ITEM NO.
_______________________
AR-7E
ELECTRIC ROTISSERIE
Operating at only 8.3 kilowatts, the Alto-Shaam
rotisserie with EcoSmart™ technology uses very little
electricity to cook a full load of delicious food.
●
●
●
●
●
●
●
●
AR-7E SHOWN WITH DOUBLE PANE,
CURVED GLASS DOORS AND OPTIONAL
●
NON-CONTROL SIDE PASS-THROUGH DOOR
●
●
Temperature-dropping hold mode further saves on
energy costs.
Solid stainless steel back prevents further heat loss.
Cook and hold in a single, counter-top rotisserie that
features a combination of convection and radiant heat.
A choice of one or two cooking stages for an improved
finished product.
Solid state electronic control has a clear, easy-to-read LED
display to cook by time and features an automatic
temperature reduction to a holding mode where product
can remain until needed.
Programmable control option with a seven program
memory for both the cooking and holding function.
The rotisserie can be stacked with an identical rotisserie
oven or with a matching holding cabinet.
Interior drip strips channel drippings into a bottom drip
pan for convenient removal.
Spits, rotating disks, drip strips are also removable for
easy cleaning.
Interior lighting is recessed to protect from breakage.
The Alto-Shaam electric rotisserie is constructed of a heavy gauge, non-magnetic stainless steel with a sealed cooking chamber
for heat retention. Low-e glass on front includes a handle with magnetic door latch. Spit rotation is controlled by one (1) 1/2 hp
motorized disk that provides an incremental rotation jog and automatic stop when door is opened. The cook temperature range
is from 250° to 425°F (121° to 218°C). Additional electronic control features include temperature display in Fahrenheit or
Celsius; a product hold key with a temperature range of 140° to 210°F (60° to 99°C), cooking set-points from 1 minute to 4
hours; and emergency stop. The rotisserie has a stainless steel exterior finish and is furnished with 4-inch legs.
■ MODEL AR-7E: Electric Rotisserie Oven, Single pane, flat door, solid back
■ MODEL AR-7E: Electric Rotisserie Oven, Double pane, curved glass, solid back
FACTORY INSTALLED OPTIONS
■ Deluxe programmable control lets the operator
set up to seven cooking programs for both
cooking and holding functions.
ANSI/NSF 4
●
●
■ Single pane, flat glass door
Panel Color Choices
➥Specify color choice:
■ Stainless Steel, standard
■ Black, optional
■ Burgundy, optional
■ Custom Color, optional
ADDITIONAL FEATURES
Reach-in compartment is standard.
➥Specify pass-through
design as a special order.
■ Double pane, curved glass door
●
• Multipurpose wire basket option handles
irregular size products, denser items, or heavier
products that require additional support.
Right-hand door swing is standard
■ Specify left-hand door as a special order
■ Ventless Hood
( NOT AVAILABLE
ON TWO STACKED ROTISSERIES )
• Optional handle on non-control side for
pass-through use.
• Stackable options available.
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE :
PRINTED IN U.S.A.
262.251.3800
800.558.8744 U . S . A ./ CANADA
FAX :
www.alto-shaam.com
262.251.7067
800.329.8744 U . S . A .
D U E T O O N G O I N G P R O D U C T I M P R O V E M E N T , S P E C I F I C AT I O N S A R E S U B J E C T T O C H A N G E W I T H O U T N O T I C E .
