Form No.8FA7-EA-15G

Mazda5_8FA7-EA-15G_Edition2 Page1
Friday, July 10 2015 5:25 PM
Form No.8FA7-EA-15G
Black plate (1,1)
Mazda5_8FA7-EA-15G_Edition2 Page2
Friday, July 10 2015 5:25 PM
Form No.8FA7-EA-15G
Black plate (2,1)
Mazda5_8FA7-EA-15G_Edition2 Page3
Friday, July 10 2015 5:25 PM
Black plate (3,1)
A Word to Mazda Owners
Thank you for choosing a Mazda. We at Mazda design and build vehicles with complete
customer satisfaction in mind.
To help ensure enjoyable and trouble-free operation of your Mazda, read this manual
carefully and follow its recommendations.
An Authorized Mazda Dealer knows your vehicle best. So when maintenance or service is
necessary, that's the place to go.
Our nationwide network of Mazda professionals is dedicated to providing you with the best
possible service.
We assure you that all of us at Mazda have an ongoing interest in your motoring pleasure
and in your full satisfaction with your Mazda product.
Mazda Motor Corporation
HIROSHIMA, JAPAN
Important Notes About This Manual
Keep this manual in the glove box as a handy reference for the safe and enjoyable use of your Mazda. Should you
resell the vehicle, leave this manual with it for the next owner.
All specifications and descriptions are accurate at the time of printing. Because improvement is a constant goal at
Mazda, we reserve the right to make changes in specifications at any time without notice and without obligation.
Air Conditioning and the Environment
Your Mazda's genuine air conditioner is filled with a refrigerant that has been found not to damage the earth's
ozone layer. If the air conditioner does not operate properly, consult an Authorized Mazda Dealer.
Perchlorate
Certain components of this vehicle such as [air bag modules, seat belt pretensioners, lithium batteries, ···] may contain Perchlorate Material- - Special handling
may apply for service or vehicle end of life disposal. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
Please be aware that this manual applies to all models, equipment and options. As a result, you may find
some explanations for equipment not installed on your vehicle.
©2015 Mazda Motor Corporation
Aug. 2015 (Print2)
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page4
Friday, July 10 2015 5:25 PM
Black plate (4,1)
How to Use This Manual
We want to help you get the most driving
pleasure from your vehicle. Your owner's
manual, when read from cover to cover,
can do that in many ways.
NOTE
Illustrations complement the words of the
manual to best explain how to enjoy your
Mazda. By reading your manual, you can
find out about the features, important
safety information, and driving under
various road conditions.
The symbol below, located on some parts
of the vehicle, indicates that this manual
contains information related to the part.
Please refer to the manual for a detailed
explanation.
The symbol below in this manual means
“Do not do this” or “Do not let this
happen”.
Index: A good place to start is the Index,
an alphabetical listing of all information
in your manual.
You'll find several WARNINGs,
CAUTIONs, and NOTEs in the manual.
WARNING
A WARNING indicates a situation in
which serious injury or death could
result if the warning is ignored.
CAUTION
A CAUTION indicates a situation in
which bodily injury or damage to
your vehicle, or both, could result if
the caution is ignored.
Form No.8FA7-EA-15G
A NOTE provides information and sometimes
suggests how to make better use of your
vehicle.
Mazda5_8FA7-EA-15G_Edition2 Page5
Friday, July 10 2015 5:25 PM
Black plate (5,1)
Table of Contents
Your Vehicle at a Glance
Interior, exterior views and part identification of your Mazda.
Essential Safety Equipment
Use of safety equipment, including seats, seat belt system, child-restraint
systems and SRS air bags.
Knowing Your Mazda
Explanation of basic operations and controls; opening/closing and adjustment
of various parts.
Before Driving Your Mazda
Important information about driving your Mazda.
Driving Your Mazda
Explanation of instruments and controls.
Interior Comfort
Use of various features for drive comfort, including air-conditioning and audio
system.
In Case of an Emergency
Helpful information on what to do in an emergency.
Maintenance and Care
How to keep your Mazda in top condition.
Customer Information and Reporting Safety Defects
Important consumer information including warranties and add-on equipment.
Specifications
Technical information about your Mazda.
Index
Form No.8FA7-EA-15G
1
2
3
4
5
6
7
8
9
10
11
Mazda5_8FA7-EA-15G_Edition2 Page6
Friday, July 10 2015 5:25 PM
Form No.8FA7-EA-15G
Black plate (6,1)
Mazda5_8FA7-EA-15G_Edition2 Page7
Friday, July 10 2015 5:25 PM
1
Black plate (7,1)
Your Vehicle at a Glance
Interior, exterior views and part identification of your Mazda.
Interior Overview ..........................................................................
Interior Equipment (View A) ....................................................
Interior Equipment (View B) ....................................................
Interior Equipment (View C) ....................................................
1-2
1-2
1-3
1-4
Exterior Overview ......................................................................... 1-5
Front .......................................................................................... 1-5
Rear ........................................................................................... 1-6
1-1
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page8
Friday, July 10 2015 5:25 PM
Black plate (8,1)
Your Vehicle at a Glance
Interior Overview
Interior Equipment (View A)
Door-lock knob .................................................................................................. page 3-10
Power door lock switch ..................................................................................... page 3-11
DSC OFF switch ............................................................................................... page 5-26
Lighting control ................................................................................................. page 5-59
Turn and lane-change signal .............................................................................. page 5-63
Dashboard illumination knob ............................................................................ page 5-43
Instrument cluster .............................................................................................. page 5-40
Wiper and washer lever ..................................................................................... page 5-64
Lock release lever .............................................................................................. page 3-32
Headlight leveling switch .................................................................................. page 5-62
Outside mirror switch ........................................................................................ page 3-32
Power window switches .................................................................................... page 3-17
Power window lock switch ................................................................................ page 3-19
1-2
The equipment and installation position varies by vehicle
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page9
Friday, July 10 2015 5:25 PM
Black plate (9,1)
Your Vehicle at a Glance
Interior Overview
Interior Equipment (View B)
Audio control switches ...................................................................................... page 6-47
SRS air bags ...................................................................................................... page 2-47
Cruise control switches ...................................................................................... page 5-21
Climate control system ........................................................................................ page 6-2
Hazard warning flasher switch .......................................................................... page 5-70
Information display ............................................................................................ page 6-95
Audio system ..................................................................................................... page 6-12
Glove compartment ......................................................................................... page 6-104
Accessory socket ............................................................................................. page 6-109
Manual transaxle shift lever ............................................................................... page 5-10
Automatic transaxle selector lever ..................................................................... page 5-12
Ignition switch ..................................................................................................... page 5-2
Hood release handle .......................................................................................... page 3-21
The equipment and installation position varies by vehicle
Form No.8FA7-EA-15G
1-3
Mazda5_8FA7-EA-15G_Edition2 Page10
Friday, July 10 2015 5:25 PM
Black plate (10,1)
Your Vehicle at a Glance
Interior Overview
Interior Equipment (View C)
Seat belts ............................................................................................................ page 2-19
SRS air bags ...................................................................................................... page 2-47
Remote fuel-filler lid release ............................................................................. page 3-20
Bottle holder .................................................................................................... page 6-101
Vanity mirror ...................................................................................................... page 6-93
Overhead light ................................................................................................... page 6-94
Rearview mirror ................................................................................................. page 3-33
Sunvisor ............................................................................................................. page 6-93
Parking brake ....................................................................................................... page 5-6
Seat warmer switches ........................................................................................ page 2-17
Front seat ............................................................................................................. page 2-2
Cup holders ...................................................................................................... page 6-100
Rear ventilation system ....................................................................................... page 6-9
Second-row seat ................................................................................................... page 2-5
Third-row seat ................................................................................................... page 2-10
1-4
The equipment and installation position varies by vehicle
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page11
Friday, July 10 2015 5:25 PM
Black plate (11,1)
Your Vehicle at a Glance
Exterior Overview
Front
Hood .................................................................................................................. page 3-21
Windshield wiper blades .................................................................................... page 8-19
Moonroof ........................................................................................................... page 3-23
Outside mirror .................................................................................................... page 3-32
Child safety locks .............................................................................................. page 3-13
Tires ................................................................................................................... page 8-27
Light bulbs ......................................................................................................... page 8-34
The equipment and installation position varies by vehicle
Form No.8FA7-EA-15G
1-5
Mazda5_8FA7-EA-15G_Edition2 Page12
Friday, July 10 2015 5:25 PM
Black plate (12,1)
Your Vehicle at a Glance
Exterior Overview
Rear
Rear wiper blade ................................................................................................ page 8-20
Liftgate .............................................................................................................. page 3-14
Antenna .............................................................................................................. page 6-11
Sliding doors ...................................................................................................... page 3-12
Door lock ........................................................................................................... page 3-10
Tires ................................................................................................................... page 8-27
Fuel-filler lid ...................................................................................................... page 3-20
Light bulbs ......................................................................................................... page 8-34
1-6
The equipment and installation position varies by vehicle
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page13
Friday, July 10 2015 5:25 PM
2
Black plate (13,1)
Essential Safety Equipment
Use of safety equipment, including seats, seat belt system, child-restraint
systems and SRS air bags.
Seats ............................................................................................... 2-2
Front Seats ................................................................................ 2-2
Second-Row Seats .................................................................... 2-5
Third-Row Seat ....................................................................... 2-10
Seat Arrangements .................................................................. 2-13
Head Restraints ....................................................................... 2-15
Seat Warmer í ......................................................................... 2-17
Seat Belt Systems ........................................................................
Seat Belt Precautions ..............................................................
Seat Belt ..................................................................................
Front Seat Belt Pretensioner and Load Limiting Systems .......
Seat Belt Extender ...................................................................
Seat Belt Warning Light ..........................................................
Seat Belt Reminder .................................................................
2-19
2-19
2-23
2-25
2-28
2-29
2-30
Child Restraint ............................................................................
Child Restraint Precautions .....................................................
Child-Restraint System Installation Position ..........................
Installing Child-Restraint Systems ..........................................
LATCH Child-Restraint Systems ............................................
2-31
2-31
2-36
2-37
2-44
SRS Air Bags ...............................................................................
Supplemental Restraint System (SRS) Precautions ................
Supplemental Restraint System Components .........................
How the SRS Air Bags Work ..................................................
SRS Air Bag Deployment Criteria ..........................................
Limitations to SRS Air Bag ....................................................
Driver and Front Passenger Occupant Classification
System í ..................................................................................
Monitoring and Maintenance ..................................................
2-47
2-47
2-53
2-55
2-59
2-60
í
Some models.
Form No.8FA7-EA-15G
2-62
2-67
2-1
Mazda5_8FA7-EA-15G_Edition2 Page14
Friday, July 10 2015 5:25 PM
Black plate (14,1)
Essential Safety Equipment
Seats
Front Seats
WARNING
Do not modify or replace the front
seats:
Modifying or replacing the front seats
such as replacing the upholstery or
loosening any bolts is dangerous. The
front seats contain air bag
components essential to the
supplemental restraint system. Such
modifications could damage the
supplemental restraint system and
result in serious injury. Consult an
Authorized Mazda Dealer if there is
any need to remove or reinstall the
front seats.
Do not drive with damaged front seats:
Driving with damaged front seats,
such as seat cushions torn or
damaged down to the urethane, is
dangerous. A collision, even one not
strong enough to inflate the air bags,
could damage the front seats which
contain essential air bag
components. If there was a
subsequent collision, an air bag may
not deploy which could lead to
injuries. Always have an Authorized
Mazda Dealer inspect the front seats,
front seat belt pretensioners and air
bags after a collision.
2-2
Form No.8FA7-EA-15G
Make sure the adjustable components
of a seat are locked in place:
Adjustable seats and seatbacks that
are not securely locked are
dangerous. In a sudden stop or
collision, the seat or seatback could
move, causing injury. Make sure the
adjustable components of the seat
are locked in place by attempting to
slide the seat forward and backward
and rocking the seatback.
Never allow children to adjust a seat:
Allowing children to adjust a seat is
dangerous as it could result in
serious injury if a child's hands or
feet become caught in the seat.
Adjust the driver's seat only when the
vehicle is stopped:
Adjusting the driver's seat while the
vehicle is moving is dangerous. The
driver could lose control of the vehicle
and have an accident.
CAUTION
Be careful not to place your hands
and fingers around moving parts of
the front seat when adjusting the
seat positions to prevent injury.
Mazda5_8FA7-EA-15G_Edition2 Page15
Friday, July 10 2015 5:25 PM
Black plate (15,1)
Essential Safety Equipment
Seats
qSeat Slide
To move a seat forward or backward, raise
the lever and slide the seat to the desired
position and release the lever.
Make sure the lever returns to its original
position and the seat is locked in place by
attempting to push it forward and
backward.
qSeat Recline
WARNING
Do not drive with either front seat
reclined:
Sitting in a reclined position while the
vehicle is moving is dangerous
because you do not get the full
protection from seat belts. During
sudden braking or a collision, you
can slide under the lap belt and
suffer serious internal injuries. For
maximum protection, sit well back
and upright.
Always sit in the front passenger seat
properly with the seatback upright and
feet on the floor (With Driver and Front
Passenger Occupant Classification
System):
Your front passenger seat has weight
sensors, sitting in the front passenger
seat improperly out of position or
with the seatback reclined too far
while the vehicle is moving is
dangerous as it can take off weight
from the seat bottom and affect the
weight determination of the front
passenger sensing system. As a result
the front passenger will not have the
supplementary protection of the air
bag and seat belt pretensioner, which
could result in serious injury. Always
sit upright against the seatback with
your feet on the floor.
Do not drive with the seatback
unlocked:
All of the seatbacks play an
important role in your protection in a
vehicle. Leaving the seatback
unlocked is dangerous as it can allow
passengers to be ejected or thrown
around and baggage to strike
occupants in a sudden stop or
collision, resulting in severe injury.
After adjusting the seatback at any
time, even when there are no other
passengers, rock the seatback to
make sure it is locked in place.
2-3
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page16
Friday, July 10 2015 5:25 PM
Black plate (16,1)
Essential Safety Equipment
Seats
To change the seatback angle, lean
forward slightly while raising the lever.
Then lean back to the desired position and
release the lever.
qHeight Adjustment (Driver's Seat)
Make sure the lever returns to its original
position and the seatback is locked in
place by attempting to push it forward and
backward.
qLumbar Support Adjustment
(Driver's Seat) í
CAUTION
When returning a rear-reclined
seatback to its upright position,
make sure you hold onto the
seatback with your other hand while
operating the lever. If the seatback is
not supported, it will flip forward
suddenly and could cause injury.
2-4
í
Some models.
Form No.8FA7-EA-15G
To adjust the seat height, move the lever
up or down.
Move the lever forwards to adjust the
lumbar support as required.
Mazda5_8FA7-EA-15G_Edition2 Page17
Friday, July 10 2015 5:25 PM
Black plate (17,1)
Essential Safety Equipment
Seats
qArmrest
The armrest can be used or placed upright.
Second-Row Seats
WARNING
Do not stack cargo higher than the
seatbacks:
Stacking luggage or other cargo
higher than the seatbacks is
dangerous. During a sudden stop or
collision, objects can fly around and
become projectiles that could hit and
injure passengers.
WARNING
Never position the shoulder portion of
a front seat belt over the armrest:
Positioning the shoulder portion of a
front seat belt over the armrest is
dangerous as it cannot provide
adequate protection in a collision
and could result in serious injuries.
Never put your hands and fingers
around the moving parts of the seat
and armrest:
Putting your hands and fingers
around the moving parts of the seat
and armrest is dangerous as they
could get injured.
Make sure luggage and cargo are
secured before driving:
Not securing cargo while driving is
dangerous as it could move or be
crushed during sudden braking or a
collision and cause injury.
Make sure the adjustable components
of a seat are locked in place by
attempting to slide the seat forward
and backward and rocking the
seatback:
Adjustable seats that are not securely
latched are dangerous. In a sudden
stop or collision, the seat or seatback
could move, causing injury.
Never allow children to adjust a seat:
Allowing children to adjust a seat is
dangerous as it could result in
serious injury if a child's hands or
feet become caught in the seat.
Adjust the seat only when the vehicle is
stopped:
Adjusting the seat while the vehicle is
moving is dangerous. Sudden
braking or a collision could cause
serious injury.
2-5
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page18
Friday, July 10 2015 5:25 PM
Black plate (18,1)
Essential Safety Equipment
Seats
Do not drive with the seatback
unlocked:
All of the seatbacks play an
important role in your protection in a
vehicle. Leaving the seatback
unlocked is dangerous as it can allow
passengers to be ejected or thrown
around and baggage to strike
occupants in a sudden stop or
collision, resulting in severe injury.
After adjusting the seatback at any
time, even when there are no other
passengers, rock the seatback to
make sure it is locked in place.
Never allow a passenger to sit or stand
on the folded seatback while the
vehicle is moving:
Driving with a passenger on the
folded seatback is dangerous.
Allowing a child to sit up on the
folded seatback while the vehicle is
moving is particularly dangerous. In
a sudden stop or even a minor
collision, a child not in a proper seat
or child-restraint system and seat
belt could be thrown forward, back
or even out of the vehicle resulting in
serious injuries or death. The child in
the baggage area could be thrown
into other occupants and cause
serious injury.
CAUTION
Be careful not to place your hands
and fingers around moving parts of
the second-row seat when adjusting
the seat positions to prevent injury.
NOTE
The second-row seats cannot be removed.
2-6
Form No.8FA7-EA-15G
qSeat Slide
To move the seat forward or backward,
raise the lever and slide the seat to the
desired position and release the lever.
Make sure the lever returns to its original
position and the seat is locked in place by
attempting to push it forward and
backward.
Mazda5_8FA7-EA-15G_Edition2 Page19
Friday, July 10 2015 5:25 PM
Black plate (19,1)
Essential Safety Equipment
Seats
qSeat Recline
WARNING
Do not drive with the seats reclined:
Sitting in a reclined position while the
vehicle is moving is dangerous
because you do not get the full
protection from the seat belts. During
sudden braking or a collision, you
can slide under the lap belt and
suffer serious internal injuries. For
maximum protection, sit well back
and upright.
CAUTION
When returning a rear-reclined
seatback to its upright position,
make sure you hold onto the
seatback with your other hand while
operating the lever. If the seatback is
not supported, it will flip forward
suddenly and could cause injury.
qArmrest
The armrest can be used or placed upright.
Do not recline a second-row seatback
when the third row seat is occupied:
Reclining the second-row seatback
when the third-row seat is occupied
is dangerous.Because the clearance
in the third-row seat is limited,
occupants in the third-row seat could
be hurt seriously on a reclined
second-row seatback.
To change the seatback angle, lean
forward slightly while raising the lever.
Then lean back to the desired position and
release the lever.
Make sure the lever returns to its original
position and the seatback is locked in
place by attempting to push it forward and
backward.
WARNING
Never position the shoulder portion of
a second-row seat belt over the
armrest:
Positioning the shoulder portion of a
second-row seat belt over the
armrest is dangerous as it cannot
provide adequate protection in a
collision and could result in serious
injuries.
Never put your hands and fingers
around the moving parts of the seat
and armrest:
Putting your hands and fingers
around the moving parts of the seat
and armrest is dangerous as they
could get injured.
2-7
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page20
Friday, July 10 2015 5:25 PM
Black plate (20,1)
Essential Safety Equipment
Seats
qThird-Row Seat Access
After folding the second-row seat
seatback and sliding the seat forward, you
can access the third-row seat easily.
Entering/exiting the third-row seat area
Raise the lever on the side of the secondrow seat or pull the strap behind the
second-row seat to fold the seatback
forward and slide the seat forward.
CAUTION
Ø When folding a seatback, always
hold onto the seatback with your
other hand while operating the
lever. If the seatback is not
supported, it will flip forward
suddenly and could cause injury.
Ø After entering/exiting the thirdrow seat area, return the seatback
to its upright position. Otherwise,
it could move unexpectedly and
cause injury.
qFolding the Second-Row Seats
To create a flat luggage compartment
space, lift the seat-bottoms of the secondrow seats and fold the seatbacks forward.
Folding the seatbacks
1. Insert the second-row outboard seat
belts in the retainers.
After entering/exiting the third-row
seat area
Return the second-row seatback to its
upright position and lock it after sliding it
backward. Make sure it is locked by
attempting to lightly move it forward and
backward.
2-8
Form No.8FA7-EA-15G
2. Move the seat all the way back.
3. Fold the head restraint all the way
down (page 2-15).
Mazda5_8FA7-EA-15G_Edition2 Page21
Friday, July 10 2015 5:25 PM
Black plate (21,1)
Essential Safety Equipment
Seats
4. Pull the strap and lift the end of the
seat-bottom up and forward.
5. If the armrest and storage box are in
the position for use, store them.
Refer to Storage Box on page 6-105.
6. Raise the lever and fold the seatback
forward. Make sure the seatback is
secured by attempting to lightly move
it up and down.
CAUTION
Ø When folding a seatback, always
hold onto the seatback with your
other hand while operating the
lever. If the seatback is not
supported, it will flip forward
suddenly and could cause injury.
Ø When folding the seatback of the
right second-row seat, make sure
the storage box is stowed. If the
storage box is not stowed, it could
be damaged.
NOTE
To create a flat luggage compartment space
from the rear of the vehicle to the back of the
front seats, fold the second-row and third-row
seats (page 2-11).
2-9
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page22
Friday, July 10 2015 5:25 PM
Black plate (22,1)
Essential Safety Equipment
Seats
Returning seatbacks to their original
positions
1. Return the seatback to its original
position while raising its lever.
Make sure the seatback is secured by
attempting to lightly move it forward
and back.
Third-Row Seat
WARNING
Do not stack cargo higher than the
seatbacks:
Stacking luggage or other cargo
higher than the seatbacks is
dangerous. During a sudden stop or
collision, objects can fly around and
become projectiles that could hit and
injure passengers.
Make sure luggage and cargo are
secured before driving:
Not securing cargo while driving is
dangerous as it could move or be
crushed during sudden braking or a
collision and cause injury.
2. Return the seat-bottom to its original
position and secure it. After returning
the seat-bottom to its original position,
make sure the seat-bottom is secured
by attempting to lightly move it up and
down.
3. Lift the head restraint upward to its
upright position.
2-10
Form No.8FA7-EA-15G
Do not drive with the seatback
unlocked:
All of the seatbacks play an
important role in your protection in a
vehicle. Leaving the seatback
unlocked is dangerous as it can allow
passengers to be ejected or thrown
around and baggage to strike
occupants in a sudden stop or
collision, resulting in severe injury.
After returning the seatback at any
time, even when there are no other
passengers, rock the seatback to
make sure it is locked in place.
Mazda5_8FA7-EA-15G_Edition2 Page23
Friday, July 10 2015 5:25 PM
Black plate (23,1)
Essential Safety Equipment
Seats
Never allow a passenger to sit or stand
on the folded seatback while the
vehicle is moving:
Driving with a passenger on the
folded seatback is dangerous.
Allowing a child to sit up on the
folded seatback while the vehicle is
moving is particularly dangerous. In
a sudden stop or even a minor
collision, a child not in a proper seat
or child-restraint system and seat
belt could be thrown forward, back
or even out of the vehicle resulting in
serious injuries or death. The child in
the baggage area could be thrown
into other occupants and cause
serious injury.
NOTE
The third-row seat cannot be removed.
qFolding the Third-Row Seat
To create a flat luggage compartment
space, fold the seatbacks forward.
To fold third-row seat
3. Lower the head restraints all the way
down (page 2-15).
4. Pull the strap and fold the seatback
forward.
5. Lock the seatback in place by pushing
it down. Make sure the seatback is
secured by attempting to lightly move
it up and down.
NOTE
To create a flat luggage compartment space
from the rear of the vehicle to the back of the
front seats, fold the second-row and third-row
seats (page 2-8).
1. Slide the second-row seat all the way
forward.
2. Insert the third-row outboard seat belts
in the retainers.
To return third-row seat to its original
position
Return the seatback to its original position
while pulling its strap.
2-11
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page24
Friday, July 10 2015 5:25 PM
Essential Safety Equipment
Seats
Make sure the seatback is secured by
attempting to lightly move it forward and
back.
2-12
Form No.8FA7-EA-15G
Black plate (24,1)
Mazda5_8FA7-EA-15G_Edition2 Page25
Friday, July 10 2015 5:25 PM
Black plate (25,1)
Essential Safety Equipment
Seats
Seat Arrangements
Illustrations are of representative seat arrangements.
WARNING
Do not arrange the seats while driving:
Arranging the seats while driving is dangerous because you do not get the full
protection from seat belts and you cannot keep your balance. During sudden
braking or a collision, it could cause serious injuries.
Do not ride on seatbacks that are folded flat:
Sitting or lying on seats that are folded flat is a dangerous way to ride. During
sudden braking or a collision you could be thrown around inside the vehicle and
seriously injured.
Make sure the adjustable components of a seat are locked in place:
Adjustable seats that are not securely locked are dangerous. In a sudden stop or
collision, the seat or seatback could move, causing injury.
2-13
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page26
Friday, July 10 2015 5:25 PM
Black plate (26,1)
Essential Safety Equipment
Seats
CAUTION
Ø Be careful not to place your hands and fingers around moving parts of the seat
when arranging the seat to prevent injury.
Ø Do not move around in the vehicle while the seats are folded down. A foot could
be injured if it becomes pinched between the seat bottom and seatback. If you
have to move around the folded down seats, step on the center of the seats and
move carefully.
qHow to arrange the seats
Slide the second-row seats (driver side/
passenger side) all the way back.
Refer to Seat Slide on page 2-6.
Fold the third-row seats.
Refer to Folding the Third-Row Seat on
page 2-11.
To return the seats to their road positions,
reverse the procedures above.
/
1. Fold the third-row seats.
Refer to Folding the Third-Row Seat
on page 2-11.
2-14
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page27
Friday, July 10 2015 5:25 PM
Black plate (27,1)
Essential Safety Equipment
Seats
2. Fold the second-row seats.
Refer to Folding the Second-Row Seats
on page 2-8.
To return the seats to their road positions,
reverse the procedures above.
Head Restraints
Your vehicle is equipped with head
restraints on all outboard seats. The head
restraints are intended to help protect you
and the passengers from neck injury.
WARNING
Always drive with the head restraints
installed when seats are being used
and make sure they are properly
adjusted. In addition, always raise the
head restraints mentioned below when
they are being used:
Driving with the head restraints
adjusted too low or removed is
dangerous. With no support behind
your head, your neck could be
seriously injured in a collision.
(Head restraints which must be
raised for use)
All third-row seat head restraints
2-15
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page28
Friday, July 10 2015 5:25 PM
Black plate (28,1)
Essential Safety Equipment
Seats
qNormal Head Restraints
Third-Row outboard seat
Height adjustment
To raise a head restraint, pull it up to the
desired position.
To lower the head restraint, press the stopcatch release, then push the head restraint
down.
Adjust the head restraint so that the center
is even with the top of the passenger's
ears.
Removal/Installation
To remove the head restraint, pull it up
while pressing the stop-catch.
To install the head restraint, insert the legs
into the holes while pressing the stopcatch.
WARNING
Front outboard seat
Always drive with the head restraints
set up when seats are being used and
make sure they are properly set up:
Driving with the head restraints not
set up is dangerous. With no support
behind your head, your neck could be
seriously injured in a collision.
qFoldable Head Restraints
The second-row seats are equipped with
foldable head restraints.
NOTE
The foldable head restraints cannot be
adjusted or removed.
2-16
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page29
Friday, July 10 2015 5:25 PM
Black plate (29,1)
Essential Safety Equipment
Seats
To fold the head restraint, pull the strap
and fold the head restraint downward. To
return the head restraint to its upright
position, lift it upward.
Seat Warmer í
The front seats are electrically heated. The
ignition must be switched ON.
Press the switch to turn the seat warmer
on or off. When the switch is in the ON
position, the indicator light will come on.
OFF
ON
WARNING
Always drive with the head restraints in
their upright positions when the
second-row seats are occupied, and
make sure they are securely locked in
place:
Driving with the head restraints
folded down is dangerous. With no
support behind your head, your neck
could be seriously injured in a
collision.
í
Some models.
Form No.8FA7-EA-15G
2-17
Mazda5_8FA7-EA-15G_Edition2 Page30
Friday, July 10 2015 5:25 PM
Black plate (30,1)
Essential Safety Equipment
Seats
WARNING
Ø Be careful when using the seat
warmer. The heat from the seat
warmer may be too hot for some
people, as indicated below, and
could cause a low-temperature
burn.
Ø Infants, small babies, elderly
people, and physically
challenged people
Ø People with delicate skin
Ø People who are excessively
fatigued
Ø People who are intoxicated
Ø People who have taken sleepinducing medicine such as
sleeping pills or cold medicine
Ø Do not use the seat warmer with
anything having high moistureretention ability such as a blanket
or cushion on the seat. The seat
may be heated excessively and
cause a low-temperature burn.
Ø Do not use the seat warmer even
when taking a short nap in the
vehicle. The seat may be heated
excessively and cause a lowtemperature burn.
Ø Do not place heavy objects with
sharp projections on the seat, or
insert needles or pins into it. This
could cause the seat to become
excessively heated and result in
injury from a minor burn.
CAUTION
Do not use organic solvents to clean
the seat. It may damage the seat
surface and the heater.
2-18
Form No.8FA7-EA-15G
NOTE
l
l
Use the seat warmer when the engine is
running, and do not continue to use it for a
long period of time.
The temperature of the seat warmer cannot
be adjusted because the seat warmer is
controlled by a thermostat.
Mazda5_8FA7-EA-15G_Edition2 Page31
Friday, July 10 2015 5:25 PM
Black plate (31,1)
Essential Safety Equipment
Seat Belt Systems
Seat Belt Precautions
Seat belts help to decrease the possibility of severe injury during accidents and sudden
stops. Mazda recommends that the driver and all passengers always wear seat belts.
Your vehicle has the following types of seat belts.
With Driver and Front Passenger Occupant Classification System model
Seating Position
Driver side
Front seat
Passenger side
Second-row seat
Third-row seat
Types of seat belt
3-point type seat belt with emergency locking mode retractor
3-point type seat belt with emergency locking mode
retractor/automatic locking mode retractor
Except above
Seating Position
Driver side
Front seat
Passenger side
Second-row seat
Third-row seat
Types of seat belt
3-point type seat belt with emergency looking mode retractor
3-point type seat belt with emergency looking mode
retractor/automatic locking mode retractor
3-point type seat belt with emergency locking mode retractor
This belt has retractors with an inertia lock that keep the belt retracted when not in use.
The lock allows the belt to remain comfortable on the user, but it will lock in position
during a collision.
Refer to Emergency Locking Mode on page 2-21.
3-point type seat belt with emergency locking mode retractor/automatic locking mode
retractor
In addition to the emergency locking mode function, this belt has retractors that operate in
another mode, the automatic locking mode, for the child-restraint system.
Refer to Automatic Locking Mode on page 2-22.
Refer to Installing Child-Restraint Systems on page 2-37.
We recommend you put all children in the rear seats, if you must use the front passenger
seat for a child, slide the front passenger seat as far back as possible and make sure any
child-restraint system is secured properly.
2-19
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page32
Friday, July 10 2015 5:25 PM
Black plate (32,1)
Essential Safety Equipment
Seat Belt Systems
WARNING
Always wear your seat belt and make sure all occupants are properly restrained:
Not wearing a seat belt is extremely dangerous. During a collision, occupants not
wearing seat belts could hit someone or things inside the vehicle or even be thrown
out of the vehicle. They could be seriously injured or even killed. In the same
collision, occupants wearing seat belts would be much safer.
Do not wear twisted seat belts:
Twisted seat belts are dangerous. In a collision, the full width of the belt is not
available to absorb the impact. This puts more force on the bones beneath the belt,
which could cause serious injury or death. So, if your seat belt is twisted, you must
straighten the seat belt to remove any twists and to allow the full width of the belt to
be used.
Never use one seat belt on more than one person at a time:
Using one seat belt for more than one person at a time is dangerous. A seat belt
used in this way cannot spread the impact forces properly and the two passengers
could be crushed together and seriously injured or even killed. Never use one belt for
more than one person at a time and always operate the vehicle with each occupant
properly restrained.
Do not operate a vehicle with a damaged seat belt:
Using a damaged seat belt is dangerous. An accident could damage the belt
webbing of the seat belt in use. A damaged seat belt cannot provide adequate
protection in a collision. Have an Authorized Mazda Dealer inspect all seat belt
systems in use during an accident before they are used again.
Have your seat belts changed immediately if the pretensioner or load limiter has
been expended:
Always have an Authorized Mazda Dealer immediately inspect the front seat belt
pretensioners and air bags after any collision. Like the air bags, the front seat belt
pretensioners and load limiters will only function once and must be replaced after
any collision that caused them to deploy. A seat belt with an expended pretensioner
or load limiter is still better than wearing no seat belt at all; however, if the front
seat belt pretensioners and load limiters are not replaced, the risk of injury in a
collision will increase.
2-20
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page33
Friday, July 10 2015 5:25 PM
Black plate (33,1)
Essential Safety Equipment
Seat Belt Systems
CAUTION
Belt retraction may become difficult if the belts and rings are soiled, so try to keep
them clean. For more details about cleaning the seat belts, refer to “Cleaning the
Lap/Shoulder Belt Webbing” (page 8-57).
qPregnant Women and Persons with Serious Medical Conditions
Pregnant women should always wear seat belts. Ask your doctor for specific
recommendations.
The lap belt should be worn SNUGLY AND AS LOW AS POSSIBLE OVER THE HIPS.
The shoulder belt should be worn across your shoulder properly, but never across the
stomach area.
Persons with serious medical conditions also should wear seat belts. Check with your
doctor for any special instructions regarding specific medical conditions.
qEmergency Locking Mode
In the emergency locking mode, the belt remains comfortable on the occupant and the
retractor will lock in position during a collision. When the seat belt is fastened, it will
always be in the emergency locking mode until it is switched to automatic locking mode by
pulling it all the way out to its full length. If the belt feels tight and hinders comfortable
movement while the vehicle is stopped or in motion, it may be in the automatic locking
mode because the belt has been pulled too far out. To return the belt to the more
comfortable emergency locking mode, wait until the vehicle has stopped in a safe, level
area, retract the belt fully to convert it back to emergency locking mode and then extend it
around you again.
If the belt is locked and cannot be pulled out, retract the belt once, and then try pulling it
out slowly. If this fails, pull the belt strongly one time and loosen, then pull it out again
slowly.
2-21
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page34
Friday, July 10 2015 5:25 PM
Black plate (34,1)
Essential Safety Equipment
Seat Belt Systems
qAutomatic Locking Mode
Always use the automatic locking mode to keep the child-restraint system from shifting to
an unsafe position in the event of an accident. To enable seat belt automatic locking mode,
pull it all the way out and connect it as instructed on the child-restraint system. It will
retract down to the child-restraint system and stay locked on it. See the section on child
restraint (page 2-31).
2-22
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page35
Friday, July 10 2015 5:25 PM
Black plate (35,1)
Essential Safety Equipment
Seat Belt Systems
WARNING
Seat Belt
qFastening the Seat Belt
1. Grasp the seat belt tongue.
2. Slowly pull out the lap/shoulder belt.
Belt
Tongue
3. Insert the seat belt tongue into the seat
belt buckle until you hear a click
sound.
Positioning the Shoulder Portion of the
Seat Belt:
Improper positioning of the shoulder
portion of the seat belt is dangerous.
Always make sure the shoulder
portion of the seat belt is positioned
across your shoulder and near your
neck, but never under your arm, on
your neck, or on your upper arm.
4. Position the lap belt as low as possible,
not on the abdominal area, then adjust
the shoulder belt so that it fits snugly
against your body.
Take up slack
Keep low on
hip bone
Too high
Seat belt tongue
WARNING
Seat belt
buckle
Positioning the Lap Portion of the Seat
Belt:
The lap portion of the seat belt worn
too high is dangerous. In a collision,
this would concentrate the impact
force directly on the abdominal area,
causing serious injury. Wear the lap
portion of the belt snugly and as low
as possible.
2-23
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page36
Friday, July 10 2015 5:25 PM
Black plate (36,1)
Essential Safety Equipment
Seat Belt Systems
qUnfastening the Seat Belt
qFront Shoulder Belt Adjuster
Depress the button on the seat belt buckle.
If the belt does not fully retract, pull it out
and check for kinks or twists. Then make
sure it remains untwisted as it retracts.
Adjust the height of the shoulder belt if
the seat belt touches your neck, or if it
crosses your arm instead of your shoulder.
To raise the shoulder belt adjuster, push
the adjuster up. To lower the shoulder belt
adjuster, pull the adjuster and slide it
down. Make sure the adjuster is locked.
To raise
To lower
Button
NOTE
If a belt does not fully retract, inspect it for
kinks and twists. If it is still not retracting
properly, have it inspected at an Authorized
Mazda Dealer.
To secure the outboard-rear row seat belts
when not in use, insert the belts into their
seat belt retainers.
Seat belt
retainer
2-24
Form No.8FA7-EA-15G
WARNING
Positioning the Shoulder Portion of the
Seat Belt:
Improper positioning of the shoulder
portion of the seat belt is dangerous.
Always make sure the shoulder
portion of the seat belt is positioned
across your shoulder and near your
neck, but never under your arm, on
your neck, or on your upper arm.
Mazda5_8FA7-EA-15G_Edition2 Page37
Friday, July 10 2015 5:25 PM
Black plate (37,1)
Essential Safety Equipment
Seat Belt Systems
Front Seat Belt Pretensioner
and Load Limiting Systems
For optimum protection, the driver and
front passenger seat belts are equipped
with pretensioner and load limiting
systems. For both these systems to work
properly you must wear the seat belt
properly.
Pretensioners:
In moderate or severe frontal or nearfrontal accidents, the front air bag and
pretensioner systems deploy
simultaneously. The front seat belt
retractors remove slack quickly as the air
bags are expanding. Any time the air bags
and front seat belt pretensioners have
deployed they must be replaced.
During a side collision, the side air bag,
curtain air bag, and pretensioner system
operate simultaneously on the side in
which the collision occurs.
(With Driver and Front Passenger
Occupant Classification System)
In addition, the pretensioner system for
the front passenger, like the front and side
passenger air bag, is designed to only
deploy in accordance with the total seated
weight on the front passenger seat.
For details, refer to the front passenger
seat weight sensors (page 2-62).
Load limiter:
The load limiting system releases belt
webbing in a controlled manner to reduce
belt force on the occupant's chest. While
the most severe load on a seat belt occurs
in frontal collisions, the load limiter has
an automatic mechanical function and can
activate in any accident mode with
sufficient occupant movement.
Even if the pretensioners have not
deployed, the load limiting function must
be checked by an Authorized Mazda
Dealer after any collision.
WARNING
Wear seat belts only as recommended
in this owner's manual:
Incorrect positioning of the driver and
front passenger seat belts is
dangerous. Without proper
positioning, the pretensioner and
load limiting systems cannot provide
adequate protection in an accident
and this could result in serious injury.
For more details about wearing seat
belts, refer to “Fastening the seat
belts” (page 2-23).
2-25
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page38
Friday, July 10 2015 5:25 PM
Black plate (38,1)
Essential Safety Equipment
Seat Belt Systems
Have your seat belts changed
immediately if the pretensioner or load
limiter has been expended:
Always have an Authorized Mazda
Dealer immediately inspect the front
seat belt pretensioners and air bags
after any collision. Like the air bags,
the front seat belt pretensioners and
load limiters will only function once
and must be replaced after any
collision that caused them to deploy.
A seat belt with an expended
pretensioner or load limiter is still
better than wearing no seat belt at
all; however, if the front seat belt
pretensioners and load limiters are
not replaced, the risk of injury in a
collision will increase.
Do not modify the components or
wiring, or use electronic testing devices
on the pretensioner system:
Modifying the components or wiring
of the pretensioner system, including
the use of electronic testing devices is
dangerous. You could accidentally
activate it or make it inoperable
which would prevent it from
activating in an accident. The
occupants or repairers could be
seriously injured.
Properly dispose of the pretensioner
system:
Improper disposal of the pretensioner
system or a vehicle with nondeactivated pretensioners is
dangerous. Unless all safety
procedures are followed, injury could
result. Ask an Authorized Mazda
Dealer how to safely dispose of the
pretensioner system or how to scrap
a pretensioner-equipped vehicle.
2-26
Form No.8FA7-EA-15G
NOTE
l
l
The pretensioner system will activate in a
moderate or greater frontal or near-frontal,
or a severe side collision. It will not
activate in most rollovers, rear impacts.
(With Driver and Front Passenger
Occupant Classification System)
In addition, the pretensioner system for the
front passenger is designed to only deploy
in accordance with the total seated weight
on the front passenger seat.
Some smoke (non-toxic gas) will be
released when the air bags and
pretensioners deploy. This does not indicate
a fire. This gas normally has no effect on
occupants, however, those with sensitive
skin may experience light skin irritation. If
residue from the deployment of the air bags
or the front pretensioner system gets on the
skin or in the eyes, wash it off as soon as
possible.
qAir Bag/Front Seat Belt
Pretensioner System Warning Light
If the air bag/front seat belt pretensioner
system is working properly, the warning
light illuminates when the ignition is
switched ON or after the engine is
cranked. The warning light turns off after
a specified period of time.
Mazda5_8FA7-EA-15G_Edition2 Page39
Friday, July 10 2015 5:25 PM
Black plate (39,1)
Essential Safety Equipment
Seat Belt Systems
A system malfunction is indicated if the
warning light constantly flashes,
constantly illuminates or does not
illuminate at all when the ignition is
switched ON. If any of these occur,
consult an Authorized Mazda Dealer as
soon as possible. The system may not
operate in an accident.
WARNING
Never tamper with the air bag/
pretensioner systems and always have
an Authorized Mazda Dealer perform
all servicing and repairs:
Self-servicing or tampering with the
systems is dangerous. An air bag/
pretensioner could accidentally
activate or become disabled causing
serious injury or death.
WARNING
Do not drive the vehicle with the air
bag/front seat belt pretensioner system
warning beep sounding:
Driving the vehicle with the air bag/
front seat belt pretensioner system
warning beep sounding is dangerous.
In a collision, the air bags and the
front seat belt pretensioner system
will not deploy and this could result
in death or serious injury.
Contact an Authorized Mazda Dealer
to have the vehicle inspected as soon
as possible.
qAir Bag/Front Seat Belt
Pretensioner System Warning Beep
If a malfunction is detected in the air bag/
front seat belt pretensioner systems and
the warning light, a warning beep sound
will be heard for about 5 seconds every
minute.
The air bag and seat belt pretensioner
system warning beep sound will continue
to be heard for approximately 35 minutes.
Have your vehicle inspected at an
Authorized Mazda Dealer as soon as
possible.
2-27
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page40
Friday, July 10 2015 5:25 PM
Black plate (40,1)
Essential Safety Equipment
Seat Belt Systems
Seat Belt Extender
If your seat belt is not long enough, even
when fully extended, a seat belt extender
may be available to you at no charge from
your Authorized Mazda Dealer.
This extender will be only for you and for
the particular vehicle and seat. Even if it
plugs into other seat belts, it may not hold
in the critical moment of a crash.
When ordering an extender, only order
one that provides the necessary additional
length to fasten the seat belt properly.
Please contact your Authorized Mazda
Dealer for more information.
WARNING
Do not use a seat belt extender unless
it is necessary:
Using a seat belt extender when not
necessary is dangerous. The seat belt
will be too long and not fit properly.
In an accident, the seat belt will not
provide adequate protection and you
could be seriously injured. Only use
the extender when it is required to
fasten the seat belt properly.
2-28
Form No.8FA7-EA-15G
Do not use an improper extender:
Using a seat belt extender that is for
another person or a different vehicle
or seat is dangerous. The seat belt
will not provide adequate protection
and the user could be seriously
injured in an accident. Only use the
extender provided for you and for the
particular vehicle and seat. NEVER
use the extender in a different vehicle
or seat. If you sell your Mazda, do
not leave your seat belt extender in
the vehicle. It could be used
accidentally by the new owner of the
vehicle. After removing the seat belt
extender, discard it. Never use the
seat belt extender in any other
vehicle you may own in the future.
Do not use an extender that is too
long:
Using an extender that is too long is
dangerous. The seat belt will not fit
properly. In an accident, the seat belt
will not provide adequate protection
and you could be seriously injured.
Do not use the extender or choose
one shorter in length if the distance
between the extender's buckle and
the center of the user's body is less
than 15 cm (6 in).
Mazda5_8FA7-EA-15G_Edition2 Page41
Friday, July 10 2015 5:25 PM
Black plate (41,1)
Essential Safety Equipment
Seat Belt Systems
Do not leave a seat belt extender
connected to the buckle:
Leaving a seat belt extender
connected to the buckle without
using the seat belt is dangerous.
When the seat belt extender is
connected to the driver's seat belt
buckle (or front passenger) seat, the
SRS driver's (or front passenger's) air
bag system will determine that the
driver (or front passenger) is wearing
the seat belt even if the driver (or
front passenger) is not wearing it.
This condition could cause the
driver's (or front passenger's) air bag
to not activate correctly and result in
death or serious injury in the event of
collision. Always wear the seat belt
with the seat belt extender.
Do not use the seat belt extender when
installing a child-restraint system on
the front or rear passenger seat:
Using a seat belt extender to fasten a
child-restraint system on any seat is
dangerous. Always follow the childrestraint system manufacturer's
installation instructions and never
use a seat belt extender.
Seat Belt Warning Light
With warning light for front
passenger's seat
The seat belt warning light illuminates if
the driver or front passenger's seat is
occupied and the seat belt is not fastened
when the ignition switched ON.
Without warning light for front
passenger's seat
The seat belt warning light illuminates if
the driver's seat belt is not fastened when
the ignition switched ON.
NOTE
When not in use, remove the seat belt extender
and store it in the vehicle. If the seat belt
extender is left connected, the seat belt
extender might get damaged as it will not
retract with the rest of the seat belt and can
easily fall out of the door when not in use and
be damaged. In addition, the seat belt warning
light will not illuminate and function properly.
2-29
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page42
Friday, July 10 2015 5:25 PM
Black plate (42,1)
Essential Safety Equipment
Seat Belt Systems
Seat Belt Reminder
If the vehicle is driven with the driver or
front passenger's seat belt unfastened, the
seat belt warning light illuminates and a
warning chime sounds.
NOTE
l
l
NOTE
Some models do not have the seat belt
reminder function for the front passenger's
seat.
If the driver or front passenger's seat belt
is unfastened (only when the front
passenger seat is occupied) and the
vehicle is driven at a speed faster than
about 20 km/h (12 mph), the warning
light will flash and a beep sound will be
heard. After a short time, the warning
light stops flashing, but remains
illuminated, and the beep sound stops.
Until a seat belt is fastened or a given
period of time has elapsed, the beep sound
will not stop even if the vehicle speed
falls below 20 km/h (12 mph).
2-30
Form No.8FA7-EA-15G
l
l
l
The warning light flashes and a beep sound
will be heard for about 6 seconds if the
driver's seat belt is not fastened when the
ignition is switched ON.
If a driver or front passenger's seat belt is
unfastened after the beep sound turns off
(warning light remains illuminated), and
the vehicle speed exceeds 20 km/h (12
mph), the warning light flashes and beep
sound activates again.
Placing items on the front passenger seat
may cause the front passenger seat belt
warning function to operate depending on
the weight of the item.
To allow the front passenger seat weight
sensor to function properly, do not place
and sit on an additional seat cushion on the
front passenger seat. The sensor may not
function properly because the additional
seat cushion could cause sensor
interference.
When a small child sits on the front
passenger seat, it is possible that the
warning light will not operate.
Mazda5_8FA7-EA-15G_Edition2 Page43
Friday, July 10 2015 5:25 PM
Black plate (43,1)
Essential Safety Equipment
Child Restraint
Child Restraint Precautions
Mazda strongly urges the use of child-restraint systems for children small enough to use
them.
You are required by law to use a child-restraint system for children in the U.S. and Canada.
Check your local and state or provincial laws for specific requirements regarding the safety
of children riding in your vehicle.
Whatever child-restraint system you consider, please pick the appropriate one for the age
and size of the child, obey the law and follow the instructions that come with the individual
child-restraint system.
A child who has outgrown child-restraint systems should sit in the rear and use seat belts,
both lap and shoulder. If the shoulder belt crosses the neck or face, move the child closer to
the center of the vehicle.
Statistics confirm that the rear seats are the best place for all children up to 12 years of age,
and more so with a supplemental restraint system (air bags).
A rear-facing child-restraint system should NEVER be used on the front seat with the air
bag system activated. The front passenger's seat is also the least preferred seat for other
child-restraint systems.
(With Driver and Front Passenger Occupant Classification System)
To reduce the chance of injuries caused by deployment of the front passenger air bag, the
front passenger seat weight sensors work as a part of the supplemental restraint system.
This system deactivates the front passenger front and side air bags and also the front
passenger seat belt pretensioner system when the front passenger air bag deactivation
indicator light illuminates.
When an infant or small child sits on the front passenger seat, the system shuts off the front
passenger front and side air bags and seat belt pretensioner system, so make sure the front
passenger air bag deactivation indicator light illuminates.
Even if the front passenger air bag is shut off, Mazda strongly recommends that children be
properly restrained and child-restraint systems of all kinds are properly secured on the rear
seats which are the best place for children.
For more details, refer to “Front passenger seat weight sensors” (page 2-62).
2-31
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page44
Friday, July 10 2015 5:25 PM
Black plate (44,1)
Essential Safety Equipment
Child Restraint
WARNING
Use the correct size child-restraint system:
For effective protection in vehicle accidents and sudden stops, a child must be
properly restrained using a seat belt or child-restraint system depending on age and
size. If not, the child could be seriously injured or even killed in an accident.
Follow the manufacturer's instructions and always keep the child-restraint system
buckled down:
An unsecured child-restraint system is dangerous. In a sudden stop or a collision it
could move causing serious injury or death to the child or other occupants. Make
sure any child-restraint system is properly secured in place according to the childrestraint system manufacturer's instructions. When not in use, remove it from the
vehicle or fasten it with a seat belt, or latch it down to BOTH LATCH lower anchors
for LATCH child-restraint systems and the corresponding tether anchor.
Always secure a child in a proper child-restraint system:
Holding a child in your arms while the vehicle is moving is extremely dangerous. No
matter how strong the person may be, he or she cannot hold onto a child in a
sudden stop or collision and it could result in serious injury or death to the child or
other occupants. Even in a moderate accident, the child may be exposed to air bag
forces that could result in serious injury or death to the child, or the child may be
slammed into an adult, causing injury to both child and adult.
Never use a rear-facing child-restraint system in the front seat with an air bag that
could deploy:
Rear-facing child-restraint systems on the front seat are particularly dangerous even
though you may feel assured that a front passenger air bag will not deploy based on
the fact that the front passenger air bag deactivation indicator light illuminates. The
child-restraint system can be hit by a deploying air bag and moved violently
backward resulting in serious injury or death to the child.
Do not use a rearward facing child restraint on a seat protected by an airbag in front
of it.
2-32
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page45
Friday, July 10 2015 5:25 PM
Black plate (45,1)
Essential Safety Equipment
Child Restraint
Vehicles with a front passenger air bag have a warning label attached as shown
below. The warning label reminds you not to put a rear-facing child-restraint system
on the front passenger seat at any time.
Do not install a front-facing child-restraint system on the front passenger seat unless
it is unavoidable:
In a collision, the force of a deploying air bag could cause serious injury or death to
the child. If installing a front-facing child-restraint system on the front passenger
seat is unavoidable, move the front passenger seat as far back as possible.
2-33
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page46
Friday, July 10 2015 5:25 PM
Black plate (46,1)
Essential Safety Equipment
Child Restraint
Seating a child in a child-restraint system on the front passenger seat is dangerous
under certain conditions (With Driver and Front Passenger Occupant Classification
System):
Your vehicle is equipped with front passenger seat weight sensors. Even with the
front passenger seat weight sensors, if you must use the front passenger seat to seat
a child, using a child-restraint system on the front passenger seat under the
following conditions increases the danger of the front passenger air bag deploying
and could result in serious injury or death to the child.
Ø The front passenger air bag deactivation indicator light does not illuminate when
seating a child in the child-restraint system.
Ø Luggage or other items are placed on the seat with the child in the child-restraint
system.
Ø A rear passenger or luggage pushing or pulling down on the front passenger
seatback.
Ø A rear passenger puts their feet on the front seat rails.
Ø Luggage or other items are placed on the seatback or hung on the head restraint.
Ø Heavy items are placed in the seatback map pocket.
Ø The seat is washed.
Ø Liquids are spilled on the seat.
Ø The front passenger seat is moved backward, pushing into luggage or other items
placed behind it.
Ø The front passenger seatback contacts the second-row seat.
Ø Luggage or other items are placed between the front passenger seat and driver
seat.
Ø Any accessories, which might increase the total seated weight on the front
passenger seat, are attached to the front passenger seat.
The designated positions with seat belts on the rear seats are the safest places for
children. Always use seat belts and child restraints.
Do not allow a child or anyone to lean over or against the side window of a vehicle
with side and curtain air bags:
It is dangerous to allow anyone to lean over or against the side window, the area of
the front passenger seat, the front and rear window pillars and the roof edge along
both sides from which the side and curtain air bags deploy, even if a child-restraint
system is used. The impact of inflation from a side or curtain air bag could cause
serious injury or death to an out of position child. Furthermore, leaning over or
against the front door could block the side and curtain air bags and eliminate the
advantages of supplemental protection. With the front air bag and the additional
side air bag that comes out of the front seat, the rear seat is always a better location
for children. Take special care not to allow a child to lean over or against the side
window, even if the child is seated in a child-restraint system.
2-34
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page47
Friday, July 10 2015 5:25 PM
Black plate (47,1)
Essential Safety Equipment
Child Restraint
Never use one seat belt on more than one person at a time:
Using one seat belt for more than one person at a time is dangerous. A seat belt
used in this way cannot spread the impact forces properly and the two passengers
could be crushed together and seriously injured or even killed. Never use one belt for
more than one person at a time and always operate the vehicle with each occupant
properly restrained.
CAUTION
A seat belt or child-restraint system can become very hot in a closed vehicle during
warm weather. To avoid burning yourself or a child, check them before you or your
child touches them.
NOTE
Your Mazda is equipped with LATCH lower anchors for attachment of specially designed LATCH
child-restraint systems in the rear seats. When using these anchors to secure a child-restraint system,
refer to “LATCH Child-Restraint Systems” (page 2-44).
2-35
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page48
Friday, July 10 2015 5:25 PM
Black plate (48,1)
Essential Safety Equipment
Child Restraint
Child-Restraint System
Installation Position
Child seat
A child seat restrains a child's body using
the harness.
In this owner's manual, explanation of
child-restraint systems is provided for the
following three types of popular childrestraint systems: infant seat, child seat,
booster seat.
NOTE
l
l
Installation position is determined by the
type of child-restraint system. Always read
the manufacturer's instructions and this
owner's manual carefully.
Due to variations in the design of childrestraint systems, vehicle seats and seat
belts, all child-restraint systems may not fit
all seating positions. Before purchasing a
child-restraint system, it should be tested in
the specific vehicle seating position (or
positions) where it is intended to be used. If
a previously purchased child-restraint
system does not fit, you may need to
purchase a different one that will.
Infant seat
An infant seat provides restraint by
bracing the infant's head, neck and back
against the seating surface.
2-36
Form No.8FA7-EA-15G
Booster seat
A booster seat is a child restraint
accessory designed to improve the fit of
the seat belt system around the child's
body.
Mazda5_8FA7-EA-15G_Edition2 Page49
Friday, July 10 2015 5:25 PM
Black plate (49,1)
Essential Safety Equipment
Child Restraint
Installing Child-Restraint
Systems
Accident statistics reveal that a child is
safer in the rear seats. The front
passenger's seat is clearly the worst choice
for any child under 12, and with rearfacing child-restraint systems it is clearly
unsafe due to air bags.
NOTE
Even if your vehicle is equipped with front
passenger seat weight sensors (page 2-62),
which automatically deactivates the front
passenger air bag, a rear seat is the safest
place for a child of any age or size.
Some child-restraint systems now come
with tethers and therefore must be
installed on the seats that take tethers to
be effective. In your Mazda, tethered
child-restraint systems can only be
accommodated in the four positions on
the rear seats.
Some child-restraint systems also employ
specially designed LATCH attachments;
refer to “LATCH Child-Restraint
Systems” (page 2-44).
WARNING
Tethered Child-Restraint Systems Work
Only on Tether-Equipped Rear Seats:
Installation of a tether equipped
child-restraint system in the front
passenger's seat defeats the safety
design of the system and will result in
an increased chance of serious injury
if the child-restraint system goes
forward without benefit of being
tethered.
Place tether equipped child-restraint
systems where there are tether
anchors.
qRear Seats Child-Restraint
System Installation
Follow these instructions when using a
child-restraint system, unless you are
attaching a LATCH-equipped childrestraint system to the rear LATCH lower
anchors. Refer to “LATCH ChildRestraint Systems” (page 2-44).
NOTE
Follow the child-restraint system
manufacturer's instructions carefully. If you
are not sure whether you have a LATCH
system or tether, check in the child-restraint
system manufacturer's instructions and follow
them accordingly. Depending on the type of
child-restraint system, it may use LATCH
system instead of seat belts or if the belt goes
across the child's chest, may recommend
against using automatic locking mode.
1. If the seat in which you install a childrestraint system has a seat slide
function, slide the seat as far back as
possible.
2. Make sure the seatback is securely
latched by pushing it back until it is
fully locked.
2-37
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page50
Friday, July 10 2015 5:25 PM
Black plate (50,1)
Essential Safety Equipment
Child Restraint
3. (Third-row seat)
Raise the head restraint to the top
locked position.
Refer to Head Restraints on page 2-15.
NOTE
(Second-row seat)
The second-row outboard head restraints are
non-adjustable.
6. Push the child-restraint system firmly
into the vehicle seat. Be sure the belt
retracts as snugly as possible. A
clicking noise from the retractor will be
heard during retraction if the system is
in the automatic locking mode. If the
belt does not lock the seat down tight,
repeat this step.
4. Secure the child-restraint system with
the lap portion of the lap/shoulder belt.
See the manufacturer's instructions on
the child-restraint system for belt
routing instructions.
5. To get the retractor into the automatic
locking mode, pull the shoulder belt
portion of the seat belt until the entire
length of the belt is out of the retractor.
NOTE
Inspect this function before each use of the
child-restraint system. You should not be able
to pull the shoulder belt out of the retractor
while the system is in the automatic locking
mode. When you remove the child-restraint
system, be sure the belt fully retracts to return
the system to emergency locking mode before
occupants use the seat belts.
7. If your child-restraint system requires
the use of a tether strap, refer to the
manufacturer's instructions to hook and
tighten the tether strap after raising the
head restraint (Third-row seats).
2-38
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page51
Friday, July 10 2015 5:25 PM
Black plate (51,1)
Essential Safety Equipment
Child Restraint
Anchor bracket location (Second-row
seats)
Tether strap position (Third-row seats)
Tether strap
Forward
Tether strap position (Second-row
seats)
Tether strap
Forward
Anchor bracket location (Third-row
seats)
Anchor
bracket
WARNING
Use the tether and tether anchor only
for a child-restraint system:
Using the tether or tether anchor to
secure anything but a child-restraint
system is dangerous. This could
weaken or damage the tether or
tether anchor and result in injury.
Always route the tether strap between
the head restraint and the seatback
(Third-row seats):
Routing the tether strap on top of the
head restraint is dangerous. In a
collision the tether strap could slide
off the head restraint and loosen the
child-restraint system. The childrestraint system could move which
may result in death or injury to the
child.
Always attach the tether strap to the
correct tether anchor position:
Attaching the tether strap to the
incorrect tether anchor position is
dangerous. In a collision, the tether
strap could come off and loosen the
child-restraint system. If the childrestraint system moves it could result
in death or injury to the child.
2-39
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page52
Friday, July 10 2015 5:25 PM
Black plate (52,1)
Essential Safety Equipment
Child Restraint
qIf You Must Use the Front Seat
for Children
If you cannot put all children in the rear
seats, at least put the smallest children in
the rear and be sure the largest child up
front uses the shoulder belt over the
shoulder.
NEVER put a rear-facing child-restraint
system on the front passenger seat
whether your vehicle is equipped with a
seat weight sensor or not.
This seat is also not set up for tethered
child-restraint systems, put them in one of
the rear seat positions set up with tether
anchors.
Likewise the LATCH child-restraint
system cannot be secured in the front
passenger's seat and should be used in the
second-row seats.
Do not allow anyone to sleep against the
side window if you have optional side and
curtain air bags, it could cause serious
injuries to an out of position occupant. As
children more often sleep in cars, it is
better to put them in the rear seat. If
installing the child-restraint system on the
front seat is unavoidable, follow these
instructions when using a front-facing
child-restraint system in the front
passenger's seat.
NOTE
l
l
To check if your front seats have side air
bags:
Mazda vehicles equipped with side air bag
will have a “SRS AIRBAG” tag on the
outboard shoulder of the front seats.
To check if your vehicle has curtain air
bags:
Mazda vehicles equipped with curtain air
bag will have an “SRS AIRBAG” marking
on the window pillars along the roof edge.
2-40
Form No.8FA7-EA-15G
WARNING
Always move the front passenger seat
as far back as possible if installing a
front-facing child-restraint system on it
is unavoidable:
As your vehicle has front air bags
and doubly so because your vehicle
has side air bags, a front-facing
child-restraint system should be put
on the front passenger seat only
when it is unavoidable.
Even if the front passenger air bag
deactivation indicator light
illuminates, always move the seat as
far back as possible, because the
force of a deploying air bag could
cause serious injury or death to the
child.
Never use a rear-facing child-restraint
system in the front seat with an air bag
that could deploy:
Rear-facing child-restraint systems
on the front seat are particularly
dangerous.
Even in a moderate collision, the
child-restraint system can be hit by a
deploying air bag and moved
violently backward resulting in
serious injury or death to the child.
Even though you may feel assured
that the front passenger air bag will
not deploy based on the fact that the
front passenger air bag deactivation
indicator light illuminates, you
should not use a rear-facing childrestraint system in the front seat.
Mazda5_8FA7-EA-15G_Edition2 Page53
Friday, July 10 2015 5:25 PM
Black plate (53,1)
Essential Safety Equipment
Child Restraint
Do not allow a child to lean over or
against the side window of a vehicle
with side air bags:
Allowing anyone to lean over or
against the front door is dangerous.
If the vehicle is equipped with side air
bags, the impact of an inflating side
air bag could cause serious injury or
death to the person. Children are
more likely to sleep in the vehicle;
when they do, they are more at risk
in the front passenger's seat that has
a side air bag because they may
slump over into the path of the
seatback-mounted air bag.
Furthermore, leaning over or against
the doors could block the side air bag
and eliminate the advantages of
supplemental protection. With the
front air bag and the additional side
air bag that deploys from the
outboard shoulder of the front
passenger seat, the rear seat is
always a better location for children
who are prone to sleeping. If a child
cannot be seated in the rear, do not
allow the child to lean over or
against the side window, even if the
child is seated in a child-restraint
system.
Do not allow a child or anyone to lean
over or against the side window of a
vehicle with side and curtain air bags:
It is dangerous to allow anyone to
lean over or against the side window,
the area of the front passenger seat,
the front and rear window pillars and
the roof edge along both sides from
which the side and curtain air bags
deploy, even if a child-restraint
system is used. The impact of
inflation from a side or curtain air
bag could cause serious injury or
death to an out of position child.
Furthermore, leaning over or against
the front door could block the side
and curtain air bags and eliminate
the advantages of supplemental
protection. With the front air bag and
the additional side air bag that
comes out of the front seat, the rear
seat is always a better location for
children. Take special care not to
allow a child to lean over or against
the side window, even if the child is
seated in a child-restraint system.
qFront Passenger's Seat ChildRestraint System Installation
1. Switch the ignition ON.
2. Slide the seat as far back as possible.
2-41
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page54
Friday, July 10 2015 5:25 PM
Black plate (54,1)
Essential Safety Equipment
Child Restraint
3. Place the child-restraint system on the
seat without putting your weight on the
seat and fasten the seat belt. See the
manufacturer's instructions on the
child-restraint system for belt routing
instructions.
4. To get the retractor into the automatic
locking mode, pull the shoulder belt
portion of the seat belt until the entire
length of the belt is out of the retractor.
5. Push the child-restraint system firmly
into the vehicle seat. Be sure the belt
retracts as snugly as possible. A
clicking noise from the retractor will be
heard during retraction if the system is
in automatic locking mode. If the belt
does not lock the seat down tight,
repeat the previous step and also this
one.
NOTE
l
l
Inspect this function before each use of the
child-restraint system. You should not be
able to pull the shoulder belt out of the
retractor while the system is in the
automatic locking mode. When you remove
the child-restraint system, be sure the belt
fully retracts to return the system to
emergency locking mode before occupants
use the seat belts.
Follow the child-restraint system
manufacturer's instructions carefully.
Depending on the type of child-restraint
system, it may not employ seat belts which
are in automatic locking mode.
6. Seat your child safely in the childrestraint system and secure the child
according to the instructions from the
child-restraint system manufacturer.
2-42
Form No.8FA7-EA-15G
7. (With Driver and Front Passenger
Occupant Classification System)
Make sure the front passenger air bag
deactivation indicator light illuminates
after installing a child-restraint system
on the front passenger seat.
If the front passenger air bag
deactivation indicator light does not
illuminate, remove the child-restraint
system, switch the ignition to OFF or
ACC, and then re-install the childrestraint system.
Mazda5_8FA7-EA-15G_Edition2 Page55
Friday, July 10 2015 5:25 PM
Black plate (55,1)
Essential Safety Equipment
Child Restraint
WARNING
Do not seat a child in a child-restraint
system on the front passenger seat if
the front passenger air bag
deactivation indicator light does not
illuminate (With Driver and Front
Passenger Occupant Classification
System):
While it is always better to install any
child-restraint system on the rear
seat, it is imperative that a childrestraint system ONLY be used on the
front passenger seat if the
deactivation indicator light
illuminates when the child is seated
in the child-restraint system. Seating
a child in a child-restraint system
installed on the front passenger seat
with the front passenger air bag
deactivation indicator light not
illuminated is dangerous. If this
indicator light does not illuminate,
this means that the front passenger
front and side air bags, and seat belt
pretensioner are ready for
deployment. If an accident were to
deploy an air bag, a child in a childrestraint system sitting in the front
passenger seat could be seriously
injured or killed. If the indicator light
does not illuminate after seating a
child in a child-restraint system on
the front passenger seat, seat a child
in a child-restraint system on the rear
seat and consult an Authorized
Mazda Dealer as soon as possible.
2-43
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page56
Friday, July 10 2015 5:25 PM
Black plate (56,1)
Essential Safety Equipment
Child Restraint
LATCH Child-Restraint Systems
Your Mazda is equipped with LATCH lower anchors for attachment of specially designed
LATCH child-restraint systems the second-row seats. Both anchors must be used,
otherwise the seat will bounce around and put the child in danger. Most LATCH childrestraint systems must also be used in conjunction with a tether to be effective. If they have
a tether you must use it to better assure your child's safety.
WARNING
Follow the manufacturer's instructions for the use of the child-restraint system:
An unsecured child-restraint system is dangerous. In a sudden stop or a collision it
could move causing serious injury or death to the child or other occupants. Make
sure the child-restraint system is properly secured in place according to the childrestraint system manufacturer's instructions.
Never attach two child-restraint systems to the same LATCH lower anchor:
Attaching two child-restraint systems to the same LATCH lower anchor is dangerous.
In a collision, one anchor may not be strong enough to hold two child-restraint
system attachments, and it may break, causing serious injury or death. If you use the
seat position for another child-restraint system when an outboard LATCH position is
occupied, use the center seat belts instead, and the tether if tether-equipped.
Make sure the child-restraint system is properly secured:
An unsecured child-restraint system is dangerous. In a sudden stop or a collision it
could move causing serious injury or death to the child or other occupants. Follow
the child-restraint system manufacturer's instructions on belt routing to secure the
seat just as you would with a child in it so that nobody is tempted to put a child in
an improperly secured seat later on. When not in use, remove it from the vehicle or
fasten it with a seat belt, or latch it down to BOTH LATCH lower anchors for LATCH
child-restraint systems.
Make sure there are no seat belts or foreign objects near or around the LATCH childrestraint system:
Not following the child-restraint system manufacturer's instructions when installing
the child-restraint system is dangerous. If seat belts or a foreign object prevent the
child-restraint system from being securely attached to the LATCH lower anchors and
the child-restraint system is installed improperly, the child-restraint system could
move in a sudden stop or collision causing serious injury or death to the child or
other occupants. When installing the child-restraint system, make sure there are no
seat belts or foreign objects near or around the LATCH lower anchors. Always follow
the child-restraint system manufacturer's instructions.
2-44
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page57
Friday, July 10 2015 5:25 PM
Black plate (57,1)
Essential Safety Equipment
Child Restraint
qLATCH Child-Restraint System
Installation Procedure (SecondRow Seats)
1. Slide the second-row seat as far back as
possible.
2. Make sure the seatback is securely
latched by pushing it back until it is
fully locked.
5. If your child-restraint system came
equipped with a tether, that means it is
very important to properly secure the
tether for child safety. Please carefully
follow the child-restraint system
manufacturer's instructions when
installing tethers.
Anchor bracket location
3. Expand the area between the seat
bottom and the seatback slightly to
verify the locations of the LATCH
lower anchors.
Tether strap position
Tether strap
NOTE
The markings above the LATCH lower anchors
indicate the locations of LATCH lower
anchors for the attachment of a child-restraint
system.
Forward
4. Secure the child-restraint system using
BOTH LATCH lower anchors,
following the child-restraint system
manufacturer's instruction. Pull on the
child-restraint to be sure both anchors
are engaged.
2-45
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page58
Friday, July 10 2015 5:25 PM
Essential Safety Equipment
Child Restraint
WARNING
Use the tether and tether anchor only
for a child-restraint system:
Using the tether or tether anchor to
secure anything but a child-restraint
system is dangerous. This could
weaken or damage the tether or
tether anchor and result in injury.
Always attach the tether strap to the
correct tether anchor position:
Attaching the tether strap to the
incorrect tether anchor position is
dangerous. In a collision, the tether
strap could come off and loosen the
child-restraint system. If the childrestraint system moves it could result
in death or injury to the child.
2-46
Form No.8FA7-EA-15G
Black plate (58,1)
Mazda5_8FA7-EA-15G_Edition2 Page59
Friday, July 10 2015 5:25 PM
Black plate (59,1)
Essential Safety Equipment
SRS Air Bags
Supplemental Restraint System (SRS) Precautions
The front and side supplemental restraint systems (SRS) include different types of air bags.
Please verify the air bags equipped on your vehicle by locating the “SRS AIRBAG”
location indicators. These indicators are visible in the area where the air bags are installed.
The air bags are installed in the following locations:
l
l
l
l
The steering wheel hub (driver air bag)
The front passenger dashboard (front passenger air bag)
The outboard sides of the front seatbacks (side air bags)
The front and rear window pillars, and the roof edge along both sides (curtain air bags)
The air bag supplemental restraint systems are designed to provide supplemental protection
in certain situations, so seat belts are always important in the following ways:
Without seat belt usage, the air bags cannot provide adequate protection during an accident.
Seat belt usage is necessary to:
l Keep the occupant from being thrown into an inflating air bag.
l Reduce the possibility of injuries during an accident that is not designed for air bag
inflation, such as roll-over or rear impact.
l Reduce the possibility of injuries in frontal, near frontal, side collisions that are not
severe enough to activate the air bags.
l Reduce the possibility of being thrown from your vehicle.
l Reduce the possibility of injuries to lower body and legs during an accident because the
air bags provide no protection to these parts of the body.
l Hold the driver in a position which allows better control of the vehicle.
