CML_ Warming Cabinets Manual RV03.FH10

C2RT includes the 2-tiered warming cabinet plus two 4.3 quart stainless steam
pans with one clear polypropylene rolltop lid.
6. Stainless steam pans may be used in an oven, but NOT the lids!!!
7. Food placed on warming base or in steam pans should be fully cooked and already
hot. Warming Cabinet is designed for keep-warm function only. To retain heat
and moisture in foods, keep lid(s) on steam pans when not serving.
8. Foods containing little or no liquid should be kept warm on Low setting, and
stirred periodically.
9. If using the unit as a regular warming tray/cabinet without the steam pans,
be sure to use containers that are heat-proof. Note: The base is not designed
to keep large, deep pots full of food or liquid warm.
Suggestions for Use:
-Warming tray base is ideal for placing shallow pans right out of the oven to
keep foods warm and ready to serve.
-Keep entrees warm while preparing other foods or for serving from.
-Warm plates before serving hot foods on them.
Warming Cabinets
Keep plates, dishes, casseroles, etc. warm
until you're & ready to serve
Use & Care Manual
Models CMLW-C & CMLB-CSLP & CMLB-C2RT
CARE AND CLEANING
Before initial use and after each subsequent use, wash removable parts in warm
sudsy water, rinse and dry. The Buffet Server clear lids and the warming Cabinet glass
doors are top-rack dishwasher safe.The most effective and safe way to clean the
warming tray base is with a mild detergent and a soft moist cloth. Do not use any
scouring agents! DO NOT SUBMERGE THE WARMING BASE OR LET THE HEAT
CONTROL COME IN CONTACT WITH WATER.
If there is any food residue remaining on the surface, it should be removed after
each use. To do so, scrub gently with a fine cleansing pad such as nylon mesh or
other ordinary cleansing pad. DO NOT USE STEEL WOOL OR ABRASIVE
KITCHEN CLEANERS. To polish, use a non-abrasive glass cleaner. Any food residue
remaining can be whisked away with a gentle stroke of a nylon mesh pad. Rinse and
wipe dry. Do not allow water to spill or seep into frame.
Model CMLB-C2RT
Warming Cabinet
with Buffet Server
with Low Profile Roll-top Lid
Model CMLB-CSLP
Warming Cabinet
with
Mid-Size Buffet Server
(plates not included)
WARRANTY
Cadco warrants that this Warming Cabinet be free from defects in material and workmanship
for a period of one year from date of purchase. (Warranty provides repair of unit.) A copy of your
original purchase receipt is required for proof of purchase date. This warranty does not cover
consequential damage of any kind or damages resulting from accident, misuse, abuse, or external
service or repair attempts by unauthorized personnel. Inquiries concerning this warranty and the
use and maintenance of this unit should be directed to Cadco, Ltd.
Please note: This Model is a carry-in service item; customer is responsible for packaging
the unit securely and returning it to Cadco* for service, along with a copy of your original
purchase receipt, a description of the problem, and your name, shipping address and phone
number. Ship to: Cadco, Ltd., Attn: REPAIR, 200 International Way, Winsted, CT 06098. If shipping
the unit for service, we recommend that you insure it for its original purchase price. Cadco is not
responsible for damage or loss of unit in transit to us.
Call Cadco at 860-738-2500 for Return Authorization Number BEFORE returning any
item for repair. Return Authorization Number MUST be written on outside of carton to track
the unit and avoid service delays. Warranty covers repairing the unit and returning it to
customer.
Warranty is applicable only in USA and Canada*. (*Canadian customers contact Tarrison
Products, LTD, Ltd. in Ontario, Tel. (905) 825-9665.)
4
11/1/2016 RV03
Model CMLW-C
Warming Cabinet
with Mid-Size Warming Tray
(plates not included)
600 Watts / 5 amps / 120 Volts / 60 Hz
Cadco, Ltd.
200 International Way, Winsted, CT 06098
860-738-2500 l Fax 860-738-9772
E-mail: info@cadco-ltd.com l Website: www.cadco-ltd.com
We recommend that you record the following information for warranty
purposes: Model #________
Purchase Date:_____________Retailer:_________________________
Congratulations on your purchase of a Cadco Warming Cabinet!
IMPORTANT SAFEGUARDS
To reduce the risk of personal injury or property damage when using
electrical appliances, basic safety precautions should always be followed,
including the following:
1. READ ALL INSTRUCTIONS BEFORE USE.
2. Do not touch hot surfaces! Always use hot pads or pot holders until unit cools.
3. To protect against electrical shock, do not immerse tray base, cord or plug
in water or other liquid.
