SOLUTI NS
RESIDENTIAL & COMMERCIAL
Effective April 2015
POCKET GUIDE
WATER HEATING
I NT EGRATED
HOME COMFO
RT
Water
| Residential
and Commercial
Water Heaters
Rheem.com
Residential Products
■ Professional Model Numbers...........4
■ EcoNet™..............................................4
■ ENERGY STAR®..................................5
■ Tankless Gas
Prestige
• Prestige High Efficiency
Condensing Tankless.................... 54-55
Mid-Efficiency
• Mid-Efficiency Tankless................ 56-57
■ Electric Tank-Type
Professional Prestige
• Prestige Hybrid Heat Pump.......... 58-59
• Prestige......................................... 60-61
Professional Classic Plus
• Classic Plus.................................. 62-63
Professional Classic
• Classic.......................................... 64-65
• Classic Point-of-Use..................... 66-67
• Classic for Mfg. Housing.............. 68-69
Table Top........................................ 70-71
•M
arathon Thermal
Storage Tank................................. 86-87
■ Tankless Electric........................ 72-73
Marathon Products
■ Solar
• SolPak Active System with
Electric Backup............................ 74-75
•S
olPak Active System with
Gas Backup.................................. 76-77
• Solar Collectors............................ 78-79
• Solaraide HE Tanks....................... 80-81
• Solaraide HE with Gas Assist....... 82-83
• Solaraide Storage Tank................ 84-85
■ Miscellaneous
• ProtectionPlus....................................88
• EverKleen System..............................89
• Lifeguard Electric Element..................90
• Accessories........................................90
■ Thermal Expansion Tanks...............91
• Marathon...................................... 92-93
•M
arathon Point-of-Use................. 92-93
•M
arathon Heavy Duty................... 94-95
Table of Contents
■ Gas Tank-Type
Professional Prestige
• Prestige High Efficiency
Condensing Power Direct Vent......... 6-7
• Prestige Powered Damper................ 8-9
•P
restige Powered Damper
Ultra Low NOx.............................. 10-11
Professional Classic Plus
• Classic Plus Induced Draft........... 12-13
• Classic Plus Powered Damper..... 14-15
• Classic Plus Atmospheric............. 16-17
• Classic Plus Heavy Duty .............. 18-19
• Classic Plus Power Direct Vent..... 20-23
• Classic Plus Heavy Duty
Power Direct Vent......................... 24-25
• Classic Plus Heavy Duty
Power Vent .................................. 26-27
• Classic Plus Powered Damper
Ultra Low NOx.............................. 28-29
• Classic Plus Ultra Low NOx.......... 30-31
•C
lassic Plus Heavy Duty
Ultra Low NOx.............................. 32-33
Professional Classic
• Classic Atmospheric..................... 34-35
• Classic Power Vent....................... 36-37
• Classic Power Direct Vent............ 38-41
• Classic Direct Vent........................ 42-43
• Classic Ultra Low NOx.................. 44-45
• Classic Power Vent
Ultra Low NOx.............................. 46-47
• Classic Atmospheric for
Mfg. Housing................................ 48-49
• Classic Direct Vent for
Mfg. Housing................................ 50-51
• Classic Direct Vent Co-Axial
for Mfg. Housing........................... 52-53
2
Commercial Products
■ Gas Tank-Type
Ultra High Efficiency
• SPIDERfire..................................... 96-97
• Super Duty..................................... 98-99
• AdvantagePlus........................... 100-101
Heavy Duty
• Universal.................................... 102-103
• Universal Low NOx.................... 104-105
• Universal Ultra Low NOx........... 106-107
• Universal Induced Draft............. 108-109
• Xtreme....................................... 110-111
• VentMaster................................. 112-113
• Hot Water Supply Heaters......... 114-115
Medium Duty
• Medium Duty............................. 116-117
• Medium Duty Ultra Low NOx..... 118-119
• Power Vent................................ 120-121
• Power Direct Vent...................... 122-123
• Power Vent Kits......................... 124-125
■ Tankless Gas
• Tankless Temperature
Upgrade Kits.............................. 126-127
■ Electric Tank-Type
Large Volume.............................. 128-129
Heavy & Medium Duty
• Heavy Duty................................ 130-131
• PowerPack................................ 132-133
• Eclipse....................................... 134-135
• Booster...................................... 136-137
Light Duty.................................... 138-139
Point-of-Use................................ 140-141
■ Storage Tanks
• Storage Tanks............................ 142-143
• Large Volume Storage Tanks..... 144-145
■ CertiSpec Web............................... 146
EliteXpress
48 Hour
DELIVERY
Time is Money.
We respect your time and
our EliteXpress 48-hour
guarantee proves it.
Our most popular commercial water heaters will be ready and waiting
for the plumbing contractor at any Rheem commercial water heater
­distributors’ warehouse in 48-hours or less.
Models available for 48-hour delivery: Spiderfire, Universal, Universal Low
NOx, Universal Ultra Low NOx, Xtreme, Medium Duty, Medium Duty Ultra Low
NOx, Power Vent, Power Direct Vent, Heavy Duty Electric, PowerPack ASME,
Booster, Light Duty Electric, Point-of-Use, Storage Tanks (ST-80, ST-120, ST175)
■ Conversion Charts.................. 147-166
3
Professional Model Numbers
EcoNet™
Gas Models
PRO Models
(If “+”, then
Classic Plus
Platform)
PROG40S-38N RH62 XXX -1
Fuel Type
G-Gas
E-Electric
Rated
Capacity:
(Gallons)
Gas Type:
N-Natural
P-LP
U-ULNOx
Height:
S-Short
Input Rate:
(kbtu/hr)
Energy
Factor
(or Blank)
Brand:
RH-Rheem
Rev. Level (If present)
Miscellaneous:
DV-Direct Vent
DVX-DV Coax (Manufactured
Housing)
MH-Manufactured Housing
PV-Power Vent
PDV Power Direct Vent
EC1-Elec. Control Level 1
EC2-Elec. Control Level 2
H-High Altitude
ID-Induced Draft
PD-Powered Damper
Electric Models
PRO Models
(If “+”, then
Classic Plus
Platform)
PROE50 M2 RH95 XXX -1
Fuel Type
G-Gas
E-Electric
Rated
Capacity:
(Gallons)
Height:
S-Short
M-Medium
T-Tall
Elements:
1-1 Element
2-2 Elements
Energy
Factor
(or Blank)
Brand:
RH-Rheem
Rev. Level (If present)
Miscellaneous:
MH-Manufactured Housing
EC1-System Sentinel
POU-Point-of-Use
B-Blanket
Introducing EcoNet™,
the smart home system
for heating, cooling and
water heating developed
exclusively by Rheem.
The EcoNet™ WiFi Kits provide remote access to EcoNet™ Enabled
Electric and Gas Water Heaters from mobile apps and a mobile friendly
web portal.
Contractor Benefits:
EcoNet™ makes it easier than ever for homeowners to
save energy and achieve that perfect temperature –
all while giving you the diagnostics you need to deliver
that perfect level of service.
•E
quipment Detection – EcoNet™ automatically
detects all connected equipment
• Equipment Alerts – Help homeowners identify
what part of equipment requires attention before
making service call
• Contact Info – Contractor contact details stored
in the EcoNet™ app are automatically displayed
when equipment alerts occur
4
Energy Star® Qualified Water Heaters
What is Energy Star®?
Energy efficient choices can save families
about a third on their energy bill with ­similar
savings of greenhouse gas ­emissions,
without sacrificing f­eatures, style or
comfort. Energy Star® helps you
make the energy ­efficient choice.
Tankless
Models
Tank Models
Gas
Induced Draft
H PRO+G29-60N RH70 ID
Direct Vents
H RTGH-84DVLN
H RTGH-84DVLP
H RTGH-90DVLN
H RTGH-90DVLP
H RTGH-95DVLN
H RTGH-95DVLP
Outdoor
H RTGH-84XLN
H RTGH-84XLP
H RTGH-90XLN
H RTGH-90XLP
H RTGH-95XLN
H RTGH-95XLP
Commercial Models
Gas
Short Powered Damper
H PRO+G40S-40N RH67 PD
H PRO+G50S-40N RH67 PD
Tall Powered Damper
H PROP G38-40N RH69 PD
H PROP G50-40N RH67 PD
H PRO+G38-40N RH69 PD
H PRO+G50-40N RH67 PD
H PRO+G50-50N RH67 PD
Tall Hi-Input Powered Damper
H PRO+G50-50N RH67 PD
Powered Damper
Ultra Low NOx ­
H PROP G40-36U RH68
H PROP G50-36U RH68
H PRO+G40-36U RH68
H PRO+G50-36U RH68
Short Power Vent
H PROG40S-36N RH67 PV
H PROG50S-36N RH67 PV
Tall Power Vent
H PROG40-40N RH67 PV
H PROG50-42N RH67 PV
Power Vent Ultra Low NOx
H PROG40-36U RH67 PV
H PROG50-38U RH67 PV
Power Direct Vent
H RHE40S
H RHE50
H PROG40-40N RH67 PDV
H PROG50-40N RH67 PDV
Electric
Hybrid Heat Pump
H HB50RH
Spiderfire
H GHE80ES-130(A)
H GHE80ES-150(A)
H GHE80ES-200(A)
H GHE80ES-250(A)
H GHE80ES-300(A)
H GHE100ES-130(A)
H GHE100ES-160(A)
H GHE100ES-200(A)
H GHE100ES-250(A)
H GHE100ES-300(A)
H GHE100ES-350(A)
H GHE100ES-400(A)
AdvantagePlus
H HE55-100
H HE55-130
H HE80-130
H HE119-130
H HE55-160
H HE80-160
H HE119-160
H HE55-199
H HE80-199
H HE119-199
ENERGY STAR®
Energy Star® is a
joint program of the U.S.
­Environmental Protection ­
Agency and the U.S.
­Department of ­Energy
helping us all save money and protect
the environment through energy ­efficient
­products and practices.
5
Professional Prestige™ High Efficiency Condensing Power Direct Vent
Efficiency
• .82 EF
•E
nergy Star® rated
Performance
•F
HR: Up to 93 gallons for natural and LP gas
• Recovery: 43.6 to 48.5 GPH at a 90° F rise,
depending on model
• Integrated system control for easy installation
and service
•D
iagnostic system control can be replaced
without draining the water heater
Low Emissions
•E
co-friendly burner, low NOx design
Features
•P
ower direct vents are an ideal choice when
either indoor air quality or ­negative air pressure
are concerns
• Two-pipe system: one pipe pulls in outside
air for combustion and the other exhausts
­combustion gases
• 120 VAC, 60Hz, induced draft blower
• New whisper quiet blower
• Proven center flue design with s­ ubmerged coil
type condensing heat exchanger
• Heat exchanger is porcelain coated i­nside and
out for increased product life
Flammable Vapor Detection System
• FVIR compliant protective
• Control system that disables the heater in the
presence of flammable vapor a
­ ccumulation
Flexible Venting Options
• Long venting lengths up to 60 feet
• Use 2 or 3 inch diameter PVC, ABS, or CPVC
vent pipe options. (In Canada ULC S636 PVC
and CPVC must be used.)
• Vertical or horizontal termination
• Concentric vent kit available
Longer Life
• Dual anode rods protect the tank from corrosion
Plus…
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
• Durable silicon nitride igniter (HSI)
• Inlet tube with diffuser enhances heat transfer
• Front access to condensate trap and vent pipe
• Condensate neutralizer option
• Standard replacement parts
Warranty
•6
-Year limited tank and parts ­warranty*
*See Residential Warranty Certificate for ­complete
information
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
Gas Tank-Type
Self-Diagnostic System
Innovative Technology
High Altitude Compliant
• Models are certified for applications up to 9,000
feet above sea level
LEED Points = 2
6
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
T
GAS INPUT IN RECOVERY IN FIRST HOUR
Y
NATURAL GAS
THOUS. BTU/H G.P.H. 90° RISE DEL. G.P.H.
P GAL. MODEL
E CAP. NUMBER*
NAT.
LP
NAT.
LP
NAT.
LP
HT. TO
HT. TO
TOP OF TOP OF
TANK
VENT AIR INLET
HT.
DIAM.
AB
C
D
HT. TO
GAS CONN.
E
WATER
CONN.
CNTR.
F
HT. TO
SIDE T&P
VALVE
G
ENERGY INFO.
WATER
FRONT
ENERGY
CONN.
TO
SHIP.
FACTOR
sizeBACKWT.
H
I
(LBS)
NAT.
LP
Short 38 H RHE40S
40
36
48.5
43.6
74
74
60-3/8
60-1/8
51-1/16 22-1/8
14-1/8
8
44-1/4
3/4
26-11/16
220
0.82
0.82
Tall 48 H RHE50
40
36
48.5
43.6
93
93
68-3/4
68-5/8
59-11/16 22-1/8
14-1/8
8
52-7/8
3/4
26-11/16
250
0.82
0.82
*Refer to Specification Sheet on Rheem.com for LP model numbers. • Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.
H Energy Star® compliant model.
Air-Inlet and Venting Information for RHE40S and RHE50
Model
Number
Vent & Combustion
Air-Inlet
Pipe Diameter
(Inches)
T&P FITTING
3/4" NPT
Minimum Allowed
Maximum Allowed
Vent
Equivalent Vent & Combustion Equivalent Vent & Combustionand Combustion
Air-Inlet Lengths – Air-Inlet Lengths – Air-Inlet System
Each Pipe Run (Ft.)
Each Pipe Run (Ft.)
Termination(s)
From Sea Level Through 5,999 ft. Above Sea Level
RHE40S
2
7
RHE40S
3
7
RHE50
2
7
RHE50
3
7
From 6,000 ft. Above Sea Level Through 8,999 ft. Above Sea Level
RHE40S
2
Not Allowed
RHE40S
3
7
RHE50
2
Not Allowed
RHE50
3
7
30
60
30
60
90° ElbowsConcentric*
90° ElbowsConcentric*
90° ElbowsConcentric*
90° ElbowsConcentric*
Not Allowed
45
Not Allowed
45
–
–
90° ElbowsConcentric*
–
–
90° ElbowsConcentric*
One 90° elbow is equivalent to 5 feet of straight pipe. One 45° elbow is equivalent to 2.5 feet of straight pipe. The vent and combustion air
inlet terminations are not included in the equivalency calculations.
* Use only Rheem 3 inch concentric termination kit SP20245.
H
HOT WATER
CONNECTION
H
COLD WATER
CONNECTION
COMBUSTION
AIR INLET
COMBUSTION
EXHAUST (VENT)
D
A BC
I
G
F
1/2"
E
7
Professional Prestige™ Powered Damper
Efficiency
• .67
- .69 EF
•E
nergy Star® rated
Performance
•F
HR: 68 - 84 gallons
• Recovery: Up to 40.4 GPH at a 90° F rise,
depending on model
Technology
• 24 VAC flue damper, 110 VAC outlet r­equired
• Includes 19-foot cord, 3-prong plug
• Standard Cat. I, double-wall, B-vent, 3”
(4” adaptor included)
Guardian System™ & Sensor
• Exclusive air/fuel shut-off device
• Maintenance free – no filter to clean
• Disables the heater in the presence of
­flammable vapor accumulation
Low Emissions
Longer Life
• Electronic
gas control for improved monitoring
and service
•E
co-friendly burner, low NOx design
•M
eets 40 ng/J NOx r­equirements
• EcoNet™ enabled for
­integration with home
­automation, energy
­management and demand
response systems
• Premium grade anode rod provides long-lasting
tank protection
High Altitude Compliant
• Certified to 10,100 ft. above sea level (50-gallon
50K Btu/h model certified to 5,999 feet above
sea level)
• Dual certified for both potable water and space
heating
• Enhanced flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
• EverKleen™ patented system fights sediment
build-up
• Standard replacement parts
Warranty
•1
2-Year limited tank and parts ­warranty*
*See Residential Warranty Certificate for ­complete
information
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
LEED Point = 1
Gas Tank-Type
Self-Diagnostic System
Plus…
8
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
ENERGY INFO.
T
HT. TO
WATER
HT. TO
WATER
GAS INPUT IN
RECOVERY IN
FIRST HOUR
Y
HT. TO TANK
GAS VENT
CONN. SIDE T&P CONN.
SHIP.
ENERGY
THOUS. BTU/H
G.P.H. 90° RISE
DEL. G.P.H.
P GAL.MODEL
VENT HT. DIAM.CONN. SIZE CNTR. VALVE sizeWT.
FACTOR
E CAP. NUMBER
NAT.
LP
NAT.
LP
NAT.
AB
C
D
E
F
G
H
(LBS)
NAT.
Tall38H PROP G38-40N RH69 PD
40
36
40.4
36.4
68
Tall 50 H PROP G50-40N RH67 PD
40
36
40.4
36.4
84
*Refer to Specification Sheet on Rheem.com for LP model numbers.
Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.
H Energy Star® compliant model.
62-3/4 57-3/4 19-3/4
63
58
21-3/4
14
3 or 4
8
52-1/4
3/4
140
0.69
14
3 or 4
8
52-1/2
3/4
160
0.67
ANODE ROD
H
H
HOT
WATER
CONNECTION
F
E
COLD
WATER
CONNECTION
3/4" N.P.T.
RELIEF
VALVE
OPENING
C
A B
1/2"
G
D
9
Professional Prestige™ Powered Damper Ultra Low NOx
Efficiency
• .68 EF
•E
nergy Star® rated
Performance
Self-Diagnostic System
•E
lectronic gas control for improved monitoring
and service
Low Emissions
•U
ltra low NOx 36,000 Btu/h burner
•M
eets 10 ng/J NOx r­equirements
• SCAQMD Rule 1121 compliant
• 24 VAC flue damper, 110 VAC outlet ­
required
• Includes 19-foot cord, 3-prong plug
• Standard Cat. I, double-wall, B-vent, 3”
(4” adaptor included)
Longer Life
• Premium grade anode rod provides long-lasting
tank protection
Guardian System™ & Sensor
• Exclusive air/fuel shut-off device
• Maintenance free – no filter to clean
• Disables the heater in the presence of
flammable vapor accumulation
High Altitude Compliant
• Certified to 10,200 ft. above sea level
Plus…
• Dual certified for both potable water and space
heating
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
• EverKleen™ patented system fights sediment
build-up
• Standard replacement parts
Warranty
• 12-Year limited tank and parts w
­ arranty*
*See Residential Warranty Certificate for ­complete
information
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
Gas Tank-Type
•F
HR: 93 gallons for 50-gallon model and
71 gallons for 40-gallon
• Recovery: 36.4 GPH at a 90° F rise
Technology
• EcoNet™ enabled for
­integration with home
­automation, energy
­management and demand
response systems
10
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
HT. TO
SIDE T&P
VALVE
G
ENERGY INFO.
T
Y
GAS INPUT IN
RECOVERY IN FIRST HOUR
HT. TO
TANK
P GAL. MODEL
THOUS. BTU/H G.P.H. 90° RISE DEL. G.P.H.
VENT
HT.
DIAM.
E CAP.NUMBER
NAT.
NAT.
NAT.
AB
C
HT. TO
GAS
VENT
CONN. SIZE
D
E
WATER
CONN.
CNTR.
F
WATER
CONN.
SHIP.
sizeWT.
H
(LBS)
ENERGY
FACTOR
NAT.
Tall 40 H PROP G40-36U RH68
36
36.4
71
65
60
21
17-3/8 3 or 4
8
54
3/4
150
0.68
Tall 50 H PROP G50-36U RH68
36
36.4
93
64-3/4
59-3/4
23
17-3/8 3 or 4
8
53-3/4
3/4
180
0.68
Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.
H Energy Star® compliant model.
ANODE ROD
H
H
HOT
WATER
CONNECTION
F
E
COLD
WATER
CONNECTION
3/4" N.P.T.
RELIEF
VALVE
OPENING
C
A B
1/2"
G
D
11
Professional Classic Plus™ Induced Draft
Efficiency
• .70 EF
•E
nergy Star® rated
•W
ell insulated for reduced stand-by heat loss
Performance
Compact Size
•S
mall foot print, 17-3/4 inch ­diameter
•F
ast one-man installation, compact and
light weight
Self-Diagnostic System
• Integrated self-diagnostic system control for
easy installation and service
Low Emissions
•E
co-friendly burner, low NOx design
•M
eets 40 ng/J NOx requirements
• 110 VAC draft inducer (includes 8-foot cord
with 3-prong plug)
• Standard atmospheric Category I, double-wall,
B-vent, 3” or 4” (4” adaptor included)
• Fan assisted draft inducer creates the proper
draft to expel the combustion gases
Guardian System™ & Sensor
• Exclusive air/fuel shut-off device for ­double
protection
• Maintenance free – no filter to clean
• Disables the heater in the presence of
flammable vapor accumulation
Longer Life
• Premium grade anode rod provides long-lasting
tank protection
High Altitude Compliant
• Certified for applications up to 7,700 feet above
sea level
Plus…
• Dual certified for both potable water and
space heating
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
• EverKleen™ patented system fights sediment
build-up
• Standard replacement parts
Warranty
•8
-Year limited tank and parts ­warranty*
• With ProtectionPlus™ the 8-year limited
tank warranty becomes 12-year
*See Residential Warranty Certificate for ­complete
information
Gas Tank-Type
•2
9-Gallon capacity with 90 gallon FHR
performance
• Recovery: 61 GPH at 90° F rise, exceeds
standard 50-gallon by up to 49%
Technology
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
LEED Point = 1
12
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
GAS INPUT IN
RECOVERY IN FIRST HOUR
HT. TO
TANK
GAL. MODEL
THOUS. BTU/H
G.P.H. 90° RISE
DEL. G.P.H.
VENT
HT.
DIAM.
CAP. NUMBER
NAT.
NAT.
NAT.
AB
C
29
H PRO+G29-60N RH70 ID
60
61
90
65-1/2
58-1/4
17-3/4
HT. TO
GAS
VENT CONN.
SIZE
D
E
14
3 or 4
ENERGY INFO.
WATER
CONN.
CNTR.
F
HT. TO
SIDE
T&P
G
WATER
CONN.
H
SHIP.
WT.
(LBS)
ENERGY
FACTOR
NAT.
8
51-9/16
3/4
136
0.70
Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.
H Energy Star® compliant model.
Performance
PRO+G29-60N RH70 ID
90
60
88
50
86
40
84
Conventional
50-Gal. Gas
82
80
78
Gallons
Gallons
Recovery
70
0.70
Conventional
50-Gal. Gas
30
20
50 Gal.
0
0.60
29 Gal.
50 Gal.
ANODE ROD
H
H
HOT
WATER
CONNECTION
F
E
PRO+G29-60N RH70 ID
Conventional
50-Gal. Gas
0.40
0.30
0.10
COLD
WATER
CONNECTION
3/4" N.P.T.
RELIEF
VALVE
OPENING
0.50
C
0.20
10
29 Gal.
0.80
PRO+G29-60N RH70 ID
Energy Factor (EF)
First Hour Rating
92
Efficiency
Energy Efficiency
29 Gal.
50 Gal.
A B
1/2"
Energy Factor based on FTC
Energy Guide labels.
XR90
50 Gal.
Footprint
­ omparison
C
Narrow 17-3/4
inch diameter fits
in a smaller space
than standard
40 or 50-gallon
models.
G
D
13
Professional Classic Plus™ Powered Damper
Efficiency
• .67 - .69 EF
•E
nergy Star® rated
Performance
Self-Diagnostic System
•E
lectronic gas control for improved monitoring
and service
Low Emissions
•E
co-friendly burner, low NOx design
•M
eets 40 ng/J NOx r­equirements
• EcoNet™ enabled for
­integration with home
­automation, energy
­management and demand
response systems
• 24 VAC flue damper, 110 VAC outlet r­equired
• Includes 19-foot cord, 3-prong plug
• Standard Cat. I, double-wall, B-vent, 3”
(4” adaptor included)
Guardian System™ & Sensor
• Exclusive air/fuel shut-off device
• Maintenance free – no filter to clean
• Disables the heater in the presence of
flammable vapor accumulation
Longer Life
• Premium grade anode rod provides long-lasting
tank protection
Plus…
• Dual certified for both potable water and space
heating
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
• Standard replacement parts
Warranty
•8
-Year limited tank and parts ­warranty*
• With ProtectionPlus™ the 8-year limited tank
warranty becomes 12-year
*See Residential Warranty Certificate for ­complete
information
High Altitude Compliant
• Certified to 10,100 ft. above sea level (50-gallon
50K Btu/h model certified to 5,999 feet above
sea level)
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
LEED Point = 1
Gas Tank-Type
•F
HR: 68 - 89 gallons
• Recovery: Up to 50.5 GPH at a 90° F rise,
depending on model
Technology
14
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
ENERGY INFO.
T
HT. TO
WATER
HT. TO
WATER
GAS INPUT IN
RECOVERY IN
FIRST HOUR
Y
NATURAL GAS
HT. TO TANK
GAS VENT
CONN. SIDE T&P CONN.
SHIP.
ENERGY
THOUS. BTU/H
G.P.H. 90° RISE
DEL. G.P.H.
P GAL.MODEL
VENT HT. DIAM.CONN. SIZE CNTR. VALVE sizeWT.
FACTOR
E CAP. NUMBER*
NAT.
LP
NAT.
LP
NAT.
AB
C
D
E
F
G
H
(LBS)
NAT.
Tall 38 H PRO+G38-40N RH69 PD
40
36
40.4
36.4
68
14
3 or 4
8
52-1/4
3/4
140
0.69
Tall 50 H PRO+G50-40N RH67 PD
40
36
40.4
36.4
84
63
58
21-3/4
14
3 or 4
8
52-1/2
3/4
160
0.67
Tall 50 H PRO+G50-50N RH67 PD
50
–
50.5
–
87
63-1/2
58
21-3/4
14
4
8
52-1/2
3/4
160
0.67
Short 40 H PRO+G40S-40N RH67 PD
40
36
40.4
36.4
72
55-1/2 50-1/2 21-3/4
14
3 or 4
8
44
3/4
140
0.67
Short 50 H PRO+G50S-40N RH67 PD
40
36
40.4
36.4
89
55-1/2 50-1/2 23-3/4
14
3 or 4
8
44
3/4
160
0.67
*Refer to Specification Sheet on Rheem.com for LP model numbers.
Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.
H Energy Star® compliant model.
62-3/4 57-3/4 19-3/4
ANODE ROD
H
H
HOT
WATER
CONNECTION
F
E
COLD
WATER
CONNECTION
3/4" N.P.T.
RELIEF
VALVE
OPENING
C
A B
1/2"
G
D
15
Professional Classic Plus™ Atmospheric
Efficiency
• .59 - 62 EF
• More hot water at a low operating cost
Performance
Guardian System™ & Sensor
•E
xclusive air/fuel shut-off device
•M
aintenance free – no filter to clean
•D
isables the heater in the presence of
flammable vapor accumulation
Low Emissions
•E
co-friendly burner, low NOx design
•M
eets 40 ng/J NOx r­equirements
Longer Life
•P
remium grade anode rod provides long-lasting
tank protection
• Easy to light – no matches required
• EverKleen™ patented system fights sediment
build-up
• Enhanced flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
• Standard replacement parts
Warranty
LEED Point = 1
†
FLUE
ANODE ROD
H
H
HOT
WATER
CONNECTION
• 8-Year limited tank and parts w
­ arranty*
• With ProtectionPlus™ the 8-year limited tank
warranty becomes 12-year
F
E
*See Residential Warranty Certificate for ­complete
information
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
COLD
WATER
CONNECTION
3/4" N.P.T.
RELIEF
VALVE
OPENING
C
Gas Tank-Type
•F
HR: 68 to 103 gallons for natural gas
• Recovery: 36.4 to 61 GPH at a 90° F rise,
­depending on model
Plus…
A B
1/2"
G
D
16
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
ENERGY INFO.
T
HT. TO
WATER
HT. TO
WATER
GAS INPUT IN
RECOVERY IN
FIRST HOUR
Y
NATURAL GAS
HT. TO TANK
GAS VENT
CONN. SIDE T&P CONN.
SHIP.
ENERGY
THOUS. BTU/H
G.P.H. 90° RISE
DEL. G.P.H.
P GAL.MODEL
VENT HT. DIAM.CONN. SIZE CNTR. VALVE sizeWT.
FACTOR
E CAP. NUMBER*
NAT.
LP
NAT.
LP
NAT.
AB
C
D
E
F
G
H
(LBS)
NAT.
Tall 40 PRO+G40-40N RH62†
40
36
40.4
36.4
68
63-1/4
Tall 48 PRO+G48-60N RH60
60
54
61
55
93
61-3/4 58-1/2 21-3/4 14-3/8
Tall 50 PRO+G50-40N RH62†
40
36
40.4
36.4
83
62-1/2 59-1/4 21-1/2
Tall 55 PRO+G55-50N RH59
50
45
51
46
103
59-1/8 55-7/8 23-3/4 14-1/4
Short 40 PRO+G40S-40N RH62†
40
36
40.4
36.4
72
Short 50 PRO+G50S-40N RH61
40
36
40.4
36.4
89
54
60
50-1/2
19-1/2
23
14
14
14
54-1/4 51-1/8 23-3/4 14-1/4
3 or 4
8
53-1/2
3/4
135
0.62
4
11
51-7/8
3/4
150
0.60
3 or 4
8
52-1/2
3/4
165
0.62
3 or 4
8
48-3/4
3/4
175
0.59
3 or 4
8
44
3/4
135
0.62
3 or 4
8
44
3/4
186
0.61
*Refer to Specification Sheet on Rheem.com for LP model numbers.
Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.