2-47
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page60
Friday, July 10 2015 5:25 PM
Black plate (60,1)
Essential Safety Equipment
SRS Air Bags
If your vehicle is also equipped with a driver and front passenger occupant
classification system, refer to the Driver and Front Passenger Occupant Classification
System (page 2-62) for details.
If your vehicle is equipped with a driver and front passenger occupant classification
system, the front passenger air bag deactivation indicator light illuminates for a specified
time after the ignition is switched ON.
Small children must be protected by a child-restraint system as stipulated by law in every
state and province. In certain states and provinces, larger children must use a child-restraint
system (page 2-31).
Carefully consider which child-restraint system is necessary for your child and follow the
installation directions in this Owner's Manual as well as the child-restraint system
manufacturer's instructions.
WARNING
Seat belts must be worn in air bag equipped vehicles:
Depending only on the air bags for protection during an accident is dangerous.
Alone, air bags may not prevent serious injuries. The appropriate air bags can be
expected to inflate only in the first accident, such as frontal, near frontal, side
collisions that are at least moderate. Vehicle occupants should always wear seat
belts.
Children should not ride in the front passenger seat:
Placing a child, 12 years or under, in the front seat is dangerous. The child could be
hit by a deploying air bag and be seriously injured or even killed. Even if the front
passenger air bag deactivation indicator light illuminates, always move the front
passenger seat as far back as possible. A sleeping child is more likely to lean against
the door and be hit by the side air bag in a moderate collision to the front-passenger
side of the vehicle. Whenever possible, always secure a child 12 years and under on
the rear seats with an appropriate child-restraint system for the child's age and size.
2-48
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page61
Friday, July 10 2015 5:25 PM
Black plate (61,1)
Essential Safety Equipment
SRS Air Bags
Never use a rear-facing child-restraint system in the front seat with an air bag that
could deploy:
Rear-facing child-restraint systems on the front seat are particularly dangerous even
though you may feel assured that a front passenger air bag will not deploy based on
the fact that the front passenger air bag deactivation indicator light illuminates. The
child-restraint system can be hit by a deploying air bag and moved violently
backward resulting in serious injury or death to the child.
Do not sit too close to the driver and front passenger air bags:
Sitting too close to the driver and front passenger air bag modules or placing hands
or feet on them is extremely dangerous. The driver and front passenger air bags
inflate with great force and speed. Serious injuries could occur if someone is too
close. The driver should always hold onto only the rim of the steering wheel. The
front seat passenger should keep both feet on the floor. Front seat occupants should
adjust their seats as far back as possible and always sit upright against the
seatbacks with seat belts worn properly.
Sit in the center of the seat and wear seat belts properly:
Sitting too close to the side air bag modules or placing hands on them, or sleeping
up against the door or hanging out the windows is extremely dangerous. The side
and curtain air bags inflate with great force and speed directly expanding along the
door on the side the car is hit. Serious injury could occur if someone is sitting too
close to the door or leaning against a window, or if rear seat occupants grab the
sides of the front seatbacks. Give the side and curtain air bags room to work by
sitting in the center of the seat while the vehicle is moving with seat belts worn
properly.
Do not attach objects on or around the area where driver and front passenger air
bags deploy:
Attaching an object to the driver and front passenger air bag modules or placing
something in front of them is dangerous. In an accident, an object could interfere
with air bag inflation and injure the occupants.
2-49
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page62
Friday, July 10 2015 5:25 PM
Black plate (62,1)
Essential Safety Equipment
SRS Air Bags
Do not attach objects on or around the area where a side air bag deploys:
Attaching objects to the front seat in such a way as to cover the outboard side of the
seat in any way is dangerous. In an accident the object could interfere with the side
air bag, which inflates from the outboard side of the front seats, impeding the added
protection of the side air bag system or redirecting the air bag in a way that is
dangerous. Furthermore, the bag could be cut open releasing the gas.
Do not hang net bags, map pouches or backpacks with side straps on the front
seats. Never use seat covers on the front seats. Always keep the side air bag modules
in your front seats free to deploy in the event of a side collision.
Do not attach objects on or around the area where a curtain air bag deploys:
Attaching objects to the areas where the curtain air bag activates such as on the
windshield glass, side door glass, front and rear window pillars and along the roof
edge and assist grips is dangerous. In an accident the object could interfere with the
curtain air bag, which inflates from the front and rear window pillars and along the
roof edge, impeding the added protection of the curtain air bag system or redirecting
the air bag in a way that is dangerous. Furthermore, the bag could be cut open
releasing the gas.
Do not place hangers or any other objects on the assist grips. When hanging clothes,
hang them on the coat hook directly. Always keep the curtain air bag modules free
to deploy in the event of a side collision.
Do not place luggage or other objects under the front seats:
Placing luggage or other objects under the front seats is dangerous. The components
essential to the supplemental restraint system could be damaged, and in the event of
a side collision, the appropriate air bags may not deploy, which could result in death
or serious injury. To prevent damage to the components essential to the
supplemental restraint system, do not place luggage or other objects under the front
seats.
Do not touch the components of the supplemental restraint system after the air bags
have inflated:
Touching the components of the supplemental restraint system after the air bags
have inflated is dangerous. Immediately after inflation, they are very hot. You could
get burned.
Never install any front-end equipment to your vehicle:
Installation of front-end equipment, such as frontal protection bar (kangaroo bar,
bull bar, push bar, or other similar devices), snowplow, or winches, is dangerous. The
air bag crash sensor system could be affected. This could cause air bags to inflate
unexpectedly, or it could prevent the air bags from inflating during an accident.
Front occupants could be seriously injured.
2-50
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page63
Friday, July 10 2015 5:25 PM
Black plate (63,1)
Essential Safety Equipment
SRS Air Bags
Do not modify the suspension:
Modifying the vehicle suspension is dangerous. If the vehicle's height or the
suspension is modified, the vehicle will be unable to accurately detect a collision
resulting in incorrect or unexpected air bag deployment and the possibility of serious
injuries.
Do not modify a front door or leave any damage unrepaired. Always have an
Authorized Mazda Dealer inspect a damaged front door:
Modifying a front door or leaving any damage unrepaired is dangerous. Each front
door has a side crash sensor as a component of the supplemental restraint system. If
holes are drilled in a front door, a door speaker is left removed, or a damaged door is
left unrepaired, the sensor could be adversely affected causing it to not detect the
pressure of an impact correctly during a side collision. If a sensor does not detect a
side impact correctly, the side and curtain air bags and the front seat belt
pretensioner may not operate normally which could result in serious injury to
occupants.
Do not modify the supplemental restraint system:
Modifying the components or wiring of the supplemental restraint system is
dangerous. You could accidentally activate it or make it inoperable. Do not make
any modifications to the supplemental restraint system. This includes installing trim,
badges, or anything else over the air bag modules. It also includes installing extra
electrical equipment on or near system components or wiring. An Authorized Mazda
Dealer can provide the special care needed in the removal and installation of front
seats. It is important to protect the air bag wiring and connections to assure that the
bags do not accidentally deploy, the driver seat slide position sensor and front
passenger seat weight sensors are not damaged and that the seats retain an
undamaged air bag connection.
2-51
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page64
Friday, July 10 2015 5:25 PM
Black plate (64,1)
Essential Safety Equipment
SRS Air Bags
NOTE
l
l
l
When an air bag deploys, a loud inflation noise can be heard and some smoke will be released.
Neither is likely to cause injury, however, the texture of the air bags may cause light skin injuries
on body parts not covered with clothing through friction.
Should you sell your Mazda, we urge you to tell the new owner of its air bag systems and that
familiarization with all instructions about them, from the Owner's Manual, is important.
This highly-visible label is displayed which warns against the use of rear-facing child-restraint
systems on the front passenger seat.
2-52
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page65
Friday, July 10 2015 5:25 PM
Black plate (65,1)
Essential Safety Equipment
SRS Air Bags
Supplemental Restraint System Components
With front passenger occupant classification system
2-53
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page66
Friday, July 10 2015 5:25 PM
Black plate (66,1)
Essential Safety Equipment
SRS Air Bags
Without front passenger occupant classification system
Driver/Front passenger inflators and air bags
Crash sensor, and diagnostic module (SAS unit)
Front seat belt pretensioner and load limiting systems (page 2-25)
Front air bag sensor
Side crash sensors
Air bag/front seat belt pretensioner system warning light (page 2-58)
Side and curtain inflators and air bags
Front passenger air bag deactivation indicator light (page 2-62)
Front passenger seat weight sensors (page 2-62)
Front passenger seat weight sensor control module
Driver and front passenger seat belt buckle switches (page 2-66)
Driver seat slide position sensor (page 2-62)
NOTE
system.
are equipped only on models with the driver and front passenger occupant classification
2-54
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page67
Friday, July 10 2015 5:25 PM
Black plate (67,1)
Essential Safety Equipment
SRS Air Bags
How the SRS Air Bags Work
Your Mazda is equipped with the following types of SRS air bags. SRS air bags are
designed to work together with the seat belts to help to reduce injuries during an accident.
The SRS air bags are designed to provide further protection for passengers in addition to
the seat belt functions. Be sure to wear seat belts properly.
qFront Seat Belt Pretensioners
The front seat belt pretensioners are designed to deploy in moderate or severe frontal, near
frontal collisions. In addition, during a side collision, the pretensioner operates on the side
in which the collision occurs.
The pretensioners operate differently depending on what types of air bags are equipped.
For details on the seat belt pretensioner operation, refer to “SRS Air Bag Deployment
Criteria” (page 2-59).
qDriver Air Bag
The driver's air bag is mounted in the steering wheel.
When air bag crash sensors detect a frontal impact of greater than moderate force, the
driver's air bag inflates quickly helping to reduce injury mainly to the driver's head or chest
caused by directly hitting the steering wheel.
For more details about air bag deployment, refer to “SRS Air Bag Deployment Criteria”
(page 2-59).
(With Driver and Front Passenger Occupant Classification System)
The driver's dual-stage air bag controls air bag inflation in two energy stages. During an
impact of moderate severity the driver's air bag deploys with lesser energy, whereas during
more severe impacts, it deploys with more energy.
2-55
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page68
Friday, July 10 2015 5:25 PM
Black plate (68,1)
Essential Safety Equipment
SRS Air Bags
qFront Passenger Air Bag
The front passenger air bag is mounted in the front passenger dashboard. The inflation
mechanism for the front passenger air bag is the same as the driver's air bag, as mentioned
above.
For more details about air bag deployment, refer to “SRS Air Bag Deployment Criteria”
(page 2-59).
(With Driver and Front Passenger Occupant Classification System)
In addition, the front passenger air bag is designed to only deploy in accordance with the
total seated weight on the front passenger seat. For details, refer to the driver and front
passenger occupant classification system (page 2-62).
qSide Air Bags
The side air bags are mounted in the outboard sides of the front seatbacks.
When the air bag crash sensors detect a side impact of greater than moderate force, the
system inflates the side air bag only on the side in which the vehicle was hit. The side air
bag inflates quickly to reduce injury to the driver or front passenger's chest caused by
directly hitting interior parts such as a door or window.
For more details about air bag deployment, refer to “SRS Air Bag Deployment Criteria”
(page 2-59).
2-56
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page69
Friday, July 10 2015 5:25 PM
Black plate (69,1)
Essential Safety Equipment
SRS Air Bags
(With Driver and Front Passenger Occupant Classification System)
In addition, the front passenger side air bag is designed to only deploy in accordance with
the total seated weight on the front passenger seat. For details, refer to the driver and front
passenger occupant classification system (page 2-62).
qCurtain Air Bags
The curtain air bags are mounted in the front and rear window pillars, and the roof edge
along both sides.
When the air bag crash sensors detect a side impact of greater than moderate force, the
curtain air bag inflates quickly and helps to reduce injury mainly to the rear outboard
passenger's head caused by directly hitting interior parts such as a door or window.
For more details about air bag deployment, refer to “SRS Air Bag Deployment Criteria”
(page 2-59).
In a side impact:
Greater than moderate impact to one side of the vehicle will cause the curtain air bag on
that side only to inflate.
The side and curtain air bags will deploy only on the side the
vehicle receives the force of the impact.
2-57
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page70
Friday, July 10 2015 5:25 PM
Black plate (70,1)
Essential Safety Equipment
SRS Air Bags
qAir Bag/Front Seat Belt Pretensioner System Warning Light
If the air bag/front seat belt pretensioner system is working properly, the warning light
illuminates when the ignition is switched ON or after the engine is cranked. The warning
light turns off after a specified period of time.
A system malfunction is indicated if the warning light constantly flashes, constantly
illuminates or does not illuminate at all when the ignition is switched ON. If any of these
occur, consult an Authorized Mazda Dealer as soon as possible. The system may not
operate in an accident.
WARNING
Never tamper with the air bag/pretensioner systems and always have an Authorized
Mazda Dealer perform all servicing and repairs:
Self-servicing or tampering with the systems is dangerous. An air bag/pretensioner
could accidentally activate or become disabled causing serious injury or death.
qAir Bag/Front Seat Belt Pretensioner System Warning Beep
If a malfunction is detected in the air bag/front seat belt pretensioner systems and the
warning light, a warning beep sound will be heard for about 5 seconds every minute.
The air bag and seat belt pretensioner system warning beep sound will continue to be heard
for approximately 35 minutes.
Have your vehicle inspected at an Authorized Mazda Dealer as soon as possible.
WARNING
Do not drive the vehicle with the air bag/front seat belt pretensioner system warning
beep sounding:
Driving the vehicle with the air bag/front seat belt pretensioner system warning beep
sounding is dangerous. In a collision, the air bags and the front seat belt
pretensioner system will not deploy and this could result in death or serious injury.
Contact an Authorized Mazda Dealer to have the vehicle inspected as soon as
possible.
2-58
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page71
Friday, July 10 2015 5:25 PM
Black plate (71,1)
Essential Safety Equipment
SRS Air Bags
SRS Air Bag Deployment Criteria
This chart indicates the applicable SRS equipment that will deploy depending on the type
of collision.
(The illustrations are the representative cases of collisions.)
A severe frontal/near frontal collision
Types of collision
A severe side collision
A rear collision
SRS
equipment
Front seat
belt
pretensioner
Driver air
bag
Front
passenger air
bag
X*1 (both sides)
X*1 (impact side only)
X
No air bag and front seat
belt pretensioner will be
activated in a rear collision.
*1
X
Side air bag
X*1 (impact side only)
Curtain air
bag
X (impact side only)
X: The SRS air bag equipment is designed to deploy in a collision.
*1: (With Driver and Front Passenger Occupant Classification System)
The front passenger front and side air bags and the seat belt pretensioner are designed
to deploy depending on the condition of the total seated weight on the front passenger
seat.
2-59
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page72
Friday, July 10 2015 5:25 PM
Black plate (72,1)
Essential Safety Equipment
SRS Air Bags
Limitations to SRS Air Bag
In severe collisions such as those described previously in “SRS Air Bag Deployment
Criteria”, the applicable SRS air bag equipment will deploy. However, in some accidents,
the equipment may not deploy depending on the type of collision and its severity.
Limitations to front/near front collision detection:
The following illustrations are examples of front/near front collisions that may not be
detected as severe enough to deploy the SRS air bag equipment.
Impacts involving trees or poles
Frontal offset impact to the vehicle
Rear-ending or running under a truck's tail gate
Limitations to side collision detection:
The following illustrations are examples of side collisions that may not be detected as
severe enough to deploy the SRS air bag equipment.
Side impacts involving trees or poles
2-60
Form No.8FA7-EA-15G
Side impacts with two-wheeled vehicles
Mazda5_8FA7-EA-15G_Edition2 Page73
Friday, July 10 2015 5:25 PM
Black plate (73,1)
Essential Safety Equipment
SRS Air Bags
Roll-over
2-61
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page74
Friday, July 10 2015 5:25 PM
Black plate (74,1)
Essential Safety Equipment
SRS Air Bags
Driver and Front Passenger Occupant Classification System í
First, please read “Supplemental Restraint System (SRS) Precautions” (page 2-47)
carefully.
qDriver Seat Slide Position Sensor
Your vehicle is equipped with a driver seat slide position sensor as a part of the
supplemental restraint system. The sensor is located under the driver seat. The sensor
determines whether the driver seat is fore or aft of a reference position and sends the seat
position to the diagnostic module (SAS unit). The SAS unit is designed to control the
deployment of the driver air bag depending on how close the driver seat is to the steering
wheel.
The air bag/front seat belt pretensioner system warning light flashes if the sensor has a
possible malfunction (page 2-58).
qFront Passenger Seat Weight Sensors
Your vehicle is equipped with a front passenger seat weight sensors as a part of the
supplemental restraint system. These sensors are located under both of the front passenger
seat rails. These sensors determine the total seated weight on the front passenger seat and
monitor the seat belt buckle for the front passenger seat. The SAS unit is designed to
prevent the front passenger front and side air bags and seat belt pretensioner system from
deploying if the front passenger air bag deactivation indicator light illuminates.
To reduce the chance of injuries caused by deployment of the front passenger air bag, the
system deactivates the front passenger front and side air bags and also the seat belt
pretensioner system when the front passenger air bag deactivation indicator light
illuminates. Refer to the following table for the front passenger air bag deactivation
indicator light illumination conditions.
This system shuts off the front passenger front and side air bags and seat belt pretensioner
system, so make sure the front passenger air bag deactivation indicator light illuminates
according to the following table.
The air bag/front seat belt pretensioner system warning light flashes and the front
passenger air bag deactivation indicator light illuminates if the sensors have a possible
malfunction. If this happens, the front passenger front and side air bags and seat belt
pretensioner system will not deploy.
2-62
í
Some models.
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page75
Friday, July 10 2015 5:25 PM
Black plate (75,1)
Essential Safety Equipment
SRS Air Bags
Front passenger air bag deactivation indicator light
This indicator light illuminates to remind you that the front passenger front and side air
bags and seat belt pretensioner will not deploy during a collision.
If the front passenger weight sensors are normal, the indicator light illuminates when the
ignition is switched ON. The light turns off after a few seconds. Then, the indicator light
illuminates or is off under the following conditions:
Front passenger air bag deactivation indicator light on/off condition chart
Condition detected by the
Front passenger seat
Front passenger air bag Front passenger front and
front passenger occupant
belt pretensioner
deactivation indicator light
side air bags
classification system
system
Off
Deactivated
Deactivated
Empty (Not occupied)*1
Child or child-restraint
On
Deactivated
Deactivated
system*2
*3
Off
Ready
Ready
Adult
*1 : If the front passenger seat belt is buckled, the front passenger air bag deactivation indicator light illuminates,
however this does not indicate a malfunction.
*2 : If a larger child sits on the front passenger seat, the sensors might detect the child as being an adult depending
on the child's physique.
*3 : If a smaller adult sits on the front passenger seat, the sensors might detect the person as being a child
depending on the person's physique.
The curtain air bag is ready for inflating regardless of what the front passenger air bag deactivation indicator light
on/off condition chart indicates.
If the front passenger air bag deactivation indicator light does not illuminate when the
ignition is switched ON and does not illuminate as indicated in the front passenger air bag
deactivation indicator light on/off condition chart, do not allow a child to sit in the front
passenger seat and consult an Authorized Mazda Dealer as soon as possible. The system
may not work properly in an accident.
2-63
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page76
Friday, July 10 2015 5:25 PM
Black plate (76,1)
Essential Safety Equipment
SRS Air Bags
WARNING
Do not decrease the total seated weight on the front passenger seat:
When an adult or large child sits on the front passenger seat, decreasing the total
seated weight on the front passenger seat required for air bag deployment is
dangerous. The front passenger seat weight sensors will detect the reduced total
seated weight condition and the front passenger front and side air bags and seat
belt pretensioner system will not deploy during an accident. The front passenger will
not have the supplementary protection of the air bag, which could result in serious
injury. Decreasing the total seated weight on the front passenger seat could result in
an air bag not deploying under the following conditions, for example:
Ø A rear passenger pushes up on the front passenger seat with their feet.
Ø Luggage or other items placed under the front passenger seat or between the
front passenger seat and driver seat that push up the front passenger seat
bottom.
Ø The front passenger seat occupant sits in a manner that does not place the entire
weight of the occupant on the seat such as by sitting too close to the door,
grasping the assist grip or the rim of the moonroof and sitting with the seatback
reclined too far.
Ø Any accessories which might decrease the total seated weight on the front
passenger seat are attached to the front passenger seat.
The front passenger front and side air bags and seat belt pretensioner systems will
deactivate if the front passenger air bag deactivation indicator light illuminates.
2-64
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page77
Friday, July 10 2015 5:25 PM
Black plate (77,1)
Essential Safety Equipment
SRS Air Bags
Do not increase the total seated weight on the front passenger seat:
When an infant or small child sits on the front passenger seat, increasing the total
seated weight on the front passenger seat is dangerous. The front passenger seat
weight sensors will detect the increased total seated weight, which could result in the
unexpected deployment of the front passenger front and side air bags and seat belt
pretensioner system in an accident and may cause serious injury. Increasing the total
seated weight on the front passenger seat could result in the front passenger front
and side air bags and seat belt pretensioner system deployment in an accident under
the following conditions, for example:
Ø Luggage or other items are placed on the seat with the child in the child-restraint
system.
Ø A rear passenger or luggage push or pull down on the front passenger seatback.
Ø A rear passenger steps on the front passenger seat rails with their feet.
Ø Luggage or other items are placed on the seatback or hung on the head restraint
or armrest.
Ø Heavy items are placed in the seatback map pocket.
Ø The seat is washed.
Ø Liquids are spilled on the seat.
Ø The front passenger seat is moved backward, pushing into luggage or other items
placed behind it.
Ø The front passenger seatback contacts the second-row seat.
Ø Luggage or other items are placed between the front passenger seat and driver
seat.
Ø Any accessories which might increase the total seated weight on the front
passenger seat are attached to the front passenger seat.
The front passenger front and side air bags and seat belt pretensioner systems will
deactivate if the front passenger air bag deactivation indicator light illuminates.
CAUTION
Ø To assure proper deployment of the front air bag and to prevent damage to the
sensors in the front seat bottoms:
Ø Do not place sharp objects on the front seat bottoms or leave heavy luggage on
them.
Ø Do not spill any liquids on the front seats or under the front seats.
Ø To allow the sensors to function properly, always perform the following:
Ø Adjust the front seats as far back as possible and always sit upright against the
seatbacks with seat belts worn properly.
Ø If you place your child on the front passenger seat, secure the child-restraint
system properly and slide the front passenger seat as far back as possible (page
2-41).
2-65
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page78
Friday, July 10 2015 5:25 PM
Black plate (78,1)
Essential Safety Equipment
SRS Air Bags
NOTE
l
l
l
l
l
l
The system requires about 10 seconds to alternate between turning the front passenger front and
side air bags and seat belt pretensioner system on or off.
The front passenger air bag deactivation indicator light may illuminate repeatedly if luggage or
other items are put on the front passenger seat, or if the temperature of the vehicle's interior
changes suddenly.
The front passenger air bag deactivation indicator light may illuminate for 10 seconds if the total
seated weight on the front passenger seat changes.
The air bag/front seat belt pretensioner system warning light might illuminate if the front
passenger seat receives a severe impact.
If the front passenger air bag deactivation indicator light does not illuminate after installing a
child-restraint system on the front passenger seat, first, re-install your child-restraint system
according to the procedure in this owner's manual. Then, if the front passenger air bag
deactivation indicator light still does not illuminate, install the child-restraint system on the rear
seat and consult an Authorized Mazda Dealer as soon as possible.
If the front passenger air bag deactivation indicator light illuminates when an adult is seated in
the front passenger seat, have the passenger re-adjust their posture by sitting with their feet on the
floor, and then re-fastening the seat belt. If the front passenger air bag deactivation indicator light
still illuminates, move the passenger to the rear seat. If sitting in the rear seat is not possible, slide
the front passenger seat as far back as possible. Consult an Authorized Mazda Dealer as soon as
possible.
qDriver and Front Passenger Buckle Switches
The buckle switches on the front seat belts detect whether or not the front seat belts are
securely fastened and further control the deployment of the air bags.
2-66
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page79
Friday, July 10 2015 5:25 PM
Black plate (79,1)
Essential Safety Equipment
SRS Air Bags
Monitoring and Maintenance
qConstant Monitoring
The following components of the air bag systems are monitored by a diagnostic system:
Crash sensors, and diagnostic module (SAS unit)
Front air bag sensor
l Air bag modules
l Side crash sensors
l Air bag/Front seat belt pretensioner system warning light
l Front seat belt pretensioners
l Related wiring
(With Driver and Front Passenger Occupant Classification System)
l Front passenger air bag deactivation indicator light
l Driver seat slide position sensor
l Front passenger seat weight sensors
l Front passenger seat weight sensor control module
l
l
The diagnostic module continuously monitors the system's readiness. This begins when the
ignition is switched ON and continues while the vehicle is being driven.
qMaintenance
The air bag systems do not require regular maintenance. But if any of the following occurs,
take your vehicle to an Authorized Mazda Dealer as soon as possible:
l The air bag system warning light flashes.
l The air bag system warning light remains illuminated.
l The air bag system warning light does not illuminate when the ignition is switched ON.
l The air bag system warning beep sound is heard.
l The air bags have deployed.
l (With Driver and Front Passenger Occupant Classification System)
Front passenger air bag deactivation indicator light does not illuminate when the ignition
is switched ON or does not illuminate as indicated in the chart. For more details about
this indicator light and this chart, refer to “Front passenger seat weight sensors” (page
2-62).
2-67
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page80
Friday, July 10 2015 5:25 PM
Black plate (80,1)
Essential Safety Equipment
SRS Air Bags
WARNING
Do not operate a vehicle with damaged air bag/seat belt pretensioner system
components:
Expended or damaged air bag/seat belt pretensioner system components must be
replaced after any collision which caused them to deploy or damage them. Only a
trained Authorized Mazda Dealer can fully evaluate these systems to see that they
will work in any subsequent accident. Driving with an expended or damaged air bag
or pretensioner unit will not afford you the necessary protection in the event of any
subsequent accident which could result in serious injury or death.
Do not remove interior air bag parts:
Removing any components such as the front seats, front dashboard, the steering
wheel or parts on the front and rear window pillars and along the roof edge,
containing air bag parts or sensors is dangerous. These parts contain essential air
bag components. The air bag could accidentally activate and cause serious injuries.
Always have an Authorized Mazda Dealer remove these parts.
Dispose of the air bag properly:
Improper disposal of an air bag or a vehicle with live air bags in it can be extremely
dangerous. Unless all safety procedures are followed, injury can result. Ask an
Authorized Mazda Dealer how to safely dispose of an air bag or how to scrap an air
bag equipped vehicle.
NOTE
If it becomes necessary to have the components or wiring system for the supplementary restraint
system modified to accommodate a person with certain medical conditions in accordance with a
certified physician, contact an Authorized Mazda Dealer, refer to “Customer Assistance (U.S.A.)”
(page 9-2).
2-68
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page81
Friday, July 10 2015 5:25 PM
3
Black plate (81,1)
Knowing Your Mazda
Explanation of basic operations and controls; opening/closing and adjustment
of various parts.
Doors and Locks ........................................................................... 3-2
Keys .......................................................................................... 3-2
Keyless Entry System ............................................................... 3-3
Door Locks ............................................................................... 3-9
Liftgate .................................................................................... 3-14
Power Windows ...................................................................... 3-17
Fuel-Filler Lid and Cap ........................................................... 3-20
Hood ....................................................................................... 3-21
Moonroof í ............................................................................. 3-23
Security System ........................................................................... 3-25
Immobilizer System ................................................................ 3-25
Theft-Deterrent System í ........................................................ 3-29
Steering Wheel and Mirrors ...................................................... 3-32
Steering Wheel ........................................................................ 3-32
Mirrors .................................................................................... 3-32
í
Some models.
Form No.8FA7-EA-15G
3-1
Mazda5_8FA7-EA-15G_Edition2 Page82
Friday, July 10 2015 5:25 PM
Black plate (82,1)
Knowing Your Mazda
Doors and Locks
Keys
WARNING
Do not leave the key in your vehicle
with children and keep them in a place
where your children will not find or
play with them:
Leaving children in a vehicle with the
key is dangerous. This could result in
someone being badly injured or even
killed. Children may find these new
kinds of keys to be an interesting toy
to play with and could cause the
power windows or other controls to
operate, or even make the vehicle
move.
A code number is stamped on the plate
attached to the key set; detach this plate
and store it in a safe place (not in the
vehicle) for use if you need to make a
replacement key.
NOTE
l
l
Write down the code number and keep it in
a separate, safe and convenient place, but
not in the vehicle.
If your key is lost, consult your Authorized
Mazda Dealer and have your code number
ready.
Some types of key chains cannot be
attached to the retractable type key. In this
case, use the key ring provided with the
transmitter which has the key code number
plate attached.
NOTE
l
l
Refer to Immobilizer System (page 3-25) for
information regarding keys and engine
starting.
(With theft-deterrent system)
Refer to Theft-Deterrent System (page 3-29)
for information regarding keys and the
prevention of vehicle and vehicle contents
theft.
Key ring
The keys operate all locks.
Retractable
type key
Key code number plate
3-2
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page83
Friday, July 10 2015 5:25 PM
Black plate (83,1)
Knowing Your Mazda
Doors and Locks
Key extend/retract method (Retractable
type key)
To extend the key, press the release
button.
Keyless Entry System
This system remotely locks and unlocks
the doors and the liftgate.
It can also help you signal for attention.
Press the buttons slowly and carefully.
CAUTION
To avoid damage to the transmitter,
do not:
Ø Drop the transmitter.
Ø Get the transmitter wet.
Ø Disassemble the transmitter.
Ø Expose the transmitter to any kind
of magnetic field.
Ø Expose the transmitter to high
temperatures on places such as
the dashboard or hood, under
direct sunlight.
To retract the key, rotate it into the holder
while pressing the release button.
NOTE
l
l
l
l
The keyless entry system is designed to
operate up to about 2.5 m (8 ft) from the
center of the vehicle, but this may vary due
to local conditions.
The system does not operate when the key is
in the ignition switch.
If the transmitter does not operate when
pressing a button or the operation range
becomes too small, the battery may be
dead. To install a new battery, refer to
Maintenance (page 3-7).
Additional transmitters can be obtained at
an Authorized Mazda Dealer. Up to 3
transmitters can be used with the keyless
entry system per vehicle. Bring all
transmitters to an Authorized Mazda
Dealer when additional transmitters are
required.
3-3
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page84
Friday, July 10 2015 5:25 PM
Black plate (84,1)
Knowing Your Mazda
Doors and Locks
qTransmitter
Lock button
Unlock button
Operation
indicator light
Panic button
To confirm that all doors and the liftgate
have been locked, press the lock button
again within 5 seconds. If they are closed
and locked, the horn will sound and the
hazard warning lights will flash once.
The system can be set not to sound the
horn.
Refer to Personalization Features on page
10-8.
NOTE
l
NOTE
l
l
(U.S.A.)
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation.
(CANADA)
This device complies with RSS-210 of
Industry CANADA. Operation is subject to
the following two conditions: (1) this device
may not cause interference, and (2) this
device must accept any interference,
including interference that may cause
undesired operation of the device.
l
The operation indicator light flashes when
the buttons are pressed.
Lock button
To lock the doors and the liftgate, press
the lock button and the hazard warning
lights will flash once.
l
l
l
3-4
Form No.8FA7-EA-15G
Doors and the liftgate can be locked by
pressing the lock button while any other
door or the liftgate is open. However, the
hazard warning lights will not flash and the
horn will not sound.
(Without theft-deterrent system)
The hazard warning lights will flash once
to indicate that all doors and the liftgate
are locked.
(With theft-deterrent system)
The hazard warning lights flash when the
theft deterrent system is armed.
The hazard warning lights do not flash if all
the doors and the liftgate are locked before
the theft-deterrent system is properly
armed.
When the doors are locked by pressing the
lock button on the transmitter while the
theft-deterrent system is armed, the hazard
warning lights will flash once to indicate
that the system is armed.
Refer to Theft-Deterrent System on page
3-29.
The hazard warning lights can be set to not
flash when the doors are locked or
unlocked.
Refer to Personalization Features on page
10-8.
All doors and the liftgate cannot be locked
when the key is in the ignition switch.
Confirm that all doors and the liftgate are
locked visually or audibly by use of the
double click.
Mazda5_8FA7-EA-15G_Edition2 Page85
Friday, July 10 2015 5:25 PM
Black plate (85,1)
Knowing Your Mazda
Doors and Locks
Unlock button
To unlock the driver's door, press the
unlock button and the hazard warning
lights will flash twice.
To unlock all doors and the liftgate, press
the unlock button again within 5 seconds
and the hazard warning lights will flash
twice.
NOTE
(Without theft-deterrent system)
The hazard warning lights will flash twice to
indicate that all doors and the liftgate are
unlocked.
(With theft-deterrent system)
The hazard warning lights flash when the theft
deterrent system is turned off.
The hazard warning lights do not flash unless
the theft deterrent system has been properly
turned off.
When the doors are unlocked by pressing the
unlock button on the transmitter while the
theft-deterrent system is turned off, the hazard
warning lights will flash twice to indicate that
the system is turned off.
Refer to Theft-Deterrent System on page 3-29.
The system can be set to unlock all doors by
performing a single operation.
Refer to Personalization Features on page
10-8.
Panic button
If you witness from a distance someone
attempting to break into or damage your
vehicle, pressing the panic button will
activate the vehicle's alarm.
NOTE
The panic button will work whether any door
or the liftgate is open or closed.
Turning on the alarm
Pressing the panic button for 1 second or
more will trigger the alarm for about 2
minutes and 30 seconds, and the
following will occur:
l The horn sounds intermittently.
l The hazard warning lights flash.
Turning off the alarm
Press any button on the transmitter.
NOTE
Auto re-lock function
After unlocking with the transmitter, all doors
and the liftgate will automatically lock if one
of the doors or the liftgate is not opened within
about 30 seconds.
The time required for the doors to lock
automatically can be changed.
Refer to Personalization Features on page
10-8.
3-5
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page86
Friday, July 10 2015 5:25 PM
Knowing Your Mazda
Doors and Locks
Declaration of Conformity
Keyless entry system
3-6
Form No.8FA7-EA-15G
Black plate (86,1)
Mazda5_8FA7-EA-15G_Edition2 Page87
Friday, July 10 2015 5:25 PM
Black plate (87,1)
Knowing Your Mazda
Doors and Locks
qTransmitter Maintenance
If the buttons on the transmitter are
inoperable and the operation indicator
light does not flash, the battery may be
dead.
Replace with a new battery before the
transmitter becomes unusable.
2. Insert a screwdriver into the slot and
push the tab to remove the key from
the transmitter.
Tab
CAUTION
Ø Install the battery with the positive
pole ( ) facing down. Battery
leakage could occur if it is not
installed correctly.
Ø When replacing the battery, be
careful not to touch any of the
internal circuitry and electrical
terminals, bend the electrical
terminals, or get dirt in the
transmitter as the transmitter
could be damaged.
Ø There is the danger of explosion if
the battery is not correctly
replaced.
Ø Replace only with the same type
battery (CR1620 or equivalent).
Ø Dispose of used batteries
according to the following
instructions.
Ø Insulate the plus and minus
terminals of the battery using
cellophane or equivalent tape.
Ø Never disassemble.
Ø Never throw the battery into
fire and/or water.
Ø Never deform or crush.
3. Insert a screwdriver into the slot and
gently pry open the transmitter.
4. Remove the battery.
Replacing the transmitter battery
1. Unfold the key (page 3-2).
3-7
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page88
Friday, July 10 2015 5:25 PM
Black plate (88,1)
Knowing Your Mazda
Doors and Locks
5. Put in the new battery (CR1620 or
equivalent) with the positive pole (
facing down.
)
qService
If you have a problem with the keyless
entry system, consult an Authorized
Mazda Dealer.
If your transmitter is lost or stolen, consult
an Authorized Mazda Dealer as soon as
possible for a replacement and to make
the lost or stolen transmitter inoperative.
CAUTION
6. Align the front and back covers and
snap the transmitter shut.
7. Align the key with the transmitter as
shown in the figure, and insert the key
until a click sound is heard.
CAUTION
Insert the key into the transmitter
securely until a click sound is heard.
If it is not inserted securely, it could
detach from the transmitter.
3-8
Form No.8FA7-EA-15G
Radio equipment like this is governed
by laws in the United States.
Changes or modifications not
expressly approved by the party
responsible for compliance could void
the user's authority to operate the
equipment.
Mazda5_8FA7-EA-15G_Edition2 Page89
Friday, July 10 2015 5:25 PM
Black plate (89,1)
Knowing Your Mazda
Doors and Locks
Door Locks
WARNING
Always take all children and pets with
you or leave a responsible person with
them:
Leaving a child or a pet unattended
in a parked vehicle is dangerous. In
hot weather, temperatures inside a
vehicle can become high enough to
cause brain damage or even death.
Do not leave the key in your vehicle
with children and keep them in a place
where your children will not find or
play with them:
Leaving children in a vehicle with the
key is dangerous. This could result in
someone being badly injured or even
killed.
Keep all doors locked when driving:
Unlocked doors in a moving vehicle
are dangerous. Passengers can fall
out if a door is accidentally opened
and can more easily be thrown out in
an accident.
After closing the doors, always verify
that they are securely closed:
Doors not securely closed are
dangerous, if the vehicle is driven
with a door not securely closed, the
door could open unexpectedly
resulting in an accident.
Always confirm the safety around the
vehicle before opening a door:
Suddenly opening a door is
dangerous. A passing vehicle or a
pedestrian could be hit and cause an
accident.
CAUTION
Always confirm the conditions
around the vehicle before opening/
closing the doors and use caution
during strong winds or when parked
on an incline. Not being aware of the
conditions around the vehicle is
dangerous because fingers could get
caught in the door or a passing
pedestrian could be hit, resulting in
an unexpected accident or injury.
Always close all the windows and the
moonroof, lock the doors and take the
key with you when leaving your vehicle
unattended:
Leaving your vehicle unlocked is
dangerous as children could lock
themselves in a hot vehicle, which
could result in death. Also, a vehicle
left unlocked becomes an easy target
for thieves and intruders.
3-9
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page90
Friday, July 10 2015 5:25 PM
Black plate (90,1)
Knowing Your Mazda
Doors and Locks
qLocking, Unlocking with Key
The driver's door can be locked/unlocked
with the key.
Turn the key toward the front to unlock,
toward the back to lock.
To lock either front door with the doorlock knob from the outside, push the
door-lock knob to the lock position and
close the door (pulling the door handle is
not required).
Door-lock knob
Unlock
Lock
NOTE
qLocking, Unlocking with Transmitter
The doors can be locked/unlocked by
operating the keyless entry system
transmitter, refer to Keyless Entry System
(page 3-3).
qLocking, Unlocking with DoorLock Knob
When locking the doors using the door-lock
knob from the outside, be careful not to leave
the key inside the vehicle.
Sliding doors
To lock a sliding door from the inside,
slide the door-lock knob toward the front.
To unlock, slide it toward the back.
Lock
Front doors
To lock either front door from the inside,
push the door-lock knob.
To unlock, pull it out.
Unlock
Door-lock knob
Lock
Unlock
3-10
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page91
Friday, July 10 2015 5:25 PM
Black plate (91,1)
Knowing Your Mazda
Doors and Locks
To lock a sliding door with the door-lock
knob from the outside, slide the door-lock
knob toward the front to the lock position
and close the door (pulling the door
handle is not required).
Locking, unlocking with key
All doors and the liftgate lock
automatically when the driver's door is
locked with the key.
All doors and the liftgate unlock when the
driver's door is unlocked and the key is
held in the unlock position for one second
or longer.
Door-lock
knob
Unlock
Lock
qPower Door Locks
Vehicle lock-out prevention
The vehicle lock-out prevention feature
prevents you from locking yourself out of
the vehicle. With the key in the ignition
switch, all doors and the liftgate will
automatically unlock if they are locked
using the power door locks with any door
or the liftgate open.
NOTE
l
l
Holding the key in the unlocked position in
the driver's door lock for about a second
unlocks all doors and the liftgate. To unlock
only the driver's door, insert the key into the
driver's door lock and turn the key briefly
to the unlock position and then immediately
return it to the center position.
The system can be set to unlock all doors by
performing a single operation.
Refer to Personalization Features on page
10-8.
3-11
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page92
Friday, July 10 2015 5:25 PM
Black plate (92,1)
Knowing Your Mazda
Doors and Locks
Locking, unlocking with door-lock
switch
All doors and the liftgate lock
automatically when LOCK is pressed.
They all unlock when the unmarked part
of the door-lock switch is pressed.
Unlock
Lock
CAUTION
When opening/closing a sliding door,
follow the cautions below. If the
cautions are not heeded, hands, feet,
or even a head may be caught in a
door resulting in an injury.
Ø Use the door handle.
Ø Keep your hands, feet, and head
away from the sliding door
openings.
Ø Make sure that there is nothing
behind the sliding doors.
Ø Keep your hands and feet away
from the sliding door rails, arms
and pillars.
Pillar
Locking, unlocking with transmitter
All doors and the liftgate can be locked/
unlocked by operating the keyless entry
system transmitter, refer to Keyless Entry
System (page 3-3).
Door handle
qSliding Door Open/Close
WARNING
Do not leave a sliding door open while
parked on an incline:
Leaving a sliding door open is
dangerous. The door may open
unexpectedly resulting in injury.
3-12
Form No.8FA7-EA-15G
Rail
Arm
NOTE
When you leave the vehicle, stop the engine
and lock the doors. And do not put valuables
in your vehicle to prevent theft.
Mazda5_8FA7-EA-15G_Edition2 Page93
Friday, July 10 2015 5:25 PM
Black plate (93,1)
Knowing Your Mazda
Doors and Locks
Opening/closing from inside
To open, pull the inner door handle
toward the back.
To close, push the inner door handle
toward the front.
NOTE
When closing the sliding door from the fullyopened position and from outside the vehicle,
pull the outside door handle outward to
release the latch, and slide the door toward the
front.
Close
Open
Opening/closing from outside
Pull the outer door handle and slide the
door.
qRear Door Child Safety Locks
These locks are intended to help prevent
children from accidentally opening the
sliding doors. Use them both whenever a
child rides in the vehicle.
If you slide the child safety lock to the
lock position before closing that door, the
door cannot be opened from the inside.
The door can be opened only by pulling
the outside handle.
NOTE
The right sliding door cannot fully open when
the fuel-filler lid is open. Close the fuel filler
lid before opening the sliding door.
Unlock
Lock
3-13
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page94
Friday, July 10 2015 5:25 PM
Black plate (94,1)
Knowing Your Mazda
Doors and Locks
Liftgate
WARNING
Never allow a person to ride in the
luggage compartment:
Allowing a person to ride in the
luggage compartment is dangerous.
The person in the luggage
compartment could be seriously
injured or killed during sudden
braking or a collision.
Do not drive with the liftgate open:
Exhaust gas in the cabin of a vehicle
is dangerous. An open liftgate in a
moving vehicle will cause exhaust
gas to be drawn into the cabin. This
gas contains CO (carbon monoxide),
which is colorless, odorless, and
highly poisonous, and it can cause
loss of consciousness and death.
Moreover, an open liftgate could
cause occupants to fall out in an
accident.
Do not stack or leave loaded luggage
unsecured in the luggage
compartment:
Otherwise, the luggage may move or
collapse, resulting in injury or an
accident. In addition, do not load
luggage higher than the seatbacks. It
may affect the side or rear field of
view.
CAUTION
Ø Before opening the liftgate,
remove any snow and ice
accumulation on it. Otherwise, the
liftgate could close under the
weight of the snow and ice
resulting in injury.
Ø Be careful when opening/closing
the liftgate during strong winds. If
a strong gust blows against the
liftgate, it could close suddenly
resulting in injury.
Ø Fully open the liftgate and make
sure that it stays open. If the
liftgate is only opened partially, it
could slam shut by vibration or
wind gusts resulting in injury.
Ø When loading or unloading
luggage in the luggage
compartment, turn off the engine.
Otherwise, you could get burned
by the heat of the exhaust gas.
Ø Be careful not to apply excessive
force to the damper stay on the
liftgate such as by putting your
hand on the stay. Otherwise, the
damper stay may bend and affect
the liftgate operation.
Damper stay
3-14
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page95
Friday, July 10 2015 5:25 PM
Black plate (95,1)
Knowing Your Mazda
Doors and Locks
qLocking, Unlocking with Key
The liftgate can be locked/unlocked by
inserting the key into the driver's door key
cylinder, refer to Power Door Locks (page
3-11).
While the ignition is switched ON, the
liftgate can be opened only when the
vehicle is stopped with the parking brake
applied (manual transaxle), or with the
selector lever in the P position (automatic
transaxle).
qLocking, Unlocking with Transmitter
NOTE
l
The liftgate can be locked/unlocked by
operating the keyless entry system
transmitter, refer to Keyless Entry System
(page 3-3).
qLocking, Unlocking with DoorLock Switch
The liftgate can be locked/unlocked by
operating the door-lock switch, refer to
Power Door Locks (page 3-11).
qOpening and Closing the Liftgate
Opening the liftgate
Grasp the lower end of the liftgate, press
the electric liftgate opener on the liftgate,
and then raise the liftgate when the latch
releases.
l
When the liftgate latch is released by
pressing the electric liftgate opener button,
the liftgate raises slightly to allow it to be
opened. If the liftgate is not operated for a
certain period of time after the electric
liftgate opener button has been pressed, the
liftgate cannot be raised any more from its
slightly raised position. Press the electric
liftgate opener button again to fully open
the liftgate. To close the liftgate from its
slightly raised position, open it first by
pressing the electric liftgate opener button
and wait for 1 second or longer, then close
it.
If the liftgate is not fully closed, the driver
is notified by a warning indicated in the
instrument cluster.
The sound of the latch may be heard for a
few seconds after the electric liftgate
opener has been pressed, however, this does
not indicate a malfunction.
Electric liftgate
opener
3-15
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page96
Friday, July 10 2015 5:25 PM
Black plate (96,1)
Knowing Your Mazda
Doors and Locks
When the liftgate cannot be opened
If the vehicle battery is dead or there is a
malfunction in the electrical system and
the liftgate cannot be unlocked, perform
the following procedure as an emergency
measure to unlock it:
Closing the liftgate
To close, lower the liftgate slowly using
the liftgate grip recess, and then push the
liftgate closed using both hands.
Do not slam it. Pull up on the liftgate to
make sure it is secure.
1. Remove the cap on the interior surface
of the liftgate with a flathead
screwdriver.
Liftgate grip
recess
Cover
2. Turn the lever to the right to unlock the
liftgate.
Lever
After performing this emergency measure,
have the vehicle inspected at an
Authorized Mazda Dealer as soon as
possible.
3-16
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page97
Friday, July 10 2015 5:25 PM
Black plate (97,1)
Knowing Your Mazda
Doors and Locks
Power Windows
The ignition must be switched ON for the
power windows to operate.
WARNING
Make sure the opening is clear before
closing a window:
Closing power windows are
dangerous. A person's hands, head,
or even neck could be caught by the
window and result in serious injury
or even death.
This warning applies especially to
children.
Never allow children to play with
power window switches:
Power window switches that are not
locked with the power window lock
switch would allow children to
operate power windows
unintentionally which could result in
serious injury if a child's hands, head
or neck becomes caught by the
window.
CAUTION
To prevent burning out the fuse and
damaging the power window system,
do not open or close more than three
windows at once.
qOperating the Driver's Side
Power Window
Normal opening/closing
To open the window to the desired
position, lightly hold down the switch.
To close the window to the desired
position, lightly pull up the switch.
Master control switches
Close
Driver's window
Open
Auto-opening/closing
To fully open the window automatically,
press the switch completely down, then
release. The window will fully open
automatically.
To fully close the window automatically,
pull the switch completely up, then
release. The window will fully close
automatically.
To stop the window partway, pull or press
the switch in the opposite direction and
then release it.
3-17
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page98
Friday, July 10 2015 5:26 PM
Black plate (98,1)
Knowing Your Mazda
Doors and Locks
Power window system initialization
procedure
If the battery was disconnected during
vehicle maintenance, or for other reasons
(such as a switch continues to be operated
after the window is fully open/closed), the
window will not fully open and close
automatically. Carry out the following
procedure to resume operation:
1. Switch the ignition ON.
2. Press the switch and fully open the
window.
3. Pull up the switch to fully close the
window and continue holding the
switch for about 2 seconds after the
window fully closes.
Two-step down function
With the window completely closed, press
the switch lightly and the window will
open and stop about 3 cm (1 in) from the
top.
If you continue to press and hold the
switch, the window will resume opening
all the way.
NOTE
l
l
Pressing the power window switch once
when the window is fully closed will only
open it about 3 cm (1 in) to allow
convenient ventilation of the cabin.
The two-step down function can be
canceled.
Refer to Personalization Features on page
10-8.
WARNING
Make sure nothing blocks the window
just before it reaches the fully closed
position or while fully holding up the
power window switch:
Blocking the power window just
before it reaches the fully closed
position or while fully holding up the
power window switch is dangerous.
In this case, the jam-safe function
cannot prevent the window from
closing all the way. If fingers are
caught, serious injuries could occur.
NOTE
Depending on driving conditions, a closing
power window could stop and start opening
when the window feels a shock that is similar
to something blocking it.
In the event the jam-safe function activates and
the power window cannot be closed
automatically, pull and hold the switch and the
window will close.
Engine-off power window operation
The power window can be operated for
about 40 seconds after the ignition is
switched from ON to ACC or OFF with
all doors closed. If any door is opened, the
power window will be inoperable.
NOTE
l
l
Jam-safe window
If a person's hands, head or an object
blocks the window during the autoclosing operation, the window will stop
and open halfway.
3-18
Form No.8FA7-EA-15G
For engine-off operation of the power
window, the switch must be held up firmly
throughout window closure because the
auto-closing function will be inoperable.
The two-step down function is inoperable
during engine-off operation.
Mazda5_8FA7-EA-15G_Edition2 Page99
Friday, July 10 2015 5:26 PM
Black plate (99,1)
Knowing Your Mazda
Doors and Locks
qOperating the Passenger Power
Windows
The power windows may be operated
when the power window lock switch on
the driver's door is in the unlocked
position.
The passenger windows may be opened or
closed using the master control switches
on the driver's door.
Master control switches
Left rear window
qPower Window Lock Switch
This feature prevents all power windows
from operating, except the driver's power
window. Keep this switch in the locked
position while children are in the vehicle.
Locked position (button depressed):
Only the driver's power window can be
operated.
Unlocked position (button not
depressed):
All power windows on each door can be
operated.
Locked position
Front passenger's
window
Unlocked position
Right rear window
Power window lock switch
To open the window to the desired
position, hold down the switch.
To close the window to the desired
position, pull up the switch.
Close
Open
3-19
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page100
Friday, July 10 2015 5:26 PM
Black plate (100,1)
Knowing Your Mazda
Doors and Locks
Fuel-Filler Lid and Cap
WARNING
When removing the fuel-filler cap,
loosen the cap slightly and wait for any
hissing to stop. Then remove it:
Fuel spray is dangerous. Fuel can
burn skin and eyes and cause illness
if ingested. Fuel spray is released
when there is pressure in the fuel
tank and the fuel-filler cap is
removed too quickly.
Before refueling, stop the engine, and
always keep sparks and flames away
from the filler neck:
Fuel vapor is dangerous. It could be
ignited by sparks or flames causing
serious burns and injuries.
Additionally, use of the incorrect fuelfiller cap or not using a fuel-filler cap
may result in fuel leak, which could
result in serious burns or death in an
accident.
Do not continue refueling after the fuel
pump nozzle shuts off automatically:
Continuing to add fuel after the fuel
pump nozzle has shut off
automatically is dangerous because
overfilling the fuel tank may cause
fuel overflow or leakage. Fuel
overflow and leakage could damage
the vehicle and if the fuel ignites it
could cause a fire and explosion
resulting in serious injury or death.
3-20
Form No.8FA7-EA-15G
CAUTION
Always use only a genuine Mazda
fuel-filler cap or an approved
equivalent, available at an
Authorized Mazda Dealer. The wrong
cap can result in a serious
malfunction of the fuel and emission
control systems. It may also cause
the check engine light in the
instrument cluster to illuminate.
qFuel-Filler Lid
To open, pull up the remote fuel-filler lid
release.
Remote fuel-filler
lid release
NOTE
The fuel-filler lid cannot be opened when the
right-side sliding door is open. Close the
sliding door to open the fuel-filler lid.
qFuel-Filler Cap
To remove the fuel-filler cap, turn it
counterclockwise.
Attach the removed cap to the inner side
of the fuel lid.
Mazda5_8FA7-EA-15G_Edition2 Page101
Friday, July 10 2015 5:26 PM
Black plate (101,1)
Knowing Your Mazda
Doors and Locks
To close the fuel-filler cap, turn it
clockwise until a click is heard.
Hood
WARNING
Open
Close
Always check that the hood is closed
and securely locked:
A hood that is not closed and
securely locked is dangerous as it
could fly open while the vehicle is
moving and block the driver's vision
which could result in a serious
accident.
qOpening the Hood
CAUTION
Make sure the fuel-filler cap is
tightened securely. The check engine
light may illuminate when the cap is
not tightened securely. If the light
remains on (even after you have
tightened the cap securely, driven,
and restarted the engine several
times), it may indicate a different
problem. Contact an Authorized
Mazda Dealer as soon as possible.
1. With the vehicle parked, pull the
release handle to unlock the hood.
2. Insert your hand into the hood opening,
slide the hood latch lever, and lift the
hood.
3-21
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page102
Friday, July 10 2015 5:26 PM
Black plate (102,1)
Knowing Your Mazda
Doors and Locks
3. Grasp the support rod in the padded
area and secure it in the support rod
hole indicated by the arrow to hold the
hood open.
Pad
qClosing the Hood
1. Check under the hood area to make
certain all filler caps are in place and
all loose items (e.g. tools, oil
containers, etc.) have been removed.
2. Lift the hood, grasp the padded area on
the support rod, and secure the support
rod in the clip. Verify that the support
rod is secured in the clip before closing
the hood.
Clip
Support rod
Pad
3. Lower the hood slowly to a height of
about 20 cm (7.9 in) above its closed
position and then let it drop.
CAUTION
When closing the hood, do not push
it excessively such as by applying
your weight. Otherwise, the hood
could be deformed.
3-22
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page103
Friday, July 10 2015 5:26 PM
Black plate (103,1)
Knowing Your Mazda
Doors and Locks
Moonroof í
The moonroof can be opened or closed
electrically only when the ignition is
switched ON.
Slide switch
NOTE
Before washing your Mazda, make sure the
moonroof is completely closed so that water
does not get inside the cabin area. After
washing your Mazda or after it rains, wipe the
water off the moonroof before operating it to
avoid water penetration which could cause
rust and water damage to your headliner.
qTilt Operation
The rear of the moonroof can be tilted
open to provide more ventilation.
Tilt switch
WARNING
Do not let passengers stand up or
extend part of their body through the
open moonroof while the vehicle is
moving:
Extending the head, arms, or other
parts of the body through the
moonroof is dangerous. The head or
arms could hit something while the
vehicle is moving. This could cause
serious injury or death.
Make sure the opening is clear before
closing the moonroof:
A closing moonroof is dangerous. The
hands, head, or even neck of a
person, especially a child, could be
caught in it as it closes, causing
serious injury or even death.
To fully tilt automatically, momentarily
press the rear of the tilt switch.
To stop tilting partway, press any part of
the tilt or slide switch.
To close to the desired position, press the
front of the tilt or slide switch.
Tilt up
Close
Close
qSlide Operation
To fully open automatically, momentarily
press the rear of the slide switch.
To stop sliding partway, press any part of
the tilt or slide switch.
í
Some models.
Form No.8FA7-EA-15G
3-23
Mazda5_8FA7-EA-15G_Edition2 Page104
Friday, July 10 2015 5:26 PM
Black plate (104,1)
Knowing Your Mazda
Doors and Locks
To close to the desired position, press the
front of the tilt or slide switch.
qSunshade
The sunshade can be opened and closed
by hand.
The sunshade opens automatically when
the moonroof is opened, but must be
closed by hand.
Open
Close
Sunshade
Close
qPower Moonroof Re-set Procedure
If the battery is disconnected, the
moonroof will not operate. The moonroof
will not operate correctly until it is re-set.
Carry out the following procedure to reset the moonroof and resume operation:
1. Switch the ignition ON.
2. Press and hold the front of the SLIDE
switch with the moonroof closed
completely. The moonroof lowers
slightly and returns to its original
position when the re-setting is finished.
NOTE
Re-set cannot be performed with the moonroof
open. Close the moonroof completely before
re-setting.
3-24
Form No.8FA7-EA-15G
CAUTION
Ø The sunshade does not tilt. To
avoid damaging the sunshade, do
not push up on it.
Ø Do not close the sunshade while
the moonroof is opening. Trying to
force the sunshade closed could
damage it.
Mazda5_8FA7-EA-15G_Edition2 Page105
Friday, July 10 2015 5:26 PM
Black plate (105,1)
Knowing Your Mazda
Security System
Immobilizer System
The immobilizer system allows the engine
to start only with a key the system
recognizes.
If someone attempts to start the engine
with an unrecognized key, the engine will
not start, thereby helping to prevent the
theft of your vehicle.
If you have a problem with the
immobilizer system or the key, consult an
Authorized Mazda Dealer.
CAUTION
When starting the engine do not
allow the following, as the engine
may not start due to the electronic
signal from the ignition key not being
transmitted correctly.
Ø A key ring rests on the key grip.
CAUTION
Ø Radio equipment like this is
governed by laws in the United
States.
Changes or modifications not
expressly approved by the party
responsible for compliance could
void the user's authority to
operate the equipment.
Ø To avoid damage to the key, do
not:
Ø Drop the key.
Ø Get the key wet.
Ø Expose the key to any kind of
magnetic field.
Ø Expose the key to high
temperatures on places such as
the dashboard or hood, under
direct sunlight.
Ø Metal parts of other keys or metal
objects touch the key grip.
Ø Spare keys or keys for other
vehicles equipped with an
immobilizer system touch or come
near the key grip.
Ø Devices for electronic purchases, or
security passage which touch or
come near the key.
3-25
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page106
Friday, July 10 2015 5:26 PM
Knowing Your Mazda
Security System
NOTE
l
l
l
The keys carry a unique electronic code.
For this reason, and to assure your safety,
obtaining a replacement key requires some
waiting time. They are only available
through an Authorized Mazda Dealer.
Always keep a spare key, in case one is lost.
If a key is lost, contact an Authorized
Mazda Dealer as soon as possible.
If you lose a key, an Authorized Mazda
Dealer will reset the electronic codes of
your remaining keys and immobilizer
system. Bring all the remaining keys to an
Authorized Mazda Dealer to reset.
Starting the vehicle with a key that has not
been reset is not possible.
3-26
Form No.8FA7-EA-15G
Black plate (106,1)
Mazda5_8FA7-EA-15G_Edition2 Page107
Friday, July 10 2015 5:26 PM
Black plate (107,1)
Knowing Your Mazda
Security System
Declaration of Conformity
Immobilizer system
3-27
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page108
Friday, July 10 2015 5:26 PM
Black plate (108,1)
Knowing Your Mazda
Security System
qOperation
Arming
The system is armed when the ignition is
switched from ON to ACC or OFF.
The security indicator light in the
instrument cluster flashes every two
seconds until the system is disarmed.
NOTE
l
l
l
Disarming
The system is disarmed when the ignition
is switched ON with the correct ignition
key.
The security indicator light illuminates for
about three seconds and goes out.
If the engine does not start with the
correct ignition key, and the security
indicator light keeps illuminating or
flashing, the system may have a
malfunction. Consult an Authorized
Mazda Dealer.
l
If the security indicator light illuminates
and stays on or flashes when the ignition is
switched ON, the engine will not start.
Signals from a TV or radio station, or from
a transceiver or a mobile telephone, could
interfere with your immobilizer system. If
you are using the proper key and your
engine fails to start, check the security
indicator light. If it is flashing, remove the
ignition key and wait 2 seconds or more,
then reinsert it and try starting the engine
again. If it does not start after 3 or more
tries, contact an Authorized Mazda Dealer.
If the security indicator light flashes
continuously while you are driving, do not
shut off the engine. Go to an Authorized
Mazda Dealer and have it checked. If you
shut off the engine while the light is
flashing you will not be able to restart it.
Since the electronic codes are reset when
repairing the immobilizer system, the keys
are needed. Bring all the existing keys to an
Authorized Mazda Dealer.
qModification and Add-On
Equipment
Mazda cannot guarantee the immobilizer
system's operation if the system has been
modified or if any add-on equipment has
been installed.
CAUTION
To avoid damage to your vehicle, do
not modify the system or install any
add-on equipment to the immobilizer
system or the vehicle.
3-28
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page109
Friday, July 10 2015 5:26 PM
Black plate (109,1)
Knowing Your Mazda
Security System
Theft-Deterrent System í
If the theft deterrent system detects an
inappropriate entry into the vehicle, which
could result in the vehicle or its contents
being stolen, the alarm alerts the
surrounding area of an abnormality by
sounding the horn and flashing the hazard
warning lights.
Refer to Operation on page 3-29.
NOTE
l
l
The theft-deterrent system operates with the
key or the keyless entry system transmitter.
The system will not function unless it is
properly armed. To properly secure the
vehicle, always make sure all windows are
completely closed and all doors and the
liftgate are locked before leaving the
vehicle. Remember to take your key and
transmitter.
qOperation
System triggering conditions
The horn sounds intermittently and the
hazard warning lights flash for about 30
seconds when the system is triggered by
any one of the following:
l Forcing open a door, the hood or the
liftgate.
l Unlocking a door with the inside doorlock knob.
l Unlocking a door with the door lock
switch.
l Opening the hood by operating the
hood release handle.
l Switching the ignition ON without the
key.
If the system is triggered again, the lights
and horn will activate until a door or the
liftgate is unlocked with the key or with
the transmitter.
NOTE
If the battery goes dead while the theftdeterrent system is armed, the horn will
activate and the hazard warning lights will
flash when the battery is charged or replaced.
qHow to Arm the System
1. Close the windows and the moonroof í
securely.
2. Remove the key from the ignition
switch.
3. Make sure all the windows, the
moonroof í, and the hood are closed.
Close and lock all doors and the
liftgate from the outside using the key
or press the lock button on your
keyless entry system transmitter.
The hazard warning lights will flash
once.
The following method will also arm the
theft-deterrent system:
Close the hood and the liftgate. Press
the area on the door-lock switch
marked “LOCK” once. Close all doors.
The security indicator light in the
instrument panel flashes twice per
second for 20 seconds.
The theft deterrent system can also be
armed by activating the auto re-lock
function with all the doors, the liftgate and
the hood closed.
NOTE
Locking the doors with the inside door-lock
knob will not arm the system.
í
Some models.
Form No.8FA7-EA-15G
3-29
Mazda5_8FA7-EA-15G_Edition2 Page110
Friday, July 10 2015 5:26 PM
Black plate (110,1)
Knowing Your Mazda
Security System
4. After 20 seconds, the system is fully
armed.
The hazard warning lights will flash twice
to indicate that the system is turned off.
NOTE
NOTE
l
l
Auto re-lock function
After unlocking with the transmitter, all
doors and the liftgate will automatically
lock if one of the doors or the liftgate is not
opened within about 30 seconds.
The system will disarm if one of the
following operations takes place within 20
seconds after closing the hood and locking
all the doors and the liftgate:
Pressing the unlock button on the
transmitter.
Any door or the liftgate is opened.
Unlocking a door with the inside doorlock knob.
Unlocking a door with the door lock
switch.
Unlocking the driver's door with the key.
The hood is opened.
The key is inserted in the ignition switch.
The ignition is switched ON.
To rearm the system, do the arming
procedure again.
When the doors are locked by pressing the
lock button on the transmitter or using the
key while the theft-deterrent system is
armed, the hazard warning lights will flash
once to indicate that the system is armed.
The method for setting the theft-deterrent
system can be changed.
Refer to Personalization Features on page
10-8.
l
l
l
l
l
l
l
When the doors are unlocked by pressing the
unlock button on the transmitter or using the
key while the theft-deterrent system is turned
off, the hazard warning lights will flash twice
to indicate that the system is turned off.
qTo Stop an Alarm
A triggered alarm can be turned off by
any one of the following methods:
l Unlock the driver's door with the key.
l Press the unlock button on the keyless
entry system transmitter.
l The engine is started with the ignition
key.
NOTE
If you have any problem with the theftdeterrent system, consult an Authorized Mazda
Dealer.
l
l
l
qTo Turn off an Armed System
An armed system can be turned off by any
one of the following methods:
l Unlock the driver's door with the key.
l Press the unlock button on the keyless
entry system transmitter.
l Insert the key into the ignition switch
and switch the ignition ON.
3-30
Form No.8FA7-EA-15G
qModification and Add-On
Equipment
Mazda cannot guarantee the theftdeterrent system's operation if the system
has been modified or if any add-on
equipment has been installed.
CAUTION
To avoid damage to your vehicle, do
not modify the system or install any
add-on equipment to the theftdeterrent system or the vehicle.
Mazda5_8FA7-EA-15G_Edition2 Page111
Friday, July 10 2015 5:26 PM
Black plate (111,1)
Knowing Your Mazda
Security System
qTheft-Deterrent Labels
A label indicating that your vehicle is
equipped with a Theft-Deterrent System is
in the glove compartment.
Mazda recommends that you affix it to the
lower rear corner of a front door window.
3-31
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page112
Friday, July 10 2015 5:26 PM
Black plate (112,1)
Knowing Your Mazda
Steering Wheel and Mirrors
Steering Wheel
WARNING
Mirrors
qOutside Mirrors
Never adjust the steering wheel while
the vehicle is moving:
Adjusting the steering wheel while
the vehicle is moving is dangerous.
Moving it can very easily cause the
driver to abruptly turn to the left or
right. This can lead to loss of control
or an accident.
qSteering Wheel Adjustment
To change the angle or length of the
steering wheel:
1. Stop the vehicle, pull up the lock
release lever under the steering
column.
Check the mirror angles before driving.
Mirror type
Flat type (driver's side)
Flat surface mirror.
Convex type (front passenger side)
The mirror has single curvature on its
surface.
WARNING
Be sure to look over your shoulder
before changing lanes:
Changing lanes without taking into
account the actual distance of the
vehicle in the convex mirror is
dangerous. You could have a serious
accident. What you see in the convex
mirror is closer than it appears.
Power mirror
The ignition must be switched to ACC or
ON.
To adjust:
Lock release lever
2. Tilt the steering wheel and/or adjust the
steering column length to the desired
positions, push the lever down to lock
the column.
3. Push the wheel up and down to be
certain it's locked before driving.
3-32
Form No.8FA7-EA-15G
1. Press the left or right side of the
selector switch to choose the left or
right side mirror.
Mazda5_8FA7-EA-15G_Edition2 Page113
Friday, July 10 2015 5:26 PM
Black plate (113,1)
Knowing Your Mazda
Steering Wheel and Mirrors
2. Depress the mirror switch in the
appropriate direction.
Selector switch
qRearview Mirror
Rearview mirror adjustment
Before driving, adjust the rearview mirror
to center on the scene through the rear
window.
Mirror switch
After adjusting the mirror, lock the control
by placing the selector switch in the
center position.
Folding the mirror
Fold the outside mirror rearward until it is
flush with the vehicle.
Reducing glare from headlights
Adjust the mirror with the day/night lever
in the day position.
Push the lever forward for day driving.
Pull it back to reduce glare from
headlights.
Day/Night lever
WARNING
Always return the outside mirrors to
the driving position before you start
driving:
Driving with the outside mirrors
folded in is dangerous. Your rear view
will be restricted, and you could have
an accident.
Day
Night
3-33
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page114
Friday, July 10 2015 5:26 PM
Knowing Your Mazda
Steering Wheel and Mirrors
WARNING
Do not stack cargo or objects higher
than the seatbacks:
Cargo stacked higher than the
seatbacks is dangerous. It can block
your view in the rearview mirror,
which might cause you to hit another
car when changing lanes.
3-34
Form No.8FA7-EA-15G
Black plate (114,1)
Mazda5_8FA7-EA-15G_Edition2 Page115
Friday, July 10 2015 5:26 PM
4
Black plate (115,1)
Before Driving Your Mazda
Important information about driving your Mazda.
Fuel and Engine Exhaust Precautions ........................................
Fuel Requirements ....................................................................
Emission Control System ..........................................................
Engine Exhaust (Carbon Monoxide) .........................................
4-2
4-2
4-3
4-4
Before Starting the Engine ........................................................... 4-5
Before Getting In ...................................................................... 4-5
After Getting In ......................................................................... 4-5
Driving Tips ................................................................................... 4-6
Break-In Period ......................................................................... 4-6
Saving Fuel and Protection of the Environment ....................... 4-6
Hazardous Driving .................................................................... 4-7
Floor Mat .................................................................................. 4-7
Rocking the Vehicle .................................................................. 4-8
Winter Driving .......................................................................... 4-8
Driving In Flooded Area ......................................................... 4-10
Overloading ............................................................................ 4-10
Driving on Uneven Road ........................................................ 4-11
Towing ......................................................................................... 4-12
Trailer Towing ......................................................................... 4-12
4-1
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page116
Friday, July 10 2015 5:26 PM
Black plate (116,1)
Before Driving Your Mazda
Fuel and Engine Exhaust Precautions
Fuel Requirements
Vehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED FUEL,
which will reduce exhaust emissions and keep spark plug fouling to a minimum.
Your Mazda will perform best with fuel listed in the table.
Fuel
Regular unleaded fuel
Octane Rating* (Anti-knock index)
87 [ (R+M)/2 method] or above (91 RON or above)
* U.S. federal law requires that octane ratings be posted on gasoline station pumps.
Fuel with a rating lower than 87 octane (91 RON) will negatively affect the emission
control system performance and could also cause engine knocking and serious engine
damage.
CAUTION
Ø USE ONLY UNLEADED FUEL.
Leaded fuel is harmful to the catalytic converter and oxygen sensors and will lead
to deterioration of the emission control system and or failures.
Ø Your vehicle can only use oxygenated fuels containing no more than 10 % ethanol
by volume. Damage to your vehicle may occur when ethanol exceeds this
recommendation, or if the gasoline contains any methanol. Stop using gasohol of
any kind if your vehicle engine is performing poorly.
Ø Never add fuel system additives. Otherwise, the emission control system could be
damaged. Consult an Authorized Mazda Dealer for details.
Gasoline blended with oxygenates such as alcohol or ether compounds are generally
referred to as oxygenated fuels. The common gasoline blend that can be used with your
vehicle is ethanol blended at no more than 10%. Gasoline containing alcohol, such as
ethanol or methanol, may be marketed under the name “Gasohol”.
Vehicle damage and drivability problems resulting from the use of the following may not
be covered by the Mazda warranty.
l Gasohol containing more than 10% ethanol.
l Gasoline or gasohol containing methanol.
l Leaded fuel or leaded gasohol.
4-2
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page117
Friday, July 10 2015 5:26 PM
Black plate (117,1)
Before Driving Your Mazda
Fuel and Engine Exhaust Precautions
Emission Control System
Your vehicle is equipped with an emission control system (the catalytic converter is part of
this system) that enables your vehicle to comply with existing exhaust emissions
requirements.
WARNING
Never park over or near anything flammable:
Parking over or near anything flammable, such as dry grass, is dangerous. Even with
the engine turned off, the exhaust system remains very hot after normal use and
could ignite anything flammable. A resulting fire could cause serious injury or death.
CAUTION
Ignoring the following precautions could cause lead to accumulate on the catalyst
inside the converter or cause the converter to get very hot. Either condition will
damage the converter and cause poor performance.
Ø USE ONLY UNLEADED FUEL.
Ø Do not drive your Mazda with any sign of engine malfunction.
Ø Do not coast with the ignition switched off.
Ø Do not descend steep grades in gear with the ignition switched off.
Ø Do not operate the engine at high idle for more than 5 minutes.