ONLY
#52 - 01/09
WITH PASS-THROUGH OPTION
ELECTRIC ROTISSERIE
NOTE
—
2" (51mm) rubber feet add 2-1/8" (54mm)
( FOR COUNTER TOP UNITS ONLY )
4" (102mm) legs add 4-3/8" (111mm)
5" (127mm) casters add 6-3/8" (162mm)
6" (152mm) legs add 6-3/8" (162mm)
●
●
●
●
32-7/16" (824mm)
EXTERIOR :
40-3/16" x 38-1/16" x 32"
(1020mm x 966mm x 813mm)
EXTERIOR :
40-3/16" x 38-1/16" x 32-1/16"
(1020mm x 966mm x 814mm)
CLEARAN C E REQ U IREM ENTS
WEIGH T
NET: 361 lb (164 kg)
SHIP : 540 lb (245 kg)
CRATE DIMENSIONS : (H x W x D)
49" X 50" X 45" EST. (1245mm x 1270mm x 1143mm)
208
230
240
208
230
240
380-415
PHASE
1
1
1
3
3
3
3
#52 - 01/09
262.251.3800
38-3/16" (970mm)
FRONT VIEW
32-7/16" (824mm)
CYCLE / HZ
60
60
60
60
60
60
50/60
SIDE VIEW - DOUBLE PANE ,
CURVED DOOR , SOLID BACK
PASS - THROUGH EXTERIOR ( OPTION ) :
40-3/16" x 38-1/16" x 32-7/16"
(1020mm x 966mm x 824mm)
PASS - THROUGH EXTERIOR ( OPTION ) :
40-3/16" x 38-1/16" x 34-1/2"
(1020mm x 966mm x 876mm)
AMPS
40.0
42.0
38.0
33.0/ph
35.0/ph
32.0/ph
24.0/ph
MAX
KW
8.3
9.0
8.8
8.3
9.0
8.8
8.8
MAX
BARE END
NO PLUG
BARE END
NO PLUG
NO CORD
NO PLUG
PRODUCT CAPACITY
98 lb (44 kg) MAXIMUM
ANGLED SPITS ( STANDARD ):
Up to twenty-one (21) 3-1/2 lb chickens (1,6 kg)
Up to twenty-eight (28) 2-1/2 to 3 lb chickens (1,1 to 1,4 kg)
PIERCING SPITS ( OPTIONAL ):
Up to twenty-eight (28) 2-1/2 to 3-1/2 lb chickens (1,1 to 1,6 kg)
TURKEY SPIT ( OPTIONAL ):
One (1) Turkey up to 25 lb (11 kg)
800.558.8744 U . S . A ./ CANADA
FAX :
www.alto-shaam.com
262.251.7067
D U E T O O N G O I N G P R O D U C T I M P R O V E M E N T , S P E C I F I C AT I O N S A R E S U B J E C T T O C H A N G E W I T H O U T N O T I C E .
800.329.8744 U . S . A .
PRINTED IN U.S.A.
ONLY
40-3/16" (1020mm)
38-3/16" (970mm)
4-3/8" (111mm)
38-3/16" (970mm)
40-3/16" (1020mm)
25-7/16" (646mm)
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE :
40-3/16" (1020mm)
38-1/16" (966mm)
32-7/16"
37-1/8"(824mm)
(942mm)
4-3/8" (111mm)
40-3/16" (1020mm)
4-3/8" (111mm)
35-13/16" (909mm)
38-7/8" (859mm)
WITH PASS-THROUGH OPTION88-11-/16"
88-11-/16" (2252mm)
SINGLE PANE , FLAT GLASS
VOLTAGE
25-7
50-5/16"
(516mm)
DIMENSIO NS: H x W x D
ELECTRICAL
38-3/16" (970mm)
WITH SOLID BACK
58-3/4" (1492mm)
57-1/16" (1449mm)
35-13/16" (909mm)
38-7/8" (859mm)
50-5/16"
(516mm)
4-3/8" (111mm)
WITH SOLID BACK
61-3/16" (1554mm) WITH PASS-THROUGH OPTION
Electrical Connection
40-3/16" (1020mm)
35-13/16" (909mm)
4-3/8" (111mm)
38-7/8" (859mm)
38-3/16" (970mm)
(2252mm)
61-3/16" (1554mm) WITH PASS-THROUGH OPTION
58-3/4" (1492mm)
57-1/16" (1449mm)
38-3/16" (970mm)
4-3/8" (111mm)
WITH PASS-THROUGH OPTION
38-1/16" (966mm)
37-1/8" (942mm)
DOUBLE PANE , CURVED GLASS
Oven must be installed level.
