TEU2LN Series
High-Efficiency Urinal EcoPower® Flushometer Valve, 0.5 gpf
FEATURES
ED
• Hydropower self-generating system
• Electronic flushometer valve complete with 3/4"
angle stop and 1-1/4" or 3/4" vacuum breaker set
• 0.5 gpf or less
• Back spud - concealed 14"x 12" Cover plate
• 12 hour automatic flush for trap seal protection
MODELS
IN
T
TEU2LN11#SS (3/4" Vacuum breaker)
Back spud, Satin finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB13RB-11
• 3/4" Angle stop - 10077t6
• 3/4" Vacuum breaker - 10075t6
• Outlet tube - TH559EDV171
• Sweat solder kit - SJ1
U
TEU2LN#SS
Valve only, Surface mount, Satin finish
C
O
N
TEU2LN21#SS (1-1/4" Vacuum breaker)
Back spud, Satin finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB13RB-21
• 3/4" Angle stop - 10077t6
• 1-1/4" Vacuum breaker - 10075t7
• Outlet tube - TH559EDV172
• Sweat solder kit - SJ1
IS
Optional Part:
Z-4000-J - Adapter for ground joint angle stops
COLORS/FINISHES
D
• #SS Stainless Steel Satin finish
CODES/STANDARDS
• Meets or exceeds ASSE 1037, CSA B125.3
• Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
• ADA compliant
Piston Valve
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Automatic infrared sensor activated, urinal flush valve.
Heavy-duty 14"x12" stainless steel coverplate with
satin finish. Vandal resistant hex head screws. Lower
water consumption of 0.5 gallon per flush. Automatic
sensor adjustment on installation. Manual override
button incorporated. Piston valve with stainless steel
self cleaning debris screen and solenoid with self
cleaning mechanism. Automatic flush every twelve
hours if not used. Angle stop and vacuum breaker
included with accessories. Electrical sensor separated
from valve and sealed in waterproof compartment.
Through the use of TOTO's EcoPower® Flush Valves,
using the valve 30 flushes per day will fully recharge
the valve for up to 10 years.
TEU2LN Series
High-Efficiency Urinal EcoPower® Flushometer Valve, 0.5 gpf
SPECIFICATIONS
•
•
INSTALLATION NOTES
Warranty
Material
Three Year Warranty
The recommended installation for the urinal
Bronze casting with
flushometer valve is to have a 7" (178mm) minimum
stainless steel finish
space in wall.
Power Supply
Hydropower self-generating
system
Water Supply
3/4" NPT
Detection time
Factory setting at six (6)
seconds minimum
Detection range
Self-adjusting to environment
Discharge quantity
Preset to 0.5 gpf / 2.4 lpf
Urinal type
Low consumption wash down
and jetted flush design urinals
Operating temperature 32°-104°F (0°-40°C)
Supply water pressure 15 psi - 125 psi*
Trap seal protection
Automatically flushes once
after twelve (12) hours of
non-use
•
ED
•
•
U
•
•
•
IN
•
•
•
O
N
T
These specifications are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Check your local plumbing code for details.
RECOMMENDED INSTALLATION
C
DIAGRAM
11-15/16”
Back Spud 1-1/4”
IS
13-1/2”
Finished wall
Opening in wall
D
Opening in wall
OVERRIDE
5-1/8” BUTTON
LOCATION
3-13/16”
SENSOR
LOCATION
Dimensions: Inch
Back Spud 3/4”
Finished wall
2-3/8”
2-3/8”
Supply
4-3/4”*
Supply
of Supply
and sensor
16”
16”
16”
(distance from Spud Hole to both
of Supply and Sensor)
Top of the Urinal
Solder joint
Urinal
*+/- 1/2”
Urinal
3-3/4”
3-3/4”
Back spud (ø1-5/16”)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00094, v.06
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ♻
Download PDF