LEED Point = 1
†
17
Professional Classic Plus™ Heavy Duty
Performance
• Recovery Capacity: 72.8 gallons per hour
(delivers approximately 113 g
­ allons of hot water
in the first hour for 75-gallon models and 115
gallons for 98-gallon models)**
Guardian System™ & Sensor
Easy to Light
•P
iezo Ignitor - no matches required
Low Emissions
•E
co-friendly burner, low NOx design
•M
eets 40 ng/J NOx r­equirements
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
• Side water connections for space heating
­applications
• Standard replacement parts
Warranty
• 8-Year limited tank and parts w
­ arranty*
• With ProtectionPlus™ the 8-year limited tank
warranty becomes 12-year
*See Residential Warranty Certificate for ­complete
information
Efficiency | All models tested a­ ccording to ANSI test
­procedures, and meet or exceed the thermal efficiency and
standby loss ­requirements of current ASHRAE standard
(EPact). Also exceeds energy efficiency codes of all states
including C
­ alifornia Energy Commission (CEC).
Safety and Construction | Design certified by CSA: For
­operation at 160 degrees; meets all safety and c­ onstruction
requirements of ANSI Z21.10.3; as an automatic s­ torage
or instantaneous water heater; as an automatic circulating
tank water heater; and for operation on combustible floors
and in alcove installations. All models are North Carolina
Code c­ ompliant. C
­ ertified for 150 PSI maximum working
pressure.
Gas Tank-Type
•E
xclusive air/fuel shut-off device
•M
aintenance free – no filter to clean
•D
isables the heater in the presence of
flammable vapor accumulation
Plus…
Longer Life
•P
remium grade anode rod provides long-lasting
tank protection
18
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
T
HT. TO
WATER
HT. TO
WATER
GAS INPUT IN
RECOVERY IN
Y
HT. TO
TANK
GAS VENT
CONN.
SIDE T&P
CONN.
SHIP.
THOUS. BTU/H
G.P.H. 100° RISE**
P GAL.MODEL
VENTHT. DIAM. CONN. SIZE CNTR. VALVE sizeWT.
E CAP. NUMBER
NAT.
LP
NAT.
LP
AB
C
D
E
F
G
H
(LBS)
Tall
75 PRO+G75-76N RH
75.1
75.1
72.8
72.8
64
60
26-1/4
14-3/4
4
11
53-1/4
1
320
Tall
98 PRO+G98-76N RH
75.1
75.1
72.8
72.8
67-7/8
64
28-1/4
14-7/8
4
11
57-3/16
1
350
**Recovery Capacity is based upon a 100° F water temperature rise and calculated per ANSI Z21.10.3 standards. First hour hot water delivery is based upon 77° water temperature rise.
*Refer to Specification Sheet on Rheem.com for LP model numbers.
• 160° F Max. temperature setting.
FLUE
ANODE ROD
H
H
HOT
WATER
CONNECTION
COLD
WATER
CONNECTION
F
E
3/4" N.P.T.
RELIEF
VALVE
OPENING
C
A B
G
SIDE TAPS
1/2"
D
19
Professional Classic Plus™ Power Direct Vent
Efficiency
• .62 EF
Performance
•F
HR: 111 gallons for natural and 92 gallons
LP gas
• Recovery: 47.5 to 65.7 GPH at a 90° F rise,
depending on model
•E
lectronic gas control for improved monitoring
and service
Low Emissions
•E
co-friendly burner, low NOx design
Features
• Two pipe system: one pipe pulls in outside
air for combustion and the other exhausts
combustion gases
•1
20 VAC powered blower
• New whisper quiet blower
Flammable Vapor Detection System
•P
rotective control system that disables the
heater in the presence of fl­ ammable vapor
accumulation
• Long venting lengths up to 100 feet
• 3” or 4” PVC, ABS, or CPVC vent pipe options
• Vertical or horizontal termination
• Concentric vent kit available
Longer Life
• Premium grade anode rod provides long-lasting
tank protection
*See Residential Warranty Certificate for ­complete
information
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
High Altitude Compliant
• Models are certified for applications up to 10,200
feet above sea level
Plus…
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
• Durable silicon nitride igniter (HSI)
• Side taps for space heating a
­ pplications
• EverKleen™ patented system fights sediment
build-up
• Standard replacement parts
LEED Point = 1
Gas Tank-Type
Self-Diagnostic System
Flexible Venting Options
Warranty
• 8-Year limited tank and parts w
­ arranty*
• With ProtectionPlus™ the 8-year limited tank
warranty becomes 12-year
20
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
T
GAS INPUT IN
RECOVERY IN FIRST HOUR
Y
NATURAL GAS
THOUS. BTU/H G.P.H. 90° RISE
DEL. G.P.H.
P GAL.MODEL
E
Tall
CAP. NUMBER*
50 PRO+G50-65N RH62 PDV
NAT.
LP
NAT.
LP
NAT.
LP
HT. TO
HT. TO
TOP OF
TOP OF
TANK
VENT
AIR INLET
HT.
DIAM.
AB
C
D
65
47
65.7
47.5
111
92
67-5/8
68-3/8
59-3/8 21-3/4
HT. TO
GAS CONN.
E
WATER
CONN.
CNTR.
F
14
8
ENERGY INFO.
HT. TO
WATER FRONT
SIDE T&P CONN.
TO
SHIP.
VALVE
sizeBACKWT.
G
H
I
(LBS)
52-3/4
*Refer to Specification Sheet on Rheem.com for LP model numbers.
Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.
3/4
31-1/2
210
ENERGY
FACTOR
NAT.
LP
0.62
0.62
COMBUSTION
AIR INLET
T&P FITTING
3/4" N.P.T.
Air-Inlet and Venting Information – See Next Page.
COMBUSTION
EXHAUST
(VENT)
I
H
HOT
WATER
CONNECTION
SIDE TAPS
D
BA C
1/2"
H
COLD
WATER
CONNECTION
F
G
E
21
Professional Classic Plus™ Power Direct Vent
Air-Inlet and Venting Information
From Sea Level Through 2,000 ft. Above Sea Level
Model
Vent & Combustion Air-InletMin. Allowed Equiv. Vent & CombustionMax. Allowed Equiv. Vent & Combustion
Vent and Combustion
System Diameter (Inches)
Air-Inlet Lengths – Each Pipe Run (Ft.)
Air-Inlet Lengths – Each Pipe Run (Ft.) Air-Inlet System Termination(s)
3
7
50
90° Elbows
–
3
7
40
–
Concentric*
PRO+G50-65N RH62 PDV
4
7
100
90° Elbows
–
From 2,001 ft. Above Sea Level Through 5,999 ft. Above Sea Level
Model
Vent & Combustion Air-InletMin. Allowed Equiv. Vent & CombustionMax. Allowed Equiv. Vent & Combustion
Vent and Combustion
System Diameter (Inches)
Air-Inlet Lengths – Each Pipe Run (Ft.)
Air-Inlet Lengths – Each Pipe Run (Ft.) Air-Inlet System Termination(s)
PRO+G50-65N RH62 PDV
3
7
50
90° Elbows
–
PRO+G50-65N RH62 PDV
3
7
40
–
Concentric*
PRO+G50-65N RH62 PDV
4
7
100
90° Elbows
–
Gas Tank-Type
PRO+G50-65N RH62 PDV
PRO+G50-65N RH62 PDV
One 90° elbow is approximately equivalent to 5 feet of pipe. One 45° elbow is approximately equivalent to 2.5 feet of pipe.
* Use only Rheem 3 inch concentric termination.
22
Air-Inlet and Venting Information
From 6,000 ft. Above Sea Level Through 7,700 ft. Above Sea Level
Model
Vent & Combustion Air-InletMin. Allowed Equiv. Vent & CombustionMax. Allowed Equiv. Vent & Combustion
Vent and Combustion
System Diameter (Inches)
Air-Inlet Lengths – Each Pipe Run (Ft.)
Air-Inlet Lengths – Each Pipe Run (Ft.) Air-Inlet System Termination(s)
PRO+G50-65N RH62 PDV
3
7
50
90° Elbows
–
PRO+G50-65N RH62 PDV
3
7
40
–
Concentric*
PRO+G50-65N RH62 PDV
4
7
100
90° Elbows
–
From 7,701 ft. Above Sea Level Through 10,200 ft. Above Sea Level
Model
Vent & Combustion Air-InletMin. Allowed Equiv. Vent & CombustionMax. Allowed Equiv. Vent & Combustion
Vent and Combustion
System Diameter (Inches)
Air-Inlet Lengths – Each Pipe Run (Ft.)
Air-Inlet Lengths – Each Pipe Run (Ft.) Air-Inlet System Termination(s)
PRO+G50-65N RH62 PDV
3
7
25
90° Elbows
–
PRO+G50-65N RH62 PDV
3
7
20
–
Concentric*
PRO+G50-65N RH62 PDV
4
7
100
90° Elbows
–
One 90° elbow is approximately equivalent to 5 feet of pipe. One 45° elbow is approximately equivalent to 2.5 feet of pipe.
* Use only Rheem 3 inch concentric termination.
23
Professional Classic Plus™ Heavy Duty Power Direct Vent
Performance
• Recovery Capacity: 72.8 gallons per hour
(delivers approximately 120 gallons of hot water
in the first hour)**
Self-Diagnostic System
•E
lectronic gas control for improved monitoring
and service
•E
co-friendly burner, low NOx design
Features
• Two pipe system: one pipe pulls in outside
air for combustion and the other exhausts
combustion gases
•1
20 VAC powered blower
• New whisper quiet blower
Flammable Vapor Detection System
•P
rotective control system that disables the
heater in the presence of fl­ ammable vapor
accumulation
Flexible Venting Options
•L
ong venting lengths up to 100 feet
• 3” or 4” PVC, ABS, or CPVC vent pipe options
• Vertical or horizontal termination
• Concentric vent kit available
• Premium grade anode rod provides long-lasting
tank protection
Plus…
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
• Durable silicon nitride igniter (HSI)
• Side taps for space heating a
­ pplications
• EverKleen™ patented system fights sediment
build-up
• Standard replacement parts
Efficiency | All models tested a­ ccording to ANSI test
­procedures, and meet or exceed the thermal efficiency and
standby loss ­requirements of current ASHRAE standard
(EPact). Also exceeds energy efficiency codes of all states
including C
­ alifornia Energy Commission (CEC).
Safety and Construction | Design certified by CSA: For
­operation at 160 degrees; meets all safety and c­ onstruction
requirements of ANSI Z21.10.3; as an automatic s­ torage
or instantaneous water heater; as an automatic circulating
tank water heater; and for operation on combustible floors
and in alcove installations. All models are North Carolina
Code c­ ompliant. C
­ ertified for 150 PSI maximum working
pressure.
Warranty
• 8-Year limited tank and parts w
­ arranty*
• With ProtectionPlus™ the 8-year limited tank
warranty becomes 12-year
COMBUSTION
AIR INLET
T&P FITTING
3/4" N.P.T.
*See Residential Warranty Certificate for ­complete
information
COMBUSTION
EXHAUST
(VENT)
I
Gas Tank-Type
Low Emissions
Longer Life
H
HOT
WATER
CONNECTION
SIDE TAPS
D
BA C
1/2"
H
COLD
WATER
CONNECTION
F
G
E
24
DESCRIPTION
FEATURES
T
GAS INPUT IN
RECOVERY IN
Y
THOUS. BTU/H G.P.H. 100° RISE**
P GAL.MODEL
E
Tall
CAP. NUMBER
75
NAT.
PRO+G75-76N RH PDV
LP
75.1 75.1
NAT.
LP
72.8
72.8
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
HT. TO
HT. TO
TOP OF
TOP OF
TANK
VENT
AIR INLET
HT.
DIAM.
AB
C
D
70-3/8
71-1/4
60-1/2
26-1/4
HT. TO
GAS CONN.
E
WATER
CONN.
CNTR.
F
15
11
HT. TO
SIDE T&P
VALVE
G
53
WATER
FRONT
CONN.
TO
SHIP.
sizeBACK WT.
H
I
(LBS)
1
36-3/4
325
*Refer to Specification Sheet on Rheem.com for LP model numbers.
Vent and Combusion Air-Inlet System Information
From Sea Level Through 2,000 ft. Above Sea Level
Model
PRO+G75-76N RH PDV
PRO+G75-76N RH PDV
PRO+G75-76N RH PDV
Vent & Combustion Air-InletMin. Allowed Equiv. Vent & CombustionMax. Allowed Equiv. Vent & Combustion
Vent and Combustion
System Diameter (Inches)
Air-Inlet Lengths – Each Pipe Run (Ft.)
Air-Inlet Lengths – Each Pipe Run (Ft.) Air-Inlet System Termination(s)
3
3
4
8
8
8
50
40
100
90° Elbows
–
–
Concentric*
90° Elbows­–
From 2,001 ft. Above Sea Level Through 5,999 ft. Above Sea Level
Model
PRO+G75-76N RH PDV
PRO+G75-76N RH PDV
PRO+G75-76N RH PDV
Vent & Combustion Air-InletMin. Allowed Equiv. Vent & CombustionMax. Allowed Equiv. Vent & Combustion
Vent and Combustion
System Diameter (Inches)
Air-Inlet Lengths – Each Pipe Run (Ft.)
Air-Inlet Lengths – Each Pipe Run (Ft.) Air-Inlet System Termination(s)
3
3
4
8
8
8
25
20
100
90° Elbows
–
–
Concentric*
90° Elbows­–
From 6,000 ft. Above Sea Level Through 7,700 ft. Above Sea Level
Model
PRO+G75-76N RH PDV
Vent & Combustion Air-InletMin. Allowed Equiv. Vent & CombustionMax. Allowed Equiv. Vent & Combustion
Vent and Combustion
System Diameter (Inches)
Air-Inlet Lengths – Each Pipe Run (Ft.)
Air-Inlet Lengths – Each Pipe Run (Ft.) Air-Inlet System Termination(s)
4
8
One 90° elbow is approximately equivalent to 5 feet of pipe. One 45° elbow is approximately equivalent to 2.5 feet of pipe.
50
90° Elbows
* Use only Rheem 3 inch concentric termination.
–
25
Professional Classic Plus™ Heavy Duty Power Vent
Performance
Flexible Venting Options
Self-Diagnostic System
Longer Life
• Recovery Capacity: 72.8 gallons per hour
(delivers approximately 120 gallons of hot water
in the first hour)**
Low Emissions
•E
co-friendly burner, low NOx design
Features
•U
ses indoor air for combustion; blower
­exhausts the flue gases
•S
tandard 110 VAC electrical connection
• New whisper quiet blower
•O
ffers larger capacities than the standard
Power Vent
Guardian System™ & Sensor
•E
xclusive air/fuel shut-off device
•M
aintenance free – no filter to clean
•D
isables the heater in the presence of
flammable vapor accumulation
• Premium grade anode rod provides long-lasting
tank protection
Plus…
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
• Durable silicon nitride ignitor (HSI)
• EverKleen™ patented system fights sediment
build-up
• Standard replacement parts
Efficiency | All models tested a­ ccording to ANSI test
­procedures, and meet or exceed the thermal efficiency and
standby loss ­requirements of current ASHRAE standard
(EPact). Also exceeds energy efficiency codes of all states
including C
­ alifornia Energy Commission (CEC).
Safety and Construction | Design certified by CSA: For
­operation at 160 degrees; meets all safety and c­ onstruction
requirements of ANSI Z21.10.3; as an automatic s­ torage
or instantaneous water heater; as an automatic circulating
tank water heater; and for operation on combustible floors
and in alcove installations. All models are North Carolina
Code c­ ompliant. C
­ ertified for 150 PSI maximum working
pressure.
Gas Tank-Type
•E
lectronic gas control for improved monitoring
and service
• Long venting lengths up to 100 equivalent feet
• PVC, ABS, or CPVC vent pipe options
• Vertical or horizontal termination
Warranty
• 8-Year limited tank and parts w
­ arranty*
• With ProtectionPlus™ the 8-year limited tank
warranty becomes 12-year
*See Residential Warranty Certificate for ­complete
information
26
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
T
GAS INPUT IN
RECOVERY IN
Y
THOUS. BTU/H
G.P.H. 100° RISE**
P GAL.MODEL
E
Tall
CAP. NUMBER
75 PRO+G75-76N RH PV
NAT.
LP
NAT.
HT. TO
HT. TO
WATER
HT. TO
WATER
TOP OF
TANK
GAS
CONN.
SIDE T&P
CONN.
SHIP.
ASSEMBLYHT. DIAM. CONN. CNTR. VALVE sizeWT.
LP
AB
C
D
E
F
G
(LBS)
75.1
–
72.8
–
71-7/8
60-1/8
26-1/4
14-1/2
11
53-1/4
1
330
*Refer to Specification Sheet on Rheem.com for LP model numbers.
**Recovery Capacity is based upon a 100° F water temperature rise and calculated per ANSI Z21.10.3 standards. First hour hot water delivery is based upon 77° water temperature rise.
• 160° F Max. temperature setting.
• Features side water connections for space heating applications.
POWER VENT
ASSEMBLY
ANODE ROD
G
G
HOT
WATER
CONNECTION
Maximum and Minimum Vent Lengths for 3” and 4" Vents
E
From Sea level through 2,000 ft. above Sea level
Model
Vent System
Diameter
75-Gallon
Min. Allowed Equivalent Vent
Lengths (Each Pipe Run)
Max. Allowed Equivalent Vent
Lengths (Each Pipe Run)
Vent System
Termination(s)
3 Inches
10 Feet
50 Feet
90° Elbow
4 Inches
10 Feet
100 Feet
90° Elbow
For the 3" and 4" vent, one 90° elbow is approximately equal to 5 feet of pipe. One 45° elbow is approximately equal to 2.5 feet of pipe.
NOTICE: The mixing of 3" and 4" vent pipe is not recommended. If 4" pipe is used, a 3" to 4" reducer fitting is recommended at the
rubber coupling.
This water heater is supplied with a 3" Schedule 40 PVC 90° vent ­terminal. When venting with 4" pipe, a Schedule 40 PVC 90° vent ­terminal
must be used. Screens for both 3" and 4" vent terminals have been included.
COLD
WATER
CONNECTION
T&P FITTING
3/4" N.P.T.
C
A B
F
1/2"
SIDE TAPS
(75 GAL.
MODEL
ONLY)
D
27
Professional Classic Plus™ Powered Damper Ultra Low NOx
Efficiency
• .68 EF
•E
nergy Star® rated
Performance
Self-Diagnostic System
•E
lectronic gas control for improved monitoring
and service
Low Emissions
•U
ltra low NOx 36,000 Btu/h burner
•M
eets 10 ng/J NOx r­equirements
• SCAQMD Rule 1121 compliant
• 24 VAC flue damper, 110 VAC outlet ­
required
• Includes 19-foot cord, 3-prong plug
• Standard Cat. I, double-wall, B-vent, 3”
(4” adaptor included)
Guardian System™ & Sensor
• Exclusive air/fuel shut-off device
• Maintenance free – no filter to clean
• Disables the heater in the presence of
flammable vapor accumulation
Longer Life
• Premium grade anode rod provides long-lasting
tank protection
High Altitude Compliant
• Certified to 10,200 ft. above sea level
• EcoNet™ enabled for
­integration with home
­automation, energy
­management and demand
response systems
Plus…
• Dual certified for both potable water and space
heating
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
• EverKleen™ patented system fights sediment
build-up
• Standard replacement parts
Warranty
•8
-Year limited tank and parts ­warranty*
•W
ith ProtectionPlus™ the 8-year limited tank
warranty becomes 12-year
*See Residential Warranty Certificate for ­complete
information
Gas Tank-Type
•F
HR: 93 gallons for 50-gallon model and
71 gallons for 40-gallon
• Recovery: 36.4 GPH at a 90° F rise
Technology
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
28
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
HT. TO
SIDE T&P
VALVE
G
ENERGY INFO.
T
Y
GAS INPUT IN
RECOVERY IN FIRST HOUR
HT. TO
TANK
P GAL. MODEL
THOUS. BTU/H G.P.H. 90° RISE DEL. G.P.H.
VENT
HT.
DIAM.
E CAP.NUMBER
NAT.
NAT.
NAT.
AB
C
HT. TO
GAS
VENT
CONN. SIZE
D
E
WATER
CONN.
CNTR.
F
WATER
CONN.
SHIP.
sizeWT.
H
(LBS)
ENERGY
FACTOR
NAT.
Tall 40 H PRO+G40-36U RH68
36
36.4
71
65
60
21
17-3/8 3 or 4
8
54
3/4
150
0.68
Tall 50 H PRO+G50-36U RH68
36
36.4
93
64-3/4
59-3/4
23
17-3/8 3 or 4
8
53-3/4
3/4
180
0.68
Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.
H Energy Star® compliant model.
ANODE ROD
H
H
HOT
WATER
CONNECTION
F
E
COLD
WATER
CONNECTION
3/4" N.P.T.
RELIEF
VALVE
OPENING
C
A B
1/2"
G
D
29
Professional Classic Plus™ Ultra Low NOx
Efficiency
• .59 - .62 EF
•M
ore hot water at a low operating cost
Performance
•F
HR: 53 - 104 gallons for natural gas
• Recovery: Up to 45.5 GPH at a 90° F rise,
depending on model
•E
xclusive air/fuel shut-off device for ­double
protection
• Maintenance free – no filter to clean
• Disables the heater in the presence of
flammable vapor accumulation
Low Emissions
•U
ltra Low NOx radiant burner design
•S
tainless steel burner
• SCAQMD Rule 1121 compliant
• Meets 10 ng/J NOx requirements
High Altitude Compliant
• All models certified to 5,999 ft. above sea level
•5
0 and 55-Gallon models certified to 10,200 ft.
above sea level
• EverKleen™ patented system fights sediment
build-up
• Premium grade anode rod provides long-lasting
tank protection
• Easy to light – no matches required
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
• Exclusive Rheemglas® lining
Gas Tank-Type
Guardian System™ & Sensor
Plus…
Warranty
• 8-Year limited tank and parts w
­ arranty*
• With ProtectionPlus™ the 8-year limited tank
warranty becomes 12-year
*See Residential Warranty Certificate for ­complete
information
Units meet or exceed ANSI requirements and have
been tested according to D.O.E. procedures. Units
meet or exceed the energy efficiency requirements
of NAECA, ASHRAE standard 90, ICC Code and all
state energy efficiency performance criteria.
LEED Point = 1
30
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
T
Y
GAS INPUT IN
RECOVERY IN
FIRST HOUR
HT. TO
TANK
P GAL. MODEL
THOUS. BTU/H G.P.H. 90° RISE
DEL. G.P.H.
VENT
HT.
DIAM.
E CAP.NUMBER
NAT.
NAT.
NAT.
AB
C
HT. TO
GAS
VENT
CONN.
SIZE
D
E
WATER
CONN.
CNTR.
F
HT. TO
SIDE T&P
VALVE
G
ENERGY INFO.
WATER
CONN.
SHIP.
ENERGY
sizeWT.
FACTOR
H
(LBS)
NAT.
Tall 28
PRO+G28-30U RH63
30
30.3
53
58-7/8
56-1/8
16-1/2
17-1/2
3 or 4
8
50-1/8
3/4
108
0.63
Tall 38
PRO+G38-38U RH62
38
38.4
72
60-1/2
57-3/4
19
17-1/2
3 or 4
8
51-3/4
3/4
140
0.62
Tall 50
PRO+G50-36U RH62
36
36.4
91
62-5/8
59-7/8
23
17-3/8
3 or 4
8
53-5/8
3/4
170
0.62
Tall 55
PRO+G55-45U RH59
45
45.5
104 60-3/4
57-1/2
23-3/4
17-1/2
4
8
50-3/4
3/4
182
0.59
Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.
FLUE
ANODE ROD
H
H
HOT
WATER
CONNECTION
F
E
COLD
WATER
CONNECTION
3/4" N.P.T.
RELIEF
VALVE
OPENING
C
A B
1/2"
G
D
31
Professional Classic Plus™ Heavy Duty Ultra Low NOx
Performance
• Recovery Capacity: 72.8 gallons per hour
(delivers approximately 113 g
­ allons of hot water
in the first hour for 75-gallon models and 115
gallons for 98-gallon models)**
Flammable Vapor Detection System
High Altitude Compliant
• All models are certified for a
­ pplications up to
8,500 feet above sea level
• Integrated self diagnostic system control for
easy installation and service
• Eco-friendly burner, ultra low NOx design meets
14 ng/J NOx ­requirements
• Premium grade anode rod provides long-lasting
tank protection
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
• Side water connections for space heating
applications
• Standard replacement parts
• Standard 110-volt electrical c
­ onnection
• Durable silcon nitride igniter – Hot Surface
Ignition (HSI)
Efficiency | All models tested a­ ccording to ANSI test
­procedures, and meet or exceed the thermal efficiency and
standby loss ­requirements of current ASHRAE standard
(EPact). Also exceeds energy efficiency codes of all states
including C
­ alifornia Energy Commission (CEC).
Safety and Construction | Design certified by CSA: For
­operation at 160 degrees; meets all safety and c­ onstruction
requirements of ANSI Z21.10.3; as an automatic s­ torage
or instantaneous water heater; as an automatic circulating
tank water heater; and for operation on combustible floors
and in alcove installations. All models are North Carolina
Code c­ ompliant. C
­ ertified for 150 PSI maximum working
pressure.
Gas Tank-Type
•D
isables the heater in the presence of
­flammable vapors
•M
aintenance free – no filter to clean
Plus…
Warranty
• 8-Year limited tank and parts w
­ arranty*
• With ProtectionPlus™ the 8-year limited tank
warranty becomes 12-year
*See Residential Warranty Certificate for ­complete
information
32
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
T
Y
GAS INPUT IN
RECOVERY IN
HT. TO
TANK
P GAL. MODEL
THOUS. BTU/H G.P.H. 100° RISE**
VENT
HT.
DIAM.
E CAP.NUMBER
NAT.
NAT.
AB
C
HT. TO
GAS
VENT
CONN.
SIZE
D
E
WATER
CONN.
CNTR.
F
HT. TO
SIDE T&P
VALVE
G
WATER
FRONT
CONN.
TO
SHIP.
sizeBACK WT.
H
I
(LBS)
Tall 75 PRO+G75-75U RH
75.1
72.8
64-1/8
60-1/4
26-1/4
14-1/4
4
11
52-1/4
1
33-3/4
300
Tall 98 PRO+G98-75U RH
75.1
72.8
67-7/8
64
27-1/8
14-1/4
4
11
56-1/8
1
34-3/4
370
**Recovery Capacity is based upon a 100° F water temperature rise and calculated per ANSI Z21.10.3 standards. First hour hot water delivery is based upon 77° water temperature rise.
F
E
H
C
A B
G
SIDE
TAPS
3/4" N.P.T
HOT
WATER
CONNECTION
H
COLD
WATER
CONNECTION
I
D
33
Professional Classic™ Atmospheric
Efficiency
• .60 - .63 EF
• More hot water at a low operating cost
Performance
Guardian System™ & Sensor
•E
xclusive air/fuel shut-off device
•M
aintenance free – no filter to clean
•D
isables the heater in the presence of
flammable vapor accumulation
Low Emissions
•E
co-friendly burner, low NOx design
•M
eets 40 ng/J NOx r­equirements
Longer Life
•P
remium grade anode rod provides long-lasting
tank protection
Altitude Certification
• All models certified up to 5,999 ft. above sea
level, some certified up to 10,200
• Easy to light – no matches required
• EverKleen™ patented system fights sediment
build-up
• Enhanced-flow brass drain valve
• Low lead compliant
• Temperature and pressure relief valve included
• Standard replacement parts
Warranty
• 6-Year limited tank and parts w
­ arranty*
• With ProtectionPlus™ the 6-year limited tank
warranty becomes 10-year
FLUE
ANODE ROD
H
H
HOT
WATER
CONNECTION
F
E
*See Residential Warranty Certificate for ­complete
information
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
COLD
WATER
CONNECTION
3/4" N.P.T.
RELIEF
VALVE
OPENING
Gas Tank-Type
•F
HR: 55 to 93 gallons
• Recovery: 30.3 to 40.4 GPH at a 90° F rise,
depending on model
Plus…
C
A B
1/2"
G
D
34
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
ENERGY INFO.
T
HT. TO
WATER
HT. TO
WATER
GAS INPUT IN
RECOVERY IN
FIRST HOUR
Y
NATURAL GAS
HT. TO TANK
GAS VENT
CONN. SIDE T&P CONN.
SHIP.
ENERGY
THOUS. BTU/H
G.P.H. 90° RISE
DEL. G.P.H.
P GAL.MODEL
VENT HT. DIAM.CONN. SIZE CNTR. VALVE sizeWT.
FACTOR
E CAP. NUMBER*
NAT.
LP
NAT.
LP
NAT.
AB
C
D
E
F
G
H
(LBS)
NAT.
