ACCESSORIES INSTRUCTION
MEASUREMENT
BEFORE INSTALLATION
TM
MODEL NO.
Duro
363TB-18
Towel bar
363TB-24
Towel bar
363DTB-18
Towel bar
363DTB-24
Towel bar
363TS-22
Towel shelf
363TR
Towel ring
363RH
Robe hook
363TP
Paper holder
LENGTH X=inch
363TB-18
18.03
363TB-24
23.62
363DTB-18
18.03
363DTB-24
363TS-22
23.62
use B size
drill(0.238)
22.05
X
363TB-18 & 363TB-24
1
Measure and mark holes as listed in the above table.
Drill screw mounting holes using a B size drill bit(0.238).
-IMPORTANT: Ensure that the holes you have drilled for
installation are level.
363DTB-18 & 363DTB-24
RECOMMENDED
TOOLS AND MATERIALS
2
Affix your mounting hardware to the wall using your
mounting screws.- For walls with brick or other types
on masonry we suggest using nylon plugs. For cavity
walls we suggest using toggle anchors if you are unable
to screw into studs.
363TS-22
Drill
Feature Highlights
Flathead Screwdriver,
Phillips Screwdriver
▪ Metal construction
▪ Standard finish is polished chrome
363TR
363RH
363TP
Finish Options
Append appropriate-suffix to model number.
▪ STN Satin Nickel finish
Warranty
▪ Limited Lifetime - to the original end purchaser
in residential/consumer installations
▪ 5 years - for commercial installations
Tape Measure
Hex Wrench
3
n All specifications subject to change without
prior notice. (Unit = inch)
After securing your mounting hardware to the wall place
the mounting end of your accessory onto the mounting
hardware as is shown in the picture below.- Affix your
accessory to the mounting hardware using the allen
wrench that shipped with the product.
ACCESSORIES INSTRUCTION
DIMENSIONS
363DTB-24
363TB-18
363TR
363TB-24
363RH
363TS-22
IMPORTANT CLEANING INSTRUCTIONS
To ensure that your Symmons product will continue to look as beautiful as the day it was installed,
please follow these simple cleaning instructions.
1. To clean the finish on your Symmons product, rinse with clean water,wipe with a soft damp cloth
and blot dry with a soft cotton cloth or towel.
2. If heavy cleaning is required start by cleaning as described in Step 1. Use a mild liquid soap or liquid
glass cleaner to remove any remaining surface buildup. Rinse product with clean water to remove any
remaining cleaning solution and blot dry with a soft cotton cloth or towel.
Do not use cleaning products containing abrasives, acids, alcohol, bleach or foaming compounds. If any
unintentional splashing or overspray of these types of cleaning products comes in contact with your
Symmons product, immediately rinse it with clean water and blot dry with a clean soft cotton cloth or
towel.
363DTB-18
363TP
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
(800)796-6667, (781)848-2250 ■ Fax (800)961-9621 ■ (781)664-1300 ■ www.symmons.com
customerservice@symmons.com ■ ©2013 Symmons Industries, Inc. ■ 022813 ■ ZV-1097