 bar
1
4 min.
4 min.
121 °C
1,1 bar
3
30 min.
18 min.
Ø / depth
cm
24,5 36
24,5 47
External dimensions
cm
Height Width Depth
40
40
47
47
83
94
134 °C
Bowie Dick
134 °C 134 °C
2,1 bar 2,1 bar
3
3
3,5 min. 3,5 min.
3min.
3 min.
Trays dimensions
cm
Height Width Depth
2
2
134 °C
Helix
20,5
20,5
28
38
134 °C
User-defined
Test
Vacuum
134 °C
3
4 min.
3 min.
-
Power
W
Weight
kg
1500
1700
46,6
48
ACCESSORIES
Comes complete with:
spare joint, door adjustment key, support with three trays,
extractor forceps, empty water filter and waste water out.
USB adapter model.
Pen-Drive included (Memory board) for data storage.
Part No: 4120130
Ink Printer (no thermal).
Paper size 2 1/4’’ (56 mm) wide.
Includes communications and power cable.
Power: DC 5V 3A
Part No: 4120123
Water distiller especially for Autoclaves. (See page 63).
Bag sealers (See page 68).
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
13
Bag sealer “S-400”
SUITABLE FOR POLYPROPYLENE-POLYESTER STERILISING
BAGS WITH A PAPER BASE.
FEATURES
Metal epoxy covered case.
Pressure sealer. Manual cut.
Stainless steel AISI 304 reel support at
the back.
CONTROL PANEL
Illuminated mains switch.
Lamp on when the thermostat has reached the pre-set working temperature.
MODEL
Part No.
4100041
Seal Width
mm
Maximum seal
length mm
Height / Width / Depth
(exterior) cm
Power
W
Weight
Kg
9
270
12 35 21
200
5.3
Bag sealer “Seal-1000”
FOR POLYPROPYLENE AND POLYESTER BAGS WITH A STERILE PAPER BASE.
FEATURES
Metal construction with stainless steel
tray.
Pressure sealer unit with lateral leaver
with two bilateral cutting edges.
Constant sealing temperature (from
180 °C and 200 °C).
Part No.
4101712
External support for rolls of up to
240mm wide, with adjustable separator
sides to accommodate different roll
sizes.
CONTROL PANEL
Illuminated start switch.
Indicator, optimum seal temperature.
Seal width
mm
Maximum seal
length mm
Height / Width / Depth
(exterior) cm
Power
W
Weight
Kg
10
260
30 36 43
400
6.5
Automatic bag sealer “Seal-Com 2”
IN ACCORDANCE WITH DIN 58953 SECTION 7 STANDARD. FOR SEALING STERILE PAPER, POLYPROPYLENE-POLYESTER BAGS.
CONTINUOUS SEALING, AUTOMATIC ADVANCE.
Continuous Thermosealer
FEATURES
Exterior made from stainless steel.
Heating time: 4 minutes.
Seal width: 10 mm.
Sealing speed: 6 m/min.
Digital control and display of temperature and time.
Acustic sign of cycle starting.
CONTROL PANEL
Luminous “ON” switch.
Luminous “Manual or Automatic”
switch.
MODEL
Part No.
4100044
Height / Width / Depth
(sealer) cm
Power
W
Weight
Kg
16 48 26
400
13
SEALING MACHINE ACCESSORIES
Rolls of paper for sterilization “Polisteril”
Paper base polypropylene and polyester bags showing
differing ink prints of sterilized items.
Part No.
Bag width cm
Bag length m
4100075
7,5
100
4100100
10
100
4100200
20
100
Sterile paper “Policort” trimmer
Completely made of metal with back and reel support,
for a capacity of 2 x 200mm or 4 x 100 mm wide reels.
Circular cutting knife edge.
Measurements: 13 high x 51 wide x 32 cm deep.
Weight: 2.8 Kg.
Part No. 4100045
Date stamping machine for sterile bags.
Part No. 4100046
STERILIZED
30 OCTOBER 2015
VALID FOR 3 MONTHS.
OPTIONS: Ultrasonic cleaning baths for dentistry, “Ultrasons-Digit” (see page 96). Dry sterilizer “DRYTIME” poupinel oven (see page 137).
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
14
Autoclaves for preserved food pasteurization/sterilization
“STERIL-FOOD” 20, 80 and 150
SELECTABLE TEMPERATURE BETWEEN 70 ºC & 121ºC.
CAPACITY: 20, 80 & 150 L.
AUTOCLAVES "MAN" MODEL NEED A COMPRESSED AIR EXTERNAL INSTALATION.
AUTOCLAVES "COM" MODEL INCLUDE COMPRESOR AND DO NOT NEED COMPRESSED AIR INSTALLATION.
WATER SUPPLY NEEDED WITH LOW-CAL CONTENT AND DRAINAGE. (WATER PRESURE: 3 BAR MINIMUM).
CONFORMITY
EN 61010-1
EN 61010-2-040
EN 61326
EN/97/23/EC
SAFETY FOR EQUIPMENTS FOR LABORATORY USE .
SAFETY FOR STERILIZER EQUIPMENTS.