Tall
29 PROG29-32N RH63
32
30
32.3
30.3
55
59-3/4 56-7/8 16-1/2 14-1/4
3 or 4
8
50-3/4
3/4
110
0.63
Tall
40 PROG40-36N RH62†
36
–
36.4
–
67
61-1/2 58-1/2
19
14-1/4
3 or 4
8
52-1/4
3/4
127
0.62
Tall
40 PROG40-38N RH62†
38
–
38.4
–
73
61-1/2 58-1/2
19
14-1/4
3 or 4
8
52-1/4
3/4
127
0.62
Tall
40 PROG40-40N RH62†
40
36
40.4
36.3
68
63-1/4
19-1/2
14
3 or 4
8
53-1/2
3/4
135
0.62
Tall
40 PROG40-32P RH62†
–
32
–
32.3
–
61-1/2 58-1/2 18-1/2 14-1/4
3 or 4
8
52-1/4
3/4
125
0.62
Tall
50 PROG50-40N RH62†
40
36
40.4
36.4
83
62-1/2 59-1/4 21-1/2 14-1/2
3 or 4
8
52-1/2
3/4
165
0.62
Tall
50 PROG50-38N RH60†
38
36
38.4
36.4
93
61-1/4 58-3/8 20-1/2 14-1/4
3 or 4
8
51-3/8
3/4
150
0.60
Short 30 PROG30S-30N RH63
30
–
30.3
–
54
49-7/8
3 or 4
8
40-3/8
3/4
112
0.63
Short 40 PROG40S-40N RH62†
40
36
40.4
36.4
72
53-7/8 50-1/2
23
14-1/2
3
8
44
3/4
135
0.62
Short 40 PROG40S-34N RH62†
34
31
34.3
31.3
75
52-1/8 49-1/4
21
14-1/4
3 or 4
8
42-3/4
3/4
120
0.62
Short 40 PROG40S-38N RH62†
38
35
38.4
35.4
74
53-1/4 50-1/4 21-3/8 14-1/4
3 or 4
8
44
3/4
125
0.62
Short 50 PROG50S-40N RH61†
40
36
40.4
36.4
89
54-1/4 51-1/8 23-3/4 14-1/4
3 or 4
8
44
3/4
186
0.61
60
47
19-3/4 14-1/4
*Refer to Specification Sheet on Rheem.com for LP model numbers.
Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.
†LEED Point = 1
35
Professional Classic™ Power Vent
Efficiency
• .67 EF
•E
nergy Star® rated
Performance
Self-Diagnostic System
•E
lectronic gas control for improved monitoring
and service
Low Emissions
•E
co-friendly burner, low NOx design
Features
•U
ses indoor air for combustion; blower
­exhausts the flue gases
•S
tandard 120 VAC electrical connection
• New whisper quiet blower
Warranty
Flexible Venting Options
*See Residential Warranty Certificate for ­complete
information
• Exclusive air/fuel shut-off device
• Maintenance free – no filter to clean
• Disables the heater in the presence of
flammable vapor accumulation
• Long venting lengths up to 100 equivalent feet
• 2” or 3” PVC, ABS, or CPVC vent pipe options
• Vertical or horizontal termination
Longer Life
• Premium grade anode rod provides long-lasting
tank protection
•6
-Year limited tank and parts ­warranty*
•W
ith ProtectionPlus™ the 6-year limited tank
warranty becomes 10-year
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
High Altitude Compliant
• Tall models certified for applications up to 7,700
ft. above sea level and short models up to
5,999 feet above sea level
Gas Tank-Type
•F
HR: Up to 87 gallons for 50-gallon models and
up to 73 gallons for 40-gallon models
• Recovery: 32.4 to 42.4 GPH at a 90° F rise,
depending on model
Guardian System™ & Sensor
Plus…
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
• Durable Silicon Nitride Ignitor (HSI)
• EverKleen™ patented system fights sediment
build-up
• Standard replacement parts
LEED Point = 1
36
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
ENERGY INFO.
T
HT. TO
HT. TO
WATER
HT. TO
WATER
GAS INPUT IN
RECOVERY IN
FIRST HOUR
Y
NATURAL GAS
TOP OF
TANK
GAS
CONN. SIDE T&P CONN.
SHIP.
ENERGY
THOUS. BTU/H
G.P.H. 90° RISE
DEL. G.P.H.
P GAL.MODEL
ASSEMBLYHT. DIAM. CONN.CNTR. VALVE sizeWT.
FACTOR
E CAP. NUMBER*
NAT.
LP
NAT.
LP
NAT.
AB
C
D
E
F
G
(LBS)
NAT.
Tall 40 H PROG40-40N RH67 PV
40
36
40.4
36.4
68
67-3/8
59
19-3/4
14
8
53-1/2
3/4
140
0.67
Tall 50 H PROG50-42N RH67 PV
42
42
42.4
42.4
87
66-3/8
58
21-3/4
14
8
52-1/2
3/4
170
0.67
Short 40 H PROG40S-36N RH67 PV
36
32
36.4
32.4
73
62-1/2
51-1/4
21-3/4
14
8
44-1/4
3/4
155
0.67
Short 50 H PROG50S-36N RH67 PV
36
32
36.4
32.4
87
62-1/2
51-1/4
23-3/4
14
8
44
3/4
175
0.67
*Refer to Specification Sheet on Rheem.com for LP model numbers.
Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.
H Energy Star® compliant model.
POWER VENT
ASSEMBLY
Maximum and Minimum Vent Lengths for 3” Vents
NumbER OF
MINIMUM MAXIMUM
MAXIMUM
90° ELBOWS
NUMBER
PIPE PIPE PIPE
with Vent OF 45° lengthlength (ft.)length (ft.)
Terminal
Elbows
req. (ft.)
0’ - 2000’
2000’ - 7700’ *
NumbER OF
MINIMUM MAXIMUM
MAXIMUM
90° ELBOWS
NUMBER
PIPE PIPE PIPE
with Vent OF 45° lengthlength (ft.)length (ft.)
Terminal
Elbows
req. (ft.)
0’ - 2000’
2000’ - 7700’ *
One (1)
None
4.0
44.0
24.0
One (1)
None
5.0
95.0
75.0
One (1)
One (1)
4.0
41.0
21.0
One (1)
One (1)
5.0
92.5
72.5
Two (2)
None
4.0
38.0
18.0
Two (2)
None
5.0
90.0
70.0
Two (2)
One (1)
4.0
35.0
15.0
Two (2)
One (1)
5.0
87.5
67.5
Three (3)
None
4.0
32.0
12.0
Three (3)
None
5.0
85.0
65.0
For the 2” vent, one 90° elbow is approximately equal to 6 feet of pipe.
One 45° elbow is approximately equal to 3 feet of pipe.
*2,000’ – 6,000’ for short models.
ANODE ROD
G
Maximum and Minimum Vent Lengths for 2” Vents
For the 3” vent, one 90° elbow is approximately equal to 5 feet of pipe.
One 45° elbow is approximately equal to 2.5 feet of pipe.
*2,000’ – 6,000’ for short models.
G
HOT
WATER
CONNECTION
E
COLD
WATER
CONNECTION
T&P FITTING
3/4" N.P.T.
C
A B
F
1/2"
D
37
Professional Classic™ Power Direct Vent
Efficiency
• .67 EF
•E
nergy Star® rated
Performance
Self-Diagnostic System
•E
lectronic gas control for improved monitoring
and service
Low Emissions
•E
co-friendly burner, low NOx design
Features
• Two pipe system: one pipe pulls in outside
air for combustion and the other exhausts
­combustion gases
•1
20 VAC powered blower
• New whisper quiet blower
Flammable Vapor Detection System
• Disables the heater in the presence of
­flammable vapors
• Long venting lengths up to 100 feet
• PVC, ABS, or CPVC vent pipe options
• Vertical or horizontal termination
• Concentric vent kit available
Longer Life
• Premium grade anode rod provides long-lasting
tank protection
*See Residential Warranty Certificate for ­complete
information
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
High Altitude Compliant
• Models are certified for applications up to 10,200
feet above sea level
LEED Point = 1
Plus…
COMBUSTION
AIR INLET
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
• Durable silicon nitride igniter (HSI)
• EverKleen™ patented system fights sediment
build-up
• Standard replacement parts
Warranty
• 6-Year limited tank and parts w
­ arranty*
• With ProtectionPlus™ the 6-year limited tank
warranty becomes 10-year
T&P FITTING
3/4" N.P.T.
COMBUSTION
EXHAUST
(VENT)
I
H
Gas Tank-Type
•F
HR: Up to 93 gallons for natural and LP gas
• Recovery: 38.4 to 40.4 GPH at a 90° F rise,
depending on model
Flexible Venting Options
HOT
WATER
CONNECTION
H
COLD
WATER
CONNECTION
D
BA C
1/2"
F
G
E
38
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
T
GAS INPUT IN
RECOVERY IN FIRST HOUR
Y
NATURAL GAS
THOUS. BTU/H G.P.H. 90° RISE
DEL. G.P.H.
P GAL.MODEL
NAT.
LP
NAT.
LP
NAT.
LP
NAT.
LP
Tall 40 H PROG40-40N RH67 PDV
40
38
40.4
38.4
73
73
68-1/2
69-1/4
60-1/4 19-3/4
14
8
53-3/4
3/4
29-1/2
180
0.67
0.67
Tall 50 H PROG50-40N RH67 PDV
40
40
40.4
40.4
93
93
67-5/8
67-7/8
59-3/8 21-3/4
14
8
52-3/4
3/4
31-1/2
205
0.67
0.67
E
CAP. NUMBER*
HT. TO
GAS CONN.
E
WATER
CONN.
CNTR.
F
ENERGY INFO.
HT. TO
HT. TO
TOP OF
TOP OF
TANK
VENT
AIR INLET
HT.
DIAM.
AB
C
D
HT. TO
WATER FRONT
SIDE T&P CONN.
TO
SHIP.
VALVE
sizeBACKWT.
G
H
I
(LBS)
ENERGY
FACTOR
*Refer to Specification Sheet on Rheem.com for LP model numbers.
Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.
H Energy Star® compliant model.
Air-Inlet and Venting Information – See Next Page.
39
Professional Classic™ Power Direct Vent
Air-Inlet and Venting Information
From Sea Level Through 5,999 ft. Above Sea Level
Model
2
3
3
2
3
3
7
7
7
7
7
7
30
60
50
30
60
50
90° Elbows
90° Elbows
–
90° Elbows
90° Elbows
–
Concentric*
–
Concentric*
Concentric*
–
Concentric*
From 6,000 ft. Above Sea Level Through 7,700 ft. Above Sea Level
Model
PROG40-40N RH67 PDV
PROG40-40N RH67 PDV
PROG40-40N RH67 PDV
PROG40-40N RH67 PDV
PROG50-40N RH67 PDV
PROG50-40N RH67 PDV
PROG50-40N RH67 PDV
Vent & Combustion Air-InletMin. Allowed Equiv. Vent & CombustionMax. Allowed Equiv. Vent & Combustion
Vent and Combustion
System Diameter (Inches)
Air-Inlet Lengths – Each Pipe Run (Ft.)
Air-Inlet Lengths – Each Pipe Run (Ft.) Air-Inlet System Termination(s)
2
2
3
3
2
3
3
7
7
7
7
7
7
7
15
30
60
50
15
60
50
90° Elbows
–
90° Elbows
–
–
90° Elbows
–
–
Concentric*
–
Concentric*
Concentric*
–
Concentric*
Gas Tank-Type
PROG40-40N RH67 PDV
PROG40-40N RH67 PDV
PROG40-40N RH67 PDV
PROG50-40N RH67 PDV
PROG50-40N RH67 PDV
PROG50-40N RH67 PDV
Vent & Combustion Air-InletMin. Allowed Equiv. Vent & CombustionMax. Allowed Equiv. Vent & Combustion
Vent and Combustion
System Diameter (Inches)
Air-Inlet Lengths – Each Pipe Run (Ft.)
Air-Inlet Lengths – Each Pipe Run (Ft.) Air-Inlet System Termination(s)
40
Air-Inlet and Venting Information
From 7,701 ft. Above Sea Level Through 10,200 ft. Above Sea Level
Model
PROG40-40N RH67 PDV
PROG40-40N RH67 PDV
PROG40-40N RH67 PDV
PROG50-40N RH67 PDV
PROG50-40N RH67 PDV
Vent & Combustion Air-InletMin. Allowed Equiv. Vent & CombustionMax. Allowed Equiv. Vent & Combustion
Vent and Combustion
System Diameter (Inches)
Air-Inlet Lengths – Each Pipe Run (Ft.)
Air-Inlet Lengths – Each Pipe Run (Ft.) Air-Inlet System Termination(s)
2
3
3
3
3
7
7
7
7
7
15
60
50
60
50
–
90° Elbows
–
90° Elbows
–
Concentric*
–
Concentric*
–
Concentric*
One 90° elbow is approximately equivalent to 5 feet of pipe. One 45° elbow is approximately equivalent to 2.5 feet of pipe.
* Use only Rheem 3 inch concentric termination.
41
Professional Classic™ Direct Vent
Efficiency
• .60 - .62 EF
•W
ell insulated for reduced stand-by heat loss
Performance
Technology
• Adjustable coaxial vent allows
­flexibility of ­installation, can
swivel 360 degrees and uses
outside air for c
­ ombustion and
­requires no electrical power
• Aluminum vent and cap base to ­prevent
­staining of building exterior
Longer Venting
•U
p to 4 feet above the water heater and 4 feet
from an o
­ utside wall
•O
rder Horizontal Vent Kit: #SP20131
•O
rder Vertical Vent Kit: #SP20132
• Meets 40 ng/J NOx ­requirements
Longer Life
• Premium grade anode rod provides long-lasting
tank protection
Plus…
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
• Exclusive Rheemglas® tank lining resists
­corrosion and prolongs tank life
• Heat saving flue baffle design
• Gas control and combination t­hermostat
• Piezo ignition
• High temperature silicone bands reduce venting
installation time
• Internal air tube for reduced footprint
• EverKleen™ patented system fights sediment
build-up
Warranty
•6
-Year limited tank and parts ­warranty*
•W
ith ProtectionPlus™ the 6-year limited tank
warranty becomes 10-year
*See Residential Warranty Certificate for ­complete
information
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
Gas Tank-Type
•F
HR: 80 gallons for 50-gallon model and
66 gallons for 40-gallon model
• Recovery: 30.3 to 36.4 GPH at a 90° F rise,
depending on model
Low Emissions
Altitude Certification
• All models certified up to 5,999 ft. above sea
level
42
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
ENERGY INFO.
T
HT. TO
HT. TO
GAS INPUT IN
RECOVERY IN
FIRST HOUR
ENERGY
Y
NATURAL GAS
HT. TO
TANK
GAS VENT
SIDE T&P
SHIP.
THOUS. BTU/H
G.P.H. 90° RISE
DEL. G.P.H.
FACTOR
P GAL.MODEL
VENT
HT.
DIAM. CONN. SIZE
VALVE WT.
E CAP. NUMBER*
NAT.
LP
NAT.
LP
NAT.
LP
AB
C
D
E
F
(LBS)
NAT.
LP
Tall
40 PROG40-36N RH62 DV
36
30
36.4
30.3
66
66
68-1/4
60-7/8
19-3/4
14-1/4
6
51-5/8
155
0.62
0.62
Tall
50 PROG50-36N RH60 DV
36
33
36.4
33.3
80
80
68
59-5/8
21-3/4
14-1/4
6
52-1/2
165
0.60
0.60
*Refer to Specification Sheet on Rheem.com for LP model numbers.
Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.
VENTING – ROUGHING IN DIMENSIONS (INCHES)
MODEL
4 FEET VENTING
TYPE NUMBER
AVAILABLE
SIDE VENTING (G) WITH
INCLUDED VENT KIT
MIN.
MAX.
E
G
SIDE VENTING (G) WITH
OPTIONAL VENT KIT
OPTIONAL HEIGHT (A)
MIN.
MAX.
WITH VENT KIT
Tall
PROG40-38N RH62 DV
Horiz. & Vertical 9-1/8
19-1/8
9-1/8
48**
68-1/4 – 107-3/4†
Tall
PROG50-38N RH60 DV
Horiz. & Vertical 8-1/8
18-1/8
8-1/8
48**
68 – 107†
**Horizontal Vent Kit #SP20131 for applications up to 2,000 ft. above sea level. Optional horizontal venting not
­applicable for installations above 2,000 ft. Venting dimensions are approximate.
†
Vertical Vent Kit #SP20132. Venting dimensions are approximate.
10"
COLD WATER
CONNECTION
(G: SIDE VENTING
RANGE OF
ADJUSTMENT)
3/4" N.P.T.
RELIEF VALVE
OPENING
A
C
B
HOT WATER
CONNECTION
F
1/2"
D
EXTERIOR
WALL
43
Professional Classic™ Ultra Low NOx
Efficiency
• .60 - .63 EF
•M
ore hot water at a low operating cost
Performance
Guardian System™ & Sensor
•E
xclusive air/fuel shut-off device for ­double
protection
• Maintenance free – no filter to clean
• Disables the heater in the presence of
flammable vapor accumulation
Low Emissions
•U
ltra Low NOx radiant burner design
•S
tainless steel construction
• SCAQMD Rule 1121 compliant
• Meets 10 ng/J NOx requirements
Self-Cleaning
•E
verKleen™ patented system fights ­sediment
build-up
• Reduces fuel costs
• Provides more hot water
• No matches required ­
Longer Life
• Premium grade anode rod provides long-lasting
tank protection
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
High Altitude Compliant
• All models certified up to 5,999 ft. above sea
level
• 38-Gallon short model certified up to 8,400 ft.
above sea level
Gas Tank-Type
•F
HR: 53 - 91 gallons for natural gas
• Recovery: 30.3 to 40.4 GPH at a 90° rise,
­depenting on model
Easy to Light
Plus…
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
• Exclusive Rheemglas® lining
Warranty
• 6-Year limited tank and parts w
­ arranty*
• With ProtectionPlus™ the 6-year limited tank
warranty becomes 10-year
*See Residential Warranty Certificate for ­complete
information
LEED Point = 1
44
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
T
Y
GAS INPUT IN
RECOVERY IN FIRST HOUR
HT. TO
TANK
P GAL. MODEL
THOUS. BTU/H G.P.H. 90° RISE DEL. G.P.H.
VENT
HT.
DIAM.
E CAP.NUMBER
NAT.
NAT.
NAT.
AB
C
HT. TO
GAS
VENT
CONN.
SIZE
D
E
WATER
CONN.
CNTR.
F
HT. TO
SIDE T&P
VALVE
G
ENERGY INFO.
WATER
CONN.
SHIP.
sizeWT.
H
(LBS)
ENERGY
FACTOR
NAT.
Tall
28 PROG28-30U RH63
30
30.3
53
58-7/8
56-1/8 16-1/2 17-1/2 3 or 4
8
50-1/8
3/4
114
0.63
Tall
38 PROG38-38U RH62
38
38.4
72
60-1/2
57-3/4
17-1/2 3 or 4
8
51-3/4
3/4
141
0.62
Tall
48 PROG48-40U RH60
40
40.4
91
60-5/8
57-7/8 20-1/2 17-1/2 3 or 4
8
51-3/4
3/4
163
0.60
36
36.4
68
51-7/8
49-1/8
8
43
3/4
150
0.62
Short 38 PROG38S-36U RH62
19
21
17-1/2 3 or 4
Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.
FLUE
ANODE ROD
H
H
HOT
WATER
CONNECTION
F
E
COLD
WATER
CONNECTION
3/4" N.P.T.
RELIEF
VALVE
OPENING
C
A B
1/2"
G
D
45
Professional Classic™ Power Vent Ultra Low NOx
Efficiency
Flexible Venting Options
Performance
Longer Life
• .67 EF
•E
nergy Star® rated
•M
ore hot water at a low operating cost
Guardian System™ & Sensor
•E
xclusive air/fuel shut-off device for ­double
protection
• Maintenance free – no filter to clean
• Disables the heater in the presence of
flammable vapor accumulation
Low Emissions
•U
ltra Low NOx radiant burner design
•S
tainless steel construction
• SCAQMD Rule 1121 compliant
• Meets 10 ng/J NOx requirements
Self-Cleaning
•E
verKleen™ patented system fights ­sediment
build-up
• Reduces fuel costs
• Provides more hot water
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
• Premium grade anode rod provides long-lasting
tank protection
Gas Tank-Type
•F
HR: 72 - 94 gallons for natural gas
• Recovery: 36.4 to 38.4 GPH at a 90° F rise,
depending on model
• Long venting lengths up to 100 feet
• PVC, ABS, or CPVC vent pipe options
• Vertical or horizontal termination
High Altitude Compliant
• Certified to 5,999 ft. above sea level
Plus…
• Whisper quiet blower
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
• Durable spark-to-pilot ignitor
Warranty
• 6-Year limited tank and parts w
­ arranty*
• With ProtectionPlus™ the 6-year limited tank
warranty becomes 10-year
*See Residential Warranty Certificate for ­complete
information
LEED Point = 1
46
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
T
Y
GAS INPUT IN
RECOVERY IN
FIRST HOUR
P GAL. MODEL
THOUS. BTU/H
G.P.H. 90° RISE
DEL. G.P.H.
E CAP.NUMBER
NAT.
NAT.
NAT.
HT. TO
TOP OF
TANK
ASSEMBLY
HT.
DIAM.
AB
C
HT. TO
GAS
CONN.
D
WATER
CONN.
CNTR.
E
HT. TO
SIDE T&P
VALVE
F
ENERGY INFO.
WATER
CONN.
SHIP.
ENERGY
sizeWT.
FACTOR
G
(LBS)
NAT.
Tall 40 H PROG40-36U RH67 PV
36
36.4
72
69-3/4
60
21
17-3/8
8
54
3/4
170
0.67
Tall 50 H PROG50-38U RH67 PV
38
38.4
94
69-1/2
59-3/4
23
17-3/8
8
53-3/4
3/4
200
0.67
Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.
H Energy Star® compliant model.
Maximum and Minimum Vent Lengths for 2” Vents
Maximum and Minimum Vent Lengths for 3” Vents
NumbER OF
MINIMUM MAXIMUM
90° ELBOWS
NUMBER
PIPE PIPE
with Vent OF 45° lengthlength
Terminal
Elbows
req. (ft.)
(ft.)
NumbER OF
MINIMUM MAXIMUM
90° ELBOWS
NUMBER
PIPE PIPE
with Vent OF 45° lengthlength
Terminal
Elbows
req. (ft.)
(ft.)
One (1)
None
One (1)
None
3.0
44.0
3.0
95.0
One (1)
One (1)
3.0
41.0
One (1)
One (1)
3.0
92.5
Two (2)
None
3.0
38.0
Two (2)
None
3.0
90.0
Two (2)
One (1)
3.0
35.0
Two (2)
One (1)
3.0
87.5
Three (3)
None
3.0
32.0
Three (3)
None
3.0
85.0
For the 2” vent, one 90° elbow is approximately equal to 6 feet of pipe.
One 45° elbow is approximately equal to 3 feet of pipe.
Three (3)
One (1)
3.0
82.5
Four (4)
None
3.0
80.0
NOTICE: The mixing of 2” and 3” vent pipe is not recommended. If 3” pipe is used,
a 2” to 3” reducer fitting is recommended at the rubber coupling.
Four (4)
One (1)
3.0
77.5
Five (5)
None
3.0
75.0
This water heater is supplied with a 2” Schedule 40 PVC 45° vent t­ erminal.
When venting with 3” pipe, a Schedule 40 PVC 45° vent ­terminal must be used.
Screens for both 2” and 3” vent terminals have been included.
For the 3” vent, one 90° elbow is approximately equal to 5 feet of pipe.
One 45° elbow is approximately equal to 2.5 feet of pipe.
POWER VENT
ASSEMBLY
ANODE ROD
G
G
HOT
WATER
CONNECTION
E
COLD
WATER
CONNECTION
T&P FITTING
3/4" N.P.T.
C
A B
F
1/2"
D
47
Professional Classic™ Atmospheric for Manufactured Housing
Efficiency
• .62 - .63 EF
Performance
Longer Life
•P
remium grade anode rod provides long-lasting
tank protection
Guardian System™ & Sensor
•E
xclusive air/fuel shut-off device
•M
aintenance free – no filter to clean
•D
isables the heater in the presence of
flammable vapor accumulation
Flexibility
•F
ield convertible controls and burner
­assembly for natural gas or LP operation
included
Low Emissions
• Eco-friendly burner, low NOx design
• Up to 8,400 ft. above sea level for the 40-gallon
model
• Up to 5,999 ft. above sea level for the 29-gallon
model
• High altitude models available for 29-gallon
Plus…
• Certified for manufactured (HUD) and m
­ odular
construction
• Enhanced-flow brass drain valve
• Side inlet temperature and pressure relief valve
opening
• Factory installed temperature and pressure relief
valve – side location
• Low lead compliant
• Two hole top for anode rod and hot water outlet
• Exclusive Rheemglas® tank lining resists
­corrosion and prolongs tank life
• Piezo ignition – easy light pilot, no matches
required
• Cold water inlet – side connection a
­ llows for
quick, ­economical hook-up
• Optional leg kit for replacement units
• EverKleen™ patented system fights sediment
build-up
Warranty
•6
-Year limited tank and parts ­warranty*
*See Residential Warranty Certificate for ­complete
information
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
Draft Diverter
Improved design p
­ rovides
­efficient ­heating with
down-draft p
­ rotection.
Gas Tank-Type
•F
HR: 59 gallons for 40-gallon model and 58
gallons for 29-gallon model
•R
ecovery: 30.3 to 34.3 GPH at a 90° F rise,
depending on model
Altitude Certification
48
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
T
GAS INPUT IN
RECOVERY IN
FIRST HOUR
Y
HT. TO
TANK
THOUS. BTU/H
G.P.H. 90° RISE
DEL. G.P.H.
P GAL.MODEL
VENT
HT.
DIAM.
E CAP. NUMBER
NAT.
LP
NAT.
LP
NAT.
LP
AB
C
HT. TO
GAS
VENT
CONN.
SIZE
D
E
WATER
CONN.
CNTR.
F
ENERGY INFO.
HT. TO
SIDE T&P
SHIP.
VALVE
WT.
G
(LBS)
ENERGY
FACTOR
Tall
29 PROG30-32N RH63 MH
32
30
32.3
30.3
58
58
59-5/8
56-7/8
16-12
14-3/8
3 or 4
8
50-7/8
110
0.63
Tall
40 PROG40-34N RH62 MH
34
32
34.3
32.3
59
59
61-1/2
58-1/2
18-1/2
14-3/8
3 or 4
8
52-1/4
125
0.62
Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.
FLUE
3/4" N.P.T.
Roof Jacks
Roof Opening
Part No.to Floor Dim.
Roof Jack
Adj. Range
AP12118B*
98" Min./126" Max.
16" Min./32"Max.
AP12118C*
112" Min./154" Max.
30" Min./60" Max.
AP12118D*
130" Min./189" Max.
48" Min./95" Max.
AP12119B†
94" Min./106" Max.
12"
* Adjustable length roof jacks
†Fixed length roof jacks
Roof jack must be ordered separately with 29 and 40-gallon atmospheric m
­ odels
and must be in ­accordance with instructions furnished with the heater. Clamps
and secure strapping are packed in water heater carton.
ANODE ROD
HOT
WATER
CONNECTION
F
E
C
A B
1/2"
D
3/4" N.P.T.
RELIEF
VALVE
OPENING
COLD
WATER
CONN.
3/4"
N.P.T.
G
20-1/8"
49
Professional Classic™ Direct Vent for Manufactured Housing
Efficiency
• .62 - .63 EF
Performance
• FHR: 64 gallons for 40-gallon model and 49
gallons for 30-gallon model
• Recovery: 30.3 GPH at a 90° F rise
• Field convertible controls for natural gas or LP
operation included
• No external door is required
• Provides maximum design freedom since it can
be placed anywhere within the home
• Hot water outlet located at top
• Cold water inlet at side for fast, economical
hook-up
Altitude Certification
• All models certified up to 5,999 ft. above sea
level
Longer Life
• Certified for manufactured (HUD) and m
­ odular
construction
• Piezo ignition – easy light pilot
• Enhanced-flow brass drain valve
• Factory installed temperature and pressure relief
valve – side location
• Low lead compliant
• EverKleen™ patented system fights sediment
build-up
Warranty
• 6-Year limited tank and parts w
­ arranty*
*See Residential Warranty Certificate for ­complete
information
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
Adjustable Roof
Jack Vent
Design allows a
­ djustment
to roof pitches of up to
5/12". Four roof
jacks ­available to
­accommodate roof
­thickness of 12" up to 95".
Direct Combustion
Air Inlet
Air is drawn directly into
­combustion chamber
through air inlet fixed
to base; 1/2" screen for
rodent p
­ rotection.
Gas Tank-Type
Flexibility
Plus…
•P
remium grade anode rod provides long-lasting
tank protection
50
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
T
Y
GAS INPUT IN
RECOVERY IN FIRST HOUR
HT. TO
TANK
P GAL. MODEL
THOUS. BTU/H G.P.H. 90° RISE DEL. G.P.H.
VENT
HT.
DIAM.
E CAP.NUMBER
NAT./LP
NAT./LP
NAT./LP
AB
C
HT. TO
GAS
VENT
CONN.
SIZE
D
E
ENERGY INFO.
ROOF HT. TO
WATER
JACK
SIDE T&P CONN. SHIP.
VENT SIZE
VALVE
sizeWT.
F
G
H
(LBS)
ENERGY
FACTOR
NAT./LP
Tall
30 PROG30-30N RH63 MH DV
30
30.3
49
56-5/8
56-5/8 17-3/4 14-1/8
3
5
51-1/8
20
110
0.63
Tall
40 PROG40-30N RH62 MH DV
30
30.3
64
57-3/8
57-3/8 19-3/4 14-1/8
3
5
51-1/8
20
125
0.62
Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.
ADJUSTS TO PITCHES
OF UP TO 5/12"
Roof Jacks
12" Non-Adjustable & Air Inlet 15-32" Adjustable & Air Inlet
30-60" Adjustable & Air Inlet
48-95" Adjustable & Air Inlet
AP12032E
AP12032B
AP12032C
AP12032D
F
24" MIN.
E
AIR INLET
6" Non-Adjustable
11-22" Adjustable
AP12019B
AP12017B
EXTENSION PIPE KIT
Roof Jack Extension Pipe Kit
AP12021
Roof jack and air inlet must be ordered separately with 30
and 40-gallon direct vent models and must be in accordance
with instructions furnished with the heater. No other roof jack
or air inlet assemblies are approved for installation with this
heater. Clamps and secure strapping are packed in water
heater carton.
