MAGTROL
3411
Data Sheet
Model 3411
Torque Display
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
For use with all Magtrol TM / TMHS / TMB In-Line
Torque Transducers and TF Torque Flange Sensors
High Quality, Easy-to-Read Vacuum Fluorescent
Readout: Displays torque, speed and power
Addition of high resolution quadrature encoder enables
low RPM applications or position measurements
Selectable English, Metric and SI Torque Units
Isolated USB Interface
Ethernet connectivity
Torque: Analog, raw sensor output
Speed output; analog or digital, user selectable
BITE: Built-In Test Equipment
Overload Indication
Tare Function
Includes Magtrol Torque 7 Software
High Speed Data Acquisition: Up to 500 torque and
speed points per second with time stamp
Rack mount or handle versions available
DESCRIPTION
Magtrol’s Model 3411 Torque Display is designed for use with
all Magtrol TM, TMHS, TMB and TF Torque Transducers. This easy-to-use device powers the transducer and utilizes
high speed processing to display torque, speed and mechanical
power. It includes a tare function to help offset any slight
residuals caused by couplings or suspended loads. The
3411 may also be used with any torque sensors requiring 24
V DC power (500 mA max.) with ± 5 V DC torque output
(± 10 V DC max.) and open collector, TTL or CMOS output
for the speed signal.
Torque 7 Software
Magtrol’s Torque 7 Software is a user-friendly LabView®
executable program, used to automatically collect torque, speed
and mechanical power data. The data can be printed, displayed
graphically or quickly saved as a Microsoft® Excel spreadsheet. Standard features of Torque 7 include:
• Measured Parameter vs. Time
• Adjustable Sampling Rates
• Polynomial Curve Fitting
• Peak Torque Capture
• Direction of Rotation
• Multi-Axes Graphing
• Optional USB Interface: for reading up to 4 thermocouples
System Configuration
TF Torque
Flange Sensor
Receiver
PC
Torque 7
Software
– OR –
MODEL 3411
TORQUE DISPLAY
TM, TMHS or TMB Series
In-Line Torque Transducer
1
www.magtrol.com
Specifications
3411
MEASUREMENT CHARACTERISTICS
Maximum Speed /
199,999 rpm / 199,999 Hz
Input Frequency
Speed: 0.01% of reading from
Accuracy
5 rpm to 199,999 rpm
Torque: 0.02% of range (± 10 V)
ELECTRICAL CHARACTERISTICS
Fuses (5 × 20 mm)
IEC 500 mA 250 V T
Power Requirements
36 VA
Voltage Requirements 120/240 V 60/50 Hz**
INPUTS AND OUTPUTS
Speed/Angle: Open Collector, 5 V HC,
Transducer Inputs
TTL, CMOS
Torque:
± 10 V DC max
Torque Output BNC
±10 V DC (direct from transducer)
5 V HC pulse (buffered from transducer) or
Speed Output BNC
+/- 10 VDC analog
* Sensor power available at 14 pin connector:
5 VDC 200 ma, fused internally at 500 ma
24 VDC 500 ma, short circuit protected
** The 3411 has built-in Over Voltage protection on the AC power entry in
order to comply to CE requirements. Do not perform insulation tests at a
voltage higher than 250 VDC.
ENVIRONMENT
Operating Temperature 5 ºC to 50 ºC
Relative Humidity
< 80%
Temperature Coefficient 0.001% (5 ºC to 50 ºC)
of FS/ºC
DIMENSIONS
Width
10.14 in 257.5 mm
Height
4.05 in
103 mm
Depth
10.80 in 274.3 mm
Weight
5.11 lb
2.32 kg
Front Panel
Displays Torque, Speed and Mechanical Power Values
Torque Scale
xx.xx N·m / 5V
Pulse Per
Revolution
1 to 99,999
Power Units
W, kW, HP
System
Setup
Tare
Reset
Tare
Display Units
Oz·in, Oz·ft, Lb·in, Lb·ft, g·cm,
kg·cm, mN·m, cN·m, N·m, daN·m
2
MAGTROL
Ordering Information
3411
Rear Panel
Torque
Output
Speed
Output
USB connection
Transducer connection For Use With Any Magtrol TM,
TMHS,TMB or
TF Torque Transducer
(or other brand torque sensor)
Ethernet
connection
Accessories
Description
TM / TMHS / TMB In-Line Torque Transducer Connector Cable, 5 m
TM / TMHS / TMB In-Line Torque Transducer Connector Cable, 10 m
TM / TMHS / TMB In-Line Torque Transducer Connector Cable, 20m
TF Flange Torque Transducer Connector Cable, 5 m
TF Flange Torque Transducer Connector Cable, 10 m
TF Flange Torque Transducer Connector Cable, 20m
SBB-14 for optional high resolution encoder attachment
Model #
ER 113/01
ER 113/02
ER 113/03
ER 116/01
ER 116/02
ER 116/03
SBB-14
Ordering Information
Description
Torque Display
Torque Display with Handle
Torque Display with Rack Mount
Model/Part #
3411
3411-HDL
3411-RMK
Stock Code
006862
007017
007015
Due to the continual development of our products, we reserve the right to modify specifications without forewarning.
Magtrol Inc
70 Gardenville Parkway
Buffalo, New York 14224 USA
Phone: +1 716 668 5555
Fax: +1 716 668 8705
E-mail: magtrol@magtrol.com
Magtrol SA
Route de Montena 77
1728 Rossens / Fribourg, Switzerland
Phone: +41 (0)26 407 3000
Fax: +41 (0)26 407 3001
E-mail: magtrol@magtrol.ch
Subsidiaries in:
Germany • France
China • India
Worldwide Network
of Sales Agents
3411-US 12/16
www.magtrol.com
Download PDF