Purity Clean
/Clean Extra
Remove elements causing limescale,
marks and streaks from mains water
The Purity Clean can be used to partially demineralise
water. It should be applied where carbonate hardness
level is high and the removal of other minerals is not
required. With the Purity Clean Extra the result is
a fully demineralised water for use where a reduction
in ­quality can occur due to an additional high mineral
content in the water. As a guideline, for an evaluation of
the ­additional mineral content in decarbonized water, the
conductivity can be used (measured in μS/cm).
Opt for clean. Opt for green.
Environmental protection and recycling are
part of the BRITA corporate philosophy.
­BRITA e
­ stablished a recycling programme
for e
­ xhausted filter cartridges. Since 1992 all parts of
­BRITA cartridges can be completely reprocessed
so that the materials can be recycled.
The benefits to you
st
an
te
bn
iss
e
iBypas
tell
s
In
Kon
• PURITY Clean: glasses, white crockery and cutlery look
clean and unmarked – without any hand polishing
• PURITY Clean Extra: sparkling glasses, gleaming white
crockery, and cutlery without streaks and marks for the
highest demands without any hand polishing
• Limescale deposits in the machine are prevented – the
machines run longer without loss of efficiency
• Repair and service costs are clearly reduced
• Easy handling due to the PURITY replacement cartridge
system
• Particularly suited to hot water applications (up to 60 °C)
F ilte re r
ge
Quality and safety
33
2
Carbonate hardness reduction
The level of carbonate hardness is reduced. As a result,
unwanted limescale formation is prevented. With the
integrated activated carbon, unwanted taste and aroma
elements, such as chlorine, are also reduced.
55
3
Permanent hardness reduction
(only PURITY 1200 Clean EXTRA)
This stage eliminates permanent hardness and the
non-hardness causing minerals (cations).
ur
ey
ne
our be
Simple to use
Operation is simpler and easier than ever.
44
Purity 1200
Clean
.
Maximum product safety
For uninterrupted operation and safe use.
ts
22
fi
22
Optimum water quality
Outstanding and consistent water quality.
r repla
you
ce
.
ent
m
11
c
11
d
Se
Pre-filtration
1
A fleece at the inlet retains coarse particles and, with its
water distribution system, ensures a high utilisation of
the downstream filter medium.
Rem
in
Systematic filter technology
The food safety of BRITA Professional water filter products is tested and
monitored by independent institutes.
55
Purity 1200
Clean EXTRA
The illustration serves as
­explanation of the filter
­technology. It is not to scale.
tested*
*applies to all materials in contact with water
4 Anion reduction (only PURITY 1200 Clean EXTRA)
This filter medium removes the remaining ions (anions).
5
Fine filtration
At the end of the filtration process, another fleece retains
fine particles.
Technology
PURITY 1200 Clean
PURITY 1200 Clean Extra
partial demineralisation
total demineralisation
12,000 l
5,000 l
Capacity at a carbonate hardness of 10 °dH (0 % bypass)
1
Max. operating pressure
6 bar
6 bar
Water intake temperature
4 – 60 °C
4 – 60 °C
Flow at 1 bar pressure loss
850 l / h
850 l / h
Nominal flow
300 l / h
300 l / h
Pressure loss at nominal flow
Dimensions (height / width)
0.45 bar
0.45 bar
550 / 288 mm
550 / 288 mm
18 / 24 kg
18 / 24 kg
Weight (dry / wet)
Connections (input/output)
Operating position
G 1“ / G 3 / 4“
G 1“ / G 3 / 4“
horizontal and vertical
horizontal and vertical
Order number
New filter (complete system with filter cartridge)
292083
1008200
Replacement cartridge
315645
1008197
Accessories
Order number
BRITA FlowMeter 100 – 700 A
298905
Total hardness test kit (for Purity 1200 Clean EXTRA)
536754
Carbonate hardness test kit (for Purity 1200 Clean)
710800
Appropriate hoses and hose sets from our comprehensive FlexConnect range as well as other accessories can be found in our price list.
Recommended guidelines for the use of complete demineralisation (conductivity*)
Total demineralisation
Conductivity*
Glasses
< 300 µS / cm
> 300 µS / cm
Cutlery
< 80 µS / cm
> 80 µS / cm
generally
not necessary
Crockery
* Approximate values (with carbonate hardness 0 °dH)
Explanatory notes
The capacities given have been tested and calculated on the basis of normal application and machine conditions.
Due to external influences (e.g. variations in raw water quality and/or machine type), deviations from these results can occur.
1
Only drinking quality water may be used as the water supply for BRITA water filters.
FOR MORE INFORMATION, CONTACT:
BRITA GmbH
Heinrich-Hertz-Straße 4
65232 Taunusstein
Germany
Tel.: +49 6128 746-5765
Fax: +49 6128 746-5010
professional@brita.net
www.professional.brita.net
BRITA Water Filter Systems Ltd.
BRITA House | 9 Granville Way
Bicester | Oxfordshire OX26 4JT
Great Britain
Tel.: +44 844 742-4990
Fax: +44 844 742-4902
clientservices@brita.co.uk
www.brita.co.uk
filter Management app
Download our free of charge BRITA Professional
­FilterManager app and get a reminder for your next filter
exchange – ­automatically, wherever you are.
For smartphone and tablets.
For more information please visit:
professional.brita.net/app
PN: 1022162-006a seitenwind.com 03/16 Errors and omissions excepted.
Partial demineralisation
Download PDF