A
B
0" MIN.
WALL
CLEARANCE
C
RELIEF
VALVE
COLD
WATER
CONN.
G
1/2"
D
WATER CONNECTIONS
ALL 3/4" N.P.T.
2"
H
51
Professional Classic™ Direct Vent Co-Axial for Manufactured Housing
Efficiency
• .60 - .62 EF
Performance
Flexibility
•F
ield convertible controls and burner
­assembly for natural gas or LP operation
included
•R
oof jack flange adjustment range available
up to 34° (8 - 12)
•N
ew smaller foot print – no external air tube
• Can be installed anywhere in the home
•3
/4” hot and cold top connections
•E
asily fits into a standard drain pan
Altitude Certification
•A
ll models certified up to 7,700 ft. above
sea level
Longer Life
TOP VIEW OF CLOSET
• EverKleen™ patented system fights sediment
build-up
Plus…
• Certified for manufactured (HUD) and m
­ odular
construction
• Enhanced-flow brass drain valve
• Factory installed temperature and pressure
relief valve – side location
• Low lead compliant
• Piezo ignition – easy light pilot, no matches
required
Warranty
• 6-Year limited tank and parts w
­ arranty*
*See Residential Warranty Certificate for ­complete
information
CONNECTIONS
GAS CONTROL
(THERMOSTAT)
CONNECTIONS
RELIEF
VALVE
Gas Tank-Type
•F
HR: 80 gallons for 50-gallon model and
65 gallons for 40-gallon model
•R
ecovery: 30.3 to 36.4 GPH at a 90° F rise,
depending on model
Self Cleaning
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
•P
remium grade anode rod provides long-lasting
tank protection
52
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
ENERGY INFO.
T
GAS INPUT IN
RECOVERY IN
FIRST HOUR
Y
TANKVENT
SHIP.
ENERGY
THOUS. BTU/H
G.P.H. 90° RISE
DEL. G.P.H.
P GAL.MODEL
DIAM. HT. SIZEWATER
WT.
FACTOR
E CAP. NUMBER
NAT.
LP
NAT.
LP
NAT.
AB
C
CONNECTION
(LBS)
NAT./LP
Tall
40 PROG40-36N RH62 MH DVX
36
30
36.4
30.3
65
19-3/4
60-1/2
5
3/4
155
0.62
Tall
50 PROG50-36N RH60 MH DVX
36
32
36.4
32.3
80
21-3/4
59-5/8
5
3/4
165
0.60
Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.
FRONT VIEW
Roof Jack
(Purchased Separately)
ADJUSTABLE TILT
ROOF FLANGE
Co-Axial Roof Jack Sizing Table
34° MAX. (8 – 12 PITCH)
ROOF JACK
KIT PART NO.
ROOF JACK
ADJUSTMENT
RANGE (SEE X)
AP14363A
24 - 37"
AP14363B
33 - 68"
AP14363C
45 - 97"
AP14363D
60 - 130"
AP14363E
72 - 160"
NOTE: 42° Max. adjustment roof jacks available. Roof Jacks
must be ordered separately with this direct vent water heater
and installed in accordance with the instructions furnished with
the heater. No other roof jack or vertical vent kit is approved for
installation with this heater.
Roof Jack
Adjustment Range
X
C
34° MAX.
(8 - 12 PITCH)
12"
Min
A
42° MAX. TILT IS
AVAILABLE WITH
OPTIONAL KIT
(10-3/4 - 12 PITCH)
B
53
Prestige™ High Efficiency Condensing Tankless
Efficiency
• .92 - .94 EF with stainless steel condensing heat
exchanger
•E
nergy Star® rated
• Intelligent electronic controls designed to increase
energy efficiency and safety
• Third party efficiency listed by AHRI
• Industry First! 0.26 GPM minimum flow rate,
0.40 GPM minimum activation flow rate
•S
CAQMD rule 1146.2 compliant
• RTGH-95 for 3 bathroom homes*– 9.5 gal./min.
at 35°F rise max., 8.4 gal./min. at 45°F rise
• RTGH-90 for 2-3 bathroom homes*– 9.0 gal./
min. at 35°F rise max., 7.5 gal./min. at 45°F rise
• RTGH-84 for 2-3 bathroom homes*– 8.4 gal./min.
at 35°F rise max., 6.6 gal./min. at 45°F rise
*Based on simultaneous showers using 2.5 ­gallons per
minute. Flow rates vary depending on t­emperature of cold
water supply.
Compact Size
•C
ompact space saving design – about the size
of a medicine cabinet
• Self-diagnostic system for easy i­nstallation and service
• Digital display shows temperature ­setting and
maintenance codes
Technology
• Two-pipe direct vent system designed for PVC
pipe (up to 38 ft. of 3” PVC Pipe or 5 ft. of 2”
PVC Pipe). See instructions for details
• Hot start programming helps m
­ inimize fl­ uctuation
in water temperature, referred to as “cold water
sandwich,” during periods of frequent on/off
operation
• Built-in electric blower
• Exclusive! Guardian overheat film wrap (OFW)
• EZ-Link cable available for higher demand
applications to connect two tankless units to
operate as one
• Manifold up to six units with an ­optional MIC-6
manifold control board
• Manifold up to 20 units with the optional
MIC-185 plus the MICS-180 manifold control
assembly
Indoor Direct Vent
Plus…
• Digital remote control and 10 ft. of thermostat
wire included
• Supplied with a 120 volt power cord
(indoor models only)
• Freeze protection to -30°F
• Low lead compliant
• Required manual gas isolation valve included
­ dvanced online
• EZ-Spec™ Sizing Software – a
tool that takes the guess work out of sizing
tankless a
­ pplications – available at
www.rheem.com/tankless
Warranty
• 12-Year limited heat exchanger, 5-year limited
parts warranty*
­ arranty*
• 1-Year labor w
*See Residential Warranty Certificate for ­complete
­information
High Altitude Compliant
• High-altitude capability – up to 9,840 ft. e
­ levation
above sea level
Tankless Gas
Performance
Self-Diagnostic System
Outdoor
LEED Points = 2
54
DESCRIPTION
FEATURES
GAS MODEL INPUT
TEMP.
NUMBERBTU/H
TYPE
RANGE
H RTGH-95DVLN
11,000-
199,900
H RTGH-95XLN
Indoor
Direct Vent
MIN. FLOW/ GPM @
ACTIVATION 77° RISE
GPM
MAX.
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
ENERGY INFO.
GPM @
SHIP.
CONNECTION
45° RISE MAX.
VENT
WEIGHT
ENERGY Recovery
MAX.
GPM WATER GAS HEIGHT WIDTH DEPTH
DIAM.
(LBS.)
FACTOR
EFFICIENCY
85° to
0.26/0.40
4.9
8.4
9.5
3/4
3/4 27-1/2 18-1/2 9-3/4 2” or 3”
140° F
PVC 2-Pipe
82
.94
94%
11,000-
Outdoor
199,900
85° to
0.26/0.40
4.9
8.4
9.5
3/4
3/4 27-1/2 18-1/2 9-3/4
140° F
82
.94
94%
H RTGH-90DVLN
11,000-
180,000
85° to
0.26/0.40
4.4
7.5
9.0
3/4
3/4 27-1/2 18-1/2 9-3/4 2” or 3”
140° F
PVC 2-Pipe
82
.93
93%
H RTGH-90XLN
11,000-
Outdoor
180,000
85° to
0.26/0.40
4.4
7.5
9.0
3/4
3/4 27-1/2 18-1/2 9-3/4
140° F
82
.93
93%
H RTGH-84DVLN
11,000-
157,000
85° to
0.26/0.40
3.9
6.6
8.4
3/4
3/4 27-1/2 18-1/2 9-3/4 2” or 3”
140° F
PVC 2-Pipe
82
.92
92%
H RTGH-84XLN
11,000-
Outdoor
157,000
85° to
0.26/0.40
3.9
6.6
8.4
3/4
3/4 27-1/2 18-1/2 9-3/4
140° F
82
.92
92%
Indoor
Direct Vent
Indoor
Direct Vent
N/A
N/A
N/A
Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.
H Energy Star® compliant model.
All models are available in Natural Gas and Propane (LP). For Propane replace N” with P” in model number. Example RTGH-95DVLP.
• ­SCAQMD 1146.2 compliant.
• ­Factory set maximum temperature is 120° F. See Use and Care Manual for setting.
• Consult factory for information on sizing the application.
• Add a C” to the model number when ordering Canadian models. Outdoor models are only for seasonal use in Canada. Please contact Rheem Canada Ltd. for details.
Vent Termination Kits are required for Direct Vent models. Contact your distributor for details.
Proper gas pressure must be ensured to supply tankless gas water heaters – up to 199,900 Btu/h for RTGH-95 models, up to 180,000 Btu/h for RTGH-90 models
and up to 157,000 Btu/h for RTGH-84 models. (Consult your gas supplier)
• Approved for use with Centroitherm Polypropylene venting (U.S. and Canada).
55
Mid-Efficiency Tankless Ultra Low NOx
Efficiency
• .82 EF
• Intelligent electronic controls designed to
increase energy efficiency and safety
• Third party efficiency listed by AHRI
Performance
*Based on simultaneous showers using 2.5 ­gallons per
minute. Flow rates vary depending on t­emperature of
cold water supply.
Self-Diagnostic System
•S
elf-diagnostic system for easy ­installation and
service
• Digital display shows temperature s­ etting and
maintenance codes
• 3”/5” concentric vent system with Integrated
condensate collector
• Hot start programming helps m
­ inimize
­fluctuation in water temperature, referred to
as cold water sandwich”, during periods of
frequent on/off operation
• Connects to Metal Fab. Inc., 3”/5” concentric
venting without an adapter
• Built-in electric blower
• Exclusive! Guardian overheat film wrap (OFW)
• EZ-Link cable available for higher demand
applications to connect two tankless units to
operate as one
• Manifold up to six units with an ­optional MIC-6
manifold control board
• Manifold up to 20 units with the optional
MIC-185 plus the MICS-180 manifold control
assembly
Plus…
• Digital remote control and 10 ft. of thermostat
wire included
• Supplied with a 120 volt power cord
(indoor models only)
• Freeze protection to -30°F
• Low lead compliant
­ dvanced online
• EZ-Spec™ Sizing Software – a
tool that takes the guess work out of sizing
tankless a
­ pplications – available at
www.rheem.com/tankless
Tankless Gas
• Industry First! 0.26 GPM minimum flow rate,
0.40 GPM minimum activation flow rate
• RTG-95 for 3 bathroom homes*– 9.5 gal./min.
at 35°F rise max., 8.4 gal./min. at 45°F rise
• RTG-84 for 2-3 bathroom homes*– 8.4 gal./min.
at 35°F rise max., 6.6 gal./min. at 45°F rise
• RTG-64 for 1-2 bathroom homes*– 6.4 gal./min.
at 35°F rise max., 5.6 gal./min. at 45°F rise
Technology
Indoor Direct Vent
Warranty
• 12-Year limited heat exchanger, 5-year limited
parts warranty*
­ arranty*
• 1-Year labor w
*See Residential Warranty Certificate for ­complete
information
Low Emissions
• Environmentally friendly Ultra Low NOx burner
meets SCAQMD rule 1146.2 requirements
High Altitude Compliant
• High-altitude capability – up to 9,840 ft.
­elevation above sea level
Outdoor
LEED Points = 2
56
DESCRIPTION
FEATURES
GAS MODEL INPUT
TEMP.
NUMBERBTU/H
TYPE
RANGE
RTG-95DVLN
11,000-
199,900
RTG-95XLN
Indoor
Direct Vent
MIN. FLOW/ GPM @
ACTIVATION 77° RISE
GPM
MAX.
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
ENERGY INFO.
GPM @
SHIP.
CONNECTION
45° RISE MAX.
VENT
WEIGHT
ENERGY RECOVERY
MAX.
GPM WATER GAS HEIGHT WIDTH DEPTH
DIAM.
(LBS.)
FACTOR
EFFICIENCY
85° to
0.26/0.40
4.3
7.4
9.5
3/4
3/4 25-5/8 13-7/8 9-7/8
3 by 5
140° F
Concentric
54
.82
84%
11,000-
Outdoor
199,900
85° to
0.26/0.40
4.3
7.4
9.5
3/4
3/4 23-5/8 13-7/8 8-7/8
140° F
54
.82
83%
RTG-84DVLN
11,000-
180,000
85° to
0.26/0.40
3.9
6.7
8.4
3/4
3/4 25-5/8 13-7/8 9-7/8
3 by 5
140° F
Concentric
54
.82
84%
RTG-84XLN
11,000-
Outdoor
180,000
85° to
0.26/0.40
3.9
6.7
8.4
3/4
3/4 23-5/8 13-7/8 8-7/8
140° F
54
.82
83%
RTG-64DVLN
11,000-
150,000
85° to
0.26/0.40
3.3
5.6
6.4
3/4
3/4 25-5/8 13-7/8 9-7/8
3 by 5
140° F
Concentric
54
.82
84%
RTG-64XLN
11,000-
Outdoor
150,000
85° to
0.26/0.40
3.3
5.6
6.4
3/4
3/4 23-5/8 13-7/8 8-7/8
140° F
54
.82
83%
Indoor
Direct Vent
Indoor
Direct Vent
N/A
N/A
N/A
Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.
All models are available in Natural Gas and Propane (LP). For Propane replace N” with P” in model number. Example RTG-95DVLP.
• ­SCAQMD 1146.2 compliant.
• ­Factory set maximum temperature is 120° F. See Use and Care Manual for setting.
• Consult factory for information on sizing the application.
• Add a C” to the model number when ordering Canadian models. Outdoor models are only for seasonal use in Canada. Please contact Rheem Canada Ltd. for details.
Vent Termination Kits are required for Direct Vent models. Contact your distributor for details.
Proper gas pressure must be ensured to supply tankless gas water heaters – up to 199,900 Btu/h for RTG-95 models, up to 180,000 Btu/h for RTG-84 models and up to 150,000 Btu/h
for RTG-64 models. (Consult your gas supplier)
57
Professional Prestige™ Hybrid Heat Pump
™
enabled for
• EcoNet
­integration with home
­automation, energy
management and demand
response systems
2.00 Hrs.
so
r
110
/h
tu
7B
:
or
tit
pe
es
pr
m
m
115
3.00 Hrs.
r
so
pr
es
120
Co
• Premium grade anode rod provides long-lasting
tank protection
• 3/4” NPT water inlet, outlet and condensate
drain connections
• Incoloy stainless steel resistor ­elements
• Dry-fire protection
• Easy access, top mounted washable air filter
• 2-1/2” Non-CFC foam insulation
• Improved flow brass drain valve
• Temperature and pressure relief valve
• Low lead compliant
Time it Takes to Heat Tank
130
u/
h
Plus…
Heat Pump Only Mode: Tank Recovery
Rheem Hybrid (50 gal) vs. Competitor Hybrid (50 gal)
Bt
• Energy Saver
• Heat Pump Only
• High Demand
• Electric Heat Only
•V
acation: 2-28 days (or placed on hold indefinitely)
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
0
Operation Modes
*See Residential Warranty Certificate for ­complete
information
70
• Intuitive, back lit touch screen with diagnostics
• 12-Year limited tank and parts warranty*
:8
Full-Color LCD Display
Warranty
Co
1
47
Electric Tank-Type
• 8700 Btu/h compressor: the most powerful in
its class – more heat can be created by the heat
pump and less by the costly electric e
­ lements.
This translates into significant fuel saving in
real life applications. For still more s­ avings, the
Rheem hybrid has a wider temperature o
­ perating
range, which means the heat pump can be used
to heat water more days throughout the year.
• Ambient operating range: 37-120° F is widest
in class, offering more days of HP operation
annually; designed to meet Northern Climate
Spec (Tier 1)
• Easy access side connections
• Narrow 21” diameter, fits through a
­ ccess doors
• Easily replaces a standard electric water heater
m
Performance
Easy Installation
Rh
ee
•2
.45 EF reduces operating cost
•E
nergy Star® rated
Temperature Rise (Degrees Fahrenheit)
Efficiency
m
Co
33% Faster
100
90
.5
1
1.5
2
2.5
Hours to Recover
LEED Points = 3
3
3.5
58
DESCRIPTION
Features
T
Y
P GAL. MODEL
COMPRESSOR
E CAP. NUMBERBTU/H
Tall 50 H HB50RH
FIRST HOUR
RATING
G.P.H.
8700
57
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
RECOVERY
IN G.P.H. HEIGHT
DIAMETER
UNIT
90° F RISE
AB
WT. (LBS)
21
75-1/2
21
180
ENERGY INFO.
APPROX.
SHIP WT.
(LBS) ENERGY
SAVER
226
2.45 EF
Energy Factor based on D.O.E. (Department of Energy) test procedures.
H Energy Star® compliant model.
Full-Color LCD Display Screens
B
8" Top clearance
for air circulation
3/4" water connections
208-230 Volt – 1 PH
Max amp draw –
24 amps
Start Up Screen
T&P
VALVE
Press Standby” to start
HOT
OUTLET
A
Energy Saver Mode 1
Best energy efficiency for typical
hot water demands
Home Screen
Factory set to default to the
Energy Saver” mode screen
DRAIN
VALVE
21.855”
COLD
INLET
59
Professional Prestige™
Efficiency
• .95 EF
• Isolated tank design reduces ­conductive
heat loss
• D
ual 5500 watt stainless steel heating elements
•F
HR: 58 - 68 gallons based on gallon capacity
• Recovery rate is 25 gallons at a 90 degree rise
Super Sentinel Diagnostic System
•S
imple easy to read diagnostics
•C
ontrols multiple operating models
•D
igital thermostat setting
•L
eak protection with audible alarm
™
enabled for
• EcoNet
­integration with home
­automation, energy
management and demand
response systems
• High performance and lower o
­ perating cost
• Compliant with many electric utility incentive
programs
• Premium grade anode rod provides long-lasting
tank protection
• Electric junction box located above heating
­elements for easy installation
• Over-temperature protector cuts off power in
excess temperature s­ ituations
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
Electric Tank-Type
Performance
Features
Plus…
• EverKleen™ self cleaning device fights harmful
sediment build-up with a ­high-­velocity spiraling
water stream – helps operating e
­ fficiency by
saving ­energy, money and improving tank life
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
Warranty
• 12-Year limited tank and parts w
­ arranty*
*See Residential Warranty Certificate for ­complete
information
LEED Point = 1
60
DESCRIPTION
T
Y
P GAL. MODEL
E CAP. NUMBER
Features
FIRST HOUR
RATING
G.P.H.
RECOVERY
IN G.P.H. 90° F RISE
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
TANK
HEIGHT TO
HEIGHT
WATER CONN.
DIAMETER
AB
C
ENERGY INFO.
APPROX.
SHIP WT.
(LBS) ENERGY
FACTOR
Tall
40 PROPE40 T2 RH95 EC2
58
25
60-3/4
63-5/8
18-1/4
105
0.95
Tall
50 PROPE50 T2 RH95 EC2
68
25
58-5/8
61-5/8
20-1/4
121
0.95
Energy Factor based on D.O.E. (Department of Energy) test procedures.
Super Sentinel not available on single e
­ lement models, available on dual ­element models only. Super Sentinel not a
­ vailable in excess
of 5 kW on 208 V models.
• Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 4500 watt upper and lower heating elements.
**Recovery = wattage/2.42 x temp. rise °F.
Example: 4500W
= 21 GPH
2.42 x 90°
8"
HOT
WATER
CONNECTION
COLD
WATER
CONNECTION
RELIEF VALVE
CONNECTION
C
**Recovery calculations used are based on 4500 watt elements used in non-simultaneous operation.
ANODE
ROD
DIAMETER
A
B
WATER CONNECTIONS ALL 3/4" N.P.T.
61
Professional Classic Plus™
Efficiency
Performance
•F
HR: 44 - 71 gallons, based on gallon capacity
• Recovery: 21 GPH at a 90° F rise
System Sentinel
•E
xclusive diagnostic system with ­glowing LEDs
that verify heating element operation. LEDs pin
point the exact location of functioning or ­­nonfunctioning heating elements
Super Sentinel Diagnostics System
(Optional)
• Control multiple operating modes
• Digital thermostat setting
• Leak detection with audible alarm
Features
• High performance and lower operating cost
• Compliant with many electric utility incentive
programs
• Premium grade anode rod provides long-lasting
tank protection
• Electric junction box located above heating
­elements for easy installation
• Over-temperature protector cuts off power in
excess temperature situations
• Automatic thermostat keeps water at desired
­temperature
Plus…
• EverKleen™ self cleaning device fights harmful
sediment build-up with a h
­ igh-­velocity spiraling
water stream – helps operating e
­ fficiency by
saving e
­ nergy, money and improving tank life
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
Warranty
• 8-Year limited tank and parts w
­ arranty*
•W
ith ProtectionPlus™ the 8-year limited tank
warranty becomes 12-year
*See Residential Warranty Certificate for ­complete
information
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
Ask about
LEED Points
Electric Tank-Type
• .95 EF
• Isolated tank design reduces ­conductive
heat loss
• Resistored stainless steel upper and lower
­heating elements to prolong anode rod and
tank life
62
DESCRIPTION
T
Y
P GAL. MODEL
E CAP. NUMBER
Features
FIRST HOUR
RATING
G.P.H.
RECOVERY
IN G.P.H. 90° F RISE
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
TANK
HEIGHT TO
HEIGHT
WATER CONN.
DIAMETER
AB
C
ENERGY INFO.
APPROX.
SHIP WT.
(LBS) ENERGY
FACTOR
Tall
30 PRO+E30 T2 RH95 EC1
48
21
47-1/2
50-3/8
19-1/4*
92
0.95
Tall
40 PRO+E40 T2 RH95 EC1
57
21
60-3/4
63-5/8
19-1/4
109
0.95
Tall
50 PRO+E50 T2 RH95 EC1
67
21
58-5/8
61-5/8
20-3/8
121
0.95
Tall
55 PRO+E55 T2 RH94 EC1
71
21
57
59-3/4
22-1/4
128
0.94
Med. 30 PRO+E30 M2 RH95 EC1
44
21
37-1/2
40-1/2
20-1/4
92
0.95
Med. 40 PRO+E40 M2 RH95 EC1
55
21
48-1/4
50-1/2
20-1/4
106
0.95
Med. 50 PRO+E50 M2 RH95 EC1
65
21
48
50-1/2
23
132
Super Sentinel optional. Add EC2 to the end of the model number to replace EC1. System Sentinel and Super Sentinel not available on single
element models, available on dual element models only. System Sentinel and Super Sentinel not available in excess of 5 kW on 208 V models.
*When Super Sentinel is added to the 30-gallon tall model, the diameter changes to 18-1/4.
Energy Factor based on D.O.E. (Department of Energy) test procedures.
• Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 4500 watt upper and lower heating elements.
• If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically­requested.
• Special Wiring Options – A limited number of special wiring options are available. Consult factory for price and availability.
• All models equipped with heat traps.
**Recovery = wattage/2.42 x temp. rise °F.
Example: 4500W
= 21 GPH
2.42 x 90°
0.95
8"
HOT
WATER
CONNECTION
COLD
WATER
CONNECTION
RELIEF VALVE
CONNECTION
C
ANODE
ROD
DIAMETER
A
B
**Recovery calculations used are based on 4500 watt elements used in non-simultaneous operation.
WATER CONNECTIONS ALL 3/4" N.P.T.
63
Professional Classic™
Efficiency
Features
• Electric junction box located above heating
­elements for easy installation
• Over-temperature protector cuts off power in
excess temperature situations
• Automatic thermostat keeps water at desired
­temperature
Plus…
Performance
•F
HR: 42 - 71 gallons, based on gallon capacity
• Recovery rate is 21 gallons at a 90 degree
Fahrenheit rise
System Sentinel
(Available on selected models)
•E
xclusive diagnostic system with ­glowing LEDs
that verify heating element operation. LEDs pin
point the exact location of functioning or ­­nonfunctioning heating elements
• EverKleen™ self cleaning device fights harmful
sediment build-up with a ­high-­velocity spiraling
water stream – helps operating e
­ fficiency by
saving ­energy, money and improving tank life
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
8"
Ask about
LEED Points
HOT
WATER
CONNECTION
C
*See Residential Warranty Certificate for ­complete
information
ANODE
ROD
DIAMETER
Warranty
• 6-Year limited tank and parts w
­ arranty*
• With ProtectionPlus™ the 6-year limited tank
warranty becomes 10-year
COLD
WATER
CONNECTION
RELIEF VALVE
CONNECTION
Electric Tank-Type
• .95 EF
• Isolated tank design reduces ­conductive
heat loss
• Resistored copper upper element and
­resistored Lifeguard™ stainless steel lower
element to prolong anode rod and tank life
A
B
Longer Life
•P
remium grade anode rod provides long-lasting
tank protection
WATER CONNECTIONS ALL 3/4" N.P.T.
64
DESCRIPTION
GAL. MODEL
TYPE CAP. NUMBER
Tall 30
Tall 40
Tall 50
Tall 55
Med. 30
Med. 40
Med. 50
Short 19.9
Short 28
Short 30
Short 36
Short 38
PROE30 T2 RH95 PROE40 T2 RH95†
PROE50 T2 RH95†
PROE55 T2 RH94†
PROE30 M2 RH95†
PROE40 M2 RH95†
PROE50 M2 RH95†
PROE20 S2 RH
PROE28 S2 RH95
PROE30 S2 RH95 B**
PROE36 S2 RH95
PROE38 S2 RH95 B**
†
Features
FIRST HOUR
RATING
G.P.H.
RECOVERY
IN G.P.H. 90° F RISE
48
57
67
71
44
55
65
–
42
42
45
45
21
21
21
21
21
21
21
21
21
21
21
21
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
TANK
HEIGHT TO
HEIGHT
WATER CONN.
DIAMETER
AB
C
47-1/2
60-3/4
58-5/8
57
37-1/2
48-1/4
48
31-1/2
30
30-1/8
31-1/2
31-1/2
50-3/8
63-5/8
61-5/8
59-3/4
40-1/2
50-1/2
50-1/2
31-1/2
31-1/8
32
33
32-5/8
19-1/4
19-1/4
20-1/4
22-1/4
20-1/4
20-1/4
23
17
23
19-3/4
24-1/4
23
APPROX.
SHIP WT.
(LBS) ENERGY INFO.
ENERGY
FACTOR
920.95
109
0.95
121
0.95
128
0.94
92
0.95
106
0.95
132
0.95
62
–
95
0.95
95
0.95
118
0.95
108
0.95
Energy Factor based on D.O.E. (Department of Energy) test procedures.
†
System Sentinel optional. Add EC1 to the end of the model number. System Sentinel not available on single element models, available on dual element models only. System Sentinel
not available in excess of 5 kW on 208 V models.
**Water heater dimensions prior to installing insulation blanket that is included with water heater
•H
eaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 4500 watt upper and lower heating elements.
• If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically­requested.
• Single element models available on special order (6000W max.). Substitute “1” for “2” in model number.
• Special Wiring Options – A limited number of special wiring options are available. Consult factory for price and availability.
• All models equipped with heat traps.
Recovery = wattage/2.42 x temp. rise °F.
Example: 4500W
= 21 GPH
2.42 x 90°
Recovery calculations used are based on 4500 watt elements used in non-simultaneous operation.
65
Professional Classic™ Point-of-Use
Efficiency
• .95 EF for 30-gallon model
•O
ver-temperature protector cuts off power in
excess temperature situations
Features
• Temperature and pressure relief valve
• Exclusive Rheemglas® tank lining resists
­corrosion and prolongs tank life
• Meets or exceeds National Appliance Energy
Conservation Act (NAECA) requirements
• These units are U.L. listed and c
­ omply with
Underwriter’s Laboratories S
­ pecifications 174
• Enhanced-flow brass drain valve on 2.5-gallon
model
• Low lead compliant
2.5-Gallon
Warranty
• Automatic thermostat keeps water at desired
temperature
•W
all bracket for easy wall mount installations
and corrosion resistant 1/4 turn drain valve
included with 2.5 gallon model
• 6-Year limited tank and parts w
­ arranty*
*See Residential Warranty Certificate for ­complete
information
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
6, 10, 15, 19.9
and 30-Gallon
Electric Tank-Type
•H
igh efficiency single resistored stainless steel
heating ­element
Plus…
66
DESCRIPTION
Features
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
HT. TO HOT
GAL.
HEIGHT
WATER OUTLET
DIAMETER
CAP.
MODEL NUMBER
AB
C
HT. TO SIDE
T&P VALVE
D
2.5
PROE2 1 RH POU
14
14
9-3/4
6
PROE6 1 RH POU
15-1/4
12-1/2
15-3/4
11-1/2
HT. TO COLD
WATER INLET
E
–
ENERGY INFO.
APPROX.
SHIP WT.
(LBS.)
–
4-1/4
ENERGY
FACTOR
22
N/A
36
N/A
10
PROE10 1 RH POU
23
20-1/2
15-3/4
19-1/2
4-1/4
46
N/A
15
PROE15 1 RH POU
24-1/4
22
17-3/4
21
4-1/2
54
N/A
19.9
30
PROE20 1 RH POU
25-1/4
22-3/4
19-3/4
21-3/4
5
69
N/A
PROE30 1 RH95 POU*
31-7/8
23-1/8
22-1/4
23
3
91
0.95
Energy Factor based on D.O.E. (Department of Energy) test procedures.
*For double element, substitute 2” suffix for 1”. Not available in 120 volt. Available with 2-wire (single phase) outlet only. (6000 watt max.).