Exhaust ventilation is required
Install on a non-combustible surface only
The oven must not be installed in any area where
it may be affected by steam, grease, dripping
water, high temperatures, or any other severely
adverse conditions.
In order to maintain NSF standards, counter models
must be sealed at the bottom by an NSF approved
sealant or equipped with 4" (102mm) legs.
6" (152mm) left, right, and rear sides
88-11-/16" (2252mm)
61-3/16" (1554mm) WITH PASS-THROUGH OPTION
30-3/8" (722mm)
25-1/2" (649mm)
CE ONLY
INSTA L LATIO N REQ U IREM EN TS
●
Steam Vent
at top
at base of unit
32-7/16" (824mm)
WITH SOLID BACK
WITH SOLID BACK
32-1/16" (814 mm)
CL
38-1/16" (966mm)
37-1/8" (942mm)
25-7/16" (646mm)
PASS-THROUGH OPTION
WITH FLAT DOOR
HEIGHT DIMENSION VARIANCE :
Electrical Connection
at base of unit
38-1/16" (966mm)
37-1/8" (942mm)
58-3/4" (1492mm)
Electrical Connection
at base of unit
CURVED DOOR
40-3/16" (1020mm)
WITH SOLID BACK
30-3/8" (722mm)
25-1/2" (649mm)
34-1/2" (876 mm)
32-1/16" (814 mm)
CL
35-13/16" (909mm)
38-7/8" (859mm)
WITH PASS-THROUGH OPTION
Vent
AR-7ESteam
at WITH
top
57-1/16" (1449mm)
CL
34-1/2" (876 mm)
Steam Vent
at top
59-3/16" (1504mm) WITH
WITH SOLID BACK
30-3/8" (722mm)
25-1/2" (649mm)
32-1/16" (814 mm)
34-1/2" (876 mm)
AR-7E
WITH PASS-THROUGH OPTION
PASS-THROUGH OPTION
WITH PASS-THROUGH OPTION
PASS-THROUGH OPTION
88-3/4" (2255mm)
Electrical Connection
at base of unit
57-1/16" (1449mm)
CL
58-3/4" (1492mm) WITH SOLID BACK
25-1/2" (649mm)
Steam Vent
at top
30-3/8" (722mm)
32" (813mm) WITH SOLID BACK
32-7/16" (824mm)
WITH PASS-THROUGH OPTION
PASS-THROUGH OPTION
WITH PASS-THROUGH OPTION
PASS-THROUGH OPTION
AR-7E
ELECTRIC ROTISSERIE
STA N DARD ACC ES S O RIES
●
●
Seven (7) removable stainless steel angled spits
●
One (1) removable stainless steel drip pan with drain, 2" (51mm) deep
OPTIO N S & ACC ES S ORIES
■ CASTERS, 5" (127mm)
NOT AVAILABLE WITH VENTLESS HOOD STACKED UNITS
DOOR OPTIONS
■
■
SINGLE PANE FLAT GLASS WITH HANDLE
SINGLE PANE FLAT GLASS WITHOUT HANDLE
■ DOOR HANDLE,
■ DRIP PAN,
STAINLESS STEEL
DRIP PAN TRAY,
■
NON - CONTROL SIDE
DOOR MOUNTED
FOR COUNTER TOP UNITS ONLY
LEGS
■ 4" (102mm)
■ 6" (152mm)
■ 6" (152mm)
5007012
5007013
HD-26900
1001976
CE ONLY
ASSEMBLY
ASSEMBLY
ASSEMBLY, FLANGED FEET
REQUIRED FOR STACKING UNITS .