4. Close supervision is necessary when any appliance is used by or near children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool
completely before putting on or taking off parts, and before cleaning or storing
the appliance.
6. Do not operate any appliance with a damaged cord or plug or after
the appliance malfunctions or has been damaged in any manner.
Return the appliance to the Cadco Factory Service Department
(call 860-738-2500 first) for examination, repair or adjustment.
7. The use of accessory attachments not recommended by the appliance
manufacturer may cause injuries.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner or in a heated oven.
11. It is recommended that this appliance not be moved when it contains hot oil
or other hot liquid.
12. Do not clean with metal scouring pads. They can scratch and ruin the
finish of your unit.
13. Do not use appliance for other than intended use.
14. DO NOT USE PLASTIC DISHES OR PLASTIC WRAP ON TRAY .
SAVE THESE INSTRUCTIONS
NOTE: A short power supply cord (or cord set) has been provided to reduce
the hazards resulting from becoming entangled in or tripping over a longer cord.
Longer cord sets or extension cords may be used if care is properly exercised
in their use. If a long cord set or extension cord is used, the marked electrical
rating of the cord set or extension cord should be at least as great as the electrical
rating of the appliance. The longer cord should be arranged so that it will not
drape over the counter top or table top where it can be pulled on by children or
tripped over accidentally.
The high-tech warming surface will remain unblemished for a long time with
appropriate care. The warming surface and high-grade, long-life stainless steam
pans allow for an attractive alternative for keeping appetizers and other foods warm.
For best results use nylon, plastic, wooden or rubber utensils. Metal utensils may
be used with care but should not be used to cut food on the cooking surfaces.
2
HOW TO USE
Before using for the first time, become familiar with the Warming Cabinet
features, Figs. C-D). Wash removable parts in warm sudsy water, rinse and dry.
Clean the warming cabinet base with a mild detergent and a soft moist cloth.
Do not use any scouring agents! DO NOT SUBMERGE THE WARMING BASE
OR LET THE PLUG COME IN CONTACT WITH WATER. Rinse and wipe dry.
Do not allow water to spill or seep into the frame.
Door Assembly
(reverse to remove
door for cleaning)
1
Warming Cabinet
(base of CMLB-CSLP)
(also sold separately
Utensil slot
as CMLW-C)
Top level functions
as Warming Tray
Buffet Server (CMLB-CSLP)
3 Steam Pans and 3 Lids Included
2
Fig. A
3
Fig. B
4
Steam
Pan
Holder
Glass Doors
Fingerhole
Fig. C
Variable
Thermostat
Knobs
Fig. D
Door Assembly:
1. (These models are shipped with the doors unassembled, to prevent breakage
during shipment.) Hold the left door on an angle with fingerhole to the left. (Fig.
A.) Raise the top edge of the door to fit into the top door channel inside the front
cabinet overhang. Then straighten the door and allow the lower edge to drop into
the bottom door channel. Repeat with the right door (Fig. B), holding it so the
fingerhole is to the right. Reverse the procedure to remove doors for cleaning.
Initial Use:
Heat the warming cabinet base without foods on it for approximately 10
minutes at maximum setting in order to seal the special coating. Temporary
smoking is normal during initial use.
Subsequent Use:
1. Each level is equipped with a separate variable thermostat knob. Levels may
be operated at different temperatures simultaneously. Heat range is from 155
to 205 F, to keep foods at serving temperatures. For best results, use maximum
heat setting to quickly reach your desired temperature, then adjust to desired
temperature. Set heat level by turning the knob so that the desired knob
marking lines up with the signal light.
2. The light will come on only during heat cycle. Due to the low wattage necessary
for warming trays, it can be 20-30 minutes before the light cycles off.
3. You may use the unit either fully assembled with steam pans, (Fig. C) or use
the warming base alone as a warming cabinet (Fig. D).
4. If using steam pans, place the steam pan holder on the warming base before
placing the steam pans in place.
5. Model CMLW-C is the 2-tiered warming cabinet only. Model CMLB-CSLP
includes the 2-tiered warming cabinet plus three stainless steam pans with
clear lids: one 2.6 quart pan & two 4.3 quart pans. The 2.6 quart pan will hold
up to 25 four ounce servings; the 4.3 quart pans each hold up to 40 four ounce
servings. The clear polypropylene individual lids have utensil slots. Model CMLB0
0
3
Download PDF