• 2.5 gallon model: 1⁄2” N.P.T. inlet and outlet. Relief valve connection 3⁄4”.
Available with 120 or 240 volt AC single phase only, 120v (1440w) 240v (1500w)
Power cord supplied with 120 volt models only.
• 6 through 30 gallon models: 3⁄4” N.P.T. outlet, inlet, anode rod. T & P valve connections. Not available with 3 phase wiring.
Water heaters furnished standard with 120 volt AC, 2000 watt single element.
Special wiring options – a limited number of wiring options are available. Consult factory for price and availability.
CONSTRUCTION DETAILS: The cold water enters the tank a few inches from the bottom. Both hot and cold water lines may be
connected directly to the water heater without special nipples or tees. The relief valve simply screws into the opening provided.
3-1/2"
HOT WATER
CONNECTION
COLD WATER
CONNECTION
ANODE
ROD
HOT
WATER
OUTLET
RELIEF VALVE
CONNECTION
C
RELIEF VALVE
DIAMETER
A BD
A
B
C
COLD
WATER
INLET
E
WATER CONNECTIONS ALL 1/2" N.P.T.
RELIEF VALVE CONNECTIONS 3/4" N.P.T.
2-1/2 GALLON MODEL
6, 10, 15, 19.9 AND
30 GALLON MODELS
67
Professional Classic™ for Manufactured Housing
Efficiency
• .95 EF
• Isolated tank design reduces ­conductive
heat loss
• Resistored Lifeguard™ stainless steel upper
heating ­element
•F
HR: Up to 54 gallons, based on model
• Recovery rate is 17 gallons for 3500 watts and
21 gallons for 4500 watts at a 90° F rise**
Longer Life
•P
remium grade anode rod provides long-lasting
tank protection
Features
•H
igh performance and lower operating cost
•C
ompliant with H.U.D., ASHRAE 90A-80 and
NAECA requirements
•S
ingle and double element models available.
High efficiency resistored heating element in
single element models. Lifeguard™ stainless
steel element is the upper element in double
element models
• Electric junction box located above heating
elements for easy installation
Plus…
• Certified for manufactured (HUD) and m
­ odular
construction
®
­ orrosion and
• Rheemglas tank lining resists c
prolongs tank life
™
• EverKleen self cleaning device fights harmful
sediment build-up with a ­high-­velocity spiraling
water stream – helps operating e
­ fficiency by
saving ­energy, money and improving tank life
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
Warranty
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
Electric Tank-Type
Performance
•O
ver-temperature protector cuts off power in
excess temperature situations
• Automatic thermostat keeps water at desired
temperature
• 6-Year limited tank and parts w
­ arranty*
*See Residential Warranty Certificate for ­complete
information
68
DESCRIPTION
T
Y
P GAL.MODEL
E CAP.NUMBER
Tall 19.9 PROE20 1 RH MH
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
Features
FIRST HOUR
RATING G.P.H.
3500 Watts
4500 Watts
RECOVERY
IN G.P.H. 90° F RISE
3500 Watts
4500 Watts
TANK
HEIGHT TO
HEIGHT
WATER CONN.
DIAMETER
AB
C
ENERGY INFO.
APPROX.
SHIP WT.
(LBS) ENERGY
FACTOR
–
–
–
–
31-1/2
25-1/2
17-3/4
62
N/A
Tall
30 PROE30 1 RH95 MH†
25
46
17
21
47-3/4
39-1/2
19
92
0.95
Tall
30 PROE30 2 RH95 MH†
25
46
17
21
47-3/4
39-1/2
19
92
0.95
Tall
40 PROE40 1 RH95 MH†
30
50
17
21
48-1/2
40-1/8
21-1/8
106
0.95
Tall
40 PROE40 2 RH95 MH†
30
50
17
21
48-1/2
40-1/8
21-1/8
106
0.95
Tall
50 PROE50 1 RH95 MH
41
54
17
21
59
50-5/8
21-1/8
124
0.95
Tall
50 PROE50 2 RH95 MH
41
54
17
21
59
50-5/8
19-3/4
124
0.95
Energy Factor based on D.O.E. (Department of Energy) test procedures.
• If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically­requested.
•Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 3500 watt or 4500 watt heating elements.
PROE20 1 RH MH furnished with standard 120 volt AC, single phase, 2000 watt heating element.
• Special Wiring Options – A limited number of special wiring options are available. Consult factory for price and availability.
**Recovery = wattage/2.42 x temp. rise °F.
Example: 4500W
= 21 GPH
2.42 x 90°
RELIEF
VALVE
C
HOT
OUTLET
DOUBLE
ELEMENT
AVAILABLE
ON 30, 40
& 50 GAL.
ONLY
A B
ANODE
**Recovery calculations used are based on 4500 watt elements used in non-simultaneous operation.
JUNCTION
BOX
†LEED Point = 1
COLD
INLET
3"
COLD
OUTLET
WATER CONNECTIONS ALL 3/4" N.P.T.
HOT
OUTLET
69
Table Top
Table Top Features
Efficiency
• .88 EF
•W
ell insulated for reduced standby heat loss
Performance
•F
HR: 45-gallons
• Recovery rate: 21 gallons GPH at a
90 degree rise
Capacity & Dimensions
•4
0 Gallon model: 24 inch diameter:
25 inch depth and 36 inches high
Easy Installation & Service
• Table top surface is easily removed for
access to cold and hot water outlets at top
of tank, electrical connections and anode rod
­replacement
Longer Life
• Patented magnesium anode rod with r­esistor
protects the tank from rust
Plus…
• Durable direct immersion resistored heating
element
• Full-flow, brass drain valve
• Temperature and pressure relief valve
• Low lead compliant
• Standard replacement parts
Warranty
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
Electric Tank-Type
•B
aked enamel counter top is acid and heat
resistant
•F
our inch high backsplash protects interior wall
from spills and stains
• Recessed base provides comfortable standing
area while working
•C
hannel at rear accommodates piping and
­permits water heater to fit snugly against
back wall
• More hot water at a low operating cost
• 6-Year limited tank and parts w
­ arranty*
*See Residential Warranty Certificate for ­complete
information
70
DESCRIPTION
GAL.
MODEL
CAP.
NUMBER
40
88H-40D
Features
FIRST HOUR
RATING
G.P.H.
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
RECOVERY
HEIGHT TO
IN G.P.H. HEIGHT
WATER CONN.
DIAMETER
DEPTH
90° F RISE
AB
C
D
ENERGY INFO.
APPROX.
SHIP WT.
(LBS) ENERGY
FACTOR
452136332425156
0.88
Energy Factor based on D.O.E. (Department of Energy) test procedures.
• Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 4500 watt upper and lower heating elements.
• If heating elements of different wattages than those shown are demanded by zone requirements, they must be s
­ pecifically requested.
• Special Wiring Options – A limited number of special wiring options are available. Consult factory for price and availability.
4"
C
ANODE
ROD
RELIEF
VALVE
4"
4"
COLD
A
HOT
D
C
71
Tankless Electric
Features
Efficiency
•M
odulating heat exchanger improves energy
efficiency
• No standby heat loss aids in energy
consumption
• No venting needed - eliminates greenhouse
gases
Easy Installation
•C
omplete install without removing
the cover
•E
asy water connections using
1/2-inch compression fittings
•L
ightweight
Space Savings
• No T&P valve required
• Compact size - fits
almost anywhere
Applications
• Homes
• Apartments
• Condos
• Hospitals
• Rest rooms
• Restaurants
• Offices
• Laboratories
• Anywhere hot water is needed
Warranty
• 10-Year limited heat exchanger and
1-year limited parts w
­ arranty.*
*See Residential Warranty Certificate for ­complete
information
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
RTE 3 and RTE 7
• Ideal for fast, continuous hot water at a
single point-of-use faucet or other fixture
• RTE 3 (3kW/120V) requires a d
­ edicated
30 AMP breaker
• RTE 7 (7kW/240V) requires a d
­ edicated
30 AMP breaker
RTE 3
RTE 7
RTE 9
RTE 13
Tankless Electric
•C
ontinuous hot water on demand
• Industry leading low-flow activation
•E
xternal temperature control
•L
EDs indicate active element and standby
mode
•1
/2-Inch water connections
• Rugged brass/copper heat exchanger
•P
re-wired 2-foot power supply cord(s) included
• Low lead compliant
RTE 18
RTE 27
72
RTE 9 and RTE 13
• Ideal for fast, continuous hot water at a
­lavatory or sink
• RTE 9 (9kW/240V) requires a d
­ edicated
40 AMP breaker
• RTE 13 (13kW/240V) requires a d
­ edicated
60 AMP breaker
RTE 18 and RTE 27
• Designed for fast, continuous hot water in
a bathroom addition/renovation or single
shower
• RTE 18 (18kW/240V) requires two
­dedicated 40 AMP breakers
• RTE 27 (27kW/240V) requires two
­dedicated 60 AMP breakers
All come with an on-unit temperature control
with LED lights
Application
Flow Rate in GPM
at 60 PSI
Typical Shower
Electrical Specifications
2.0 GPM
Model
Kw
VOLTS
REcommendedMAX POWER
BREAKER Size
(AMP)
AWG
WIRE
Typical Bath Tub Faucet
2.5 GPM
RTE 3
3
120
30
29
10
Bathroom Vanity Sink Faucet
1.0 GPM
RTE 7
7
240
30
29
10
Kitchen Sink Faucet
1.5 GPM
RTE 9
9
240
40
38
8
Washer
2.0 GPM
RTE 13
13
240
60
54
6
RTE 18
18
240
(2) 40
75
(2) 8
RTE 27
27
240
(2) 60
112
(2) 6
Temperature Rise and GPM FLOW
MinimumMax.
Temperature Rise Chart (F°)
activation Flow
and flow rates by model
Modelflow rate
Rate
Number (GPM) (GPM)20°30°40°50°60°
70°80°90°
100°
RTE 3
0.4
1.5
1.09
0.73
0.55
0.44
RTE 7
0.4
2.5
2.50
1.59
1.20
0.96
0.80 0.68
0.60
0.53 0.48
RTE 9
0.4
3
3.00
2.05
1.54
1.23
1.02 0.88
0.77
0.68 0.61
RTE 13
0.4
4
4.00
2.96
2.22
1.78
1.48 1.27
1.11
0.99 0.89
RTE 18
0.4
5
5.00
4.10
3.07
2.46
2.05 1.76
1.54
1.37 1.23
RTE 27
0.4
5
5.00
5.00
4.61
3.69
3.07 2.63
2.31
2.05 1.84
–
–
–
–
–
Dimensions (inches/pounds)
Model/SKU
HEIGHTwidth DEPTHweight
RTE 3 / 444250
10-1/4
5-3/8
3-1/4
6
RTE 7 / 452526
10-1/4
5-3/8
3-1/4
6
RTE 9 / 452604
10
7-1/4
3-1/4
8
RTE 13 / 452637
10
7-1/4
3-1/4
8
RTE 18 / 452888
10-1/2
11-1/4
3-1/4
12
RTE 27 / 452893
10-1/2
11-1/4
3-1/4
12
• Plumbing connections: 1/2 NPT • Minimum flow rate: 1/2 gal. min
73
SolPak™ Active System with Electric Backup
System
• Closed loop system – glycol design
• Single and double collector systems
•S
ystem includes – Solaraide HE tank, ­collectors
and pump station
Heat Exchanger Tank
• OG-100 certified by SRCC
• Available in three sizes
• Durable low iron tempered glass – i­mproves
efficiency and heat transfer
• Integral mounting channel for easy i­nstallation
• Stainless steel fasteners
• Type-M copper riser tubes
• Black paint absorber coating
Pump Station
• Pre-engineered assembly of q
­ uality
­components in a neat, compact ­insulated
enclosure
• Simple, labor saving, attractive solution for
closed loop glycol solar systems
• Includes cast iron three speed pump, advanced
differential controller and b
­ alancing valve and
flow meter
Warranty
• 6-Year limited tank, 10-year limited collector
and 6-year limited pump station w
­ arranty.*
*See Residential and SolPak Warranty
Certificate for ­complete information
Solar
• 65, 80 and 120-Gallon capacities
• 4500 Watts
• Provides at least 40 gallons of stored hot water
•D
ouble wall, high efficiency solar heat
exchanger includes copper tubing wrapped
around the tank and secured within the jacket
for positive leak protection
•C
ollector feed and return fittings ­conveniently
located on front of tank for easy installation
• Cold water inlet brings cold water to tank
bottom to prevent mixing with heated water
­ orrosion and
• Rheemglas® tank lining resists c
prolongs tank life
• T&P Valve included
• Low lead compliant
• Automatic temperature control and over heat
protection
Collector
System Certifications
• OG-300 certification by SRCC
74
SYSTEM INFORMATION
STORAGE
CAPACITY
(US GAL)
SYSTEM
MODEL
NUMBER
COLLECTOR INFORMATION
SOLAR
NUMBER OFAREA
DRY
ENERGY COLLECTOR ABSORBER
WIDTH
LENGTH
DEPTH
SQ. FT.
FACTOR*
PANELS
COATING
(INCHES) (INCHES) (INCHES) (GROSS)
WATER HEATER INFO.
FLUID
DESIGN
MAX
MAX.
APPROX.
WEIGHT CAPACITY FLOW RATE FLOW RATE OPERATING HEIGHT DIAMETER WEIGHT ELEMENT
(LBS)
(US GAL)
(GPM)
(GPM)
PRESSURE (INCHES) (INCHES)
(LBS) WATTAGE
65
RS65-24BP
1.4
1
Black Paint
36-1/8
98-1/4
3-1/4
24.61
80
.78
0.62
12
160
59
21
170
4500 W
65
RS65-32BP
1.7
1
Black Paint
48-1/8
98-1/4
3-1/4
32.19
106
1.0
0.83
12
160
59
21
170
4500 W
65
RS65-40BP
1.9
1
Black Paint
48-1/8
122-1/4
3-1/4
40.81
191
1.2
1.04
12
160
59
21
170
4500 W
80
RS80-40BP
2.4
1
Black Paint
48-1/8
122-1/4
3-1/4
40.81
141
1.2
1.04
12
160
58-3/4
24-1/2
222
4500 W
80
RS80-48BP
2.6
2
Black Paint
36-1/8
98-1/4
3-1/4
24.61
80
.78
0.62
12
160
58-3/4
24-1/2
222
4500 W
120
RS120-64BP
3.2
2
Black Paint
48-1/8
98-1/4
3-1/4
32.79
106
1.0
0.83
12
160
62
28-1/4
380
4500 W
* As rated by the Solar Rating & Certification Corporation (SRCC)
Get a Federal Tax Credit up to 30% of the cost of equipment and installation with a Solar Water Heater.
Applies to existing or new residential construction. Tax credit a
­ vailable through Dec. 2016.
See your Tax Advisor for details.
2
HOT
PROPYLENE
GLYCOL
COOL PROPYLENE GLYCOL
HEATED POTABLE WATER
1 Heat Exchanger Tank
2 Collectors
3 Pump Station
3
4
1
4 Thermal Expansion Tank
POTABLE WATER SUPPLY
SOLARAIDE
HE
WATER HEATER
(NOT INCLUDED)
75
SolPak™ Active System with Gas Backup
System
• Closed loop system – glycol design
• Fast recovery for high demand s­ ituations
•P
erfect replacement for current gas water
heating system
•S
ystem includes – Solaraide™ HE gas ­storage
tank, collectors and pump s­ tation
Heat Exchanger Tank
• OG-100 certified by SRCC
• Available in two sizes
• Durable low iron tempered glass – i­mproves
efficiency and heat transfer
• Integral mounting channel for easy i­nstallation
• Stainless steel fasteners
• Type-M copper riser tubes
• Black paint absorber coating
System Certifications
• OG-300 certification by SRCC
Pump Station
• Pre-engineered assembly of q
­ uality
­components in a neat, compact ­insulated
enclosure
• Simple, labor saving, attractive solution for
closed loop glycol solar systems
• Includes cast iron three speed pump, advanced
differential controller and b
­ alancing valve and
flow meter
Warranty
• 6-Year limited tank, 10-year limited collector
and 6-year limited pump station w
­ arranty.*
*See Residential and SolPak Warranty
Certificate for ­complete information
Solar
• 75-Gallon capacity
• 75.1 Btu/h – natural gas
•D
ouble wall, high efficiency solar heat
exchanger
• Low NOx burner design
• Gas backup heating source
­ orrosion and
• Rheemglas® tank lining resists c
prolongs tank life
• T&P Valve included
• Low lead compliant
• Automatic temperature control and over heat
protection
Collector
76
SYSTEM INFORMATION
COLLECTOR INFORMATION
WATER HEATER INFO.
STORAGE
SYSTEMSOLAR
NUMBER OF
AREA
DRY
FLUID
DESIGN
MAX
MAX.
APPROX.
CAPACITY MODEL
ENERGY COLLECTOR ABSORBER
WIDTH
LENGTH
DEPTH
SQ. FT. WEIGHT CAPACITY FLOW RATE FLOW RATE OPERATING HEIGHT DIAMETER WEIGHTBTU/H
(US GAL) NUMBER
FACTOR
PANELS
COATING
(INCHES) (INCHES) (INCHES) (GROSS)
(LBS)
(US GAL)
(GPM)
(GPM)
PRESSURE (INCHES) (INCHES)
(LBS)
INPUT
75
RSG75-48BP
–
2
Black Paint
36-1/8
98-1/4
3-1/4
24.61
80
.78
0.62
12
150
60
26-1/4
340
75.1
75
RSG75-40BP
–
1
Black Paint
48-1/8
122-1/4
3-1/4
40.81
141
1.20
1.04
12
160
60
26-1/4
340
75.1
Get a Federal Tax Credit up to 30% of the cost of equipment and installation with a Solar Water Heater. Applies to existing or new residential construction. Tax credit a
­ vailable through Dec. 2016.
See your Tax Advisor for details.
2
HOT
PROPYLENE
GLYCOL
COOL PROPYLENE GLYCOL
HEATED POTABLE WATER
1 Heat Exchanger Tank
2 Collectors
3
3 Pump Station
4
1
4 Thermal Expansion Tank
POTABLE WATER SUPPLY
SOLARAIDE
HE
WATER HEATER
(NOT INCLUDED)
77
Solar Collectors
Features
Low Iron Tempered Glass
Low-Binder Fiberglass Insulation
Rigid Foam Insulation
Secondary Silicon Glazing Seal
Black Chrome or
Moderately Selective
Black Paint Absorber Coating
Copper Absorter Plate
Solar
•O
G-100 certified by SRCC
•D
urable low iron tempered glass – improves
efficiency and heat transfer
• Integral mounting channel for easy installation
• Stainless steel fasteners
•S
uitable for open and closed loop systems
• Type-M copper riser tubes
•C
opper absorber plate – allows collector to be
used in glycol forced circulation, drain-back, or
open loop systems
•C
an be mounted horizontally or ­vertically
•B
P and BC Series – available in three sizes
Warranty
•1
0-Year limited collector ­warranty*
*See Residential Warranty Certificate for c
­ omplete
information
Integral Mounting Channel
Aluminum Backsheet
Vent Plug
78
MODEL
ABSORBER
WIDTH
LENGTH
DEPTH
AREA
NUMBER
COATING
(INCHES)
(INCHES)
(INCHES)
SQ. FT.
DRY
WEIGHT
FLUID
(LBS.)
CAPACITY
DESIGN
FLOW RATE
(GPM)
MAX
FLOW RATE
(GPM)
MAX
OPERATING
PRESSURE
RS24-BP
Black Paint
36-1/8
98-1/4
3-1/4
24.61
80
0.78
0.62
12
160
RS32-BP
Black Paint
48-1/8
98-1/4
3-1/4
32.79
106
1
0.83
12
160
RS40-BP
Black Paint
48-1/8
122-1/4
3-1/4
40.81
141
1.2
1.04
12
160
THERMAL PERFORMANCE RATINGS* BP SERIES (Btu / ft2 / Day)
THERMAL PERFORMANCE RATINGS* BC SERIES (Btu / ft2 / Day)
Category (Ti-Ta)CLEAR DAY
MILDLY CLOUDY day
CLOUDY day
Ti = inlet fluid temp.
2000
1500
1000
Ta = ambient air temp.Btu / ft2 / DayBtu / ft2 / DayBtu / ft2 / Day
Category (Ti-Ta)CLEAR DAY
MILDLY CLOUDY day
CLOUDY day
Ti = inlet fluid temp.
2000
1500
1000
Ta = ambient air temp.Btu / ft2 / DayBtu / ft2 / DayBtu / ft2 / Day
A (-9°F)
1,284
971
659
A (-9°F)
1332
1,005
680
B (9°F)
1,169
854
542
B (9°F)
1,218
890
565
C (36°F)
984
677
372
C (36°F)
1,040
720
402
D (90°F)
619
343
89
D (90°F)
699
405
127
E ( 144°F)
280
62
–
E ( 144°F)
390
137
–
Thermal performance is obtained by multiplying the collector output for the appropriate application and insulation level by the total gross collector area.
*Collector ratings are derived from the Solar Rating & Certification Corp (SRCC) Document RM-1 and Standard OG-100
79
Solaraide™ HE Tanks
Features & Benefits
•D
ouble wall heat exchanger includes copper
tubing wrapped around the tank and secured
within the jacket for positive leak protection
• Two well insulated models to choose from…
a storage tank or a high ­efficiency 4500 Watt
backup electric water heater
• Electric backup model provides at least
40-­gallons of stored hot water
•C
ollector feed and return fittings conveniently
located on front of tank for easy installation
• A special 1/2” NPT opening is provided for
installation of a probe type” thermostat
•D
urable brass drain valve for easy maintenance
• Cold water inlet brings cold water to tank
­bottom to prevent mixing with heated water
­ orrosion and
• Rheemglas® tank lining resists c
prolongs tank life
• Anode rod equalizes aggressive action for
prolonged tank life
• Temperature and pressure relief valve included
• Electric backup model has automatic
­temperature control and over heat protection
• Low lead compliant
Warranty
• 6-Year limited tank and parts w
­ arranty*
*See Residential Warranty Certificate for ­complete
information
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
Copper Heat Exchanger Coil
Type L Copper 5/8" I.D.
Solaraide HE
Coil Capacity
Tank CapacityGallons
Length of Tubing
Around Tank (Ft)
65 Gallons
2.2
120
80 Gallons
2.2
120
120 Gallons
2.6
143
PRESSURE DROP THROUGH COIL (Feet of H20)
Flow Rate
Head Loss (Feet)
65 & 80-Gallon
120-Gallon
1 GPM
1.3
1.6
2 GPM
4.8
5.7
3 GPM
10.0
12.0
Solar
Easy Installation and ­Maintenance
Tank Design & Construction
80
DESCRIPTION
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
ENERGY INFO.
T
Y P GAL.MODEL
E CAP.NUMBER
ElementAPPROX
WATTAGE
HEIGHT
DIAMETER
SHIP WT.
APPROX.
UPPER
AB
(LBS) R-FACTOR
Tall
65 82V65HE
4500 W*
59
21
170
R-17.3
Tall
80 81V80HE-1
4500 W*
58-3/4
24-1/2
222
R-17.3
Tall
80 81V80HE-T
Storage only
58-3/4
24-1/2
222
R-17.3
Tall 120 82V120HE-1
4500 W*
62
28-1/4
380
R-17.3
Tall 120 82V120HE-T
Storage only
62
28-1/4
380
R-17.3
*Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring and 4500 watt
heating element. If heating elements of different wattages than those shown are demanded by
zone requirements, they must be specifically requested.
To prevent corrosion, proper pH levels in transfer fluid must be maintained.
Solaraide models meet all current state requirements for solar storage tanks.
The tanks are Rheemglas lined and are designed to operate up to 150 PSI.
WATER CONNECTION NIPPLES
ALL 3/4" N.P.T.
B
8"
COLD
INLET
HOT
OUTLET
RELIEF
COLLECTOR
RETURN
HOT VALVE COLD
A
SENSOR
PROBE
PORT
COLLECTOR
FEED
7"
WATER CIRCULATOR
(REQUIRED FOR NONGRAVITY SYSTEMS)
LAR R
SO ECTO OR
F
R
LL
CO ABLE ATE E
W
IT
SU ABLE PYLENION
T
T
PO D PROSOLU
AN COL
L
GY
81
Solaraide™ HE with Gas Assist
Features & Benefits
•D
ouble wall, high efficiency solar heat
­exchanger
•F
ast recovery, 75-gallon capacity for high
demand applications
•F
or use in residential closed loop solar water
heating systems
Easy Installation and ­Maintenance
Guardian System™ & Sensor
• Exclusive air/fuel shut-off device
• Maintenance free – no filter to clean
• Disables the heater in the presence of
flammable vapor accumulation
Warranty
Maximum pressure = 150 PSI
Solaraide HE
Coil Capacity
Tank CapacityGallons
75 Gallons
• 6-Year limited tank and parts w
­ arranty*
*See Residential Warranty Certificate for ­complete
information
Tank Design & Construction
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
Length of Tubing
Around Tank (Ft)
2.2
120
PRESSURE DROP THROUGH COIL (Feet of H20)
Flow Rate
Head Loss (Feet)
75-Gallon
1 GPM
2 GPM
4.8
3 GPM
10.0
1.3
Solar
•F
ront solar connections for easy installation
•D
urable brass drain valve for easy maintenance
•L
ow NOx burner design
•C
old water inlet brings cold water to tank
­bottom to prevent mixing with heated water
­ orrosion and
• Rheemglas® tank lining resists c
prolongs tank life
• Anode rod equalizes aggressive action for
prolonged tank life
• Temperature and pressure relief valve included
• Automatic temperature control and over heat
protection
• Low lead compliant
Copper Heat Exchanger Coil
Type L Copper 5/8" I.D.
82
DESCRIPTION
FEATURES
T
GAS INPUT
Y
IN THOUS.
P GAL. MODEL BTU/H
E CAP.NUMBER
NAT.
Tall 75
RSG75
75.1
RECOVERY
IN G.P.H.
90°
RISE
75.8
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
FIRST HOUR
DELIVERY
HT. TO
TANK
G.P.H.
VENT
HT.
DIAM.
NAT.
AB
C
75.8
64
60
HT. TO
GAS
VENT CONN.
SIZE
D
E
26-1/4
32
4
WATER
CONN.
CNTR.
F
11
HT. TO
SIDE
WATER
T&P
CONN.
G
H
53-1/4
1
HT. TO
HEAT EXCHANGER
INLET
HT. TO
HEAT
EXCHANGER
OUTLET
SHIP.
WT.
(LBS)
31
12
340
To prevent corrosion, proper pH levels in transfer fluid must be maintained. Solaraide models meet all current state requirements for solar storage tanks.
F
E
RELIEF VALVE
A
H
HOT
WATER
CONNECTION
B
FROM
COLLECTOR
H
C
G
THERMOSTAT
COLD
WATER
CONNECTION
TO
COLLECTOR
30.930
D
THERMISTOR
FITTING
12.055
DRAIN VALVE
83
Solaraide™ Storage Tanks
Features & Benefits
•C
onnection ports on the top, right and left side
fit more installations and reduce SKUs
• Two well insulated models to choose from…
a storage tank or a high ­efficiency 4500 Watt
backup electric water heater
• Electric backup model provides at least
40-gallons of stored hot water
Easy Installation and ­Maintenance
• Cold water inlet brings cold water to tank
­bottom to prevent mixing with heated water
• Uses the potable water within the tank for
circulation through the solar system
­ orrosion and
• Rheemglas® tank lining resists c
prolongs tank life
• Anode rod equalizes aggressive action for
prolonged tank life
• Temperature and pressure relief valve included
• Electric backup model has automatic
­temperature control and over heat protection
• Low lead compliant
Warranty
Solar
•C
ollector feed and return fittings conveniently
located on front of tank for easy installation
• A special 1/2” NPT opening is provided for
installation of a probe type” thermostat
•D
urable brass drain valve for easy maintenance
Tank Design & Construction
• 6-Year limited tank and parts w
­ arranty*
*See Residential Warranty Certificate for ­complete
information
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
84
DESCRIPTION
T
Y P GAL.MODEL
E CAP.NUMBER
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
Element
WATTAGE
HEIGHT
DIAMETER
UPPER
AB
HEIGHT TO
CONNECTOR FEED
C
ENERGY INFO.
HEIGHT TO
COLLECTOR RETURN
D
APPROX
SHIP WT.
(LBS) APPROX.
R-FACTOR
Tall 80 81vr80U-1
4500 W*
58-3/4
24-1/2
3
38-1/4
192
R-17.3
Tall 80 81vr80U-t
Storage Only
58-3/4
24-1/2
3
38-1/4
192
R-17.3
Tall 120 81vr120U-1
4500 W*
62
28-1/4
3-3/4
38-1/2
336
R-16.7
Tall 120 81vr120U-T
Storage Only
62
28-1/4
3-3/4
38-1/2
336
R-16.7
*Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring and 4500 watt heating element.
If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested.
Solaraide models meet all current requirements for solar storage tanks.
The tanks are Rheemglas lined and are designed to operate up to 150 PSI.
B
HOT
OUTLET
COLD
INLET
COLLECTOR
RETURN
A
COLLECTOR FEED
ANODE ROD
SENSOR WIRE
HOT OUTLET
D
COLLECTOR
FEED
C
COLD INLET
SIDE T&P OPENING
W
WATER CIRCULATOR
(REQUIRED FOR NON-GRAVITY SYSTEMS)
COLLECTOR
RETURN
8"
LAR R
SO ECTO OR
F
R
LL
CO ABLE ATE
W
IT
E
SU ABLE D
UR
T AN RESS
PO
P
IN
MA
R
E
AT
8"
WATER CONNECTION NIPPLES
ALL 3/4" N.P.T.