Ø Do not tamper with the emission control system. All inspections and adjustments
must be made by a qualified technician.
Ø Do not push-start or pull-start your vehicle.
NOTE
Under U.S. federal law, any modification to the original-equipment emission control system before
the first sale and registration of a vehicle is subject to penalties. In some states, such modification
made on a used vehicle is also subject to penalties.
NOTE
While the engine is off, the sound of a valve opening and closing can be heard at the middle rear of
the vehicle, however this does not indicate an abnormality. Your vehicle has a self-checking device
and it operates while the engine is off.
4-3
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page118
Friday, July 10 2015 5:26 PM
Black plate (118,1)
Before Driving Your Mazda
Fuel and Engine Exhaust Precautions
Engine Exhaust (Carbon Monoxide)
WARNING
Do not drive your vehicle if you smell exhaust gas inside the vehicle:
Engine exhaust gas is dangerous. This gas contains carbon monoxide (CO), which is
colorless, odorless, and poisonous. When inhaled, it can cause loss of consciousness
and death. If you smell exhaust gas inside your vehicle, keep all windows fully open
and contact an Authorized Mazda Dealer immediately.
Do not run the engine when inside an enclosed area:
Running the engine inside an enclosed area, such as a garage, is dangerous. Exhaust
gas, which contains poisonous carbon monoxide, could easily enter the cabin. Loss
of consciousness or even death could occur.
Open the windows or adjust the heating or cooling system to draw fresh air when
idling the engine:
Exhaust gas is dangerous. When your vehicle is stopped with the windows closed
and the engine running for a long time even in an open area, exhaust gas, which
contains poisonous carbon monoxide, could enter the cabin. Loss of consciousness or
even death could occur.
Clear snow from underneath and around your vehicle, particularly the tail pipe,
before starting the engine:
Running the engine when a vehicle is stopped in deep snow is dangerous. The
exhaust pipe could be blocked by the snow, allowing exhaust gas to enter the cabin.
Because exhaust gas contains poisonous carbon monoxide, it could cause loss of
consciousness or even death to occupants in the cabin.
4-4
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page119
Friday, July 10 2015 5:26 PM
Black plate (119,1)
Before Driving Your Mazda
Before Starting the Engine
Before Getting In
l
l
l
l
Be sure the windows, outside mirrors,
and outside lights are clean.
Inspect inflation pressures and
condition of tires.
Look under the vehicle for any sign of
fluid leaks.
If you plan to back up, make sure
nothing is in your way.
NOTE
Engine oil, engine coolant, brake/clutch fluid,
washer fluid, and other fluid levels should be
inspected. See Maintenance, Section 8.
After Getting In
Are all doors closed and locked?
Is the seat adjusted properly?
l Are the inside and outside mirrors
adjusted?
l Is the steering wheel adjusted properly?
l Is everyone's seat belt fastened?
l Check all gauges.
l Check all warning lights when the
ignition is switched ON.
l Release the parking brake and make
sure the brake warning light goes off.
Always be thoroughly familiar with your
Mazda.
l
l
4-5
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page120
Friday, July 10 2015 5:26 PM
Black plate (120,1)
Before Driving Your Mazda
Driving Tips
Break-In Period
No special break-in is necessary, but a few
precautions in the first 1,000 km (600
miles) may add to the performance,
economy, and life of your Mazda.
l Do not race the engine.
l Do not maintain one constant speed,
either slow or fast, for a long period of
time.
l Do not drive constantly at full-throttle
or high engine rpm for extended
periods of time.
l Avoid unnecessary hard stops.
l Avoid full-throttle starts.
Saving Fuel and Protection
of the Environment
How you operate your Mazda determines
how far it will travel on a tank of fuel. Use
these suggestions to help save fuel and
reduce CO2.
l Avoid long warm-ups. Once the engine
runs smoothly, begin driving.
l Avoid fast starts.
l Drive at lower speeds.
l Anticipate when to apply the brakes
(avoid sudden braking).
l Keep the engine tuned. Follow the
maintenance schedule (page 8-4) and
have an Authorized Mazda Dealer
perform inspections and servicing.
l Use the air conditioner only when
necessary.
l Slow down on rough roads.
l Keep the tires properly inflated.
l Do not carry unnecessary weight.
l Do not rest your foot on the brake
pedal while driving.
l Keep the wheels in correct alignment.
l Keep windows closed at high speeds.
l Slow down when driving in crosswinds
and headwinds.
WARNING
Never stop the engine when going
down a hill:
Stopping the engine when going
down a hill is dangerous. This causes
the loss of power steering and power
brake control, and may cause
damage to the drivetrain. Any loss of
steering or braking control could
cause an accident.
4-6
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page121
Friday, July 10 2015 5:26 PM
Black plate (121,1)
Before Driving Your Mazda
Driving Tips
Hazardous Driving
WARNING
Be extremely careful if it is necessary to
downshift on slippery surfaces:
Downshifting into lower gear while
driving on slippery surfaces is
dangerous. The sudden change in tire
speed could cause the tires to skid.
This could lead to loss of vehicle
control and an accident.
Do not rely on ABS as a substitute for
safe driving:
The ABS cannot compensate for
unsafe and reckless driving, excessive
speed, tailgating (following another
vehicle too closely), driving on ice and
snow, and hydroplaning (reduced tire
friction and road contact because of
water on the road surface). You can
still have an accident.
When driving on ice or in water, snow,
mud, sand, or similar hazards:
l Be cautious and allow extra distance
for braking.
l Avoid sudden braking and sudden
maneuvering.
l Do not pump the brakes. Continue to
press down on the brake pedal.
Refer to Anti-Lock Brake System
(ABS) on page 5-8.
l If you get stuck, select a lower gear and
accelerate slowly. Do not spin the front
wheels.
l For more traction in starting on
slippery surfaces such as ice or packed
snow, use sand, rock salt, chains,
carpeting, or other nonslip material
under the front wheels.
NOTE
Use snow chains only on the front wheels.
Floor Mat
WARNING
Make sure the floor mats are hooked
on the retention pins to prevent them
from bunching up under the foot
pedals:
Using a floor mat that is not secured
is dangerous as it will interfere with
the accelerator and brake pedal
operation, which could result in an
accident.
Do not install two floor mats, one on
top of the other, on the driver's side:
Installing two floor mats, one on top
of the other, on the driver's side is
dangerous as the retention pins can
only keep one floor mat from sliding
forward.
If using a heavy duty floor mat for
winter use always remove the
original floor mat.
Loose floor mat(s) will interfere with
the foot pedal and could result in an
accident.
When setting a floor mat, position the
floor mat so that its eyelets are inserted
over the pointed end of the retention
posts.
4-7
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page122
Friday, July 10 2015 5:26 PM
Black plate (122,1)
Before Driving Your Mazda
Driving Tips
Rocking the Vehicle
WARNING
Do not spin the wheels at more than 56
km/h (35 mph), and do not allow
anyone to stand behind a wheel when
pushing the vehicle:
When the vehicle is stuck, spinning
the wheels at high speed is
dangerous. The spinning tire could
overheat and explode. This could
cause serious injuries.
CAUTION
Too much rocking may cause engine
overheating, transaxle failure, and
tire damage.
If you must rock the vehicle to free it from
snow, sand or mud, depress the
accelerator slightly and slowly move the
shift lever from 1 (D) to R.
4-8
Form No.8FA7-EA-15G
Winter Driving
Carry emergency gear, including tire
chains, window scraper, flares, a small
shovel, jumper cables, and a small bag
of sand or salt.
Ask an Authorized Mazda Dealer to
perform the following precautions:
l Have the proper ratio of antifreeze in
the radiator.
Refer to Engine Coolant on page 8-13.
l Inspect the battery and its cables. Cold
reduces battery capacity.
l Inspect the ignition system for damage
and loose connections.
l Use washer fluid made with
antifreeze―but do not use engine
coolant antifreeze for washer fluid
(page 8-17).
l Do not use the parking brake in
freezing weather as it may freeze.
Instead, shift to P with an automatic
transaxle and to 1 or R with a manual
transaxle. Block the rear wheels.
l Snow left on the windshield is
dangerous as it could obstruct vision.
Remove snow before driving.
l Do not apply excessive force to a
window scraper when removing ice or
frozen snow on the mirror glass and
windshield.
l Never use warm or hot water for
removing snow or ice from windows
and mirrors as it could result in the
glass cracking.
l Braking performance can be adversely
affected if snow or ice adheres to the
brake equipment. If this situation
occurs, drive the vehicle slowly,
releasing the accelerator pedal and
lightly applying the brakes several
times until the brake performance
returns to normal.
l
Mazda5_8FA7-EA-15G_Edition2 Page123
Friday, July 10 2015 5:26 PM
Black plate (123,1)
Before Driving Your Mazda
Driving Tips
qSnow Tires
qTire Chains
Use snow tires on all four wheels
Check local regulations before using tire
chains.
Do not go faster than 120 km/h (75 mph)
while driving with snow tires. Inflate
snow tires 30 kPa (0.3 kgf/cm2, 4.3 psi)
more than recommended on the tire
pressure label (driver's door frame), but
never more than the maximum cold-tire
pressure shown on the tires.
Your vehicle is originally equipped with
all season radials designed to be used all
year around. In some extreme climates
you may find it necessary to replace them
with snow tires during the winter months
to further improve traction on snow and
ice covered roads.
WARNING
Use only the same size and type tires
(snow, radial, or non-radial) on all four
wheels:
Using tires different in size or type is
dangerous. Your vehicle's handling
could be greatly affected and result
in an accident.
CAUTION
Check local regulations before using
studded tires.
NOTE
If your vehicle is equipped with the tire
pressure monitoring system, the system may
not function correctly when using tires with
steel wire reinforcement in the sidewalls (page
5-32).
CAUTION
Ø Chains may affect handling.
Ø Do not go faster than 50 km/h (30
mph) or the chain manufacturer's
recommended limit, whichever is
lower.
Ø Drive carefully and avoid bumps,
holes, and sharp turns.
Ø Avoid locked-wheel braking.
Ø Do not use chains on a temporary
spare tire; it may result in damage
to the vehicle and to the tire.
Ø Do not use chains on roads that
are free of snow or ice. The tires
and chains could be damaged.
Ø Chains may scratch or chip
aluminum wheels.
NOTE
If your vehicle is equipped with the tire
pressure monitoring system, the system may
not function correctly when using tire chains.
Install the chains on the front tires only.
Do not use chains on the rear tires.
Please consult an Authorized Mazda
Dealer.
Installing the chains
1. Remove the wheel covers, or the chain
bands will scratch them.
2. Secure the chains on the front tires as
tightly as possible. Always follow the
chain manufacturer's instructions.
3. Retighten the chains after driving 1/2
―1 km (1/4―1/2 mile).
4-9
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page124
Friday, July 10 2015 5:26 PM
Black plate (124,1)
Before Driving Your Mazda
Driving Tips
Driving In Flooded Area
WARNING
Dry wet brakes by driving very slowly
and applying the brakes lightly until
brake performance returns to normal:
Driving with wet brakes is
dangerous. Increased stopping
distance or the vehicle pulling to one
side when braking could result in a
serious accident. Light braking will
indicate whether the brakes have
been affected.
CAUTION
Do not drive the vehicle on flooded
roads as it could cause short
circuiting of electrical/electronic
parts, or engine damage or stalling
from water absorption. If the vehicle
has been immersed in water, consult
an Authorized Mazda Dealer.
4-10
Form No.8FA7-EA-15G
Overloading
WARNING
Be careful not to overload your vehicle:
The gross axle weight rating (GAWR)
and the gross vehicle weight rating
(GVWR) of your vehicle are on the
Motor Vehicle Safety Standard Label
on the driver's door frame. Exceeding
these ratings can cause an accident
or vehicle damage. You can estimate
the weight of your load by weighing
the items (or people) before putting
them in the vehicle.
Mazda5_8FA7-EA-15G_Edition2 Page125
Friday, July 10 2015 5:26 PM
Black plate (125,1)
Before Driving Your Mazda
Driving Tips
Driving on Uneven Road
Your vehicle's suspension and underbody can be damaged if driven on rough/uneven roads
or over speed bumps at excessive speeds. Use care and reduce speed when traveling on
rough/uneven roads or over speed bumps.
Use care not to damage the vehicle's underbody, bumpers or muffler(s) when driving under
the following conditions:
l Ascending or descending a slope with a sharp transition angle
l Ascending or descending a driveway or trailer ramp with a sharp transition angle
Your vehicle is equipped with low profile tires allowing class-leading performance and
handling. As a result, the sidewall of the tires are very thin and the tires and wheels can be
damaged if driven through potholes or on rough/uneven roads at excessive speeds. Use
care and reduce speed when traveling on rough/uneven roads or through potholes.
4-11
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page126
Friday, July 10 2015 5:26 PM
Before Driving Your Mazda
Towing
Trailer Towing
Your Mazda is not designed for towing.
Never tow a trailer with your Mazda.
4-12
Form No.8FA7-EA-15G
Black plate (126,1)
Mazda5_8FA7-EA-15G_Edition2 Page127
Friday, July 10 2015 5:26 PM
5
Black plate (127,1)
Driving Your Mazda
Explanation of instruments and controls.
Starting and Driving ..................................................................... 5-2
Ignition Switch .......................................................................... 5-2
Starting the Engine .................................................................... 5-3
Turning the Engine Off ............................................................. 5-4
Brake System ............................................................................ 5-5
Manual Transaxle Operation ................................................... 5-10
Automatic Transaxle Controls ................................................ 5-12
Power Steering ........................................................................ 5-20
Cruise Control í ...................................................................... 5-21
Traction Control System (TCS) .............................................. 5-24
Dynamic Stability Control (DSC) ........................................... 5-25
Tire Pressure Monitoring System í ......................................... 5-28
Parking Sensor System í ......................................................... 5-34
Instrument Cluster and Indicators ............................................ 5-40
Meters and Gauges .................................................................. 5-40
Warning/Indicator Lights and Beep Sounds ............................ 5-44
Warning/Indicator Lights ........................................................ 5-44
Beep Sounds ........................................................................... 5-57
Switches and Controls ................................................................
Lighting Control .....................................................................
Turn and Lane-Change Signals ...............................................
Fog Lights í ............................................................................
Windshield Wipers and Washer ..............................................
Rear Window Wiper and Washer ............................................
Rear Window Defogger ..........................................................
Horn ........................................................................................
Hazard Warning Flasher ..........................................................
í
Some models.
Form No.8FA7-EA-15G
5-59
5-59
5-63
5-64
5-64
5-68
5-69
5-70
5-70
5-1
Mazda5_8FA7-EA-15G_Edition2 Page128
Friday, July 10 2015 5:26 PM
Black plate (128,1)
Driving Your Mazda
Starting and Driving
WARNING
Ignition Switch
qIgnition Switch Positions
OFF
The power supply to electrical devices is
turned off. Only in this position can the
key be removed.
Do not stop the engine while the
vehicle is moving:
Stopping the engine while the vehicle
is moving for any reason other than
in an emergency is dangerous.
Stopping the engine while the vehicle
is moving will result in reduced
braking ability due to the loss of
power braking, which could cause an
accident and serious injury.
Before leaving the driver's seat, always
switch the ignition to OFF, set the
parking brake and make sure the shift
lever is in P (automatic transaxle) or in
1st gear or R (manual transaxle):
It is important to switch the ignition
to OFF even if you are not removing
the key from the ignition or leaving
the vehicle. Leaving the key in other
positions will disable some of the
vehicle security systems and run the
battery down.
Leaving the driver's seat without
switching the ignition to OFF, setting
the parking brake and shifting the
shift lever to P (automatic transaxle)
or to 1st gear or R (manual transaxle)
is dangerous. Unexpected vehicle
movement could occur. This could
cause an accident.
ACC (Accessory)
In this position, some electrical
accessories will operate.
ON
This is the normal running position after
the engine is started. Some indicator
lights/warning lights should be inspected
before the engine is started (page 5-44).
5-2
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page129
Friday, July 10 2015 5:26 PM
Black plate (129,1)
Driving Your Mazda
Starting and Driving
NOTE
When the ignition is switched ON, the sound of
the fuel pump motor operating near the fuel
tank can be heard. This does not indicate an
abnormality.
START
The engine is started in this position. It
will crank until you release the key. It
then returns to the ON position.
qIgnition Key Reminder
If the ignition is switched off or the
ignition is switched to ACC with the key
inserted, a continuous beep sound will be
heard when the driver's door is opened.
NOTE
A personalized function is available to change
the sound volume for the ignition key reminder.
Refer to Personalization Features on page
10-8.
Starting the Engine
NOTE
Engine-starting is controlled by the spark
ignition system.
This system meets all Canadian InterferenceCausing Equipment Standard requirements
regulating the impulse electrical field strength
of radio noise.
1. Occupants should fasten their seat
belts.
2. Make sure the parking brake is on.
3. Depress the brake pedal.
4. (Manual transaxle)
Depress the clutch pedal all the way
and shift into neutral.
Keep the clutch pedal depressed while
cranking the engine.
(Automatic transaxle)
Put the vehicle in park (P). If you must
restart the engine while the vehicle is
moving, shift into neutral (N).
NOTE
(Manual transaxle)
The starter will not operate unless the clutch is
depressed sufficiently.
(Automatic transaxle)
The starter will not operate if the shift lever is
not in P or N.
5. Switch the ignition to START and hold
(up to 10 seconds at a time) until the
engine starts.
CAUTION
Do not try the starter for more than
10 seconds at a time. If the engine
stalls or fails to start, wait 10 seconds
before trying again. Otherwise, you
may damage the starter and drain
the battery.
5-3
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page130
Friday, July 10 2015 5:26 PM
Black plate (130,1)
Driving Your Mazda
Starting and Driving
6. After starting the engine, let it idle for
about 10 seconds.
NOTE
l
l
l
In extremely cold weather or after the
vehicle has not been driven in several days,
let the engine warm up without operating
the accelerator.
Whether the engine is cold or warm, it
should be started without use of the
accelerator.
If the engine does not start the first time,
refer to Starting a Flooded Engine under
Emergency Starting. If the engine still does
not start, have your vehicle inspected by an
Authorized Mazda Dealer (page 7-16).
Turning the Engine Off
WARNING
Do not stop the engine while the
vehicle is moving:
Stopping the engine while the vehicle
is moving for any reason other than
in an emergency is dangerous.
Stopping the engine while the vehicle
is moving will result in reduced
braking ability due to the loss of
power braking, which could cause an
accident and serious injury.
1. Stop the vehicle completely.
2. (Manual transaxle)
Shift into neutral.
(Automatic transaxle)
Shift the shift lever to the P position.
3. Switch the ignition from ON to OFF.
CAUTION
When leaving the vehicle, make sure
the ignition is switched off.
NOTE
The cooling fan in the engine compartment
could turn on for a few minutes after the
ignition is switched from ON to OFF, whether
or not the A/C is on or off, to cool the engine
compartment quickly.
5-4
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page131
Friday, July 10 2015 5:26 PM
Black plate (131,1)
Driving Your Mazda
Starting and Driving
Brake System
qFoot Brake
Your Mazda has power-assisted brakes
that adjust automatically through normal
use.
Should power-assist fail, you can stop by
applying greater force than normal to the
brake pedal. But the distance required to
stop will be greater than usual.
WARNING
Do not coast with the engine stalled or
turned off, find a safe place to stop:
Coasting with the engine stalled or
turned off is dangerous. Braking will
require more effort, and the brake's
power-assist could be depleted if you
pump the brake. This will cause
longer stopping distances or even an
accident.
Shift to a lower gear when going down
steep hills:
Driving with your foot continuously
on the brake pedal or steadily
applying the brakes for long
distances is dangerous. This causes
overheated brakes, resulting in
longer stopping distances or even
total brake failure. This could cause
loss of vehicle control and a serious
accident. Avoid continuous
application of the brakes.
Dry off brakes that have become wet
by driving slowly, releasing the
accelerator pedal and lightly applying
the brakes several times until the brake
performance returns to normal:
Driving with wet brakes is
dangerous. Increased stopping
distance or the vehicle pulling to one
side when braking could result in a
serious accident. Light braking will
indicate whether the brakes have
been affected.
5-5
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page132
Friday, July 10 2015 5:26 PM
Black plate (132,1)
Driving Your Mazda
Starting and Driving
CAUTION
Ø Do not drive with your foot held
on the clutch pedal or brake pedal,
or hold the clutch pedal depressed
halfway unnecessarily. Doing so
could result in the following:
Ø The clutch and brake parts will
wear out more quickly.
Ø The brakes can overheat and
adversely affect brake
performance.
Ø Always depress the brake pedal
with the right foot. Applying the
brakes with the unaccustomed left
foot could slow your reaction time
to an emergency situation
resulting in insufficient braking
operation.
qParking Brake
WARNING
Before leaving the driver's seat, always
switch the ignition to OFF, set the
parking brake and make sure the shift
lever is in P (automatic transaxle) or in
1st gear or R (manual transaxle):
It is important to switch the ignition
to OFF even if you are not removing
the key from the ignition or leaving
the vehicle. Leaving the key in other
positions will disable some of the
vehicle security systems and run the
battery down.
Leaving the driver's seat without
switching the ignition to OFF, setting
the parking brake and shifting the
shift lever to P (automatic transaxle)
or to 1st gear or R (manual transaxle)
is dangerous. Unexpected vehicle
movement could occur. This could
cause an accident.
CAUTION
Driving with the parking brake on
will cause excessive wear of the brake
parts.
NOTE
Ø Wear shoes appropriate for driving
in order to avoid your shoe
contacting the brake pedal when
depressing the accelerator pedal.
5-6
Form No.8FA7-EA-15G
For parking in snow, refer to Winter Driving
(page 4-8) regarding parking brake use.
Mazda5_8FA7-EA-15G_Edition2 Page133
Friday, July 10 2015 5:26 PM
Black plate (133,1)
Driving Your Mazda
Starting and Driving
Setting the parking brake
Depress the brake pedal and then firmly
pull the parking brake lever fully upwards
with sufficient force to hold the vehicle in
a stationary position.
qBrake System Warning Light
This warning has the following functions:
Parking brake warning/Warning light
inspection
The light illuminates when the parking
brake is applied with the ignition switched
to START or ON. It turns off when the
parking brake is fully released.
Releasing the parking brake
Depress the brake pedal and pull the
parking brake lever upwards, then press
the release button. While holding the
button, lower the parking brake lever all
the way down to the released position.
Low brake fluid level warning
If the brake warning light remains
illuminated even though the parking brake
is released, the brake fluid may be low or
there could be a problem with the brake
system. Park the vehicle in a safe place
immediately and contact an Authorized
Mazda Dealer.
WARNING
Do not drive with the brake system
warning light illuminated. Contact an
Authorized Mazda Dealer to have the
brakes inspected as soon as possible:
Driving with the brake system
warning light illuminated is
dangerous. It indicates that your
brakes may not work at all or that
they could completely fail at any
time. If this light remains
illuminated, after checking that the
parking brake is fully released, have
the brakes inspected immediately.
5-7
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page134
Friday, July 10 2015 5:26 PM
Black plate (134,1)
Driving Your Mazda
Starting and Driving
CAUTION
NOTE
l
In addition, the effectiveness of the
braking may diminish so you may
need to depress the brake pedal more
strongly than normal to stop the
vehicle.
qAnti-Lock Brake System (ABS)
The ABS control unit continuously
monitors the speed of each wheel. If one
wheel is about to lock up, the ABS
responds by automatically releasing and
reapplying that wheel's brake.
l
Braking distances may be longer on loose
surfaces (snow or gravel, for example)
which usually have a hard foundation. A
vehicle with a normal braking system may
require less distance to stop under these
conditions because the tires will build up a
wedge of surface layer when the wheels
skid.
The sound of the ABS operating may be
heard when starting the engine or
immediately after starting the vehicle,
however, it does not indicate a malfunction.
qABS Warning Light
The driver will feel a slight vibration in
the brake pedal and may hear a chattering
noise from the brake system. This is
normal ABS system operation. Continue
to depress the brake pedal without
pumping the brakes.
WARNING
Do not rely on ABS as a substitute for
safe driving:
The ABS cannot compensate for
unsafe and reckless driving, excessive
speed, tailgating (following another
vehicle too closely), driving on ice and
snow, and hydroplaning (reduced tire
friction and road contact because of
water on the road surface). You can
still have an accident.
The warning light stays on for a few
seconds when the ignition is switched
ON.
If the ABS warning light stays on while
you're driving, the ABS control unit has
detected a system malfunction. If this
occurs, your brakes will function normally
as if the vehicle had no ABS.
Should this happen, consult an Authorized
Mazda Dealer as soon as possible.
NOTE
l
l
5-8
Form No.8FA7-EA-15G
When the engine is jump-started to charge
the battery, uneven rpm occurs and the ABS
warning light may illuminate. If this occurs,
it is the result of the weak battery and does
not indicate an ABS malfunction.
Recharge the battery.
The brake assist system does not operate
while the ABS warning light is illuminated.
Mazda5_8FA7-EA-15G_Edition2 Page135
Friday, July 10 2015 5:26 PM
Black plate (135,1)
Driving Your Mazda
Starting and Driving
qElectronic Brake Force
Distribution System Warning
If the electronic brake force distribution
control unit determines that some
components are operating incorrectly, the
control unit may illuminate the brake
system warning light and the ABS
warning light on simultaneously. The
problem is likely to be the electronic
brake force distribution system.
WARNING
Do not drive with both the ABS warning
light and brake warning light
illuminated. Have the vehicle towed to
an Authorized Mazda Dealer to have
the brakes inspected as soon as
possible:
Driving when the brake system
warning light and ABS warning light
are illuminated simultaneously is
dangerous.
When both lights are illuminated, the
rear wheels could lock more quickly
in an emergency stop than under
normal circumstances.
qBrake Assist
During emergency braking situations
when it is necessary to depress the brake
pedal with greater force, the brake assist
system provides braking assistance, thus
enhancing braking performance.
When the brake pedal is depressed hard or
depressed more quickly, the brakes apply
more firmly.
NOTE
l
l
l
When the brake pedal is depressed hard or
depressed more quickly, the pedal will feel
softer but the brakes will apply more firmly.
This is a normal effect of the brake assist
operation and does not indicate a
malfunction.
When the brake pedal is depressed hard or
depressed more quickly, a motor/pump
operation noise may be heard. This is a
normal effect of the brake assist and does
not indicate a malfunction.
The brake assist equipment does not
supersede the functionality of the vehicle's
main braking system.
5-9
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page136
Friday, July 10 2015 5:26 PM
Black plate (136,1)
Driving Your Mazda
Starting and Driving
Manual Transaxle Operation
qManual Transaxle Shift Pattern
Neutral position
The shift pattern of the transaxle is
conventional, as shown.
Depress the clutch pedal all the way down
while shifting; then release it slowly.
Your vehicle is equipped with a device to
prevent shifting to R (reverse) by mistake.
Push the shift lever downward and shift to
R.
WARNING
Do not use sudden engine braking on
slippery road surfaces or at high
speeds:
Shifting down while driving on wet,
snowy, or frozen roads, or while
driving at high speeds causes sudden
engine braking, which is dangerous.
The sudden change in tire speed
could cause the tires to skid. This
could lead to loss of vehicle control
and an accident.
Be sure to leave the shift lever in 1 or R
position and set the parking brake
when leaving the vehicle unattended:
Otherwise the vehicle could move
and cause an accident.
CAUTION
Ø Keep your foot off the clutch pedal
except when shifting gears. Also,
do not use the clutch to hold the
vehicle on an upgrade. Riding the
clutch will cause needless clutch
wear and damage.
Ø Do not apply any excessive lateral
force to the gear lever when
changing from 5th to 4th gear.
This could lead to the accidental
selection of 2nd gear, which can
result in damage to the transaxle.
Ø Make sure the vehicle comes to a
complete stop before shifting to R.
Shifting to R while the vehicle is
still moving may damage the
transaxle.
NOTE
If shifting to R is difficult, shift back into
neutral, release the clutch pedal, and try
again.
5-10
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page137
Friday, July 10 2015 5:26 PM
Black plate (137,1)
Driving Your Mazda
Starting and Driving
qRecommendations for Shifting
Upshifting
For normal acceleration, we recommend these shift
points.
Gear
1 to 2
2 to 3
3 to 4
4 to 5
5 to 6
Vehicle speed
25 km/h (15 mph)
42 km/h (26 mph)
60 km/h (37 mph)
75 km/h (46 mph)
79 km/h (49 mph)
For cruising
Gear
1 to 2
2 to 3
3 to 4
4 to 5
5 to 6
Vehicle speed
13 km/h (8 mph)
29 km/h (18 mph)
49 km/h (30 mph)
63 km/h (39 mph)
70 km/h (43 mph)
Downshifting
When you must slow down in heavy
traffic or on a steep upgrade, downshift
before the engine starts to overwork. This
reduces the chance of stalling and gives
better acceleration when you need more
speed.
On a steep downgrade, downshifting
helps maintain safe speed and prolongs
brake life.
5-11
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page138
Friday, July 10 2015 5:26 PM
Black plate (138,1)
Driving Your Mazda
Starting and Driving
Automatic Transaxle Controls
Various Lockouts:
Indicates that you must depress the brake pedal to shift (The ignition
must be switched to ACC or ON).
Indicates the shift lever can be shifted freely into any position.
NOTE
The Sport AT has an option that is not included in the traditional automatic transaxle giving the
driver the option of selecting each gear instead of leaving it to the transaxle to shift gears. Even if
you intend to use the automatic transaxle functions as a traditional automatic, you should also be
aware that you can inadvertently shift into manual shift mode and an inappropriate gear may be
retained as the vehicle speed increases. If you notice the engine speed going higher or hear the
engine racing, confirm you have not accidentally slipped into manual shift mode (page 5-15).
5-12
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page139
Friday, July 10 2015 5:26 PM
Black plate (139,1)
Driving Your Mazda
Starting and Driving
qTransaxle Ranges
The shift lever must be in P or N to
operate the starter.
P (Park)
P locks the transaxle and prevents the
front wheels from rotating.
WARNING
Always set the shift lever to P and set
the parking brake:
Only setting the shift lever to the P
position without using the parking
brake to hold the vehicle is
dangerous. If P fails to hold, the
vehicle could move and cause an
accident.
CAUTION
Ø Shifting into P, N or R while the
vehicle is moving can damage
your transaxle.
Ø Shifting into a driving gear or
reverse when the engine is running
faster than idle can damage the
transaxle.
R (Reverse)
In position R, the vehicle moves only
backward. You must be at a complete stop
before shifting to or from R, except under
rare circumstances as explained in
Rocking the Vehicle (page 4-8).
N (Neutral)
In N, the wheels and transaxle are not
locked. The vehicle will roll freely even
on the slightest incline unless the parking
brake or brakes are on.
WARNING
If the engine is running faster than idle,
do not shift from N or P into a driving
gear:
It's dangerous to shift from N or P
into a driving gear when the engine
is running faster than idle. If this is
done, the vehicle could move
suddenly, causing an accident or
serious injury.
Do not shift into N when driving the
vehicle:
Shifting into N while driving is
dangerous. Engine braking cannot be
applied when decelerating which
could lead to an accident or serious
injury.
CAUTION
Do not shift into N when driving the
vehicle. Doing so can cause transaxle
damage.
NOTE
Apply the parking brake or depress the brake
pedal before moving the shift lever from N to
prevent the vehicle from moving unexpectedly.
D (Drive)
D is the normal driving position. From a
stop, the transaxle will automatically shift
through a 5-gear sequence.
M (Manual)
M is the manual shift mode position.
Gears can be shifted up or down by
operating the shift lever.
Refer to Manual Shift Mode (page 5-15).
5-13
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page140
Friday, July 10 2015 5:26 PM
Black plate (140,1)
Driving Your Mazda
Starting and Driving
qActive Adaptive Shift (AAS)
qShift-Lock Override
Active Adaptive Shift (AAS)
automatically controls the transaxle shift
points to best suit the road conditions and
driver input. This improves driving feel.
If the driver accelerates rapidly, or
accelerates and decelerates rapidly by
operating the accelerator and brake pedal
for a certain period of time while the shift
lever is in the D position, AAS mode
could activate.
When cornering the vehicle, AAS mode
will hold the transaxle in the gear the
vehicle was in before entering the curve,
allowing the vehicle to be accelerated
from the same gear after exiting the curve.
AAS mode will maintain the transaxle in
the optimum gear and the driver may
sense that the transaxle is not shifting,
however this does not indicate an
abnormality.
If the shift lever will not move from P
using the proper shift procedure, continue
to hold down the pedal.
qShift-Lock System
3. Move the shift lever.
The shift-lock system prevents shifting
out of P unless the brake pedal is
depressed.
To shift from P:
1. Depress and hold the brake pedal.
2. Start the engine.
3. Move the shift lever.
NOTE
l
l
When the ignition is switched off, the shift
lever cannot be shifted from P.
To be sure the vehicle is in park, the
ignition key cannot be removed unless the
shift lever is in P.
5-14
Form No.8FA7-EA-15G
1. Remove the shift-lock override cover
using a cloth-wrapped flat head
screwdriver.
2. Insert a screwdriver and push it down.
Cover
Take the vehicle to an Authorized Mazda
Dealer to have the system checked.
Mazda5_8FA7-EA-15G_Edition2 Page141
Friday, July 10 2015 5:26 PM
Black plate (141,1)
Driving Your Mazda
Starting and Driving
qManual Shift Mode
This mode gives you the feel of driving a
manual transaxle vehicle by operating the
shift lever and allows you to control
engine rpm and torque to the front wheels
much like a manual transaxle when more
control is desired.
Gear position indicator
The numeral for the selected gear
illuminates.
Shift position indicator
To change to manual shift mode, shift the
lever from D to M.
D range/gear position indicator
NOTE
l
l
NOTE
Changing to manual shift mode while driving
will not damage the transaxle.
To return to automatic shift mode, shift
the lever from M to D.
NOTE
l
l
If you change to manual shift mode when
the vehicle is stopped, the gear will shift to
M1.
If you change to manual shift mode without
depressing the accelerator pedal when
driving in D range, 5th gear, the gear will
shift to M4.
If the gears cannot be shifted down when
driving at higher speeds, the gear position
indicator will flash twice to signal that the
gears cannot be shifted down (to protect the
transaxle).
If the automatic transaxle fluid (ATF)
temperature becomes too high, there is the
possibility that the transaxle will switch to
automatic shift mode, canceling manual
shift mode and turning off the gear position
indicator illumination. This is a normal
function to protect the AT. After the ATF
temperature has decreased, the gear
position indicator illumination turns back
on and driving in manual shift mode is
restored.
Indicators
Manual shift mode indicator
In manual shift mode, the “M” of the shift
position indicator in the instrument panel
illuminates.
5-15
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page142
Friday, July 10 2015 5:26 PM
Black plate (142,1)
Driving Your Mazda
Starting and Driving
Shifting
Manually Shifting up
(M1 → M2 → M3 → M4 → M5)
To shift up to a higher gear, move the shift
lever back ( ) once.
Manually Shifting down
(M5 → M4 → M3 → M2 → M1)
To shift down to a lower gear, move the
shift lever forward ( ) once.
WARNING
NOTE
l
l
l
When driving slowly, the gears may not
shift up.
In manual shift mode, gears do not shift up
automatically. Do not run the engine with
the tachometer needle in the RED ZONE. If
the tachometer needle enters the RED
ZONE, you may feel engine-braking
because the fuel delivery will be stopped to
protect the engine. However, this does not
indicate an abnormality.
When depressing the accelerator fully, the
transaxle will shift to a lower gear,
depending on vehicle speed.
Do not use engine braking on slippery
road surfaces or at high speeds:
Shifting down while driving on wet,
snowy, or frozen roads, or while
driving at high speeds causes sudden
engine braking, which is dangerous.
The sudden change in tire speed
could cause the tires to skid. This
could lead to loss of vehicle control
and an accident.
NOTE
l
l
l
5-16
Form No.8FA7-EA-15G
When driving at high speeds, the gear may
not shift down.
During deceleration, the gear may
automatically shift down depending on
vehicle speed.
When depressing the accelerator fully, the
transaxle will shift to a lower gear,
depending on vehicle speed.
Mazda5_8FA7-EA-15G_Edition2 Page143
Friday, July 10 2015 5:26 PM
Black plate (143,1)
Driving Your Mazda
Starting and Driving
Second gear fixed mode
When the selector lever is moved back
( ) while the vehicle speed is about 10
km/h (6 mph) or less, the transaxle is set
in the second gear fixed mode. The gear is
fixed in second while in this mode for
easier acceleration from a stop and driving
on slippery roads such as snow-covered
roads.
If the selector lever is moved back ( ) or
forward ( ) while in the second gear
fixed mode, the mode will be canceled.
5-17
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page144
Friday, July 10 2015 5:26 PM
Black plate (144,1)
Driving Your Mazda
Starting and Driving
Shift gear (shifting) speed limit
For each gear position while in the manual mode, the speed limit is set as follows: When
the selector lever is operated within the range of the speed limit, the gear is shifted.
Shift up
The gear does not shift up while the vehicle speed is lower than the speed limit.
Shift down
The gear does not shift down while the vehicle speed exceeds the speed limit.
If the vehicle speed exceeds the speed limit and the gear does not shift down, the gear
position indication flashes 2 times to notify the driver that the gear cannot be shifted.
Kickdown
When the accelerator pedal is depressed fully while driving, the gear shifts down.
Auto-shift down
The gear shifts down automatically depending on the vehicle speed during deceleration.
NOTE
If the vehicle comes to a stop while in the second gear fixed mode, the gear remains in second.
5-18
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page145
Friday, July 10 2015 5:26 PM
Black plate (145,1)
Driving Your Mazda
Starting and Driving
Recommendations for shifting
Upshifting
For normal acceleration and cruising, we
recommend these shift points.
Gear
M1 to M2
M2 to M3
M3 to M4
M4 to M5
Vehicle speed
25 km/h (15 mph)
41 km/h (25 mph)
65 km/h (40 mph)
73 km/h (45 mph)
Downshifting
When you must slow down in heavy
traffic or on a steep upgrade, downshift
before the engine starts to overwork. This
gives better acceleration when you need
more speed.
Climbing steep grades from a stop
To climb a steep grade from a stopped
position:
1. Depress the brake pedal.
2. Shift to D or M1, depending on the
load weight and grade steepness.
3. Release the brake pedal while
gradually accelerating.
Descending steep grades
When descending a steep grade, shift to
lower gears, depending on load weight
and grade steepness. Descend slowly,
using the brakes only occasionally to
prevent them from overheating.
On a steep downgrade, downshifting
helps maintain safe speed and prolongs
brake life.
qDriving Tips
WARNING
Do not allow the vehicle to move in
reverse on an up-slope while the
selector lever is in a forward gear
position, or move forward on a downslope while the selector lever is in the
reverse position.
Otherwise, the engine will stop,
causing the loss of the power brake
and power steering functions, and
make it difficult to control the vehicle
which could result in an accident.
Passing
For extra power when passing another
vehicle or climbing steep grades, depress
the accelerator fully. The transaxle will
shift to a lower gear, depending on vehicle
speed.
5-19
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page146
Friday, July 10 2015 5:26 PM
Black plate (146,1)
Driving Your Mazda
Starting and Driving
Power Steering
Power steering is only operable when the
engine is running. If the engine is off or if
the power steering system is inoperable,
you can still steer, but it requires more
physical effort.
If the steering feels stiffer than usual
during normal driving, consult an
Authorized Mazda Dealer.
CAUTION
Never hold the steering wheel to the
extreme left or right for more than 5
seconds with the engine running.
This could damage the power
steering system.
qPower Steering Malfunction
Indicator Light
This indicator light illuminates when the
ignition is switched ON, and turns off
when the engine is started.
5-20
Form No.8FA7-EA-15G
If the light remains illuminated after the
engine is started, or illuminates while
driving, turn off the engine after parking
in a safe place, and then start the engine
again.
If the light does not illuminate after
restarting the engine, this indicates that
the power steering is restored and normal
steering is possible.
If the light remains illuminated, the power
steering is still inoperable. Consult an
Authorized Mazda Dealer.
NOTE
l
l
The power steering system is inoperable
when the power steering malfunction
indicator light illuminates. Steering is
possible, but requires more physical effort.
Repeatedly jerking the steering wheel left
and right while the vehicle is stopped or
moving at slow speeds will cause the power
steering system to go into protective mode
which will make the steering feel heavy, but
this does not indicate a malfunction. If this
occurs, park the vehicle safely and wait a
few minutes for the system to return to
normal.
Mazda5_8FA7-EA-15G_Edition2 Page147
Friday, July 10 2015 5:26 PM
Black plate (147,1)
Driving Your Mazda
Starting and Driving
Cruise Control í
With cruise control, you can set and
automatically maintain any speed of more
than about 30 km/h (19 mph).
WARNING
Do not use the cruise control under the
following conditions:
Using the cruise control under the
following conditions is dangerous
and could result in loss of vehicle
control.
Ø Hilly terrain
Ø Steep inclines
Ø Heavy or unsteady traffic
Ø Slippery or winding roads
Ø Similar restrictions that require
inconsistent speed
qCruise Main Indicator Light
(Amber)/Cruise Set Indicator
Light (Green)
The indicator light has two colors.
Cruise Main Indicator Light (Amber)
The indicator light illuminates amber
when the ON switch is pressed and the
cruise control system is activated.
Cruise Set Indicator Light (Green)
The indicator light illuminates green when
a cruising speed has been set.
qActivation/Deactivation
To activate the system, press the ON
switch.
The cruise main indicator light
illuminates.
To deactivate the system, press the OFF
switch.
The cruise main indicator light turns off.
WARNING
Always turn off the cruise control
system when it is not in use:
Leaving the cruise control system in
an activation-ready state while the
cruise control is not in use is
dangerous as the cruise control could
unexpectedly activate if the
activation button is accidentally
pressed, and result in loss of vehicle
control and an accident.
qTo Set Speed
1. Activate the cruise control system by
pressing the ON switch.
2. Accelerate to the desired speed, which
must be more than 30 km/h (19 mph).
í
Some models.
Form No.8FA7-EA-15G
5-21
Mazda5_8FA7-EA-15G_Edition2 Page148
Friday, July 10 2015 5:26 PM
Black plate (148,1)
Driving Your Mazda
Starting and Driving
3. Set the cruise control by pressing the
cruise control SET /SET - switch up
or down at the desired speed. The
cruise control is set at the moment the
cruise control SET /SET - switch is
pressed up or down. Release the
accelerator pedal simultaneously.
Cruise control
switch
qTo Increase Cruising Speed
Follow either of these procedures.
To increase speed using cruise control
switch
Press up the cruise control SET
switch
and hold it. Your vehicle will accelerate.
Release the switch at the speed you want.
Cruise control
switch
NOTE
l
l
l
Release the cruise control switch at the
desired speed, otherwise the speed will
continue increasing while the switch is
pressed up, and continue decreasing while
it is pressed down (except when the
accelerator pedal is depressed).
On a steep grade, the vehicle may
momentarily slow down while ascending,
or speed up while descending.
Cruise control will turn off if the vehicle
speed decreases below about 23 km/h (14
mph) when cruise is activated, such as
when climbing a steep grade.
5-22
Form No.8FA7-EA-15G
Your vehicle has a tap-up feature that
allows you to increase your current speed
in increments of 1.6 km/h (1 mph) by a
momentary tap of the cruise control SET
switch. Multiple taps will increase
your vehicle speed 1.6 km/h (1 mph) for
each tap.
Mazda5_8FA7-EA-15G_Edition2 Page149
Friday, July 10 2015 5:26 PM
Black plate (149,1)
Driving Your Mazda
Starting and Driving
To increase speed using accelerator
pedal
Depress the accelerator pedal to accelerate
to the desired speed.
Press down or press up on the cruise
control SET /SET - switch and release
it immediately.
Your vehicle has a tap-down feature that
allows you to decrease your current speed
in decrements of 1.6 km/h (1 mph) by a
momentary tap of the cruise control SET switch. Multiple taps will decrease your
vehicle speed 1.6 km/h (1 mph) for each
tap.
qTo Resume Cruising Speed at
More Than 30 km/h (19 mph)
Cruise control
switch
NOTE
If some other method besides the OFF
switch was used to cancel cruising speed
(such as applying the brake pedal) and the
system is still activated, the most recent
set speed will automatically resume when
the RES switch is pressed.
If vehicle speed is below 30 km/h (19
mph), increase the vehicle speed up to 30
km/h (19 mph) or more and press the RES
switch.
Accelerate if you want to speed up temporarily
when the cruise control is on. Greater speed
will not interfere with or change the set speed.
Take your foot off the accelerator to return to
the set speed.
qTo Decrease Cruising Speed
Press down the cruise control SET switch and hold it. The vehicle will
gradually slow.
Release the switch at the speed you want.
qTo Cancel
Cruise control
switch
To cancel the system, use one of these
methods:
l Press the OFF switch.
l Slightly depress the brake pedal.
l Depress the clutch pedal (Manual
transaxle only).
5-23
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page150
Friday, July 10 2015 5:26 PM
Black plate (150,1)
Driving Your Mazda
Starting and Driving
l
Press the CANCEL switch.
Traction Control System
(TCS)
The Traction Control System (TCS)
enhances traction and safety by
controlling engine torque and braking.
When the TCS detects driving wheel
slippage, it lowers engine torque and
operates the brakes to prevent loss of
traction.
The system turns off when the ignition is
switched off.
NOTE
Cruise control will cancel at about 15 km/h (9
mph) below the preset speed (such as may
happen when climbing a long, steep grade).
This means that on a slick surface, the
engine adjusts automatically to provide
optimum power to the drive wheels,
limiting wheel spin and loss of traction.
WARNING
Do not rely on the traction control
system as a substitute for safe driving:
The traction control system (TCS)
cannot compensate for unsafe and
reckless driving, excessive speed,
tailgating (following another vehicle
too closely), and hydroplaning
(reduced tire friction and road
contact because of water on the road
surface). You can still have an
accident.
Use snow tires or tire chains and drive
at reduced speeds when roads are
covered with ice and/or snow:
Driving without proper traction
devices on snow and/or ice-covered
roads is dangerous. The traction
control system (TCS) alone cannot
provide adequate traction and you
could still have an accident.
NOTE
To turn off the TCS, press the DSC OFF switch
(page 5-26).
5-24
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page151
Friday, July 10 2015 5:26 PM
Black plate (151,1)
Driving Your Mazda
Starting and Driving
qTCS/DSC Indicator Light
This indicator light stays on for a few
seconds when the ignition is switched
ON. If the TCS or DSC is operating, the
indicator light flashes.
If the light stays on, the TCS or DSC may
have a malfunction and they may not
operate correctly. Take your vehicle to an
Authorized Mazda Dealer.
NOTE
l
l
In addition to the indicator light flashing, a
slight lugging sound will come from the
engine. This indicates that the TCS is
operating properly.
On slippery surfaces, such as fresh snow, it
will be impossible to achieve high rpm
when the TCS is on.
Dynamic Stability Control
(DSC)
The Dynamic Stability Control (DSC)
automatically controls braking and engine
torque in conjunction with systems such
as ABS and TCS to help control side slip
when driving on slippery surfaces, or
during sudden or evasive maneuvering,
enhancing vehicle safety.
Refer to ABS (page 5-8) and TCS (page
5-24).
DSC operation is possible at speeds
greater than 20 km/h (12 mph).
WARNING
Do not rely on the dynamic stability
control as a substitute for safe driving:
The dynamic stability control (DSC)
cannot compensate for unsafe and
reckless driving, excessive speed,
tailgating (following another vehicle
too closely), and hydroplaning
(reduced tire friction and road
contact because of water on the road
surface). You can still have an
accident.
5-25
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page152
Friday, July 10 2015 5:26 PM
Black plate (152,1)
Driving Your Mazda
Starting and Driving
CAUTION
Ø The DSC may not operate correctly
unless the following are observed:
Ø Use tires of the correct size
specified for your Mazda on all
four wheels.
Ø Use tires of the same
manufacturer, brand and tread
pattern on all four wheels.
Ø Do not mix worn tires.
Ø The DSC may not operate correctly
when tire chains are used or a
temporary spare tire is installed
because the tire diameter changes.
NOTE
After switching the ignition ON, a clicking
sound may be heard behind the dashboard.
This sound is the result of the DSC system selfcheck operation and does not indicate an
abnormality.
qTCS/DSC Indicator Light
qDSC OFF Indicator Light
This indicator light stays on for a few
seconds when the ignition is switched
ON.
It also illuminates when the DSC OFF
switch is pressed and TCS/DSC is
switched off (page 5-26).
If the light stays on when the TCS/DSC is
not switched off, take your vehicle to an
Authorized Mazda Dealer. The dynamic
stability control may have a malfunction.
qDSC OFF Switch
Press the DSC OFF switch to turn off the
TCS/DSC. The DSC OFF indicator light
illuminates.
This indicator light stays on for a few
seconds when the ignition is switched
ON. If the TCS or DSC is operating, the
indicator light flashes.
If the light stays on, the TCS or DSC may
have a malfunction and they may not
operate correctly. Take your vehicle to an
Authorized Mazda Dealer.
5-26
Form No.8FA7-EA-15G
Press the switch again to turn the TCS/
DSC back on. The DSC OFF indicator
light turns off.
Mazda5_8FA7-EA-15G_Edition2 Page153
Friday, July 10 2015 5:26 PM
Black plate (153,1)
Driving Your Mazda
Starting and Driving
NOTE
l
l
l
When DSC is on and you attempt to free the
vehicle when it is stuck, or drive it out of
freshly fallen snow, the TCS (part of the
DSC system) will activate. Depressing the
accelerator will not increase engine power
and freeing the vehicle may be difficult.
When this happens, turn off the TCS/DSC.
If the TCS/DSC is off when the engine is
turned off, it automatically activates when
the ignition is switched ON.
Leaving the TCS/DSC on will provide the
best stability.
5-27
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page154
Friday, July 10 2015 5:26 PM
Black plate (154,1)
Driving Your Mazda
Starting and Driving
Tire Pressure Monitoring System í
The tire pressure monitoring system (TPMS) monitors the pressure for each tire.
If tire pressure is too low in one or more tires, the system will inform the driver via the
warning light in the instrument panel and by the warning beep sound.
The tire pressure sensors installed on each wheel send tire pressure data by radio signal to
the receiver unit in the vehicle.
Tire pressure sensors
NOTE
When the ambient temperature is low due to seasonal changes, tire temperatures are also lower.
When the tire temperature decreases, the air pressure decreases as well. The TPMS warning light
may illuminate more frequently. Visually inspect the tires daily before driving, and check tire
pressures monthly with a tire pressure gauge. When checking tire pressures, use of a digital tire
pressure gauge is recommended.
TPMS does not alleviate your need to check the pressure and condition of all four tires
regularly.
5-28
í
Some models.
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page155
Friday, July 10 2015 5:26 PM
Black plate (155,1)
Driving Your Mazda
Starting and Driving
CAUTION
Each tire, including the spare (if provided), should be checked monthly when cold
and inflated to the inflation pressure recommended by the vehicle manufacturer on
the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a
different size than the size indicated on the vehicle placard or tire inflation pressure
label, you should determine the proper tire inflation pressure for those tires.)
As an added safety feature, your vehicle has been equipped with a tire pressure
monitoring system (TPMS) that illuminates a low tire pressure telltale when one or
more of your tires is significantly under-inflated. Accordingly, when the low tire
pressure telltale illuminates, you should stop and check your tires as soon as
possible, and inflate them to the proper pressure. Driving on a significantly underinflated tire causes the tire to overheat and can lead to tire failure. Under-inflation
also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling
and stopping ability.
Please note that the TPMS is not a substitute for proper tire maintenance, and it is
the driver's responsibility to maintain correct tire pressure, even if under-inflation
has not reached the level to trigger illumination of the TPMS low tire pressure
telltale.
Your vehicle has also been equipped with a TPMS malfunction indicator to indicate
when the system is not operating properly.
The TPMS malfunction indicator is combined with the low tire pressure telltale.
When the system detects a malfunction, the telltale will flash for approximately one
minute and then remain continuously illuminated. This sequence will continue upon
subsequent vehicle start-ups as long as the malfunction exists. When the
malfunction indicator is illuminated, the system may not be able to detect or signal
low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons,
including the installation of replacement or alternate tires or wheels on the vehicle
that prevent the TPMS from functioning properly. Always check the TPMS
malfunction telltale after replacing one or more tires or wheels on your vehicle to
ensure that the replacement or alternate tires and wheels allow the TPMS to
continue to function properly.
To avoid false readings, the system samples for a little while before indicating a
problem. As a result it will not instantaneously register a rapid tire deflation or blow
out.
NOTE
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
5-29
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page156
Friday, July 10 2015 5:26 PM
Black plate (156,1)
Driving Your Mazda
Starting and Driving
qTire Pressure Monitoring System
Warning Light
This warning light illuminates for a few
seconds when the ignition is switched
ON.
Thereafter, the warning light illuminates
and a beep is heard when tire pressure is
too low in one or more tires, and flashes
when there is a system malfunction.
WARNING
If the tire pressure monitoring system
warning light illuminates or flashes, or
the tire pressure warning beep sound is
heard, decrease vehicle speed
immediately and avoid sudden
maneuvering and braking:
If the tire pressure monitoring system
warning light illuminates or flashes,
or the tire pressure warning beep
sound is heard, it is dangerous to
drive the vehicle at high speeds, or
perform sudden maneuvering or
braking. Vehicle drivability could
worsen and result in an accident.
To determine if you have a slow leak
or a flat, pull over to a safe position
where you can check the visual
condition of the tire and determine if
you have enough air to proceed to a
place where air may be added and
the system monitored again by an
Authorized Mazda Dealer or a tire
repair station.
Do not ignore the TPMS Warning Light:
Ignoring the TPMS warning light is
dangerous, even if you know why it is
illuminated. Have the problem taken
care of as soon as possible before it
develops into a more serious
situation that could lead to tire
failure and a dangerous accident.
Warning light illuminates/Warning
beep sounds
When the warning light illuminates, and
the warning beep sound is heard (about 3
seconds), tire pressure is too low in one or
more tires.
5-30
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page157
Friday, July 10 2015 5:26 PM
Black plate (157,1)
Driving Your Mazda
Starting and Driving
Adjust the tire pressure to the correct tire
pressure. Refer to the specification charts
(page 10-6).
NOTE
l
CAUTION
When replacing/repairing the tires or
wheels or both, have the work done
by an Authorized Mazda Dealer, or
the tire pressure sensors may be
damaged.
l
l
Perform tire pressure adjustment when the
tires are cold. Tire pressure will vary
according to the tire temperature, therefore
let the vehicle stand for 1 hour or only drive
it 1.6 km (1 mile) or less before adjusting
the tire pressures. When pressure is
adjusted on hot tires to the cold inflation
pressure, the TPMS warning light/beep may
turn on after the tires cool and pressure
drops below specification.
Also, an illuminated TPMS warning light,
resulting from the tire air pressure dropping
due to cold ambient temperature, may turn
off if the ambient temperature rises. In this
case, it will also be necessary to adjust the
tire air pressures. If the TPMS warning
light illuminates due to a drop in tire air
pressure, make sure to check and adjust the
tire air pressures.
After adjusting the tire air pressures, it may
require some time for the TPMS warning
light to turn off. If the TPMS warning light
remains illuminated, drive the vehicle at a
speed of at least 25 km/h (16 mph) for 10
minutes, and then verify that it turns off.
Tires lose air naturally over time and the
TPMS cannot tell if the tires are getting too
soft over time or you have a flat. However,
when you find one low tire in a set of fourthat is an indication of trouble; you should
have someone drive the vehicle slowly
forward so you can inspect any low tire for
cuts and any metal objects sticking through
tread or sidewall. Put a few drops of water
in the valve stem to see if it bubbles
indicating a bad valve. Leaks need to be
addressed by more than simply refilling the
trouble tire as leaks are dangerous - take it
to an Authorized Mazda Dealer which has
all the equipment to fix tires, TPMS systems
and order the best replacement tire for your
vehicle.
5-31
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page158
Friday, July 10 2015 5:26 PM
Black plate (158,1)
Driving Your Mazda
Starting and Driving
If the warning light illuminates again even
after the tire pressures are adjusted, there
may be a tire puncture. Replace the
punctured tire with the temporary spare
tire (page 7-7).
NOTE
A tire pressure sensor is not installed to the
temporary spare tire. The warning light will
flash continuously while the temporary spare
tire is being used.
Warning light flashes
When the warning light flashes, there may
be a system malfunction. Consult an
Authorized Mazda Dealer.
qSystem Error Activation
When the warning light flashes, there may
be a system malfunction. Consult an
Authorized Mazda Dealer.
A system error activation may occur in
the following cases:
l When there is equipment or a device
near the vehicle using the same radio
frequency as that of the tire pressure
sensors.
l When using the following devices in
the vehicle that may cause radio
interference with the receiver unit.
A digital device such as a personal
computer.
A current converter device such as a
DC-AC converter.
l When excess snow or ice adheres to
the vehicle, especially around the
wheels.
l When the tire pressure sensor batteries
are exhausted.
l When using a wheel with no tire
pressure sensor installed.
l When using tires with steel wire
reinforcement in the side walls.
l When using tire chains.
qTires and Wheels
CAUTION
When inspecting or adjusting the tire
air pressures, do not apply excessive
force to the stem part of the wheel
unit. The stem part could be
damaged.
Changing tires and wheels
The following procedure allows the
TPMS to recognize a tire pressure sensor's
unique ID signal code whenever tires or
wheels are changed, such as changing to
and from winter tires.
NOTE
Each tire pressure sensor has a unique ID
signal code. The signal code must be
registered with the TPMS before it can work.
The easiest way to do it is to have an
Authorized Mazda Dealer change your tire and
complete ID signal code registration.
When having tires changed at an
Authorized Mazda Dealer
When an Authorized Mazda Dealer
changes your vehicle's tires, they will
complete the tire pressure sensor ID signal
code registration.
l
l
5-32
Form No.8FA7-EA-15G
When changing tires yourself
If you or someone else changes tires, you
or someone else can also undertake the
steps for the TPMS to complete the ID
signal code registration.
1. After tires have been changed, switch
the ignition ON, then back to ACC or
OFF.
2. Wait for about 15 minutes.
Mazda5_8FA7-EA-15G_Edition2 Page159
Friday, July 10 2015 5:26 PM
Black plate (159,1)
Driving Your Mazda
Starting and Driving
3. After about 15 minutes, drive the
vehicle at a speed of at least 25 km/h
(16 mph) for 10 minutes and the tire
pressure sensor ID signal code will be
registered automatically.
l
NOTE
l
NOTE
If the vehicle is driven within about 15 minutes
of changing tires, the tire pressure monitoring
system warning light will flash because the
sensor ID signal code would not have been
registered. If this happens, park the vehicle for
about 15 minutes, after which the sensor ID
signal code will register upon driving the
vehicle for 10 minutes.
A new tire pressure sensor is installed
to a new wheel.
l
The tire pressure sensor ID signal code
must be registered when a new tire pressure
sensor is purchased. For purchase of a tire
pressure sensor and registration of the tire
pressure sensor ID signal code, consult an
Authorized Mazda Dealer.
When reinstalling a previously removed tire
pressure sensor to a wheel, replace the
grommet (seal between valve body/sensor
and wheel) for the tire pressure sensor.
Replacing tires and wheels
CAUTION
Ø When replacing/repairing the tires
or wheels or both, have the work
done by an Authorized Mazda
Dealer, or the tire pressure sensors
may be damaged.
Ø The wheels equipped on your
Mazda are specially designed for
installation of the tire pressure
sensors. Do not use non-genuine
wheels, otherwise it may not be
possible to install the tire pressure
sensors.
Be sure to have the tire pressure sensors
installed whenever tires or wheels are
replaced.
When having a tire or wheel or both
replaced, the following types of tire
pressure sensor installations are possible.
l The tire pressure sensor is removed
from the old wheel and installed to the
new one.
l The same tire pressure sensor is used
with the same wheel. Only the tire is
replaced.
5-33
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page160
Friday, July 10 2015 5:26 PM
Black plate (160,1)
Driving Your Mazda
Starting and Driving
Parking Sensor System í
The parking sensor system uses ultrasonic sensors to detect obstructions around the vehicle
while parking the vehicle in a garage or during parallel parking when the vehicle is driven
at a speed of about 10 km/h (6 mph) or less. The system is equipped with an assist device
to notify the driver of the approximate distance from the vehicle to the surrounding
obstruction using a beep sound.
Rear sensor
Rear corner sensor
WARNING
Do not rely completely on the parking sensor system and be sure to confirm the
safety around your vehicle visually when driving.
This system can assist the driver in operating the vehicle in the forward and
backward directions while parking. The detection ranges of the sensors are limited,
therefore, driving the vehicle while relying only on the system may cause an accident.
Always confirm the safety around your vehicle visually when driving.
5-34
í
Some models.
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page161
Friday, July 10 2015 5:26 PM
Black plate (161,1)
Driving Your Mazda
Starting and Driving
NOTE
l
l
l
Do not install any accessories within the detection ranges of the sensors. It may affect the system
operation.
Depending on the type of obstruction and the surrounding conditions, the detection range of a
sensor may narrow, or the sensors may not be able to detect obstructions.
The system may not operate normally under the following conditions:
Mud, ice, or snow is adhering to the sensor area (Returns to normal operation when removed).
The sensor area is frozen (Returns to normal operation when the ice is thawed).
The sensor is covered by a hand.
The sensor is excessively shocked.
The vehicle is excessively tilted.
Under extremely hot or cold weather conditions.
The vehicle is driven on bumps, inclines, gravel, or grass covered roads.
Anything which generates ultrasound is near the vehicle, such as another vehicle's horn, the
engine sound of a motorcycle, the air brake sound of a large-sized vehicle, or another vehicle's
sensors.
The vehicle is driven in heavy rain or in road conditions causing water-splash.
A commercially-available fender pole or an antenna for a radio transmitter is installed to the
vehicle.
The vehicle is moving towards a tall or square curbstone.
An obstruction is too close to the sensor.
Obstructions under the bumper may not be detected. Obstructions that are lower than the bumper
or thin which may have been initially detected but are no longer detected as the vehicle
approaches more closely.
The following types obstructions may not be detected:
Thin objects such as wire or rope
Things which absorb sonic waves easily such as cotton or snow
Angular shaped objects
Very tall objects, and those which are wide at the top
Small, short objects
Always have the system inspected at an Authorized Mazda Dealer if any shock is applied to the
bumpers, even in a minor accident. If the sensors are deviated, they cannot detect obstructions.
The system may have a malfunction if the beep does not operate or the indicator light does not
illuminate when the park assist sensors switch is turned on. Consult an Authorized Mazda Dealer.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
5-35
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page162
Friday, July 10 2015 5:26 PM
Black plate (162,1)
Driving Your Mazda
Starting and Driving
qSensor Detection Range
The sensors detect obstructions within the following range.
A: About 50 cm (About 20 in)
B: About 150 cm (About 59.1 in)
Rear corner sensor detection range
A
B
Rear sensor detection range
qPark Assist Sensor System Operation
The switch can be activated when the ignition is switched ON, the shift lever is in any
position except reverse (R), and the vehicle speed is about 10 km/h (6 mph) or less.
When the parking sensor switch is pressed, a beep sound is heard and the indicator light in
the switch illuminates.
Indicator light
NOTE
If the system is cancelled, it will not restore automatically even when the vehicle speed is decreased to
10 km/h (6 mph) or less.
5-36
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page163
Friday, July 10 2015 5:26 PM
Black plate (163,1)
Driving Your Mazda
Starting and Driving
Sensor detection condition
The system can be used when the ignition is switched ON and the Park Assist Sensor
Switch has been turned on.
The system will then operate when the shift lever is placed in reverse (R).
The sensors detect obstructions under the following conditions:
Sensor
Rear Sensor
Rear Corner Sensor
Condition
The shift lever is in reverse (R).
The shift lever is in reverse (R), and the vehicle speed is about 10 km/h (6 mph) or less.
The system is cancelled under the following conditions:
l The vehicle speed is 10 km/h (6 mph) or more.
l The parking sensor switch is pressed while the parking sensor is in operation.
5-37
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page164
Friday, July 10 2015 5:26 PM
Black plate (164,1)
Driving Your Mazda
Starting and Driving
qParking Sensor Warning Beep
Obstruction detection sound
The beeper sounds as follows while the system is operating.
Rear Sensor
Distance between vehicle and obstruction
Rear Sensor
Approx. 150―60 cm (59.0―24.0 in)
Beeper sound*1
Slow intermittent sound
Approx. 60―45 cm (23―18 in)
Medium intermittent sound
Approx. 45―35 cm (17―14 in)
Fast intermittent sound
Within approx. 35 cm (14 in)
Continuous sound
*1 The speed of the intermittent sound increases as the vehicle approaches the obstruction.
5-38
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page165
Friday, July 10 2015 5:26 PM
Black plate (165,1)
Driving Your Mazda
Starting and Driving
Rear Corner Sensor
Distance between vehicle and obstruction
Rear Corner Sensor
Approx. 50―37 cm (19―15 in)
Beeper sound*1
Medium intermittent sound
Approx. 37―25 cm (14.0―9.9 in)
Fast intermittent sound
Within approx. 25 cm (9.8 in)
Continuous sound
*1 The speed of the intermittent sound increases as the vehicle approaches the obstruction.
Parking sensor malfunction sound
In the following cases, a problem with the system may be indicated.
Condition
The beep sound is not heard
even if the shift lever is shifted
to the reverse (R).
l
Beep sound is heard and the
indicator light in the parking
sensor switch flashes.
The intermittent sound of the
buzzer is heard five times.
Action
l
The system may have a malfunction. Have the vehicle inspected at an
Authorized Mazda Dealer as soon as possible.
Remove any foreign material from the sensor area. If the system does not
recover, have the vehicle inspected at an Authorized Mazda Dealer.
NOTE
The beep sound which indicates a system malfunction may not be heard if the ambient temperature is
extremely cold, or mud, ice, or snow adheres to the sensor area. Remove any foreign material from
the sensor area.
5-39
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page166
Friday, July 10 2015 5:26 PM
Black plate (166,1)
Driving Your Mazda
Instrument Cluster and Indicators
Meters and Gauges
Speedometer ...................................................................................................... page 5-41
Odometer, Trip Meter and Trip Meter Selector .................................................. page 5-41
Tachometer ........................................................................................................ page 5-42
Fuel Gauge ........................................................................................................ page 5-42
Dashboard Illumination ..................................................................................... page 5-43
5-40
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page167
Friday, July 10 2015 5:26 PM
Black plate (167,1)
Driving Your Mazda
Instrument Cluster and Indicators
qSpeedometer
The speedometer indicates the speed of
the vehicle.
qOdometer, Trip Meter and Trip
Meter Selector
The display mode can be changed
between trip meter A and trip meter B by
pressing the selector while one of them is
displayed. The selected mode will be
displayed.
Odometer
Trip meter A
Press the selector
Trip meter selector
Odometer
Trip meter B
Press the selector
NOTE
Odometer
Trip meter
When the ignition is switched to ACC or the
ignition is switched off, the odometer or trip
meters cannot be displayed, however, pressing
the selector button can inadvertently switch the
trip meters or reset them during an
approximate ten-minute period in the following
cases:
l After the ignition is switched to ACC or the
ignition is switched off from ON.
l After the driver's door is opened.
Odometer
The odometer records the total distance
the vehicle has been driven.
Trip meter
The trip meter can record the total
distance of two trips. One is recorded in
trip meter A, and the other is recorded in
trip meter B.
5-41
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page168
Friday, July 10 2015 5:26 PM
Black plate (168,1)
Driving Your Mazda
Instrument Cluster and Indicators
For instance, trip meter A can record the
distance from the point of origin, and trip
meter B can record the distance from
where the fuel tank is filled.
When trip meter A is selected, pressing
the selector again within one second will
change to trip meter B mode.
When trip meter A is selected, TRIP A
will be displayed. When trip meter B is
selected, TRIP B will be displayed.
qTachometer
The tachometer shows engine speed in
thousands of revolutions per minute
(rpm).
CAUTION
Do not run the engine with the
tachometer needle in the RED ZONE.
This may cause severe engine
damage.
The trip meter records the total distance
the vehicle is driven until the meter is
again reset. Return it to “0.0” by holding
the selector depressed for 1 second or
more. Use this meter to measure trip
distances and to compute fuel
consumption.
Red zone
NOTE
l
l
Only the trip meters record tenths of
kilometers (miles).
The trip record will be erased when:
The power supply is interrupted (blown
fuse or the battery is disconnected).
The vehicle is driven over 999.9 km
(mile).
l
l
qFuel Gauge
The fuel gauge shows approximately how
much fuel is remaining in the tank when
the ignition is switched ON.
We recommend keeping the tank over 1/4
full.
Full
1/4 Full
5-42
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page169
Friday, July 10 2015 5:26 PM
Black plate (169,1)
Driving Your Mazda
Instrument Cluster and Indicators
If the gauge indicates that the fuel level is
near E, refuel as soon as possible.
NOTE
l
l
After refueling, it may require some time for
the indicator to stabilize. In addition, the
indicator may deviate while driving on a
slope or curve since the fuel moves in the
tank.
The direction of the arrow (
) indicates
that the fuel-filler lid is on the right side of
the vehicle.
qDashboard Illumination
Rotate the knob to adjust the brightness of
the instrument cluster and other
illuminations in the dashboard.
NOTE
l
l
The brightness of dashboard illuminations
can be adjusted when the headlight switch
is in the
or
position.
When the dashboard illumination
brightness cannot be adjusted any more, a
beep sound will be heard.
When driving on snowy or foggy roads,
or in other situations when the instrument
cluster or information display's visibility
is reduced due to glare from surrounding
brightness, cancel the illumination
dimmer and increase the illumination
intensity.
To cancel the illumination dimmer, press
the dashboard illumination knob.
NOTE
l
l
This symbol ( ) indicates the knob to
adjust the brightness of the dashboard
illumination.
If the illumination dimmer is cancelled, the
instrument cluster and the information
display will not dim when the headlight
switch is turned to the
or
position
again. Press the dashboard illumination
knob to activate the illumination dimmer.
Dim
Bright
Canceling the illumination dimmer
When the headlight switch is in the
or
position, the illumination of the
instrument cluster and the information
display dims.
5-43
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page170
Friday, July 10 2015 5:26 PM
Black plate (170,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Warning/Indicator Lights
Warning/Indicator lights will appear in any of the highlighted areas
Signal
Warning/Indicator Lights
Page
Brake System Warning Light
5-46
Malfunction Warning Light
5-47
Charging System Warning Light
5-48
Engine Oil Pressure Warning Light
5-48
Check Engine Light
5-49
High Engine Coolant Temperature Warning Light (Red)
5-49
ABS Warning Light
5-47
5-44
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page171
Friday, July 10 2015 5:26 PM
Black plate (171,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Signal
Warning/Indicator Lights
Page
Air Bag/Front Seat Belt Pretensioner System Warning Light
5-50
Low Fuel Warning Light
5-50
Check Fuel Cap Warning Light
5-50
Seat Belt Warning Light
5-51
Door-Ajar Warning Light
5-51
Low Washer Fluid Level Warning Light
5-51
Automatic Transaxle Warning Light
5-51
Tire Pressure Monitoring System Warning Light
5-52
Security Indicator Light
5-54
Headlight High-Beam Indicator Light
5-54
Shift Position Indicator Light
5-54
Low Engine Coolant Temperature Indicator Light (Blue)
5-55
TCS/DSC Indicator Light
5-55
DSC OFF Indicator Light
5-55
Cruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green)
5-55
Lights-On Indicator Light
5-56
5-45
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page172
Friday, July 10 2015 5:26 PM
Black plate (172,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Signal
Warning/Indicator Lights
Page
Power Steering Malfunction Indicator Light
5-56
Turn Signal/Hazard Warning Indicator Lights
5-56
qBrake System Warning Light
This warning has the following functions:
Parking brake warning/Warning light
inspection
The light illuminates when the parking
brake is applied with the ignition switched
to START or ON. It turns off when the
parking brake is fully released.