1002598
5001614
5001765
5001414
5001761
■ MULTI-PURPOSE WIRE BASKET (.50 dia. pin) BS-26019
Two (2) removable stainless steel angled drip strips
Six (6) 20 watt recessed bulbs
SPITS
■
5004859
FLAT GLASS DOOR
■ CURVED GLASS DOOR
■ FEET, RUBBER, 2" (51mm)
4007
●
AR-7E
ANGLED SPIT, STAINLESS STEEL
SI-25934
TURKEY SPIT, STAINLESS STEEL
SI-26980
PIERCING SPIT, STAINLESS STEEL
■
■
SI-25729
ANGLED SPIT, TEFLON COATED
■
STACKING ASSEMBLY ( FACTORY
INSTALLED )
■ AR-7E
OVER
AR-7E (208-240V, 1PH)
■ AR-7E
OVER
AR-7H (208-240V, 3PH)
■ AR-7E
■ AR-7E
OVER
OVER
5008787
AR-7H (380-415V)
5008922
OPEN
(AR-7E
OVER
750-S)
5002058
TEFLON COATED ACCESSORIES ®
COMMERCIAL GRADE
INCLUDES DISKS , DRIP TRAY AND
■
5008948
FR-26550
WITH STORAGE SHELF
■
5006291
AR-7H (208-240V, 1PH)
STAND, STAINLESS STEEL
■
5001335
7
ANGLED SPITS
5001302
AR-7VH ventless hood over AR-7E rotisserie
S TA C KIN G COM BINATION S ( FACTORY
INSTALLED )
Requires 4" (102mm) legs for counter top applications. Free standing floor
installations require 6" (152mm) leg assembly 5001414 or 5" (127mm) casters 4007.
( OVERALL
HEIGHT :
54-7/16")
AR-7E rotisserie over AR-7E rotisserie
Requires 6" (152mm) leg assembly 5001414 or 5" (127mm) casters 4007
and stacking assembly 5006291 for applications within the United States.
Applications outside the U.S. requires 6" (152mm) legs with flanged feet 5001761
bolted to th e floor.
( OVERALL
HEIGHT :
76-7/8")
AR-7E rotisserie over AR-7H companion holding cabinet
Requires 6" (152mm) leg assembly 5001414 or 5" (127mm) casters 4007 and
stacking assembly (5008787, 5008948 or 5008922 - depending on voltage - see list
above) for applications within the United States. Applications outside the U.S.
requires 6" (152mm) legs with flanged feet 5001761 bolted to the floor.
STACKING COMBINATION
AR-7VH VENTLESS HOOD OVER
AR-7E ROTISSERIE
( OVERALL
HEIGHT :
76-7/8")
AR-7VH ventless hood over AR-7E rotisserie over AR-7H companion holding cabinet
Requires 6" (152mm) legs with flanged feet 5001761 bolted to the floor.
( OVERALL
HEIGHT :
90-13/16")
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE :
PRINTED IN U.S.A.
262.251.3800
800.558.8744 U . S . A ./ CANADA
FAX :
www.alto-shaam.com
262.251.7067
800.329.8744 U . S . A .
D U E T O O N G O I N G P R O D U C T I M P R O V E M E N T , S P E C I F I C AT I O N S A R E S U B J E C T T O C H A N G E W I T H O U T N O T I C E .
ONLY
#52 - 01/09
AR-7VH
AR-7VH
ROTISSERIE VENTLESS HOOD
AR-7VH
WITH CURVED DOOR
WITH FLAT DOOR
56-1/2" (1434mm)
FLAT GLASS
EXTERIOR :
58-13/16" (1494mm)
DIMEN SIO N S: H x W x D
16" x 37-1/8" x 27-7/8"
(404mm x 942mm x 707mm)
ELECTRIC A L
VOLTAGE
208-240
PHASE
1
CURVED GLASS
16" x 37-1/8" x 29-9/16"
(404mm x 942mm x 750mm)
50/60
kW
1.0
.2
INS TAL L ATIO N REQ U IREM EN TS
FACTORY INSTALLATION ONLY
The ventless hood must not be installed in any area where
it may be affected by steam, grease, dripping water, high
temperatures, or any other severely adverse conditions.