85
Marathon® Thermal Storage Tank
Designed for Alternative ­Energy
­Applications
Designed for Easy installation
•S
pecifically designed for installation as a
­thermal storage tank
•B
ackup electrical element provides 40 ­gallons
or more of heated water
• Large water connections for lower ­
pressure drop
• Lightweight
• Water port fittings located at front of s­ torage
tank for convenient access
• Full port, full flow brass drain valve for fast
draining
• Factory installed temperature and pressure relief
valve and vacuum relief valve
Built to Last!
Plus…
• Thermally fused element provides p
­ rotection
against dry-firing”
• Bowl shaped bottom allows for c
­ omplete
sediment removal
• Recessed drain valve is out of the way of
brooms and scrubbers
• Low lead compliant
Solar
•S
eamless, blow-molded, ­polybutene tank –
impervious to rust and ­corrosion
• Titanium sheath elements for superior
­resistance to lime build-up
• Multiple
layers of filament wound fiberglass give
the tank unmatched strength
• Tough molded polyethylene outer shell resists
dents and scratches
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
Warranty
• Lifetime limited tank and 6-year limited parts
warranty
*See Residential Warranty Certificate for ­complete
information
86
DESCRIPTION
Features
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
T
Y
TANK
HEIGHT TO
HEIGHT TO
HEIGHT TO
P GAL. MODEL
ELEMENT
HEIGHT
WATER CONN.
DIAMETER
LOWER PORT
UPPER PORT
E CAP.NUMBER
wattageAB
C
D
E
APPROX.
SHIP WT.
(LBS)
Tall
50 MTS50200
N/A
62-3/4
66-3/4
23-1/2
13-1/2
46
100
Tall
85 MTS85200
N/A
66-1/4
70-1/4
28-1/4
14-1/2
49-1/2
134
Tall 105 MTS105200
N/A
66-3/4
70-3/4
30-1/4
15
50
152
Tall
4500
66-1/4
70-1/4
28-1/4
14-1/2
N/A
134
85 MTS85245
Tall 105 MTS105245
4500
66-3/4
70-3/4
30-1/4
15
N/A
152
Tall
4500
66-1/4
70-1/4
28-1/4
14-1/2
26-1/2
134
4500
66-3/4
70-3/4
30-1/4
15
27-1/2
152
85 MTS85345
Tall 105 MTS105345
Canadian certified models have different model numbers than U.S. models. Add a C” before the model number (e.g., CMTS85245) when ordering.
Canadian certified models are not available on thermal storage tanks without backup elements (e.g., MTS50200, MTS85200, MTS105200)
•Storage tanks furnished with elements are standard 240 volt AC.
•Maximum test pressure: 300 PSI, maximum working pressure: 150 PSI, maximum water temperature: 180° F
87
ProtectionPlus™
ProtectionPlus™ is a 4-year
­warranty extension kit to be
used for new Rheem water
heater ­installations
Warranty Extension
• High quality magnesium anode rod with plastic
lined nipple (hot side)
• Plastic lined nipple (cold side)
• Brass 3/4” to 1” adaptor
• Warranty certificate with instructions
• ProtectionPlus™ label to be placed on water
heater
Advantages
• Provides up to 135% additional anodic
­protection
• With just two water heaters, you have the
option of selling four warranty periods
• Effectively have four water heaters in little more
space than two
ProtectionPlus™
6
8
Year Limited Tank
Warranty Becomes
Year Limited Tank
Warranty Becomes
10
12
Part Number: SP20079
(Sold only in 6 package quantity)
Miscellaneous
•6
-Year limited tank warranty becomes 10-year
• 8-Year limited tank warranty becomes 12-year
­ odels except
• For use on all Rheem residential m
Manufactured Housing, Marathon, Point-of-Use,
Hybrid Heat Pump, Table Top, Condensing Gas
Models, Tankless or Thermal Expansion Tanks
The Kit Contains
88
EverKleen™ System
EverKleen™ self-cleaning water
heating system fights harmful
­sediment build-up with a high
­velocity spiraling water stream
­ islodge this
The EverKleen™ system helps to d
s­ ediment by channeling water through a specially
developed inlet tube. This tube c
­ reates a high-­
velocity spiralling water stream which strikes the
bottom of the water heater tank with sediment
busting force.
Miscellaneous
Sediment build-up in a water heater creates­
­layers of non-conducting m
­ aterial between
the water and the energy that heats the water.
This causes a reduction of heat transfer which
­increases tank bottom t­emperatures and
­decreases water t­emperatures. When this occurs,
the results are decreased water heater efficiency
and decreased tank life.
The spiraling effect
also creates better
mixing throughout
the water heater tank
which reduces the
­effects of stacking.
Stacking o
­ ccurs
when f­requent small
draws of water c
­ reate
different t­emperatures
throughout the tank
­resulting in increased
peak ­temperatures at
the top of the tank. The
­EverKleen™ system
greatly reduces peak
­temperatures, thus
increases first hour
­deliverability.
Advantages
Water Heating System
• Fights sediment build-up
• Helps preserve operating e
­ fficiency
• Helps improve tank life
•P
rovides increased d
­ eliverability
89
Lifeguard™ Electric Element
Accessories
Low watt density design delivers full watt-rated heating power to
a larger surface area, eliminating high heat concentrations and
prolonging element life.*
Catch Pan
*See Residential Warranty Certificate for complete information.
Catch pan must conform to local codes
High-grade magnesium oxide packing moves
the heat quickly to the element’s surface,
protecting the nichrome wire filament and
boosting efficiency.
INCOLOY 840 stainless steel sheath,
resists water chemical corrosion and
burn-out even in air or sediment for long
element life, long life performance.
®
Wall Mounting Kit
Steel screw-in
head provides solid
­construction and
ease of maintenance.
For Point-of-Use Electric Water Heaters
This wall mounting kit for point-of-use electric water
heater installations provides an easy way to mount the unit
off the floor, out of the way for more usable floor space in
a small area. It’s been designed for use with 6, 10, 15, and
20 gallon models (AS-36111) and all walls with 16” stud
cen­ters. All necessary parts are included in this easy to
install, t­ime-and-money saving kit.
Miscellaneous
High density nichrome wire electric heating filament;
best grade A, 80/20 nichrome wire made…for top
performance and long-life operation.
Available in 5 sizes to help protect any installation area
from possible water damage. Each 2” deep drain pan is
­manufactured of aluminum and fitted with a 1” drain outlet. Provides that extra level of protection assurance” that
many homeowners and apartment dwellers are looking
for. Available in 18”, 20”, 22”, 24”, and 261⁄2” d
­ iameters.
Our specially designed, tapered side wall allows for
one-inside-the-other stacking and minimal storage area.
Available with side drain outlet.
90
Thermal Expansion Tanks
Features
A
A
• The safest and most cost e
­ ffective way to
eliminate ­problems associated with thermal
expansion in closed loop systems
• Protects water heater and p
­ lumbing fixtures
from p
­ remature f­ailure
• Low lead compliant
B
Warranty
B
• 5-Year limited tank and parts w
­ arranty*
*See Residential Warranty Certificate for ­complete
information
MODELS:
RRT-5
RRT-12
MODEL:
RRT-25
(RRT-5,
RRT-12
Liner only)
Standard
Total
Maximum
System
Factory
Model
Volume
Acceptance Operating
Working
Diameter Height Ship. Connection Pre-Charge
Diaphragm
Number
(Gallons)
(Gals.)
Temperature
Pressure (PSIG)
(A)
(B)
Wt.
(Brass)
(2.8 kg/cm2)Material
Liner
Material
RRT-5
2.0
.9
200°F (93°C)
150 (10.5kg/cm )
8”
12-5/8”
5
3/4” NPTM
40 PSIG
Butyl Rubber
Polypropylene
RRT-12
4.4
3.2
200°F (93°C)
150 (10.5kg/cm2)
11”
15”
9
3/4” NPTM
40 PSIG
Butyl Rubber
Polypropylene
RRT-25
10.3
10.3
200°F (93°C)
150 (10.5kg/cm2)
15-3/8”
19-1/4”
23
1” NPTF
40 PSIG
Butyl Rubber
Polypropylene
2
Maximum Working Pressure: 150 PSI. All Models listed by NSF 61; Maximum Allowable Working Temperature: 200°F; Standard Factory Precharge: 40 PSIG
Thermal Expansion Tanks
•T
he Therm-X-Guard is designed to p
­ rovide
control of maximum pressures at a level below
the relief valve setting. Therefore, the relief valve
does not open and spillage is eliminated. It
also provides additional space in the system to
accommodate the increased volume of water
created by thermal expansion, returning it to the
system upon demand.
• Suitable with water heaters up to 120 ­gallon
capacity and s­ upply ­pressure to 80 P.S.I.
•E
asy to install – and are ­maintenance free
91
Marathon® – Limited Lifetime Warranty
Non-metallic Tank Features
Efficiency for 40 and 50-gallon models
• .95 EF
•W
ell insulated for reduced standby heat loss
•P
ipe wrap energy saving kit included to achieve
maximum energy savings
Performance for 40 and 50-gallon models
•F
HR: 52 - 61 gallons, depending on model
• Recovery: 21 GPH at a 90° F rise**
Easy Installation & Service
• Marathon’s lightweight tank is easier to
­maneuver and position
• Bowl shaped tank bottom allows complete
sediment draining
• Water tight grommets keep out over-head
moisture and condensation
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
Plus…
• Thermally fused upper element provides
­protection against dry-firing
• Titanium lower ­element for superior resistance
to lime build-up
• Full-flow, brass drain valve
• Temperature and pressure relief valve
• Low lead compliant
• Standard replacement parts
Marathon
•S
eamless, blow-molded, ­polybutene tank –
impervious to rust and ­corrosion
•M
ultiple layers of filament wound fiberglass give
the tank unmatched strength
•P
olyurethane insulation helps reduce energy
consumption
• Recessed drain valve is out of the way brooms
and scrubbers
• High temperature polysulfone dip tube
• Tough molded polyethylene outer shell resists
dents, scratches, and salt air
• All plastic tank eliminates the need for an
anode rod
Warranty
• Marathon and Marathon Point-of-Use: Lifetime
limited warranty on tank and 6-years on parts*
• Point-of-use Light duty commercial use: 10-year
limited tank warranty and 1-year on parts*
*See Warranty Certificate for c
­ omplete information
LEED Point = 1
†
92
DESCRIPTION
Features
T
Y
P GAL. MODEL
E CAP. NUMBER
FIRST HOUR
RATING
G.P.H.
RECOVERY
IN G.P.H. 90° F RISE
Tall 40 MR40245†
Tall 50 MR50245†
Short 50 MSR50245†
52
61
54
21
21
21
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
TANK
HEIGHT TO
HEIGHT
WATER CONN.
DIAMETER
AB
C
61-1/2
62-3/4
43-1/4
65-1/2
66-3/4
47-1/4
ENERGY INFO.
APPROX.
SHIP WT.
(LBS) ENERGY
FACTOR
90
100
95
0.95
0.95
0.95
21-3/4
23-1/2
28-1/4
Point-of-Use Models
DESCRIPTION
Features
T
Y
P GAL. MODEL
ELEMENT
E CAP. NUMBER
WATTAGE
VOLTAGE
POU 15 MR15120
POU 19.9 MR20120
POU 19.9 MR20230
2000
2000
3000
120
120
240
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
TANK
HEIGHT TO
HEIGHT
WATER CONN.
DIAMETER
AB
C
31-3/4
30-1/2
30-1/2
35-3/4
34-1/2
34-1/2
ENERGY
FACTOR
58
61
61
N/A
N/A
N/A
21-3/4
23-1/2
23-1/2
Energy Factor based on D.O.E. (Department of Energy) test procedures.
Canadian models have different model numbers than U.S. models. Add a C” before the model number (e.g., CMR85245) when ordering.
Water heaters furnished with standard 240 or 120 volt AC, single phase non-simultaneous wiring. If heating elements of different wattages than those shown
are demanded, they must be specifically requested. For height to top of T&P and heat traps add 3-1/2” to the height to water connection.
Maximum test pressure: 300 PSI. Maximum working pressure: 150 PSI.
**Recovery calculations used are based on 4500 watt elements used in non-simultaneous operation.
C
C
**Recovery = wattage/2.42 x temp. rise °F.
Example: 4500W
= 21 GPH
2.42 x 90°
ENERGY INFO.
APPROX.
SHIP WT.
(LBS) A
A
B
3/4" NPT
B
LEED Point = 1
†
5-3/4"
5-3/4"
93
Marathon® Heavy Duty – Limited Lifetime Warranty
Non-metallic Tank Features
Efficiency
•W
ell insulated for reduced standby heat loss
•P
ipe wrap energy saving kit included to achieve
maximum energy savings
Performance
• Recovery Capacity: 18.2 gallons per hour
(delivers approximately 78 g
­ allons of hot water
in the first hour for 75-gallon models, 91 gallons
for 85-gallon models and 104 gallons for
105-gallon models)**
• Thermostat capable of delivering water
temperature up to 180° F for high temperature
applications
Easy Installation & Service
• Marathon’s lightweight tank is easier to
­maneuver and position
• Bowl shaped tank bottom allows complete
sediment draining
• Water tight grommets keep out over-head
moisture and condensation
Plus…
• Thermally fused upper element provides
­protection against dry-firing
• Titanium upper and lower ­elements for superior
resistance to lime build-up
• Full-flow, brass drain valve
• Temperature and pressure relief valve and
factory installed vacuum relief valve
• Low lead compliant
• Standard replacement parts
Marathon
•S
eamless, blow-molded, ­polybutene tank –
impervious to rust and ­corrosion
•M
ultiple layers of filament wound fiberglass give
the tank unmatched strength
•P
olyurethane insulation helps reduce energy
consumption
• Recessed drain valve is out of the way of
brooms and scrubbers
• High temperature polysulfone dip tube
• Tough molded polyethylene outer shell resists
dents, scratches, and salt air
Warranty
• See Warranty Certificate for c
­ omplete
­information
94
DESCRIPTION
T
Y
P GAL. MODEL
E CAP. NUMBER
Tall 75 MHD75245
Tall 85 MHD85245
Tall 105 MHD105245
Features
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
RECOVERY
IN G.P.H. 100° F RISE**
FIRST HOUR
DELiIVERY
G.P.H.
18.2
18.2
18.2
78
91
104
TANK
HEIGHT TO
HEIGHT
WATER CONN.
DIAMETER
AB
C
58-5/8
66-1/4
66-3/4
62-5/8
70-1/4
70-3/4
APPROX.
SHIP WT.
(LBS) 28-1/4
28-1/4
30-1/4
122
134
152
**Recovery Capacity is based upon a 100° F water temperature rise and calculated per ANSI Z21.10.3 standards. First hour hot water delivery is based upon 77° water temperature rise.
• Water heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring; available in 3800 and 4500 watt double element configuration (85-gallon 3000 watt).
• For height to top of heat traps add 3-1/2" to the height to water connection.
• Maximum test pressure: 300 PSI; Maximum working pressure: 150 PSI
C
• 180° F Max. temperature setting
A
B
5-3/4"
95
Spiderfire® Ultra High Efficiency (GHE Series)
Features
information
• Up to 97% thermal efficiency
• 80 and 100-Gallon capacities
• LCD diagnostic ­control system
• 130,000-399,900 Btu/h inputs
• Sealed combustion system
• Patented heat exchanger eliminates hot spots
for better efficiency and longer life
• Ultra low NOx burner
• Faster, less costly venting with -2", -3", -4" or -6"
diameter PVC plastic vent pipe
• NEW! Industry best venting up to 170 feet for
models less than 200,000 Btu/h; Up to 130 feet
for models over 200,000 Btu/h
• Built-in side riser saves installation time
• Installs as power vent or power direct vent
• Certified up to 8,999 feet above sea level
• Low lead compliant
• Natural and LP models
GAS INLET
EXHAUST
AIR INTAKE
HOT OUT
REAR
T&P
HOT OUT
FRONT
C
COLD IN
FRONT
F
H
G E
DELIVERY
HAND HOLE
CLEANOUT
DRAIN
VALVE
COLD IN
REAR
D
B
LEFT SIDE
FRONT
EliteXpress
48 Hour
RIGHT SIDE
REAR
Gas Tank-Type
A
INTAKE
Warranty
• 3-Year limited tank, ­upgradable to 5-years
and 1-year limited parts warranty*
With
Optional Kit
EXHAUST
*See Commercial Warranty Certificate for c
­ omplete
TEMP
SENSOR
31°
T&P
31°
42°
41°
TOP VIEW
ASME
DRAIN VALVE
(OPTIONAL)
Low Lead
Compliant
96
recovery capacitieS
MODEL
NUMBER
GAL.
CAP.
DIMENSIONAL INFORMATION (All dimensions shown in inches)
INPUT (BTU/H) THERMAL TEMP. RISE – G.P.H.
NAT. & LP
EFFIC.
40° F 100° F 140° F
AB
C
D
E
F
G
H
VENT
WATER CONNECTSAPPROX.
INLET
OUTLET SHIP. WT. (LBS)*
H GHE80ES-130(A)
80
130,000
97%
382
153
109
69-5/8
26-1/4†
66-1/8 12-3/4
64-5/8
64-13/16 62-13/16
66-5/8
2, 3, 4
2” NPT
2” NPT
725
H GHE80ES-150(A)
80
150,000
94%
427
171
122
69-5/8
26-1/4†
66-1/8 12-3/4
64-5/8
64-13/16 62-13/16
66-5/8
2, 3, 4
2” NPT
2” NPT
725
H GHE80ES-200(A)
80
199,000
94%
569
228
163
69-5/8
26-1/4†
66-1/8 12-3/4
64-5/8
64-13/16 62-13/16
66-5/8
2, 3, 4
2” NPT
2” NPT
745
H GHE80ES-250(A)
80
250,000
95%
720
288
206
69-5/8
26-1/4†
66-1/8 12-3/4
64-5/8
64-13/16 62-13/16
66-5/8
3, 4
2” NPT
2” NPT
745
H GHE80ES-300(A)
80
300,000
94%
855
342
244
69-5/8
26-1/4†
66-1/8 12-3/4
64-5/8
64-13/16 62-13/16
66-5/8
3, 4, 6
2” NPT
2” NPT
745
H GHE100ES-130(A) 100
130,000
95%
374
150
107
78-3/4
26-1/4†
66
12-3/4
73-3/4
73-5/8
72
66-7/16
2, 3, 4
2” NPT
2” NPT
765
H GHE100ES-160(A) 100
160,000
95%
461
184
132
78-3/4
26-1/4†
66
12-3/4
73-3/4
73-5/8
72
66-7/16
2, 3, 4
2” NPT
2” NPT
765
H GHE100ES-200(A) 100
199,000
95%
573
229
164
78-3/4
26-1/4†
66
12-3/4
73-3/4
73-5/8
72
66-7/16
2, 3, 4
2” NPT
2” NPT
765
H GHE100ES-250(A) 100
250,000
95%
713
285
204
78-3/4
26-1/4†
66
12-3/4
73-3/4
73-5/8
72
66-7/16
3, 4
2” NPT
2” NPT
795
H GHE100ES-300(A) 100
300,000
94%
845
338
242
78-3/4
26-1/4†
66
12-3/4
73-3/4
73-5/8
72
66-7/16
3, 4, 6
2” NPT
2” NPT
795
H GHE100ES-350(A) 100
350,000
94%
997
399
285
78-3/4
26-1/4†
66
12-3/4
73-3/4
73-5/8
72
66-7/16
3, 4, 6
2” NPT
2” NPT
800
H GHE100ES-400(A) 100
399,900
94%
1139 456
326
78-3/4
26-1/4†
66
12-3/4
73-3/4
73-5/8
72
66-7/16
3, 4, 6
2” NPT
2” NPT
800
H Energy Star compliant model.
*Weights listed are for non-ASME. Add 35 lbs. for ASME models.
130,000 - 199,000 Btu/h models are certified to be installed with 2” venting.
All models require a 120V power source.
See use and care manual for venting details.
†
Overall width is 27-5/16” due to exhaust cover.
®
0” clearance to combustibles on sides; 6” top clearance for models 130-300; 8” top clearance for 350 and 400 model.
Models with inputs of 130,000 Btu/h thru 199,000 Btu/h are ­certified to vent with 2” schedule 40 pvc, cpvc or abs
pipe. (For Canadian i­nstallations, please use ULC-S636 PVC and CPVC pipe.)
97
Super Duty Ultra High Efficiency (GHE Series)
Warranty
Gas-Fired
• 3-Year limited tank and 1-year limited parts
warranty*
ASME
*See Commercial Warranty Certificate for c
­ omplete
information
(OPTIONAL)
Low Lead
Compliant
Gas Tank-Type
COMBUSTION
AIR INTAKE
4” PVC
GAS CONN.
HOT
T&P VALVE
A
HOT/COLD
G
HOT
HOT/COLD
GAS CONN.
T&P
F
C
VAL
V
E
90°
COLD
AIN
• 93% Thermal efficiency
• 500,000 Btu/h
• 119 and 125-Gallon capacities
• 180° F Maximum temperature setting
• Sealed combustion system
• Ultra low NOx burner
• All models vent with standard 4” or 6” diameter
PVC plastic pipe
• Can be installed with Power Vent or Power Direct
Vent configurations
• LCD user interface to monitor key functions and
components
• Helical-fin three stage heat exchanger to
­optimize heat transfer and efficiency
• Magnesium anode rods
• Multiple water connections
• Factory installed brass drain valve
•C
ertified up to 2,000 feet above sea level;
7,800 feet for high altitude models
• Low lead compliant
• Natural and LP models
DR
Features
30°
68°
90°
COLD
D
DRAIN
E
B
TOP VIEW
EXHAUST VENT
CONNECTION/
CONDENSATE
ASSEMBLY
4” PVC
FRONT VIEW
98
SIDE VIEW
recovery capacitieS
DIMENSIONAL INFORMATION (All dimensions shown in inches)
INPUT (BTU/H) THERMAL TEMP. RISE – G.P.H.
NAT. & LP
EFFIC.
40° F 100° F 140° F
AB
C
D
CONNECTIONSAPPROX.
SHIP. WT. (LBS)*
F
G
VENT COLD HOT
GAS
MODEL
NUMBER
GAL.
CAP.
GHE119-500
119
500,000
93%
1409 564
403
78.50
32.00
62.78
11.43
9.43
61.43
74.00
4
2
2
1-1/2
1,200
GHE125-500A
125
500,000
93%
1409 564
403
78.50
32.00
62.78
11.43
9.43
61.43
74.00
4
2
2
1-1/2
1,200
E
*Weights listed are for non-ASME. Add 35 lbs. for ASME models.
Minimum And Maximum Vent and Air Intake Pipe Lengths (4" Pipe)
MODEL
NUMBER
FUEL
TYPE
VENT
ARRANGEMENT
MIN. EQUIVALENT PIPE LENGTH (PER PIPE RUN)
AIR INTAKE1 (FT.)
VENT2 (FT.)
GHE119-500
NAT. or LP
DIRECT VENT
20
20
GHE125-500A
NAT. or LP
POWER VENT
0
20
MAX. EQUIVALENT PIPE LENGTH (PER PIPE RUN)
AIR INTAKE1 (FT.)
VENT2 (FT.)
50†50†
0
100
Equivalent length is measured between the 4" pipe connection on the water heater and the required 90° elbow termination fitting.
2
Equivalent length is measured after the point of connection to the condensate assembly and includes the termination fitting (it used).
†
Shown as a balance system. Vent length may exceed air intake length if total combined length does not exceed 100 ft.
Intake length cannot exceed exhaust length.
1
Minimum
And Maximum Vent and Air Intake Pipe Lengths (6" Pipe)
MODEL
NUMBER
FUEL
TYPE
VENT
ARRANGEMENT
MIN. EQUIVALENT PIPE LENGTH (PER PIPE RUN)
AIR INTAKE3 (FT.)
VENT4 (FT.)
GHE119-500
NAT. or LP
DIRECT VENT
50
50
GHE125-500A
NAT. or LP
POWER VENT
0
50
MAX. EQUIVALENT PIPE LENGTH (PER PIPE RUN)
AIR INTAKE3 (FT.)
VENT4 (FT.)
Equivalent length is measured between the 4" pipe connection on the water heater and the required 90° elbow termination fitting.
4
Equivalent length is measured after the point of connection to the condensate assembly and includes the termination fitting (it used).
†
Shown as a balance system. Vent length may exceed air intake length if total combined length does not exceed 240 ft.
Intake length cannot exceed exhaust length.
120†120†
0
240
3
99
AdvantagePlus™ Ultra High Efficiency (HE Series)
Features
• Optional concentric vent kits are available for
side or vertical v­ enting
• Optional aluminum outside vent t­ermination kit
• Low water cut-off on all models
• Low lead compliant
• Natural and LP models
• Design reduces NOx emissions to less than
14 ng/J. (SCAQMD Rule 1146.2 compliant)
• Zero clearance to combustibles
• Certified up to 10,000 feet above sea level
• CSA/ASME rated temperature and pressure
relief valve
B
Hot Out
Warranty
• 3-Year limited tank and 1-year limited parts
warranty
*See Commercial Warranty Certificate for c
­ omplete
information
AD
Gas Inlet
Gas Tank-Type
•9
5% Thermal efficiency
• 100,000-199,000 Btu/h
• 55, 80 and 119-Gallon capacities
• Temperature setting from 70° to 160° F
•1
80° F Maximum temperature setting available
on HE55-160 and HE55-199 models with
booster kit
•2
” Non-CFC, polyurethane foam i­nsulation
reduces standby heat loss
• Self-diagnostic electronic ­control with HSI
ignition control and d
­ iagnostics
• The heart of the system is a coil heat
­exchanger, which is c
­ onstructed of corrosion
resistant, high efficiency, 90/10 cupronickel
• Stainless steel tank construction requires no
anode rods. Durable plastic exterior shell
• Removable front cover allows for easy access
to equipment (24 inches of service clearance is
­recommended)
• No chimney required – vents through standard
PVC, CPVC and ABS pipes, with a vent run up
to 85 feet total for exhaust and intake
• Install as a two pipe power direct vent when air
quality or negative air ­pressure are issues
Electrical
Connection
E
F
Cold In
3.75”
C
Condensate Connection
100
MODEL
NUMBER
recovery capacitieS
GAL.
CAP.
DIMENSIONAL INFORMATION (All dimensions shown in inches)
INPUT (BTU/H) THERMAL TEMP. RISE – G.P.H.
NAT. & LP
EFFIC.
40° F 100° F 140° F
AB
C
D
E
F
VENT
WATER CONNECTSAPPROX.
INLET
OUTLET SHIP. WT. (LBS)
H HE55-100*
55
100,000
95%
288
115
N/A
52
23-1/2
32
45
5
25-1/4
2*
1
1
175
H HE55-130*
55
130,000
95%
374
150
N/A
52
23-1/2
32
45
5
25-1/4
2*
1
1
175
H HE80-130*
80
130,000
95%
374
150
N/A
72
23-1/2
32
65
5
25-1/4
2*
1-1/2
1-1/2
235
H HE119-130*
119
130,000
95%
374
150
N/A
73
27
36
66-3/4
6-3/4
28-7/8
2*
1-1/2
1-1/2
405
H HE55-160
55
160,000
95%
461
184
132
52
23-1/2
32
45
5
25-1/4
3
1
1
175
H HE80-160
80
160,000
95%
461
184
N/A
72
23-1/2
32
65
5
25-1/4
3
1-1/2
1-1/2
235
H HE119-160
119
160,000
95%
461
184
N/A
73
27
36
66-3/4
6-3/4
28-7/8
3
1-1/2
1-1/2
405
H HE55-199
55
199,000
95%
573
229
164
52
23-1/2
32
45
5
25-1/4
3
1
1
175
H HE80-199
80
199,000
95%
573
229
N/A
72
23-1/2
32
65
5
25-1/4
3
1-1/2
1-1/2
235
H HE119-199
119
199,000
95%
573
229
N/A
73
27
36
66-3/4
6-3/4
28-7/8
3
1-1/2
1-1/2
405
H Energy Star® compliant model.
The recovery rate is based on recovery efficiencies obtained in a UL certified laboratory. These models have been tested according to ANSI Z21.10.3 test procedures and exceed the thermal efficiency and standby loss
requirements of ASHRAE (part of the Federally mandated Energy Policy Act - EPACT). These models also exceed the energy ­efficiency codes of all states including the California Energy Commission (CEC). All models
are North Carolina Code compliant.
Use HEC prefix for Canadian models.
0” Clearance to combustibles on all AdvantagePlus units, however, a 24” control panel service clearance is recommended.
*Models with inputs of 100,000 Btu/h and 130,000 Btu/h are ­certified to vent with 2” schedule 40 pvc or cpvc pipe. (For Canadian i­nstallations, please use ULC-S636 PVC and CPVC pipe.)