Low brake fluid level warning
If the brake warning light remains
illuminated even though the parking brake
is released, the brake fluid may be low or
there could be a problem with the brake
system. Park the vehicle in a safe place
immediately and contact an Authorized
Mazda Dealer.
5-46
Form No.8FA7-EA-15G
WARNING
Do not drive with the brake system
warning light illuminated. Contact an
Authorized Mazda Dealer to have the
brakes inspected as soon as possible:
Driving with the brake system
warning light illuminated is
dangerous. It indicates that your
brakes may not work at all or that
they could completely fail at any
time. If this light remains
illuminated, after checking that the
parking brake is fully released, have
the brakes inspected immediately.
CAUTION
In addition, the effectiveness of the
braking may diminish so you may
need to depress the brake pedal more
strongly than normal to stop the
vehicle.
Mazda5_8FA7-EA-15G_Edition2 Page173
Friday, July 10 2015 5:26 PM
Black plate (173,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
qMalfunction Warning Light
If the ABS warning light stays on while
you're driving, the ABS control unit has
detected a system malfunction. If this
occurs, your brakes will function normally
as if the vehicle had no ABS.
Should this happen, consult an Authorized
Mazda Dealer as soon as possible.
NOTE
When the ignition is switched ON, the
malfunction warning light illuminates and
then turns off after a few seconds.
The light stays on if the brake switch has
a malfunction. Consult an Authorized
Mazda Dealer.
WARNING
Do not drive the vehicle with the
malfunction warning light illuminated.
Driving with the malfunction
warning light illuminated is
dangerous because the brake lights
and engine control system may not
operate normally due to a brake
switch malfunction which could lead
to an accident. Have your vehicle
inspected by an Authorized Mazda
Dealer.
qABS Warning Light
l
l
When the engine is jump-started to charge
the battery, uneven rpm occurs and the ABS
warning light may illuminate. If this occurs,
it is the result of the weak battery and does
not indicate an ABS malfunction.
Recharge the battery.
The brake assist system does not operate
while the ABS warning light is illuminated.
qElectronic Brake Force
Distribution System Warning
If the electronic brake force distribution
control unit determines that some
components are operating incorrectly, the
control unit may illuminate the brake
system warning light and the ABS
warning light on simultaneously. The
problem is likely to be the electronic
brake force distribution system.
The warning light stays on for a few
seconds when the ignition is switched
ON.
5-47
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page174
Friday, July 10 2015 5:26 PM
Black plate (174,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
WARNING
Do not drive with both the ABS warning
light and brake warning light
illuminated. Have the vehicle towed to
an Authorized Mazda Dealer to have
the brakes inspected as soon as
possible:
Driving when the brake system
warning light and ABS warning light
are illuminated simultaneously is
dangerous.
When both lights are illuminated, the
rear wheels could lock more quickly
in an emergency stop than under
normal circumstances.
qCharging System Warning Light
qEngine Oil Pressure Warning Light
This warning light illuminates when the
ignition is switched ON and turns off
when the engine is started.
This warning light indicates low engine
oil pressure.
CAUTION
Do not run the engine if the oil
pressure is low. Otherwise, it could
result in extensive engine damage.
If the light illuminates while driving:
1. Drive to the side of the road and park
off the right-of-way on level ground.
This warning light illuminates when the
ignition is switched ON and turns off
when the engine is started.
If the warning light illuminates while
driving, it indicates a malfunction of the
alternator or of the charging system.
Drive to the side of the road and park off
the right-of-way. Consult an Authorized
Mazda Dealer.
CAUTION
Do not continue driving when the
charging system warning light is
illuminated because the engine could
stop unexpectedly.
5-48
Form No.8FA7-EA-15G
2. Turn off the engine and wait 5 minutes
for the oil to drain back into the oil
pan.
3. Inspect the engine oil level (page 8-12).
If it's low, add the appropriate amount
of engine oil while being careful not to
overfill.
CAUTION
Do not run the engine if the oil level
is low. Otherwise, it could result in
extensive engine damage.
4. Start the engine and check the warning
light.
Mazda5_8FA7-EA-15G_Edition2 Page175
Friday, July 10 2015 5:26 PM
Black plate (175,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
If the light remains illuminated even
though the oil level is normal or after
adding oil, stop the engine immediately
and have your vehicle towed to an
Authorized Mazda Dealer.
qHigh Engine Coolant Temperature
Warning Light (Red)
qCheck Engine Light
This indicator light illuminates when the
ignition is switched ON and turns off
when the engine is started.
If this light illuminates while driving, the
vehicle may have a problem. It is
important to note the driving conditions
when the light illuminated and consult an
Authorized Mazda Dealer.
The check engine light may illuminate in
the following cases:
l The fuel tank level being very low or
approaching empty.
l The engine's electrical system has a
problem.
l The emission control system has a
problem.
l The fuel-filler cap is missing or not
tightened securely.
When the ignition is switched ON, the
light illuminates momentarily and then
turns off.
The light flashes when the engine coolant
temperature is extremely high, and
illuminates when the engine coolant
temperature increases further.
Handling Procedure
Flashing light
Drive slowly to reduce engine load.
Illuminated light
This indicates the possibility of
overheating. Park the vehicle in a safe
place immediately and stop the engine.
Refer to Overheating (page 7-14).
CAUTION
Do not drive the vehicle with the high
engine coolant temperature warning
light illuminated. Otherwise, it could
result in damage to the engine.
If the check engine light remains on or
flashes continuously, do not drive at high
speeds and consult an Authorized Mazda
Dealer as soon as possible.
5-49
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page176
Friday, July 10 2015 5:26 PM
Black plate (176,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
qAir Bag/Front Seat Belt
Pretensioner System Warning Light
If the air bag/front seat belt pretensioner
system is working properly, the warning
light illuminates when the ignition is
switched ON or after the engine is
cranked. The warning light turns off after
a specified period of time.
A system malfunction is indicated if the
warning light constantly flashes,
constantly illuminates or does not
illuminate at all when the ignition is
switched ON. If any of these occur,
consult an Authorized Mazda Dealer as
soon as possible. The system may not
operate in an accident.
WARNING
Never tamper with the air bag/
pretensioner systems and always have
an Authorized Mazda Dealer perform
all servicing and repairs:
Self-servicing or tampering with the
systems is dangerous. An air bag/
pretensioner could accidentally
activate or become disabled causing
serious injury or death.
5-50
Form No.8FA7-EA-15G
qLow Fuel Warning Light
This warning light signals that the fuel
tank will soon be empty.
Refuel as soon as possible.
qCheck Fuel Cap Warning Light
This warning light illuminates for a few
seconds when the ignition is switched
ON.
If the check fuel cap warning light
illuminates while driving, the fuel-filler
cap may not be installed properly. Stop
the engine and reinstall the fuel-filler cap.
Refer to Fuel-Filler Cap on page 3-20.
Mazda5_8FA7-EA-15G_Edition2 Page177
Friday, July 10 2015 5:26 PM
Black plate (177,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
qSeat Belt Warning Light
With warning light for front
passenger's seat
The seat belt warning light illuminates if
the driver or front passenger's seat is
occupied and the seat belt is not fastened
when the ignition switched ON.
Without warning light for front
passenger's seat
qLow Washer Fluid Level
Warning Light í
This warning light indicates that little
washer fluid remains. Add fluid (page
8-17).
qAutomatic Transaxle Warning
Light (Automatic Transaxle)
The seat belt warning light illuminates if
the driver's seat belt is not fastened when
the ignition switched ON.
qDoor-Ajar Warning Light
This warning light stays on for a few
seconds when the ignition is switched
ON.
The light illuminates when the transaxle
has a problem.
This warning light illuminates when any
door or liftgate is not securely closed.
Close the door or liftgate securely before
driving the vehicle.
CAUTION
If the automatic transaxle warning
light illuminates, the transaxle has
an electrical problem. Continuing to
drive your Mazda in this condition
could cause damage to your
transaxle. Consult an Authorized
Mazda Dealer as soon as possible.
í
Some models.
Form No.8FA7-EA-15G
5-51
Mazda5_8FA7-EA-15G_Edition2 Page178
Friday, July 10 2015 5:26 PM
Black plate (178,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
qTire Pressure Monitoring System
(TPMS) Warning Light í
This warning light illuminates for a few
seconds when the ignition is switched
ON.
Thereafter, the warning light illuminates
and a beep is heard when tire pressure is
too low in one or more tires, and flashes
when there is a system malfunction.
WARNING
If the tire pressure monitoring system
warning light illuminates or flashes, or
the tire pressure warning beep sound is
heard, decrease vehicle speed
immediately and avoid sudden
maneuvering and braking:
If the tire pressure monitoring system
warning light illuminates or flashes,
or the tire pressure warning beep
sound is heard, it is dangerous to
drive the vehicle at high speeds, or
perform sudden maneuvering or
braking. Vehicle drivability could
worsen and result in an accident.
To determine if you have a slow leak
or a flat, pull over to a safe position
where you can check the visual
condition of the tire and determine if
you have enough air to proceed to a
place where air may be added and
the system monitored again by an
Authorized Mazda Dealer or a tire
repair station.
Do not ignore the TPMS Warning Light:
Ignoring the TPMS warning light is
dangerous, even if you know why it is
illuminated. Have the problem taken
care of as soon as possible before it
develops into a more serious
situation that could lead to tire
failure and a dangerous accident.
Warning light illuminates/Warning
beep sounds
When the warning light illuminates, and
the warning beep sound is heard (about 3
seconds), tire pressure is too low in one or
more tires.
5-52
í
Some models.
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page179
Friday, July 10 2015 5:26 PM
Black plate (179,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Adjust the tire pressure to the correct tire
pressure. Refer to the specification charts
(page 10-6).
NOTE
l
CAUTION
When replacing/repairing the tires or
wheels or both, have the work done
by an Authorized Mazda Dealer, or
the tire pressure sensors may be
damaged.
l
l
Perform tire pressure adjustment when the
tires are cold. Tire pressure will vary
according to the tire temperature, therefore
let the vehicle stand for 1 hour or only drive
it 1.6 km (1 mile) or less before adjusting
the tire pressures. When pressure is
adjusted on hot tires to the cold inflation
pressure, the TPMS warning light/beep may
turn on after the tires cool and pressure
drops below specification.
Also, an illuminated TPMS warning light,
resulting from the tire air pressure dropping
due to cold ambient temperature, may turn
off if the ambient temperature rises. In this
case, it will also be necessary to adjust the
tire air pressures. If the TPMS warning
light illuminates due to a drop in tire air
pressure, make sure to check and adjust the
tire air pressures.
After adjusting the tire air pressures, it may
require some time for the TPMS warning
light to turn off. If the TPMS warning light
remains illuminated, drive the vehicle at a
speed of at least 25 km/h (16 mph) for 10
minutes, and then verify that it turns off.
Tires lose air naturally over time and the
TPMS cannot tell if the tires are getting too
soft over time or you have a flat. However,
when you find one low tire in a set of fourthat is an indication of trouble; you should
have someone drive the vehicle slowly
forward so you can inspect any low tire for
cuts and any metal objects sticking through
tread or sidewall. Put a few drops of water
in the valve stem to see if it bubbles
indicating a bad valve. Leaks need to be
addressed by more than simply refilling the
trouble tire as leaks are dangerous - take it
to an Authorized Mazda Dealer which has
all the equipment to fix tires, TPMS systems
and order the best replacement tire for your
vehicle.
5-53
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page180
Friday, July 10 2015 5:26 PM
Black plate (180,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
If the warning light illuminates again even
after the tire pressures are adjusted, there
may be a tire puncture. Replace the
punctured tire with the temporary spare
tire (page 7-7).
qHeadlight High-Beam Indicator
Light
NOTE
A tire pressure sensor is not installed to the
temporary spare tire. The warning light will
flash continuously while the temporary spare
tire is being used.
Warning light flashes
When the warning light flashes, there may
be a system malfunction. Consult an
Authorized Mazda Dealer.
qSecurity Indicator Light
This light indicates one of two things:
l The high-beam headlights are on.
l The turn signal lever is in the flash-topass position.
qShift Position Indicator Light
(Automatic Transaxle)
This indicates the selected shift position.
This indicator light starts flashing every
two seconds when the ignition is switched
from ON to ACC and the immobilizer
system is armed.
The light stops flashing when the ignition
is switched ON with the correct ignition
key.
At this time, the immobilizer system is
disarmed and the light illuminates for
about three seconds and then turns off.
Gear position indicator
If the engine does not start with the
correct ignition key, and the security
indicator light keeps illuminating or
flashing, the system may have a
malfunction. Consult an Authorized
Mazda Dealer.
5-54
Form No.8FA7-EA-15G
In manual mode, the “M” of the shift
position indicator illuminates and the
numeral for the selected gear displays in
the gear position indicator.
Mazda5_8FA7-EA-15G_Edition2 Page181
Friday, July 10 2015 5:26 PM
Black plate (181,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
qLow Engine Coolant Temperature
Indicator Light (Blue)
NOTE
l
l
When the ignition is switched ON, the
light illuminates momentarily and then
turns off.
The light illuminates continuously when
the engine coolant temperature is low and
turns off after the engine is warm.
In addition to the indicator light flashing, a
slight lugging sound will come from the
engine. This indicates that the TCS is
operating properly.
On slippery surfaces, such as fresh snow, it
will be impossible to achieve high rpm
when the TCS is on.
qDSC OFF Indicator Light
NOTE
If the low engine coolant temperature indicator
light remains illuminated after the engine has
been sufficiently warmed up, the temperature
sensor could have a malfunction. Consult an
Authorized Mazda Dealer.
qTCS/DSC Indicator Light
This indicator light stays on for a few
seconds when the ignition is switched
ON.
It also illuminates when the DSC OFF
switch is pressed and TCS/DSC is
switched off (page 5-26).
If the light stays on when the TCS/DSC is
not switched off, take your vehicle to an
Authorized Mazda Dealer. The dynamic
stability control may have a malfunction.
This indicator light stays on for a few
seconds when the ignition is switched
ON. If the TCS or DSC is operating, the
indicator light flashes.
If the light stays on, the TCS or DSC may
have a malfunction and they may not
operate correctly. Take your vehicle to an
Authorized Mazda Dealer.
qCruise Main Indicator Light
(Amber)/Cruise Set Indicator
Light (Green) í
The indicator light has two colors.
í
Some models.
Form No.8FA7-EA-15G
5-55
Mazda5_8FA7-EA-15G_Edition2 Page182
Friday, July 10 2015 5:26 PM
Black plate (182,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Cruise Main Indicator Light (Amber)
The indicator light illuminates amber
when the ON switch is pressed and the
cruise control system is activated.
Cruise Set Indicator Light (Green)
The indicator light illuminates green when
a cruising speed has been set.
qLights-On Indicator Light
If the light remains illuminated after the
engine is started, or illuminates while
driving, turn off the engine after parking
in a safe place, and then start the engine
again.
If the light does not illuminate after
restarting the engine, this indicates that
the power steering is restored and normal
steering is possible.
If the light remains illuminated, the power
steering is still inoperable. Consult an
Authorized Mazda Dealer.
NOTE
l
This indicator light illuminates when the
exterior lights and dashboard illumination
are on.
qPower Steering Malfunction
Indicator Light
l
The power steering system is inoperable
when the power steering malfunction
indicator light illuminates. Steering is
possible, but requires more physical effort.
Repeatedly jerking the steering wheel left
and right while the vehicle is stopped or
moving at slow speeds will cause the power
steering system to go into protective mode
which will make the steering feel heavy, but
this does not indicate a malfunction. If this
occurs, park the vehicle safely and wait a
few minutes for the system to return to
normal.
qTurn Signal/Hazard Warning
Indicator Lights
This indicator light illuminates when the
ignition is switched ON, and turns off
when the engine is started.
When operating the turn signal lights, the
left or right turn signal indicator light
flashes to indicate which turn signal light
is operating (page 5-63).
5-56
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page183
Friday, July 10 2015 5:26 PM
Black plate (183,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
When operating the hazard warning
lights, both turn signal indicator lights
flash (page 5-70).
NOTE
If an indicator light remains illuminated (does
not flash) or if it flashes abnormally, one of the
turn signal bulbs may be burned out.
Beep Sounds
qAir Bag/Front Seat Belt
Pretensioner System Warning Beep
If a malfunction is detected in the air bag/
front seat belt pretensioner systems and
the warning light, a warning beep sound
will be heard for about 5 seconds every
minute.
The air bag and seat belt pretensioner
system warning beep sound will continue
to be heard for approximately 35 minutes.
Have your vehicle inspected at an
Authorized Mazda Dealer as soon as
possible.
WARNING
Do not drive the vehicle with the air
bag/front seat belt pretensioner system
warning beep sounding:
Driving the vehicle with the air bag/
front seat belt pretensioner system
warning beep sounding is dangerous.
In a collision, the air bags and the
front seat belt pretensioner system
will not deploy and this could result
in death or serious injury.
Contact an Authorized Mazda Dealer
to have the vehicle inspected as soon
as possible.
5-57
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page184
Friday, July 10 2015 5:26 PM
Black plate (184,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
qSeat Belt Warning Beep
qLights-On Reminder
If the driver's seat belt is not fastened
when the ignition is switched ON, a beep
sound will be heard for about 6 seconds.
With warning light for front
passenger's seat
If the driver or the front passenger's seat
belt is not fastened and the vehicle is
driven at a speed faster than about 20
km/h (12 mph), a beep sound will be
heard again for a specified period of time.
Refer to Seat Belt Reminder on page
2-30.
Without warning light for front
passenger's seat
If the driver's seat belt is not fastened and
the vehicle is driven at a speed faster than
about 20 km/h (12 mph), a beep sound
will be heard again for a specified period
of time.
Refer to Seat Belt Reminder on page
2-30.
If lights are on and the key is removed
from the ignition switch, a continuous
beep sound will be heard when the
driver's door is opened.
qIgnition Key Reminder
If the ignition is switched off or the
ignition is switched to ACC with the key
inserted, a continuous beep sound will be
heard when the driver's door is opened.
NOTE
A personalized function is available to change
the sound volume for the ignition key reminder.
Refer to Personalization Features on page
10-8.
5-58
í
Some models.
Form No.8FA7-EA-15G
NOTE
A personalized function is available to change
the sound volume for the lights-on reminder.
Refer to Personalization Features on page
10-8.
qTire Inflation Pressure Warning
Beep í
The warning beep sound will be heard for
about 3 seconds when there is any
abnormality in tire inflation pressures
(page 5-28).
Mazda5_8FA7-EA-15G_Edition2 Page185
Friday, July 10 2015 5:26 PM
Black plate (185,1)
Driving Your Mazda
Switches and Controls
Lighting Control
qHeadlights
Turn the headlight switch to turn the headlights, other exterior lights and dashboard
illumination on or off.
NOTE
To prevent discharging the battery, do not leave the lights on while the engine is off unless safety
requires them.
Without AUTO position
Switch Position
Headlights
Taillights
Parking lights
License lights
Side-marker lights
Dashboard illumination
Off
Off
On
Off
On
On
With AUTO position
5-59
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page186
Friday, July 10 2015 5:26 PM
Black plate (186,1)
Driving Your Mazda
Switches and Controls
Switch Position
Headlights
Taillights
Parking lights
License lights
Side-marker lights
Dashboard illumination
Off
Off
Auto
Off
On
On
On
AUTO (Auto-light control)
When the headlight switch is in the AUTO position and the ignition is switched ON, the
light sensor senses the surrounding lightness or darkness and automatically turns the
headlights, other exterior lights and dashboard illumination on or off (see chart above).
CAUTION
Ø Do not shade the light sensor by adhering a sticker or a label on the windshield.
Otherwise the light sensor will not operate correctly.
Ø The light sensor also works as a rain sensor for the auto-wiper control. Keep
hands and scrapers clear of the windshield when the wiper lever is in the AUTO
position and the ignition is switched ON as fingers could be pinched or the wipers
and wiper blades damaged when the wipers activate automatically. If you are
going to clean the windshield, be sure the wipers are turned off completely ― this
is particularly important when clearing ice and snow ― when it is particularly
tempting to leave the engine running.
5-60
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page187
Friday, July 10 2015 5:26 PM
Black plate (187,1)
Driving Your Mazda
Switches and Controls
NOTE
l
l
l
l
The headlights, other exterior lights and dashboard illumination may not turn off immediately
even if the surrounding area becomes well-lit because the light sensor determines that it is
nighttime if the surrounding area is continuously dark for several minutes such as inside long
tunnels, traffic jams inside tunnels, or in indoor parking lots.
In this case, the light turns off if the light switch is turned to the OFF position.
The dashboard illumination can be adjusted by rotating the knob in the instrument cluster. Also,
the day/night mode can be changed by pressing the knob. To adjust the brightness of the
dashboard illumination: Refer to Dashboard Illumination on page 5-43.
When the headlight switch is in the AUTO position and the ignition is switched to ACC or the
ignition is switched off, the headlights, other exterior lights and dashboard illumination will turn
off.
The sensitivity of the AUTO lights may be changed by an Authorized Mazda Dealer. Refer to
Personalization Features on page 10-8.
Xenon fusion headlight bulbs í
The low-beam bulbs of the headlights have xenon fusion bulbs that produce a bright white
beam over a wide area.
WARNING
Do not replace the xenon fusion bulbs yourself
Replacing the xenon fusion bulbs yourself is dangerous. Because the xenon fusion
bulbs require high voltage, you could receive an electric shock if the bulbs are
handled incorrectly. Consult an Authorized Mazda Dealer when the replacement is
necessary.
NOTE
If the headlights flicker, or the brightness weakens, the bulb-life may be depleted and a replacement is
necessary. Consult an Authorized Mazda Dealer.
í
Some models.
Form No.8FA7-EA-15G
5-61
Mazda5_8FA7-EA-15G_Edition2 Page188
Friday, July 10 2015 5:26 PM
Black plate (188,1)
Driving Your Mazda
Switches and Controls
qLights-On Reminder
qFlashing the Headlights
If lights are on and the key is removed
from the ignition switch, a continuous
beep sound will be heard when the
driver's door is opened.
To flash the headlights, pull the lever fully
towards you (the headlight switch does
not need to be on). The lever will return to
the normal position when released.
NOTE
A personalized function is available to change
the sound volume for the lights-on reminder.
Refer to Personalization Features on page
10-8.
qHeadlight High-Low Beam
OFF
Flashing
Press the lever forward to turn on the high
beams.
Pull the lever back to its original position
for the low beams.
qHeadlight Leveling í
High beam
Low beam
5-62
í
Some models.
Form No.8FA7-EA-15G
The number of passengers and weight of
cargo in the luggage compartment change
the angle of the headlights.
The headlight leveling switch is used to
adjust the angle of the headlights
manually.
Mazda5_8FA7-EA-15G_Edition2 Page189
Friday, July 10 2015 5:26 PM
Black plate (189,1)
Driving Your Mazda
Switches and Controls
Select the proper headlight angle from the following
chart.
Front seat
Driver Passenger
×
―
×
×
×
×
×
×
×
―
Rear
seat*1
Load
Switch
Position
―
―
×
×
―
―
―
―
×
×
0
0
1
2
3
×: Yes
―: No
*1 Second-row and third-row seats
Turn and Lane-Change
Signals
Turn signals
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.
If the indicator light continues to flash
after a turn, manually return the lever to
its original position.
qDaytime Running Lights (Canada)
Right turn
In Canada, vehicles must be driven with
the headlights on during daytime
operation.
Right lane change
For that reason, the daytime running lights
automatically turn on when the ignition is
switched ON.
OFF
Left lane change
NOTE
The Daytime Running Lights turn off when the
parking brake is applied.
Left turn
Green indicators on the dashboard show
which signal is working.
Lane-change signals
Move the lever halfway toward the
direction of the change ―until the
indicator flashes― and hold it there. It
will return to the off position when
released.
NOTE
l
l
If an indicator light stays on without
flashing or if it flashes abnormally, one of
the turn signal bulbs may be burned out.
A personalized function is available to
change the turn indicator sound volume.
Refer to Personalization Features on page
10-8.
5-63
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page190
Friday, July 10 2015 5:26 PM
Black plate (190,1)
Driving Your Mazda
Switches and Controls
Fog Lights í
The fog lights will improve visibility at
night and during foggy conditions.
The headlights must be turned on to turn
on the fog lights.
To turn the fog lights on, rotate the fog
position.
light switch to the
Fog light switch
To turn the fog lights off, rotate the fog
light switch to the OFF position or turn
the headlights off.
NOTE
l
l
The fog lights will turn off when the
headlights are set at high beam.
(With auto-light control)
If the headlight switch is in the AUTO
position, the fog lights can be turned on
when the headlights, the exterior lights and
dashboard illumination are on.
5-64
í
Some models.
Form No.8FA7-EA-15G
Windshield Wipers and
Washer
The ignition must be switched ON.
WARNING
Use only windshield washer fluid or
plain water in the reservoir:
Using radiator antifreeze as washer
fluid is dangerous. If sprayed on the
windshield, it will dirty the
windshield, affect your visibility, and
could result in an accident.
Only use windshield washer fluid
mixed with anti-freeze protection in
freezing weather conditions:
Using windshield washer fluid
without anti-freeze protection in
freezing weather conditions is
dangerous as it could freeze on the
windshield and block your vision
which could cause an accident.
In addition, make sure the
windshield is sufficiently warmed
using the defroster before spraying
the washer fluid.
Mazda5_8FA7-EA-15G_Edition2 Page191
Friday, July 10 2015 5:26 PM
Black plate (191,1)
Driving Your Mazda
Switches and Controls
NOTE
Because heavy ice and snow can jam the wiper
blades, the wiper motor is protected from
motor breakdown, overheating and possible
fire by a circuit breaker. This mechanism will
automatically stop operation of the blades, but
only for about 5 minutes.
If this happens, turn off the wiper switch and
park off the right-of-way, and remove the snow
and ice.
After 5 minutes, turn on the switch and the
blades should operate normally. If they do not
resume functioning, consult an Authorized
Mazda Dealer as soon as possible. Drive to
the side of the road and park off the right-ofway. Wait until the weather clears before trying
to drive with the wipers inoperative.
Switch Position
Type Type
No.
A
B
Wiper operation
Single wipe cycle (mist)
Intermittent
Low speed
High speed
With AUTO position
qWindshield Wipers
Turn the wipers on by pressing the lever
up or down.
With INT position
Switch
Position
Wiper operation
Single wipe cycle (mist)
Auto control
Low speed
High speed
5-65
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page192
Friday, July 10 2015 5:26 PM
Black plate (192,1)
Driving Your Mazda
Switches and Controls
Variable-speed intermittent wipers
Set the lever to the intermittent position
and choose the interval timing by rotating
the ring.
The sensitivity of the rain sensor can be
adjusted by turning the switch on the
wiper lever.
From the center position (normal), rotate
the switch downward for higher
sensitivity (faster response) or rotate it
upward for less sensitivity (slower
response).
Higher sensitivity
Switch
INT ring
Center
position
AUTO (Auto-wiper control)
When the wiper lever is in the AUTO
position, the rain sensor senses the
amount of rainfall on the windshield and
turns the wipers on or off automatically
(off―intermittent―low speed―high
speed).
5-66
Form No.8FA7-EA-15G
Less sensitivity
CAUTION
Ø Do not shade the rain sensor by
adhering a sticker or a label on
the windshield. Otherwise the rain
sensor will not operate correctly.
Mazda5_8FA7-EA-15G_Edition2 Page193
Friday, July 10 2015 5:26 PM
Black plate (193,1)
Driving Your Mazda
Switches and Controls
Ø When the wiper lever is in the
AUTO position and the ignition is
switched ON, the wipers may
move automatically in the
following cases:
Ø If the windshield above the rain
sensor is touched or wiped with
a cloth.
Ø If the windshield is struck with
a hand or other object from
either outside or inside the
vehicle.
Keep hands and scrapers clear of
the windshield when the wiper
lever is in the AUTO position and
the ignition is switched ON as
fingers could be pinched or the
wipers and wiper blades damaged
when the wipers activate
automatically.
If you are going to clean the
windshield, be sure the wipers are
turned off completely―this is
particularly important when
clearing ice and snow―when it is
most likely that the engine is left
running.
NOTE
l
l
l
l
l
Switching the auto-wiper lever from the
OFF to the AUTO position while driving at
a vehicle speed of 4 km/h (2 mph) or higher
(or after driving the vehicle) activates the
windshield wipers once, after which they
operate according to the rainfall amount.
The auto-wiper control may not operate
when the rain sensor temperature is about
_10 °C (14 °F) or lower, or about 85 °C
(185 °F) or higher.
If the windshield is coated with water
repellent, the rain sensor may not be able to
sense the amount of rainfall correctly and
auto-wiper control may not operate
properly.
If dirt or foreign matter (Such as ice or
matter containing salt water) adheres to the
windshield above the rain sensor or if the
windshield is iced, it could cause the wipers
to move automatically. However, if the
wipers cannot remove this ice, dirt or
foreign matter, the auto-wiper control will
stop operation. In this case, set the wiper
lever to the low speed position or high
speed position for manual operation, or
remove the ice, dirt or foreign matter by
hand to restore the auto-wiper operation.
If the auto-wiper lever is left in the AUTO
position, the wipers could operate
automatically from the effect of strong light
sources, electromagnetic waves, or infrared
light because the rain sensor uses an
optical sensor. It is recommended that the
auto-wiper lever be switched to the OFF
position other than when driving the vehicle
under rainy conditions.
5-67
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page194
Friday, July 10 2015 5:26 PM
Black plate (194,1)
Driving Your Mazda
Switches and Controls
qWindshield Washer
Pull the lever toward you and hold it to
spray washer fluid.
Rear Window Wiper and
Washer
The ignition must be switched ON.
qRear Window Wiper
OFF
Washer
NOTE
With the wiper lever in the OFF or intermittent
position/AUTO position, the wipers will
operate continuously until the lever is
released.
If the washer does not work, inspect the
fluid level (page 8-17). If it's normal,
consult an Authorized Mazda Dealer.
Turn the wiper on by turning the rear
wiper/washer switch.
Switch Position
Type Type
No.
A
B
Wiper operation
INT Intermittent
ON Normal
qRear Window Washer
To spray washer fluid, turn the rear wiper/
position. After
washer switch to the
the switch is released, the washer will
stop.
If the washer does not work, inspect the
fluid level (page 8-17). If it's normal and
the washer still does not work, consult an
Authorized Mazda Dealer.
5-68
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page195
Friday, July 10 2015 5:26 PM
Black plate (195,1)
Driving Your Mazda
Switches and Controls
Rear Window Defogger
The rear window defogger clears fog from
the rear window.
qMirror Defogger í
To turn on the mirror defoggers, switch
the ignition ON and press the rear window
defogger switch (page 5-69).
The ignition must be switched ON.
Press the switch to turn on the rear
window defogger. The rear window
defogger operates for about 15 minutes
and turns off automatically.
The indicator light illuminates during
operation.
To turn off the rear window defogger
before the 15 minutes has elapsed, press
the switch again.
Indicator light
CAUTION
Do not use sharp instruments or
window cleaners with abrasives to
clean the inside of the rear window
surface. They may damage the
defogger grid inside the window.
NOTE
This defogger is not designed for melting snow.
If there is an accumulation of snow on the rear
window, remove it before using the defogger.
í
Some models.
Form No.8FA7-EA-15G
5-69
Mazda5_8FA7-EA-15G_Edition2 Page196
Friday, July 10 2015 5:26 PM
Black plate (196,1)
Driving Your Mazda
Switches and Controls
Horn
To sound the horn, press the
the steering wheel.
Hazard Warning Flasher
mark on
The hazard warning lights should always
be used when you stop on or near a
roadway in an emergency.
The hazard warning lights warn other
drivers that your vehicle is a traffic hazard
and that they must take extreme caution
when near it.
Hazard warning flasher
Depress the hazard warning flasher and all
the turn signals will flash.
NOTE
l
l
5-70
Form No.8FA7-EA-15G
The turn signals do not work when the
hazard warning lights are on.
Check local regulations about the use of
hazard warning lights while the vehicle is
being towed to verify that it is not in
violation of the law.
Mazda5_8FA7-EA-15G_Edition2 Page197
Friday, July 10 2015 5:26 PM
6
Black plate (197,1)
Interior Comfort
Use of various features for drive comfort, including air-conditioning and audio
system.
Climate Control System ...............................................................
Operating Tips ...........................................................................
Vent Operation ..........................................................................
Fully Automatic Type ...............................................................
Rear Ventilation System ............................................................
6-2
6-2
6-3
6-5
6-9
Audio System ...............................................................................
Antenna ...................................................................................
Operating Tips for Audio System ...........................................
Audio Set ................................................................................
Audio Control Switch Operation ............................................
AUX/USB/iPod Mode ............................................................
Safety Certification .................................................................
6-11
6-11
6-12
6-23
6-47
6-50
6-59
Bluetooth® Audio ....................................................................... 6-60
Bluetooth® Audio í ................................................................ 6-60
Bluetooth® Hands-Free ..............................................................
Bluetooth® Hands-Free í .......................................................
Basic Bluetooth® Hands-Free Operation ................................
Convenient Use of the Hands-Free System .............................
Hands-Free Setting ..................................................................
When Bluetooth® Hands-Free Cannot be Used .....................
Safety Certification .................................................................
Mazda Bluetooth® Hands-Free Customer Service .................
6-70
6-70
6-74
6-79
6-85
6-91
6-92
6-92
Interior Equipment ..................................................................... 6-93
Sunvisors ................................................................................. 6-93
Interior Lights ......................................................................... 6-93
Information Display ................................................................ 6-95
Cup Holder ............................................................................ 6-100
Bottle Holder ......................................................................... 6-101
Storage Compartments .......................................................... 6-102
Accessory Sockets ................................................................ 6-109
í
Some models.
Form No.8FA7-EA-15G
6-1
Mazda5_8FA7-EA-15G_Edition2 Page198
Friday, July 10 2015 5:26 PM
Black plate (198,1)
Interior Comfort
Climate Control System
Operating Tips
qOperating the Climate Control
System
Operate the climate control system with
the engine running.
NOTE
To prevent the battery from being discharged,
do not leave the fan control dial on for a long
period of time with the ignition switched ON
when the engine is not running.
qClearing the Air Inlet
Clear all obstructions such as leaves,
snow and ice from the hood and the air
inlet in the cowl grille to improve the
system efficiency.
qFoggy Windows
The windows may fog up easily in humid
weather. Use the climate control system to
defog the windows.
To help defog the windows, operate the
air conditioner to dehumidify the air.
NOTE
The air conditioner may be used along with the
heater to dehumidify the air.
qOutside/Recirculated Air Position
Use the outside air mode for ventilation or
windshield defrosting. The recirculate
mode should be used when the air inside
tunnels or while in traffic jams is polluted,
or you would like to shut off outside air
for quick cooling of the interior.
6-2
Form No.8FA7-EA-15G
qParking in Direct Sunlight
If the vehicle has been parked in direct
sunlight during hot weather, open the
windows to let warm air escape, then run
the climate control system.
qNot Using for a Long Period
Run the air conditioner about 10 minutes
at least once a month to keep internal
parts lubricated.
qCheck the Refrigerant before the
Weather Gets Hot
Have the air conditioner checked before
the weather gets hot. Lack of refrigerant
may make the air conditioner less
efficient.
The refrigerant specifications are
indicated on a label attached to the inside
of the engine compartment. Check the
label before refilling the refrigerant. If the
wrong type of refrigerant is used, it could
result in a serious malfunction of the air
conditioner.
For details, consult an Authorized Mazda
Dealer.
qReplacement of the Cabin Air Filter
Your vehicle is equipped with an air filter
for the air conditioner. It is necessary to
change the filter periodically as indicated
in scheduled maintenance (page 8-4).
Consult an Authorized Mazda Dealer for
replacement of the cabin air filter.
Mazda5_8FA7-EA-15G_Edition2 Page199
Friday, July 10 2015 5:26 PM
Black plate (199,1)
Interior Comfort
Climate Control System
Vent Operation
qAdjusting the Vents
Center Vents
Directing airflow
To adjust the direction of airflow, move
the adjustment knob.
Side Vents
To adjust the direction of airflow, open the
vents and rotate them left and right.
Knob
Dial
Open
Close
Push
NOTE
l
l
When using the air conditioner under
humid ambient temperature conditions, the
system may blow fog from the vents. This is
not a sign of trouble but a result of humid
air being suddenly cooled.
The air vents can be fully opened and
closed by operating the dial.
6-3
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page200
Friday, July 10 2015 5:26 PM
Black plate (200,1)
Interior Comfort
Climate Control System
qSelecting the Airflow Mode
Dashboard Vents
Defroster and Floor Vents
Dashboard and Floor Vents
Defroster Vents
Floor Vents
6-4
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page201
Friday, July 10 2015 5:26 PM
Black plate (201,1)
Interior Comfort
Climate Control System
Fully Automatic Type
Climate control information is displayed on the information display.
Auto switch
Temperature control dial
Windshield defroster switch
Mode selector switch
Air intake selector
OFF switch
Fan control dial
A/C switch
Rear ventilation control switch
Rear window defogger switch
qControl Switches
AUTO switch
l
l
Outside/Recirculated air selection
Air conditioner operation
NOTE
AUTO switch indicator light
l When on, it indicates AUTO operation, and
the system will function automatically.
l If any of the following dials or switches are
operated while in AUTO control, the AUTO
switch indicator turns off.
Mode selector switch
Fan control dial
Windshield defroster switch
The functions for dials and switches other
than those operated in the above continue
to operate in AUTO control.
l
l
By pressing the AUTO switch the
following functions will be automatically
controlled in accordance with the selected
set temperature:
l Airflow temperature
l Amount of airflow
l Selection of airflow mode
l
6-5
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page202
Friday, July 10 2015 5:26 PM
Black plate (202,1)
Interior Comfort
Climate Control System
OFF switch
Mode selector switch
Pressing the OFF switch shuts off the
climate control system.
The desired airflow mode can be selected
(page 6-4).
Temperature control dial
NOTE
l
Cold
Hot
l
l
This dial controls temperature. Turn it
clockwise for hot and counterclockwise
for cold.
Fan control dial
With the airflow mode set to
position
and the temperature control dial set at a
medium temperature, heated air is directed
to the feet and a comparably lower air
temperature will flow through the central,
left and right vents.
To set the air vent to
, press the
windshield defroster switch.
(U.S.A., Canada)
In the
or
position, the air
conditioner is automatically turned on and
the outside air mode is automatically
selected to defrost the windshield. In the
or
position, the outside air mode
cannot be changed to the recirculated air
mode.
A/C switch
Slow
Fast
The fan has seven speeds. The selected
speed will be displayed.
6-6
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page203
Friday, July 10 2015 5:26 PM
Black plate (203,1)
Interior Comfort
Climate Control System
Pressing the A/C switch while the AUTO
switch is turned on will turn off the air
conditioning (cooling/dehumidifying
functions). The air conditioning can be
turned on and off by pressing the A/C
switch while the fan control dial is on.
NOTE
l
l
The air conditioning operates when the A/C
switch is pressed even if the fan is off.
The air conditioner may not function when
the outside temperature approaches 0 °C
(32 °F).
WARNING
Do not use the
position in cold or
rainy weather:
position in cold or
Using the
rainy weather is dangerous as it will
cause the windows to fog up. Your
vision will be hampered, which could
lead to a serious accident.
Windshield defroster switch
Air intake selector
Press the switch to defrost the windshield
and front door windows.
NOTE
Outside or recirculated air positions can
be selected. Press the switch to select
outside/recirculated air positions.
Recirculated air position (indicator
light illuminated)
Use this position when going through
tunnels, driving in congested traffic (high
engine exhaust areas) or when quick
cooling is desired.
(U.S.A., Canada)
In the
position, the air conditioner is
automatically turned on and the outside air
mode is automatically selected to defrost the
windshield. In the
position, the outside air
mode cannot be changed to the recirculated
air mode.
Outside air position (indicator light
turned off)
Use this mode for ventilation or
windshield defrosting.
6-7
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page204
Friday, July 10 2015 5:26 PM
Black plate (204,1)
Interior Comfort
Climate Control System
qOperation of Automatic Air
Conditioning
qWindshield Defrosting and Defogging
1. Press the AUTO switch. Selection of
the airflow mode, air intake selector
and amount of airflow will be
automatically controlled.
2. Use the temperature control dial to
select a desired temperature.
Cold
Hot
To turn off the system, press the OFF
switch.
NOTE
l
l
Setting the temperature to maximum high
or low will not provide the desired
temperature at a faster rate.
When selecting heat, the system will restrict
airflow until it has warmed to prevent cold
air from blowing out of the vents.
6-8
Form No.8FA7-EA-15G
Press the windshield defroster switch.
In this position, the outside air position is
automatically selected, and the air
conditioner automatically turns on. The
air conditioner will directly dehumidify
the air to the front windshield and side
windows (page 6-4). Airflow amount will
be increased.
WARNING
Set the temperature control to the hot
or warm position when defogging (
position):
position with the
Using the
temperature control set to the cold
position is dangerous as it will cause
the outside of the windshield to fog
up. Your vision will be hampered,
which could lead to a serious
accident.
NOTE
Use the temperature control dial to increase
the air flow temperature and defog the
windshield more quickly.
Mazda5_8FA7-EA-15G_Edition2 Page205
Friday, July 10 2015 5:26 PM
Black plate (205,1)
Interior Comfort
Climate Control System
qTemperature Sensor
The fully automatic air conditioner uses
the temperature sensor to measure the
temperature inside the passenger
compartment. It then sets the passenger
compartment temperature accordingly.
CAUTION
Do not obstruct the temperature
sensor, otherwise the automatic air
conditioner will not operate properly.
Rear Ventilation System
The rear ventilation system only blows
cool air through the rear vents while the
front climate control system is on. It does
not blow air when the front climate
control is off. The rear vents blow either
outside air or recirculated air, depending
on the position in which the air intake
selector switch is set.
Front climate control is given priority
over the rear ventilation control.
Knob
qControl Switches
Interior temperature sensor
Rear ventilation control switch
To get air flowing through the rear vents,
first operate the fan control dial or turn on
the AUTO switch on the front climate
control operation panel. Then, switch on
the rear ventilation control switch on the
front climate control panel, or switch on
either the low or high rear vent button on
the rear console.
6-9
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page206
Friday, July 10 2015 5:26 PM
Interior Comfort
Climate Control System
Rear vent buttons
The rear vent switches adjust the airflow
volume flowing from the rear vent.
OFF: Fan off
LO: Low speed
HI: High speed
NOTE
Only cool or cold air (no heat) blows through
the rear vents while the front climate control is
on. Heat for the rear passengers comes from
under the front seats when the front heater is
on and set to floor mode.
When pressing the rear ventilation control
switch on the front control panel (with climate
control system on), the rear ventilation system
operates at low speed only. To change to high
speed, press the HI rear vent button.
6-10
Form No.8FA7-EA-15G
Black plate (206,1)
Mazda5_8FA7-EA-15G_Edition2 Page207
Friday, July 10 2015 5:26 PM
Black plate (207,1)
Interior Comfort
Audio System
Antenna
qDetachable Type
To remove the antenna, turn it
counterclockwise.
To install the antenna, turn it clockwise.
Make sure the antenna is securely
installed.
AM/FM Radio Antenna í
The AM/FM radio antenna receives both
AM and FM signals.
Install
CAUTION
Ø To prevent damage to the
antenna, remove it before entering
a car wash facility or passing
beneath a low overhead clearance.
Ø Be careful around the antenna
when removing snow from the
roof. Otherwise the antenna could
be damaged.
NOTE
When leaving your vehicle unattended, we
recommend that you remove the antenna and
store it inside the vehicle.
Remove
Antenna for AM/FM and Satellite
Radio Antenna í
The antenna for AM/FM and satellite
radio antenna receives both AM and FM
signals and SIRIUS signals.
Install
Remove
í
Some models.
Form No.8FA7-EA-15G
6-11
Mazda5_8FA7-EA-15G_Edition2 Page208
Friday, July 10 2015 5:26 PM
Black plate (208,1)
Interior Comfort
Audio System
Operating Tips for Audio
System
WARNING
Do not adjust the audio control
switches while driving the vehicle:
Adjusting the audio while driving the
vehicle is dangerous as it could
distract your attention from the
vehicle operation which could lead to
a serious accident. Always adjust the
audio while the vehicle is stopped.
Even if the audio control switches are
equipped on the steering wheel, learn
to use the switches without looking
down at them so that you can keep
your maximum attention on the road
while driving the vehicle.
CAUTION
For the purposes of safe driving,
adjust the audio volume to a level
that allows you to hear sounds
outside of the vehicle including car
horns and particularly emergency
vehicle sirens.
qRadio Reception
AM characteristics
AM signals bend around such things as
buildings or mountains and bounce off the
ionosphere. Therefore, they can reach
longer distances than FM signals. Because
of this, two stations may sometimes be
picked up on the same frequency at the
same time.
Ionosphere
Station 1
Station 2
FM characteristics
An FM broadcast range is usually about
40―50 km (25―30 miles) from the
source. Because of extra coding needed to
break the sound into two channels, stereo
FM has even less range than monaural
(non-stereo) FM.
FM Station
NOTE
l
l
To prevent the battery from being
discharged, do not leave the audio system
on for a long period of time when the
engine is not running.
If a cellular phone or CB radio is used in
or near the vehicle, it could cause noise to
occur from the audio system, however, this
does not indicate that the system has been
damaged.
6-12
Form No.8FA7-EA-15G
40—50km
(25—30 miles)
Mazda5_8FA7-EA-15G_Edition2 Page209
Friday, July 10 2015 5:26 PM
Black plate (209,1)
Interior Comfort
Audio System
Signals from an FM transmitter are similar
to beams of light because they do not
bend around corners, but they do reflect.
Unlike AM signals, FM signals cannot
travel beyond the horizon. Therefore, FM
stations cannot be received at the great
distances possible with AM reception.
Ionosphere
FM wave
Flutter/Skip noise
Signals from an FM transmitter move in
straight lines and become weak in valleys
between tall buildings, mountains, and
other obstacles. When a vehicle passes
through such an area, the reception
conditions may change suddenly, resulting
in annoying noise.
AM wave
FM wave
100—200 km (60—120 miles)
Atmospheric conditions can also affect
FM reception. High humidity will cause
poor reception. However, cloudy days
may provide better reception than clear
days.
Multipath noise
Since FM signals can be reflected by
obstructions, it is possible to receive both
the direct signal and the reflected signal at
the same time. This causes a slight delay
in reception and may be heard as a broken
sound or a distortion. This problem may
also be encountered when in close
proximity to the transmitter.
Weak signal noise
In suburban areas, broadcast signals
become weak because of distance from
the transmitter. Reception in such fringe
areas is characterized by sound breakup.
Reflected wave
Direct
6-13
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page210
Friday, July 10 2015 5:26 PM
Black plate (210,1)
Interior Comfort
Audio System
Strong signal noise
This occurs very close to a transmitter
tower. The broadcast signals are
extremely strong, so the result is noise and
sound breakup at the radio receiver.
qOperating Tips for CD Player
Station drift noise
Handling the CD player
The following precautions should be
observed.
l Do not spill any liquid on the audio
system.
When a vehicle reaches the area of two
strong stations broadcasting at similar
frequencies, the original station may be
temporarily lost and the second station
picked up. At this time there will be some
noise from this disturbance.
Station 1
88.1 MHz
Condensation phenomenon
Immediately after turning on the heater
when the vehicle is cold, the CD or
optical components (prism and lens) in the
CD player may become clouded with
condensation. At this time, the CD will
eject immediately when placed in the unit.
A clouded CD can be corrected simply by
wiping it with a soft cloth. Clouded
optical components will clear naturally in
about an hour. Wait for normal operation
to return before attempting to use the unit.
Station 2
88.3 MHz
l
6-14
Form No.8FA7-EA-15G
Do not insert any objects, other than
CDs, into the slot.
Mazda5_8FA7-EA-15G_Edition2 Page211
Friday, July 10 2015 5:26 PM
Black plate (211,1)
Interior Comfort
Audio System
l
The CD revolves at high speed within
the unit. Defective (cracked or badly
bent) CDs should never be used.
l
Do not use non-conventional discs
such as heart-shaped, octagonal discs,
etc. The disc may not eject resulting in
a malfunction.
l
l
A new CD may have rough edges on
its inner and outer perimeters. If a disc
with rough edges is used, proper
setting will not be possible and the CD
player will not play the CD. In
addition, the disc may not eject
resulting in a malfunction. Remove the
rough edges in advance by using a ballpoint pen or pencil as shown below. To
remove the rough edges, rub the side of
the pen or pencil against the inner and
outer perimeter of the CD.
l
When driving over uneven surfaces,
the sound may jump.
l
The CD player has been designed to
play CDs bearing the identification
logo as shown below. No other discs
can be played.
If the memory portion of the CD is
transparent or translucent, do not use
the disc.
Transparent
6-15
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page212
Friday, July 10 2015 5:26 PM
Black plate (212,1)
Interior Comfort
Audio System
l
l
Use discs that have been legitimately
produced. If illegally-copied discs such
as pirated discs are used, the system
may not operate properly.
Be sure never to touch the signal
surface when handling the CDs. Pick
up a CD by grasping the outer edge or
the edge of the hole and the outer edge.
l
l
l
l
l
l
l
l
l
l
l
Do not stick paper or tape on the CD.
Avoid scratching the reverse side (the
side without a label). The disc may not
eject resulting in a malfunction.
Dust, finger smudges, and dirt can
decrease the amount of light reflected
from the signal surface, thus affecting
sound quality. If the CD should
become soiled, gently wipe it with a
soft cloth from the center of the CD to
the edge.
Do not use record sprays, antistatic
agents, or household spray cleaners.
Volatile chemicals such as benzine and
thinner can also damage the surface of
the CD and must not be used. Anything
that can damage, warp, or fog plastic
should never be used to clean CDs.
Insert discs one by one. If two discs are
inserted at the same time, the system
may not operate properly.
The CD player ejects the CD if the CD
is inserted upside down. Also dirty
and/or defective CDs may be ejected.
Do not insert cleaning discs in the CD
player.
6-16
Form No.8FA7-EA-15G
l
l
l
l
Do not insert any disc with a peel-off
seal affixed to it.
This unit may not be able to play
certain CD-R/CD-RWs made using a
computer or music CD recorder due to
disc characteristics, scratches,
smudges, dirt, etc., or due to dust or
condensation on the lens inside the
unit.
Storing CDs in the vehicle exposed to
direct sunlight or high temperature may
damage the CD-R/CD-RWs, and make
them unplayable.
CD-R/CD-RW exceeding 700 MB
cannot be played.
This unit may not be able to play
certain discs made using a computer
due to the application (writing
software) setting used. (For details,
consult the store where the application
was purchased.)
It is possible that certain text data, such
as titles, recorded on a CD-R/CD-RW
may not be displayed when musical
data (CD-DA) is playing.
The period from when a CD-RW is
inserted to when it begins playing is
longer than a normal CD or CD-R.
Completely read the instruction manual
and cautions for CD-R/CD-RWs.
Do not use discs with cellophane tape
adhering, partially peeled off labels, or
adhesive material exuding from the
edges of the CD label. Also, do not use
discs with a commercially-available
CD-R label affixed. The disc may not
eject resulting in a malfunction.
Mazda5_8FA7-EA-15G_Edition2 Page213
Friday, July 10 2015 5:26 PM
Black plate (213,1)
Interior Comfort
Audio System
qOperating tips for MP3
l
NOTE
Supply of this product only conveys a license
for private, non-commercial use and does not
convey a license nor imply any right to use this
product in any commercial (i.e. revenuegenerating) real time broadcasting (terrestrial,
satellite, cable and/or any other media),
broadcasting/streaming via the Internet,
intranets and/or other networks or in other
electronic content distribution systems, such as
pay-audio or audio-on-demand applications.
An independent license for such use is
required. For details, please visit
http://www.mp3licensing.com.
l
This audio system handles MP3 files
that have been recorded on CD-R/CDRW/CD-ROMs. Discs that have been
recorded using the following formats
can be played:
ISO 9660 level 1
ISO 9660 level 2
Joliet extended format
Romeo extended format
This unit handles MP3 files
conforming to the MP3 format
containing both header frames and data
frames.
This unit can play multi-session
recorded discs that have up to 40
sessions.
This unit can play MP3s with sampling
frequencies of 8/11.025/12/16/22.05/
24/32/44.1/48 kHz.
This unit can play MP3 files that have
been recorded in bit rates of 8 kbps to
320 kbps. Nonetheless, to insure
enjoyment of music with consistent
sound quality, it is recommended to use
discs that have been recorded at a bit
rate of 128 kbps or more.
l
l
If a disc has both music data (CD-DA)
and MP3 files, playback of the two file
types differs depending on how the
disc was recorded.
Packet written discs cannot be played
on this unit.
This unit does not play CDs recorded
using MP3i (MP3 interactive), MP3
PRO and RIFF MP3 formats.
About folders and files
l
The arrangement and playing order of a
recorded disc containing MP3 files is
as follows:
: Folder
Folder
No.
03
3
04
l
l
06
07
l
l
05
2
l
l
02
: Track (File)
5
l
l
01
7
6
4
1
Level1
Level3
Level4
Level2
Playback may not occur in the above
hierarchy depending on the audio unit.
l
l
The folder order is automatically
assigned and this order cannot be
optionally set.
Any folder without an MP3 file will be
ignored. (It will be skipped and the
folder number will not be displayed.)
6-17
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page214
Friday, July 10 2015 5:26 PM
Black plate (214,1)
Interior Comfort
Audio System
l
l
l
l
l
MP3 files not conforming to the MP3
format containing both header frames
and data frames will be skipped and
not played.
This unit will play MP3 files that have
up to eight levels. However, the more
levels a disc has, the longer it will take
to initially start playing. It is
recommended to record discs with two
levels or less.
A single disc with up to 512 files can
be played and a single folder with up to
255 files can be played.
When naming an MP3 file, be sure to
add an MP3 file extension (.mp3) after
the file name.
The number of characters which can be
displayed is restricted.
CAUTION
This unit can only play MP3 files that
have an MP3 file extension (.mp3)
attached. Do not attach an MP3 file
extension to any other type file as it
could cause noise to be emitted or a
malfunction in the unit.
About ID3 Tag display
l
l
This unit can only display ID3 Tag
album, track and artist names that have
been input using Ver.1.0/1.1/2.2/2.3/2.4
formats. Any other data that may have
been input cannot be displayed.
This unit cannot display some
characters. Characters which cannot be
displayed are indicated by an asterisk
( ).
6-18
Form No.8FA7-EA-15G
Specialized glossary
MP3
Abbreviation for “MPEG Audio Layer 3”.
A technical standard for audio
compression as decided by the ISO*1
MPEG working group. Use of MP3
allows for audio data to be compressed to
approximately a tenth of the source data
size.
*1 International Organization for
Standardization
ISO 9660
An international standard for logical
formatting of CD-ROM files and folders.
It is divided into three separate levels
based on differences in file naming
procedures, data configuration and other
characteristics.
Multi-session
A session is the complete amount of data
recorded from the beginning to the end of
a single period of CD-ROM, CD-R/CDRW data recording. Multi-session refers to
the existence of data from two or more
sessions on a single disc.
Sampling
Refers to the process of encoding analog
audio data at regular intervals and
converting it to digital data. The sampling
rate refers to the number of times a
sample is taken in one second and is
expressed in Hz units. Increasing the
sampling rate improves the sound quality
but also increases the data size.
Mazda5_8FA7-EA-15G_Edition2 Page215
Friday, July 10 2015 5:26 PM
Black plate (215,1)
Interior Comfort
Audio System
Bit rate
Refers to the volume of data per second,
expressed in bps (bits per second).
Generally, the larger the number of the
transfer bit rate when compressing an
MP3 file, the more information regarding
musical reproduction it carries, and
therefore the better the sound quality.
Playable WMA files are as follows:
Item
Specification
Sampling rate
Bit rate
CAUTION
Packet writing
A general term for the method, similar to
that used for floppy discs or hard drives,
of recording the required file in a single
increment on a CD-R and similar.
This unit plays files with the (.wma)
file extension as a WMA file. Do not
use the WMA file extension for files
other than WMA files. Otherwise, it
could result in noise or a
malfunction.
ID3 Tag
ID3 tag is a method for storing
information related to the music in an
MP3 file. Information such as track, artist
and album name can be stored. This
content can be freely edited using ID3
editing function software.
l
l
VBR
Abbreviation for Variable Bit Rate. While
CBR (Constant Bit Rate) is generally
used, VBR varies the bit rate for audio
compression according to compression
conditions and this allows for
compression with preference given to
sound quality.
Content
Windows Media Audio Version
7.0, 8.0, 9.0
22.05 kHz (MID)
44.1/48/32 kHz (HI)
32―192 kbps (Version 7.0, 8.0)
32―320 kbps (Version 9.0)
l
Track, artist and album name
information is recorded as data termed
“WMA-Tag”, and this information is
displayable.
WMA files written under specifications
other than the indicated specification
may not play normally or files or folder
names may not display correctly.
The file extension may not be provided
depending on the computer operating
system, version, software, or settings.
In this case, add the file extension
“.wma” to the end of the file name, and
then write it to the disc.
qOperating Tips for WMA
qOperating Tips for AAC
WMA is short for Windows Media Audio
and is the audio compression format used
by Microsoft.
Audio data can be created and stored at a
higher compression ratio than MP3.
* Microsoft and Windows Media are
registered trademarks of Microsoft
Corporation U.S. in the United States
and other countries.
Advanced Audio Coding (AAC) is
standardized voice compression
established by the ISO*1 working group
(MPEG). Audio data can be created and
stored at a higher compression ratio than
MP3.
*1 International Organization for
Standardization
6-19
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page216
Friday, July 10 2015 5:26 PM
Black plate (216,1)
Interior Comfort
Audio System
Playable AAC file specifications
This unit supports playback of AAC files
recorded in CD-R and CD-RW.
qOperating Tips for USB device
Playable AAC files are as follows:
NOTE
This unit supports playback of MP3/
WMA/AAC files recorded to USB device.
l
Item
Specification
Sampling rate
Bit rate
Content
MPEG-4 AAC-LC
8/11.025/12 kHz
16/22.05/24 kHz
32/44.1/48 kHz
24―320 kbps
CAUTION
This unit plays files with the file
extension (.aac/.m4a) as an AAC file.
Do not use the AAC file extension for
files other than AAC files. Otherwise,
it could result in noise or a
malfunction.
l
l
l
Song, artist, and album name
information in the AAC file is recorded
as data termed
“iTunes, m4a, Meta-Data applicable”,
and this information is displayable.
AAC files written under specifications
other than the indicated specification
may not play normally or files or folder
names may not display correctly.
The file extension may not be provided
depending on the computer operating
system, version, software, or settings.
In this case, add the file extension
“.aac/.m4a” to the end of the file name,
then write it to the disc.
l
l
l
l
l
l
l
Music data (MP3/WMA/AAC (.aac/.m4a)
format) stored in a USB mass-storage class
compliant device (such as USB flash
memory) can be played.
Playback may not be possible depending on
the type and condition of the USB flash
memory even if the audio file complies with
the standard above.
A copyright protected WMA/AAC file
cannot be played in this unit.
The order of the music data stored in the
device may differ from the playback order.
To prevent loss or damage of stored data,
we recommend that you always back up
your data.
If a device exceeds the maximum electric
current value of 500 mA, it may not operate
or recharge when connected.
Do not pull out the USB device while in the
USB mode (only pull it out while in FM/AM
radio or CD mode).
The device will not operate if the data is
password protected.
Playable MP3 file specifications
Playable MP3 files are as follows:
Item
Specification
Sampling rate
Bit rate
6-20
Form No.8FA7-EA-15G
Content
MPEG1 AUDIO LAYER III
MPEG2 AUDIO LAYER III
MPEG2.5
44.1/48/32 kHz (MPEG1)
22.05/24/16 kHz (MPEG2)
11.025/12/8 kHz (MPEG2.5)
32―320 kbps (MPEG1)
32―160 kbps (MPEG2)
32―160 kbps (MPEG2.5)
Mazda5_8FA7-EA-15G_Edition2 Page217
Friday, July 10 2015 5:26 PM
Black plate (217,1)
Interior Comfort
Audio System
CAUTION
This unit plays files with the file
extension (mp3) as an MP3 file. Do
not use the MP3 file extension for
files other than MP3 files. Otherwise,
it could result in noise or a
malfunction.
l
The file extension may not be provided
depending on the computer operating
system, version, software, or settings.
In this case, add the file extension
“.wma” to the end of the file name, and
then write it to the memory.
Playable AAC file specification
Playable AAC files are as follows:
l
l
MP3 files written under specifications
other than the indicated specification
may not play normally or files or folder
names may not display correctly.
The file extension may not be provided
depending on the computer operating
system, version, software, or settings.
In this case, add the file extension
“.mp3” to the end of the file name, and
then write it to the memory.
Item
Specification
Sampling rate
Bit rate
CAUTION
This unit plays files with the file
extension (.aac/.m4a) as an AAC file.
Do not use the AAC file extension for
files other than AAC files. Otherwise,
it could result in noise or a
malfunction.
Playable WMA file specification
Playable WMA files are as follows:
Item
Specification
Sampling rate
Bit rate
Content
Windows Media Audio Version
7.0, 8.0, 9.0 (standard)
22.05 kHz (MID)
44.1/48/32 kHz (HI)
32―192 kbps (Version 7.0, 8.0)
32―320 kbps (Version 9.0)
l
l
CAUTION
This unit plays files with the file
extension (wma) as a WMA file. Do
not use the WMA file extension for
files other than WMA files.
Otherwise, it could result in noise or
a malfunction.
l
WMA files written under specifications
other than the indicated specification
may not play normally or files or folder
names may not display correctly.
Content
MPEG4 AAC-LC
8/11.025/12 kHz
16/22.05/24 kHz
32/44.1/48 kHz
24―320 kbps
AAC files written under specifications
other than the indicated specification
may not play normally or files or folder
names may not display correctly.
The file extension may not be provided
depending on the computer operating
system, version, software, or settings.
In this case, add the file extension
“.aac” or “.m4a” to the end of the file
name, and then write it to the memory.
qOperating Tips for iPod
This unit supports playback of music files
recorded to an iPod.
l
iPod is a trademark of Apple Inc.,
registered in the U.S. and other
countries.
6-21
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page218
Friday, July 10 2015 5:26 PM
Black plate (218,1)
Interior Comfort
Audio System
l
l
l
l
iPod classic is a trademark of Apple
Inc., registered in the U.S. and other
countries.
iPod nano is a trademark of Apple Inc.,
registered in the U.S. and other
countries.
iPod touch is a trademark of Apple
Inc., registered in the U.S. and other
countries.
iPhone is a trademark of Apple Inc.,
registered in the U.S. and other
countries.
Connectable iPods are as follows:
l iPod: 5G
l iPod classic
l iPod nano: 1/2/3/4/5/6G
*1
l iPod touch
*1
l iPhone
: 3G/3GS/4
*1 Only iPod functions
CAUTION
Ø Remove the iPod when it is not in
use. Because the iPod is not
designed to withstand excessive
changes in temperature inside the
cabin, it could be damaged or the
battery may deteriorate due to the
excessive temperature or humidity
inside the cabin if it is left in the
vehicle.
Ø If data in the iPod is lost while it is
connected to the unit, Mazda
cannot guarantee recovery of any
lost data.
Ø If the iPod battery is deteriorated,
the iPod may not recharge and
playback may not be possible
when it is connected to the unit.
Replace the iPod battery
immediately.
Ø For the details on using the iPod,
refer to the iPod instruction
manual.
Ø When connecting the iPod to a
USB port, all commands are made
from the audio unit. iPod control is
not possible.
NOTE
The audio unit cannot display images or
videos stored in an iPod.
6-22
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page219
Friday, July 10 2015 5:26 PM
Black plate (219,1)
Interior Comfort
Audio System
Audio Set
Audio information is displayed on the information display.
Power/Volume/Sound Controls .............................................................................. page 6-24
Operating the Radio ............................................................................................... page 6-28
Operating the Satellite Radio ................................................................................. page 6-30
Operating the Compact Disc (CD) Player .............................................................. page 6-42
Operating the Auxiliary jack/USB port .................................................................. page 6-45
Error Indications ..................................................................................................... page 6-46
6-23
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page220
Friday, July 10 2015 5:26 PM
Black plate (220,1)
Interior Comfort
Audio System
qPower/Volume/Sound Controls
Power/Volume dial
Audio control dial
Power ON/OFF
Audio sound adjustment
Switch the ignition to ACC or ON.
1. Press the audio control dial to select the
function. The selected function will be
indicated.
Press the power/volume dial to turn the
audio system on.
Press the power/volume dial again to turn
the audio system off.
NOTE
To prevent the battery from being discharged,
do not leave the audio system on for a long
period of time when the engine is not running.
Volume adjustment
To adjust the volume, turn the power/
volume dial.
Turn the power/volume dial to the right to
increase volume, to the left to decrease it.
6-24
Form No.8FA7-EA-15G
*1 Depending on the mode selected, the
indication changes.
*2 Depending on the model, this
function, may not be available.
Mazda5_8FA7-EA-15G_Edition2 Page221
Friday, July 10 2015 5:26 PM
Black plate (221,1)
Interior Comfort
Audio System
2. Turn the audio control dial to adjust the
selected functions as follows:
Indication
Turn Left Turn Right
Select the desired ALC mode.
Mode
Volume change
No change
Select mode
Minimum
Decrease
Increase
bass
bass
Decrease
Increase
treble
treble
Shift the
Shift the
sound to the sound to the
front
rear
Shift the
Shift the
sound to the sound to the
left
right
off
on
Select mode
NOTE
l
l
Medium
Depending on the type of audio unit, the
order in which the functions appear differs.
About 5 seconds after selecting any mode,
the volume function will be automatically
selected. To reset bass, treble, fade, and
balance, press the audio control dial for 2
seconds. The unit will beep and “CLEAR”
will be displayed.
Maximum
Turn the audio control dial to select ALC
OFF or ALC LEVEL1―7 modes. The
selected mode will be indicated.
Automatic Level Control (ALC)
The automatic level control (ALC) is a
feature that automatically adjusts audio
volume and sound quality according to
the vehicle speed.
The volume increases in accordance with
the increase in vehicle speed, and
decreases as vehicle speed decreases.
6-25
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page222
Friday, July 10 2015 5:26 PM
Interior Comfort
Audio System
BEEP setting
The beep-sound when operating the audio
system can be set on or off.
BT SETUP mode í
Music and other audio such as voice data
recorded on portable audio devices and
mobile phones available on the market
which are equipped with the Bluetooth®
transmission function can be listened to
via wireless transmission over the
vehicle's speakers. Using the BT SETUP
mode, these devices can be programmed
to the Bluetooth® unit or changed.
Refer to Bluetooth® Audio on page 6-60.
6-26
í
Some models.
Form No.8FA7-EA-15G
Black plate (222,1)
Mazda5_8FA7-EA-15G_Edition2 Page223
Friday, July 10 2015 5:26 PM
Black plate (223,1)
MEMO
6-27
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page224
Friday, July 10 2015 5:26 PM
Black plate (224,1)
Interior Comfort
Audio System
qOperating the Radio
Band selector button
Manual tuning dial/Mute button
Seek tuning buttons
Auto memory button
Channel preset buttons
Scan button
Radio ON
Press a band selector button (
turn the radio on.
Tuning
) to
Band selection
Successively pressing the band selector
) switches the bands as
button (
follows: FM1→FM2→AM.
The selected mode will be indicated. If
FM stereo is being received, “ST” will be
displayed.
NOTE
If the FM broadcast signal becomes weak,
reception automatically changes from
STEREO to MONO for reduced noise, and the
“ST” indicator will go out.
6-28
Form No.8FA7-EA-15G
The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
on preset channels.
Manual tuning
Turning the manual tuning dial will
change the frequency higher or lower.
Seek tuning
Pressing the seek tuning button ( , )
will cause the tuner to seek a higher or
lower frequency automatically.
NOTE
If you continue to press and hold the button,
the frequency will continue changing without
stopping.
Mazda5_8FA7-EA-15G_Edition2 Page225
Friday, July 10 2015 5:26 PM
Black plate (225,1)
Interior Comfort
Audio System
Scan tuning
Press the scan button (
) to
automatically sample strong stations.
Scanning stops at each station for about 5
seconds. To hold a station, press the scan
) again during this interval.
button (
Preset channel tuning
The 6 preset channels can be used to store
6 AM and 12 FM stations.
1. To set a channel first select AM, FM1,
or FM2. Tune to the desired station.
2. Depress a channel preset button for
about 2 seconds until a beep sound is
heard. The preset channel number and
station frequency will be displayed.
The station is now held in the memory.
After scanning is completed, the station
with the strongest frequency will be tuned
and its frequency displayed.
Press and release the auto memory button
) to recall stations from the auto(
stored stations. One stored station will be
selected each time; its frequency and
channel number will be displayed.
NOTE
If no stations can be tuned after scanning
operations, “A” will be displayed.
Mute
Press the mute button (
) once to
mute the audio. Press it again to resume
audio output.
3. Repeat this operation for the other
stations and bands you want to store.
To tune one in the memory, select AM,
FM1, or FM2 and then press its
channel preset button. The station
frequency and the channel number will
be displayed.
Auto memory tuning
This is especially useful when driving in
an area where the local stations are not
known. Additional AM/FM stations can
be stored without disturbing the
previously set channels.
Press and hold the auto memory button
) for about 2 seconds until a beep
(
sound is heard; the system will
automatically scan and temporarily store
up to 6 stations with the strongest
frequencies in each selected band in that
area.
6-29
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page226
Friday, July 10 2015 5:26 PM
Black plate (226,1)
Interior Comfort
Audio System
qOperating the Satellite Radio í
Seek tuning buttons
Category buttons
Channel preset buttons
Satellite button
Text button
Manual tuning dial/Instant replay button
Information display
All operations of the satellite radio are displayed on the Information display.
Channel number, Channel name, Category name, Artist name, Song title, ID
code, Preset channel number, Bank number, Error signs
6-30
í
Some models.
Form No.8FA7-EA-15G
Scan button
Scroll button
Mazda5_8FA7-EA-15G_Edition2 Page227
Friday, July 10 2015 5:26 PM
Black plate (227,1)
Interior Comfort
Audio System
NOTE
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
- Increase the separation between the
equipment and tuner.
- Connect the equipment into an outlet on a
circuit different from that to which the tuner is
connected.
- Consult the dealer or an experienced radio/
TV technician for help.
What is satellite radio?
With over 130 channels, SIRIUS Satellite
Radio brings you more of what you love.
Get 69 channels of 100 % commercialfree music, plus all your favorite sports,
news, talk and entertainment. Everything
worth listening to is now on SIRIUS.
100 % Commercial-free Music―With
music from every genre, artist-dedicated
channels, live performances and more,
SIRIUS is the home of 100 %
commercial-free music.
Live Sports Play-by-Play & Expert
Talk―Hear every NFL game, every
NASCAR® race and college sports
coverage from over 150 schools. Plus
24/7 sports talk with channels like
SIRIUS NFL Radio, SIRIUS NASCAR
Radio and more.
Exclusive Entertainment and
Talk―The biggest names, compelling
talk, hilarious comedy. Hear Howard
Stern, Martha Stewart, Jamie Foxx, Blue
Collar Comedy, Playboy Radio, political
talk and more.
World-class News―Stay informed with
FOX, CNN, CNBC, NPR®, BBC and
more.
Plus local traffic and weather.
Family & Kids―Entertain the entire
family with Radio Disney, Kids Place
Live, Laugh USA and more.
Sign up for SIRIUS Radio today! For
more information, visit
www.siriusxm.com.
Satellite radio is only available in regions
providing satellite radio service (some
areas of the United States and Canada).
How to Activate Satellite Radio
You must call SIRIUS to activate your
service. Activation is free and takes only a
few minutes.