ELECTROMAGNETIC COMPATIBILITY.
SAFETY FOR PRESSURE EQUIPMENTS.
APPLICATIONS
Preserved food sterilization.
Very suitable for small productions and wide variety.
NEW
USB
FEATURES
External case, top, tank and lid made of stainless steel.
Tank fill by external water inlet.
Temperature control probe inside the sample.
Counter pressure system to prevent the cans breakage.
Temperature, time and pressure registered in USB.
SAFETY
Device that avoids opening the lid when the chamber is under pressure.
Safety valve: Prevents overpressure over the maximum limit.
Safety pressure switch: Disconnects heater when there’s overpressure.
Thermally insulated lid.
Door properly closed detector.
Double filter retention
CONTROL PANEL
1. Parameters LCD display.
5
2. Microprocessor single button.
3. Operation Led.
4. Start/stop push button.
7
5. USB adapter.
6. Open lid knob.
7. USB function light indicator. 1
6
2
3
4
MICROPROCESSOR FEATURES
Microprocessor controls sterilization and cooling process:
• Pasteurization temperature from 70ºC to 100°C.
• Sterilization temperature from 100ºc to 121ºC.
• Sterilization time from 1' to 99’:
• Selectable cooling temperature.
• Programs – from 0 to 9 user configurable.
• Configuration: - Units.
– Languages (Spanish, English, French).
- Timer: date/hour. – External water: on/off.
• Password
• Calibration – Control probe temperature.
- Sample probe temperature
Any error message of functions or execution is displayed in the panel and an
acoustic alarm sounds, automatically cutting the steam generator out.
BENEFITS
Water quick cooling.
High efficiency in heat treatment
Respect the organoleptic properties of food.
Easy and quick changing of heat treatment parameters.
10 user defined programs.
Models with built-in compressor.
8
1
2
3
4
5
6
7
BACK VIEW
1. Mains input.
2. External water supply.
3. Safety valve.
4. Vacuum steam valve.
5. Safety thermostat.
6. RS232 connector.
7. Second probe connector.
8. Compressed air inlet.
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
15
MODELS
Part No.
Drying
Capacity
litres
Ø / Height
(usable) cm
Height/Width/ Depth
(external) cm
Temp.
°C
Capacity
baskets
Power
W
STERIL-FOOD COM 20
4002421 NO
20
24 41
70 38 38
70 to 121
2
2500
STERIL-FOOD MAN 80
4002427 NO
80
40 60
107 58 72
70 to 121
2
3600
STERIL-FOOD COM 80
4002422 NO
80
40 60
107 58 72
70 to 121
2
3600
STERIL-FOOD MAN 150*
4002428 NO
150
50 70
118 80 95
70 to 121
3
7500*
STERIL-FOOD COM 150*
4002423 NO
150
50 70
118 80 95
70 to 121
3
7500*
It is supplied without baskets or drums. *Part numbers 4002428 and 4002423, due to their power consumption are manufactured for three phase 230V or 400V.
Specify preference when ordering.
COMPLEMENTS FOR “PRESOCLAVE III 50 - 80”, “AUTESTER ST DRY
PV III 50 - 80 - 150” AND “STERIL-FOOD 80 - 150”
ACCESORIES FOR STERIL-FOOD
Loading and unloading crane
Baskets elevator for loading and unloading of autoclaves of 50, 80 and 150L
With adapter for handling baskets without deforming.
Axial rotation for placing baskets to a trolley.
Total lift height: 2.4 m (autoclave assembled)
Outside completely stainless steel.
Maximum load: 50Kg.
Power: 230V 300W
Must be factory installed.
Control panel: ON / OFF button + UP / DOWN pushbutton integrated into a single command.
Part No: 1002426
Decalcifier “C-3”
APPLICATIONS
Pre-treatment of water with high content of lime, for general laboratory use.
Recommended for distillation units use, from 25° French
water hardness.
NEW
Weight
Kg
55
136
136
250
250
TECHNICAL DATA
AISI 304 stainless steel metallic tank with manual device of
salt regeneration by two-way wrenches.
Resin capacity: 12 litres. Regeneration by salt: 2 Kg.
Cyclical output by regeneration: 1200 litres at 60° French
degrees / 4800 litres at 35° French degrees.
Cyclical output by regeneration for distillation: from
300 to 800 litres.
Maximum mains inlet pressure: 4,5 Kg/cm2.
Maximum input permissible hardness: 60° French degrees.
Output hardness: 1° French degree.
External measurements: 62 height x 19 cm Ø. Weight: 20 Kg. It comes complete with ¾ in
Part Number 0703052
and out hoses.
AISI 304 stainless steel wire baskets. Maximum load capacity: 8 kg.
Part No.
1000496
1000780
1000786
For autoclave
litres
80
150
150
Ø / Height
(Usable) cm
36 x 28
45 x 22
47 x 15
Capacity
baskets
2
3
5
Bottle capacity
Ø72x85mm Ø82x115mm
55
162
150
55
150
95
Note: To optimize the load in the autoclave, we manufacture baskets on demand suitable to the size and
weight of your containers.
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
16
Download PDF

advertising