The HE55-160 and HE55-199 Booster ­models are the only models equipped with a 180°F thermostat. Models with 180°F thermostats come standard with the Booster Installation Kit
which includes all n
­ ecessary components for an approved installation. Booster Installation Kit includes: Nibco Tee – 1” x 1” x 1/2” (2 pieces), Female Adapter – 1” (2 pieces),
Dial Thermometer (2 pieces), Expansion Tank – 4-1/2 gallon, Grundfos 3 Speed Pump with Check Valve, Nibco 1.2” x 12” Fitting Air Chamber, Vacuum Relief Valve, Pressure Gauge – 0-200 psi,
Nibco Tee 712R – 1” x 1” x 3/4” (2 pieces), Nibco Tee 714RR – 1” x 1/2” x 1”, Nibco Tee – 1” x 1/2” x 1” Copper, Reducing Coupling, Pressure Reducing Valve, Nibco Male Adapter – 1”
101
Universal™ Heavy Duty (G Series)
Features
Warranty
• 3-Year limited tank, ­upgradable to 5-years
and 1-year limited parts warranty*
(On Selected
Models)
*See Commercial Warranty Certificate for c
­ omplete
information
OUTLET
TOP
(With
Optional Kit)
H
E
INLET
TOP
EliteXpress
48 Hour
DELIVERY
OUTLET
REAR SIDE
OUTLET
FRONT SIDE
T&P
C
INLET
FRONT SIDE
F B A
SYSTEM
SENTINEL
G
INLET
REAR SIDE
Gas Tank-Type
• Meet or exceed ASHRAE minimum of 80%
• 98,000-399,900 Btu/h
• 35 to 100-Gallon capacities
• 180° F Maximum temperature setting
• Top-front-rear inlet/outlet water connections
• Short floor to vent heights, small jacket
­diameters
• Exclusive System Sentinel LED diagnostic
system
• Patented multi-flue design
• Stainless steel burners with raised port design
slide out for quick i­nspection and maintenance
• Low profile automatic flue damper
• Full-port, full-flow brass drain valve
• Direct spark-to-pilot ignition system
• Patented anode rods for long
tank life
• Certified up to 5,000 feet above sea level for
natural gas, 2,000 feet for LP; with altitude
certification kit, up to 8,000 feet
• Low lead compliant
• Natural and LP models
D
7"
(178mm)
102
recovery capacitieS
MODEL
NUMBER
GAL.
CAP.
50
75
82
76
35
76
91
100
72
100
100
72
85
100
65
65
85
100
G50-98
G75-125
G82-156
G76-180
G37-200
G76-200
G91-200
G100-200(A)
G72-250(A)
G100-250(A)
G100-270(A)
G72-300(A)
G85-300(A)
G100-310(A)
G65-360(A)
G65-400(A)
G85-400(A)
G100-400(A)
DIMENSIONAL INFORMATION (All dimensions shown in inches)
INPUT (BTU/H) THERMAL TEMP. RISE – G.P.H.
NAT. & LP
EFFIC.
40° F 100° F 140° F
AB
C
D
98,000
125,000
156,000
180,000
199,900
199,900
199,900
199,900
250,000
250,000
270,000
300,000
300,000
310,000
360,000
399,900
399,900
399,900
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
238
303
378
436
485
485
485
485
606
606
654
727
727
752
873
969
969
969
95
121
151
175
194
194
194
194
242
242
262
291
291
301
349
388
388
388
68
87
108
125
138
138
138
138
173
173
187
208
208
215
249
277
277
277
62-3/4
65-1/2
68-13/16
68-13/16
49-1/4
68-13/16
76-5/16
73-1/16
71-1/16
73-1/4
73-7/8
71
78-7/16
75
70-11/16
70-11/16
78-13/16
76
57-1/8
61
64
64
43-3/8
64
71-13/16
66-1/8
64-1/2
66-1/8
66-1/8
64-1/2
72-5/16
68-1/2
64-1/2
64-1/2
72-5/16
68-1/2
22-1/2
26-1/4
26-1/4
26-1/4
26-1/4
26-1/4
26-1/4
30-1/4
26-1/4
30-1/4
30-1/4
26-1/4
26-1/4
30-1/4
26-1/4
26-1/4
26-1/4
30-1/4
22-5/8
25
25
25
25
25
30-5/8
23-1/4
25
23-1/4
23-1/4
25
30-5/8
32-1/4
25
25
30-5/8
32-1/4
E
5
5
6
6
6
6
6
6
6
8
8
8
8
7
8
8
10
8
F
G
H
50-1/2
56
58-5/8
58-5/8
37-5/8
58-5/8
66-3/8
57-1/2
58-5/8
57-1/2
57-1/2
58-5/8
66-3/8
61-3/4
58-5/8
58-5/8
66-3/8
61-3/4
1/2
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1*
15
20
20
20
20
20
20
23
20
23
23
20
20
23
n/a
n/a
20
23
WATER CONNECTS
APPROX. SHIP. WT. (LBS)
TOP
FRONT
REAR
STD.
1
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
n/a
n/a
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
1-1/2
2
2
1-1/2
1-1/2
2
1-1/2
1-1/2
1-1/2
2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
1-1/2
2
2
1-1/2
1-1/2
2
1-1/2
1-1/2
1-1/2
2
270n/a
480
n/a
490
n/a
540
n/a
405
n/a
540n/a
600
n/a
780
835
590
630
795
835
805
845
590
630
640
680
770
810
640
680
640
680
640
680
770
810
Recovery ratings are based on thermal efficiencies obtained in a CSA certified laboratory. Thermal Efficiency in accordance with ANSI Z21.10.3 labeling requirements.
(A) Indicates available ASME Model. *3/4” for L.P. models. Increase height 3-5/8” for NSF models. All models require a 120V power source.
These models have been tested according to ANSI test procedures, and exceed the thermal efficiency and standby loss requirements of ASHRAE (Part of the Federally mandated Energy
Policy Act (EPact)). Also exceeds energy efficiency codes of all states including California Energy Commission (CEC). All models are North Carolina Code compliant.
ASME
103
Universal™ Low NOx Heavy Duty (GN Series)
Features
Low NOx Burner
• Power assist burner design ­incorporates stainless steel ­multi-port burner tubes for long term
low NOx performance,l ess than 40 ng/J
• Sight glass allows for burner ­observation
• Blower guard provides protection against
­potential post-­installation ­damage
• Low NOx models are certified up to 2,000 feet;
high altitude ­certification for models GN76-200,
GN91-200 and GN100-270 is 5,000 feet;
model GN100-200(A) is 8,000 feet
Warranty
• 3-Year limited tank, ­upgradable to 5-years
and 1-year limited parts warranty*
(On Selected
Models)
OUTLET
TOP
H
E
INLET
TOP
EliteXpress
48 Hour
DELIVERY
OUTLET
REAR SIDE
OUTLET
FRONT SIDE
T&P
C
INLET
FRONT SIDE
*See Commercial Warranty Certificate for c
­ omplete
information
F B A
SYSTEM
SENTINEL
G
INLET
REAR SIDE
Gas Tank-Type
• 80% Thermal efficiency
• 125,000-399,900 Btu/h
• 35 to 100-Gallon capacities
• 180° F Maximum temperature setting
• Top-front-rear inlet/outlet water connections
• Short floor to vent heights, small jacket
­diameters
• Exclusive System Sentinel LED diagnostic
system
• Patented multi-flue design with proprietary steel
formulation and two coats of porcelain enamel
for a ­superior heat exchanger design
• Low profile automatic flue damper
• Full-port, full-flow brass drain valve
• Direct spark-to-pilot ignition system
• Patented anode rods for long tank life
• Low lead compliant
• Natural gas models
D
7"
(178mm)
104
MODEL
NUMBER
recovery capacitieS
GAL.
CAP.
DIMENSIONAL INFORMATION (All dimensions shown in inches)
INPUT (BTU/H) THERMAL TEMP. RISE – G.P.H.
NAT.
EFFIC.
40° F 100° F 140° F
AB
C
D
E
F
G
H
WATER CONNECTS
TOP
FRONT
APPROX. SHIP. WT. (LBS)
STD.
ASME
GN75-125
75
125,000
80%
303
121
87
65-1/2
61
26-1/4
25
5
56
3/4
20
1-1/2 1-1/2 1-1/2
480
N/A
GN82-156
82
156,000
80%
378
151
108
68-13/16
64
26-1/4
25
6
58-5/8
3/4
20
1-1/2 1-1/2 1-1/2
490
N/A
GN37-200
35
199,900
80%
485
194
138
49-1/4
43-3/8
26-1/4
25
6
37-5/8
3/4
20
1-1/2 1-1/2 1-1/2
405
N/A
GN76-200
76
199,900
80%
485
194
138
68-13/16
64
26-1/4
25
6
58-5/8
3/4
20
1-1/2 1-1/2 1-1/2
540
N/A
GN91-200
91
199,900
80%
485
194
138
76-5/16
71-13/16
26-1/4
30-5/8
6
66-3/8
3/4
20
1-1/2 1-1/2 1-1/2
600
N/A
GN100-200(A)
100
199,900
80%
485
194
138
73-1/16
66-1/8
30-1/4
23-1/4
6
57-1/2
3/4
23
1-1/2
780
835
GN72-250(A)
72
250,000
80%
606
242
173
71-1/16
64-1/2
26-1/4
25
6
58-5/8
3/4
20
1-1/2 1-1/2 1-1/2
590
630
GN100-250(A)
100
250,000
80%
606
242
173
73-1/4
66-1/8
30-1/4
23-1/4
6
57-1/2
3/4
23
1-1/2
2
2
795
835
GN100-270(A)
100
270,000
80%
655
262
187
73-7/8
66-1/8
30-1/4
23-1/4
6
57-1/2
3/4
23
1-1/2
2
2
805
845
GN65-360(A)
65
360,000
80%
873
349
249
70-11/16
64-1/2
26-1/4
25
8
58-5/8
3/4
N/A
N/A
640
680
GN100-400(A)
100
399,900
80%
969
388
277
76
68-1/2
30-1/4
32-1/4
8
61-3/4
1
23
1-1/2
770
810
2
REAR
2
1-1/2 1-1/2
2
2
Recovery ratings are based on thermal efficiencies obtained in a CSA certified laboratory.
(A) Indicates available ASME model.
All models require a 120V /1.5 Amp power source.
105
Universal™ Ultra Low NOx Heavy Duty (GNU Series)
Features
Ultra Low NOx Burner
• Power assist burner design ­incorporates stainless steel multi-port burner tubes for long term
ultra low NOx performance, less than
14 ng/J
• Sight glass allows for burner ­observation
• Entire design is r­emovable and it is highly
resistant to the effects of negative air p
­ ressure
­common in modern commercial ­buildings
• Ultra low NOx base rail p
­ rovides for better
handling when moving and positioning unit
• GNU100-200(A) models are certified up to
5,200 feet above sea level. All other models are
certified up to 2,000 feet
(On Selected
Models)
INLET
TOP
DELIVERY
T&P
C
• 3-Year limited tank, ­upgradable to 5-years
and 1-year limited parts warranty*
EliteXpress
48 Hour
OUTLET
FRONT SIDE
Warranty
*See Commercial Warranty Certificate for c
­ omplete
information
H
E
OUTLET
TOP
F B A
INLET
FRONT SIDE
Gas Tank-Type
• 80-82% Thermal efficiency
• 125,000-399,900 Btu/h
• 35 to 100-Gallon capacities
• 180° F Maximum temperature setting
• Top-front-rear inlet/outlet water connections
• Short floor to vent heights, small jacket
­diameters
• Exclusive System Sentinel LED diagnostic
system
• Patented multi-flue design with proprietary steel
formulation and two coats of porcelain enamel
for a ­superior heat exchanger design
• Low profile automatic flue damper
• Full-port, full-flow brass drain valve
• Direct spark-to-pilot ignition system
• Patented anode rods for long tank life
• Low lead compliant
• Natural gas models
SYSTEM
SENTINEL
G
D
7"
(178mm)
106
MODEL
NUMBER
recovery capacitieS
GAL.
CAP.
DIMENSIONAL INFORMATION (All dimensions shown in inches)
INPUT (BTU/H) THERMAL TEMP. RISE – G.P.H.
NAT.
EFFIC.
40° F 100° F 140° F
AB
C
D
E
F
G
H
WATER CONNECTS
TOP
FRONT
APPROX. SHIP. WT. (LBS)
STD.
ASME
GNU75-125
75
125,000
80%
303
121
87
65-1/2
61
26-1/4
25
5
56
3/4
20
1-1/2 1-1/2 1-1/2
480
N/A
GNU82-156
82
156,000
80%
378
151
108
68-13/16
64
26-1/4
25
6
58-5/8
3/4
20
1-1/2 1-1/2 1-1/2
490
N/A
GNU37-200
35
199,900
82%
485
194
138
49-1/4
43-3/8
26-1/4
25
6
37-5/8
3/4
20
1-1/2 1-1/2 1-1/2
405
N/A
GNU76-200
76
199,900
80%
485
194
138
68-13/16
64
26-1/4
25
6
58-5/8
3/4
20
1-1/2 1-1/2 1-1/2
540
N/A
GNU91-200
91
199,900
82%
485
194
138
76-5/16
71-13/16
26-1/4
30-5/8
6
66-3/8
3/4
20
1-1/2 1-1/2 1-1/2
600
N/A
GNU100-200(A)
100
199,900
82%
485
194
138
73-1/16
66-1/8
30-1/4
23-1/4
6
57-1/2
3/4
23
1-1/2
780
835
GNU72-250(A)
72
250,000
80%
606
242
173
71-1/16
64-1/2
26-1/4
25
6
58-5/8
3/4
20
1-1/2 1-1/2 1-1/2
590
630
GNU100-250(A)
100
250,000
82%
606
242
173
73-1/4
66-1/8
30-1/4
23-1/4
6
57-1/2
3/4
23
1-1/2
2
2
795
835
GNU100-270(A)
100
270,000
82%
655
262
187
73-7/8
66-1/8
30-1/4
23-1/4
6
57-1/2
3/4
23
1-1/2
2
2
805
845
GNU65-360(A)
65
360,000
80%
873
349
249
70-11/16
64-1/2
26-1/4
25
8
58-5/8
3/4
N/A
N/A
640
680
GNU100-400(A)
100
399,900
80%
969
388
277
76
68-1/2
30-1/4
32-1/4
8
61-3/4
1
23
1-1/2
770
810
2
REAR
2
1-1/2 1-1/2
2
2
Recovery ratings are based on thermal efficiencies obtained in a CSA certified laboratory.
(A) Indicates available ASME model.
All models require a 120V /1.5 Amp power source.
107
Universal™ Induced Draft Heavy Duty (GD Series)
Features
Factory Installed Draft I­nducer
•P
rovides an induced draft allowing higher BTUs
to be vented through 6-inch vent
6-Inch Category 1 Appliance
• Allows for easy upgrade or retrofit of existing
applications
(On Selected
Models)
Warranty
• 3-Year limited tank, ­upgradable to 5-years and
1-year limited parts warranty*
*See Commercial Warranty Certificate for c
­ omplete
information
OUTLET
TOP
OUTLET
REAR SIDE
(With
Optional Kit)
H
E
OUTLET
FRONT SIDE
INLET
TOP
T&P
C
INLET
FRONT SIDE
F B A
SYSTEM
SENTINEL
G
INLET
REAR SIDE
Gas Tank-Type
• 80% Thermal efficiency
• 250,000, 270,000, 310,000 and 360,000 Btu/h
• 100-Gallon capacity
• 180° F Maximum temperature setting
• Top-front-rear inlet/outlet water connections
• Short floor to vent heights, small jacket
­diameters
• Exclusive ­System Sentinel LED d
­ iagnostic
system
• Patented multi-flue design with proprietary steel
formulation and two coats of ­porcelain enamel
for a ­superior heat exchanger design
• Full-port, full-flow brass drain valve
• Direct spark-to-pilot ignition system
• Patented anode rods for long tank life
• CSA/ASME rated temperature and pressure
relief valve
• Low lead compliant
• Natural and LP models
D
7"
(178mm)
108
recovery capacitieS
DIMENSIONAL INFORMATION (All dimensions shown in inches)
INPUT (BTU/H) THERMAL TEMP. RISE – G.P.H.
NAT. & LP
EFFIC.
40° F 100° F 140° F
AB
C
D
MODEL
NUMBER
GAL.
CAP.
GD100-250(A)
100
250,000
80%
606
242
173
73-1/2
66-3/4
30-1/4
23-1/4
6
57-1/2
3/4
GD100-270(A)
100
270,000
80%
665
262
187
73-1/2
66-3/4
30-1/4
23-1/4
6
57-1/2
GD100-310(A)
100
310,000
80%
752
301
215
73-1/2
66-3/4
30-1/4
23-1/4
6
GD100-360(A)
100
360,000
80%
873
349
249
73-1/2
66-3/4
30-1/4
23-1/4
6
E
F
G
H
WATER CONNECTS
APPROX. SHIP. WT. (LBS)
TOP
FRONT
REAR
STD.
ASME
23
1-1/2
2
2
795
835
3/4
23
1-1/2
2
2
795
835
57-1/2
3/4
23
1-1/2
2
2
795
835
57-1/2
3/4
23
1-1/2
2
2
795
835
Recovery ratings are based on thermal efficiencies obtained in a CSA certified laboratory. These models have been tested according to ANSI Z21.10.3 test procedures, and exceed the thermal
efficiency and standby loss requirements of ASHRAE (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy efficiency codes of all states.
(A) Indicates available ASME model.
All models require a 120V /3 Amp power source.
109
Xtreme™ Heavy Duty (GX Series)
Features
Warranty
• 3-Year limited tank, ­upgradable to 5-years
and 1-year limited parts warranty*
(On Selected
Models)
*See Commercial Warranty Certificate for c
­ omplete
information
C
E
EliteXpress
48 Hour
DELIVERY
OUTLET
FRONT SIDE
T&P
F BA
INLET
FRONT SIDE
Gas Tank-Type
• 80% Thermal efficiency
• 500,000-715,000 Btu/h
• 90-Gallon capacity
• 180° F Maximum temperature setting
• Exclusive System Sentinel LED diagnostic
system with glowing LED lights verifies system
operation sequence by sequence
• Patented multi-flue design with proprietary steel
formulation and two coats of porcelain enamel
for a ­superior heat exchanger design
• Low profile automatic flue damper
• Five premix burners mounted into a metal face
plate and sealed with a Viton ­gasket. Patented
quick release manifold for easier service
• Direct spark-to-pilot ignition system
• Precision round premix burners formed from
chromium stainless steel
• Full-port, full-flow brass drain valve
• Patented magnesium anode rods for long
tank life
• Standard natural and LP models are certified
up to 2,000 feet above sea level; 8,000 feet for
high altitude m
­ odels
• Low lead compliant
• Natural and LP models
SYSTEM
SENTINEL
G
D
110
MODEL
NUMBER
recovery capacitieS
GAL.
CAP.
DIMENSIONAL INFORMATION (All dimensions shown in inches)
INPUT (BTU/H) THERMAL TEMP. RISE – G.P.H.
NAT. & LP
EFFIC.
40° F 100° F 140° F
AB
C
D
E
F
G
WATER CONNECTS
FRONT
REAR
APPROX. SHIP. WT. (LBS)
STD.
ASME
GX90-550(A)
90
550,000 NAT
80%
1333 533
381
74.5
68
30
25
10
59
1
2
2
905
945
GX90-640(A)
90
640,000 NAT
80%
1551 621
443
74.5
68
30
25
10
59
1
2
2
905
945
GX90-715(A)
90
715,000 NAT
80%
1733 693
495
74.5
68
30
25
10
59
1
2
2
905
945
GX90-500(A) LP
90
500,000 LP
80%
1212 485
346
74.5
68
30
25
10
59
1
2
2
905
945
GX90-600(A) LP
90
600,000 LP
80%
1455 582
416
74.5
68
30
25
10
59
1
2
2
905
945
GX90-680(A) LP
90
680,000 LP
80%
1649 659
471
74.5
68
30
25
10
59
1
2
2
905
945
Recovery ratings are based on thermal efficiencies obtained in a CSA certified laboratory. These models have been tested according to ANSI Z21.10.3 test procedures, and exceed the thermal
efficiency and standby loss requirements of ASHRAE (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy efficiency codes of all states.
(A) Indicates available ASME model.
All models require a 120V power source.
111
VentMaster™ Heavy Duty Power Direct Vent (GP Series)
Features
• Low lead compliant
• Natural and LP models
Gas Control System
(On Selected
Models)
• Fully a
­ djustable thermostat from 100° F to
180° F
• 24 Volt combination gas valve includes
main gas pressure regulation and an on-off
manual valve
EliteXpress
48 Hour
DELIVERY
Gas Tank-Type
• Meets or exceeds a minimum of 80% thermal
efficiency (non-­condensing)
• 199,900 and 250,000 Btu/h
• 100-Gallon capacity
• 180° F Maximum temperature setting
• Exclusive ­System Sentinel LED d
­ iagnostic
system
• Patented multi-flue design with ­proprietary steel
formulation and two coats of ­porcelain enamel
•1
20 Volt integral automatic b
­ lower assists
quietly discharges c
­ ombustion gases
• Installs easier with less costly 3” or 4” Schedule
40 PVC pipe; no masonry or metal vent
­chimney is required
•B
ase rail design provides better handling when
moving unit
•F
ull-port, full-flow brass drain valve
•D
irect spark-to-pilot ignition system
•H
and-hole cleanout for easy ­removal of
­sediment deposits
•C
SA/ASME rated temperature and pressure
relief valve
•S
tandard models certified to 2,000 feet above
sea level; high altitude models certified to 8,000
feet above sea level
Warranty
• 3-Year limited tank, ­upgradable to 5-years and
1-year limited parts warranty*
Rear dimension, add 4"
clearance for intake
E
*See Commercial Warranty Certificate for c
­ omplete
information
C
B
F
A
D
112
recovery capacitieS
DIMENSIONAL INFORMATION (All dimensions shown in inches)
INPUT (BTU/H) THERMAL TEMP. RISE – G.P.H.
NAT. & LP
EFFIC.
40° F 100° F 140° F
AB
C
D
MODEL
NUMBER
GAL.
CAP.
GP100-200
100
199,900
80%
485
194
138
81-3/4
68-1/4
30-1/4
GP100-250(A)
100
250,000
80%
606
242
173
81-3/4
68-1/4
30-1/4
WATER CONNECTSAPPROX.
E
F
Gas
Valve
INLET
OUTLET
SHIP. WT. (LBS)
24-3/4
3
59
3/4
2
2
860
24-3/4
4
59
3/4
2
2
860
Recovery ratings are based on thermal efficiencies obtained in a CSA certified laboratory. These models have been tested according to ANSI Z21.10.3 test procedures, and exceed the thermal
efficiency and standby loss requirements of ASHRAE (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy efficiency codes of all states.
(A) Indicates available ASME model.
113
Hot Water Supply Heaters Heavy Duty (GBC Series)
Features
Reliable Heat Exchanger Design
• Copper heat exchanger
•S
ingle bank, straight-through ­design
•F
loating return ­header is immune to thermal
shock
Energy Saving Pump C
­ ontrol
• Allows the operator to set the desired time for
the pump to run after the water heater shuts off
• Water heater pump is p
­ rogrammed to continue
running for an o
­ ptimum period of time in orde to
­absorb the r­esidual heat
Warranty
• 5-Year limited heat exchanger warranty*
*See Commercial Warranty Certificate for c
­ omplete
information
Mbtuh propane gas†
model
Size
Multiplier
136-399
512-825
926-1826
Same as natural gas
.94
.92 Indoor
.955 Outdoor (input)
.92 Outdoor (output)
†Multiplier x Nat. MBTUH = Pro. MBTUH
Gas Tank-Type
• 82% Thermal efficiency
• 136,000-1,826,000 Btu/h
• 180° F Maximum temperature setting
• Indoor and outdoor models
• For use with or without a circulating pump
• Spark-to-pilot (IID) system for ­minimal heat loss
• Glasslined cast iron headers handle any
­aggressive water condition
• Low lead compliant
• Natural and LP models
electrical ratings
model
Sizewith pump
136-399
331-399
512-1826
3.7 amps @ 120V (1/8 hp pump)
3.6 amps @ 120V (1/6 hp pump)
7.2 amps @ 120V (1/2 hp pump)
114
Specifications and DIMENSIONAL INFORMATION
Model number
style
MBTUH NATURAL GAS (X 1000)
DIMENSIONS (INCHES)
Temperature Rise –
(indoor)
(outdoor) Gallons Per Hour
With-out
With
In-
Out-
HeightJacket Gas Flue
Pump
Pumpdoordoor Input Output Input Output 40°F
100°F
140°F Width Overallheight
Conn.
Dia.
gbB136*gbBp136*
gbc186gbcp186
gbc264gbcp264
gbc331gbcp331
gbc399gbcp399
gbc512gbcp512
gbc627gbcp627
gbc726gbcp726
gbc825gbcp825
gbc926gbcp926
gbc962gbcp962
gbc1083gbcp1083
gbc1125gbcp1125
gbc1178gbcp1178
gbc1223
GBCP1223
GBC1287
GBCP1287
GBC1337
GBCP1337
GBC1413
GBCP1413
GBC1467
GBCP1467
GBC1570
GBCP1570
GBC1630
GBCP1630
GBC1758
GBCP1758
GBC1826
GBCP1826
•
•
•
•
•
•
•
•
•
–
•
–
•
–
•
–
•
–
•
–
•
–
•
•
•
•
•
•
•
•
•
•
•
–
•
–
•
–
•
–
•
–
•
–
•
–
136.0
181.0
264.0
334.0
399.0
511.5
627.0
726.0
825.0
–
961.7
–
1124.7
–
1222.5
–
1336.6
–
1467.0
–
1630.0
–
1825.6
112.0
148.0
216.0
274.0
327.0
419.4
514.1
595.4
676.5
–
788.6
–
922.2
–
1002.4
–
1096.0
–
1202.9
–
1336.5
–
1496.9
136.0
181.0
264.0
334.0
399.0
511.5
627.0
726.0
825.0
926.0
–
1083.0
–
1178.0
–
1287.0
–
1413.0
–
1570.0
–
1758.0
–
112.0
148.0
216.0
274.0
327.0
419.4
514.1
595.4
676.5
759.3
–
888.1
–
966.0
–
1055.3
–
1158.7
–
1287.4
–
1441.6
–
330
445
640
822
967
1240
1520
1760
2000
3345
2331
2625
2727
2856
2964
3120
3240
3425
3556
3806
3952
4262
4426
132
178
256
328
387
496
608
704
800
898
933
1050
1091
1142
1185
1248
1296
1370
1423
1522
1581
1705
1770
94
127
183
235
276
354
434
503
571
641
665
750
779
816
847
891
926
979
1016
1087
1129
1218
1264
14-1⁄4
18-1⁄4
22-3⁄8
25-3⁄4
29-1⁄4
32-3⁄4
37-1⁄2
41-5⁄8
45-3⁄4
52-3⁄8
52-3⁄8
59-1⁄4
59-1⁄4
63-5⁄8
63-5⁄8
68-5⁄8
68-5⁄8
74-7⁄8
74-7⁄8
81-1⁄8
81-1⁄8
89-3⁄8
89-3⁄8
45
40
40
40
40
57
57
57
57
–
68-3⁄4
–
74-1⁄2
–
74-1⁄2
–
76-1⁄2
–
76-1⁄2
–
79-1⁄2
–
81-1⁄2
30-1⁄8
38
38
38
38
33
33
33
33
–
33-1⁄2
–
33-1⁄2
–
33-1⁄2
–
33-1⁄2
–
33-1⁄2
–
36-1⁄2
–
36-1⁄2
††Subtract 55 lbs. when ordering GBC models. *Equipped with bronze headers, all other models have glasslined cast iron headers.
GBC – cast iron headers. GBB – bronze headers. Add N after model number for Low NOx c
­ onfiguration on 186-399 models.
1⁄2
3⁄4
3⁄4
3⁄4
3⁄4
1
1
1
1
1
1
1
1
1
1
1-1⁄4
1-1⁄4
1-1⁄4
1-1⁄4
1-1⁄4
1-1⁄4
1-1⁄4
1-1⁄4
6
6
7
8
9
10
12
12
14
–
14
–
16
–
16
–
18
–
18
–
18
–
20
SHIPPING WEIGHT††
(Indoor) (Outdoor)
195
195
191
200
214
220
234
240
253
260
510
535
520
545
630
685
660
720
–
790
760­–
–
850
800
–
–
910
860
–
–
975
930
–
–
1065
1000
–
–
1120
1040
–
–
1150
1090
–
115
Medium Duty (G Series)
Features
Warranty
• 3-Year limited tank, ­upgradable to 5-years
and 1-year limited parts warranty*
*See Commercial Warranty Certificate for c
­ omplete information
(With
Optional Kit)
F
E
EliteXpress
48 Hour
F
3/4" N.P.T.
RELIEF
VALVE
OPENING
DELIVERY
E
3/4"
T&P
C
A B
HOT & COLD
G
SIDE TAPS
1/2"
A
B
C
G50-65, G75-75 & G100-65
Side taps on 48, 75 & 98 gallon models only
G50-65
water connections are 3/4" NPT
G75-75 & G100-65LP
water ­connections are 1" NPT
G
1/2" GAS
CONNECTION
D
Gas Tank-Type
• 80% thermal efficiency
• 54,000-80,000 Btu/h
• 48, 75, 98 and 100-Gallon capacities
• 180° F maximum t­emperature setting for
G75-75N model; all other models 160° F
Maximum temperature setting
• Proprietary steel formulation with a unique
coat of high t­emperature porcelain enamel
­maximizes ­corrosion resistance resulting in a
superior tank design
• Magnesium anode rods ensure c
­ orrosion ­
resistance for a long tank life
• Rigid foam insulation provides ­superior ­insulating
­qualities, improves efficiency and reduces
operating costs
• Factory installed CSA/ASME rated temperature
and pressure relief valve
• Factory installed full-port, full-flow brass
drain valve
• Low lead compliant
2"
D
G100-80
water connections
are 1" NPT
116
MODEL
NUMBER
recovery capacitieS
GAL.
CAP.
DIMENSIONAL INFORMATION (All dimensions shown in inches)
INPUT (BTU/H) THERMAL TEMP. RISE – G.P.H.
NAT. & LP
EFFIC.