6-31
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page228
Friday, July 10 2015 5:26 PM
Black plate (228,1)
Interior Comfort
Audio System
SIRIUS service uses an ID code to
identify your radio. This code is needed to
activate SIRIUS service, and report any
problems.
To activate you SIRIUS radio tuner, call a
SIRIUS customer service specialist at 1888-539-7474 or you can visit SIRIUS
online at www.siriusxm.com.
Please have the following information
ready:
l SIRIUS ID (12-digit electronic serial
no., or ESN*)
l Valid credit card information (may not
be required at initial sign-up)
*ESN: Electronic Serial Number
Displaying the SIRIUS ID (ESN)
SIRIUS radio mode selection
) is
When the satellite button (
pressed during ACC ON, it will play the
last SIRIUS channel in use before the
mode was switched over to another mode
or the power was turned off.
) is
When the satellite button (
pressed in a mode other than the SIRIUS
mode, the last channel in use will be
received.
)
Every time the satellite button (
is pressed, the bank changes in the order
shown below.
SR1
SR2
SR3
When the manual tuning dial is turned to
channel 0, a 12-digit Electronic Serial
Number (ESN) for the SIRIUS tuner is
displayed.
(If the SIRIUS ID (ESN) for the tuner
does not display)
If “ESN FAIL” is displayed after channel
0 is selected by operating the manual
tuning dial, contact an Authorized Mazda
Dealer.
Be sure you are parked outside with a
clear view of open sky, you will be
instructed to turn on your radio (in SAT
mode and tuned to channel 184).
Activation typically takes only 2―5
minutes.
SIRIUS operation
All operations of the satellite radio are
conducted by means of the audio unit.
6-32
Form No.8FA7-EA-15G
NOTE
SR1, SR2 and SR3: six stations can be stored
in each bank for convenient access to your
favorite stations.
Operation in the initial state
It may take some time to start up the
equipment when it is in the initial state,
when there is a change in the user's
subscription condition, or when the
SIRIUS channel map is changed.
Mazda5_8FA7-EA-15G_Edition2 Page229
Friday, July 10 2015 5:26 PM
Black plate (229,1)
Interior Comfort
Audio System
“UPDATING xx%” is displayed when the
SIRIUS channel map is changed. If the
unit is initialized or the user contract
content is changed, “SUBSCRIPTION”
and “UPDATED” is displayed. Updating
could take as long as three minutes
depending on the geographical area.
When the unit is in an initialized state,
channel 184 is displayed after the display
indicates “UPDATING 100%”. If the
SIRIUS channel map or the user contract
content is changed, the channel prior to
the change is displayed after
“SUBSCRIPTION” and “UPDATED” is
displayed. After the initialization display,
it may take as long as 12 seconds to
receive channel 184.
NOTE
Do not perform the following operation while
“UPDATING” is displayed. Otherwise, the
updating procedure will be cancelled.
l Turning off the audio power
l Switching to other modes
l Switching the ignition off
Unsubscribed channel
When a selected station has not been
subscribed to, the display indicates the
following:
After the channel number is displayed,
888] and [539
SIRI]
[CALL
(Flashes alternately) is displayed.
NOTE
When the subscription contract is canceled, all
of the channels including channel 184 appear
as unsubscribed.
Invalid channel
The display switches between [SR
(bank number) INVALID] and [SR
(bank number) CHANNEL] only when
a selected channel is not broadcasting.
NOTE
If the last channel selected has become
unavailable because of a channel update the
above indication is displayed until any button
is pressed.
Preset channel programming
When the SIRIUS mode is switched to
another mode, or when the power is
turned off, the present channel which is
being received is stored as the last
channel.
Channel selection
Turning the manual tuning dial allows you
to select the desired receiving channel.
l Turn the knob clockwise: Channel Up
l Turn the knob counterclockwise:
Channel Down
(Programming with “channel number”
display)
1. Select the desired channel to be
programmed. At this point, the
following is displayed:
(bank number) (channel
[SR
number)]
2. Keep pressing the channel preset
button for 1.5 seconds or more.
The programming process is complete
after the channel number flashes. Then,
(bank number)] is displayed
[SR
and a beep sound is heard at the same
time.
(bank number) CH
3. [SR
(preset number) (channel number)]
are displayed.
6-33
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page230
Friday, July 10 2015 5:26 PM
Black plate (230,1)
Interior Comfort
Audio System
(Programming with “text” display (e.g.
channel name))
1. Select the desired channel to be
programmed. At this point, the
following is displayed:
(bank number) (selected text
[SR
(e.g. channel name))]
2. Keep pressing the channel preset
button for 1.5 seconds or more.
The programming process is complete
after the text (e.g. channel name)
(bank number)]
flashes. Then, [SR
is displayed and you will hear beep
sound at the same time.
(bank number) CH
3. [SR
(preset number) (channel number)]
are displayed.
4. Three seconds later, it returns to normal
(bank number) (text
display. [SR
(e.g. channel name))]
Category change
Press the category button ( or ) and
select the desired category.
l Press the category button (
):
Category up
l Press the category button (
):
Category down
Every time the category button ( ) is
pressed, the category is changed over in
the order shown below.
At this time, the lowest (smallest-number)
channel within the category indicated is
received.
When the highest (or lowest) category is
reached, the category is changed over in
the order shown below.
Highest category → All categories →
Lowest category
NOTE
While all categories are selected, all channels
covering a category can be accessed
(Category off condition).
NOTE
Six stations can be stored in each bank, SR1,
SR2, and SR3 for convenient access to your
favorite stations.
Preset channel call-up
Press and release the channel preset
button,
(bank number) CH
(preset
[SR
number) (channel number)] appears.
When the preset button is pressed during
text mode, its channel number is
displayed first for three second and then
its text is displayed.
NOTE
In the initial setting, all channels are preset to
184.
6-34
Form No.8FA7-EA-15G
Channel selection within a category
If you are in a selected category and the
channel number is displayed, turning the
manual tuning dial moves the channel
number up/down in that category.
l Turn the manual tuning dial clockwise:
Channel Up
l Turn the manual tuning dial
counterclockwise: Channel Down
NOTE
The channel number needs to be indicated in
the display to use manual tuning dial for this
function.
Mazda5_8FA7-EA-15G_Edition2 Page231
Friday, July 10 2015 5:26 PM
Black plate (231,1)
Interior Comfort
Audio System
Scan tuning
Press the scan button (
) to
automatically sample stations. Scanning
stops at each station for about five
seconds. To hold a station, press the scan
) again during this interval.
button (
NOTE
l
l
Unsubscribed channels, invalid channels,
parental lock channels and channel 0 are
not subject to the scan, therefore these
channels will be skipped automatically.
You can scan all channels while all
categories are selected. If you are in a
selected category, you can only scan the
channels in that category.
Channel number, channel name,
category, artist, song titles and info
display
Each time the text button (
) is
pressed during SIRIUS reception, the
display of the text data is changed over in
the order shown below.
Channel number
Channel name
Category
name
Info
Song title
Artist name
NOTE
l
l
Eight characters are displayed on one
screen.
To display the rest of the characters of a
long title, press the scroll button (
).
The display scrolls the next eight
characters. Press the scroll button (
)
again after the last eight characters have
been displayed to return to the beginning of
the title.
(Channel number display)
l When the text button (
) is
pressed while in info display mode, the
mode changes to the channel number
display mode.
(Channel name display)
l When the text button (
) is
pressed while in channel number
display mode, it changes to channel
name display mode.
l There are short (eight fixed characters)
and long names for the channel name.
l The long name is displayed first, and
three seconds later the short name is
displayed. If there is no short name, the
long name is displayed.
l To display the rest of the characters of
the channel name, press the scroll
). The display scrolls the
button (
next eight characters. Press the scroll
) again after the last eight
button (
characters have been displayed to
return to the beginning of the title.
l Press the scroll button (
) while
the short name is displayed to switch
the display to the long name.
l Three seconds after scrolling the long
name, the display automatically returns
to the first part of the long name. Three
more seconds and the short name
appears.
6-35
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page232
Friday, July 10 2015 5:26 PM
Black plate (232,1)
Interior Comfort
Audio System
l
If there is no channel name,
“No TITLE” is displayed.
(Category name display)
l When the text button (
) is
pressed while in channel name display
mode, it changes to the category name
display mode.
l There are short (eight fixed characters)
and long names for the category name.
l The long name is displayed first, and
three seconds later the short name is
displayed. If there is no short name, the
long name is displayed.
l To display the rest of the characters of
the category name, press the scroll
). The display scrolls the
button (
next eight characters. Press the scroll
) again after the last eight
button (
characters have been displayed to
return to the beginning of the title.
l Press the scroll button (
) while
the short name is displayed to switch
the display to the long name.
l Three seconds after scrolling the long
name, the display automatically returns
to display the first part of the long
name. Three more seconds and the
short name appears.
l If there is no category name,
“No CATEGORY” is displayed.
(Artist name display)
l When the text button (
) is
pressed while in category name display
mode, it changes to the artist name
display mode.
l To display the rest of the characters of
the artist's name, press the scroll button
). The display scrolls the next
(
eight characters. Press the scroll button
) again after the last eight
(
characters have been displayed to
return to the beginning of the title.
6-36
Form No.8FA7-EA-15G
l
l
Three seconds after scrolling the artist
name, the display automatically return
to display the first part of the artist's
name.
If there is no artist's name,
“No ARTIST” is displayed.
(Song title display)
l When the text button (
) is
pressed while in artist name display
mode, it changes to the song title
display mode.
l To display the rest of the characters of
the song title, press the scroll button
). The display scrolls the next
(
eight characters. Press the scroll button
) again after the last eight
(
characters have been displayed to
return to the beginning of the title.
l Three more seconds after scrolling the
song title, the display automatically
returns to display the first part of the
song title.
l If there is no song title, “No SONG” is
displayed.
(INFO (such as composer's name)
display)
l When the text button (
) is
pressed while in song title display
mode, it changes to the INFO display
mode.
l To display the rest of the characters of
the composer's name, press the scroll
). The display scrolls the
button (
next eight characters. Press the scroll
) again after the last eight
button (
characters have been displayed to
return to the beginning of the title.
l Three seconds after scrolling the text,
the display automatically returns to
display the first part of the text.
l If there is no composer name,
“No INFO” is displayed.
Mazda5_8FA7-EA-15G_Edition2 Page233
Friday, July 10 2015 5:26 PM
Black plate (233,1)
Interior Comfort
Audio System
Instant replay
This function allows you to rewind and
replay the program that you were
previously or are currently listening to.
Press the instant replay button ( ).
When the seek tuning button ( ) is
pressed (about 1.5 seconds), playback
starts from the beginning of the current
program.
When the seek tuning button ( ) is
pressed twice, playback starts from the
beginning of the previous program.
When the seek tuning button ( ) is
pressed for about 1.5 seconds or longer,
the program is reversed while the button
is being pressed.
When the seek tuning button ( ) is
pressed (about 1.5 seconds), playback
starts from the beginning of the next
program. When the seek tuning button
( ) is pressed (about 1.5 seconds) while
the last program is being played, the
instant replay mode is cancelled.
When the seek tuning button ( ) is
pressed for 1.5 seconds or longer, the
program is fast-forwarded while the
button is being pressed. When pressing
and holding the button until the end of the
program, the instant replay mode is
cancelled.
When the instant replay button ( ) is
pressed again, playback is paused, or
playback starts if it has been paused.
Instant replay (PAUSE)
If the instant replay button ( ) is
pressed while the instant replay mode is
off, instant replay mode is turned on in a
paused condition (PAUSE). Press the
instant replay button ( ) again to
resume playback from the point at which
it was paused.
NOTE
l
l
If the channel is changed, the instant replay
buffer data is deleted.
After turning on the power and switching to
SIRIUS digital satellite radio mode, the
instant replay mode is not available for
several seconds after changing channels.
Initialization of ID code
If the registered ID code is forgotten,
return the ID code to the default [0000] by
performing the following steps:
Setting condition: SAT mode
(Master code input preparation)
1. Press and hold the scan button (
then press channel preset button 4.
Hold both buttons together for 1.5
seconds.
),
2. “ENTER PIN” appears for three
seconds which indicates that it is in
code input mode.
3. “SR1 - - - -” appears, which indicates
that it is ready for code input.
(Master code input)
4. Input the master code using the channel
preset buttons 1-4.
(The master code is already set at the
time of factory shipment.)
(Master code input determination)
5. Determine the master code which has
been input by pressing the scan button
).
(
6. “PIN CLEARED” appears which
indicates that the master code input has
been completed.
7. The ID code is set to the default [0000]
and the initialization process is
completed.
6-37
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page234
Friday, July 10 2015 5:26 PM
Black plate (234,1)
Interior Comfort
Audio System
NOTE
Master code:
The Master Code is used to initialize or reinitialize the ID code in the event that the code
is not set to [0000] and/or the personalized ID
code is not known. The initialization process
resets the ID code to [0000]. The master code
can potentially defeat the intent of the security
of the parental lock if it is located by persons
not authorized by the owner to access certain
channels.
SIRIUS Satellite Radio Master Code: [0913]
NOTE
l
l
l
When a numeric value other than the
master code is input and the scan button
(
) is pressed, “SR1 Err” is displayed
and then it returns to the “SR1 - - - -”
display again.
If an ID code is not input for ten seconds,
“Err” is displayed and it returns to the
former display.
Channel preset buttons 1, 2, 3, 4 and the
scan button (
) are used for inputting
the ID code. Buttons 5 and 6 cannot be
used.
6-38
Form No.8FA7-EA-15G
NOTE
The registered ID code is the default [0000] at
the time of factory shipment. If [0000] results
in “Err” on the display, go to the
“INITIALIZATION OF ID CODE” section to
reset to [0000].
(Verification with the registered ID
code)
5. Determine the input code by pressing
).
the scan button (
7. If it matches with the previously
registered code, “ENTER PIN” appears
again and it switches to code input
mode.
(Registered ID code input)
2. “ENTER PIN” appears for three
seconds which indicates that it is in
code input mode.
4. Input the registered ID code using
channel preset buttons 1-4.
Example: When the registered ID code
is “2323”, input “2323”. At this time
“SR1 2323” is displayed.
Press 1 for the first digit, 2 for the
second, 3 for the third, and 4 for the
last digit. For example, if your number
is 2323, press 1 three times (includes
0), 2 four times, 3 three times, and 4
four times. If the display goes off while
inputting, begin from Step 1.
6. If it does not match with the previously
registered code, “SR1 Err” is displayed
and then it returns to “SR1 - - - -”.
Change of ID code
Setting condition: SAT mode
When changing the ID code, the new ID
code is input after the previous one is
input first.
1. Press and hold the scan button (
then press channel preset button 5.
Hold both buttons together for 1.5
seconds.
3. “SR1 - - - -” appears, which indicates
that it is ready for code input.
),
8. “SR1 - - - -” appears, and it is ready for
input of the new ID code.
(New ID code input)
9. Input the new ID code using channel
preset buttons 1-4.
Example: If “1234” is input as the new
code, “SR1 1234” is displayed.
Mazda5_8FA7-EA-15G_Edition2 Page235
Friday, July 10 2015 5:26 PM
Black plate (235,1)
Interior Comfort
Audio System
(New ID code input determination)
(Registered ID code input)
10. Determine the new ID code which
has been input by pressing the scan
).
button (
5. Input the registered ID code using
channel preset buttons 1-4. Example: If
the registered ID code is “2323”, input
“2323”. At this time “SR1 2323” is
displayed.
11. “PIN CHANGED” appears for three
seconds which indicates that the new
ID code input has been completed.
12. It returns to the former display.
6. Determine the code which has been
input by pressing the scan button
).
(
NOTE
l
l
(Registered ID code input
determination)
If an ID code is not input for ten seconds,
“Err” is displayed and it returns to the
former display.
Channel preset buttons 1, 2, 3, 4 and the
scan button (
) are used for input of
the ID code. Buttons 5 and 6 cannot be
used.
7. If it does not match the registered code,
“SR1 Err” is displayed and then it
returns to “SR1 - - - -”.
8. If it matches the registered code,
“SR1 LOCK” appears for three
seconds which indicates that the code
input has been completed.
Individual channel locking
If a channel is locked, the channel is
muted.
9. “SR1 LOCK 100” appears which
indicates that the parental lock is
activated. At this time, mute is on and
no sound is heard.
NOTE
If the registered ID code is forgotten, return
the ID code to the default [0000]. (See
“INTIALIZATION OF ID CODE” section)
NOTE
l
(Locking a channel)
1. Select a channel to be locked by
turning the manual tuning dial.
Example: Select channel 100
l
(Registered ID code input preparation)
2. Press and hold the scan button (
then press channel preset button 6.
Hold both buttons together for 1.5
seconds.
3. “ENTER PIN” appears for three
seconds which indicates that it is in
code input mode.
4. “SR1 - - - -” appears which indicates
that it is ready for code input.
),
If an ID code is not input for ten seconds,
“Err” is displayed and it returns to the
former display.
Channel preset buttons 1, 2, 3, 4 and the
scan button (
) are used for input of
the ID code. Buttons 5 and 6 cannot be
used.
Lock cancellation
Setting condition: SAT mode
(Releasing a locked channel)
1. Select a channel to be released by
turning the manual tuning dial.
Example: Select the locked channel
(i.e. 100). At this time,
“SR1 LOCK 100” is displayed.
6-39
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page236
Friday, July 10 2015 5:26 PM
Black plate (236,1)
Interior Comfort
Audio System
(Registered ID code input preparation)
2. Press and hold the scan button (
then press channel preset button 6.
Hold both buttons together for 1.5
seconds.
),
3. “ENTER PIN” appears for three
seconds which indicates that it is in
code input mode.
4. “SR1 - - - -” appears, which indicates
that it is ready for code input.
(Registered ID code input)
5. Input the registered ID code using
channel preset buttons 1-4. Example:
When the registered ID code is “2323”,
input “2323”. At this time “SR1 2323”
is displayed.
NOTE
If “Err” is displayed, go to the
“INITIALIZATION OF ID CODE” section to
reset the ID code to [0000].
(Registered ID code input
determination)
6. Determine the input code by pressing
).
the scan button (
7. If it does not match the registered code,
“SR1 Err” is displayed and then it
returns to “SR1 - - - -”.
8. If it matches the registered code,
“SR1 UNLOCK” appears for three
seconds which indicates that the code
input has been completed.
9. “SR1 100” appears which indicates that
the parental lock is off. At this time,
sound is heard.
6-40
Form No.8FA7-EA-15G
NOTE
l
l
If an ID code is not input for ten seconds,
“Err” is displayed and it returns to the
former display.
Channel preset buttons 1, 2, 3, 4 and the
scan button (
) are used for input of
the ID code. Buttons 5 and 6 cannot be
used.
Mazda5_8FA7-EA-15G_Edition2 Page237
Friday, July 10 2015 5:26 PM
Black plate (237,1)
MEMO
6-41
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page238
Friday, July 10 2015 5:26 PM
Black plate (238,1)
Interior Comfort
Audio System
qOperating the Compact Disc (CD) Player
Play/Pause button/File dial
Track up/Fast-forward button
Folder up button
CD slot
Load button
CD play button
Music/MP3/WMA/
AAC CD player
Folder down button
Playable data
l
l
Repeat button
CD eject button
Track down/Reverse button
Type
Random button
Music data (CD-DA)
MP3/WMA/AAC file
NOTE
If a disc has both music data (CD-DA) and
MP3/WMA/AAC files, playback of the two or
three file types differs depending on how the
disc was recorded.
Inserting the CD
Insert the CD into the slot, label-side up.
The auto-loading mechanism will set the
CD and begin play.
NOTE
There will be a short lapse before play begins
while the player reads the digital signals on
the CD.
6-42
Form No.8FA7-EA-15G
Text button
Scan button
Scroll button
Ejecting the CD
Press the CD eject button (
CD.
) to eject the
Playback
Press the CD play button ( ) to start
play when a CD is in the unit.
If a CD is not in the unit when the CD
play button ( ) is pressed, “NO DISC”
will flash on and off.
NOTE
When the load button (
) is pressed, the
CD will load and play even if the CD eject
button ( ) had been previously pressed.
Pause
To stop playback, press the Play/Pause
button ( ).
Press the button again to resume
playback.
Mazda5_8FA7-EA-15G_Edition2 Page239
Friday, July 10 2015 5:26 PM
Black plate (239,1)
Interior Comfort
Audio System
Fast-forward/Reverse
Press and hold the fast-forward button
( ) to advance through a track at high
speed.
Press and hold the reverse button ( ) to
reverse through a track at high speed.
Repeat playback
Track search
2. Press the button again to cancel the
repeat playback.
Press the track up button ( ) or turn the
file dial clockwise once to skip forward to
the beginning of the next track.
Press the track down button ( ) or turn
the file dial counterclockwise once to skip
back to the beginning of the current track.
Folder search (during MP3/WMA/AAC
CD playback)
To change to the previous folder, press the
folder down button ( ), or press the
folder up button ( ) to advance to the
next folder.
Music scan
During music CD playback
This function scans the titles on a CD and
plays 10 seconds of each song to aid you
in finding a song you want to listen to.
During MP3/WMA/AAC CD playback
This function scans the titles in a folder
currently being played and plays 10
seconds of each song to aid you in finding
a song you want to listen to.
) during
Press the scan button (
playback to start the scan play operation
(the track number will flash).
) again to
Press the scan button (
cancel scan playback.
During music CD playback
) during
1. Press the repeat button (
playback to play the current track
repeatedly. “RPT” is displayed.
During MP3/WMA/AAC CD playback
(Track repeat)
) during
1. Press the repeat button (
playback to play the current track
repeatedly. “TRACK RPT” is
displayed.
2. To cancel the repeat playback, press the
button again after 3 seconds.
(Folder repeat)
) during
1. Press the repeat button (
playback, and then press the button
again within 3 seconds to play the
tracks in the current folder repeatedly.
“FOLDER RPT” is displayed.
2. Press the button again to cancel the
repeat playback.
Random playback
Tracks are randomly selected and played.
During music CD playback
) during
1. Press the random button (
playback to play the tracks on the CD
randomly. “RDM” is displayed.
2. Press the button again to cancel the
random playback.
NOTE
If the unit is left in scan, normal playback will
resume where scan was selected.
6-43
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page240
Friday, July 10 2015 5:26 PM
Black plate (240,1)
Interior Comfort
Audio System
During MP3/WMA/AAC CD playback
MP3/WMA/AAC CD
(Folder random)
File number/Elapsed time
) during
1. Press the random button (
playback to play the tracks in the folder
randomly. “FOLDER RDM” is
displayed.
Folder number/File number
2. To cancel the random playback, press
the button again after 3 seconds.
File name
(CD random)
Folder name
) during
1. Press the random button (
playback, and then press the button
again within 3 seconds to play the
tracks on the CD randomly.
“DISC RDM” is displayed.
Album name (ID3 Tag)
Song name (ID3 Tag)
2. Press the button again to cancel the
random playback.
Switching the display
For files with a file name and other
information that have been input, the
display switches between display of the
file name and other information each time
) is pressed during
the text button (
playback.
Music CD (If CD-TEXT capable)
Track number/Elapsed time
Track number
Track name
Album name
Artist name
Artist name (ID3 Tag)
NOTE
l
l
The information viewable in the display is
only CD information (such as artist name,
song title) which has been recorded to the
CD.
This unit cannot display some characters.
Characters which cannot be displayed are
indicated by an asterisk ( ).
Display scroll
Only 12 characters can be displayed at
one time.
To display the rest of the characters of a
).
long title, press the scroll button (
The display scrolls the next 12 characters.
) again after
Press the scroll button (
the last 12 characters have been displayed
to return to the beginning of the title.
NOTE
The number of characters which can be
displayed is limited.
6-44
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page241
Friday, July 10 2015 5:26 PM
Black plate (241,1)
Interior Comfort
Audio System
Message display
If “CHECK CD” is displayed, it means
that there is some CD malfunction. Check
the CD for damage, dirt, or smudges, and
then properly reinsert. If the message
appears again, take the unit to an
Authorized Mazda Dealer for service.
qOperating the Auxiliary jack/
USB port
Audio can be heard from the vehicle's
speakers by connecting a commerciallyavailable portable audio unit to the
auxiliary jack.
Use a commercially-available, nonimpedance (3.5 ) stereo mini plug cable.
Contact an Authorized Mazda Dealer for
details.
In addition, audio can be played from the
vehicle's audio unit by connecting USB
device or an iPod to the USB port.
Refer to AUX/USB/iPod Mode on page
6-50.
6-45
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page242
Friday, July 10 2015 5:26 PM
Black plate (242,1)
Interior Comfort
Audio System
qError Indications
If you see an error indication on the display, find the cause in the chart. If you cannot clear
the error indication, take the vehicle to an Authorized Mazda Dealer.
Indication
ACQUIRING
ANTENNA FAIL
CHECK CD
Cause
Solution
Depending on the
surrounding conditions
(such as large trees, buildImprove reception by moving away from possible
ings, or tunnels) and special
obstructions. If the error indication continues to display,
weather conditions,
consult an Authorized Mazda Dealer.
SIRIUS radio reception
may be diminished or
temporarily interrupted.
Check the satellite radio antenna, antenna cable and
Satellite radio antenna
DLP antenna connector. If the error indication continues
malfunction
to display, consult an Authorized Mazda Dealer.
Insert the CD properly. If the error indication continues
CD is inserted upside down
to display, consult an Authorized Mazda Dealer.
Insert another CD properly. If the error indication
CD is defective
continues to display, consult an Authorized Mazda
Dealer.
NOTE
If a broken DLP* unit is replaced with a new unit, cancel the license for the broken unit and make
sure to carry out new registration for the replaced unit. If the license for the broken unit is not
canceled, you will be charged a reception fee for both units.
* DLP: Down Link Processor (SATELLITE RADIO Module)
6-46
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page243
Friday, July 10 2015 5:26 PM
Black plate (243,1)
Interior Comfort
Audio System
NOTE
Audio Control Switch
Operation
l
When the audio unit is turned on,
operation of the audio unit from the
steering wheel is possible.
NOTE
Because the audio unit will be turned off under
the following conditions, the switches will be
inoperable.
l When the ignition is switched off.
l When the power button on the audio unit is
pressed and the audio unit is turned off.
Without Bluetooth® Hands-Free
With Bluetooth® Hands-Free
l
The talk button, pick-up button, and hangup button are operable with the audio unit
turned off.
Mazda has installed this system to prevent
distraction while driving the vehicle and
using audio controls on the dashboard.
Always make safe driving your first priority.
qAdjusting the Volume
To increase the volume, press up the
volume switch.
To decrease the volume, press down the
volume switch.
Without Bluetooth® Hands-Free
With Bluetooth® Hands-Free
Pick-up button
Hang-up
button
Talk button
6-47
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page244
Friday, July 10 2015 5:26 PM
Black plate (244,1)
Interior Comfort
Audio System
qChanging the Source
Press the mode switch (
) to change
the audio source (FM1 radio → FM2
radio → AM radio → CD player →
SIRIUS1 → SIRIUS2 → SIRIUS3 →
AUX → BT audio → USB/iPod →
cyclical).
Without Bluetooth® Hands-Free
NOTE
CD, USB, iPod, SIRIUS digital satellite radio,
and BT audio modes cannot be selected in the
following cases:
l USB device, iPod, SIRIUS digital satellite
radio unit, or BT audio unit is not equipped
on the audio system.
l CD has not been inserted.
The AUX mode is unavailable unless you
connect a commercially available portable
audio unit (such as an MP3 player) to the
auxiliary jack. Connect a portable audio unit
or similar product on the market to the
auxiliary jack to listen to music or audio over
the vehicle's speakers. Change the audio
source to AUX mode (page 6-50).
qSeek Switch
Without Bluetooth® Hands-Free
With Bluetooth® Hands-Free
6-48
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page245
Friday, July 10 2015 5:26 PM
Black plate (245,1)
Interior Comfort
Audio System
With Bluetooth® Hands-Free
When playing a CD, USB, iPod, or BT
audio
Press the seek switch up to skip to the
next track.
Press the seek switch down to repeat the
current track.
Press and hold the seek switch in the up or
down position to continuously switch the
tracks up or down.
qMute Switch í
When listening to the radio or SIRIUS
digital satellite radio
Press the seek switch up or down. The
radio switches to the next/previous stored
station in the order that it was stored
(1―6).
(Radio)
Press and hold the seek switch in the up or
down position to seek all usable stations
at a higher or lower frequency whether
programmed or not.
(SIRIUS digital satellite radio)
Press and hold the seek switch in the up or
down position to seek all usable stations
at a higher or lower channel whether
programmed or not.
Press the mute switch ( ) once to mute
audio, press it again to resume audio
output.
NOTE
If the ignition is switched off with the audio
muted, the mute will be canceled.
Therefore, when the engine is restarted, the
audio is not muted. To mute the audio again,
press the mute switch ( ).
Without Bluetooth® Hands-Free
NOTE
During radio reception
Radio stations which have been previously
stored in the auto memory tuning can be called
up by pressing the seek switch up or down
while any radio station stored in the auto
memory tuning is being received. Radio
stations can be called up in the order they
were stored with each press of the switch up or
down.
í
Some models.
Form No.8FA7-EA-15G
6-49
Mazda5_8FA7-EA-15G_Edition2 Page246
Friday, July 10 2015 5:26 PM
Black plate (246,1)
Interior Comfort
Audio System
AUX/USB/iPod Mode
Audio can be heard from the vehicle's
speakers by connecting a commerciallyavailable portable audio unit to the
auxiliary jack.
A commercially-available, non-impedance
(3.5 ) stereo mini plug cable is required.
Contact an Authorized Mazda Dealer for
details.
In addition, audio can be played from the
vehicle audio device by connecting USB
device or an iPod to the USB port.
To use the auxiliary jack/USB port, pull
up its cover.
USB port
WARNING
Do not adjust the portable audio unit
or a similar product while driving the
vehicle:
Adjusting the portable audio unit or
a similar product while driving the
vehicle is dangerous as it could
distract your attention from the
vehicle operation which could lead to
a serious accident. Always adjust the
portable audio unit or a similar
product while the vehicle is stopped.
Do not allow the connection plug cord
to get tangled with the parking brake
or the shift lever:
Allowing the plug cord to become
tangled with the parking brake or
the shift lever is dangerous as it
could interfere with driving, resulting
in an accident.
Auxiliary jack
CAUTION
How to use AUX mode ....... page 6-51
How to use USB mode ........ page 6-52
How to use iPod mode ......... page 6-56
Error Indications .................. page 6-58
6-50
Form No.8FA7-EA-15G
Ø Always close the auxiliary jack/
USB port lid when it is not in use.
If foreign matter or liquid
penetrate the auxiliary jack/USB
port, it may cause a malfunction.
Ø Depending on the portable audio
device, noise may occur when the
device is connected to the vehicle
accessory socket. (If noise occurs,
do not use the accessory socket.)
Ø Do not place objects or apply force
to the auxiliary jack with the plug
connected.
Mazda5_8FA7-EA-15G_Edition2 Page247
Friday, July 10 2015 5:26 PM
Black plate (247,1)
Interior Comfort
Audio System
NOTE
l
l
l
l
l
l
l
l
This mode may not be usable depending on
the portable audio device to be connected.
Before using the auxiliary jack/USB port,
refer to the instruction manual for the
portable audio device.
Use a commercially-available, nonimpedance (3.5 ) stereo mini plug for
connecting the portable audio unit to the
auxiliary jack. Before using the auxiliary
jack, read the manufacturer's instructions
for connecting a portable audio unit to the
auxiliary jack.
To prevent discharging of the battery, do
not use the auxiliary input for long periods
with the engine off or idling.
When connecting a device to the auxiliary
jack or USB port, noise may occur
depending on the connected device. If the
device is connected to the vehicle's
accessory socket, the noise can be reduced
by unplugging it from the accessory socket.
Insert the plug to the auxiliary jack/USB
port securely.
Insert or pull out the plug with the plug
perpendicular to the auxiliary jack/USB
port hole.
Insert or remove the plug by holding its
base.
qHow to use AUX mode
Audio Unit
Audio Control
Switches
1. Switch the ignition to ACC or ON.
2. Press the power/volume dial to turn the
audio system on.
3. Press the source change button ( ) of
the audio unit or the mode switch
) of the audio control switches
(
on the steering wheel to change to the
AUX mode.
NOTE
l
l
l
l
When the device is not connected to the
auxiliary jack, the mode does not switch to
the AUX mode.
Set the volume of the portable audio unit to
the maximum within the range that the
sound does not become distorted, then
adjust the volume using the power/volume
dial of the audio unit or the up/down switch
of the audio control switch.
Audio adjustments other than audio volume
can only be done using the portable audio
device.
If the connection plug is pulled out from the
auxiliary jack while in AUX mode, noise
may occur.
6-51
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page248
Friday, July 10 2015 5:26 PM
Black plate (248,1)
Interior Comfort
Audio System
qHow to use USB mode
Random button
Play/Pause button/File dial
Track up/Fast-forward button
Folder up button
Folder down button
Track down/Reverse button
Type
USB mode
Playable data
MP3/WMA/AAC file
Playback
Text button
Source change button
Scan button
Scroll button
NOTE
l
l
1. Switch the ignition to ACC or ON.
l
2. Press the power/volume dial to turn the
audio system on.
3. Press the source change button ( ) of
the audio unit or the mode switch
) of the audio control switches
(
on the steering wheel to switch to the
USB mode and start playback.
Repeat button
l
When the USB device is not connected, the
mode does not switch to USB mode.
When there is no playable data in the USB
device, “NO CONTENTS” is indicated.
Playback of the USB device is in the order
of the folder numbers. Folders which have
no MP3/WMA/AAC files are skipped.
Do not remove the USB device while in the
USB mode. The data may be damaged.
Pause
To stop playback, press the Play/Pause
button ( ).
Press the button again to resume
playback.
Fast-forward/Reverse
Press and hold the fast-forward button
( ) to advance through a track at high
speed.
6-52
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page249
Friday, July 10 2015 5:26 PM
Black plate (249,1)
Interior Comfort
Audio System
Press and hold the reverse button ( ) to
reverse through a track at high speed.
2. To cancel the repeat playback, press the
button again after 3 seconds.
Track search
Press the track up button ( ) once to
skip forward to the beginning of the next
track.
Press the track down button ( ) within a
few seconds after playback begins to track
down to the beginning of the previous
track.
Press the track down button ( ) after a
few seconds have elapsed to start
playback from the beginning of the
current track.
(Folder repeat)
Folder search
(Folder random)
To change to the previous folder, press the
folder down button ( ), or press the
folder up button ( ) to advance to the
next folder.
) during
1. Press the random button (
playback to play the tracks in the folder
randomly. “FOLDER RDM” is
displayed.
Music Scan
2. To cancel the random playback, press
the button again after 3 seconds.
This function scans the titles in a folder
currently being played and plays ten
seconds of each song to aid you in finding
a song you want to listen to.
) during
Press the scan button (
playback to start the scan play operation
(the track number will flash). Press the
) again to cancel scan
scan button (
playback.
NOTE
) during
1. Press the repeat button (
playback, and then press the button
again within 3 seconds to play the
tracks in the current folder repeatedly.
“FOLDER RPT” is displayed.
2. Press the button again to cancel the
repeat playback.
Random playback
Tracks are randomly selected and played.
(All random)
) during
1. Press the random button (
playback, and then press the button
again within 3 seconds to play the
tracks on the USB device randomly.
“ALL RDM” is displayed.
2. Press the button again to cancel the
random playback.
If the unit is left in scan, normal playback will
resume where scan was selected.
Repeat playback
(Track repeat)
) during
1. Press the repeat button (
playback to play the current track
repeatedly. “TRACK RPT” is
displayed.
6-53
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page250
Friday, July 10 2015 5:27 PM
Black plate (250,1)
Interior Comfort
Audio System
Switching the display
For files with a file name and other
information that have been input, the
display switches between display of the
file name and other information each time
) is pressed during
the text button (
playback.
File number/Elapsed time
Folder number/File number
File name
Folder name
Album name
Song name
Artist name
NOTE
l
l
The information (artist name, music name)
is displayed only when the USB device
information in the USB device has
information which can be displayed on the
screen.
This unit cannot display some characters.
Characters which cannot be displayed are
indicated by an asterisk ( ).
Display scroll
Only 12 characters can be displayed at
one time.
6-54
Form No.8FA7-EA-15G
To display the rest of the characters of a
).
long title, press the scroll button (
The display scrolls the next 12 characters.
) again after
Press the scroll button (
the last 12 characters have been displayed
to return to the beginning of the title.
NOTE
The number of characters which can be
displayed is restricted.
Error Messages
When the message “CHECK USB” is
displayed, it indicates that there is some
error in the USB device. Verify that the
content recorded in the USB device has
MP3/WMA/AAC files and re-connect
correctly. If the message reappears, have
the unit checked by an Authorized Mazda
Dealer.
Mazda5_8FA7-EA-15G_Edition2 Page251
Friday, July 10 2015 5:27 PM
Black plate (251,1)
MEMO
6-55
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page252
Friday, July 10 2015 5:27 PM
Black plate (252,1)
Interior Comfort
Audio System
qHow to use iPod mode
Category down button
Category up button
Random button
Repeat button
Track up/Fast-forward button
Track down/Reverse button
List up button
List down button
Text button
Source change button
Scan button
Scroll button
Play/Pause button/File dial
Connectable iPod is as follows:
l iPod: 5G
l iPod classic
l iPod nano: 1/2/3/4/5/6G
*1
l iPod touch
*1
l iPhone
: 3G/3GS/4
*1 For only iPod functions
3. Press the source change button ( ) of
the audio unit or the mode switch
) of the audio control switches
(
on the steering wheel to switch to the
iPod mode and start playback.
NOTE
l
NOTE
The iPod functions on the iPod cannot be
operated while it is connected to the unit
because the unit controls the iPod functions.
Playback
1. Switch the ignition to ACC or ON.
2. Press the power/volume dial to turn the
audio system on.
6-56
Form No.8FA7-EA-15G
l
l
When an iPod is not connected, the mode
does not switch to the iPod mode.
When there is no playable data in the iPod,
“NO CONTENTS” is flashed.
Do not remove the iPod while in the iPod
mode. Otherwise, the data could be
damaged.
Pause
To stop playback, press the Play/Pause
button ( ).
Press the button again to resume
playback.
Mazda5_8FA7-EA-15G_Edition2 Page253
Friday, July 10 2015 5:27 PM
Black plate (253,1)
Interior Comfort
Audio System
Fast-forward/Reverse
Press and hold the fast-forward button
( ) to advance through a track at high
speed.
Press and hold the reverse button ( ) to
reverse through a track at high speed.
Track search
Press the track up button ( ) once to
skip forward to the beginning of the next
track.
Press the track down button ( ) within a
few seconds after playback begins to track
down.
Press the track down button ( ) after a
few seconds have elapsed to start
playback from the beginning of the track.
The time required to track down/start
playback from the beginning of a track
varies depending on iPod software
version.
Category search
Press the category down button ( ) to
select the previous category and press the
category up button ( ) to select the next
category.
NOTE
The types of categories include Playlist, Artist,
Album, Song, Podcast, Genre, Composer, and
Audio book.
List search
Press the list down button ( ) to select
the previous list and press the list up
button ( ) to select the next list.
NOTE
When the selected category is Song or Audio
book, there is no list.
Music Scan
This function scans the titles in a list
currently being played and plays ten
seconds of each song to aid you in finding
a song you want to listen to.
) during
Press the scan button (
playback to start the scan play operation
(the track number will flash). Press the
) again to cancel scan
scan button (
playback.
NOTE
If the unit is left in scan, normal playback will
resume where scan was selected.
Repeat playback
) during
1. Press the repeat button (
playback to play the current track
repeatedly. “RPT” is displayed.
2. Press the button again to cancel the
repeat playback.
Random playback
Tracks are randomly selected and played.
(Song random)
) during
1. Press the random button (
playback to play the tracks in the list
randomly. “SONG RDM” is displayed.
2. To cancel the random playback, press
the button again after 3 seconds.
(Album random)
) during
1. Press the random button (
playback, and then press the button
again within 3 seconds to play the
tracks on the iPod randomly.
“ALBUM RDM” is displayed.
2. Press the button again to cancel the
random playback.
6-57
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page254
Friday, July 10 2015 5:27 PM
Black plate (254,1)
Interior Comfort
Audio System
NOTE
The track number being played randomly is in
the order of the iPod shuffle table.
Switching the display
For files with a file name and other
information that have been input, the
display switches between display of the
file name and other information each time
) is pressed during
the text button (
playback.
File number/Elapsed time
File number
Category (Playlist title/Genre
title/Composer title/Podcast title)
Artist name
Album name
To display the rest of the characters of a
).
long title, press the scroll button (
The display scrolls the next 12 characters.
) again after
Press the scroll button (
the last 12 characters have been displayed
to return to the beginning of the title.
NOTE
The number of characters which can be
displayed is restricted.
Error Messages
If the message “CHECK iPod” is
displayed, it indicates that there is a
malfunction in the iPod. Verify that the
content recorded in the iPod has playable
files and connect correctly. If the message
reappears, have the unit checked by an
Authorized Mazda Dealer.
qError Indications
If you see an error indication on the
display, find the cause in the chart. If you
cannot clear the error indication, take the
vehicle to an Authorized Mazda Dealer.
Indication
Song name
CHECK USB
NOTE
l
l
The information (artist name, music name)
is displayed only when the iPod has
information which can be displayed.
This unit cannot display some characters.
Characters which cannot be displayed are
indicated by an asterisk ( ).
Display scroll
Only 12 characters can be displayed at
one time.
6-58
Form No.8FA7-EA-15G
CHECK iPod
Cause
Solution
Verify that the content
recorded in the USB
device has
MP3/WMA/AAC files
USB device
and re-connect correctly.
malfunction
If the error indication
continues to display,
consult an Authorized
Mazda Dealer.
Verify that the content
recorded in the iPod has
playable files and
iPod
re-connect correctly.
malfunction If the error indication
continues to display,
consult an Authorized
Mazda Dealer.
Mazda5_8FA7-EA-15G_Edition2 Page255
Friday, July 10 2015 5:27 PM
Black plate (255,1)
Interior Comfort
Audio System
Safety Certification
This CD player is made and tested to meet exacting safety standards. It meets FCC
requirements and complies with safety performance standards of the U.S. Department of
Health and Human Services.
CAUTION
Ø This CD player should not be adjusted or repaired by anyone except qualified
service personnel.
If servicing is required, contact an Authorized Mazda Dealer.
Ø Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous laser exposure. Never operate the CD
player with the top case of the unit removed.
Ø Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
NOTE
For CD player section:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
6-59
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page256
Friday, July 10 2015 5:27 PM
Black plate (256,1)
Interior Comfort
Bluetooth® Audio
Bluetooth® Audio í
qWhat is Bluetooth® Audio?
Bluetooth® audio outline
By programming portable audio devices
equipped with the Bluetooth®
communication function to the vehicle's
Bluetooth® unit, you can listen to music
or audio recorded on these audio devices
from the vehicle's speakers. Bluetooth®
audio devices do not need to be plugged
into the auxiliary jack.
After programming, operate the audio
system's control panel to play/stop the
music or audio.
CAUTION
Ø Always program audio devices to
the Bluetooth® audio system
while the vehicle is stopped.
Ø Because only specified Bluetooth®
audio devices can be used, consult
an Authorized Mazda Dealer when
purchasing or changing devices.
Bluetooth® audio devices which
correspond to specified
Bluetooth® versions and profiles
can be Bluetooth®-connected to
the vehicle's Bluetooth® unit.
However, even among these
devices are ones which cannot be
Bluetooth®-connected or have
limited functionality. Each device
to be used with the vehicle's
Bluetooth® unit needs to be
checked individually for
compatibility. Consult an
Authorized Mazda Dealer
concerning device compatibility.
Ø U.S.A.
Phone: 800-430-0153
Web: www.MazdaUSA.com/
bluetooth
Ø Canada
Phone: 800-430-0153
Web: www.mazdahandsfree.ca
Ø Mexico
Center of Attention to Client
(CAC)
Phone: 01-800-01-MAZDA
Web:
www.mazdamexico.com.mx
Applicable Bluetooth® specification
Ver. 2.0 or higher
6-60
í
Some models.
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page257
Friday, July 10 2015 5:27 PM
Black plate (257,1)
Interior Comfort
Bluetooth® Audio
Audio profile
l A2DP (Advanced Audio Distribution
Profile) Ver. 1.0
l AVRCP (Audio/Video Remote Control
Profile) Ver. 1.0/1.3
A2DP is a profile which transmits only
audio to the Bluetooth® unit. If your
Bluetooth® audio device corresponds only
to A2DP, but not AVRCP, you cannot
operate it using the control panel of the
vehicle's audio system. In this case, the
Bluetooth® audio device can be operated
by controlling the device itself, the same
as when a portable audio system without
the Bluetooth® communication function is
connected to the AUX terminal.
Function
Playback
Pause
File (Track)
up/down
Reverse
Fast-forward
Text display
A2DP
No
No
A2DP·AVRCP
Ver. 1.0
Ver. 1.3
Yes
Yes
Yes
Yes
No
Yes
Yes
No
No
No
No
No
No
Yes
Yes
Yes
NOTE
l
l
l
l
l
The system may not operate normally
depending on the Bluetooth® audio device.
To make sure that your Bluetooth® audio
device is Ver. 1.0 or 1.3, refer to the
Owner's Manual for the Bluetooth® audio
device.
It may not be possible to play a Bluetooth®
audio device if it is placed anywhere
transmission is compromised, such as
inside a metal container or the trunk. Move
the Bluetooth® audio device to a location
where transmission is possible.
Battery consumption of Bluetooth® audio
devices is higher while Bluetooth®connected.
If a non-Bluetooth® device is to be used, a
commercially-available Bluetooth® adapter
is required. When playing an audio device
with a Bluetooth® adapter installed,
programming of the audio device may not
be possible or audio may not be heard from
the vehicle speakers if the connection of the
adapter and the device is poor. If this
happens, check if the Bluetooth® adapter is
properly connected.
Yes: Available
No: Not available
6-61
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page258
Friday, July 10 2015 5:27 PM
Black plate (258,1)
Interior Comfort
Bluetooth® Audio
qBluetooth® Audio Preparation
®
Bluetooth audio device set-up
Display
PAIR DEVICE
®
Bluetooth audio programming, changes,
deletions, and display of programmed
device information can be performed.
1. The mode changes as follows each
time the audio control dial is pressed.
Select “BT SETUP”.
LINK CHANGE
PAIR DELETE
DEVICE INFO
Mode
Function
Bluetooth® audio
Pairing
program mode device programming
Changing link
Link change
to Bluetooth®
mode
audio device
Deleting link
Pairing
to Bluetooth®
deletion mode
audio device
Displaying
Device
vehicle's
information
Bluetooth®
display mode unit
information
3. Press the audio control dial to
determine the mode.
Bluetooth® audio device programming
* Depending on the mode selected, the
indication changes.
2.Turn the audio control dial and select a
desired mode.
6-62
Form No.8FA7-EA-15G
Any Bluetooth® audio device must be
programmed to the vehicle's Bluetooth®
unit before it can be listened to over the
vehicle's speakers.
A maximum of seven devices including
Bluetooth® audio devices and hands-free
mobile phones can be programmed to one
vehicle.
Mazda5_8FA7-EA-15G_Edition2 Page259
Friday, July 10 2015 5:27 PM
Black plate (259,1)
Interior Comfort
Bluetooth® Audio
NOTE
l
l
l
l
Always perform Bluetooth® audio device
programming while the vehicle is stopped.
If a Bluetooth® device has already been
programmed to the vehicle as a hands-free
mobile phone, it does not need to be
programmed again when using the device
as a Bluetooth® audio device. Conversely, it
does not need to be programmed again as a
hands-free mobile phone if it has already
been programmed as a Bluetooth® audio
device.
Look around to be sure other likely
Bluetooth® audio devices are not in range
when you start to program. If in doubt,
move your car to another location. The
transmission range of a Bluetooth® audio
device is about 10 m (32 ft). Therefore, if
there is another Bluetooth® audio device
within a 10 m (32 ft) radius of the vehicle,
the device may be identified and
programmed instead.
Device registration can also be done using
voice recognition (page 6-74).
Concerning the operation of a Bluetooth®
audio device itself, refer to its instruction
manual.
Some Bluetooth® audio devices have PIN
codes (four digits). Refer to the audio
device's instruction manual because the
programming procedure differs depending
on whether it has a PIN code or not.
®
Programming a Bluetooth audio
device which has a four-digit PIN code
1. Using the audio control dial, select the
pairing program mode
“PAIR DEVICE” in the “BT SETUP”
mode. (Refer to “Bluetooth® audio
device set-up” for details.)
2. Press the audio control dial to
determine the mode.
After “ENTER PIN” is displayed on
the information display for three
seconds, “PIN 0000” is displayed and
the PIN code can be input.
3. Input the PIN code of your Bluetooth®
audio device by pressing channel
preset buttons 1 to 4 while “PIN 0000”
is displayed.
Press channel preset button 1 to input
the first digit, 2 for the second, 3 for
the third, and 4 for the forth. For
example, if the PIN code were “4213”,
press channel preset button 1 four
times (1, 2, 3, 4), button 2 twice (1, 2),
button 3 once (1), and button 4 three
times (1, 2, 3). If the “PIN 0000”
display disappears before finishing the
PIN code input, repeat the procedure
from Step 1.
NOTE
Some devices accept only a particular pairing
code (Usually, “0000” or “1234”).
If pairing cannot be completed, refer to the
owner's manual of your mobile device, and try
those numbers if necessary.
4. Press the audio control dial while the
input PIN code is displayed.
“PAIRING” flashes on the display.
5. Operate the Bluetooth® audio device
and set it to the program mode while
“PAIRING” is flashing.
6. When the programming is completed,
“ ” and “PAIR SUCCESS” are
displayed after about 10-30 seconds,
after which “PAIR SUCCESS”
continues to be displayed for three
seconds, and then the unit returns to the
normal display.
6-63
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page260
Friday, July 10 2015 5:27 PM
Black plate (260,1)
Interior Comfort
Bluetooth® Audio
NOTE
l
l
l
l
Some Bluetooth® audio devices need a
certain amount of time before the “ ”
symbol is displayed.
If the programming failed, “Err” flashes
for three seconds then it returns to
“PAIR DEVICE”.
Programming cannot be performed while
the vehicle is moving. If you attempt to
perform programming while the vehicle is
moving, “PAIR DISABLE” is displayed and
it returns to “PAIR DEVICE”.
If seven Bluetooth® audio devices have
already been programmed to the vehicle,
programming cannot be performed and
“MEMORY FULL” is displayed. Delete
one programmed device to program
another one.
6. When the programming is completed,
“ ” and “PAIR SUCCESS” are
displayed after about 10-30 seconds,
after which “PAIR SUCCESS”
continues to be displayed for three
seconds, and then the unit returns to the
normal display.
NOTE
l
l
l
l
Programming a Bluetooth® audio
device which does not have a four-digit
PIN code
1. Using the audio control dial, select the
pairing program mode
“PAIR DEVICE” in the “BT SETUP”
mode. (Refer to “Bluetooth® audio set
up” for details.)
2. Press the audio control dial to
determine the mode.
After “ENTER PIN” is displayed on
the information display for three
seconds, “PIN 0000” is displayed and
the PIN code can be input.
3. Press the audio control dial while
“PIN 0000” is displayed.
“PAIRING” flashes on the display.
4. Operate the Bluetooth® audio device
and set it to the program mode while
“PAIRING” is flashing.
5. As the Bluetooth® audio device
requires a PIN code, input “0000”.
6-64
Form No.8FA7-EA-15G
l
If pairing cannot be completed, try “1234”
instead. Refer to the owner's manual of
your mobile device for the right PIN code.
Some Bluetooth® audio devices need a
certain amount of time before the “ ”
symbol is displayed.
If the programming failed, “Err” flashes
for three seconds then it returns to
“PAIR DEVICE”.
Programming cannot be performed while
the vehicle is moving. If you attempt to
perform programming while the vehicle is
moving, “PAIR DISABLE” is displayed and
it returns to “PAIR DEVICE”.
If seven Bluetooth® audio devices have
already been programmed to the vehicle,
programming cannot be performed and
“MEMORY FULL” is displayed. Delete
one programmed device to program
another one.
Mazda5_8FA7-EA-15G_Edition2 Page261
Friday, July 10 2015 5:27 PM
Black plate (261,1)
Interior Comfort
Bluetooth® Audio
Changing the link to a Bluetooth®
audio device
If several devices have been programmed,
the Bluetooth® unit links the device last
programmed. If you would like to link a
different programmed device, it is
necessary to change the link. The order of
device priority after the link has been
changed is maintained even when the
ignition is switched off.
4. Turn the audio control dial to select the
name of the device you would like to
link.
Device name 1
Device name 2
Device name 3
1. Using the audio control dial, select the
link change mode “LINK CHANGE”
in the “BT SETUP” mode. (Refer to
“Bluetooth® audio device set-up” for
details.)
Device name 4
Device name 5
2. Press the audio control dial to
determine the mode.
3. The name of the currently linked
Bluetooth® audio device is displayed.
If no Bluetooth® audio device is
currently linked, the name of the first
device among the programmed devices
is displayed.
Device name 6
Device name 7
5. Press the audio control dial to select the
device you would like to link.
The “ ” symbol disappears, and
“PAIRING” flashes in the display.
NOTE
When “GO BACK” is selected and the audio
control dial is pressed, the display returns to
“LINK CHANGE”.
6. If the link to the desired device is
successful, the “ ” symbol is
displayed again, together with
“LINK CHANGED”.
“LINK CHANGED” is displayed for
three seconds, then it returns to the
normal display.
6-65
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page262
Friday, July 10 2015 5:27 PM
Black plate (262,1)
Interior Comfort
Bluetooth® Audio
NOTE
l
l
l
l
Some Bluetooth® audio devices need a
certain amount of time before the “ ”
symbol is displayed.
If a hands-free type mobile phone has been
the most recently programmed device, the
Bluetooth® unit links this device. If you
would like to use a Bluetooth® audio type
device which has been previously
programmed to the Bluetooth® unit, the link
must be changed to this device.
If an error occurs while trying to link a
device, “Err” flashes in the display for
three seconds, and the display returns to
“LINK CHANGE”. If this occurs, check the
programming status of the Bluetooth®
audio device and the location of the device
in the vehicle (not in the trunk or a metaltype box), and then try the link operation
again.
Device selection can also be done using
voice recognition (page 6-85).
How to confirm the device currently
linked
Switch to the link-change mode. (Refer to
“Changing the link to a Bluetooth® audio
device”)
The device name displayed first is the
device which is currently linked.
Deleting the link to a Bluetooth® audio
device
1. Using the audio control dial, select the
pairing delete mode “PAIR DELETE”
in the “BT SETUP” mode. (Refer to
“Bluetooth® audio device set-up” for
details.)
2. Press the audio control dial to
determine the mode.
3. The name of the first device among the
programmed devices is displayed.
6-66
Form No.8FA7-EA-15G
4. Rotate the audio control dial and select
the name of the programmed device
you would like to delete.
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7
NOTE
Only the names of programmed devices can be
displayed. If only one device is programmed,
only the name for this device is displayed.
5. If a selection other than “GO BACK”
is made and the audio control dial is
pressed, “SURE ? NO” is displayed.
6. Rotate the audio control dial clockwise
and switch the display to “SURE ?
YES”.
NOTE
The display changes as follows depending on
whether the audio control dial is rotated
clockwise or counterclockwise.
-Clockwise: “SURE ? YES” displayed
-Counterclockwise: “SURE ? NO” displayed
Mazda5_8FA7-EA-15G_Edition2 Page263
Friday, July 10 2015 5:27 PM
Black plate (263,1)
Interior Comfort
Bluetooth® Audio
7. Press the audio control dial to delete
the selected device.
NOTE
4. Rotate the audio control dial to select
the information for the Bluetooth® unit
which you would like to view.
Select “GO BACK” and press the audio
control dial to return to the “PAIR DELETE”
display.
Device name
8. “PAIR DELETED” is displayed for
three seconds after the deletion is
completed, and then it returns to the
normal display.
BT address
NOTE
If an error occurs while trying to delete the
programmed device, “Err” flashes in the
display for three seconds and the display
returns to “LINK DELETE”.
Bluetooth® audio device information
display
1. Using the audio control dial, select the
pair device information display mode
“DEVICE INFO” in the “BT SETUP”
mode. (Refer to “Bluetooth® audio
device set-up” for details.)
2. Press the audio control dial to
determine the mode.
3. The name of the Bluetooth® unit
device is displayed.
NOTE
When “GO BACK” is selected and the audio
control dial is pressed, the display returns to
“DEVICE INFO”.
qHow to Use the Bluetooth®
Audio System
Switching to Bluetooth® audio mode
To listen to music or voice audio recorded
to a Bluetooth® audio device, switch to
the Bluetooth® audio mode to operate the
audio device using the audio system
control panel.
Any Bluetooth® audio device must be
programmed to the vehicle's Bluetooth®
unit before it can be used. (Refer to
“Bluetooth® audio device programming”)
1. Switch the ignition to ACC or ON.
2. Turn on the Bluetooth® audio device's
power.
Make sure that the “ ” symbol is
displayed in the information display.
The symbol is not displayed if an
unprogrammed Bluetooth® audio
device is being used or the vehicle's
Bluetooth® unit has a malfunction.
6-67
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page264
Friday, July 10 2015 5:27 PM
Black plate (264,1)
Interior Comfort
Bluetooth® Audio
NOTE
Some Bluetooth® audio devices need a certain
amount of time before the “ ” symbol is
displayed.
3. Press the source change button ( ) to
switch to the Bluetooth® audio mode
and start playback.
If the current device version is lower
than AVRCP Ver. 1.3:
“BT Audio” is displayed.
If the current device is AVRCP Ver.
1.3:
The playback time is displayed.
NOTE
l
l
l
If the Bluetooth® audio device does not
begin playback, press the Play/Pause
button (
).
If the mode is switched from Bluetooth®
audio mode to another mode (radio mode),
audio playback from the Bluetooth® audio
device stops.
If a call is received on a hands-free mobile
phone during playback from the Bluetooth®
audio device, the playback is stopped.
Playback from the Bluetooth® audio device
resumes after the call ends.
Selecting a file (track)
Short-press the track down button ( ) or
turn the file dial counterclockwise: Selects
the beginning of the current file (track).
Short-press the track up button ( ) or
turn the file dial clockwise: Selects the
next file (track).
Fast-forward/Reverse (only AVRCP
Ver. 1.3)
Fast-forward
Press and hold the track up button (
).
Reverse
Press and hold the track down button
( ).
Switching the display (only AVRCP
Ver. 1.3)
For files with a song title and other
information that have been input, the
display switches between display of the
song title and other information each time
) is pressed during
the text button (
playback.
Playback
File number/ Playback time
1. To listen to a Bluetooth® audio device
over the vehicle's speaker system,
switch the mode to Bluetooth® audio
mode. (Refer to “Switching to
Bluetooth® audio mode”)
Album title
Song title
Artist name
2. To stop playback, press the Play/Pause
button ( ).
3. Press the button again to resume
playback.
NOTE
l
l
6-68
Form No.8FA7-EA-15G
If title information is not available,
“NO TITLE” is displayed.
This unit cannot display some characters.
Characters which cannot be displayed are
indicated by an asterisk ( ).
Mazda5_8FA7-EA-15G_Edition2 Page265
Friday, July 10 2015 5:27 PM
Black plate (265,1)
Interior Comfort
Bluetooth® Audio
Display scroll
Only 12 characters can be displayed at
one time. To display the rest of the
characters of a long title, short-press the
). The display scrolls
scroll button (
the next 12 characters. Short-press the
) again after the last
scroll button (
12 characters have been displayed to
return to the beginning of the title.
6-69
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page266
Friday, July 10 2015 5:27 PM
Black plate (266,1)
Interior Comfort
Bluetooth® Hands-Free
Bluetooth® Hands-Free í
qWhat is Bluetooth® Hands-Free?
Bluetooth® Hands-Free Outline
By connecting a Bluetooth® equipped
device (Mobile phone) to the hands-free
unit equipped on the vehicle, making and
receiving calls is possible using the talk
button, pick-up button and hang-up button
located on the steering wheel, and saying
the voice commands.
WARNING
Perform phonebook registration related
operations while the vehicle is parked:
Performing phonebook registration
while driving the vehicle could be a
distraction to your driving and result
in an accident. In addition, a mistake
in performing the phonebook
operation could result in the loss of
important data.
Bluetooth® equipped device (Mobile
phone)
A Bluetooth® equipped device (Mobile
phone) communicates with the hands-free
unit equipped on the vehicle using radio
transmission (Bluetooth®).
For example, if the device (Mobile phone)
is placed in a coat pocket, the phone calls
can be made through your mobile service
without taking out and handling the
device (Mobile phone).
6-70
í
Some models.
Form No.8FA7-EA-15G
CAUTION
The types of devices (Mobile phone)
which can be connected to the
hands-free unit are limited.
Therefore, before purchasing or
changing your device (Mobile phone)
model, consult Mazda Bluetooth®
Hands-Free Customer Service or visit
www.MazdaUSA.com/bluetooth for a
complete list of compatible phones.
Devices (Mobile phone) which can be
connected to the hands-free system
need to be compliant with
Bluetooth® specifications and the
appropriate profile. However, even
among these Bluetooth® devices
(Mobile phone) are some which will
not connect with your Mazda or will
have limited function. Therefore,
consult Mazda Bluetooth® HandsFree Customer Service for
information regarding device (Mobile
phone) compatibility:
Ø U.S.A.
Phone: 800-430-0153
Web: www.MazdaUSA.com/
bluetooth
Ø Canada
Phone: 800-430-0153
Web: www.mazdahandsfree.ca
Ø Mexico
Center of Attention to Client (CAC)
Phone: 01-800-01-MAZDA
Web: www.mazdamexico.com.mx
Applicable Bluetooth® specification
Ver. 2.0 or higher
Response profile
l HFP (Hands Free Profile) Ver. 1.5
l DUN (Dial-up Networking Profile)
Ver. 1.1
l PBAP (Phone Book Access Profile)
Ver. 1.0
Mazda5_8FA7-EA-15G_Edition2 Page267
Friday, July 10 2015 5:27 PM
Black plate (267,1)
Interior Comfort
Bluetooth® Hands-Free
l
l
A2DP (Advanced Audio Distribution
Profile) Ver. 1.0
OPP (Object Push Profile) Ver. 1.1
NOTE
l
l
l
The Bluetooth® Hands-Free system is
operable several seconds after the ignition
is switched to ACC or ON (requires less
than 15 seconds).
If the ignition is switched off during a
hands-free call, the line is transferred to the
device (Mobile phone) automatically.
If the device (Mobile phone) is in a location
where radio reception is difficult such as a
metal container or in the trunk, the call may
not be connected using Bluetooth®. If
communication is not possible, change the
location of the device (Mobile phone).
qComponent Parts
Bluetooth® Hands-Free consists of the
following items:
l Talk button
l Pick-up button
l Hang-up button
l Information display
l Microphone
l Audio unit
Talk button, Pick-Up button and HangUp button
Basic functions of Bluetooth® Hands-Free
can be used for such things as making
calls or hanging up using the talk button,
pick-up button and hang-up button on the
steering wheel.
Pick-up button
Hang-up
button
Talk button
Talk button operations
A short press or a long press of the talk
button is used to operate the system as
follows:
l Short press (Press the button less than
0.7 sec.)
l Long press (Press the button 0.7 sec. or
more.)
Information display
When available, the information display
shows telephone numbers, Bluetooth®
Hands-Free messages, and operation
status.
Bluetooth phone connected
NOTE
The talk button, pick-up button, and hang-up
button are operable with the audio unit turned
off.
6-71
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page268
Friday, July 10 2015 5:27 PM
Black plate (268,1)
Interior Comfort
Bluetooth® Hands-Free
Microphone
The microphone is used for speaking
voice commands or exchanging
conversation.
l
Microphone
Close the windows and/or the
moonroof to reduce loud noises from
outside the vehicle, or turn down the
airflow of the climate control system
while Bluetooth® Hands-Free is being
used. Voice recognition may not
function correctly or voice quality may
deteriorate under the following
conditions.
A passenger is speaking.
Driving with the window and/or the
moonroof open.
Driving on bumpy roads.
Noise outside of the vehicle is loud.
(Construction sites, inside tunnels,
excess oncoming traffic, or heavy
rain.)
Operation noise from turn signals,
wipers, or the horn is heard.
A/C airflow is strong or wind is
blowing on the microphone.
There is noise coming from cargo
loaded in the vehicle.
Voice commands may not be
recognized depending on the voice. If
the voice commands are not recognized
correctly, repeat the commands in a
louder voice, at a natural pace, as if
speaking to another person.
Dialects or different wording other than
hands-free prompts cannot be
recognized by voice recognition. Speak
in the wording specified by the voice
commands.
l
l
l
l
Audio unit
l
The audio unit is used for adjusting the
volume.
l
qVoice
To prevent the deterioration in voice
recognition rate and voice quality, the
following points must be observed:
l It is not necessary to face the
microphone or approach it. Speak the
voice commands while maintaining a
safe driving position.
l
l
l
NOTE
If the voice recognition performance is not
satisfactory, refer to “Voice Recognition
Learning Function (Speaker Enrollment)”
(page 6-89).
Please be aware that the voice recognition
may still make an error despite following
the above points.
6-72
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page269
Friday, July 10 2015 5:27 PM
Black plate (269,1)
Interior Comfort
Bluetooth® Hands-Free
qFunction Restrictions While
Using Bluetooth® Hands-Free
Some functions are limited while
Bluetooth® Hands-Free is being used.
They include:
l Beep sound and voice guidance related
to the audio unit are not heard.
l Beep sound related to the A/C
operation is not heard.
qHow to Use This Section
Descriptions in the text are as follows:
Say: Voice commands to be spoken by
you.
Prompt: Voice guidance output from the
speaker.
NOTE
Say voice commands after the beep sound
[Beep] is heard.
Tutorial
The tutorial explains how to use
Bluetooth® Hands-Free.
To activate the tutorial, do the following:
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Tutorial”
3. Follow the prompts to receive the
appropriate voice guidance
instructions.
qUseful Commands at Anytime,
Convenient Operations
Help function use
The help function informs the user of all
the available voice commands under the
current conditions.
1. Press the talk button with a short press.
Example)
Say: [Beep] “Dial”
Prompt: “Number, please”
Say: [Beep] “XXXXXXXXXXX (Ex.
“555-1234”) (Telephone number)”
2. Say: [Beep] “Help”
Bluetooth® Hands-Free Activation
Method
Cancel
Press the pick-up button or talk button
with a short press.
The hands-free system is activated.
Functions of the hands-free telephone,
such as making and receiving calls, can be
used after the activation. (For details on
the telephone functions, refer to “Basic
Bluetooth® Hands-Free Operation” or
“Convenient Use of the Hands-Free
System”.)
3. Follow the prompts to receive the
appropriate voice guidance
instructions.
The Bluetooth® Hands-Free system
transitions to standby status if the
following operation is performed while
the system is activating.
Press the hang-up button, or the talk
button with a long press.
Returning to previous operation
This command is for returning to the
previous operation while in the voice
recognition mode.
Say: [Beep] “Go Back”
6-73
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page270
Friday, July 10 2015 5:27 PM
Black plate (270,1)
Interior Comfort
Bluetooth® Hands-Free
Voice guidance interrupt operation
Voice guidance can be skipped by
pressing the talk button with a short press
while it is being heard. A new voice input
command can then be spoken by the user.
Voice recognition mode cancel
If you want to cancel the voice
recognition mode during a call, the voice
recognition mode can be canceled without
having to end the call.
Press the talk button with a long press.
Basic Bluetooth® HandsFree Operation
qBluetooth® Hands-Free Preparation
Language setting
The available languages are English,
Spanish, and Canadian French. If the
language setting is changed, all of the
voice guidance and voice input
commands are done in the selected
language.
NOTE
l
l
If the language setting is changed, device
registration is maintained.
Phonebook records are not cleared, but
each language has a separate phonebook.
Therefore, entries created in one language
will need to be re-entered in the phonebook
of the new language.
Do these steps before you start driving.
These less used functions are too
distracting to undertake while driving until
you are fully familiar with the system.
Method 1
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Setup”
3. Prompt: “Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.”
4. Say: [Beep] “Language”
5. Prompt: “Select a language: English,
French, or Spanish.”
6. Say: [Beep] “French” (Speak the
desired language: “English”, “French”
or “Spanish”)
6-74
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page271
Friday, July 10 2015 5:27 PM
Black plate (271,1)
Interior Comfort
Bluetooth® Hands-Free
NOTE
Other language settings can also be made
while in the current setting by saying the name
of the language in the native pronunciation.
7. Prompt: “French (Desired language)
selected. Is this correct?”
8. Say: [Beep] “Yes”
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Setup”
3. Prompt: “Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.”
9. Prompt: “Please wait. Switching to
French phonebook. French selected.”
(Spoken in the newly selected
language).
4. Say: [Beep] “Pairing options”
Method 2
6. Say: [Beep] “Set pairing code”
1. Press the pick-up button or talk button
with a short press.
7. Prompt: “Your current pairing code is
XXXX. Do you want to change it to a
different pairing code?”
2. Say: [Beep] “French” (Say the desired
language: “English”, “French”, or
“Spanish”.) (Change the desired
language by saying the language
name.)
5. Prompt: “Select one of the following:
Pair, Edit, Delete, List, or Set Pairing
Code.”
8. Say: [Beep] “Yes”
9. Prompt: “Please say a 4-digit pairing
code.”
NOTE
10. Say: [Beep] “YYYY”
Other language settings can also be made
while in the current setting by saying the name
of the language in the native pronunciation.
11. Prompt: “YYYY is this correct?”
3. Prompt: “Would you like to change
the language to French (Desired
language)?”
13. If “Yes”, go to Step 14. If “No”, the
procedure returns to Step 9.
4. Say: [Beep] “Yes”
5. Prompt: “Please wait. Switching to
French phonebook. French selected.”
(Spoken in the newly selected
language).
Pairing code setting
The 4-digit pairing code setting for
registration of your cell phone (pairing)
can be set beforehand.
12. Say: [Beep] “Yes” or “No”
14. Prompt: “Your new pairing code is
YYYY. Use this pairing code when
pairing devices to the Hands free
system. Do you want to pair a device
now?”
15. Say: [Beep] “Yes” or “No”
16. If “Yes”, the system switches to the
device registration mode. If “No”, the
system returns to standby status.
NOTE
The initial setting value is “0000”.
6-75
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page272
Friday, July 10 2015 5:27 PM
Black plate (272,1)
Interior Comfort
Bluetooth® Hands-Free
Device programming (Pairing)
To use Bluetooth® Hands-Free, the device
equipped with Bluetooth® has to be
programmed to the hands-free unit using
the following procedure.
A maximum of seven devices including
hands-free mobile phones and Bluetooth®
audio devices can be programmed to one
vehicle.
NOTE
l
l
l
A device can be programmed only when the
vehicle is parked. If the vehicle starts to
move, the pairing procedure will end.
Programming is dangerous while driving pair up your device before you start
driving. Park the car in a safe place before
programming.
If a Bluetooth® device has already been
programmed to the vehicle as a Bluetooth®
audio device, it does not need to be
programmed again when using the device
as a hands-free mobile phone. Conversely,
it does not need to be programmed again as
a Bluetooth® audio device if it has already
been programmed as a hands-free mobile
phone.
Since the communication range of a
Bluetooth® equipped device is about 10
meters (32 ft), if a device is placed within a
10-meter (32 ft) radius of the vehicle, it may
be detected/programmed unintentionally
while another device is being programmed.
1. Activate the Bluetooth® application of
the device.
NOTE
For the operation of the device, refer to its
instruction manual.
2. Press the pick-up button or talk button
with a short press.