( NOT AVAILABLE ON TWO STACKED ROTISSERIES )
OPTION S & AC C ESS O RIES
Replacement Filters
■ Grease Filter
■ Charcoal Filter
FI-25867
FI-25866
PASS - THROUGH EXTERIOR : ( OPTION )
16" x 37-1/8" x 33-5/8"
(404mm x 942mm x 853mm)
A IR M OVEMENT
530 cf m ( 1 5m 3 )
CLEARAN CE REQUIREMENTS
6" (152mm) at top, back and both sides
WEIGHT
NET :
SHIP :
120 lb (54 kg)
175 lb (79 kg)
ADDITIONAL SHIP WEIGHT
FACTORY INSTALLED OVER
CRATE DIMENSIONS :
(H x W x D)
62"
X
AR-7E
50"
X
ROTISSERIE
45"
EST.
(1575mm x 1270mm x 1143mm)
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE :
#52 - 01/09
262.251.3800
WITH PASS-THROUGH OPTION
WITH SOLID BACK
PASS - THROUGH EXTERIOR : ( OPTION ) EXTERIOR :
AMPS
87-7/16" (2221mm)
27-7/8" (707mm)
WITH BACK
SOLID BACK
WITH SOLID
CYCLE/HZ
WITH SOLID BACK
SIDE VIEW
29-9/16"
(750mm)
29-9/16"
(750mm)
16" x 37-1/8" x 30-1/4"
(404mm x 942mm x 767mm)
WITH PASS-THROUGH OPTION
56-1/2" (1434mm)
30-1/4" (767mm)
WITH PASS-THROUGH OPTION
16" (404mm)
SIDE VIEW
58-13/16" (1494mm)
16"(404mm)
25-1/2" (646mm)
WITH SOLID BACK
27-7/8" (707mm)
30-1/4" (767mm)
WITH PASS-THROUGH OPTION
WITH PASS-THROUGH OPTION
88-7/16" (2246mm)
WITH SOLID BACK
57" (1447mm)
37-1/8" (942mm)
33-5/8"33-5/8"
(853mm)
(853mm)
WITH PASS-THROUGH
OPTIONOPTION
WITH
PASS-THROUGH
37-1/8"
(942mm)
16"(404mm)
WITH SOLID BACK
FRONT VIEW
WITH PASS-THROUGH OPTION
37-1/8"37-1/8"
(942mm)
(942mm)
16"(404mm)
NSF4 - 2002
WITH PASS-THROUGH OPTION
WITH PASS-THROUGH OPTION
88-7/16" (2246mm)
WITH PASS-THROUGH OPTION
(2246mm)
57" (1447mm) 88-7/16"
WITH SOLID
BACK
61" (1549mm)
WITH PASS-THROUGH OPTION
PASS-THROUGH OPTION
1P35
ALSO CLASSIFIED BY
UNDERWRITERS
LABORATORIES INC.®
IN ACCORDANCE WITH
87-7/16" (2221mm)
LISTED
COOKING APPLIANCE
WITH INTEGRAL SYSTEMS
FOR LIMITING THE EMISSION
OF GREASE LADEN AIR
WITH PASS-THROUGH OPTION
AR-7VH VENTLESS H O O D
INSTALLED DIRECTLY ON THE TOP OF
ELECTRIC ROTISSERIE MODEL AR-7E
PASS-THROUGH OPTION
61" (1549mm)
25-1/2" (646mm)
WITH SOLID BACK
33-5/8" (853mm)
WITH PASS-THROUGH OPTION
29-9/16" (750mm)
PASS-THROUGH OPTION
800.558.8744 U . S . A ./ CANADA
FAX :
www.alto-shaam.com
262.251.7067
D U E T O O N G O I N G P R O D U C T I M P R O V E M E N T , S P E C I F I C AT I O N S A R E S U B J E C T T O C H A N G E W I T H O U T N O T I C E .
800.329.8744 U . S . A .
PRINTED IN U.S.A.
ONLY
33-5/
WITH PASS-
29-9/16
WITH SO