3. Say: [Beep] “Setup”
6-76
Form No.8FA7-EA-15G
4. Prompt: “Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.”
5. Say: [Beep] “Pairing options”
6. Prompt: “Select one of the following:
Pair, Edit, Delete, List, or Set Pairing
Code.”
7. Say: [Beep] “Pair”
8. Prompt: “Start the pairing process on
your Bluetooth® device. Your pairing
code is 0000 (XXXX). Input this code
on your Bluetooth® device when
prompted on the device. See device
manual for instructions.”
9. Using the device, perform a search for
the Bluetooth® device (Peripheral
device).
NOTE
For the operation of the device, refer to its
instruction manual.
10. Select “Mazda” from the device list
searched by the device.
11. Input the 4-digit pairing code to the
device.
12. Prompt: “Please say the name of the
device after the beep.”
13. Say: [Beep] “XXXX - - -” (Speak a
“device tag”, an arbitrary name for
the device.)
Example: “Stan's device.”
NOTE
Speak a programmed “device tag” within 10
seconds.
If more than two devices are to be
programmed, they cannot be programmed with
the same or similar “device tag”.
Mazda5_8FA7-EA-15G_Edition2 Page273
Friday, July 10 2015 5:27 PM
Black plate (273,1)
Interior Comfort
Bluetooth® Hands-Free
14. Prompt: “XXXXXX - - - (Ex.
“Stan's device”) (Device tag). Is this
correct?”
15. Say: [Beep] “Yes”
16. Prompt: “Pairing complete”
After a device is registered, the system
automatically identifies the device. By
activating Bluetooth® Hands-Free again,
or by activating Bluetooth® Hands-Free
first after switching the ignition from OFF
to ACC, the system reads out a voice
guidance, “XXXXXX - - - (Ex. “Stan's
device”) (Device tag) is connected”.
NOTE
l
l
Device registration can also be done by
operating the audio unit.
Refer to Bluetooth® Audio Preparation on
page 6-62.
Depending on the device, the registration
status may be lost after a certain period of
time. If this occurs, repeat the entire
process from Step 1.
qMaking a Call Using a Telephone
Number
5. Prompt: “XXXXXXXXXXX.
(Telephone number) After the beep,
continue to add numbers, or say GoBack to re-enter the last entered
numbers, or press the Pick-Up button
to execute dialing.”
6. (Dialing)
Press the pick-up button or say “Dial”,
then go to Step 7.
(Adding/inputting telephone
number)
Say, “XXXX” (desired telephone
number), then go to Step 5.
(Telephone number correction)
Say, “Go Back”. The prompt replies,
“Go Back. The last entered numbers
have been removed.”. Then go back to
Step 3.
7. Prompt: “Dialing”
NOTE
The “Dial” command and a telephone number
can be combined.
Ex. In Step 2, say, “Dial 123-4567”, then,
Steps 3 and 4 can be skipped.
NOTE
Practice this while parked until you are
confident you can do it while driving in a nontaxing road situation. If you are not completely
comfortable, make all calls from a safe
parking position, and move out only when fully
under control and you can devote your eyes
and mind to driving.
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Dial”
3. Prompt: “Number, please”
4. Say: [Beep] “XXXXXXXXXXX
(Telephone number)”
6-77
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page274
Friday, July 10 2015 5:27 PM
Black plate (274,1)
Interior Comfort
Bluetooth® Hands-Free
qReceiving an Incoming Call
1. Prompt: “Incoming call, press the
pickup button to answer”.
2. To accept the call, press the pick-up
button.
To reject the call, press the hang-up
button.
Pick-up button
Hang-up
button
qHanging Up a Call
Press the hang-up button during the call.
A beep sound will confirm that call is
ended.
qVolume Adjustment
The power/volume dial of the audio unit
is used to adjust the volume. Turn the dial
to the right to increase volume, to the left
to decrease it.
6-78
Form No.8FA7-EA-15G
NOTE
l
l
The volume can also be adjusted using the
volume button on the steering wheel.
The music volume of the audio unit cannot
be adjusted while Bluetooth Hands-Free is
being used.
Mazda5_8FA7-EA-15G_Edition2 Page275
Friday, July 10 2015 5:27 PM
Black plate (275,1)
Interior Comfort
Bluetooth® Hands-Free
Convenient Use of the
Hands-Free System
qPhonebook Usage
Phonebook registration
Phone numbers can be registered to the
Bluetooth® Hands-Free phonebook.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Phonebook”
3. Prompt: “Select one of the following:
New entry, edit, list names, delete,
erase all or import contact.”
4. Say: [Beep] “New entry”
5. Prompt: “Name please.”
6. Say: [Beep] “XXXXX... (Ex. “Mary's
phone”)” (Say a voice tag for the name
registered.)
7. Prompt: “Adding XXXXX... (Ex.
“Mary's phone”) (Registered voice
tag). Is this correct?”
8. Say: [Beep] “Yes”
9. Prompt: “Home, Work, Mobile, or
Other?”
10. Say: [Beep] “Mobile” (Say “Home”,
“Work”, “Mobile”, or “Other”, for the
desired location to be registered.)
11. Prompt: “Mobile (Location to be
registered). Is this correct?”
12. Say: [Beep] “Yes”
13. Prompt: “Number, please.”
14. Say: [Beep] “XXXXXXXXXXX”
(Say the phone number to be
registered.)
15. Prompt: “XXXXXXXXXXX
(Phone number registration). After the
beep, continue to add numbers, or say
Go-Back to re-enter the last entered
numbers, or press the Pick-Up button
to save the number.”
16. (Registration)
Press the pick-up button or say
“Enter”, then go to Step 17.
(Adding/inputting telephone
number)
Say, “XXXX” (desired telephone
number), then go to Step 15.
(Telephone number correction)
Say, “Go Back”. The prompt replies,
“Go Back. The last entered numbers
have been removed.”. Then go back
to Step 13.
17. Prompt: “Number saved. Would you
like to add another number for this
entry?”
18. Say: [Beep] “Yes” or “No”.
19. If “Yes”, an additional phone number
registration can be made for the same
entry.
If “No”, the system returns to standby
status.
Import contact
Phonebook data from your device (Mobile
phone) can be sent and registered to your
Bluetooth® Hands-Free phonebook using
Bluetooth®.
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Phonebook”
6-79
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page276
Friday, July 10 2015 5:27 PM
Black plate (276,1)
Interior Comfort
Bluetooth® Hands-Free
3. Prompt: “Select one of the following:
New entry, edit, list names, delete,
erase all or import contact.”
4. Say: [Beep] “Import contact”
5. Prompt: “The hands free System is
ready to receive a contact from a
phone. Only a home, a work, and a
mobile number can be imported. This
process requires operation of a mobile
phone. Refer to the phone's manual for
more information.”
6. Device (Mobile phone) operation:
Select one entry from the phonebook
and send it using Bluetooth®.
7. Prompt: “X (Number of locations
which include data) numbers have been
imported. What name would you like
to use for these numbers?”
8. Say: [Beep] “XXXXX... (Ex. “Mary's
phone”)” (Say a voice tag for the name
registered.)
9. Prompt: “Adding XXXXX... (Ex.
“Mary's phone”) (Voice tag). Is this
correct?”
10. Say: [Beep] “Yes”
11. Prompt: “Number saved. Would you
like to import another contact?”
12. Say: [Beep] “Yes” or “No”
13. If “Yes”, the procedure proceeds to
Step 5.
If “No”, the system returns to standby
status.
Making calls using the phonebook
Telephone calls can be made by saying
the name of a person (voice tag) whose
phone number has been registered in
Bluetooth® Hands-Free in advance.
6-80
Form No.8FA7-EA-15G
For the phonebook setting method, refer
to (page 6-83).
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Call”
3. Prompt: “Name please.”
4. Say: [Beep] “XXXXX... (Ex. “John's
phone”)” (Say a voice tag registered in
the phonebook.)
5. Prompt: “Calling XXXXX... (Ex.
“John's phone”) XXXX (Ex. “at
home”). Is this correct?” (Voice tag and
phone number location registered in
phonebook).
6. Say: [Beep] “Yes”
7. Prompt: “Dialing”
NOTE
The “Call” command and the voice tag can be
combined.
Ex. In Step 2, say, “Call John's phone”, then,
Steps 3 and 4 can be skipped.
qRedialing Function
Redialing the number of the person
previously dialed using the phone is
possible.
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Redial”
3. Prompt: “Dialing”
Mazda5_8FA7-EA-15G_Edition2 Page277
Friday, July 10 2015 5:27 PM
Black plate (277,1)
Interior Comfort
Bluetooth® Hands-Free
qEmergency Calls
qTransferring a Call
A call can be made to the emergency
phone number (911: U.S.A/Canada, 066:
Mexico) using the voice input command.
It may not function properly in some areas
in Mexico.
Transferring a call from Hands-Free to
a device (Mobile phone)
1. Press the pick-up button or talk button
with a short press.
Communication between the hands-free
unit and a device (Mobile phone) is
canceled, and the line can be switched to a
standard call using a device (Mobile
phone).
2. Say: [Beep] “Emergency”
1. Press the talk button with a short press.
3. - USA/Canada vehicles - Prompt:
“Dialing “911”, is this correct?”
- Mexico vehicles - Prompt: “Dialing
“066”, is this correct?”
2. Say: [Beep] “Transfer call”
4. Say: [Beep] “Yes”
5. Prompt: “Dialing”
qRefusing an Incoming Call
For incoming call refusal, refer to
“Receiving an incoming call” (page 6-78).
3. Prompt: “Transferred call to phone”
Transferring a call from a device
(Mobile phone) to Hands-Free
Communication between devices (Mobile
phone) can be switched to Bluetooth®
Hands-Free.
1. Press the talk button with a short press.
2. Say: [Beep] “Transfer call”
qMute
3. Prompt: “Transferred call to Hands
Free system”
The microphone can be muted during a
call.
qMulti-Call Functions
1. Press the talk button with a short press.
2. Say: [Beep] “Mute”
Call waiting
A call can be interrupted to receive an
incoming call from a third party.
3. Prompt: “Microphone muted”
Call interrupt
Canceling mute
1. Press the talk button with a short press.
A call can be switched to a new incoming
call.
2. Say: [Beep] “Mute off”
Method 1
3. Prompt: “Microphone unmuted”
1. Press the pick-up button.
2. Prompt: “Swapping calls.”
Method 2
1. Press the talk button with a short press.
2. Say: [Beep] “Swap calls”
6-81
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page278
Friday, July 10 2015 5:27 PM
Black plate (278,1)
Interior Comfort
Bluetooth® Hands-Free
3. Prompt: “Swapping calls”
Method 1
6. (Dialing)
Press the pick-up button or say “Dial”,
then go to Step 7.
(Adding/inputting telephone
number)
Say, “XXXX” (desired telephone
number), then go to Step 5.
(Telephone number correction)
Say, “Go Back”. The prompt replies,
“Go Back. The last entered numbers
have been removed.”. Then go back to
Step 3.
1. Press the pick-up button.
7. Prompt: “Dialing”
2. Prompt: “Swapping calls.”
Making calls using the phonebook
Method 2
1. Press the talk button with a short press.
1. Press the talk button with a short press.
2. Say: [Beep] “Call”
2. Say: [Beep] “Swap calls”
3. Prompt: “Name please.”
3. Prompt: “Swapping calls”
4. Say: [Beep] “XXXXX... (Ex. “John's
phone”)” (Say a voice tag registered in
the phonebook.)
NOTE
l
l
To refuse an incoming call, press the hangup button.
After receiving a new incoming call, the
previous call is placed on hold.
Switching calls
Switching back to the previous call can
also be done.
Three-way call function
1. Press the talk button with a short press.
2. Say: [Beep] “Join calls”
3. Prompt: “Joining calls”
Making a call using a telephone
number
5. Prompt: “Calling XXXXX... (Ex.
“John's phone”) XXXX (Ex. “at
home”). Is this correct?” (Voice tag and
phone number location registered in
phonebook).
6. Say: [Beep] “Yes”
1. Press the talk button with a short press.
7. Prompt: “Dialing”
2. Say: [Beep] “Dial”
Redialing function
3. Prompt: “Number, please”
1. Press the talk button with a short press.
4. Say: [Beep] “XXXXXXXXXXX
(Telephone number)”
2. Say: [Beep] “Redial”
5. Prompt: “XXXXXXXXXXX.
(Telephone number) After the beep,
continue to add numbers, or say GoBack to re-enter the last entered
numbers, or press the Pick-Up button
to execute dialing.”
6-82
Form No.8FA7-EA-15G
3. Prompt: “Dialing”
Ending the current call
Press the hang-up button during the call.
Mazda5_8FA7-EA-15G_Edition2 Page279
Friday, July 10 2015 5:27 PM
Black plate (279,1)
Interior Comfort
Bluetooth® Hands-Free
qPhonebook Settings
Editing phonebook
The data registered to the Bluetooth®
Hands-Free phonebook can be edited.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Phonebook”
3. Prompt: “Select one of the following:
New entry, edit, list names, delete,
erase all or import contact.”
4. Say: [Beep] “Edit”
5. Prompt: “Please say the name of the
entry you would like to edit or say,
“List names”.”
6. Say: [Beep] “XXXXX... (Ex. “Mary's
phone”)” (Say the voice tag for the
registered name to be edited in the
phonebook.)
7. Prompt: “Home, Work, Mobile, or
Other?”
8. Say: [Beep] “Home” (Say the
registered location to be edited:
“Home”, “Work”, “Mobile”, or
“Other”).
9. Prompt: “XXXXX... (Ex. “Mary's
phone”) (Registered voice tag) XXXX
(Ex. “Home”) (Registered location). Is
this correct?”
10. Say: [Beep] “Yes”
11. Prompt: “The current number is
XXXXXXXXXXX (Ex. “555-1234”)
(Currently registered number). New
number, please.”
NOTE
If there was no previous phone number
registered to a location (Ex. “Work”), the
prompt will only read out “Number, please”.
12. Say: [Beep] “XXXXXXXXXXX
(Ex. “555-5678”)” (Say the new
phone number to be registered.)
13. Prompt: “XXXXXXXX (Telephone
number) After the beep, continue to
add numbers, or say Go-Back to reenter the last entered numbers, or
press the Pick-Up button to save the
number.”
14. (Number Change)
Press the pick-up button, then go to
Step 15.
(Adding/inputting telephone
number)
Say, “XXXX” (desired telephone
number), then go to Step 13.
(Telephone number correction)
Say, “Go Back”. The prompt replies,
“Go Back. The last entered numbers
have been removed. Number, please.”
. Then go back to Step 12.
15. Prompt: “Number changed.”
Phonebook data deletion
Erasing individual phonebook data
Individual data registered to the
Bluetooth® Hands-Free phonebook can be
cleared.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
6-83
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page280
Friday, July 10 2015 5:27 PM
Black plate (280,1)
Interior Comfort
Bluetooth® Hands-Free
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Phonebook”
3. Prompt: “Select one of the following:
New entry, edit, list names, delete,
erase all or import contact.”
4. Say: [Beep] “Delete”
5. Prompt: “Please say the name of the
entry you would like to delete or say,
“List names”.”
6. Say: [Beep] “XXXXX... (Ex. “John's
phone”)” (Say the registered voice tag
to be deleted from the phonebook.)
7. Prompt: “Deleting XXXXX... (Ex.
“John's phone”) (Registered voice tag)
Home (Registered location). Is this
correct?”
8. Say: [Beep] “Yes”
9. Prompt: “XXXXX... (Ex. “John's
phone”) (Registered voice tag) Home
(Registered location) deleted.”
Complete deletion of the phonebook
data
All data registered to the Bluetooth®
Hands-Free phonebook can be erased.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Phonebook”
3. Prompt: “Select one of the following:
New entry, edit, list names, delete,
erase all or import contact.”
4. Say: [Beep] “Erase all”
6-84
Form No.8FA7-EA-15G
5. Prompt: “Are you sure you want to
erase everything from your Hands Free
system phonebook?”
6. Say: [Beep] “Yes”
7. Prompt: “You are about to delete
everything from your Hands Free
system phonebook. Do you want to
continue?”
8. Say: [Beep] “Yes”
9. Prompt: “Please wait, erasing the
Hands Free system phonebook.”
10. Prompt: “Hands-Free system
phonebook erased.”
Read-out of names registered to the
Bluetooth® Hands-Free phonebook
Bluetooth® Hands-Free can read out the
list of names registered to its phonebook.
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Phonebook”
3. Prompt: “Select one of the following:
New entry, edit, list names, delete,
erase all or import contact.”
4. Say: [Beep] “List names”
5. Prompt: “XXXXX..., XXXXX...,
XXXXX... (Ex. “John's phone”, Mary's
phone, Bill's phone)” (Voice guidance
reads out the voice tags registered to
the phonebook.)
Press the talk button with a short press
during the read-out at the desired name,
and then say one of the following voice
commands to execute it.
l “Continue”: Continues the list readout.
Mazda5_8FA7-EA-15G_Edition2 Page281
Friday, July 10 2015 5:27 PM
Black plate (281,1)
Interior Comfort
Bluetooth® Hands-Free
l
l
l
l
“Call”: Calls the registered phonebook
data when the talk button is shortpressed.
“Edit”: Edits the registered phonebook
data when the talk button is shortpressed.
“Delete”: Deletes the registered
phonebook data when the talk button is
short-pressed.
“Previous”: Returns to the previous
phonebook data in read-out when the
talk button is short-pressed.
6. Prompt: “End of list, would you like
to start from the beginning?”
7. Say: [Beep] “No”
8. The procedure returns to Step 3.
qDTMF (Dual Tone MultiFrequency Signal) Transmission
This function is used when transmitting
DTMF via the user's voice. The receiver
of a DTMF transmission is generally a
home telephone answering machine or a
company's automated guidance call center
(When you send tone signals back
according to the voice guidance
recording).
1. Press the talk button with a short press.
2. Say: [Beep] “XXXX... send” (Say
DTMF code)
3. Prompt: “Sending XXXX... (DTMF
code)”
Hands-Free Setting
qDevice
Device registration
For the registration of a Bluetooth®
equipped device to Bluetooth® HandsFree.
Refer to Bluetooth® Hands-Free
Preparation on page 6-74.
Registered device read-out
Bluetooth® Hands-Free can read-out the
devices registered to its system.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Setup”
3. Prompt: “Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.”
4. Say: [Beep] “Pairing options”
5. Prompt: “Select one of the following:
Pair, Edit, Delete, List, or Set Pairing
Code.”
6. Say: [Beep] “List”
7. Prompt: “XXXXX..., XXXXX...,
XXXXX... (Ex. Device A, device B,
device C)” (The voice guidance reads
out the device tags registered to the
hands-free system.)
6-85
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page282
Friday, July 10 2015 5:27 PM
Black plate (282,1)
Interior Comfort
Bluetooth® Hands-Free
Press the talk button with a short press
during the read-out at the desired device,
and then say one of the following voice
commands to execute it.
l “Select phone”: Selects device (Mobile
phone) when the talk button is shortpressed.
l “Select music player”: Selects device
(Music player) when the talk button is
short-pressed.
l “Edit”: Edits device when the talk
button is short-pressed.
l “Continue”: Continues the list readout.
l “Delete”: Deletes the registered device
when the talk button is short-pressed.
l “Previous”: Returns to the previous
device in read-out when the talk button
is short-pressed.
3. Prompt: “Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.”
4. Say: [Beep] “Select phone”
5. Prompt: “Please say the name of the
device you would like to select.
Available devices are XXXXX... (Ex.
device A), XXXXX... (Ex. device B),
XXXXX... (Ex. device C). Which
device please?”
6. Say: [Beep] “XXXXX... (Ex. Device
B)”
7. Prompt: “XXXXX... (Ex. Device B).
Is this correct?”
8. Say: [Beep] “Yes” or “No”
8. Prompt: “End of list, would you like
to start from the beginning?”
9. If “Yes”, go to Step 10. If “No”, the
procedure returns to Step 5.
9. Say: [Beep] “No”
10. Prompt: “XXXXX... (Ex. Device B)
selected.”
10. Prompt: “Returning to main menu.”
Device selection
If several devices have been programmed,
the Bluetooth® unit links the device last
connected. If you would like to link a
different programmed device, it is
necessary to change the link. The order of
device priority after the link has been
changed is maintained even when the
ignition is switched off.
Hands-free phone
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Setup”
6-86
Form No.8FA7-EA-15G
Music player
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Setup”
3. Prompt: “Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.”
4. Say: [Beep] “Select music player”
5. Prompt: “Please say the name of the
device you would like to select.
Available devices are XXXXX... (Ex.
device A), XXXXX... (Ex. device B),
XXXXX... (Ex. device C). Which
device please?”
Mazda5_8FA7-EA-15G_Edition2 Page283
Friday, July 10 2015 5:27 PM
Black plate (283,1)
Interior Comfort
Bluetooth® Hands-Free
6. Say: [Beep] “XXXXX... (Ex. Device
B)”
7. Prompt: “XXXXX... (Ex. Device B).
Is this correct?”
8. Say: [Beep] “Yes” or “No”
9. If “Yes”, go to Step 10. If “No”, the
procedure returns to Step 5.
10. Prompt: “XXXXX... (Ex. Device B)
selected.”
6. Say: [Beep] “Delete”
7. Prompt: “Please say the name of the
device you would like to delete.
Available devices are XXXXX... (Ex.
device A), XXXXX... (Ex. device B),
XXXXX... (Ex. device C), or all.
Which device please?”
8. Say: [Beep] “XXXXX... (Ex. device
B)”
NOTE
NOTE
Say “All” to delete all devices (Mobile phone).
Device (Music player) selection can also be
done by operating the panel button (page
6-62).
9. Prompt: “Deleting XXXXX... (Ex.
device B...) (Registered device tag). Is
this correct?”
Registered device (Mobile phone)
deletion
10. Say: [Beep] “Yes”
Registered devices (Mobile phone) can be
deleted individually or collectively.
Registered device editing
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Setup”
3. Prompt: “Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.”
4. Say: [Beep] “Pairing options”
5. Prompt: “Select one of the following:
Pair, Edit, Delete, List, or Set Pairing
Code.”
NOTE
A registered device (Mobile phone) can be
deleted using the registration list.
11. Prompt: “Deleted”
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Setup”
3. Prompt: “Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.”
4. Say: [Beep] “Pairing options”
5. Prompt: “Select one of the following:
Pair, Edit, Delete, List, or Set Pairing
Code.”
6. Say: [Beep] “Edit”
7. Prompt: “Please say the name of the
device you would like to edit.
Available devices are XXXXX... (Ex.
device A), XXXXX... (Ex. device B),
XXXXX... (Ex. device C). Which
device please?”
6-87
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page284
Friday, July 10 2015 5:27 PM
Black plate (284,1)
Interior Comfort
Bluetooth® Hands-Free
8. Say: [Beep] “XXXXX... (Ex. device
C)”
9. Prompt: “Passcode XXXX (Passcode,
PCode). Is this correct?”
9. Prompt: “New name please?”
10. Say: [Beep] “Yes”
10. Say: [Beep] “XXXXX... (Ex. device
C)” (Speak a “device tag”, an
arbitrary name for the device.)
11. Prompt: “Passcode is enabled.”
11. Prompt: “XXXXX... (Ex. device C)
(Device tag), is this correct?”
12. Say: [Beep] “Yes”
13. Prompt: “New name saved.”
qSecurity Setting
If a passcode is set, the system cannot be
activated unless the passcode is input.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
Passcode setting
Using Bluetooth® Hands-Free with a
passcode
1. Press the pick-up button or talk button
with a short press.
2. Prompt: “Hands-Free system is
locked. State the passcode to
continue.”
3. Say: [Beep] “XXXX” (Say the set
passcode “PCode”.)
4. If the correct passcode is input, voice
guidance “XXXXXX... (Ex. “Mary's
device”) (Device tag) is connected” is
announced.
If the passcode is incorrect, voice
guidance “XXXX (4-digit passcode,
Pcode) incorrect passcode, please try
again” is announced.
1. Press the pick-up button or talk button
with a short press.
Canceling the passcode
2. Say: [Beep] “Setup”
NOTE
3. Prompt: “Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.”
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
4. Say: [Beep] “Passcode”
5. Prompt: “Passcode is disabled. Would
you like to enable it?”
6. Say: [Beep] “Yes”
7. Prompt: “Please say a 4-digit
passcode. Remember this passcode. It
will be required to use this system.”
8. Say: [Beep] “XXXX” (Say a desired 4digit passcode, “PCode”.)
6-88
Form No.8FA7-EA-15G
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Setup”
3. Prompt: “Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.”
4. Say: [Beep] “Passcode”
5. Prompt: “Passcode is enabled. Would
you like to disable it?”
Mazda5_8FA7-EA-15G_Edition2 Page285
Friday, July 10 2015 5:27 PM
Black plate (285,1)
Interior Comfort
Bluetooth® Hands-Free
6. Say: [Beep] “Yes”
7. Prompt: “Passcode is disabled.”
Confirmation Prompts
The confirmation prompt confirms the
command content to the user before
advancing to the operation requested by
the user. When this function is turned on,
the system reads out the voice input
command previously received and
confirms whether the command is correct
before advancing to the command
execution.
When the confirmation prompt function is
turned on:
(Ex. “Calling John's device. Is this
correct?”)
When the confirmation prompt function is
turned off:
(Ex. “Calling John's device.”)
NOTE
If the confirmation prompt function is turned
off when making an emergency call, the system
reads out and confirms the command before
executing it.
qVoice Recognition Learning
Function (Speaker Enrollment)
The voice recognition learning function
enables voice recognition appropriate to
the characteristics of the user's voice.
If the recognition of the voice input
commands to the system is not adequate,
this function can largely improve the
system's voice recognition of the user. If
your voice can be recognized sufficiently
without using this function, you may not
realize the added benefit of the function.
To register your voice, the voice input
command list must be read out. Read out
the list when the vehicle is parked.
Perform the registration in as quiet a place
as possible (page 6-72).
The registration must be performed
completely. The required time is a few
minutes. The user needs to be seated in
the driver's seat with the voice input
command list for voice recognition
learning open to the page indicated below.
When voice recognition learning is
done for the first time
1. Press the pick-up button or talk button
with a short press.
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Setup”
2. Say: [Beep] “Voice training”
3. Prompt: “Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.”
3. Prompt: “This operation must be
performed in a quiet environment while
the vehicle is stopped. See the owner's
manual for the list of required training
phrases. Press and release the talk
button when you are ready to begin.
Press the hangup button to cancel at
any time.”
4. Say: [Beep] “Confirmation prompts”
5. Prompt: “Confirmation prompts are
on/off. Would you like to turn
confirmation prompts off/on?”
6. Say: [Beep] “Yes”
4. Press the talk button with a short press.
7. Prompt: “Confirmation prompts are
off/on.”
6-89
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page286
Friday, July 10 2015 5:27 PM
Black plate (286,1)
Interior Comfort
Bluetooth® Hands-Free
5. The voice guidance reads out the voice
input command number (refer to the
voice input command list for voice
recognition learning). (Ex. “Please read
phrase 1”)
7. The voice guidance reads out the voice
input command number (refer to the
voice input command list for voice
recognition learning). (Ex. “Please read
phrase 1”)
6. Say: [Beep] “0123456789” (Say the
voice input command for voice
recognition learning (1 to 8) according
to the voice guidance.)
8. Say: [Beep] “0123456789” (Say the
voice input command for voice
recognition learning (1 to 8) according
to the voice guidance.)
7. Prompt: “Speaker enrollment is
complete.”
9. Prompt: “Speaker enrollment is
complete.”
NOTE
NOTE
If an error occurred in the voice recognition
learning, re-learning can be done by pressing
the talk button with a short press.
If an error occurred in the voice recognition
learning, re-learning can be done by pressing
the talk button with a short press.
Voice recognition re-learning
If voice recognition learning has already
been done.
Voice input command list for voice
recognition learning
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Voice training”
3. Prompt: “Enrollment is enabled/
disabled. Would you like to disable/
enable or retrain?”
4. Say: [Beep] “Retrain”
5. Prompt: “This operation must be
performed in a quiet environment while
the vehicle is stopped. See the owner's
manual for the list of required training
phrases. Press and release the talk
button when you are ready to begin.
Press the hangup button to cancel at
any time.”
6. Press the talk button with a short press.
6-90
Form No.8FA7-EA-15G
When reading out, the following points
must be observed:
l Read out the numbers one at a time
correctly and naturally.
(For example, “1234” must be read out
“one, two, three, four”, not “twelve, thirty
four”.)
l Do not read out parentheses. “ (” and
hyphens “-” are used for separating
numbers in a phone number.
Ex.
“ (888) 555-1212” must be spoken “Eight, eight,
eight, five, five, five, one, two, one, two.”
Phrase
1
2
3
4
5
6
7
8
Command
0123456789
(888) 555-1212
Call
Dial
Setup
Cancel
Continue
Help
Mazda5_8FA7-EA-15G_Edition2 Page287
Friday, July 10 2015 5:27 PM
Black plate (287,1)
Interior Comfort
Bluetooth® Hands-Free
NOTE
l
l
The applicable phrase appears in the
display.
After user voice registration is completed,
voice guidance “Speaker enrollment is
complete” is announced.
Voice recognition learning on/off
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Voice training”
3. Prompt: “Enrollment is enabled/
disabled. Would you like to disable/
enable or retrain?”
4. Say: [Beep] “Disable” or “Enable”
When Bluetooth® HandsFree Cannot be Used
Bluetooth® Hands-Free cannot be used
under the following conditions:
l The device is outside of the
communication area.
l The device has a malfunction.
l The device is not connected to the
hands-free unit equipped on the
vehicle.
l The device's battery is weak.
l The device is turned off.
l The device is placed where radio
reception is difficult.
l The ignition is switched off.
5. When “Disable” is spoken, the voice
recognition learning is turned off.
When “Enable” is spoken, the voice
recognition learning is turned on.
6. Prompt: “Speaker Enrollment is
disabled/enabled.”
6-91
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page288
Friday, July 10 2015 5:27 PM
Black plate (288,1)
Interior Comfort
Bluetooth® Hands-Free
Safety Certification
FCC ID: CB2MBLUEC09 IC:279BMBLUEC09
This device complies with Part 15 of the
FCC Rules and with RSS-210 of Industry
Canada. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any
interference received, including
interference that may cause undesired
operation.
WARNING
Changes or modifications not
expressively approved by the party
responsible for compliance could void
the user's authority to operate the
equipment.
The term “IC: ” before the radio
certification number only signifies that
Industry Canada technical specifications
were met.
The antenna used for this transmitter must
not be co-located or operating in
conjunction with any other antenna or
transmitter. End-users and installers must
be provided with installation instructions
and transmitter operating conditions for
satisfying RF exposure compliance.
6-92
Form No.8FA7-EA-15G
Mazda Bluetooth® HandsFree Customer Service
l
l
l
U.S.A.
Phone: 800-430-0153 (Toll-free)
www.MazdaUSA.com/bluetooth
Canada
Phone: 800-430-0153 (Toll-free)
www.mazdahandsfree.ca
Mexico
Center of Attention to Client (CAC)
Phone: 01-800-01-MAZDA (Toll-free)
Web: www.mazdamexico.com.mx
Mazda5_8FA7-EA-15G_Edition2 Page289
Friday, July 10 2015 5:27 PM
Black plate (289,1)
Interior Comfort
Interior Equipment
Sunvisors
When you need a sunvisor, lower it for
use in front or swing it to the side.
Sunvisor
qVanity Mirrors
To use the vanity mirror, lower the
sunvisor.
Interior Lights
qIlluminated Entry System
When the illuminated entry system
operates, the overhead light (switch is in
the DOOR position) turns on for:
l About 30 seconds after the driver's
door is unlocked and the ignition is
switched off (with the ignition key
removed).
l About 15 seconds after all doors are
closed.
l About 15 seconds after the ignition is
switched off (with the ignition key
removed) with all doors closed.
The light also turns off when:
l The ignition is switched ON and all
doors are closed.
l The driver's door is locked.
NOTE
l
l
Battery saver
If any door is left opened, the light turns off
after about 30 minutes to save the battery.
The light turns on again when the ignition
is switched ON, or when any door is
opened after all doors have been closed.
The operation of the illuminated entry
system can be changed.
Refer to Personalization Features on page
10-8.
6-93
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page290
Friday, July 10 2015 5:27 PM
Black plate (290,1)
Interior Comfort
Interior Equipment
qOverhead Lights
qMap Lights
Front
The map lights are switched on or off by
pressing the switches.
Switches
Switch Position
Front Overhead Lights
Light off
l
l
Light is on when any door is
open
Light is on or off when the
illuminated entry system is
on
qLuggage Compartment Light
Rear
Switch
Position
Luggage Compartment Light
Light off
Light on when the liftgate is open
Switch Position
Rear Overhead Lights
Light off
l
l
Light is on when any door is
open
Light is on or off when the
illuminated entry system is
on
Light on
6-94
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page291
Friday, July 10 2015 5:27 PM
Black plate (291,1)
Interior Comfort
Interior Equipment
Information Display
Clock/Ambient
Climate control display
temperature display
Trip computer
display
Audio display
Steering switch
qInformation Display Functions
The information display has the following functions:
l Clock
l Ambient Temperature Display
l Climate Control Display
l Audio Display
í
l Trip Computer
®
l Bluetooth
Hands-Free Display í Refer to Bluetooth® Hands-Free on page 6-70.
í
Some models.
Form No.8FA7-EA-15G
6-95
Mazda5_8FA7-EA-15G_Edition2 Page292
Friday, July 10 2015 5:27 PM
Black plate (292,1)
Interior Comfort
Interior Equipment
qClock
qAmbient Temperature Display
When the ignition is switched to ACC or
ON, the time is displayed.
When the ignition is switched ON, the
ambient temperature is displayed.
Time setting
NOTE
1. Switch the ignition to ACC or ON.
l
2. Adjust the time using the time setting
buttons ( , ).
The hours advance while the time
setting button ( ) is pressed.
The minutes advance while the time
setting button ( ) is pressed.
Time resetting
1. Switch the ignition to ACC or ON.
Under the following conditions, the ambient
temperature display may differ from the
actual ambient temperature depending on
the surroundings and vehicle conditions:
Significantly cold or hot temperatures.
Sudden changes in ambient temperature.
The vehicle is parked.
The vehicle is driven at low speeds.
Press the AUTO switch(page 6-5) for 3
seconds or more to switch the display from
Fahrenheit to Centigrade or vice versa.
l
l
l
l
l
2. Press the :00 button.
qClimate Control Display
3. When the button is pressed, the time
will be reset as follows:
The climate control system status is
displayed. To operate the climate control
system, refer to “Climate Control System”
(page 6-2).
(Example)
12:01―12:29→12:00
12:30―12:59→1:00
NOTE
When the button is pressed, the seconds will
start at “00”.
6-96
Form No.8FA7-EA-15G
qAudio Display
The audio system status is displayed. To
operate the audio system, refer to
“Audio System” (page 6-11).
Mazda5_8FA7-EA-15G_Edition2 Page293
Friday, July 10 2015 5:27 PM
Black plate (293,1)
Interior Comfort
Interior Equipment
qTrip Computer í
The trip computer can display the
following:
l The current fuel economy.
l The average fuel economy.
l The approximate distance you can
travel on the available fuel.
l The average vehicle speed.
Switch the ignition ON.
Press the INFO switch to change the
display mode.
Current fuel economy mode
Current fuel economy will be calculated
and displayed every 2 seconds.
When this mode is selected, CURRENT
will be displayed.
U.S.A.
CANADA
Average fuel economy mode
Distance-to-empty mode
Average vehicle speed mode
If you have any problems with your trip
computer, consult an Authorized Mazda
Dealer.
When you've slowed to about 5 km/h (3
mph), - - - L/100 km (- - -mpg) will be
displayed.
Current fuel economy mode
This mode displays the current fuel
economy by calculating the amount of
fuel consumption and the distance
traveled.
í
Some models.
Form No.8FA7-EA-15G
6-97
Mazda5_8FA7-EA-15G_Edition2 Page294
Friday, July 10 2015 5:27 PM
Black plate (294,1)
Interior Comfort
Interior Equipment
Average fuel economy mode
This mode displays the average fuel
economy by calculating the total fuel
consumption and the total traveled
distance since purchasing the vehicle, reconnecting the battery after disconnection,
or resetting the data. The average fuel
economy is calculated and displayed
every minute.
When this mode is selected, AVG will be
displayed.
U.S.A.
After pressing the INFO switch, - - - L/
100 km (- - - mpg) will be displayed for
about 1 minute before the fuel economy is
recalculated and displayed.
Distance-to-empty mode
This mode displays the approximate
distance you can travel on the remaining
fuel based on the fuel economy.
The distance-to-empty will be calculated
and displayed every second.
When this mode is selected, RANGE will
be displayed.
U.S.A.
CANADA
CANADA
To clear the data being displayed, press
the INFO switch for more than 1.5
second.
6-98
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page295
Friday, July 10 2015 5:27 PM
Black plate (295,1)
Interior Comfort
Interior Equipment
NOTE
l
l
CANADA
Even though the distance-to-empty display
may indicate a sufficient amount of
remaining mileage before refueling is
required, refuel as soon as possible if the
fuel gauge needle nears E or the low fuel
warning light illuminates.
The display won't change unless you add
more than approximately 5 L (6 US qt, 5
Imp qt) of fuel.
Average vehicle speed mode
This mode displays the average vehicle
speed by calculating the distance and the
time traveled since connecting the battery
or resetting the data.
Average vehicle speed will be calculated
and displayed every 10 seconds.
When this mode is selected, AVG will be
displayed.
U.S.A.
To clear the data being displayed, press
the INFO switch for more than 1.5
second. After pressing the INFO switch, - - km/h (- - - mile/h) will be displayed for
about 1 minute before the vehicle speed is
recalculated and displayed.
6-99
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page296
Friday, July 10 2015 5:27 PM
Black plate (296,1)
Interior Comfort
Interior Equipment
Cup Holder
WARNING
qFront
The front cup holder is in the center
console.
Never use a cup holder to hold hot
liquids while the vehicle is moving:
Using a cup holder to hold hot liquids
while the vehicle is moving is
dangerous. If the contents spill, you
could be scalded.
Do not put anything other than cups or
drink cans in cup holders:
Putting objects other than cups or
drink cans in a cup holder is
dangerous.
During sudden braking or
maneuvering, occupants could be hit
and injured, or objects could be
thrown around the vehicle, causing
interference with the driver and the
possibility of an accident. Only use a
cup holder for cups or drink cans.
CAUTION
To reduce the possibility of injury in
an accident or a sudden stop, keep
cup holders closed when not in use.
6-100
í
Some models.
Form No.8FA7-EA-15G
qRear
Second-row Seat
Storage box (Second-row right-side
seat) í
To use, pull out the storage box (page
6-105).
Mazda5_8FA7-EA-15G_Edition2 Page297
Friday, July 10 2015 5:27 PM
Black plate (297,1)
Interior Comfort
Interior Equipment
Third-row seat
Two cup holders are in the side-trim on
both the left and right sides.
Bottle Holder
Bottle holders are on the inside of the
doors.
Bottle holder
CAUTION
Do not use the bottle holders for
containers without caps. The
contents may spill when the door is
opened or closed.
6-101
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page298
Friday, July 10 2015 5:27 PM
Interior Comfort
Interior Equipment
Storage Compartments
WARNING
Keep storage boxes closed when
driving:
Driving with the storage boxes open
is dangerous. To reduce the
possibility of injury in an accident or
a sudden stop, keep the storage
boxes closed when driving.
Do not put articles in storage spaces
with no lid:
Putting articles in storage spaces
with no lid is dangerous as they
could be thrown around the cabin if
the vehicle is suddenly accelerated
and cause injury depending on how
the article is stored.
CAUTION
Do not leave lighters or eyeglasses in
the storage boxes while parked under
the sun. A lighter could explode or
the plastic material in eyeglasses
could deform and crack from high
temperature.
6-102
Form No.8FA7-EA-15G
Black plate (298,1)
Mazda5_8FA7-EA-15G_Edition2 Page299
Friday, July 10 2015 5:27 PM
Black plate (299,1)
Interior Comfort
Interior Equipment
qSmall Item Storage Spaces
WARNING
Do not place objects in the small storage spaces which can roll around easily or stick
out.
Putting objects in the small item storage spaces which can roll around easily or stick
out is dangerous. During emergency braking or a collision, the objects could be
thrown around the cabin and cause injury.
The spaces can be used to store small items.
6-103
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page300
Friday, July 10 2015 5:27 PM
Black plate (300,1)
Interior Comfort
Interior Equipment
qGlove Compartment
qUnderseat Storage
To open the glove compartment, pull the
latch toward you.
If your vehicle has a right second-row
storage box (page 6-105), when using the
storage box, small items can be stored
under the both bottoms of the second-row
seats.
To close the glove compartment, firmly
press in the center of the glove
compartment lid.
qCenter Console
6-104
Form No.8FA7-EA-15G
To use the under seat storage
Pull the strap and lift the seat bottom up
and forward.
Mazda5_8FA7-EA-15G_Edition2 Page301
Friday, July 10 2015 5:27 PM
Black plate (301,1)
Interior Comfort
Interior Equipment
CAUTION
Do not store items above the marked
line indicated in the illustration
below. If the items are stored above
the marked line, the seat bottom will
not lock and could cause serious
injury.
CAUTION
When returning the seat-bottom to
its upright position, make sure there
is no object lodged between the
seatback and the seat belt buckle. If
the seat-bottom is returned to its
upright position in this condition it
could damage the seat belt buckle. If
the seat belt buckle does not return
to its position after removing the
obstruction, move the buckle
rearward with your hand and then
lower the seat-bottom.
Marked line
To return the seat bottom
Carefully lower the seat bottom backward
until it locks in place. Attempt to lift the
seat bottom to make sure it is firmly
locked down.
Buckle
qStorage Box í
The storage box is stowed under the
bottom of the right second-row seat.
Small items can be stored in this box.
í
Some models.
Form No.8FA7-EA-15G
6-105
Mazda5_8FA7-EA-15G_Edition2 Page302
Friday, July 10 2015 5:27 PM
Black plate (302,1)
Interior Comfort
Interior Equipment
To use the storage box
1. Pull the strap and lift the seat bottom
up and forward.
3. More items can be stowed if the cover
is removed.
NOTE
NOTE
If it is hard to lift the seat bottom, raise the
reclining lever and lean back slightly.
2. Pull out the storage box.
The cover can be kept in the seatback pocket of
the driver's seat.
4. Carefully lower the seat bottom
backward until it locks in place.
Attempt to lift the seat bottom to make
sure it is firmly locked down.
To stow the storage box
1. Clean out the inside of the storage box,
and then attach the cover to it.
2. Pull the strap and lift the seat bottom
up and forward.
3. Make sure the underseat storage area is
empty before storing it.
4. Carefully lower the seat bottom
backward until it locks in place.
Attempt to lift the seat bottom to make
sure it is firmly locked down.
When folding the seatback of the right
second-row seat, make sure the storage
box is stowed. If the storage box is not
stowed, it could be damaged.
6-106
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page303
Friday, July 10 2015 5:27 PM
Black plate (303,1)
Interior Comfort
Interior Equipment
CAUTION
When returning the seat-bottom to
its upright position, make sure there
is no object lodged between the
seatback and the seat belt buckle. If
the seat-bottom is returned to its
upright position in this condition it
could damage the seat belt buckle. If
the seat belt buckle does not return
to its position after removing the
obstruction, move the buckle
rearward with your hand and then
lower the seat-bottom.
Use the loops in the luggage compartment
to secure cargo with a rope or net. The
tensile strength of the loops is 196 N (20
kgf, 44 lbf). Do not apply excessive force
to the loops as it will damage them.
qCargo Sub-Compartment
Lift the cover.
Buckle
Trunk board
qCargo Securing Loops
WARNING
Make sure luggage and cargo are
secured before driving:
Not securing cargo while driving is
dangerous as it could move or be
crushed during sudden braking or a
collision and cause injury.
Cargo subcompartment
6-107
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page304
Friday, July 10 2015 5:27 PM
Black plate (304,1)
Interior Comfort
Interior Equipment
qRear Coat Hooks
WARNING
Never hang heavy or sharp objects on
the assist grips and coat hooks:
Hanging heavy or sharp-ended
objects such as a coat hanger from
the assist grips or coat hooks is
dangerous as they can fly off and hit
an occupant in the cabin if a curtain
air bag was to deploy, which could
result in serious injury or death.
qLuggage Compartment
A golf bag can be carried in the luggage
compartment.
To place a golf bag in the luggage
compartment, use the following
procedure:
1. Remove the cover for the side storage
space.
Always hang clothes on the coat hooks
and the assist grips without hangers.
Coat hook
2. Insert the top of the golf bag into the
side storage space.
Side storage space
NOTE
l
l
6-108
Form No.8FA7-EA-15G
Some golf bags cannot fit depending on
their size.
Golf bags up to nine inches in diameter can
be carried.
Mazda5_8FA7-EA-15G_Edition2 Page305
Friday, July 10 2015 5:27 PM
Black plate (305,1)
Interior Comfort
Interior Equipment
Accessory Sockets
Switch the ignition to ACC or ON.
Only use genuine Mazda accessories or
the equivalent requiring no greater than
120 W (DC 12 V, 10 A).
Front
Rear
CAUTION
Ø To prevent accessory socket
damage or electrical failure, pay
attention to the following:
Ø Do not use accessories that
require more than 120 W (DC 12
V, 10 A).
Ø Do not use accessories that are
not genuine Mazda accessories
or the equivalent.
Ø Close the cover when the
accessory socket is not in use to
prevent foreign objects and
liquids from getting into the
accessory socket.
Ø Correctly insert the plug into
the accessory socket.
Ø Noise may occur on the audio
playback or TV reception
depending on the device connected
to the accessory socket.
Ø Depending on the device
connected to the accessory socket,
the vehicle's electrical system may
be affected, which could cause the
warning light to illuminate.
Disconnect the connected device
and make sure that the problem is
resolved. If the problem is
resolved, disconnect the device
from the socket and switch the
ignition off. If the problem is not
resolved, consult an Authorized
Mazda Dealer.
NOTE
To prevent discharging of the battery, do not
use the socket for long periods with the engine
off or idling.
6-109
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page306
Friday, July 10 2015 5:27 PM
6-110
Form No.8FA7-EA-15G
Black plate (306,1)
Mazda5_8FA7-EA-15G_Edition2 Page307
Friday, July 10 2015 5:27 PM
7
Black plate (307,1)
In Case of an Emergency
Helpful information on what to do in an emergency.
Parking in an Emergency ............................................................. 7-2
Parking in an Emergency .......................................................... 7-2
Flat Tire ......................................................................................... 7-3
Spare Tire and Tool Storage ...................................................... 7-3
Changing a Flat Tire ................................................................. 7-7
Overheating ................................................................................. 7-14
Overheating ............................................................................. 7-14
Emergency Starting ....................................................................
Starting a Flooded Engine .......................................................
Jump-Starting ..........................................................................
Push-Starting ...........................................................................
7-16
7-16
7-17
7-21
Emergency Towing .....................................................................
Towing Description .................................................................
Tiedown Hooks í ....................................................................
Recreational Towing ...............................................................
7-22
7-22
7-23
7-25
í
Some models.
Form No.8FA7-EA-15G
7-1
Mazda5_8FA7-EA-15G_Edition2 Page308
Friday, July 10 2015 5:27 PM
In Case of an Emergency
Parking in an Emergency
Parking in an Emergency
The hazard warning lights should always
be used when you stop on or near a
roadway in an emergency.
The hazard warning lights warn other
drivers that your vehicle is a traffic hazard
and that they must take extreme caution
when near it.
Hazard warning flasher
Depress the hazard warning flasher and all
the turn signals will flash.
NOTE
l
l
The turn signals do not work when the
hazard warning lights are on.
Check local regulations about the use of
hazard warning lights while the vehicle is
being towed to verify that it is not in
violation of the law.
7-2
Form No.8FA7-EA-15G
Black plate (308,1)
Mazda5_8FA7-EA-15G_Edition2 Page309
Friday, July 10 2015 5:27 PM
Black plate (309,1)
In Case of an Emergency
Flat Tire
Spare Tire and Tool Storage
Spare tire and tools are stored in the locations illustrated in the diagram.
Jack lever
Jack
Lug wrench Tiedown eyelet
Spare tire
Flat tire belt storage bag
Some models.
7-3
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page310
Friday, July 10 2015 5:27 PM
Black plate (310,1)
In Case of an Emergency
Flat Tire
qJack
To secure the jack
To remove the jack
1. Insert the wing bolt into the jack with
the jack screw pointing down and turn
the wing bolt clockwise to temporarily
tighten it.
1. Remove the cover.
2. Turn the jack screw in the direction
shown in the figure.
2. Turn the wing bolt and jack screw
counterclockwise.
Wing bolt
Jack screw
3. Turn the wing bolt completely to
secure the jack.
NOTE
If the jack is not completely secured, it could
rattle while driving. Make sure the jack screw
is sufficiently tightened.
Wing bolt
Jack screw
Maintenance
l
l
l
7-4
Form No.8FA7-EA-15G
Always keep the jack clean.
Make sure the moving parts are kept
free from dirt or rust.
Make sure the screw thread is
adequately lubricated.
Mazda5_8FA7-EA-15G_Edition2 Page311
Friday, July 10 2015 5:27 PM
Black plate (311,1)
In Case of an Emergency
Flat Tire
qSpare Tire
The temporary spare tire is lighter and
smaller than a conventional tire, and is
designed only for emergency use and
should be used only for VERY short
periods. Temporary spare tires should
NEVER be used for long drives or
extended periods.
WARNING
Do not install the temporary spare tire
on the front wheels (driving wheels):
Driving with the temporary spare tire
on one of the front driving wheels is
dangerous. Handling will be affected.
You could lose control of the vehicle,
especially on ice or snow bound
roads, and have an accident. Move a
regular tire to the front wheel and
install the temporary spare tire to the
rear.
CAUTION
Ø When using the temporary spare
tire, driving stability may decrease
compared to when using only the
conventional tire.
Drive carefully.
Ø To avoid damage to the temporary
spare tire or to the vehicle, observe
the following precautions:
Ø Do not exceed 80 km/h (50
mph).
Ø Avoid driving over obstacles.
Also, do not drive through an
automatic car wash. This tire's
diameter is smaller than a
conventional tire, so the ground
clearance is reduced.
Ø Do not use a tire chain on this
tire because it won't fit
properly.
Ø Do not use your temporary
spare tire on any other vehicle;
it has been designed only for
your Mazda.
Ø Use only one temporary spare
tire on your vehicle at the same
time.
NOTE
(With Tire Pressure Monitoring System)
A tire pressure sensor is not installed to the
temporary spare tire. The warning light will
flash continuously while the temporary spare
tire is being used (page 5-30).
To remove the spare tire
1. Fold the third-row seat forward (page
2-10).
7-5
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page312
Friday, July 10 2015 5:27 PM
Black plate (312,1)
In Case of an Emergency
Flat Tire
2. Open and fold back the trunk board
over the third-row seatback.
Trunk board
3. Remove the cargo sub-compartment.
Cargo subcompartment
4. Turn the tire hold-down bolt
counterclockwise with the lug wrench.
7-6
Form No.8FA7-EA-15G
To secure the spare tire
Perform the removal procedure in reverse.
Mazda5_8FA7-EA-15G_Edition2 Page313
Friday, July 10 2015 5:27 PM
Black plate (313,1)
In Case of an Emergency
Flat Tire
Changing a Flat Tire
NOTE
If the following occurs while driving, it could
indicate a flat tire.
l Steering becomes difficult.
l The vehicle begins to vibrate excessively.
l The vehicle pulls in one direction.
If you have a flat tire, drive slowly to a
level spot that is well off the road and out
of the way of traffic to change the tire.
Stopping in traffic or on the shoulder of a
busy road is dangerous.
WARNING
Be sure to follow the directions for
changing a tire:
Changing a tire is dangerous if not
done properly. The vehicle can slip off
the jack and seriously injure
someone.
No person should place any portion
of their body under a vehicle that is
supported by a jack.
NOTE
Make sure the jack is well lubricated before
using it.
(With Tire Pressure Monitoring System)
l Be sure to register the tire pressure sensor
ID signal code whenever tires or wheels are
changed (page 5-32).
l
1. Park on a level surface off the right-ofway and firmly set the parking brake.
2. Put a vehicle with an automatic
transaxle in Park (P), a manual
transaxle in Reverse (R) or 1, and turn
off the engine.
3. Turn on the hazard warning flasher.
4. Have everyone get out of the vehicle
and away from the vehicle and traffic.
5. Remove the jack, tool, and spare tire
(page 7-3).
6. Block the wheel diagonally opposite
the flat tire. When blocking a wheel,
place a tire block both in front and
behind the tire.
Never allow anyone inside a vehicle
supported by a jack:
Allowing someone to remain in a
vehicle supported by a jack is
dangerous. The occupant could cause
the vehicle to fall resulting in serious
injury.
CAUTION
(With Tire Pressure Monitoring
System)
The wheels equipped on your Mazda
are specially designed for installation
of the tire pressure sensors. Do not
use non-genuine wheels, otherwise it
may not be possible to install the tire
pressure sensors.
NOTE
When blocking a tire, use rocks or wood blocks
of sufficient size if possible to hold the tire in
place.
7-7
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page314
Friday, July 10 2015 5:27 PM
Black plate (314,1)
In Case of an Emergency
Flat Tire
qRemoving a Flat Tire
1. Loosen the lug nuts by turning them
counterclockwise one turn each, but do
not remove any lug nuts until the tire
has been raised off the ground.
4. Place the jack under the jack-up
position closest to the tire being
changed with the jack head squarely
under the jack-up point.
Jacking position
2. Place the jack on the ground.
3. Turn the jack screw in the direction
shown in the figure and adjust the jack
head so that it is close to the jack-up
position.
5. Continue raising the jack head
gradually by rotating the screw with
your hand until the jack head is
inserted into the jack-up position.
Tire blocks
Jack head
Jacking position
7-8
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page315
Friday, July 10 2015 5:27 PM
Black plate (315,1)
In Case of an Emergency
Flat Tire
WARNING
6. Insert the jack lever and attach the lug
wrench to tire jack.
Use only the front and rear jacking
positions recommended in this manual:
Attempting to jack the vehicle in
positions other than those
recommended in this manual is
dangerous. The vehicle could slip off
the jack and seriously injure or even
kill someone. Use only the front and
rear jacking positions recommended
in this manual.
Do not jack up the vehicle in a position
other than the designated jack-up
position or place any objects on or
under the jack:
Jacking up the vehicle in a position
other than the designated jack-up
position or placing objects on or
under the jack is dangerous as it
could deform the vehicle body or the
vehicle could fall off the jack
resulting in an accident.
7. Turn the lug wrench clockwise and
raise the vehicle high enough so that
the spare tire can be installed. Before
removing the lug nuts, make sure your
Mazda is firmly in position and that it
cannot slip or move.
Use only the jack provided with your
Mazda:
Using a jack that is not designed for
your Mazda is dangerous. The vehicle
could slip off the jack and seriously
injure someone.
Never place objects under the jack:
Jacking the vehicle with an object
under the jack is dangerous. The jack
could slip and someone could be
seriously injured by the jack or the
falling vehicle.
7-9
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page316
Friday, July 10 2015 5:27 PM
Black plate (316,1)
In Case of an Emergency
Flat Tire
WARNING
Do not jack up the vehicle higher than
is necessary:
Jacking up the vehicle higher than is
necessary is dangerous as it could
destabilize the vehicle resulting in an
accident.
Do not start the engine or shake the
vehicle while it is jacked up:
Starting the engine or shaking the
vehicle while it is jacked up is
dangerous as it could cause the
vehicle to fall off the jack resulting in
an accident.
Never go under the vehicle while it is
jacked up:
Going under the vehicle while it is
jacked up is dangerous as it could
result in death or serious injury if the
vehicle were to fall off the jack.
8. Remove the lug nuts by turning them
counterclockwise; then remove the
wheel.
qLocking Lug Nuts í
If your vehicle has Mazda optional
antitheft wheel lug nuts, one on each
wheel will lock the tires and you must use
a special key to unlock them. This key
will attach to the lug wrench. Register
them with the lock manufacturer by filling
out the card provided in the glove
compartment and mailing it in the
accompanying envelope. If you lose this
key, consult an Authorized Mazda Dealer
or use the lock manufacturer's order form,
which is with the registration card.
Accessory wheel locks cannot be used on
steel wheels. This includes situations
when the spare tire is installed. If the
spare tire is installed, one of the original
lug nuts (which should still be in the
vehicle) must be installed in place of the
wheel lock.
Antitheft lug nut
Special key
To remove an antitheft lug nut
1. Obtain the special key for the antitheft
lug nut.
2. Place the special key on top of the
antitheft lug nut, and be sure to hold
the key square to it. If you hold the key
at an angle, you may damage both key
and nut. Do not use a power impact
wrench.
7-10
í
Some models.
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page317
Friday, July 10 2015 5:27 PM
Black plate (317,1)
In Case of an Emergency
Flat Tire
3. Place the lug wrench on top of the key
and apply pressure. Turn the wrench
counterclockwise.
To install the antitheft lug nut
1. Place the special key on top of the nut,
and be sure to hold the key square to it.
If you hold the key at an angle, you
may damage both key and nut. Do not
use a power impact wrench.
2. Place the lug wrench on top of the
special key, apply pressure, and turn it
clockwise.
Nut tightening torque
N·m (kgf·m, ft·lbf)
88―118 (9―12, 65―87)
WARNING
Make sure the mounting surfaces of
the wheel, hub and lug nuts are clean
before changing or replacing tires:
When changing or replacing a tire,
not removing dirt and grime from the
mounting surfaces of the wheel, hub
and hub bolts is dangerous. The lug
nuts could loosen while driving and
cause the tire to come off, resulting in
an accident.
2. Mount the spare tire.
3. Install the lug nuts with the beveled
edge inward; tighten them by hand.
qMounting the Spare Tire
1. Remove dirt and grime from the
mounting surfaces of the wheel and
hub, including the hub bolts, with a
cloth.
WARNING
Do not apply oil or grease to lug nuts
and bolts and do not tighten the lug
nuts beyond the recommended
tightening torque:
Applying oil or grease to lug nuts and
bolts is dangerous. The lug nuts
could loosen while driving and cause
the tire to come off, resulting in an
accident. In addition, lug nuts and
bolts could be damaged if tightened
more than necessary.
7-11
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page318
Friday, July 10 2015 5:27 PM
Black plate (318,1)
In Case of an Emergency
Flat Tire
4. Turn the lug wrench counterclockwise
and lower the vehicle. Use the lug
wrench to tighten the nuts in the order
shown.
6. Remove the lid by pressing the two
latches on the cargo sub-compartment.
7. Remove the belt for securing the flat
tire.
If you are unsure of how tight the nuts
should be, have them inspected at an
Authorized Mazda Dealer.
Nut tightening torque
N·m (kgf·m, ft·lbf)
88―118 (9―12, 65―87)
WARNING
Always securely and correctly tighten
the lug nuts:
Improperly or loosely tightened lug
nuts are dangerous. The wheel could
wobble or come off. This could result
in loss of vehicle control and cause a
serious accident.
Be sure to reinstall the same nuts you
removed or replace them with metric
nuts of the same configuration:
Because the wheel studs and lug nuts
on your Mazda have metric threads,
using a non-metric nut is dangerous.
On a metric stud, it would not secure
the wheel and would damage the
stud, which could cause the wheel to
slip off and cause an accident.
5. Replace the cargo sub-compartment.
7-12
Form No.8FA7-EA-15G
8. Return the third-row seatback to its
original position.
Refer to Folding the Third-Row Seat
on page 2-11.
9. Place the flat tire in the cargo subcompartment.
Mazda5_8FA7-EA-15G_Edition2 Page319
Friday, July 10 2015 5:27 PM
Black plate (319,1)
In Case of an Emergency
Flat Tire
10. Thread the belt through the wheel as
shown in the figure, then attach the
belt clips to the cargo securing loops
on the back of the third-row seat.
13. Check the tire inflation pressure.
Refer to Tires on page 10-6.
14. Have the flat tire repaired or replaced
as soon as possible.
WARNING
Do not drive with any tires that have
incorrect air pressure:
Driving on tires with incorrect air
pressure is dangerous. Tires with
incorrect pressure could affect
handling and result in an accident.
When you check the regular tires' air
pressure, check the spare tire, too.
NOTE
(With Tire Pressure Monitoring System)
A tire pressure sensor is not installed to the
temporary spare tire. The warning light will
flash continuously while the temporary spare
tire is being used (page 5-30).
NOTE
To prevent the jack and tool from rattling, store
them properly.
11. Pull the belt end to secure the flat tire.
12. Remove the tire blocks and store the
tools and jack.
7-13
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page320
Friday, July 10 2015 5:27 PM
Black plate (320,1)
In Case of an Emergency
Overheating
Overheating
If the High engine coolant temperature
warning light illuminates, the vehicle
loses power, or you hear a loud knocking
or pinging noise, the engine is probably
too hot.
WARNING
Switch the ignition to off and
make sure the fan is not running before
attempting to work near the cooling
fan:
Working near the cooling fan when it
is running is dangerous. The fan
could continue running indefinitely
even if the engine has stopped and
the engine compartment temperature
is high. You could be hit by the fan
and seriously injured.
Do not remove either cooling
system caps when the engine and
radiator are hot:
When the engine and radiator are
hot, scalding coolant and steam may
shoot out under pressure and cause
serious injury.
Open the hood ONLY after steam is no
longer escaping from the engine:
Steam from an overheated engine is
dangerous. The escaping steam could
seriously burn you.
If the High engine coolant temperature
warning light illuminates:
1. Drive safely to the side of the road and
park off the right-of-way.
7-14
Form No.8FA7-EA-15G
2. Put a vehicle with an automatic
transaxle in park (P), a manual
transaxle in neutral.
3. Apply the parking brake.
4. Turn off the air conditioner.
5. Check whether coolant or steam is
escaping from under the hood or from
the engine compartment.
If steam is coming from the engine
compartment:
Do not go near the front of the vehicle.
Stop the engine.
Wait until the steam dissipates, then
open the hood and start the engine.
If neither coolant nor steam is
escaping:
Open the hood and idle the engine until
it cools.
CAUTION
If the cooling fan does not operate
while the engine is running, the
engine temperature will increase.
Stop the engine and call an
Authorized Mazda Dealer.
6. Make sure the cooling fan is operating,
then turn off the engine after the
temperature has decreased.
7. When cool, check the coolant reservoir
level.
If it's low, look for coolant leaks from
the radiator and hoses.
Mazda5_8FA7-EA-15G_Edition2 Page321
Friday, July 10 2015 5:27 PM
Black plate (321,1)
In Case of an Emergency
Overheating
If you find a leak or other damage, or if
coolant is still leaking:
Stop the engine and call an Authorized
Mazda Dealer.
Coolant reservoir
Cooling system cap
Cooling fan
If you find no problems, the engine is
cool, and no leaks are obvious:
Carefully add coolant as required (page
8-13).
CAUTION
If the engine continues to overheat or
frequently overheats, have the
cooling system inspected. The engine
could be seriously damaged unless
repairs are made. Consult an
Authorized Mazda Dealer.
7-15
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page322
Friday, July 10 2015 5:27 PM
In Case of an Emergency
Emergency Starting
Starting a Flooded Engine
If the engine fails to start, it may be
flooded (excessive fuel in the engine).
Follow this procedure:
1. If the engine does not start within five
seconds on the first try, switch the
ignition off, wait ten seconds and try
again.
2. Make sure the parking brake is on.
3. Depress the accelerator all the way and
hold it there.
4. Depress the clutch pedal (Manual
transaxle) or the brake pedal
(Automatic transaxle).
5. Switch the ignition to START and hold
it there―for up to ten seconds. If the
engine starts, release the key and
accelerator immediately because the
engine will suddenly rev up.
6. If the engine fails to start, crank it
without depressing the accelerator―for
up to ten seconds.
If the engine still does not start using the
above procedure, have your vehicle
inspected by an Authorized Mazda
Dealer.
7-16
Form No.8FA7-EA-15G
Black plate (322,1)
Mazda5_8FA7-EA-15G_Edition2 Page323
Friday, July 10 2015 5:27 PM
Black plate (323,1)
In Case of an Emergency
Emergency Starting
Jump-Starting
Jump-starting is dangerous if done incorrectly. So follow the procedure carefully. If you
feel unsure about jump-starting, we strongly recommend that you have a competent service
technician do the work.
WARNING
Follow These Precautions Carefully:
To ensure safe and correct handling of the battery, read the following precautions
carefully before using the battery or inspecting it.
Always wear eye protection when working near the battery:
Working without eye protection is dangerous. Battery fluid contains SULFURIC ACID
which could cause blindness if splashed into your eyes. Also, hydrogen gas produced
during normal battery operation, could ignite and cause the battery to explode.
Wear eye protection and protective gloves to prevent contact with battery
fluid:
Spilled battery fluid is dangerous.
Battery fluid contains SULFURIC ACID which could cause serious injuries if it gets in
eyes, skin or clothing. If this happens, immediately flush your eyes with water for 15
minutes or wash your skin thoroughly and get medical attention.
Always keep batteries out of the reach of children:
Allowing children to play near batteries is dangerous. Battery fluid could cause
serious injuries if it gets in the eyes or on the skin.
Do not allow the positive ( ) terminal to contact any other metal object that
could cause sparks:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries. When working near a
battery, do not allow metal tools to contact the positive ( ) or negative ( )
terminal of the battery.
7-17
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page324
Friday, July 10 2015 5:27 PM
Black plate (324,1)
In Case of an Emergency
Emergency Starting
Keep all flames, including cigarettes, and sparks away from open battery cells:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries.
Do not jump-start a frozen battery or one with a low fluid level:
Jump-starting a frozen battery or one with a low fluid level is dangerous. It may
rupture or explode, causing serious injury.
Connect the negative cable to a good ground point away from the battery:
Connecting the end of the second jumper cable to the negative ( ) terminal of the
discharged battery is dangerous.
A spark could cause the gas around the battery to explode and injure someone.
Route the jumper cables away from parts that will be moving:
Connecting a jumper cable near or to moving parts (cooling fans, belts) is dangerous.
The cable could get caught when the engine starts and cause serious injury.
CAUTION
Use only a 12 V booster system. You can damage a 12 V starter, ignition system, and
other electrical parts beyond repair with a 24 V power supply (two 12 V batteries in
series or a 24 V motor generator set).
Connect cables in numerical order and disconnect in reverse order.
Jumper cables
Booster battery
7-18
Form No.8FA7-EA-15G
Discharged battery
Mazda5_8FA7-EA-15G_Edition2 Page325
Friday, July 10 2015 5:27 PM
Black plate (325,1)
In Case of an Emergency
Emergency Starting
1. Remove the battery cover from its front
side.
CAUTION
2 Detach the clip facing the vehicle
interior first and pull it outward
with your finger approx. 4 mm (0.2
in). Then, lift the cover slightly to
clear the lock.
Clip
Ø Do not use a tool which applies
excessive force such as a
screwdriver or pliers.
If excessive force is applied to the
clips, they could be damaged.
To prevent damaging the battery
cover, remove/install the battery
cover using the following
procedure.
Removing battery cover
1 Detach the clip facing the side of
the vehicle first and pull it outward
with your finger approx. 4 mm (0.2
in). Then, lift the cover slightly to
clear the lock.
Clip
7-19
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page326
Friday, July 10 2015 5:27 PM
Black plate (326,1)
In Case of an Emergency
Emergency Starting
3 Pull out the battery cover being
careful not to allow it to contact
the cowl grille.
Battery cover
Cowl grille
Installing battery cover
1 Being careful not to contact the
cowl grille, insert the tabs on the
one end of the battery cover into
the holes of the battery tray and
engage the tabs.
Cowl grille
2 Attach the clips on both sides of
the battery cover.
Tabs
Holes
Clip
2. Make sure the booster battery is 12 V
and that its negative terminal is
grounded.
3. If the booster battery is in another
vehicle, don't allow both vehicles to
touch. Turn off the engine of the
vehicle with the booster battery and all
unnecessary electrical loads in both
vehicles.
4. Connect the jumper cables in the exact
sequence as in the illustration.
l
l
l
l
Connect one end of a cable to the
positive terminal on the discharged
battery (1).
Attach the other end to the positive
terminal on the booster battery (2).
Connect one end of the other cable
to the negative terminal of the
booster battery (3).
Connect the other end to the ground
point indicated in the illustration
away from the discharged battery
(4).
5. Start the engine of the booster vehicle
and run it a few minutes. Then start the
engine of the other vehicle.
7-20
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page327
Friday, July 10 2015 5:27 PM
Black plate (327,1)
In Case of an Emergency
Emergency Starting
6. When finished, carefully disconnect the
cables in the reverse order described in
the illustration.
NOTE
Verify that the covers are securely installed.
Push-Starting
Do not push-start your Mazda.
WARNING
Never tow a vehicle to start it:
Towing a vehicle to start it is
dangerous. The vehicle being towed
could surge forward when its engine
starts, causing the two vehicles to
collide. The occupants could be
injured.
CAUTION
Do not push-start a vehicle that has
a manual transaxle. It can damage
the emission control system.
NOTE
You can't start a vehicle with an automatic
transaxle by pushing it.
7-21
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page328
Friday, July 10 2015 5:27 PM
Black plate (328,1)
In Case of an Emergency
Emergency Towing
Towing Description
We recommend that towing be done only
by an Authorized Mazda Dealer or a
commercial tow-truck service.
CAUTION
Do not tow the vehicle pointed
backward with driving wheels on the
ground. This may cause internal
damage to the transaxle.
Proper lifting and towing are necessary to
prevent damage to the vehicle.
Government and local laws must be
followed.
A towed vehicle usually should have its
drive wheels (front wheels) off the
ground. If excessive damage or other
conditions prevent this, use wheel dollies.
CAUTION
Wheel dollies
When towing with the rear wheels on the
ground, release the parking brake.
7-22
Form No.8FA7-EA-15G
Do not tow with sling-type
equipment. This could damage your
vehicle. Use wheel-lift or flatbed
equipment.
Mazda5_8FA7-EA-15G_Edition2 Page329
Friday, July 10 2015 5:27 PM
Black plate (329,1)
In Case of an Emergency
Emergency Towing
Tiedown Hooks í
CAUTION
Do not use the front and rear
tiedown eyelets for towing the
vehicle.
They have been designed only for
securing the vehicle to a transport
vessel during shipping.
Using the eyelets for any other
purpose could result in the vehicle
being damaged.
NOTE
If it is difficult to remove the tiedown eyelet,
wrap the jack lever with a cloth as shown in
the figure and press the marking on the cover
to remove it.
Cover
qTiedown Hook-Front
1. Remove the tiedown eyelet and the lug
wrench from the trunk (page 7-3).
2. Press the marking on the cover as
shown in the figure to remove the
cover.
3. Securely install the tiedown eyelet
using the lug wrench.
Lug wrench
CAUTION
The cap cannot be completely
removed. Do not use excessive force
as it may damage the cap or scratch
the painted bumper surface.
í
Some models.
Form No.8FA7-EA-15G
7-23
Mazda5_8FA7-EA-15G_Edition2 Page330
Friday, July 10 2015 5:27 PM
Black plate (330,1)
In Case of an Emergency
Emergency Towing
4. Hook the tying rope to the tiedown
eyelet.
qTiedown Hooks-Rear
Tiedown hook
CAUTION
If the tiedown eyelet is not securely
tightened, it may loosen or disengage
from the bumper when tying down
the vehicle. Make sure that the
tiedown eyelet is securely tightened
to the bumper.
7-24
Form No.8FA7-EA-15G
CAUTION
The rear tiedown hook is designed
only for lashing the vehicle during
overseas transport. Do not use the
rear tiedown hook for any other use
such as transporting the vehicle on
trucks or railway.
Mazda5_8FA7-EA-15G_Edition2 Page331
Friday, July 10 2015 5:27 PM
Black plate (331,1)
In Case of an Emergency
Emergency Towing
Recreational Towing
An example of “recreational towing” is
towing your vehicle behind a motorhome.
The transaxle is not designed for towing
this vehicle on all 4 wheels.
When doing recreational towing refer to
“Towing Description” (page 7-22) and
“Tiedown Hook” (page 7-23) and
carefully follow the instructions.
7-25
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page332
Friday, July 10 2015 5:27 PM
7-26
Form No.8FA7-EA-15G
Black plate (332,1)
Mazda5_8FA7-EA-15G_Edition2 Page333
Friday, July 10 2015 5:27 PM
8
Black plate (333,1)
Maintenance and Care
How to keep your Mazda in top condition.
Introduction .................................................................................. 8-2
Introduction ............................................................................... 8-2
Scheduled Maintenance ................................................................ 8-4
Scheduled Maintenance ............................................................ 8-4
Owner Maintenance ..................................................................... 8-7
Owner Maintenance Schedule .................................................. 8-7
Owner Maintenance Precautions ............................................... 8-8
Engine Compartment Overview .............................................. 8-10
Engine Oil ............................................................................... 8-11
Engine Coolant ....................................................................... 8-13
Brake/Clutch Fluid .................................................................. 8-15
Power Steering Fluid ............................................................... 8-15
Automatic Transaxle Fluid (ATF) í ........................................ 8-16
Washer Fluid ........................................................................... 8-17
Body Lubrication .................................................................... 8-18
Wiper Blades ........................................................................... 8-19
Battery ..................................................................................... 8-23
Tires ........................................................................................ 8-27
Light Bulbs ............................................................................. 8-34
Fuses ....................................................................................... 8-42
Appearance Care ........................................................................
How to Minimize Environmental Paint Damage ....................
Exterior Care ...........................................................................
Interior Care ............................................................................
í
Some models.
Form No.8FA7-EA-15G
8-48
8-48
8-50
8-55
8-1
Mazda5_8FA7-EA-15G_Edition2 Page334
Friday, July 10 2015 5:27 PM
Black plate (334,1)
Maintenance and Care
Introduction
Introduction
Be extremely careful and prevent injury to yourself and others or damage to your vehicle
when using this manual for inspection and maintenance.
If you are unsure about any procedure it describes, we strongly urge you to have a reliable
and qualified service shop perform the work, preferably an Authorized Mazda Dealer.
Factory-trained Mazda technicians and genuine Mazda parts are best for your vehicle.
Without this expertise and the parts that have been designed and made especially for your
Mazda, inadequate, incomplete, and insufficient servicing may result in problems. This
could lead to vehicle damage or an accident and injuries.
For expert advice and quality service, consult an Authorized Mazda Dealer.
To continue warranty eligibility and to protect your investment, it is your responsibility to
properly maintain your vehicle according to factory recommended schedules outlined in
this manual. As part of this you must keep your maintenance records, receipts, repair orders
and any other documents as evidence this maintenance was performed. You must present
these documents, should any warranty coverage disagreement occur. Failure to do so can
result in your warranty being voided either in whole or in part.
This evidence may consist of the following:
l The Mazda Scheduled Maintenance Record, refer to the Warranty Booklet, must be
completely filled out showing mileage, repair order number, date for each service, and
signed by a qualified automotive service technician who service vehicles.
l Original copies of repair orders or other receipts that include the mileage and date the
vehicle was serviced. Each receipt should be signed by a qualified automotive service
technician.
l For self maintenance, a statement that you completed the maintenance yourself,
displaying mileage and the date the work was performed. Also, receipts for the
replacement parts (fluid, filters, etc.) indicating the date and mileage must accompany
this statement.
NOTE
If you elect to perform maintenance yourself or have your vehicle serviced at a location other than an
Authorized Mazda Dealer, Mazda requires that all fluids, parts and materials must meet Mazda
standards for durability and performance as described in this manual.
Claims against the warranty resulting from lack of maintenance, as opposed to defective
materials or authorized Mazda workmanship, will not be honored.
8-2
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page335
Friday, July 10 2015 5:27 PM
Black plate (335,1)
Maintenance and Care
Introduction
Any auto repair shop using parts equivalent to your Mazda's original equipment may
perform maintenance. But we recommend that it always be done by an Authorized
Mazda Dealer using genuine Mazda parts.
8-3
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page336
Friday, July 10 2015 5:27 PM
Black plate (336,1)
Maintenance and Care
Scheduled Maintenance
Scheduled Maintenance
NOTE
After the prescribed period, continue to follow the described maintenance at the recommended
intervals.
8-4
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page337
Friday, July 10 2015 5:27 PM
Black plate (337,1)
Maintenance and Care
Scheduled Maintenance
qSchedule
Maintenance Interval
Number of months or kilometers (miles), whichever comes first
Months
4
8 12 16 20 24 28 32 36 40 44
×1000 km
8 16 24 32 40 48 56 64 72 80 88
×1000 miles
5 10 15 20 25 30 35 40 45 50 55
48
96
60
ENGINE
Engine valve clearance
Audibly inspect every 120,000 km (75,000 miles), if noisy,
adjust
Drive belts
Engine oil & filter
COOLING SYSTEM
R
Engine coolant*1
Engine coolant level
FUEL SYSTEM
Air filter
R
R
R
R
I
I
I
I
I
Tire (Rotation)
Tire inflation pressure and tire wear
R
R
R
R
I
R
I
I
I
I
I
I
I
Replace every 120,000 km (75,000 miles)
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Rotate every 8,000 km (5,000 miles)
I
I
I
I
I
I
I
I
I
I
I
I
Steering operation and linkages
Power steering fluid level
Front and rear suspension, ball joints and wheel
bearing axial play
R
I
Brake lines, hoses and connections
Brake fluid level
Disc brakes
I
R
Replace at first 192,000 km (120,000 miles) or 10 years ; after
that, every 96,000 km (60,000 miles) or 5 years
I
I
I
I
I
I
I
I
I
I
I
I
Fuel lines and hoses*2
Hoses and tubes for emission*2
IGNITION SYSTEM
Spark plugs
ELECTRICAL SYSTEM
Function of all lights
CHASSIS and BODY
R
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Driveshaft dust boots
I
I
Bolts and nuts on chassis and body
T
T
Exhaust system and heat shields
All locks and hinges
Washer fluid level
L
I
Inspect every 72,000 km (45,000 miles) or 5 years
L
L
L
L
L
L
L
L
L
L
I
I
I
I
I
I
I
I
I
I
L
I
8-5
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page338
Friday, July 10 2015 5:27 PM
Black plate (338,1)
Maintenance and Care
Scheduled Maintenance
Maintenance Interval
Number of months or kilometers (miles), whichever comes first
Months
4
8 12 16 20 24 28 32 36 40 44
×1000 km
8 16 24 32 40 48 56 64 72 80 88
×1000 miles
5 10 15 20 25 30 35 40 45 50 55
AIR CONDITIONER SYSTEM
Cabin air filter
48
96
60
Replace every 40,000 km (25,000 miles) or 2 years
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
L: Lubricate
T: Tighten
Remarks:
*1 Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may
cause serious damage to the engine and cooling system.
*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will not
void your emissions warranties. However, Mazda recommends that all maintenance services be performed at
the recommended time or mileage/kilometer period to ensure long-term reliability.
8-6
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page339
Friday, July 10 2015 5:27 PM
Black plate (339,1)
Maintenance and Care
Owner Maintenance
Owner Maintenance Schedule
The owner or a qualified service technician should make these vehicle inspections at the
indicated intervals to ensure safe and dependable operation.
Bring any problem to the attention of an Authorized Mazda Dealer or qualified service
technician as soon as possible.
qWhen Refueling
l
l
l
l
Brake and clutch fluid level (page 8-15)
Engine coolant level (page 8-13)
Engine oil level (page 8-12)
Washer fluid level (page 8-17)
qAt Least Monthly
Tire inflation pressures (page 8-28)
qAt Least Twice a Year (For Example, Every Spring and Fall)
Automatic transaxle fluid level (page 8-16)
Power steering fluid level (page 8-15)
You can do the following scheduled maintenance items if you have some mechanical
ability and a few basic tools and if you closely follow the directions in this manual.
l Engine coolant (page 8-13)
l Engine oil (page 8-11)
l
l
8-7
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page340
Friday, July 10 2015 5:27 PM
Black plate (340,1)
Maintenance and Care
Owner Maintenance
Owner Maintenance Precautions
Improper or incomplete service may result in problems. This section gives instructions only
for items that are easy to perform.
As explained in the Introduction (page 8-2), several procedures can be done only by a
qualified service technician with special tools.
Improper owner maintenance during the warranty period may affect warranty coverage.
Refer to Introduction (page 8-2) for owner's responsibility in protecting your investment.
For details, read the separate Mazda Warranty statement provided with the vehicle. If you
are unsure about any servicing or maintenance procedure, have it done by an Authorized
Mazda Dealer.
There are strict environmental laws regarding the disposal of waste oil and fluids. Please
dispose of your waste properly and with due regard to the environment.
We recommend that you entrust the oil and fluid changes of your vehicle to an Authorized
Mazda Dealer.
8-8
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page341
Friday, July 10 2015 5:27 PM
Black plate (341,1)
Maintenance and Care
Owner Maintenance
WARNING
Do not perform maintenance work if you lack sufficient knowledge and experience or
the proper tools and equipment to do the work. Have maintenance work done by a
qualified technician:
Performing maintenance work on a vehicle is dangerous if not done properly. You
can be seriously injured while performing some maintenance procedures.
If you must run the engine while working under the hood, make certain that you
remove all jewelry (especially rings, bracelets, watches, and necklaces) and all
neckties, scarves, and similar loose clothing before getting near the engine or cooling
fan which may turn on unexpectedly:
Working under the hood with the engine running is dangerous. It becomes even
more dangerous when you wear jewelry or loose clothing.
Either can become entangled in moving parts and result in injury.
Switch the ignition to off and make sure the fan is not running before attempting to
work near the cooling fan:
Working near the cooling fan when it is running is dangerous. The fan could
continue running indefinitely even if the engine has stopped and the engine
compartment temperature is high. You could be hit by the fan and seriously injured.
Do not leave items in the engine compartment:
After you have finished checking or doing servicing in the engine compartment, do
not forget and leave items such as tools or rags in the engine compartment.
Tools or other items left in the engine compartment could cause engine damage or a
fire leading to an unexpected accident.
8-9
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page342
Friday, July 10 2015 5:27 PM
Black plate (342,1)
Maintenance and Care
Owner Maintenance
Engine Compartment Overview
Automatic transaxle fluid-level dipstick
(Only for automatic transaxle)
Engine oil-filler cap
Engine coolant reservoir
Battery
Engine oil dipstick
Brake/Clutch fluid reservoir
Cooling system cap
Power steering fluid reservoir
Windscreen washer fluid reservoir
8-10
Form No.8FA7-EA-15G
Fuse block
Mazda5_8FA7-EA-15G_Edition2 Page343
Friday, July 10 2015 5:27 PM
Black plate (343,1)
Maintenance and Care
Owner Maintenance
Engine Oil
NOTE
Changing the engine oil should be performed
by an Authorized Mazda Dealer.
Refer to Introduction (page 8-2) for owner's
responsibility in protecting your investment.
qRecommended Oil
Only use SAE 0W-20 oil “Certified For
Gasoline Engines” by the American
Petroleum Institute (API).
Oil with this trademark symbol conforms
to the current engine and emission system
protection standards and fuel economy
requirements of the International
Lubricant Standardization and Approval
Committee (ILSAC), comprised of U.S.
and Japanese automobile manufacturers.
U.S.A. and CANADA
Use SAE 0W-20 engine oil.
Mazda Genuine Oil is used in your Mazda
vehicle. Mazda Genuine 0W-20 Oil is
required to achieve optimum fuel
economy.
–40 –30 –20 –10
–40 –20
0
20
0
10
40
20
60
30
40
80 100
For maintenance service, Mazda
recommends Mazda Genuine Parts and
Castrol® (U.S.A. only).
Except U.S.A. and CANADA
Use SAE 0W-20 engine oil.
Oil container labels provide important
information.
A chief contribution this type of oil makes
to fuel economy is reducing the amount of
fuel necessary to overcome engine
friction.
For maintenance service, Mazda
recommends Mazda Genuine Parts and
Castrol® (Mexico only).
(ILSAC)
8-11
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page344
Friday, July 10 2015 5:27 PM
Black plate (344,1)
Maintenance and Care
Owner Maintenance
4. Pull out the dipstick, wipe it clean, and
reinsert it fully.
Full
OK
Low
(ILSAC)
(Mexico)
Use SAE 0W-20 engine oil. If SAE 0W20 engine oil is not available, use SAE
5W-20, 5W-30 engine oil.
The quality designation SM, or ILSAC
must be on the label.
5. Pull it out again and examine the level.
The level is normal if it is between
Low and Full.
If it is near or below Low, add enough
oil to bring the level to Full.
CAUTION
–40 –30 –20 –10
–40 –20
0
20
0
10
40
20
60
30
40
80 100
qInspecting Engine Oil Level
1. Be sure the vehicle is on a level
surface.
2. Warm up the engine to normal
operating temperature.
3. Turn it off and wait at least 5 minutes
for the oil to return to the oil pan.
8-12
Form No.8FA7-EA-15G
Do not add engine oil over Full. This
may cause engine damage.
6. Make sure the O-ring on the dipstick is
positioned properly before reinserting
the dipstick.
Mazda5_8FA7-EA-15G_Edition2 Page345
Friday, July 10 2015 5:27 PM
Black plate (345,1)
Maintenance and Care
Owner Maintenance
Engine Coolant
qInspecting Coolant Level
WARNING
Do not use a match or live flame in the
engine compartment. DO NOT ADD
COOLANT WHEN THE ENGINE IS HOT:
A hot engine is dangerous. If the
engine has been running, parts of the
engine compartment can become
very hot. You could be burned.
Carefully inspect the engine coolant
in the coolant reservoir, but do not
open it.
Switch the ignition to off and
make sure the fan is not running before
attempting to work near the cooling
fan:
Working near the cooling fan when it
is running is dangerous. The fan
could continue running indefinitely
even if the engine has stopped and
the engine compartment temperature
is high. You could be hit by the fan
and seriously injured.
Do not remove either cooling
system cap when the engine and
radiator are hot:
When the engine and radiator are
hot, scalding coolant and steam may
shoot out under pressure and cause
serious injury.
Inspect the antifreeze protection and
coolant level in the coolant reservoir at
least once a year―at the beginning of the
winter season―and before traveling
where temperatures may drop below
freezing.
Inspect the condition and connections of
all cooling system and heater hoses.
Replace any that are swollen or
deteriorated.
The coolant should be at full in the
radiator and between the F and L marks
on the coolant reservoir when the engine
is cool.
If it is at or near L, add enough coolant to
the coolant reservoir to provide freezing
and corrosion protection and to bring the
level to F.
Securely tighten the coolant reservoir tank
cap after adding coolant.
CAUTION
Ø Radiator coolant will damage
paint.
Rinse it off quickly if spilled.
NOTE
Changing the coolant should be done by an
Authorized Mazda Dealer.
8-13
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page346
Friday, July 10 2015 5:27 PM
Black plate (346,1)
Maintenance and Care
Owner Maintenance
Ø Use only soft (demineralized)
water in the coolant mixture.
Water that contains minerals will
cut down on the coolant's
effectiveness.
Ø Do not add only water. Always
add a proper coolant mixture.
Ø The engine has aluminum parts
and must be protected by an
ethylene-glycol-based coolant to
prevent corrosion and freezing.
Ø DO NOT USE coolants Containing
Alcohol, methanol, Borate or
Silicate.
These coolants could damage the
cooling system.
Ø DO NOT MIX alcohol or methanol
with the coolant. This could
damage the cooling system.
Ø Do not use a solution that
contains more than 60%
antifreeze.
This would reduce effectiveness.
Ø If the “FL22” mark is shown on or
near the cooling system cap, use of
FL-22 is recommended when
replacing engine coolant. Using
engine coolant other than FL-22
may cause serious damage to the
engine and cooling system.
8-14
Form No.8FA7-EA-15G
If the coolant reservoir is empty or new
coolant is required frequently, consult an
Authorized Mazda Dealer.
Mazda5_8FA7-EA-15G_Edition2 Page347
Friday, July 10 2015 5:27 PM
Black plate (347,1)
Maintenance and Care
Owner Maintenance
Brake/Clutch Fluid
qInspecting Brake/Clutch Fluid Level
WARNING
If the brake/clutch fluid level is low,
have the brakes inspected:
A low brake/clutch fluid level is
dangerous.
A low level could indicate brake
lining wear or a brake system leak
which could cause the brakes to fail
and lead to an accident.
The brakes and clutch draw fluid from the
same reservoir.
Inspect the fluid level in the reservoir
regularly. It should be kept between the
MAX and MIN lines.
The level normally drops with
accumulated distance, a condition
associated with wear of brake and clutch
linings. If it is excessively low, have the
brake/clutch system inspected by an
Authorized Mazda Dealer.
Power Steering Fluid
qInspecting Power Steering Fluid
Level
CAUTION
To avoid damage to the power
steering pump, do not operate the
vehicle for long periods when the
power steering fluid level is low.
Inspect the fluid level in the reservoir at
each engine oil change with the engine off
and cold.
The level must be kept between MIN and
MAX.
Visually examine the lines and hoses for
leaks and damage.
If the fluid decreases significantly or the
fluid level is around MIN or lower than
MIN, consult an Authorized Mazda
Dealer to have the vehicle inspected.
8-15
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page348
Friday, July 10 2015 5:27 PM
Black plate (348,1)
Maintenance and Care
Owner Maintenance
Automatic Transaxle Fluid
(ATF) í
qInspecting Automatic Transaxle
Fluid Level
The automatic transaxle fluid level should
be inspected regularly. Measure it as
described below.
CAUTION
Always check the automatic
transaxle fluid level according to the
following procedure. If the procedure
is not done correctly, the automatic
transaxle fluid level cannot be
measured accurately which could
lead to automatic transaxle damage.
1. Park on a level surface and set the
parking brake firmly.
2. Make sure there is no ATF leakage
from the ATF hose or the housing.
3. Shift the shift lever to the park position
(P), start the engine and warm it up.
CAUTION
Do not shift the shift lever while the
engine is warming up. If the ATF level
is extremely low, the automatic
transaxle could be damaged.
4. While the engine is still idling, pull out
the dipstick and wipe it clean, and then
reinsert it.
5. Check the ATF level. If the ATF level
does not reach 5 mm (0.2 in) from the
end of the dipstick, consult an
Authorized Mazda Dealer to have the
vehicle inspected.
8-16
í
Some models.
Form No.8FA7-EA-15G
CAUTION
If there is no ATF adhering to the
dipstick even after the engine has
been warmed up, do not drive the
vehicle. Otherwise, the automatic
transaxle could be damaged.
6. With the brake pedal depressed, shift
the shift lever from the park position
(P) to drive position (D) at intervals of
several seconds, and then shift to the
park position (P) again.
7. Drive 5 km (4 mile) or more in a city.
8. Park on a level surface, shift the shift
lever to the park position (P) and set
the parking brake firmly.
9. While the engine is still idling, pull out
the dipstick and wipe it clean, and then
reinsert it.
10. Check the ATF level. The proper fluid
level indicated on the dipstick should
be as follows.
Full
OK
Low
Mazda5_8FA7-EA-15G_Edition2 Page349
Friday, July 10 2015 5:27 PM
Black plate (349,1)
Maintenance and Care
Owner Maintenance
CAUTION
Ø Use the cold scale only as a
reference.
Ø If outside temperature is lower
than about 20 °C (70 °F), start the
engine and inspect the fluid level
after the engine reaches operating
temperature.
Ø If the vehicle has been driven for
an extended period at high speeds
or in city traffic in hot weather,
inspect the level only after
stopping the engine and allowing
the fluid to cool for 30 minutes.
If the ATF level does not reach the
appropriate level, consult an Authorized
Mazda Dealer to have the vehicle
inspected.
NOTE
Inspect the fluid on both sides of the dipstick in
a well lit area for an accurate reading.
Washer Fluid
qInspecting Washer Fluid Level
WARNING
Use only windshield washer fluid or
plain water in the reservoir:
Using radiator antifreeze as washer
fluid is dangerous. If sprayed on the
windshield, it will dirty the
windshield, affect your visibility, and
could result in an accident.
Using Washer Fluid Without Anti-freeze
Protection in Cold Weather:
Operating your vehicle in
temperatures below 4 degrees C (40
degrees F) using washer fluid without
anti-freeze protection is dangerous
as it could cause impaired windshield
vision and result in an accident. In
cold weather, always use washer
fluid with anti-freeze protection.
NOTE
State or local regulations may restrict the use
of volatile organic compounds (VOCs), which
are commonly used as anti-freeze agents in
washer fluid. A washer fluid with limited VOC
content should be used only if it provides
adequate freeze resistance for all regions and
climates in which the vehicle will be operated.
8-17
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page350
Friday, July 10 2015 5:27 PM
Black plate (350,1)
Maintenance and Care
Owner Maintenance
Inspect fluid level in the washer fluid
reservoir; add fluid if necessary.
Body Lubrication
All moving points of the body, such as
door and hood hinges and locks, should
be lubricated each time the engine oil is
changed. Use a nonfreezing lubricant on
locks during cold weather.
Make sure the hood's secondary latch
keeps the hood from opening when the
primary latch is released.
To inspect the washer fluid level in the
front reservoir, pull off the cap. Then,
holding your thumb over the hole in the
center of the cap, lift it straight up. The
fluid level can be seen from the fluid
column in the pipe. Add fluid if necessary.
Use plain water if washer fluid is
unavailable. But use only washer fluid in
cold weather to prevent it from freezing.
NOTE
Front and rear washer fluid is supplied from
the same reservoir.
8-18
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page351
Friday, July 10 2015 5:27 PM
Black plate (351,1)
Maintenance and Care
Owner Maintenance
Wiper Blades
CAUTION
Ø Hot waxes applied by automatic
car washers have been known to
affect the wiper's ability to clean
windows.
Ø To prevent damage to the wiper
blades, do not use gasoline,
kerosene, paint thinner, or other
solvents on or near them.
Ø When the wiper lever is in the
AUTO position and the ignition is
switched ON, the wipers may
move automatically in the
following cases:
Ø If the windshield above the rain
sensor is touched.
Ø If the windshield above the rain
sensor is wiped with a cloth.
Ø If the windshield is struck with
a hand or other object.
Ø If the rain sensor is struck with
a hand or other object from
inside the vehicle.
Be careful not to pinch hands or
fingers as it may cause injury, or
damage the wipers. When
washing or servicing your Mazda,
make sure the wiper lever is in the
OFF position.
Contamination of either the windshield or
the blades with foreign matter can reduce
wiper effectiveness. Common sources are
insects, tree sap, and hot wax treatments
used by some commercial car washes.
If the blades are not wiping properly,
clean the window and blades with a good
cleaner or mild detergent; then rinse
thoroughly with clean water. Repeat if
necessary.
qReplacing Windshield Wiper Blades
When the wipers no longer clean well, the
blades are probably worn or cracked.
Replace them.
CAUTION
To prevent damage to the wiper arms
and other components, don't try to
sweep the wiper arm by hand.
NOTE
When raising both windshield wiper arms,
raise the driver's side wiper arm first. When
lowering the wiper arms, slowly lower the
wiper arm from the passenger's side first while
supporting it with your hand. Forcefully
lowering the wiper arms could damage the
wiper arm and blade, and may scratch or
crack the windshield.
1. Raise the wiper arm and turn the blade
assembly to expose the plastic locking
clip.
Slide the assembly downward; then lift
it off the arm.
Plastic locking clip
CAUTION
To prevent damage to the windshield
let the wiper arm down easily, don't
let it slap down on the windshield.
8-19
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page352
Friday, July 10 2015 5:27 PM
Black plate (352,1)
Maintenance and Care
Owner Maintenance
2. Hold the end of the rubber and pull
until the tabs are free of the metal
support.
Metal support
Tab
3. Remove the metal stiffeners from each
blade rubber and install them in the
new blade.
CAUTION
Ø Don't bend or discard the
stiffeners. You need to use them
again.
Ø If the metal stiffeners are
switched, the blade's wiping
efficiency could be reduced.
So don't use the driver's side metal
stiffeners on the passenger's side,
or vice versa.
Ø Be sure to reinstall the metal
stiffeners in the new blade rubber
so that the curve is the same as it
was in the old blade rubber.
4. Carefully insert the new blade rubber.
Then install the blade assembly in the
reverse order of removal.
NOTE
Install the blade so that the tabs are toward the
bottom of the wiper arm.
qReplacing Rear Window Wiper
Blade
When the wiper no longer cleans well, the
blade is probably worn or cracked.
Replace it.
8-20
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page353
Friday, July 10 2015 5:27 PM
Black plate (353,1)
Maintenance and Care
Owner Maintenance
CAUTION
3. Pull down the blade rubber and slide it
out of the blade holder.
To prevent damage to the wiper arm
and other components, don't try to
sweep the wiper arm by hand.
1. Remove the cover and raise the wiper
arm.
4. Remove the metal stiffeners from each
blade rubber and install them in the
new blade.
2. Firmly rotate the wiper blade to the
right until it unlocks, then remove the
blade.
CAUTION
Don't bend or discard the stiffeners.
You need to use them again.
CAUTION
To prevent damage to the rear
window let the wiper arm down
easily, don't let it slap down on the
rear window.
8-21
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page354
Friday, July 10 2015 5:27 PM
Maintenance and Care
Owner Maintenance
5. Carefully insert the new blade rubber.
Then install the blade assembly in the
reverse order of removal.
8-22
Form No.8FA7-EA-15G
Black plate (354,1)
Mazda5_8FA7-EA-15G_Edition2 Page355
Friday, July 10 2015 5:27 PM
Black plate (355,1)
Maintenance and Care
Owner Maintenance
Battery
WARNING
Wash hands after handling the battery and related accessories:
Battery posts, terminals and related accessories contain lead and lead compounds,
chemicals known to the State of California to cause cancer and reproductive harm.
Read the following precautions carefully before using the battery or inspecting
to ensure safe and correct handling:
Always wear eye protection when working near the battery:
Working without eye protection is dangerous. Battery fluid contains SULFURIC ACID
which could cause blindness if splashed into your eyes. Also, hydrogen gas produced
during normal battery operation, could ignite and cause the battery to explode.
Wear eye protection and protective gloves to prevent contact with battery
fluid:
Spilled battery fluid is dangerous.
Battery fluid contains SULFURIC ACID which could cause serious injuries if it gets in
eyes, or on the skin or clothing. If this happens, immediately flush your eyes with
water for 15 minutes or wash your skin thoroughly and get medical attention.
Always keep batteries out of the reach of children:
Allowing children to play near batteries is dangerous. Battery fluid could cause
serious injuries if it gets in the eyes or on the skin.
Keep flames and sparks away from open battery cells and do not allow metal
tools to contact the positive ( ) or negative ( ) terminal of the battery when
working near a battery. Do not allow the positive ( ) terminal to contact the vehicle
body:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries. Keep all flames including
cigarettes and sparks away from open battery cells.
8-23
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page356
Friday, July 10 2015 5:27 PM
Black plate (356,1)
Maintenance and Care
Owner Maintenance
Keep all flames, including cigarettes, and sparks away from open battery cells:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries.
8-24
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page357
Friday, July 10 2015 5:27 PM
Black plate (357,1)
Maintenance and Care
Owner Maintenance
NOTE
Remove the battery cover before performing
battery maintenance.
2 Detach the clip facing the vehicle
interior first and pull it outward
with your finger approx. 4 mm (0.2
in). Then, lift the cover slightly to
clear the lock.
Clip
CAUTION
Ø Do not use a tool which applies
excessive force such as a
screwdriver or pliers.
If excessive force is applied to the
clips, they could be damaged.
To prevent damaging the battery
cover, remove/install the battery
cover using the following
procedure.
Removing battery cover
1 Detach the clip facing the side of
the vehicle first and pull it outward
with your finger approx. 4 mm (0.2
in). Then, lift the cover slightly to
clear the lock.
Clip
8-25
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page358
Friday, July 10 2015 5:27 PM
Black plate (358,1)
Maintenance and Care
Owner Maintenance
3 Pull out the battery cover being
careful not to allow it to contact
the cowl grille.
Battery cover
Cowl grille
Installing battery cover
1 Being careful not to contact the
cowl grille, insert the tabs on the
one end of the battery cover into
the holes of the battery tray and
engage the tabs.
Cowl grille
Tabs
2 Attach the clips on both sides of
the battery cover.
Clip
qBattery Maintenance
Holes
To get the best service from a battery:
l Keep it securely mounted.
l Keep the top clean and dry.
l Keep terminals and connections clean,
tight, and coated with petroleum jelly
or terminal grease.
l Rinse off spilled electrolyte
immediately with a solution of water
and baking soda.
l If the vehicle will not be used for an
extended time, disconnect the battery
cables.
8-26
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page359
Friday, July 10 2015 5:27 PM
Black plate (359,1)
Maintenance and Care
Owner Maintenance
qBattery Replacement
Contact an Authorized Mazda Dealer for a
battery replacement purchase.
Tires
For reasons of proper performance, safety,
and better fuel economy, always maintain
recommended tire inflation pressures and
stay within the recommended load limits
and weight distribution.
WARNING
Using Different Tire Types:
Driving your vehicle with different
types of tires is dangerous. It could
cause poor handling and poor
braking; leading to loss of control.
Except for the limited use of the
temporary spare tire, use only the
same type tires (radial, bias-belted,
bias-type) on all four wheels.
Using Wrong-Sized Tires:
Using any other tire size than what is
specified for your Mazda (page 10-6)
is dangerous. It could seriously affect
ride, handling, ground clearance, tire
clearance, and speedometer
calibration. This could cause you to
have an accident. Use only tires that
are the correct size specified for your
Mazda.
8-27
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page360
Friday, July 10 2015 5:27 PM
Black plate (360,1)
Maintenance and Care
Owner Maintenance
qTire Inflation Pressure
WARNING
Always inflate the tires to the correct
pressure:
Overinflation or underinflation of
tires is dangerous. Adverse handling
or unexpected tire failure could result
in a serious accident.
Refer to Tires on page 10-6.
Use only a Mazda-genuine tire valve
cap:
Use of a non-genuine part is
dangerous as the correct tire air
pressure cannot be maintained if the
tire valve becomes damaged. If the
vehicle is driven under this condition,
the tire air pressure will decrease
which could result in a serious
accident. Do not use any part for the
tire valve cap that is not a Mazdagenuine part.
The Tire Pressure Monitoring System í
does not alleviate the need to check the
tire condition every day, including
whether the tires all look inflated properly.
Inspect all tire pressure monthly
(including the spare) when the tires are
cold. Maintain recommended pressures
for the best ride, handling, and minimum
tire wear.
When checking the tire pressures, use of a
digital tire pressure gauge is
recommended.
Refer to the specification charts (page
10-6).
8-28
í
Some models.
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page361
Friday, July 10 2015 5:27 PM
Black plate (361,1)
Maintenance and Care
Owner Maintenance
NOTE
l
l
l
l
Always check tire pressure when tires are
cold.
Warm tires normally exceed recommended
pressures. Don't release air from warm tires
to adjust the pressure.
Underinflation can cause reduced fuel
economy, uneven and accelerated tire wear,
and poor sealing of the tire bead, which
will deform the wheel and cause separation
of tire from rim.
Overinflation can produce a harsh ride,
uneven and accelerated tire wear, and a
greater possibility of damage from road
hazards.
Keep your tire pressure at the correct
levels. If one frequently needs inflating,
have it inspected.
qTire Rotation
WARNING
Rotate tires periodically:
Irregular tire wear is dangerous. To
equalize tread wear for maintaining
good performance in handling and
braking, rotate the tires according to
the scheduled maintenance charts.
Refer to Scheduled Maintenance on
page 8-4.
During rotation, inspect them for correct
balance.
Forward
Do not include (TEMPORARY USE ONLY)
spare tire in rotation.
Also, inspect them for uneven wear and
damage. Abnormal wear is usually caused
by one or a combination of the following:
l
l
l
l
Incorrect tire pressure
Improper wheel alignment
Out-of-balance wheel
Severe braking
After rotation, inflate all tire pressures to
specification (page 10-6) and inspect the
lug nuts for tightness.
CAUTION
Rotate unidirectional tires and radial
tires that have an asymmetrical tread
pattern or studs only from front to
rear, not from side to side. Tire
performance will be reduced if
rotated from side to side.
8-29
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page362
Friday, July 10 2015 5:27 PM
Black plate (362,1)
Maintenance and Care
Owner Maintenance
qReplacing a Tire
WARNING
Always use tires that are in good
condition:
Driving with worn tires is dangerous.
Reduced braking, steering, and
traction could result in an accident.
Replace all four tires at the same time:
Replacing just one tire is dangerous.
It could cause poor handling and
poor braking resulting in loss of
vehicle control. Mazda strongly
recommends that you replace all four
tires at the same time.
CAUTION
(With Tire Pressure Monitoring
System)
When replacing/repairing the tires or
wheels or both, have the work done
by an Authorized Mazda Dealer, or
the tire pressure sensors may be
damaged.
NOTE
(With Tire Pressure Monitoring System)
l When tires with steel wire reinforcement in
the sidewalls are used, the system may not
function correctly even with a genuine
wheel.
Refer to System Error Activation on page
5-32.
l Be sure to install the tire pressure sensors
whenever tires or wheels are replaced.
Refer to Tires and Wheels on page 5-32.
If a tire wears evenly, a wear indicator
will appear as a solid band across the
tread.
Replace the tire when this happens.
Tread wear indicator
New tread
Worn tread
You should replace the tire before the
band crosses the entire tread.
NOTE
Tires degrade over time, even when they are
not being used on the road. It is recommended
that tires generally be replaced when they are
6 years or older. Heat caused by hot climates
or frequent high loading conditions can
accelerate the aging process. You should
replace the spare tire when you replace the
other road tires due to the aging of the spare
tire. The period in which the tire was
manufactured (both week and year) is
indicated by a 4-digit number.
Refer to Tire Labeling on page 9-23.
qTemporary Spare Tire
Inspect the temporary spare tire at least
monthly to make sure it's properly inflated
and stored.
NOTE
The temporary spare tire condition gradually
deteriorates even if it has not been used.
8-30
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page363
Friday, July 10 2015 5:27 PM
Black plate (363,1)
Maintenance and Care
Owner Maintenance
The temporary spare tire is easier to
handle because of its construction which
is lighter and smaller than a conventional
tire. This tire should be used only for an
emergency and only for a short distance.
Use the temporary spare tire only until the
conventional tire is repaired, which should
be as soon as possible.
Maintain its pressure at 420 kPa (4.2
kgf/cm2 or bar, 60 psi).
CAUTION
Ø Do not use your temporary spare
tire rim with a snow tire or a
conventional tire. Neither will
properly fit and could damage
both tire and rim.
Ø The temporary spare tire has a
tread life of less than 5,000 km
(3,000 miles). The tread life may
be shorter depending on driving
conditions.
Ø The temporary spare tire is for
limited use, however, if the tread
wear solid-band indicator
appears, replace the tire with the
same type of temporary spare
(page 8-30).
NOTE
Tires degrade over time, even when they are
not being used on the road. It is recommended
that tires generally be replaced when they are
6 years or older. Heat caused by hot climates
or frequent high loading conditions can
accelerate the aging process. You should
replace the spare tire when you replace the
other road tires due to the aging of the spare
tire. The period in which the tire was
manufactured (both week and year) is
indicated by a 4-digit number.
Refer to Tire Labeling on page 9-23.
qReplacing a Wheel
WARNING
Always use wheels of the correct size
on your vehicle:
Using a wrong-sized wheel is
dangerous. Braking and handling
could be affected, leading to loss of
control and an accident.
CAUTION
Ø A wrong-sized wheel may
adversely affect:
Ø Tire fit
Ø Wheel and bearing life
Ø Ground clearance
Ø Snow-chain clearance
Ø Speedometer calibration
Ø Headlight aim
Ø Bumper height
Ø Tire Pressure Monitoring
System
Ø (With Tire Pressure Monitoring
System)
Ø When replacing/repairing the
tires or wheels or both, have the
work done by an Authorized
Mazda Dealer, or the tire
pressure sensors may be
damaged.
Ø The wheels equipped on your
Mazda are specially designed
for installation of the tire
pressure sensors. Do not use
non-genuine wheels, otherwise
it may not be possible to install
the tire pressure sensors.
8-31
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page364
Friday, July 10 2015 5:27 PM
Maintenance and Care
Owner Maintenance
NOTE
l
l
l
Be sure to install the tire pressure sensors
whenever tires or wheels are replaced.
Refer to Tires and Wheels on page 5-32.
When replacing a wheel, make sure the new
one is the same as the original factory
wheel in diameter, rim width, and offset
(inset/outset).
For details, contact an Authorized Mazda
Dealer.
Proper tire balancing provides the best
riding comfort and helps reduce tread
wear. Out-of-balance tires can cause
vibration and uneven wear, such as
cupping and flat spots.
8-32
Form No.8FA7-EA-15G
Black plate (364,1)
Mazda5_8FA7-EA-15G_Edition2 Page365
Friday, July 10 2015 5:27 PM
Black plate (365,1)
MEMO
8-33
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page366
Friday, July 10 2015 5:27 PM
Black plate (366,1)
Maintenance and Care
Owner Maintenance
Light Bulbs
Overhead light/Map lights (Front)
Side turn signal lights
Fog lights
Headlights (High beam)
Headlights (Low beam)
Front turn signal lights/Front side-marker
lights/Parking lights
Overhead light (Rear)
High-mount brake light
License plate lights
Reverse lights
Luggage compartment light
Rear turn signal lights
Brake lights/Taillights/Rear sidemarker lights
Some models.
8-34
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page367
Friday, July 10 2015 5:27 PM
Black plate (367,1)
Maintenance and Care
Owner Maintenance
WARNING
Do not replace the xenon fusion bulbs
yourself:
Replacing the xenon fusion bulbs
yourself is dangerous. Because the
xenon fusion bulbs require high
voltage, you could receive an electric
shock if the bulbs are handled
incorrectly. Consult an Authorized
Mazda Dealer when the replacement
is necessary.
Never touch the glass portion of a
halogen bulb with your bare hands and
always wear eye protection when
handling or working around the bulbs:
When a halogen bulb breaks, it is
dangerous. These bulbs contain
pressurized gas. If one is broken, it
will explode and serious injuries
could be caused by the flying glass.
If the glass portion is touched with
bare hands, body oil could cause the
bulb to overheat and explode when
lit.
qReplacing Exterior Light Bulbs
Headlight bulbs
High-beam bulbs
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Lift the hood.
3. Remove the hood wire from the guide.
Wire
Guide
4. Disconnect the electrical connector
from the bulb by pressing the tab on
the connector with your finger and
pulling the connector.
Always keep halogen bulbs out of the
reach of children:
Playing with a halogen bulb is
dangerous. Serious injuries could be
caused by dropping a halogen bulb
or breaking it some other way.
CAUTION
When removing the lens or lamp unit
using a flathead screwdriver, make
sure that the flathead screwdriver
does not contact the interior
terminal. If the flathead screwdriver
contacts the terminal, a short circuit
may occur.
8-35
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page368
Friday, July 10 2015 5:27 PM
Black plate (368,1)
Maintenance and Care
Owner Maintenance
5. Turn the bulb assembly
counterclockwise and remove it.
Carefully remove the bulb from its
socket in the reflector by gently pulling
it straight backward out of the socket.
6. Install the new bulb in the reverse order
of the removal procedure.
NOTE
l
l
l
To replace the bulb, contact an Authorized
Mazda Dealer
If the halogen bulb is accidentally touched,
it should be cleaned with rubbing alcohol
before being used.
Use the protective cover and carton of the
replacement bulb to dispose of the old bulb
promptly out of the reach of children.
3. Disconnect the electrical connector
from the bulb by pressing the tab on
the connector with your finger and
pulling the connector.
4. Turn the bulb assembly
counterclockwise and remove it.
Carefully remove the bulb from its
socket in the reflector by gently pulling
it straight backward out of the socket.
Low-beam bulbs
(Xenon fusion bulb)
You cannot replace the low beam bulbs by
yourself. The bulbs must be replaced at an
Authorized Mazda Dealer.
(Halogen bulb)
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Lift the hood.
8-36
Form No.8FA7-EA-15G
5. Install the new bulb in the reverse order
of the removal procedure.
Mazda5_8FA7-EA-15G_Edition2 Page369
Friday, July 10 2015 5:27 PM
Black plate (369,1)
Maintenance and Care
Owner Maintenance
NOTE
l
l
l
To replace the bulb, contact an Authorized
Mazda Dealer
If the halogen bulb is accidentally touched,
it should be cleaned with rubbing alcohol
before being used.
Use the protective cover and carton of the
replacement bulb to dispose of the old bulb
promptly out of the reach of children.
3. Disconnect the electrical connector
from the bulb by pressing the tab on
the connector with your finger and
pulling the connector.
Fog light bulbs í
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Turn the screw counterclockwise and
remove it, then partially peel back the
mudguard.
4. Turn the bulb assembly
counterclockwise and remove it.
Carefully remove the bulb from its
socket in the reflector by gently pulling
it straight backward out of the socket.
5. Install the new bulb in the reverse order
of the removal procedure.
í
Some models.
Form No.8FA7-EA-15G
8-37
Mazda5_8FA7-EA-15G_Edition2 Page370
Friday, July 10 2015 5:27 PM
Black plate (370,1)
Maintenance and Care
Owner Maintenance
NOTE
l
l
l
To replace the bulb, contact an Authorized
Mazda Dealer
If the halogen bulb is accidentally touched,
it should be cleaned with rubbing alcohol
before being used.
Use the protective cover and carton of the
replacement bulb to dispose of the old bulb
promptly out of the reach of children.
Brake lights/Taillights/Rear sidemarker lights, Rear turn signal lights
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Turn the bolts counterclockwise and
remove them.
Front turn signal lights/Front sidemarker lights/Parking lights
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Lift the hood.
3. Turn the socket and bulb assembly
counterclockwise and remove it.
4. Remove the bulb by pressing it in
slightly and turning it
counterclockwise.
3. Pull the upper part of the cover around
the clip outward to detach the clip.
Clip
5. Install the new bulb in the reverse order
of the removal procedure.
Side turn signal lights í
The LED bulb cannot be replaced as a
single unit because it is an integrated unit.
The LED bulb has to be replaced with the
unit. We recommend an Authorized
Mazda Dealer when the replacement is
necessary.
8-38
í
Some models.
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page371
Friday, July 10 2015 5:27 PM
Black plate (371,1)
Maintenance and Care
Owner Maintenance
4. Pull the unit rearward to remove it.
Rear turn signal lights
5. Turn the socket and bulb assembly
counterclockwise and remove it.
7. Install the new bulb in the reverse order
of the removal procedure.
6. Disconnect the bulb from the socket.
NOTE
Brake lights/Taillights/Rear sidemarker lights
To install the unit, insert the hooks (2
locations) on the unit side into the clips on the
vehicle side, and install the unit.
Clip
Hook
Reverse lights
1. Make sure the ignition is switched off,
and the headlight switch is off.
8-39
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page372
Friday, July 10 2015 5:27 PM
Black plate (372,1)
Maintenance and Care
Owner Maintenance
2. Remove the cover with a clothwrapped flathead screwdriver to the
cover.
License plate lights
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the lens,
and then remove the lens by carefully
prying on the edge of the lens with a
flathead screwdriver.
3. Turn the socket and bulb assembly
counterclockwise and remove it.
4. Disconnect the bulb from the socket.
3. Disconnect the bulb by pulling it out.
5. Install the new bulb in the reverse order
of the removal procedure.
High-mount brake light
The LED bulb cannot be replaced as a
single unit because it is an integrated unit.
The LED bulb has to be replaced with the
unit. We recommend an Authorized
Mazda Dealer when the replacement is
necessary.
8-40
Form No.8FA7-EA-15G
4. Install the new bulb in the reverse order
of the removal procedure.
Mazda5_8FA7-EA-15G_Edition2 Page373
Friday, July 10 2015 5:27 PM
Black plate (373,1)
Maintenance and Care
Owner Maintenance
qReplacing Interior Light Bulbs
Overhead light (Rear)
Overhead light (Front)/Map lights
1. Wrap a small flathead screwdriver with
a soft cloth to prevent damage to the
lens and remove the lens by carefully
prying on the edge of the lens with the
flathead screwdriver.
1. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the trim and
gently insert it in the overhead light as
shown in the figure, and then remove
the overhead light unit.
2. Disconnect the bulb by pulling it out.
2. Turn the socket and bulb assembly
counterclockwise and remove it.
3. Install the new bulb in the reverse order
of the removal procedure.
3. Disconnect the bulb from the socket.
Luggage compartment light
1. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the trim and
gently insert it in the luggage
compartment light as shown in the
figure, and then remove the luggage
compartment light unit.
2. Disconnect the bulb by pulling it out.
4. Install the new bulb in the reverse order
of the removal procedure.
8-41
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page374
Friday, July 10 2015 5:27 PM
Black plate (374,1)
Maintenance and Care
Owner Maintenance
3. Install the new bulb in the reverse order
of the removal procedure.
Fuses
Your vehicle's electrical system is
protected by fuses.
If any lights, accessories, or controls don't
work, inspect the appropriate circuit
protector. If a fuse has blown, the inside
element will be melted.
If the same fuse blows again, avoid using
that system and consult an Authorized
Mazda Dealer as soon as possible.
qFuse Replacement
Replacing the fuses on the passenger's
side
If the electrical system does not work,
first inspect the fuses on the passenger's
side.
1. Make sure the ignition is switched off,
and other switches are off.
2. Remove the cover.
CAUTION
Pulling the cover off sideways may
break the retaining tabs off.
8-42
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page375
Friday, July 10 2015 5:27 PM
Black plate (375,1)
Maintenance and Care
Owner Maintenance
3. Locate the position of the suspected
fuse by using the chart inside the fuse
block cover.
4. Pull the fuse straight out with the fuse
puller provided on the inside of the
engine compartment fuse block cover.
CAUTION
Always replace a fuse with one of the
same rating. Otherwise you may
damage the electric system.
7. Reinstall the cover and make sure that
it is securely installed.
Replacing the fuses under the hood
If the headlights or other electrical
components do not work and the fuses in
the cabin are normal, inspect the fuse
block under the hood. If a fuse is blown, it
must be replaced. Follow these steps:
1. Make sure the ignition is switched off,
and other switches are off.
5. Inspect the fuse and replace it if it's
blown.
Normal
2. Remove the fuse block cover.
Fuse block
Blown
6. Insert a new fuse of the same amperage
rating, and make sure it fits tightly. If it
does not fit tightly, have an expert
install it. We recommend an
Authorized Mazda Dealer.
If you have no spare fuses, borrow one
of the same rating from a circuit not
essential to vehicle operation, such as
the AUDIO or CIGAR circuit.
8-43
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page376
Friday, July 10 2015 5:27 PM
Maintenance and Care
Owner Maintenance
3. If any fuse but the MAIN fuse is
blown, replace it with a new one of the
same amperage rating.
Normal
Blown
WARNING
Do not replace the main fuse by
yourself. Have an Authorized Mazda
Dealer perform the replacement:
Replacing the fuse by yourself is
dangerous because the MAIN fuse is
a high current fuse. Incorrect
replacement could cause an electrical
shock or a short circuit resulting in a
fire.
Main fuse
4. Reinstall the cover and make sure that
it is securely installed.
8-44
Form No.8FA7-EA-15G
Black plate (376,1)
Mazda5_8FA7-EA-15G_Edition2 Page377
Friday, July 10 2015 5:27 PM
Black plate (377,1)
Maintenance and Care
Owner Maintenance
qFuse Panel Description
Fuse block (Engine compartment)
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
IG KEY1
AD FAN
GLOW2
HEATER2
FAN1
EGI MAIN
INJ
FAN2
ABS P
P.SLIDE L
TCM
EVVT
HEATER1
DCDC2
GLOW1
HEATER3
BTN
IG KEY2
FUSE
PROTECTED COMPONENT
RATING
50 A
For protection of various circuits
30 A
Cooling fan
30 A
Air conditioner
40 A
Engine control system
―
―
40 A
―
ABS, DSC
20 A
Transaxle control system
40 A
―
Air conditioner
30 A
Air conditioner
60 A
40 A
For protection of various circuits
For protection of various circuits
―
―
8-45
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page378
Friday, July 10 2015 5:27 PM
Black plate (378,1)
Maintenance and Care
Owner Maintenance
DESCRIPTION
FAN1
AT PUMP
P.SLIDE R
EHPAS
FOG
D.LOCK
P.WIND
AT PUMP
TCM
HEAD HI
13
14
15
16
17
18
19
20
21
22
STOP
F.WARMER
FUEL PUMP
HAZARD
ROOM
TAIL
ENG FAN
A/C MAG
ABS V
HORN
SUN ROOF
AUDIO1
H/CLEAN
DCDC3
HORN
ABS V
TAIL
ILLUMI
ENG INJ
ENG BAR
―
M.DEF
DEFOG
HEAD LO L
HEAD LO R
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
8-46
FUSE
RATING
30 A
―
―
80 A
15 A
20 A
20 A
―
―
20 A
PROTECTED COMPONENT
Cooling fan
―
―
Power assist steering
Fog lights í
Power door lock
Power window
―
―
Headlight high beam
10 A
Engine control system
10 A
Brake lights
20 A
Fuel system
10 A
15 A
Hazard warning flasher, Turn signal lights
Overhead lights
15 A
Taillights, Parking lights, License plate lights
10 A
20 A
―
20 A
―
―
―
15 A
―
―
7.5 A
25 A
15 A
―
7.5 A
25 A
15 A
15 A
Air conditioner
ABS, Dynamic stability control system
―
Moonroof í
―
―
―
Horn
―
―
Instrument panel illumination
Engine control system
Engine control system
―
Mirror defogger
Rear window defogger
Headlight low beam (LH)
Headlight low beam (RH)
í
Some models.
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page379
Friday, July 10 2015 5:27 PM
Black plate (379,1)
Maintenance and Care
Owner Maintenance
Fuse block (Passenger's side)
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
P/W
M.DEF
STARTER
ENG3
P/W
P.OUTLET
SHIFT/L
CIGAR
MIRROR
A/C
F.WIP
R.WIP
ENG
METER
SAS
S.WARM
ABS/DSC
EHPAS
ENG2
FUSE
RATING
30 A
―
10 A
20 A
―
15 A
5A
15 A
7.5 A
10 A
25 A
15 A
―
10 A
10 A
15 A
―
5A
15 A
PROTECTED COMPONENT
Power window
―
Engine control system
Engine control system
―
Accessory sockets (Cargo compartment)
Transaxle control system
Accessory sockets (Dashboard)
Power control mirror
Air conditioner
Front window wiper and washer
Rear window wiper
―
Instrument cluster
Air bag
Seat warmer í
―
Power assist steering
Engine control system
í
Some models.
Form No.8FA7-EA-15G
8-47
Mazda5_8FA7-EA-15G_Edition2 Page380
Friday, July 10 2015 5:27 PM
Black plate (380,1)
Maintenance and Care
Appearance Care
How to Minimize
Environmental Paint Damage
The paintwork on your Mazda represents
the latest technical developments in
composition and methods of application.
Environmental hazards, however, can
harm the paint's protective properties, if
proper care is not taken.
Here are some examples of possible
damage, with tips on how to prevent
them.
qEtching Caused by Acid Rain or
Industrial Fallout
Occurrence
Industrial pollutants and vehicle emissions
drift into the air and mix with rain or dew
to form acids. These acids can settle on a
vehicle's finish. As the water evaporates,
the acid becomes concentrated and can
damage the finish.
And the longer the acid remains on the
surface, the greater the chance is for
damage.
Prevention
It is necessary to wash and wax your
vehicle to preserve its finish according to
the instructions in this section. These
steps should be taken immediately after
you suspect that acid rain has settled on
your vehicle's finish.
qDamage Caused by Bird
Dropping, Insects, or Tree Sap
Occurrence
Bird droppings contain acids. If these
aren't removed they can eat away the clear
and color base coat of the vehicle's
paintwork.
When insects stick to the paint surface
and decompose, corrosive compounds
form. These can erode the clear and color
base coat of the vehicle's paintwork if
they are not removed.
Tree sap will harden and adhere
permanently to the paint finish. If you
scratch the sap off while it is hard, some
vehicle paint could come off with it.
Prevention
It is necessary to have your Mazda
washed and waxed to preserve its finish
according to the instructions in this
section. This should be done as soon as
possible.
Bird droppings can be removed with a
soft sponge and water. If you are traveling
and these are not available, a moistened
tissue may also take care of the problem.
The cleaned area should be waxed
according to the instructions in this
section.
Insects and tree sap are best removed with
a soft sponge and water or a commercially
available chemical cleaner.
Another method is to cover the affected
area with dampened newspaper for one to
two hours. After removing the newspaper,
rinse off the loosened debris with water.
8-48
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page381
Friday, July 10 2015 5:27 PM
Black plate (381,1)
Maintenance and Care
Appearance Care
qWater Marks
Occurrence
Rain, fog, dew, and even tap water can
contain harmful minerals such as salt and
lime. If moisture containing these
minerals settles on the vehicle and
evaporates, the minerals will concentrate
and harden to form white rings. The rings
can damage your vehicle's finish.
Prevention
It is necessary to wash and wax your
vehicle to preserve its finish according to
the instructions in this section. These
steps should be taken immediately after
you find water marks on your vehicle's
finish.
NOTE
l
l
l
The paint chipping zone varies with the
speed of the vehicle. For example, when
traveling at 90 km/h (56 mph), the paint
chipping zone is 50 m (164 ft).
In low temperatures a vehicle's finish
hardens. This increases the chance of paint
chipping.
Chipped paint can lead to rust forming on
your Mazda. Before this happens, repair the
damage by using Mazda touch-up paint
according to the instructions in this section.
Failure to repair the affected area could
lead to serious rusting and expensive
repairs.
qPaint Chipping
Occurrence
Paint chipping occurs when gravel thrown
in the air by another vehicle's tires hits
your vehicle.
How to avoid paint chipping
Keeping a safe distance between you and
the vehicle ahead reduces the chances of
having your paint chipped by flying
gravel.
8-49
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page382
Friday, July 10 2015 5:27 PM
Black plate (382,1)
Maintenance and Care
Appearance Care
Exterior Care
Follow all label and container directions
when using a chemical cleaner or polish.
Read all warnings and cautions.
8-50
Form No.8FA7-EA-15G
qMaintaining the Finish
Washing
CAUTION
Ø When the wiper lever is in the
AUTO position and the ignition is
switched ON, the wipers may
move automatically in the
following cases:
Ø If the windshield above the rain
sensor is touched or wiped with
a cloth.
Ø If the windshield is struck with
a hand or other object from
either outside or inside the
vehicle.
Keep hands and scrapers clear of
the windshield when the wiper
lever is in the AUTO position and
the ignition is switched ON as
fingers could be pinched or the
wipers and wiper blades damaged
when the wipers activate
automatically.
If you are going to clean the
windshield, be sure the wipers are
turned off completely―this is
particularly important when
clearing ice and snow―when it is
most likely that the engine is left
running.
Ø Do not spray water in the engine
compartment. Otherwise, it could
result in engine-starting problems
or damage to electrical parts.
Ø When washing and waxing the
vehicle, be careful not to apply
excessive force to any single area
of the vehicle roof or the antenna.
Otherwise, you could dent the
vehicle or damage the antenna.
Mazda5_8FA7-EA-15G_Edition2 Page383
Friday, July 10 2015 5:27 PM
Black plate (383,1)
Maintenance and Care
Appearance Care
To help protect the finish from rust and
deterioration, wash your Mazda
thoroughly and frequently, at least once a
month, with lukewarm or cold water.
If the vehicle is washed improperly, the
paint surface could be scratched. Here are
some examples of how scratching could
occur.
Scratches occur on the paint surface
when:
l The vehicle is washed without first
rinsing off dirt and other foreign
matter.
l The vehicle is washed with a rough,
dry, or dirty cloth.
l The vehicle is washed at a car wash
that uses brushes that are dirty or too
stiff.
l Cleansers or wax containing abrasives
are used.
NOTE
l
l
Mazda is not responsible for scratches
caused by automatic car washes or
improper washing.
Scratches are more noticeable on vehicles
with darker paint finishes.
To minimize scratches on the vehicle's
paint finish:
l Rinse off any dirt or other foreign
matter using lukewarm or cold water
before washing.
l Use plenty of lukewarm or cold water
and a soft cloth when washing the
vehicle. Do not use a nylon cloth.
l Rub gently when washing or drying the
vehicle.
l Take your vehicle only to a car wash
that keeps its brushes well maintained.
l Do not use abrasive cleansers or wax
that contain abrasives.
CAUTION
Ø Do not use steel wool, abrasive
cleaners, or strong detergents
containing highly alkaline or
caustic agents on chrome-plated
or anodized aluminum parts. This
may damage the protective
coating; also, cleaners and
detergents may discolor or
deteriorate the paint.
Ø To prevent damaging the antenna,
remove it before entering a car
wash facility or passing beneath a
low overhead clearance.
Pay special attention to removing salt,
dirt, mud, and other foreign material from
the underside of the fenders, and make
sure the drain holes in the lower edges of
the doors and rocker panels are clean.
Insects, tar, tree sap, bird droppings,
industrial fallout, and similar deposits can
damage the finish if not removed
immediately. When prompt washing with
plain water is ineffective, use a mild soap
made for use on vehicles.
Thoroughly rinse off all soap with
lukewarm or cold water. Do not allow
soap to dry on the finish.
After washing the vehicle, dry it with a
clean chamois to prevent water spots from
forming.
8-51
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page384
Friday, July 10 2015 5:27 PM
Black plate (384,1)
Maintenance and Care
Appearance Care
WARNING
Dry off brakes that have become wet
by driving slowly, releasing the
accelerator pedal and lightly applying
the brakes several times until the brake
performance returns to normal:
Driving with wet brakes is
dangerous. Increased stopping
distance or the vehicle pulling to one
side when braking could result in a
serious accident. Light braking will
indicate whether the brakes have
been affected.
When using an automatic car wash
l Retract the door mirrors.
l The automatic car wash brushes could
reduce the paint lustre or hasten paint
deterioration.
Always wash and dry the vehicle before
waxing it. In addition to the vehicle body,
wax the metal trim to maintain its luster.
1. Use wax which contains no abrasives.
Waxes containing abrasive will remove
paint and could damage bright metal
parts.
2. Use a good grade of natural wax for
metallic, mica, and solid colors.
3. When waxing, coat evenly with the
sponge supplied or a soft cloth.
4. Wipe off the wax with a soft cloth.
NOTE
A spot remover to remove oil, tar, and similar
materials will usually also take off the wax.
Rewax these areas even if the rest of the
vehicle does not need it.
When using a high water pressure car
wash
qRepairing Damage to the Finish
High water temperature and high water
pressure car washers are available
depending on the type of car wash
machine. If the car washer nozzle is put
too close to the vehicle, the force of the
spray could damage or deform the
molding, affect the sealability of parts,
and allow water to penetrate the interior.
Keep a sufficient space (30 cm (12 in) or
more) between the nozzle and the vehicle.
In addition, do not spend too much time
spraying the same area of the vehicle, and
be very careful when spraying between
gaps in doors and around windows.
Deep scratches or chips on the finish
should be repaired promptly. Exposed
metal quickly rusts and can lead to major
repairs.
Waxing
Your vehicle needs to be waxed when
water no longer beads on the finish.
CAUTION
If your Mazda is damaged and needs
metal parts repaired or replaced,
make sure the body shop applies
anti-corrosion materials to all parts,
both repaired and new. This will
prevent them from rusting.
qBright-Metal Maintenance
l
l
8-52
Form No.8FA7-EA-15G
Use tar remover to remove road tar and
insects. Never do this with a knife or
similar tool.
To prevent corrosion on bright-metal
surfaces, apply wax or chrome
preservative and rub it to a high luster.
Mazda5_8FA7-EA-15G_Edition2 Page385
Friday, July 10 2015 5:27 PM
Black plate (385,1)
Maintenance and Care
Appearance Care
l
During cold weather or in coastal areas,
cover bright-metal parts with a coating
of wax or preservative heavier than
usual. It would also help to coat them
with noncorrosive petroleum jelly or
some other protective compound.
CAUTION
Do not use steel wool, abrasive
cleaners, or strong detergents
containing highly alkaline or caustic
agents on chrome-plated or anodized
aluminum parts. This may result in
damage to the protective coating and
cause discoloration or paint
deterioration.
qUnderbody Maintenance
Road chemicals and salt used for ice and
snow removal and solvents used for dust
control may collect on the underbody. If
not removed, they will speed up rusting
and deterioration of such underbody parts
as fuel lines, frame, floor pan, and exhaust
system, even though these parts may be
coated with anti-corrosive material.
WARNING
Dry wet brakes by driving very slowly
and applying the brakes lightly until
brake performance is normal:
Driving with wet brakes is
dangerous. Increased stopping
distance or the vehicle pulling to one
side when braking could result in a
serious accident. Light braking will
indicate whether the brakes have
been affected.
qAluminum Wheel Maintenance
A protective coating is provided over the
aluminum wheels. Special care is needed
to protect this coating.
CAUTION
Do not use any detergent other than
mild detergent. Before using any
detergent, verify the ingredients.
Otherwise, the product could discolor
or stain the aluminum wheels.
Thoroughly flush the underbody and
wheel housings with lukewarm or cold
water at the end of each winter. Try also
to do this every month.
Pay special attention to these areas
because they easily hide mud and dirt. It
will do more harm than good to wet
down the road grime without removing
it.
The lower edges of doors, rocker panels,
and frame members have drain holes that
should not be clogged. Water trapped
there will cause rusting.
8-53
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page386
Friday, July 10 2015 5:27 PM
Black plate (386,1)
Maintenance and Care
Appearance Care
NOTE
Do not use a wire brush or any abrasive
cleaner, polishing compound, or solvent on
aluminum wheels. They may damage the
coating.
l Always use a sponge or soft cloth to clean
the wheels.
Rinse the wheels thoroughly with lukewarm
or cold water. Also, be sure to clean the
wheels after driving on dusty or salted
roads to help prevent corrosion.
l Avoid washing your vehicle in an automatic
car wash that uses high-speed or hard
brushes.
l If your aluminum wheels lose luster, wax
the wheels.
(With Tire Pressure Monitoring System)
Check special requirements for Tire Pressure
Monitoring System.
Refer to Tires and Wheels on page 5-32.
l
l
qPlastic Part Maintenance
l
l
When cleaning the plastic lenses of the
lights, do not use gasoline, kerosene,
rectified spirit, paint, thinner, highly
acidic detergents, or strongly alkaline
detergents. Otherwise, these chemical
agents can discolor or damage the
surfaces resulting in a significant loss
in functionality. If plastic parts become
inadvertently exposed to any of these
chemical agents, flush with water
immediately.
If plastic parts such as the bumpers
become inadvertently exposed to
chemical agents or fluids such as
gasoline, oil, engine coolant, or battery
fluid, it could cause discoloration,
staining, or paint peeling. Wipe off any
such chemical agents or fluids using a
soft cloth immediately.
8-54
Form No.8FA7-EA-15G
l
l
High water temperature and high water
pressure car washers are available
depending on the type of high pressure
car washer device. If the car washer
nozzle is put too close to the vehicle or
aimed at one area for an extended
period of time, it could deform plastic
parts or damage the paint.
Do not use wax containing compounds
(polish). Otherwise, it could result in
paint damage.
In addition, do not use an electrical or
air tool to apply wax. Otherwise, the
frictional heat generated could result in
deformation of plastic parts or paint
damage.
Mazda5_8FA7-EA-15G_Edition2 Page387
Friday, July 10 2015 5:27 PM
Black plate (387,1)
Maintenance and Care
Appearance Care
Interior Care
WARNING
Do not spray water in the cabin:
Splashing water on electrical parts
such as the audio unit and switches
is dangerous as it could cause a
malfunction or a fire.
qDashboard Precautions
Prevent caustic solutions such as perfume
and cosmetic oils from contacting the
dashboard. They'll damage and discolor
the dashboard. If these solutions get on
the dashboard, wipe them off
immediately.
Leather í
Remove dust and sand first using a
vacuum cleaner or other means, then wipe
dirt off using a soft cloth with a leather
cleaner or a soft cloth soaked in mild
soap.
Wipe off the remaining cleaner or soap
using a cloth soaked in clean water and
wrung out well.
Remove moisture with a dry, soft cloth
and allow the leather to further dry in a
well-ventilated, shaded area. If the leather
gets wet such as from rain, also remove
moisture and dry it as soon as possible.
CAUTION
Do not use glazing agents.
Glazing agents contain ingredients
which may cause discoloration,
wrinkling, cracks and peeling.
qCleaning the Upholstery and
Interior Trim
Vinyl
Remove dust and loose dirt from vinyl
with a whisk broom or vacuum cleaner.
Clean vinyl with a leather-and-vinyl
cleaner.
í
Some models.
Form No.8FA7-EA-15G
8-55
Mazda5_8FA7-EA-15G_Edition2 Page388
Friday, July 10 2015 5:27 PM
Black plate (388,1)
Maintenance and Care
Appearance Care
NOTE
l
l
l
l
l
l
l
l
l
Because genuine leather is a natural
material, its surface is not uniform and it
may have natural scars, scratches, and
wrinkles.
To maintain the quality for as long as
possible, periodical maintenance, about
twice a year, is recommended.
Sand and dust on the seat surface may
damage the overcoat of the genuine leather
surfaces and accelerate wear.
Greasy soiling on genuine leather may
cause molding and stains.
Rubbing hard with a stiff brush or cloth
may cause damage.
Do not wipe the leather using alcohol,
chlorine bleach, or organic solvents such as
thinner, benzene, or gasoline. Otherwise, it
may cause discoloration or stains.
If the seats get wet, promptly remove
moisture with a dry cloth. Remaining
moisture on the surface may cause
deterioration such as hardening and
shrinkage.
Exposure to direct sunlight for long periods
may cause deterioration and shrinkage.
When parking the car under direct sunlight
for long periods, shade the interior using
sunshades.
Do not leave vinyl products on the seats for
long periods as they may affect the leather
quality and coloring. If the cabin
temperature becomes hot, the vinyl may
deteriorate and adhere to the genuine
leather.
Fabric
Remove dust and loose dirt from fabric
with a whisk broom or vacuum cleaner.
Clean it with a mild soap solution good
for upholstery and carpets. Remove fresh
spots immediately with a fabric spot
cleaner.
8-56
Form No.8FA7-EA-15G
To keep the fabric looking clean and
fresh, take care of it. Otherwise its color
will be affected, it can be stained easily,
and its fire-resistance may be reduced.
CAUTION
Use only recommended cleaners and
procedures. Others may affect
appearance and fire-resistance.
Panel
When the interior panels need to be
cleaned, use soft material such as a soft
cloth soaked in clean water and wrung out
well and lightly wipe off dirt from the
surface. If a panel requires further
cleaning, use the following procedure.
1. Wipe dirt off using a soft cloth soaked
in mild detergent (about 5% solution).
2. Wipe off any remaining detergent
using a cloth soaked in clean water and
wrung out well.
NOTE
l
l
l
Do not wipe leather parts using alcohol,
chlorine bleach, or organic solvents such as
thinner, benzene, or gasoline. Otherwise, it
may cause discoloration or stains.
Scratches or nicks on the panels and
metallic trim resulting from the use of a
hard brush or cloth may not be repairable.
Be particularly careful when cleaning high
lustre panels and metallic trim as they can
be easily scratched.
Mazda5_8FA7-EA-15G_Edition2 Page389
Friday, July 10 2015 5:27 PM
Black plate (389,1)
Maintenance and Care
Appearance Care
qCleaning the Lap/Shoulder Belt
Webbing
Clean the webbing with a mild soap
solution recommended for upholstery or
carpets. Follow instructions. Don't bleach
or dye the webbing; this may weaken it.
After cleaning the belts, thoroughly dry
the belt webbing and make sure there is
no remaining moisture before retracting
them.
WARNING
Have an Authorized Mazda Dealer
replace damaged seat belts
immediately:
Using damaged seat belts is
dangerous. In a collision, damaged
belts cannot provide adequate
protection.
qCleaning the Floor Mats
Rubber floor mats should be cleaned with
mild soap and water only.
WARNING
Do not use rubber cleaners, such as tire
cleaner or tire shine, when cleaning
rubber floor mats:
Cleaning the rubber floor mats with
rubber cleaning products makes the
floor mats slippery.
This may cause an accident when
depressing the accelerator, brake, or
clutch (Manual transaxle) pedal or
when getting in or out of the vehicle.
After removing the floor mats for
cleaning, always reinstall them
securely.Refer to Floor Mat on page 4-7.
qCleaning the Window Interiors
If the windows become covered with an
oily, greasy, or waxy film, clean them
with glass cleaner. Follow the directions
on the container.
CAUTION
Ø Do not scrape or scratch the inside
of the window glass. It could
damage the thermal filaments
and the antenna lines.
Ø When washing the inside of the
window glass, use a soft cloth
dampened in lukewarm water,
gently wiping the thermal
filaments and the antenna lines.
Use of glass cleaning products
could damage the thermal
filaments and the antenna lines.
8-57
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page390
Friday, July 10 2015 5:27 PM
8-58
Form No.8FA7-EA-15G
Black plate (390,1)
Mazda5_8FA7-EA-15G_Edition2 Page391
Friday, July 10 2015 5:27 PM
9
Black plate (391,1)
Customer Information and Reporting
Safety Defects
Important consumer information including warranties and add-on equipment.
Customer Assistance ............................... 9-2
Customer Assistance (U.S.A.) ............ 9-2
Customer Assistance (Canada) ........... 9-7
Customer Assistance (Puerto Rico) ... 9-10
Customer Assistance (Mexico) ......... 9-11
Mazda Importer/Distributors ............... 9-13
Importer/Distributor .......................... 9-13
Warranty ................................................ 9-14
Warranties for Your Mazda ............... 9-14
Outside the United States .................. 9-15
Outside Canada ................................. 9-16
Registering Your Vehicle in A Foreign
Country (Except United States and
Canada) ............................................. 9-17
Add-On Non-Genuine Parts and
Accessories ....................................... 9-18
Tire Information (U.S.A.) ..................... 9-23
Tire Labeling ..................................... 9-23
Location of the Tire Label
(Placard) ............................................ 9-29
Tire Maintenance .............................. 9-32
Vehicle Loading ................................ 9-35
Steps for Determining the Correct Load
Limit ................................................. 9-41
Reporting Safety Defects ....................... 9-42
Reporting Safety Defects (U.S.A.) .... 9-42
Reporting Safety Defects (Canada) ... 9-43
Cell Phones ............................................. 9-19
Cell Phones Warning ......................... 9-19
Event Data Recorder ............................. 9-20
Event Data Recorder (U.S.A. and
Canada) ............................................. 9-20
Uniform Tire Quality Grading System
(UTQGS) ................................................ 9-21
Uniform Tire Quality Grading System
(UTQGS) .......................................... 9-21
9-1
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page392
Friday, July 10 2015 5:27 PM
Black plate (392,1)
Customer Information and Reporting Safety Defects
Customer Assistance
Customer Assistance (U.S.A.)
Your complete and permanent satisfaction is our business. We are here to serve you. All
Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle
in top condition.
If you have any questions or recommendations for improvement regarding the service of
your Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you take
the following steps:
NOTE
If it becomes necessary to have the components or wiring system for the supplementary restraint
system modified to accommodate a person with certain medical conditions in accordance with a
certified physician, contact an Authorized Mazda Dealer. For more information, go to NHTSA
website www.safercar.gov (VEHICLE SHOPPERS → Air Bags → Air Bag FAQs → Air Bag
Deactivation).
qSTEP 1: Contact Your Mazda Dealer
Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to
address the issue.
l If your concern has not been resolved by the CUSTOMER RELATIONS, SALES,
SERVICE, or PARTS MANAGER, then please contact the GENERAL MANAGER of
the dealership or the OWNER.
l If it becomes necessary to have the components or wiring system for the supplementary
restraint system modified to accommodate a person with certain medical conditions in
accordance with a certified physician, go to STEP 2.
qSTEP 2: Contact Mazda North American Operations
If for any reason you feel the need for further assistance after contacting your dealership
management or it becomes necessary to have the components or wiring system for the
supplementary restraint system modified to accommodate a person with certain medical
conditions in accordance with a certified physician, you can reach Mazda North American
Operations by one of the following ways.
Log on: at www.mazdaUSA.com
Answers to many questions, including how to locate or contact a local Mazda dealership in
the U.S., can be found here.
E-mail: click on “Contact Us” located on the “Inside Mazda” tab, or at the bottom of the
page at www.mazdaUSA.com
By phone at: 1 (800) 222-5500
9-2
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page393
Friday, July 10 2015 5:27 PM
Black plate (393,1)
Customer Information and Reporting Safety Defects
Customer Assistance
By letter at:
Attn: Customer Assistance
Mazda North American Operations
7755 Irvine Center Drive
Irvine, CA 92618-2922
P.O. Box 19734
Irvine, CA 92623-9734
In order to serve you efficiently and effectively, please help us by providing the following
information:
1. Your name, address, and telephone number
2. Year and model of vehicle
3. Vehicle Identification Number (17 digits, noted on your registration or title or located on
the upper driver's side corner of the dash)
4. Purchase date and current mileage
5. Your dealer's name and location
6. Your question(s)
If you live outside the U.S.A., please contact your nearest Mazda Distributor.
qSTEP 3: Contact Better Business Bureau (BBB)
Mazda North American Operations realizes that mutual agreement on some issues may not
be possible. As a final step to ensure that your concerns are being fairly considered, Mazda
North American Operations has agreed to participate in a dispute settlement program
administered by the Better Business Bureau (BBB) system, at no cost to you the consumer.
BBB AUTO LINE works with consumers and the manufacturer in an attempt to reach a
mutually acceptable resolution of any warranty related concerns. If the BBB is not able to
facilitate a settlement they will provide an informal hearing before an arbitrator.
You are required to resort to BBB AUTO LINE before exercising rights or seeking
remedies under the Federal Magnuson-Moss Warranty Act, 15 U.S.C. § 2301 et seq. To the
extent permitted by the applicable state “Lemon Law”, you are also required to resort to
BBB AUTO LINE before exercising any rights or seeking remedies under the “Lemon
Law”. If you choose to seek remedies that are not created by the Magnuson-Moss Warranty
Act or the applicable state “Lemon Law”, you are not required to first use BBB AUTO
LINE.
9-3
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page394
Friday, July 10 2015 5:27 PM
Black plate (394,1)
Customer Information and Reporting Safety Defects
Customer Assistance
The whole process normally takes 40 days or less. The arbitration decision is not binding
on you or Mazda unless you accept the decision. For more information about BBB AUTO
LINE, including current eligibility standards, please call 1-800-955-5100 or visit the BBB
website at www.lemonlaw.bbb.org.
Being truly committed to customer satisfaction is more than a phrase with Mazda. We hope
to satisfy every customer directly, but if there is ever a question about our decision, Mazda
believes in providing a fast, fair and free method such as the BBB AUTO LINE to ensure
Mazda delivers on our commitment to do the right thing for our customers!
qCalifornia Customers
1. Mazda North American Operations participates in BBB AUTO LINE, a mediation/
arbitration program administered by the Council of Better Business Bureaus [4200
Wilson Boulevard, Arlington, Virginia 22203] through local Better Business Bureaus.
BBB AUTO LINE and Mazda have been certified by the Arbitration Certification
Program of the California Department of Consumer Affairs.
2. If you have a problem arising under a Mazda written warranty, we encourage you to
bring it to our attention. If we are unable to resolve it, you may file a claim with BBB
AUTO LINE. Claims must be filed with BBB AUTO LINE within six (6) months after
the expiration of the warranty.
3. To file a claim with BBB AUTO LINE, call 1-800-955-5100. There is no charge for the
call.
4. In order to file a claim with BBB AUTO LINE, you will have to provide your name and
address, the brand name and vehicle identification number (VIN) of your vehicle, and a
statement of the nature of your problem or complaint. You will also be asked to provide:
the approximate date of your acquisition of the vehicle, the vehicle's current mileage, the
approximate date and mileage at the time any problem(s) were first brought to the
attention of Mazda or one of our dealers, and a statement of the relief you are seeking.
5. BBB AUTO LINE staff may try to help resolve your dispute through mediation. If
mediation is not successful, or if you do not wish to participate in mediation, claims
within the program's jurisdiction may be presented to an arbitrator at an informal
hearing. The arbitrator's decision should ordinarily be issued within 40 days from the
time your complaint is filed; there may be a delay of 7 days if you did not first contact
Mazda about your problem, or a delay of up to 30 days if the arbitrator requests an
inspection/report by an impartial technical expert or further investigation and report by
BBB AUTO LINE.
9-4
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page395
Friday, July 10 2015 5:27 PM
Black plate (395,1)
Customer Information and Reporting Safety Defects
Customer Assistance
6. You are required to use BBB AUTO LINE before asserting in court any rights or
remedies conferred by California Civil Code Section 1793.22. You are also required to
use BBB AUTO LINE before exercising rights or seeking remedies created by Title I of
the Magnuson-Moss Warranty Act, 15 U.S.C. sec. 2301 et seq. If you choose to seek
redress by pursuing rights and remedies not created by California Civil Code Section
1793.22 or Title I of the Magnuson-Moss Warranty Act, resort to BBB AUTO LINE is
not required by those statutes.
7. California Civil Code Section 1793.2 (d) requires that, if Mazda or its representative is
unable to repair a new motor vehicle to conform to the vehicle's applicable express
warranty after a reasonable number of attempts, Mazda may be required to replace or
repurchase the vehicle. California Civil Code Section 1793.22 (b) creates a presumption
that Mazda has had a reasonable number of attempts to conform the vehicle to its
applicable express warranties if, within 18 months from delivery to the buyer or 18,000
miles on the vehicle's odometer, whichever occurs first, one or more of the following
occurs:
l The same nonconformity [a failure to conform to the written warranty that
substantially impairs the use, value or safety of the vehicle] results in a condition that
is likely to cause death or serious bodily injury if the vehicle is driven AND the
nonconformity has been subject to repair two or more times by Mazda or its agents
AND the buyer or lessee has directly notified Mazda of the need for the repair of the
nonconformity; OR
l The same nonconformity has been subject to repair 4 or more times by Mazda or its
agents AND the buyer has notified Mazda of the need for the repair of the
nonconformity; OR
l The vehicle is out of service by reason of repair of nonconformities by Mazda or its
agents for a cumulative total of more than 30 calendar days after delivery of the
vehicle to the buyer.
NOTICE TO Mazda AS REQUIRED ABOVE SHALL BE SENT TO THE
FOLLOWING ADDRESS:
Mazda North American Operations
7755 Irvine Center Drive
Irvine, CA 92618
ATTN: Customer Mediation
8. The following remedies may be sought in BBB AUTO LINE: repairs, reimbursement
for money paid to repair a vehicle or other expenses incurred as result of a vehicle
nonconformity, repurchase or replacement of your vehicle, and compensation for
damages and remedies available under Mazda's written warranty or applicable law.
9. The following remedies may not be sought in BBB AUTO LINE: punitive or multiple
damages, attorneys' fees, or consequential damages other than as provided in California
Civil Code Section 1794 (a) and (b).
9-5
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page396
Friday, July 10 2015 5:27 PM
Black plate (396,1)
Customer Information and Reporting Safety Defects
Customer Assistance
10. You may reject the decision issued by a BBB AUTO LINE arbitrator. If you reject the
decision, you will be free to pursue further legal action. The arbitrator's decision and
any findings will be admissible in a court action.
11. If you accept the arbitrator's decision, Mazda will be bound by the decision, and will
comply with the decision within a reasonable time not to exceed 30 days after we
receive notice of your acceptance of the decision.
12. Please call BBB AUTO LINE at 1-800-955-5100 for further details about the program.
9-6
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page397
Friday, July 10 2015 5:27 PM
Black plate (397,1)
Customer Information and Reporting Safety Defects
Customer Assistance
Customer Assistance (Canada)
qSatisfaction Review Process
Your complete and permanent satisfaction is of primary concern to Mazda. All Authorized
Mazda Dealers have both the knowledge and tools to keep your Mazda in top condition. In
our experience, any questions, problems, or complaints regarding the operation of your
Mazda or any other general service transactions are most effectively resolved by your
dealer. If the cause of your dissatisfaction cannot adequately be addressed by normal
dealership procedures, we recommend that you take the following steps:
qSTEP 1: Contact the Mazda Dealer
Discuss the matter with a member of dealership management. If the Service Manager has
already reviewed your concerns, contact the owner of the dealership or its General
Manager.
qSTEP 2: Contact the Mazda Regional Office
If you feel that you still require assistance, ask the dealer Service Manager to arrange for
you to meet the local Mazda Service Representative. If more expedient, contact Mazda
Canada Inc.Regional Office nearest you for such arrangements. Regional Office address
and phone numbers are shown (page 9-9).
qSTEP 3: Contact the Mazda Customer Relations Department
If still not substantially satisfied, contact the Customer Relations Department, Mazda
Canada Inc., 55 Vogell Road, Richmond Hill, Ontario, L4B 3K5 Canada TEL: 1 (800)
263-4680.
Provide the Department with the following information:
1. Your name, address and telephone number
2. Year and model of vehicle
3. Vehicle Identification Number (VIN). Refer to the “Vehicle Identification Labels” page
of section 10 of this manual for the location of the VIN.
4. Purchase date
5. Present odometer reading
6. Your dealer's name and location
7. The nature of your problem and/or cause of dissatisfaction
The Department, in cooperation with the local Mazda Service Representative, will review
the case to determine if everything possible has been done to ensure your satisfaction.
9-7
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page398
Friday, July 10 2015 5:27 PM
Black plate (398,1)
Customer Information and Reporting Safety Defects
Customer Assistance
Please recognize that the resolution of service problems in most cases requires the use of
your Mazda dealer's service facilities, personnel and equipment. We urge you to follow the
above three steps in sequence for most effective results.
qMediation/Arbitration Program
Occasionally a customer concern cannot be resolved through Mazda's Customer
Satisfaction Program. If after exhausting the procedures in this manual your concern is still
not resolved, you have another option.
Mazda Canada Inc. participates in an arbitration program administered by the
Canadian Motor Vehicle Arbitration Plan (CAMVAP). CAMVAP will advise you about
how your concern may be reviewed and resolved by an independent third party through
binding arbitration.
Your complete satisfaction is the goal of Mazda Canada Inc. and our dealers.
Mazda's participation in CAMVAP makes a valuable contribution to our achieving that
goal. There is no charge for using CAMVAP. CAMVAP results are fast, fair and final as the
award is binding on both you and Mazda Canada Inc.
qCanadian Motor Vehicle Arbitration Plan (CAMVAP)
If a specific item of concern arises, where a solution cannot be reached between an owner,
Mazda, and/or one of its dealers (that all parties cannot agree upon), the owner may wish to
use the services offered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).
CAMVAP uses the services of Provincial Administrators to assist consumers in scheduling
and preparing for their arbitration hearings. However, before you can proceed with
CAMVAP you must follow your Mazda dispute resolution process as outlined previously.
9-8
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page399
Friday, July 10 2015 5:27 PM
Black plate (399,1)
Customer Information and Reporting Safety Defects
Customer Assistance
CAMVAP is fully implemented in all provinces and territories.
Consumers wishing to obtain further information about the Program should contact the
Provincial Administrator at 1 (800) 207-0685, or by contacting the
Canadian Motor Vehicle Arbitration Plan Office at:
Canadian Motor Vehicle Arbitration Plan
235 Yorkland Boulevard, suite 300
North York, Ontario
M2J 4Y8
http://camvap.ca
Provincial Administrators may be reached locally as listed below:
Province/Territory
British Columbia & Yukon Territories
Alberta & Northwest Territories
Saskatchewan
Manitoba
Ontario
Atlantic Canada
Quebec
CAMVAP Number
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
qRegional Offices
REGIONAL OFFICES
MAZDA CANADA INC.
WESTERN REGION
5011 275 STREET
LANGLEY, BRITISH COLUMBIA
V4W 0A8
(778) 369-2100
1 (800) 663-0908
MAZDA CANADA INC.
CENTRAL REGION
55 VOGELL ROAD,
RICHMOND HILL,
ONTARIO, L4B 3K5
1 (800) 263-4680
MAZDA CANADA INC.
QUEBEC REGION
6111 ROUTE TRANSCANADIENNE
POINTE CLAIRE, QUEBEC
H9R 5A5
(514) 694-6390
COVERING AREAS
ALBERTA,
BRITISH COLUMBIA,
MANITOBA,
SASKATCHEWAN,
YUKON
ONTARIO,
NEW BRUNSWICK,
NOVA SCOTIA,
PRINCE EDWARD ISLAND,
NEWFOUNDLAND
QUEBEC
9-9
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page400
Friday, July 10 2015 5:27 PM
Black plate (400,1)
Customer Information and Reporting Safety Defects
Customer Assistance
Customer Assistance (Puerto Rico)
Your complete and permanent satisfaction is our business. That is why all Authorized
Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top
condition.
If you have any questions or recommendations for improvement regarding the service of
your Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you take
the following steps:
qSTEP 1
Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to
address the issue. If your concern has not been resolved by the CUSTOMER RELATIONS,
SALES, SERVICE, or PARTS MANAGER, then please contact the GENERAL
MANAGER of the dealership or the OWNER.
qSTEP 2
If, after following STEP 1, you feel the need for further assistance, please contact your
area's Mazda representative (Indicated on the next page).
Please help us by providing the following information:
1. Your name, address, and telephone number
2. Year and model of vehicle
3. Vehicle Identification Number (17 digits, noted on your registration or title or located on
the upper driver's side corner of the dash)
4. Purchase date and current mileage
5. Your dealer's name and location
6. Your question(s)
9-10
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page401
Friday, July 10 2015 5:27 PM
Black plate (401,1)
Customer Information and Reporting Safety Defects
Customer Assistance
Customer Assistance (Mexico)
Your complete and permanent satisfaction is our business. We are here to serve you. All
Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle
in top condition.
If you have any questions or recommendations for improvement regarding the service of
your Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you take
the following steps:
qContact Your Mazda Dealer
Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to
address the issue.
l If your concern has not been resolved by the CUSTOMER RELATIONS, SALES,
SERVICE, or PARTS MANAGER, then please contact the GENERAL MANAGER of
the dealership or the OWNER.
l If it becomes necessary to have the components or wiring system for the supplementary
restraint system modified to accommodate a person with certain medical condition in
accordance with a certified physician you must contact your dealership in order to avoid
the potential loss of the warranty of your vehicle which may occur if some third party is
hired by the customer to make any modifications to this system.
Log on: at www.MazdaMexico.com.mx
Answers to many questions, including how to locate or contact a local Mazda dealership in
Mexico, can be found here.
E-mail: click on “Contactanos” at the top of the page at www.MazdaMexico.com.mx
By phone at: 01 800 01 MAZDA (62932)
By letter at:
Attn: Customer Assistance
Mazda Motor de Mexico
Mario Pani #150, PB Col. Lomas de Santa Fe
Mexico, D.F. C.P. 05300
Del. Cuajimalpa de Morelos
Tel: Customer Assistance
01 800 01 MAZDA (62932).
In order to serve you efficiently and effectively, please help us by providing the following
information:
1. Your name, address, and telephone number
9-11
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page402
Friday, July 10 2015 5:27 PM
Black plate (402,1)
Customer Information and Reporting Safety Defects
Customer Assistance
2. Year and model of vehicle
3. Vehicle Identification Number (17 digits, noted on your registration or title or located on
the upper driver's side corner of the dash)
4. Purchase date and current mileage
5. Your dealer's name and location
6. Your question(s)
9-12
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page403
Friday, July 10 2015 5:27 PM
Black plate (403,1)
Customer Information and Reporting Safety Defects
Mazda Importer/Distributors
Importer/Distributor
qU.S.A.
Mazda North American Operations
7755 Irvine Center Drive
Irvine, CA 92618-2922 U.S.A.
P.O. Box 19734
Irvine, CA 92623-9734 U.S.A.
TEL: 1 (800) 222-5500 (in U.S.A.)
(949) 727-1990 (outside U.S.A.)
qSAIPAN
Pacific International Marianas, Inc.
(d.b.a. Midway Motors)
P.O. Box 887 Saipan, MP 96950
TEL: (670) 234-7524
Triple J Saipan, Inc.
(d.b.a. Triple J Motors)
P.O. Box 500487 Saipan, MP 96950-0487
TEL: (670) 234-7133/3051
qCANADA
qAMERICAN SAMOA
Mazda Canada Inc.
55 Vogell Road, Richmond Hill,
Ontario, L4B 3K5 Canada
TEL: 1 (800) 263-4680 (in Canada)
(905) 787-7000 (outside Canada)
Polynesia Motors, Inc.
P.O. Box 1120, Pago Pago, American
Samoa 96799
TEL: (684) 699-9347
qPUERTO RICO/U.S. Virgin Island
International Automotive Distributor
Group, LLC. (Mazda de Puerto Rico)
P.O. Box 191850, San Juan, Puerto Rico
00919-1850
TEL: (787) 641-1777
qMEXICO
Mazda Motor de Mexico
Mario Pani # 150, PB Col. Lomas de
Santa Fe Mexico, D.F. C.P. 05300 Del.
Cuajimalpa
TEL: Center of Attention to Clients:
01 (800) 016 2932. in Mexico
qGUAM
Triple J Motors
157 South Marine Drive, Tamuning,
GUAM 96911 USA
P.O. Box 6066 Tamuning, Guam 96931
TEL: (671) 649-6555
9-13
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page404
Friday, July 10 2015 5:27 PM
Black plate (404,1)
Customer Information and Reporting Safety Defects
Warranty
Warranties for Your Mazda
l
l
l
l
l
New Vehicle Limited Warranty
Powertrain Limited Warranty
Safety Restraint System Limited Warranty
Anti-perforation Limited Warranty
Federal Emission Control Warranty/California Emission Control Warranty
Emission Defect Warranty
Emission Performance Warranty
Emission Control Warranty
Replacement Parts and Accessories Limited Warranty
Tire Warranty
l
l
l
l
l
NOTE
Warranty information varies depending on the country. Refer to the Warranty Booklet for detailed
warranty information.
9-14
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page405
Friday, July 10 2015 5:27 PM
Black plate (405,1)
Customer Information and Reporting Safety Defects
Warranty
Outside the United States
Government regulations in the United States require that automobiles meet specific
emission regulations and safety standards. Therefore, vehicles built for use in the United
States may differ from those sold in other countries.
The differences may make it difficult or even impossible for your vehicle to receive
satisfactory servicing in other countries. We strongly recommend that you NOT take your
Mazda outside the United States. However, in the event that you are moving to Canada
permanently, Mazda vehicles built for use in the United States could be eligible for
exportation to Canada with specific vehicle modifications to comply with the Canadian
Motor Vehicle Safety Standards (CMVSS).
NOTE
The above is applicable for a permanent import/export situation and not related to travelers on
vacation.
You may have the following problems if you do take your vehicle outside of the United
States:
l Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel will
affect vehicle performance and damage the emission controls and engine.
l Proper repair facilities, tools, testing equipment, and replacement parts may not be
available.
Please refer to your Manufacturer's Warranty Booklet for more information.
9-15
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page406
Friday, July 10 2015 5:27 PM
Black plate (406,1)
Customer Information and Reporting Safety Defects
Warranty
Outside Canada
Government regulations in Canada require that automobiles meet specific emission
regulations and safety regulations. Therefore, vehicles built for use in Canada may differ
from those sold in other countries.
The differences may make it difficult or even impossible for your vehicle to receive
satisfactory servicing in other countries. We strongly recommend that you NOT take your
Mazda outside Canada. However, in the event that you are moving to the United States
permanently, Mazda vehicles built for use in Canada could be eligible for exportation to the
United States with specific vehicle modifications to comply with the United States Federal
Motor Vehicle Safety Standards (FMVSS).
NOTE
The above is applicable for a permanent import/export situation and not related to travelers on
vacation.
You may have the following problems if you do take your vehicle outside of Canada:
l Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel will
affect vehicle performance and damage the emission controls and engine.
l Proper repair facilities, tools, testing equipment, and replacement parts may not be
available.
Please refer to your Manufacturer's Warranty Booklet for more information.
9-16
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page407
Friday, July 10 2015 5:27 PM
Black plate (407,1)
Customer Information and Reporting Safety Defects
Warranty
Registering Your Vehicle in A Foreign Country (Except
United States and Canada)
Registering your vehicle in a foreign country may be problematic depending on whether it
meets the specific emission and safety standards of the country in which the vehicle will be
driven. Consequently, your vehicle may require modifications at personal expense in order
to meet the regulations.
In addition, you should be aware of the following issues:
Satisfactory vehicle servicing may be difficult or impossible in another country.
The fuel specified for your vehicle may be unavailable.
Parts, servicing techniques, and tools necessary to maintain and repair your vehicle may be
unavailable.
There might not be an Authorized Mazda Dealer in the country you plan to take your
vehicle.
The Mazda warranty is valid only in certain countries.
9-17
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page408
Friday, July 10 2015 5:27 PM
Black plate (408,1)
Customer Information and Reporting Safety Defects
Warranty
Add-On Non-Genuine Parts and Accessories
Non-genuine parts and accessories for Mazda vehicles can be found in stores.
These may fit your vehicle, but they are not approved by Mazda for use with Mazda
vehicles. When you install non-genuine parts or accessories, they could affect your
vehicle's performance or safety systems; the Mazda warranty doesn't cover this. Before you
install any non-genuine parts or accessories, consult an Authorized Mazda Dealer.
WARNING
Always consult an Authorized Mazda Dealer before you install non-genuine parts or
accessories:
Improperly designed parts or accessories could seriously affect your vehicle's
performance or safety systems. This could cause you to have an accident or increase
your chances of injuries in an accident.
Be very careful in choosing and installing add-on electrical equipment, such as
mobile telephones, two-way radios, stereo systems, and car alarm systems:
Incorrectly choosing or installing improper add-on equipment or choosing an
improper installer is dangerous. Essential systems could be damaged, causing engine
stalling, air-bag (SRS) activation, ABS/TCS/DSC inactivation, or a fire in the vehicle.
Mazda assumes no responsibility for death, injury, or expenses that may result from the
installation of add-on non-genuine parts or accessories.
9-18
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page409
Friday, July 10 2015 5:27 PM
Black plate (409,1)
Customer Information and Reporting Safety Defects
Cell Phones
Cell Phones Warning
WARNING
Please comply with the legal regulations concerning the use of communication
equipment in vehicles in your State or Province:
Use of any electrical devices such as cell phones, computers, portable radios, vehicle
navigation or other devices by the driver while the vehicle is moving is dangerous.
Dialing a number on a cell phone while driving also ties-up the driver's hands. Use of
these devices will cause the driver to be distracted and could lead to a serious
accident. If a passenger is unable to use the device, pull off the right-of-way to a safe
area before use. If use of a cell phone is necessary despite this warning, use a handsfree system to at least leave the hands free to drive the vehicle. Never use a cell
phone or other electrical devices while the vehicle is moving and, instead,
concentrate on the full-time job of driving.
9-19
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page410
Friday, July 10 2015 5:27 PM
Black plate (410,1)
Customer Information and Reporting Safety Defects
Event Data Recorder
Event Data Recorder (U.S.A. and Canada)
This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR
is to record, in certain crash or near crash-like situations, such as an air bag deployment or
hitting a road obstacle, data that will assist in understanding how a vehicle’s systems
performed. The EDR is designed to record data related to vehicle dynamics and safety
systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is
designed to record such data as:
· How various systems in your vehicle were operating;
· Whether or not the driver and passenger safety belts were buckled/fastened;
· How far (if at all) the driver was depressing the accelerator and/or brake pedal; and,
· How fast the vehicle was traveling.
These data can help provide a better understanding of the circumstances in which crashes
and injuries occur.
NOTE:
EDR data are recorded by your vehicle only if a non-trivial crash or near crash-like
situation occurs; no data are recorded by the EDR under normal driving conditions and no
personal data (e.g., name, gender, age, and crash location) are recorded. However, other
parties, such as law enforcement, could combine the EDR data with the type of personally
identifying data routinely acquired during a crash investigation.
To read data recorded by an EDR, special equipment is required, and access to the vehicle
or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law
enforcement, that have the special equipment, can read the information if they have access
to the vehicle or the EDR.
Mazda will not disclose any of the data recorded in an EDR to a third party unless:
l A written agreement from the vehicle owner or the lessee is obtained
l Officially requested by the police or other law enforcement authorities
l Used as a defense for Mazda in a law suit, claim, or arbitration
l Ordered by a judge or court
However, if necessary Mazda will:
l Use the data for research on Mazda vehicle performance, including safety.
l Disclose the data or the summarized data to a third party for research purposes without
disclosing vehicle or owner identification information.
9-20
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page411
Friday, July 10 2015 5:27 PM
Black plate (411,1)
Customer Information and Reporting Safety Defects
Uniform Tire Quality Grading System (UTQGS)
Uniform Tire Quality Grading System (UTQGS)
This information relates to the tire grading system developed by the U.S. National
Highway Traffic Safety Administration for grading tires by tread wear, traction, and
temperature performance.
qTread Wear
The tread wear grade is a comparative rating based on the wear rate of the tire when tested
under controlled conditions on a specified government test course.
For example, a tire graded 150 would wear one-and-a-half times as well on the government
course as a tire graded 100.
The relative performance of tires depends upon the actual conditions of their use, however,
and may depart significantly from the norm because of variations in driving habits, service
practices and differences in road characteristics and climate.
qTraction-AA, A, B, C
The traction grades, from highest to lowest, are AA, A, B, and C. These grades represent
the tire's ability to stop on wet pavement as measured under controlled conditions on
specified government test surfaces of asphalt and concrete. A tire marked C may have poor
traction performance.
WARNING
The traction grade assigned to this tire is based on braking (straight ahead) traction
tests and does not include acceleration cornering (turning), hydroplaning, or peak
traction characteristics.
qTemperature-A, B, C
The temperature grades A (the highest), B, and C, represent the tire's resistance to the
generation of heat and its ability to dissipate heat when tested under controlled conditions
on a specified indoor laboratory test wheel.
Sustained high temperature can cause the material of the tire to degenerate and reduce tire
life, and excessive temperatures can lead to sudden tire failure.
Grade C corresponds to a level of performance which all passenger vehicle tires must meet
under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent
higher levels of performance on the laboratory test wheel than the minimum required by
law.
9-21
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page412
Friday, July 10 2015 5:27 PM
Black plate (412,1)
Customer Information and Reporting Safety Defects
Uniform Tire Quality Grading System (UTQGS)
WARNING
Keep your vehicle's tires properly inflated and not overloaded:
Driving with improperly inflated or overloaded tires is dangerous. Excessive speed,
underinflation, or excessive loading, either separately or in combination, can cause
heat buildup and possible tire failure. The temperature grade for this tire is
established for a tire that is properly inflated and not overloaded.
These grades will be added to the sidewalls of passenger vehicle tires over the next several
years according to a schedule established by the NHTSA and the tire manufacturers.
The grade of tires available as standard or optional equipment on Mazda vehicles may vary
with respect to grade.
ALL PASSENGER VEHICLE TIRES MUST CONFORM TO THESE GRADES AND
TO ALL OTHER FEDERAL TIRE-SAFETY REQUIREMENTS.
qUNIFORM TIRE QUALITY GRADING
Quality grades can be found where applicable on the tire sidewall between tread shoulder
and maximum section width.
For example:
TREADWEAR 200 TRACTION AA TEMPERATURE A
UTQGS MARK (example)
9-22
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page413
Friday, July 10 2015 5:27 PM
Black plate (413,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Tire Labeling
Federal law requires tire manufacturers to place standardized information on the sidewall of
all tires. This information identifies and describes the fundamental characteristics of the tire
and also provides a tire identification number for safety standard certification and in case of
a recall.
qInformation on Passenger Vehicle Tires
Please refer to the sample below.
1. TIN: U.S. DOT tire identification number
2. Passenger car tire
3. Nominal width of tire in millimeters
4. Ratio of height to width (aspect ratio)
5. Radial
6. Run-flat tire
7. Rim diameter code
8. Load index & speed symbol
9. Severe snow conditions
10. Tire ply composition and materials used
9-23
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page414
Friday, July 10 2015 5:27 PM
Black plate (414,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
11. Max. load rating
12. Tread wear, traction and temperature grades
13. Max. permissible inflation pressure
14. SAFETY WARNING
P215/65R15 95H is an example of a tire size and load index rating. Here is an explanation
of the various components of that tire size and load index rating. Note that the tire size and
load index rating may be different from the example.
P
Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designated
by the Tire and Rim Association (T&RA).
NOTE
If your tire size does not begin with a letter this may mean it is designated by either ETRTO
(European Tire and Rim Technical Organization) or JATMA (Japan Tire Manufacturing Association).
215
“215” is the nominal width of the tire in millimeters. This three-digit number gives the
width in millimeters of the tire from sidewall edge to sidewall edge. In general, the larger
the number, the wider the tire.
65
“65” is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.
R
“R” is the tire construction symbol. R indicates “Radial ply construction”.
15
“15” is the wheel rim diameter in inches.
95
“95” is the Load Index. This two-or three-digit number indicates how much weight each
tire can support.
9-24
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page415
Friday, July 10 2015 5:27 PM
Black plate (415,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
H
“H” is the speed rating. The speed rating denotes the maximum speed for which the use of
the tire is rated.
Letter Rating
Q
R
S
T
U
H
V
W
Y
Speed Rating
99 mph
106 mph
112 mph
118 mph
124 mph
130 mph
149 mph
168* mph
186* mph
* For tires with a maximum speed capability over 149 mph, tire manufacturers sometimes use the letters ZR. For
tires with a maximum speed capability over 186 mph, tire manufacturers always use the letters ZR.
M
S or M/S: Mud and Snow
AT: All Terrain.
AS: All Season. The “M
mud and snow.
S” or “M/S” indicates that the tire has some functional use in
U.S. DOT Tire Identification Number (TIN)
This begins with the letters “DOT” which indicates the tire meets all federal standards. The
next two numbers or letters are the plant code where it was manufactured, and the last four
numbers represent the week and year the tire was manufactured. For example, the numbers
457 means the 45st week of 1997. After 2000 the numbers go to four digits. For example,
the number 2102 means the 21th week of 2002. The other numbers are marketing codes
used at the manufacturer's discretion. This information is used to contact consumers if a tire
defect requires a recall.
Tire Ply Composition and Materials Used
The number of plies indicates the number of layers of rubber-coated fabric in the tire. In
general, the greater the number of plies, the more weight a tire can support. Tire
manufacturers also must indicate the tire materials, which include steel, nylon, polyester,
and other.
Maximum Load Rating
This number indicates the maximum load in kilograms and pounds that can be carried by
the tire.
Maximum Permissible Inflation Pressure
This number is the greatest amount of air pressure that should ever be put in the tire under
normal driving conditions.
9-25
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page416
Friday, July 10 2015 5:27 PM
Black plate (416,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Tread Wear, Traction and Temperature Grades
Tread wear: The tread wear grade is a comparative rating based on the wear rate of the tire
when tested under controlled conditions on a specified government test course. For
example, a tire graded 150 would wear one and one-half (1 1/2) times as well on the
government course as a tire graded 100.
Traction: The traction grades, from highest to lowest are AA, A, B, and C. The grades
represent the tire's ability to stop on wet pavement as measured under controlled conditions
on specified government test surfaces of asphalt and concrete. A tire marked C may have
poor traction performance.
Temperature: The temperature grades are A (the highest), B and C, representing the tire's
resistance to the generation of heat and its ability to dissipate heat when tested under
controlled conditions on a specified indoor laboratory test wheel.
Snow Tires
In some heavy snow areas, local governments may require true snow tires, those with very
deeply cut tread. These tires should only be used in pairs or placed on all four wheels.
Make sure you purchase snow tires that are the same size and construction type as the other
tires on your vehicle.
SAFETY WARNING
The following safety warning appears on the tire's sidewall.
SERIOUS INJURY MAY RESULT FROM:
l EXPLOSION OF TIRE/RIM ASSEMBLY DUE TO IMPROPER MOUNTINGMATCH TIRE DIAMETER TO RIM DIAMETER; NEVER EXCEED 40 psi (275 kPa)
TO SEAT BEADS-ONLY SPECIALLY TRAINED PERSONS SHOULD MOUNT
TIRES.
l TIRE FAILURE DUE TO UNDER-INFLATION/OVERLOADING/DAMAGEFOLLOW OWNER'S MANUAL AND PLACARD IN VEHICLE-FREQUENTLY
CHECK INFLATION PRESSURE AND INSPECT FOR DAMAGE.
9-26
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page417
Friday, July 10 2015 5:27 PM
Black plate (417,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
qInformation on Temporary Tires
Please refer to the sample below.
1. Temporary tires
2. Nominal width of tire in millimeters
3. Ratio of height to width (aspect ratio)
4. Diagonal
5. Rim diameter code
6. Load index & speed symbol
T115/70D16 90M is an example of a tire size and load index rating. Here is an explanation
of the various components of that tire size and load index rating. Note that the tire size and
load index rating may be different from the example.
T
Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designated
by the Tire and Rim Association (T&RA).
115
“115” is the nominal width of the tire in millimeters. This three-digit number gives the
width in millimeters of the tire from sidewall edge to sidewall edge. In general, the larger
the number, the wider the tire.
9-27
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page418
Friday, July 10 2015 5:27 PM
Black plate (418,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
70
“70” is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.
D
“D” is the tire construction symbol. D indicates “diagonal ply construction”.
16
“16” is the wheel rim diameter in inches.
90
“90” is the Load Index. This two-or three-digit number indicates how much weight each
tire can support.
M
“M” is the speed rating. The speed rating denotes the maximum speed for which the use of
the tire is rated.
Letter Rating
M
9-28
Form No.8FA7-EA-15G
Speed Rating
81 mph
Mazda5_8FA7-EA-15G_Edition2 Page419
Friday, July 10 2015 5:27 PM
Black plate (419,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Location of the Tire Label (Placard)
You will find the tire label containing tire inflation pressure by tire size and other important
information on the driver's side B-pillar or on the edge of the driver's door frame.
SAMPLE
qRecommended Tire Inflation Pressure
On the tire label you will find the recommended tire inflation pressure in both kPa and psi
for the tires installed as original equipment on the vehicle. It is very important that the
inflation pressure of the tires on your vehicle is maintained at the recommended pressure.
You should check the tire pressure regularly to insure that the proper inflation pressure is
maintained.
Refer to Tires on page 10-6.
NOTE
Tire pressures listed on the vehicle placard or tire information label indicate the recommended cold
tire inflation pressure, measured when the tires are cold, after the vehicle has been parked for at least
3 hours. As you drive, the temperature in the tire warms up, increasing the tire pressure.
9-29
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page420
Friday, July 10 2015 5:27 PM
Black plate (420,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
WARNING
Always check the tire inflation pressures on a regular basis according to the
recommended tire inflation pressure on the tire label and in conjunction with the
information in this owner's manual:
Driving your vehicle with under-inflated tires is dangerous.
Under-inflation is the most common cause of failures in any kind of tire and may
result in severe cracking, tread separation or “blowout”, with unexpected loss of
vehicle control and increased risk of injury. Under-inflation increases sidewall flexing
and rolling resistance, resulting in heat buildup and internal damage to the tire. It
results in unnecessary tire stress, irregular wear, loss of control and accidents. A tire
can lose up to half of its air pressure and not appear to be flat!
It is impossible to determine whether or not tires are properly inflated just by looking
at them.
qChecking Tire Pressure
1. When you check the air pressure, make sure the tires are cold ―meaning they are not
hot from driving even a mile.
2. Remove the cap from the valve on one tire.
3. Firmly press a tire gauge onto the valve.
4. Add air to achieve recommended air pressure.
5. If you overfill the tire, release air by pushing on the metal stem in the center of the
valve. Then recheck the pressure with your tire gauge.
6. Replace the valve cap.
7. Repeat with each tire, including the spare.
NOTE
Some spare tires require higher inflation pressure.
8. Visually inspect the tires to make sure there are no nails or other objects embedded that
could poke a hole in the tire and cause an air leak.
9. Check the sidewalls to make sure there are no gouges, cuts, bulges, cracks or other
irregularities.
NOTE
Warm tires normally exceed recommended pressures. Don't release air from warm tires to adjust the
pressure.
Under-inflation can cause serious failures and accidents.
Over-inflation can produce a harsh ride and the greater possibility of damage from road hazards.
9-30
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page421
Friday, July 10 2015 5:27 PM
Black plate (421,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
qGlossary of Terms
Tire Placard: A label indicating the OE tire sizes, recommended inflation pressure, and
the maximum weight the vehicle can carry.
Tire Identification Number (TIN): A number on the sidewall of each tire providing
information about the tire brand and manufacturing plant, tire size, and date of
manufacture.
Inflation Pressure: A measure of the amount of air in a tire.
kPa: Kilopascal, the metric unit for air pressure.
psi: Pounds per square inch, the English unit for air pressure.
B-pillar: The structural member at the side of the vehicle behind the front door.
Original Equipment (OE): Describes components originally equipped on the vehicle.
Vehicle Load Limit: The maximum value of the combination weight of occupants and
cargo.
Bead Area of the Tire: Area of the tire next to the rim.
Sidewall Area of the Tire: Area between the bead area and the tread.
Tread Area of the Tire: Area on the perimeter of the tire that contacts the road when it's
mounted on the vehicle.
Seating capacity means the total allowable number of vehicle occupants. Seating capacity
is described on the tire label.
Production options weight is the combination weight of installed regular production
options weighing over 2.3 kilograms in excess of the standard items which they replace,
and not previously considered in the curb weight or accessory weight, including heavy
duty brakes, ride levelers, roof rack, heavy duty battery, and special trim.
Rim is the metal support (wheel) for a tire or a tire and tube assembly upon which the tire
beads are seated.
9-31
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page422
Friday, July 10 2015 5:27 PM
Black plate (422,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Tire Maintenance
Improper or inadequate vehicle maintenance can cause tires to wear abnormally. Here are
some important maintenance points:
qTire Inflation Pressure
Inspect all tire pressure monthly (including the spare) when the tires are cold. Maintain
recommended pressures for the best ride, top handling, and minimum tire wear. Use the
pressures specified on the vehicle tire information placard or tire label for optimum service.
qTire Rotation
To equalize tread wear, rotate the tires every 12,000 km (7,500 miles) or sooner if irregular
wear develops. During rotation, inspect them for correct balance.
Forward
Do not include (TEMPORARY USE ONLY)
spare tire in rotation.
Inspect the tires for uneven wear and damage. Abnormal wear is usually caused by one or a
combination of the following:
l Incorrect tire pressure
l Improper wheel alignment
l Out-of-balance wheel
l Severe braking
After rotation, inflate all tire pressures to specification (page 10-6) and inspect the lug nuts
for tightness.
9-32
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page423
Friday, July 10 2015 5:27 PM
Black plate (423,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
CAUTION
Rotate unidirectional tires and radial tires that have an asymmetrical tread pattern
or studs only from front to rear, not from side to side. Tire performance will be
weakened if rotated from side to side.
(With limited-slip differential)
Don't use the following:
Ø Tires not of the designated size
Ø Tires of different sizes or types at the same time
Ø Tires not sufficiently inflated
If these instructions aren't followed, the rotation of the left and right wheels will be
different and will thus apply a constant load on the limited-slip differential.
This will cause a malfunction.
qReplacing a Tire
WARNING
Always use tires that are in good condition:
Driving with worn tires is dangerous. Reduced braking, steering, and traction could
result in an accident.
If a tire wears evenly, a wear indicator will appear as a solid band across the tread.
Replace the tire when this happens.
Tread wear indicator
New tread
Worn tread
You should replace the tire before the band crosses the entire tread.
9-33
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page424
Friday, July 10 2015 5:27 PM
Black plate (424,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
NOTE
Tires degrade over time, even when they are not being used on the road. It is recommended that tires
generally be replaced when they are 6 years or older. Heat caused by hot climates or frequent high
loading conditions can accelerate the aging process. You should replace the spare tire when you
replace the other road tires due to the aging of the spare tire. The period in which the tire was
manufactured (both week and year) is indicated by a 4-digit number.
Refer to Tire Labeling on page 9-23.
qSafety Practices
The way you drive has a great deal to do with your tire mileage and safety. So cultivate
good driving habits for your own benefit.
l Observe posted speed limits and drive at speeds that are safe for the existing weather
conditions
l Avoid fast starts, stops and turns
l Avoid potholes and objects on the road
l Do not run over curbs or hit the tire against the curb when parking
CAUTION
If you feel a sudden vibration or ride disturbance while driving or you suspect your
tire or vehicle has been damaged, immediately reduce your speed. Drive with caution
until you can safely pull off the road. Stop and inspect the tire for damage. If the tire
is under-inflated or damaged, deflate it, remove the tire and rim and replace it with
your spare tire. If you cannot detect a cause, have the vehicle towed to the nearest
vehicle or tire dealer to have the vehicle inspected.
9-34
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page425
Friday, July 10 2015 5:27 PM
Black plate (425,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Vehicle Loading
WARNING
Do not tow a trailer with this vehicle:
Towing a trailer with this vehicle is dangerous because it has not been designed to
tow a trailer and doing so will affect the drive system which could result in vehicle
damage.
This section will guide you in the proper loading of your vehicle, to keep your loaded
vehicle weight within its design rating capability. Properly loading your vehicle will
provide maximum return of vehicle design performance. Before loading your vehicle,
familiarize yourself with the following terms for determining your vehicle's weight ratings,
from the vehicle's Safety Certification Label and Tire and Load Information Label:
WARNING
Overloaded Vehicle:
Overloading a vehicle is dangerous. The results of overloading can have serious
consequences in terms of passenger safety. Too much weight on a vehicle's
suspension system can cause spring or shock absorber failure, brake failure,
handling or steering problems, irregular tire wear, tire failure or other damage.
Overloading makes a vehicle harder to drive and control. It also increases the
distance required for stopping. In cases of serious overloading, brakes can fail
completely, particularly on steep grades. The load a tire will carry safely is a
combination of the size of the tire, its load range, and corresponding inflation
pressure.
Never overload the vehicle and always observe the vehicle's weight ratings from the
vehicle's Safety Certification and Tire and Load Information labels.
9-35
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page426
Friday, July 10 2015 5:27 PM
Black plate (426,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Base Curb Weight is the weight of the vehicle including a full tank of fuel and all
standard equipment. It does not include passengers, cargo, or optional equipment.
Vehicle Curb Weight is the weight of your new vehicle when you picked it up from your
dealer plus any aftermarket equipment.
PAYLOAD
Payload is the combination weight of cargo and passengers that the vehicle is designed to
carry. The maximum payload for your vehicle can be found on the Tire and Load
Information label on the driver's door frame or door pillar. Look for “THE
COMBINATION WEIGHT OF OCCUPANTS AND CARGO SHOULD NEVER
EXCEED XXX kg or XXX lbs” for your maximum payload. The payload listed on the tire
label is the maximum payload for the vehicle as built by the assembly plant. If any
aftermarket or dealer installed equipment has been installed on the vehicle, the weight of
the equipment must be subtracted from the payload listed on the tire label in order to be
accurate.
9-36
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page427
Friday, July 10 2015 5:27 PM
Black plate (427,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
SAMPLE
CARGO
Cargo Weight includes all weight added to the Base Curb Weight, including cargo and
optional equipment.
The cargo weight limit decreases depending on the number of vehicle occupants. The cargo
weight limit can be calculated by subtracting the total weight of the vehicle occupants from
the “combination weight of occupants and cargo should never exceed” value on the tire
label.
9-37
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page428
Friday, July 10 2015 5:27 PM
Black plate (428,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Examples: Based on a single occupant weight of 68 kg (150 lbs), and a value of 385 kg
(849 lbs) for the “combination weight of occupants and cargo should never exceed”:
The cargo weight limit with one occupant is 385 kg (849 lbs) _ 68 kg (150 lbs) = 317 kg
(699 lbs)
The cargo weight limit with two occupants is 385 kg (849 lbs) _ (68 × 2) kg ( (150 × 2)
lbs) = 249 kg (549 lbs)
If the weight of the occupant increases, the cargo weight limit decreases by that much.
GAW (Gross Axle Weight) is the total weight placed on each axle (front and rear) including vehicle curb weight and all payload.
GAWR (Gross Axle Weight Rating) is the maximum allowable weight that can be carried
by a single axle (front or rear). These numbers are shown on the Safety Compliance
Certification Label located on the driver's door frame or door pillar. The total load on
each axle must never exceed its GAWR.
GVW
GVW (Gross Vehicle Weight) is the Vehicle Curb Weight
cargo
passengers.
GVWR (Gross Vehicle Weight Rating) is the maximum allowable weight of the fully
loaded vehicle (including all options, equipment, passengers and cargo). The GVWR is
shown on the Safety Compliance Certification Label located on the driver's door
frame or door pillar. The GVW must never exceed the GVWR.
9-38
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page429
Friday, July 10 2015 5:27 PM
Black plate (429,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
SAMPLE
WARNING
Exceeding Axle Weight Rating Limits:
Exceeding the Safety Certification Label axle weight rating limits is dangerous and
could result in death or serious injury as a result of substandard vehicle handling,
performance, engine, transmission and/or structural damage, serious damage to the
vehicle, or loss of control.
Always keep the vehicle within the axle weight rating limits.
Do not tow a trailer with this vehicle:
Towing a trailer with this vehicle is dangerous because it has not been designed to
tow a trailer and doing so will affect the drive system which could result in vehicle
damage.
9-39
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page430
Friday, July 10 2015 5:27 PM
Black plate (430,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
GCW
GCW (Gross Combination Weight) is the weight of the loaded vehicle (GVW).
GCWR (Gross Combination Weight Rating) is the maximum allowable weight of the
vehicle - including all cargo and passengers - that the vehicle can handle without risking
damage. The GCW must never exceed the GCWR.
WARNING
Exceeding GVWR or GAWR Specifications:
Exceeding the GVWR or the GAWR specified on the certification label is dangerous.
Exceeding any vehicle rating limitation could result in a serious accident, injury, or
damage to the vehicle.
Do not use replacement tires with lower load carrying capacities than the originals
because they may lower the vehicle's GVWR and GAWR limitations. Replacement
tires with a higher limit than the originals do not increase the GVWR and GAWR
limitations.
Never exceed the GVWR or the GAWR specified on the certification label.
9-40
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page431
Friday, July 10 2015 5:27 PM
Black plate (431,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Steps for Determining the Correct Load Limit
Steps for Determining Correct Load Limit(1) Locate the statement “The combined weight of occupants and cargo should
never exceed XXX kg or XXX lbs.” on your vehicle's placard.
(2) Determine the combined weight of the driver and passengers that will be
riding in your vehicle.
(3) Subtract the combined weight of the driver and passengers from XXX kg
or XXX lbs.
(4) The resulting figure equals the available amount of cargo and luggage load
capacity. For example, if the “XXX” amount equals 1400 lbs. and there
will be five 150 lb passengers in your vehicle, the amount of available
cargo and luggage load capacity is 650 lbs. (1400 _ 750 (5 × 150) = 650
lbs.)
(5) Determine the combined weight of luggage and cargo being loaded on the
vehicle. That weight may not safely exceed the available cargo and luggage
load capacity calculated in Step 4.
(6) If your vehicle will be towing a trailer, load from your trailer will be
transferred to your vehicle. Consult this manual to determine how this
reduces the available cargo and luggage load capacity of your vehicle.
9-41
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page432
Friday, July 10 2015 5:27 PM
Black plate (432,1)
Customer Information and Reporting Safety Defects
Reporting Safety Defects
Reporting Safety Defects (U.S.A.)
If you believe that your vehicle has a defect which could cause a crash or could
cause injury or death, you should immediately inform the National Highway
Traffic Safety Administration (NHTSA) in addition to notifying Mazda Motor
Corporation (Your Mazda Importer/Distributor).
If NHTSA receives similar complaints, it may open an investigation, and if it
finds that a safety defect exists in a group of vehicles, it may order a recall and
remedy campaign. However, NHTSA cannot become involved in individual
problems between you, your dealer, or Mazda Motor Corporation (Your Mazda
Importer/Distributor).
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888327-4236 (TTY:1-800-424-9153); go to http://www.safercar.gov; or write to:
Administrator, NHTSA, 1200 New Jersey Avenue, SE., Washington, DC,
20590. You can also obtain other information about motor vehicle safety from
http://www.safercar.gov.
NOTE
If you live in the U.S.A., all correspondence to Mazda Motor Corporation should be forwarded to:
Mazda North American Operations
7755 Irvine Center Drive
Irvine, California 92618-2922
or
P.O. Box 19734
Irvine, CA 92623-9734
Customer Experience Center or toll free at 1 (800) 222-5500
If you live outside of the U.S.A., please contact the nearest Mazda Distributor shown (page 9-13) in
this booklet.
9-42
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page433
Friday, July 10 2015 5:27 PM
Black plate (433,1)
Customer Information and Reporting Safety Defects
Reporting Safety Defects
Reporting Safety Defects (Canada)
Canadian customers who wish to report a safety-related defect to Transport Canada, Defect
Investigations and Recalls, may telephone the toll free hotline 1-800-333-0510, or contact
Transport Canada by mail at: Transport Canada, ASFAD, Place de Ville Tower C, 330
Sparks Street, Ottawa ON K1A 0N5.
For additional road safety information, please visit the Road Safety website at:
http://www.tc.gc.ca/roadsafety/menu.htm
9-43
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page434
Friday, July 10 2015 5:27 PM
9-44
Form No.8FA7-EA-15G
Black plate (434,1)
Mazda5_8FA7-EA-15G_Edition2 Page435
Friday, July 10 2015 5:27 PM
10
Black plate (435,1)
Specifications
Technical information about your Mazda.
Identification Numbers ............................................................... 10-2
Vehicle Information Labels ..................................................... 10-2
Specifications ............................................................................... 10-4
Specifications .......................................................................... 10-4
Personalization Features ............................................................ 10-8
Personalization Features .......................................................... 10-8
10-1
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page436
Friday, July 10 2015 5:27 PM
Black plate (436,1)
Identification Numbers
Vehicle Information Labels
qChassis Number
qVehicle Identification Number
The vehicle identification number legally
identifies your vehicle. The number is on
a plate attached to the cowl panel located
on the left corner of the dashboard. This
plate can easily be seen through the
windshield.
qVehicle Emission Control
Information Label í
qMotor Vehicle Safety Standard
Label í
qTire Pressure Label
10-2
í
Some models.
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page437
Friday, July 10 2015 5:27 PM
Black plate (437,1)
Identification Numbers
qEngine Number
Forward
10-3
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page438
Friday, July 10 2015 5:27 PM
Black plate (438,1)
Specifications
Specifications
qEngine
Item
Type
Bore × Stroke
Displacement
Compression ratio
Specification
DOHC-16V in-line, 4-cylinder
89.0 × 100 mm (3.50 × 3.94 in)
2,488.5 ml (2,488.5 cc)
9.7
qElectrical System
Item
Battery
Spark-plug number
Classification
12V-60Ah/20HR or 12V-65Ah/20HR
Mazda Genuine spark
LFJD-18-110 or L3Y2-18-110
plug
CAUTION
When cleaning the iridium plugs, do not use a wire brush. The fine particulate
coating on the iridium alloy and platinum tips could be damaged.
qLubricant Quality
Lubricant
Engine oil
Manual transaxle oil
Automatic transaxle fluid
Power steering fluid
Brake/Clutch fluid
Classification
Refer to Recommended Oil on page 8-11.
API Service
GL-4
SAE
75W-80
Mazda Genuine ATF M-V
Mazda Genuine ATF M-III , M-V, or equivalent
(e.g. Dexron® II)
SAE J1703 or FMVSS116 DOT-3
NOTE
Refer to Introduction on (page 8-2) for owner's responsibility in protecting your investment.
10-4
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page439
Friday, July 10 2015 5:27 PM
Black plate (439,1)
Specifications
qCapacities
(Approximate Quantities)
Item
With oil filter replacement
Engine oil
Without oil filter replacement
Manual transaxle
U.S.A. and
Canada
Coolant
Automatic transaxle
Except U.S.A. and Canada
Manual transaxle oil
Automatic transaxle fluid
Fuel tank
Capacity
5.0 L (5.3 US qt, 4.4 Imp qt)
4.6 L (4.9 US qt, 4.0 Imp qt)
6.7 L (7.1 US qt, 5.9 Imp qt)
6.6 L (7.0 US qt, 5.8 Imp qt)
6.8 L (7.2 US qt, 6.0 Imp qt)
2.85 L (3.01 US qt, 2.51 Imp qt)
8.14 L (8.60 US qt, 7.16 Imp qt)
60.0 L (15.9 US gal, 13.2 Imp gal)
Check oil and fluid levels with dipsticks or reservoir gauges.
qDimensions
Item
Vehicle specification
4,585 mm (180.5 in)
1,750 mm (68.9 in)
1,615 mm (63.6 in)
1,530 mm (60.2 in)
1,520 mm (59.8 in)
2,750 mm (108.3 in)
Overall length
Overall width
Overall height
Front tread
Rear tread
Wheelbase
qWeights
(Manual transaxle)
Item
GVWR (Gross Vehicle Weight Rating)
GAWR (Gross Axle Weight Rating)
Front
Rear
Weight
2,091 kg (4,610 lb)
1,021 kg (2,251 lb)
1,085 kg (2,392 lb)
Front
Rear
Weight
2,125 kg (4,685 lb)
1,056 kg (2,328 lb)
1,084 kg (2,390 lb)
(Automatic transaxle)
Item
GVWR (Gross Vehicle Weight Rating)
GAWR (Gross Axle Weight Rating)
10-5
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page440
Friday, July 10 2015 5:27 PM
Black plate (440,1)
Specifications
qAir Conditioner
Item
Classification
HFC134a (R-134a)
Refrigerant Type
qLight Bulbs
Exterior light
Category
Light bulb
High beam
Headlights
Low beam
Halogen
Xenon fusion
Front turn signal lights/Parking lights
(Front side-marker lights)
Fog lights í
Side turn signal lights í
High-mount brake light
Rear turn signal lights
Brake lights/Taillights (Rear side-marker lights)
Reverse lights
License plate lights
Wattage
65
55
35
UNECE*1 (SAE)
HB3 (9005)
H11 (H11)
D2S (D2S)
27/8
― (1157NA)
55
LED*2
LED*2
21
21/5
21
5
H11 (H11)
― (―)
― (―)
WY21W (7443NA)
W21/5W (7443)
W21W (7440)
W5W (―)
*1 UNECE stands for United Nations Economic Commission for Europe.
*2 LED is the abbreviation for Light Emitting Diode.
Interior light
Light bulb
Luggage compartment light
Overhead lights (Front)/Map lights
Overhead light (Rear)
Category
Wattage
8
5
10
UNECE*1
―
W5W
―
*1 UNECE stands for United Nations Economic Commission for Europe.
qTires
NOTE
The tires have been optimally matched with the chassis of your vehicle.
When replacing tires, Mazda recommends that you replace tires of the same type originally fitted to
your vehicle. For details, contact an Authorized Mazda Dealer.
10-6
í
Some models.
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page441
Friday, July 10 2015 5:27 PM
Black plate (441,1)
Specifications
Check the tire pressure label for tire size and inflation pressure.
Refer to Tire Inflation Pressure on page 8-28.
Standard tire
Tire size
P205/55R16 89H
205/50R17 89V
Inflation pressure
Front
240 kPa (35 psi)
230 kPa (34 psi)
Rear
240 kPa (35 psi)
230 kPa (34 psi)
Temporary tire
Tire size
T125/70D16 96M
Inflation pressure
420 kPa (60 psi)
Lug nut tightening torque
When installing a tire, tighten the lug nut to the following torque.
88―118 N·m (9―12 kgf·m, 65―87 ft·lbf)
qFuses
Refer to Fuses on page 8-42.
10-7
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page442
Friday, July 10 2015 5:27 PM
Black plate (442,1)
Personalization Features
Personalization Features
The following “Personalization Features” are available. These settings can only be changed by an Authorized
Mazda Dealer.
Item
Key reminder
warning alarm
Lights-on reminder
warning alarm
Turn indicator
Feature
Factory Setting
The volume of the key reminder warning alarm
High
can be changed
The volume of the lights-on reminder warning
High
alarm can be changed
The beep volume level can be changed
High
The time required for the interior lamp to turn
off automatically after all the doors are closed
15 seconds
can be changed
The time required for the interior lamp to
illuminate after unlocking any door can be
30 seconds
changed
The function that allows the interior lamp to
illuminate automatically when the doors are
Activated
Illumination entry
unlocked can be changed
The function allowing the interior lamp to turn
off automatically when any door is opened
Activated
(or not securely closed) can be changed
The time required for the interior lamp to turn
off automatically can be changed
30 minutes
(prevents battery depletion when a door is
open/ajar)
The unlocking method using the retractable key
Press × 2
can be changed
The time required for the doors to relock
automatically after unlocking with the
30 seconds
transmitter can be changed
Keyless entry
The flashing of the hazard warning lights when
Activated
the doors are locked/unlocked can be changed
The function allowing the horn to sound
automatically when the doors are locked by
Activated
pressing the transmitter two times consecutively
can be changed
Standard
The headlight illumination on/off timing based
(Illuminates under
Auto headlight on/off on surrounding lightness/darkness can be
average levels of
changed
darkness)
Two-step down
The two-step down power window function can
Activated
power window
be changed
10-8
Form No.8FA7-EA-15G
Available Settings
Low
Low/Deactivated
Low/Deactivated
7.5/30/60 seconds
7.5/15/60 seconds
Deactivated
Deactivated
10/60 minutes
Press × 1
60/90 seconds
Deactivated
Deactivated
Earlier/
Somewhat earlier/
Somewhat later/
Later
Deactivated
Mazda5_8FA7-EA-15G_Edition2 Page443
Friday, July 10 2015 5:27 PM
11
Black plate (443,1)
Index
11-1
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page444
Friday, July 10 2015 5:27 PM
Black plate (444,1)
Index
A
B
Accessory Socket ............................ 6-109
Add-On Non-Genuine Parts and
Accessories ....................................... 9-18
Air Bag Systems ............................... 2-47
Ambient Temperature Display .......... 6-96
Antenna ............................................. 6-11
Anti-Lock Brake System (ABS) ......... 5-8
Warning light ............................... 5-8
Appearance Care ............................... 8-48
Audio System .................................... 6-11
Audio control switch .................. 6-47
Audio set .................................... 6-23
AUX/USB/iPod Mode ............... 6-50
Operating tips for audio
system ........................................ 6-12
Safety certification ..................... 6-59
Automatic Transaxle
Driving tips ................................ 5-19
Fluid ........................................... 8-16
Manual shift mode ..................... 5-15
Shift-lock override ..................... 5-14
Shift-lock system ....................... 5-14
Transaxle ranges ........................ 5-13
Before Starting the Engine .................. 4-5
After getting in ............................. 4-5
Before getting in .......................... 4-5
Bluetooth® Audio ............................ 6-60
Bluetooth® Hands-Free .................... 6-70
Basic Bluetooth® Hands-Free
operation .................................... 6-74
Convenient use of the hands-free
system ........................................ 6-79
Hands-free setting ...................... 6-85
Mazda Bluetooth® Hands-Free
customer service ......................... 6-92
Safety certification ..................... 6-92
When Bluetooth® Hands-Free cannot
be used ....................................... 6-91
Body Lubrication .............................. 8-18
Bottle Holder ................................... 6-101
Brake/Clutch
Fluid ........................................... 8-15
Brakes
Anti-lock brake system (ABS) ..... 5-8
Brakes assist ................................. 5-9
Foot brake .................................... 5-5
Parking brake ............................... 5-6
Warning light ............................... 5-7
Break-In Period ................................... 4-6
Bulb Replacement ............................. 8-34
B
Battery
Emergency starting .................... 7-16
Maintenance ............................... 8-23
Replacement ............................... 8-27
Specifications ............................. 10-4
Beep Sounds
Ignition key reminder ................. 5-58
Lights-on reminder ..................... 5-58
Seat belt warning ........................ 5-58
Tire inflation pressure warning ... 5-58
11-2
Form No.8FA7-EA-15G
C
Capacities .......................................... 10-5
Carbon Monoxide ............................... 4-4
Cargo Securing Loops .................... 6-107
Cargo Sub-Compartment ................ 6-107
Catalytic Converter ............................. 4-3
Cell Phones ....................................... 9-19
Center Console ................................ 6-104
Mazda5_8FA7-EA-15G_Edition2 Page445
Friday, July 10 2015 5:27 PM
Black plate (445,1)
Index
C
D
Child Restraint
Child restraint precautions ......... 2-31
Child-restraint system installation
position ...................................... 2-36
Installing child-restraint
systems ....................................... 2-37
LATCH child-restraint
systems ....................................... 2-44
Child Safety Locks for Rear Doors ... 3-13
Climate Control System ...................... 6-2
Gas specifications ...................... 10-6
Clock ................................................. 6-96
Cruise Control ................................... 5-21
Cup Holder ...................................... 6-100
Customer Assistance ........................... 9-2
Dynamic Stability Control (DSC) ..... 5-25
DSC OFF indicator light ............ 5-26
DSC OFF switch ........................ 5-26
TCS/DSC indicator light ............ 5-26
D
Dashboard Illumination .................... 5-43
Daytime Running Lights ................... 5-63
Defogger
Mirror ......................................... 5-69
Rear window .............................. 5-69
Dimensions ....................................... 10-5
Door Locks ......................................... 3-9
Driving In Flooded Area ................... 4-10
Driving on Uneven Road .................. 4-11
Driving Tips ........................................ 4-6
Automatic transaxle ................... 5-19
Break-in period ............................ 4-6
Driving in flooded area .............. 4-10
Driving on uneven road .............. 4-11
Hazardous driving ........................ 4-7
Rocking the vehicle ...................... 4-8
Saving fuel and protection of the
environment ................................. 4-6
Winter driving .............................. 4-8
E
Emergency Starting ........................... 7-16
Flooded engine ........................... 7-16
Jump-starting .............................. 7-17
Push-starting .............................. 7-21
Emergency Towing ........................... 7-22
Emission Control System .................... 4-3
Engine
Coolant ....................................... 8-13
Exhaust gas .................................. 4-4
Hood release .............................. 3-21
Oil .............................................. 8-11
Overheating ................................ 7-14
Engine Compartment Overview ........ 8-10
Engine Coolant
Overheating ................................ 7-14
Event Data Recorder ......................... 9-20
Exhaust Gas ........................................ 4-4
Exterior Care ..................................... 8-50
F
Flasher
Hazard warning .......................... 5-70
Headlights .................................. 5-59
Flat Tire ............................................... 7-3
Changing ...................................... 7-7
Spare tire and tool storage ............ 7-3
Fluids
Classification .............................. 10-4
Owner maintenance ..................... 8-7
Fog Lights ......................................... 5-64
11-3
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page446
Friday, July 10 2015 5:27 PM
Black plate (446,1)
Index
F
I
Foot Brake .......................................... 5-5
Front Seats .......................................... 2-2
Fuel
Filler lid and cap ........................ 3-20
Gauge ......................................... 5-42
Requirements ............................... 4-2
Tank capacity ............................. 10-5
Fuses ................................................. 8-42
Panel description ........................ 8-45
Replacement ............................... 8-42
Indicator Lights ................................. 5-44
Cruise ......................................... 5-55
DSC OFF .................................... 5-55
Headlight high-beam .................. 5-54
Low engine coolant
temperature ................................ 5-55
Power steering malfunction ........ 5-56
Security ...................................... 5-54
Shift position .............................. 5-54
TCS/DSC ................................... 5-55
Turn signal/hazard warning ........ 5-56
Information Display .......................... 6-95
Ambient temperature display ..... 6-96
Audio display ............................. 6-96
Climate control display .............. 6-96
Clock .......................................... 6-96
Information display functions .... 6-95
Trip computer ............................. 6-97
Instrument Cluster ............................. 5-40
Interior Care ...................................... 8-55
Interior Lights ................................... 6-93
G
Gauges .............................................. 5-40
Glove Compartment ........................ 6-104
H
Hazard Warning Flasher .................... 5-70
Hazardous Driving .............................. 4-7
Head Restraint .................................. 2-15
Headlights
Control ....................................... 5-59
Flashing ...................................... 5-62
High-low beam .......................... 5-62
Leveling ..................................... 5-62
On reminder ............................... 5-62
Hood Release .................................... 3-21
Horn .................................................. 5-70
I
Ignition
Keys ............................................. 3-2
Switch .......................................... 5-2
Illuminated Entry System ................. 6-93
Immobilizer System .......................... 3-25
11-4
Form No.8FA7-EA-15G
J
Jump-Starting .................................... 7-17
K
Keyless Entry System ......................... 3-3
Keys .................................................... 3-2
L
Label Information ............................. 10-2
Lane-Change Signals ........................ 5-63
Liftgate .............................................. 3-14
Mazda5_8FA7-EA-15G_Edition2 Page447
Friday, July 10 2015 5:27 PM
Black plate (447,1)
Index
L
P
Light Bulbs
Replacement ............................... 8-34
Specifications ............................. 10-6
Lighting Control ............................... 5-59
Lubricant Quality .............................. 10-4
Luggage Compartment Light ............ 6-94
Parking Sensor System ..................... 5-34
Park assist sensor switch ............ 5-36
Parking sensor warning beep ..... 5-38
Sensor detection range ............... 5-36
Personalization Features ................... 10-8
Power Door Locks ............................ 3-11
Power Steering .................................. 5-20
Fluid ........................................... 8-15
Power steering malfunction indicator
light ............................................ 5-20
Power Windows ................................ 3-17
Push-Starting ..................................... 7-21
M
Maintenance
Introduction .................................. 8-2
Owner maintenance precautions... 8-8
Owner maintenance schedule ....... 8-7
Scheduled ..................................... 8-4
Manual Transaxle Operation ............. 5-10
Recommendations for shifting.... 5-11
Map Lights ........................................ 6-94
Meters and Gauges ........................... 5-40
Mirror Defogger ................................ 5-69
Mirrors
Outside mirrors .......................... 3-32
Rearview mirror ......................... 3-33
Moonroof .......................................... 3-23
O
Odometer and Trip Meter .................. 5-41
Outside Mirrors ................................. 3-32
Overhead Lights ................................ 6-94
Overheating ....................................... 7-14
Overloading ...................................... 4-10
R
Rear Coat Hooks ............................. 6-108
Rear Door Child Safety Locks .......... 3-13
Rear Window Defogger .................... 5-69
Rear Window Washer ....................... 5-68
Rear Window Wiper .......................... 5-68
Rearview Mirror ................................ 3-33
Recreational Towing ......................... 7-25
Registering Your Vehicle in A Foreign
Country ............................................. 9-17
Rocking the Vehicle ............................ 4-8
S
Safety Defects, Reporting ................. 9-42
Saving Fuel and Protection of the
Environment ....................................... 4-6
P
Paint Damage .................................... 8-48
Parking Brake ..................................... 5-6
Parking in an Emergency .................... 7-2
11-5
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page448
Friday, July 10 2015 5:27 PM
Black plate (448,1)
Index
S
S
Seat Belt System
3-point type ................................ 2-23
Automatic locking ...................... 2-22
Emergency locking .................... 2-21
Extender ..................................... 2-28
Pregnant women ........................ 2-21
Pretensioner and load limiting .... 2-25
Seat belt precautions .................. 2-19
Seat belt reminder ....................... 2-30
Warning light ............................. 2-29
Seats
Front seat ...................................... 2-2
Head restraint ............................. 2-15
Seat arrangements ...................... 2-13
Seat warmer ................................ 2-17
Second-row seats ......................... 2-5
Third-row seat ............................ 2-10
Second-Row Seats .............................. 2-5
Security System
Immobilizer system .................... 3-25
Theft-deterrent system ............... 3-29
Spare Tire and Tool Storage ................ 7-3
Specifications .................................... 10-4
Speedometer ...................................... 5-41
SRS Air Bags
Driver and front passenger occupant
classification system .................. 2-62
How the SRS air bags work ....... 2-55
Limitations to SRS air bag ......... 2-60
Monitoring and maintenance ..... 2-67
SRS air bag deployment
criteria ........................................ 2-59
SRS Air Bags
Supplemental restraint system
(SRS) precautions ...................... 2-47
SRS Air Bags
Supplemental restraint system
components ................................ 2-53
Steering Wheel .................................. 3-32
Horn ........................................... 5-70
Storage Box .................................... 6-105
Storage Compartments .................... 6-102
Cargo securing loops ................ 6-107
Cargo sub-compartment ........... 6-107
Center console .......................... 6-104
Glove compartment .................. 6-104
Rear coat hooks ........................ 6-108
Storage box .............................. 6-105
Underseat storage ..................... 6-104
Sunshade ........................................... 3-24
Sunvisors .......................................... 6-93
11-6
Form No.8FA7-EA-15G
T
Tachometer ........................................ 5-42
Temporary Spare Tire ....................... 8-30
Theft-Deterrent System ..................... 3-29
Third-Row Seat ................................. 2-10
Tiedown
Hook .......................................... 7-23
Tire Information ................................ 9-23
Tire Pressure Monitoring System ...... 5-28
System error activation .............. 5-32
Tire pressure monitoring system
warning light .............................. 5-30
Tires and wheels ......................... 5-32
Mazda5_8FA7-EA-15G_Edition2 Page449
Friday, July 10 2015 5:28 PM
Black plate (449,1)
Index
T
W
Tires
Flat tire ......................................... 7-3
Inflation pressure ........................ 8-28
Replacement ............................... 8-30
Rotation ...................................... 8-29
Snow tires .................................... 4-9
Spare tire and tool storage ............ 7-3
Specifications ............................. 10-6
Tire chains .................................... 4-9
Uniform tire quality grading system
(UTQGS) ................................... 9-21
Tool ..................................................... 7-3
Towing
Description ................................. 7-22
Emergency towing ..................... 7-22
Hook .......................................... 7-23
Recreational towing ................... 7-25
Trailer towing ............................. 4-12
Traction Control System (TCS) ........ 5-24
TCS/DSC indicator light ............ 5-25
Trailer Towing .................................. 4-12
Trip Meter ......................................... 5-41
Turn and Lane-Change Signals ......... 5-63
Warning Lights ................................. 5-44
ABS ............................................ 5-47
Air bag system ........................... 5-50
Automatic transaxle ................... 5-51
Brake system .............................. 5-46
Charging system ......................... 5-48
Check engine .............................. 5-49
Check fuel cap ........................... 5-50
Door-ajar .................................... 5-51
Engine oil pressure ..................... 5-48
Front seat belt pretensioner
system ........................................ 5-50
High engine coolant
temperature ................................ 5-49
Low fuel ..................................... 5-50
Low washer fluid level ............... 5-51
Malfunction ................................ 5-47
Seat belt ...................................... 5-51
Tire pressure monitoring
system ........................................ 5-52
Warranty ............................................ 9-14
Washer Fluid ..................................... 8-17
Weights ............................................. 10-5
Wheel Replacement .......................... 8-31
Windows
Power windows .......................... 3-17
Windshield Washer ........................... 5-68
Windshield Wipers ............................ 5-65
Blades replacement .................... 8-19
Winter Driving .................................... 4-8
U
Underseat Storage ........................... 6-104
V
Vanity Mirrors ................................... 6-93
Vehicle Information Labels ............... 10-2
11-7
Form No.8FA7-EA-15G
Mazda5_8FA7-EA-15G_Edition2 Page450
Friday, July 10 2015 5:28 PM
11-8
Form No.8FA7-EA-15G
Black plate (450,1)
Download PDF

advertising