40° F 100° F 130° F
AB
C
D
E
F
G
CLEARANCE TO COMBUST. TOP
FRONT
REAR
APPROX.
SHIP. WT. (LBS)
G50-60N†*
48
60,000
80%
107
43
33
61-3/4
58-1/2
21-3/4
14
4
11
51-3/4
0
3
12
150
G50-54LP*
48
54,000
80%
86
34
26
61-3/4
58-1/2
21-3/4
14
4
11
51-3/4
0
3
12
150
G75-75N-2†*
75
75,100
80%
182
73
56
64
60
26-1/4
13-1/4
4
11
53-1/4
1
3
2
320
G75-76LP*
75
75,100
80%
182
73
56
64
60
26-1/4
13-1/4
4
11
53-1/4
1
3
2
320
G100-80
100
80,000
80%
194
78
60
69-5/8
65-3/4
28-1/4
11
4
15
57-13/16
1
Alcove
12
410
G100-80N†
100
76,000
80%
184
74
57
69-5/8
65-3/4
28-1/4
11
4
15
57-13/16
1
Alcove
12
410
G100-76LP*
98
75,100
80%
182
73
56
67-7/8
64
27-1/4
14-7/8
4
11
57-3/16
1
3
12
350
Recovery ratings are based on thermal efficiencies obtained in a CSA certified laboratory.
†Meets 40ng/J NOx requirements.
*FVIR Compliant
117
Medium Duty Ultra Low NOx (G-UN Series)
Features
EliteXpress
48 Hour
DELIVERY
F
E
H
C
A B
*See Commercial Warranty Certificate for c
­ omplete
information
HOT
WATER
CONNECTION
H
COLD
WATER
CONNECTION
I
Warranty
• 3-Year limited tank, ­upgradable to 5-years
and 1-year limited parts warranty*
G
SIDE
TAPS
3/4" N.P.T
Gas Tank-Type
• 80% thermal efficiency
• 75,100 Btu/h
• 75 and 98-Gallon capacities
• 180° F Maximum temperature setting
• Power assist burner design ­incorporates
­stainless steel multi-port burner tubes for
long term ultra low NOx ­performance, less
than 14 ng/J
• Sight glass allows for burner observation
• Burner design is removable and highly resistant
to the effects of negative air pressure
• Most standard models certified to 7,700 feet
above sea level; high altitude kits available
for up to 10,200 feet. See spec sheet for
­exceptions and variants
• Side water connections for space saving
applications
• Durable silicon nitride ignitor (HSI)
• Low lead compliant
D
118
MODEL
NUMBER
recovery capacitieS
GAL.
CAP.
DIMENSIONAL INFORMATION (All dimensions shown in inches)
INPUT (BTU/H) THERMAL TEMP. RISE – G.P.H.
NAT.
EFFIC.
40° F 100° F 130° F
AB
C
D
E
F
G
H
I
APPROX.
SHIP. WT. (LBS)
G75UN
75
75,100
80%
182
73
56
64-1/8
60-1/4
26-1/4
14-1/4
4
11
52-1/4
1
33-3/4
300
G100UN
98
75,100
80%
182
73
56
67-7/8
64
27-1/8
14-1/4
4
11
56-1/8
1
34-3/4
370
119
Power Vent Medium Duty (GPV Series)
Features
• CSA/ASME rated temperature and pressure
relief valve
• Certified up to 7,700 feet above sea level
• Low lead compliant
• Natural and LP models
Easier, Less Costly V
­ enting
• Installs with PVC, ABS, or CPVC vent options
with vertical or h
­ orizontal ­termination
• Side ­connections ­available for ease of
­installation and ­flexibility
• Maximum
­
vent length is 95 ­equivalent feet
using 4” PVC
•V
ents up to 35 equivalent feet using 3”
PVC pipe
EliteXpress
48 Hour
DELIVERY
POWER VENT
ASSEMBLY
ANODE ROD
G
G
HOT
WATER
CONNECTION
E
T&P FITTING
3/4" N.P.T.
Warranty
• 3-Year limited tank, ­upgradable to 5-years
and 1-year limited parts warranty*
*See Commercial Warranty Certificate for c
­ omplete
information
COLD
WATER
CONNECTION
Gas Tank-Type
• 80% Thermal efficiency
• 75,100 Btu/h
• 75-Gallon capacity
• 160° F Maximum temperature setting
• Superior tank design features proprietary
steel formulation with a unique coat of high
­temperature porcelain enamel to maximize
­corrosion resistance
• FVIR compliant, maintenance free with no filters
to clean
• Flammable vapor detection ­sensor disables
the heater in the presence of flammable vapor
accumulation
• Integrated self-diagnostic system
• Integral automatic powered blower ­assists
­quietly bringing in c
­ ombustion air and
­discharging combustion gases
• Environmentally friendly burner is 40 ng/J NOx
compliant
• Patented magnesium anode rod ­design with
resistor protects the tank from corrosion
• Hot surface ignition (HSI) for less fuel
­consumption versus a standing pilot
• Self-cleaning
• Full-port, full-flow brass drain valve
C
A B
F
SIDE TAPS
1/2"
D
120
MODEL
NUMBER
recovery capacitieS
GAL.
CAP.
INPUT (BTU/H)
NAT. & LP
DIMENSIONAL INFORMATION (All dimensions shown in inches)
THERMAL
EFFIC.
TEMP. RISE – G.P.H.
40° F
100° F
120° F
AB
C
D
E
F
G
APPROX.
SHIP. WT. (LBS)
GPV75-75FV-2
75
75,100
80%
182
73
61
71-7/8
60-1/8
26-1/4
14-3/4
11
53-1/4
1
330
GPV75-75PFV-2
75
75,100
80%
182
73
61
71-7/8
60-1/8
26-1/4
14-3/4
11
53-1/4
1
330
Maximum and Minimum Vent Lengths for 3” and 4” Vents
From Sea level through 2,000 ft. above Sea level
Model
75-Gallon
Vent System
Diameter
Min. Allowed Equivalent Vent
Lengths (Each Pipe Run)
Max. Allowed Equivalent Vent
Lengths (Each Pipe Run)
Vent System
Termination(s)
3 Inches
10 Feet
50 Feet
90° Elbow
4 Inches
10 Feet
100 Feet
90° Elbow
For the 3" and 4" vent, one 90° elbow is approximately equal to 5 feet of pipe.
One 45° elbow is approximately equal to 2.5 feet of pipe.
NOTICE: The mixing of 3" and 4" vent pipe is not recommended. If 4" pipe is used, a 3" to 4"
reducer fitting is recommended at the rubber coupling.
This water heater is supplied with a 3" Schedule 40 PVC 90° vent ­terminal.
When venting with 4" pipe, a Schedule 40 PVC 90° vent t­ erminal must be used. Screens for
both 3" and 4" vent terminals have been included.
121
Power Direct Vent Medium Duty (GPDV Series)
Features
• Low lead compliant
• Natural and LP models
Easier, Less Costly V
­ enting
• Installs with PVC, ABS, or CPVC vent options
with vertical or h
­ orizontal ­termination
• Side ­connections are a
­ vailable for ease of
­installation and ­flexibility
•M
aximum vent length is 100 equivalent feet
using 4” vent pipe and 50 equivalent feet
using 3” vent pipe
Warranty
• 3-Year limited tank, ­upgradable to 5-years
and 1-year limited parts warranty*
T&P FITTING
3/4" N.P.T.
*See Commercial Warranty Certificate for c
­ omplete
information
Gas Tank-Type
• Meets or exceeds a minimum of 80% thermal
efficiency (non-­condensing)
• 47,000-75,100 Btu/h
• 50 and 75-Gallon capacities
• 160° F Maximum temperature setting for
50-gallon models and 180° F for 75-gallon
models
•S
ealed combustion
•F
lammable vapor detection ­sensor disables
the heater in the presence of flammable vapor
accumulation
• Integrated self-diagnostic system
• Integral automatic powered blower ­assists
­quietly bringing in c
­ ombustion air and
­discharging combustion gases
• Environmentally friendly burner is 40 ng/J NOx
compliant
• Patented anode rod d
­ esign with resistor
­protects tank from corrosion
• Hot surface ignition (HSI)
• Self-cleaning
• CSA/ASME rated temperature and pressure
relief valve
• Certified up to 7,700 or 10,200 feet above
sea level, refer to venting chart on next page
COMBUSTION
AIR INLET
COMBUSTION
EXHAUST
(VENT)
I
H
COLD
WATER
CONNECTION
H
HOT
WATER
CONNECTION
D
BA C
1/2"
G
E
F
122
MODEL
NUMBER
recovery capacitieS
GAL.
CAP.
DIMENSIONAL INFORMATION (All dimensions shown in inches)
INPUT (BTU/H) THERMAL TEMP. RISE – G.P.H.
NAT. & LP
EFFIC.
40° F 100° F 140° F
AB
C
D
F
G
E
H
I
APPROX.
SHIP. WT. (LBS)
GPDV50-65
50
65,000
80%
148
59
42
67-5/8
68-3/8
59-3/8
21-3/4
14
8
52-3/4
3/4
31-1/2
210
GPDV50-65LP
50
65,000
80%
107
43
31
67-5/8
68-3/8
59-3/8
21-3/4
14
8
52-3/4
3/4
31-1/2
210
GPDV75-75
75
75,100
80%
171
68
49
70-3/8
71-1/4
60-1/2
26-1/2
15
11
53
1
36-3/4
325
GPDV75-76LP
75
75,100
80%
171
68
49
70-3/8
71-1/4
60-1/2
26-1/2
15
11
53
1
36-3/4
325
Air-Inlet and Venting Information
Vent & Combustion Air-Inlet
Min. Allowed Equivalent Vent & Combustion
Max. Allowed Equivalent Vent & Combustion
System Diameter (Inches)
Air-Inlet Lengths – Each Pipe Run (Ft.)
Air-Inlet Lengths – Each Pipe Run (Ft.)
Vent AND
Combustion
Sea Level – 3,001 Ft. –
6,000 Ft. –
7,701 Ft. –
Sea Level – 3,001 Ft. –
6,000 Ft. –
7,701 Ft. –
Sea Level –
3,001 Ft. –
6,000 Ft. –
7,701 Ft. –
MoDeL Air-Inlet System
2,000 Ft.
5,999 Ft.
7,700 Ft.
10,200 Ft.
2,000 Ft.
5,999 Ft.
7,700 Ft.
10,200 Ft.
2,000 Ft.
5,999 Ft.
7,700 Ft.
10,200 Ft.
Number
Termination(s)
Above S.L. Above S.L. Above S.L. Above S.L.
Above S.L. Above S.L. Above S.L. Above S.L.
Above S.L.
Above S.L. Above S.L. Above S.L.
GPDV50-65
GPDV75-75
3
3
4
3
3
4
3
3
4
3
3
4
3
3
4
–
–
4
3
3
4
–
–
–
7
7
7
8
8
8
7
7
7
8
8
8
7
7
7
–
–
8
7
7
7
–
–
–
50
40
100
50
40
100
50
40
100
25
20
100
50
40
100
–
–
50
25
20
100
–
–
–
90° Elbows
–
–
Concentric*
90° Elbows
–
90° Elbows
–
–
Concentric*
90° Elbows
–
• One 90° elbow is approximately equivalent to 5 feet of pipe. One 45° elbow is approximately equivalent to 2.5 feet of pipe.
* Use only Rheem 3 inch concentric termination.
123
Power Vent Kits
Features & Benefits
Floor
Floor
Exterior
Wall
Vertical
Chimney
Gas Tank-Type
• Inputs: use with inputs from 98,000 – 400,000
Btu/h
• Use with natural gas or LP
• Vent Length: use for vent lengths up to a
­maximum of 50 feet including the vent terminal
• Vent terminal can be installed through c­ ombustible
or non-combustible ­surfaces – heat shield is
provided
•V
enter can be connected to a vent termination on
an exterior wall
•V
ibration isolators are supplied to ­provide quiet
­operation
• Complete with mounting hardware
•V
enter is pre-wired with 40 feet of #18-4 copper
wire (24 volt)
•P
ower vent kits manufactured by Tjernlund
­Products, Inc. are tested and c­ ertified by CSA
for use on these Rheem commercial gas water
­heaters (not for use with GN, GP, and GX models)
124
Model
Vent
Kit
Part
No.
Draft
Hood
Outlet
Power Vent Kit Dimensions
Vent
Vent
Size Adapter*
G50-98
PV Kit 4
AP11646
5"
4"
5" x 4"
4
95
1.26
50 ft 7-7/8"
G75-125
PV Kit 4
AP11646
5"
4"
5" x 4"
5
170
1.51
50 ft 9-1/4" 11-5/8" 8-5/8"
G82-156
PV Kit 4
AP11646
6"
4"
6" x 4"
Note: Max Vent Length based on total length of straight vent pipe plus
10 feet for each 90 degree elbow and 5 feet for each 45 degree elbow.
G76-180
PV Kit 4
AP11646
6"
4"
6" x 4"
G37-200
PV Kit 5
AP11645
6"
6"
Not Req.
11"
G76-200
PV Kit 5
AP11645
6"
6"
Not Req.
G91-200
PV Kit 5
AP11645
6"
6"
Not Req.
G100-200(A)
PV Kit 5
AP11645
6"
6"
Not Req.
Vent Terminal Dimensions
Kit#
A
B
C
G72-250(A)
PV Kit 5
AP11645
6"
6"
Not Req.
G100-250(A)
PV Kit 5
AP11645
8"
6"
8" x 6"
G100-270(A)
PV Kit 5
AP11645
8"
6"
8" x 6"
G72-300(A)
PV Kit 5
AP11645
8"
6"
8" x 6"
G85-300(A)
PV Kit 5
AP11645
8"
6"
8" x 6"
G100-310(A)
PV Kit 5
AP11645
7"
6"
7" x 6"
G65-360(A)
PV Kit 5
AP11645
8"
6"
8" x 6"
G65-400(A)
PV Kit 5
AP11645
8"
6"
8" x 6"
G85-400(A)
PV Kit 5
AP11645
10"
6"
10" x 6"
*Note: Vent Pipe and Vent Adapter are NOT included.
PVC Venting not for use with Power Vent kits listed above.
7"
W
D
MotorMotorMaxHeight
Width
DepthInlet
Kit# Watts Amps Vent
(H)
(W)
(D)
Outlet
4"
6"
H
B
Rough in
Dimension
4
9"
9-1/2"
7" Sq.
8" Sq.
5
10-1/8"
9-1/2"
8-1/2" Dia.
9" Dia.
A Sq.
C
Note: Max Vent Length based on total length of straight vent pipe plus
10 feet for each 90 degree elbow and 5 feet for each 45 degree elbow.
For technical assistance, please call the
Tjernlund Help Line at 1-800-255-4208.
125
Tankless Temperature Upgrade Kits
Features
Warranty
• 5-Year limited heat exchanger warranty with
commercial upgrade, 5-year limited parts
­warranty and 1-year limited labor warranty*
*See Commercial Warranty Certificate for c
­ omplete
information
High Temperature
Chip ­Option ­
Increases the
­output
­temperature
from 140° F
max to
185° F max.
EZ-Link™ Cable
Connect two tankless water
­heaters together in a m
­ anifold
MIC-6 Manifold
Control System
Connects up to 6 tankless water
heaters together in a manifold
H95 and H84
High Efficiency
­Condensing Series
MIC-185 Manifold
Control System
Manifold and c
­ ontrol up to 6
­tankless models
Tankless Gas
• Indoor and outdoor condensing and
­mid-efficiency models
•8
5-185 Degree temperature range with
­commercial upgrade chip
• Remote control displays t­emperature settings
and ­maintenance codes
• High altitude option – up to 9,840 feet above
sea level
• EZ-Spec application sizing ­software
available online
• Condensing models feature:
- .92 - .94 EF with stainless steel condensing
heat exchanger
- Low cost, 3-inch PVC venting
- Centrotherm polypropylene venting
- Condensate neutralizer
• Mid-efficiency models feature:
- .82 EF
- 3 x 5 inch concentric venting
- Integrated condensate collector
• Low lead compliant
• Natural and LP models
MICS-180 Manifold ­Controller
Expansion Card
Add on to the MIC-185 for up to 20 units total
95 and 84
Mid-Efficiency Series
126
DESCRIPTION
FEATURES
GAS MODEL INPUT
TEMP.
NUMBERBTU/H
TYPE
RANGE
RTGH-95DVLN
11,000-
199,900
RTGH-95XLN
Indoor
Direct Vent
MIN. FLOW/ GPM @
ACTIVATION 77° RISE
GPM
MAX.
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
ENERGY INFO.
GPM @
SHIP.
CONNECTION
45° RISE MAX.
VENT
WEIGHT
ENERGY Recovery
MAX.
GPM WATER GAS HEIGHT WIDTH DEPTH
DIAM.
(LBS.)
FACTOR
EFFICIENCY
85° to
0.26/.040
4.9
8.4
9.5
3/4
3/4 27-1/2 18-1/2 9-3/4 2” or 3”
185° F
PVC 2-Pipe
82
.94
94%
11,000-
Outdoor
199,900
85° to
0.26/.040
4.9
8.4
9.5
3/4
3/4 27-1/2 18-1/2 9-3/4
185° F
82
.94
95%
RTGH-84DVLN
11,000-
157,000
85° to
0.26/.040
3.9
6.6
8.4
3/4
3/4 27-1/2 18-1/2 9-3/4 2” or 3”
185° F
PVC 2-Pipe
82
.92
92%
RTGH-84XLN
11,000-
Outdoor
157,000
85° to
185° F
82
.92
92%
RTG-95DVLN
11,000-
199,900
85° to
0.26/.040
4.3
7.4
9.5
3/4
3/4 25-5/8 13-7/8 9-7/8
3 by 5
185° F
Concentric
54
.82
84%
RTG-95XLN
11,000-
Outdoor
199,900
85° to
0.26/.040
4.3
7.4
9.5
3/4
3/4 23-5/8 13-7/8 8-7/8
185° F
54
.82
83%
RTG-84DVLN
11,000-
180,000
85° to
0.26/.040
3.9
6.7
8.4
3/4
3/4 25-5/8 13-7/8 9-7/8
3 by 5
185° F
Concentric
54
.82
84%
RTG-84XLN
11,000-
Outdoor
180,000
85° to
0.26/.040
3.9
6.7
8.4
3/4
3/4 23-5/8 13-7/8 8-7/8
N/A
185° F
54
.82
83%
Indoor
Direct Vent
Indoor
Direct Vent
Indoor
Direct Vent
0.26/.040
3.9
6.6
Kits for High Volume Commercial Use (140° to 185° F)
H95 High-Efficiency
H84 High-Efficiency
• RTG20240A............... for H95DVLN
• RTG20241A............... for H84DVLN
• RTG20240B................for H95DVLP
• RTG20241B................for H84DVLP
• RTG20240C.................. for H95XLN
• RTG20241C.................. for H84XLN
• RTG20240D.................. for H95XLP
• RTG20241D.................. for H84XLP
8.4
3/4
3/4
27-1/2 18-1/2
9-3/4
95 Mid-Efficiency
• RTG20236A.................. for 95DVLN
• RTG20236B.................. for 95DVLP
• RTG20236C.....................for 95XLN
• RTG20236D..................... for 95XLP
N/A
N/A
N/A
84 Mid-Efficiency
• RTG20237A.................. for 84DVLN
• RTG20237B.................. for 84DVLP
• RTG20237C.....................for 84XLN
• RTG20237D..................... for 84XLP
127
Large Volume Custom Heavy Duty (EVR, EVS, EHS Series)
Features
Optional Features
• Low water cut-off
• Pilot lights
• Manual limiting switches
• Alarm bell
• ­Shunt trip ­disconnect (field installed)
• ­Low or high water p
­ ressure switch
• And more!
Warranty
• 3-Year limited tank and 1-year limited parts
warranty*
*See Commercial Warranty Certificate for c
­ omplete
information
• Vertical round models above 90 kW at 208V, 240V, or 380V and
162 kW at 415V, 480V or 600V exceed the capacity of a single
control box and may require multiple control panels. Consult the
factory for specific details and optional construction.
• Vertical square construction is available as an option for models
that exceed the listed kW limits.
• Control panel heights on vertical round models may exceed tank
height – consult factory for specific heights on models with inputs
above 72 kW.
Electric Tank-Type
• 150, 200, 250, 300, 400, 500, 600, 750,
1,000, 1,250, 1500, 2,000 and 2,500-Gallon
storage capacities
• 144 kW through 900 kW
• 208, 240, 277, 380, 415, 480 and 600 Voltages
• Vertical round, vertical square and
horizontal models
• Glass lined steel tank
• Incoloy™ heating elements
• Internal fusing (above 120 amps)
•E
namel finished galvanized steel jacket
• Magnesium anodes
• Immersion thermostat
• Manual reset high limit
•F
ull length hinged doors with key lock
• Terminal block connections
• ASME temperature and pressure relief valve
•C
hannel iron skid base (except 150 &
200-gallon round models)
• 180° F temperature operation
• 125 PSI working pressure
• Hand-hole sediment cleanout
• Safety drain pan (square models)
•C
ontrol voltage on/off switch with pilot light
• Low lead compliant
128
MODEL
NUMBER
Vertical RounDd
EVRO150
EVRO200
EVRO250
EVRO300
EVRO400
EVRO500
EVRO600
EVRO800
EVRO1000
Vertical SQUAREd
EVS1250
EVS1500
EVS2000
EVS2500
HORIZONTAL
EHS0150
EHS0200
EHS0250
EHS0300
EHS0400
EHS0500
EHS0600
EHS0800
EHS1000
EHS1250
EHS1500
EHS2000
EHS2500
DIMENSIONAL INFORMATION (All dimensions shown in inches)
HEIGHT TO
COLD INLET
WATER CONNECTION
INLET
OUTLET
GAL.
CAP.
MAX.
KW
HEIGHT
WIDTH
DEPTH
APPROX.
SHIP. WT. (LBS)
150 200 250 300 400 500 600 750 950 144
162
162
162
162
396
396
396
396
65-1/2
78
92
80
80
92
92
104
128
32
32
34
40
46
46
52
52
52
38-3/4
38-3/4
40-3/4
46-3/4
52-3/4
52-3/4
60-3/4
60-3/4
60-3/4
7-3/4
7-3/4
19-1/2
21
22-1/2
22-1/2
24-1/2
24-1/2
24-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2-1/2
2-1/2
2-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2-1/2
2-1/2
2-1/2
650
750
1,165
1,350
1,590
1,700
2,010
2,450
3,160
1,250 1,500 2,000 2,500 900
900
900
900
132-1/2
128-1/2
140-1/2
146-1/2
64-1/2
70-1/2
76-1/2
82-1/2
64-1/2
70-1/2
76-1/2
82-1/2
23-1/4
25-1/4
27-1/4”
29
3
3
3
3
3
3
3
3
3,560
4,120
4,350
5,750
150 200 250 300 400 500 600 750 1,000
1,250 1,500 2,000 2,500 144
180
225
270
360
450
540
720
900
900
900
900
900
37
37
39
45
52
52
58
58
58
64
70
76
82
68-1/2
78
90-1/4
78-1/4
78-1/4
90-3/4
90-3/4
102-1/4
126-1/4
130-1/4
126-1/4
137-1/4
144-1/4
34-1/4
34-1/4
36-1/4
42-1/4
48-1/4
48-1/4
54-1/4
54-1/4
54-1/4
60-1/4
66-1/4
72-1/4
78-1/4
12
12
13
14-3/4
16
16
13-1/2
13-/12
13-1/2
15
16
17-1/2
16-1/2
2
2
2
2
2
2
2-1/2
2-1/2
2-1/2
3
3
3
3
2
2
2
2
2
2
2
2
2
3
3
3
3
1,180
1,370
1,450
1,530
1,750
1,860
2,340
2,850
3,040
3,750
4,340
4,580
6,060
129
Heavy Duty (E, ES Series)
Features
Easy Installation & Service
•C
ontrol box is located at the front of unit for
easy wiring during installation
–M
ultiple knockout holes accommodate a
variety of conduit sizes
• Exclusive! System Sentinal™ provides a
­diagnostic panel with LEDs that c
­ orrespond
to the number, location and status of each
element
• Exclusive! Full-port, full-flow, brass drain valve
for faster ­draining
• Minimum distance to ­combustible is zero inches
from jacket and 18 inches from access door
• All models approved for i­nstallation
on ­combustible flooring
• 3-Year limited tank, ­upgradable to
5-years and 1-year limited parts
warranty*
EliteXpress
48 Hour
DELIVERY
C
C
D
Warranty
D
1-1/2"
HOT OUTLET
NIPPLE
SYSTEM SENTINEL
T&P
2-1/2" HOT OULET
NIPPLE
B
*See Commercial Warranty Certificate for ­
complete information
In accordance with ANSI test procedures,
these models tested below the maximum
allowable standby loss levels of ASHRAE
(Part of the Federally mandated Energy ­
Policy Act (EPact)). Also exceeds energy
codes of all states including California
Energy Commission (CEC).
(With
Optional
Seal Kit)
B
A
Electric Tank-Type
• 98% Thermal efficiency
• 50 to 175-Gallon capacities
• Up to 438 gallons GPH at a 100 degree F rise
• 190° F Maximum delivered t­emperature for
E series; 160° F for ES50; 180° F for ES85 and
ES120 models
• Thick foam insulation for minimal standby heat loss
• 3 kW through 108 kW
•2
08, 240 or 480 VAC in either single phase or
3-phase; 277 VAC single phase
•2
000, 3000, 4000, 4500, 5000 and 6000 in the
four voltages; 9000 watt element at 480 VAC
• Available in 1, 3, 6, 9 or 12 element
­configurations for your specific kW application
• Elements
are Lifeguard™ stainless steel,
­screw-in type that resist burn out and corrosion
• Temperature and pressure relief valve at top of
175-gallon model and side on all other models
• Water connections: hot and cold water inlets are
2-1/2” NPT d
­ ielectric nipples on the 175-­gallon
model and 1-1/2” on all other m
­ odels
• Low lead compliant
A
SYSTEM SENTINEL
AUTOMATIC
TEMPERATURE
CONTROL
(IMMERSION ONLY)
36-1/8"
46-1/4"
1-1/2"
COLD INLET
NIPPLE
AUTOMATIC
TEMPERATURE
CONTROL
(IMMERSION ONLY)
2-1/2" COLD INLET
NIPPLE
5-7/8"
5"
50, 85 and 120 Gallon Models
175 Gallon Models
130
Model Numbers
RECOVERY CAPACITIES
Surface Mounted thermostatsimmersion thermostats
Tank Capacity In Gallons
Tank Capacity In Gallons
508512050
85120175
N/A
ES50-6-G
ES50-9-G
ES50-12-G
ES50-15-G
ES50-18-G
ES50-24-G
ES50-27-G
ES50-30-G
ES50-36-G
ES50-45-G
ES50-54-G
N/A
N/A
N/A
N/A
N/A
ES85-6-G
ES85-9-G
ES85-12-G
ES85-15-G
ES85-18-G
ES85-24-G
ES85-27-G
ES85-30-G
ES85-36-G
ES85-45-G
ES85-54-G
N/A
N/A
N/A
N/A
N/A
ES120-6-G
ES120-9-G
ES120-12-G
ES120-15-G
ES120-18-G
ES120-24-G
ES120-27-G
ES120-30-G
ES120-36-G
ES120-45-G
ES120-54-G
N/A
N/A
N/A
N/A
N/A
N/A
N/A
E50-6-G
E85-6-G
E120-6-G
E50-9-G
E85-9-G
E120-9-G
E50-12-G E85-12-G E120-12-G
E50-15-G E85-15-G E120-15-G
E50-18-G E85-18-G E120-18-G
E50-24-G E85-24-G E120-24-G
E50-27-G E85-27-G E120-27-G
E50-30-G E85-30-G E120-30-G
E50-36-G E85-36-G E120-36-G
E50-45-G E85-45-G E120-45-G
E50-54-G E85-54-G E120-54-G
N/A
N/A
N/A
N/A
N/A
N/A
N/A
E85A-81-GS E120A-81-GS
N/A
N/A
N/A
Dimensional information (All dimensions shown in inches)
Model
Number
A
B
C
D
E(s)50(A)
E(s)85(A)
E(S)120(A)
E175A
43-5/8
57-11/16
67-5/8
69-1/2
26-1/4
32
19
28-1/4
34
20
30-1/4
36
21
32-1/4 38-1/2 22-1/4
APPROX. Ship. Wt. (LBS)
STD.
ASME
270
350
430
–
320
380
460
700
E175A-3-G
E175A-6-G
E175A-9-G
E175A-12-G
E175A-15-G
E175A-18-G
E175A-24-G
E175A-27-G
E175A-30-G
E175A-36-G
E175A-45-G
E175A-54-G
E175A-60-G
E175A-72-G
E175A-81-G
E175A-108-G
INPUTEQUIVALENT
KW
BTU/h
3
6
9
12
15
18
24
27
30
36
45
54
81
108
Recovery in Gallons/Hr. (GPH) at Various Temperature Rises
10,236
20,473
30,709
40,946
51,182
61,418
81,891
92,128
102,364
122,837
153,546
184,256
276,388
368,518
40° F
WATER TEMPERATURE RATINGS
Min.Max.high
Modelthermostatdelivereddeliveredtemp.
numbertypetemp.temp.limit
ES50
ES85, ES120
E50, E85, E120
E175A
Surface
Surface
Immersion
Immersion
90° F
120° F
90° F
90° F
160° F
180° F
190° F
190° F
60° F
80° F
100° F
120° F
140° F
31201512 10 9
62413125 21 18
92614637 31 26
123826149 41 35
154 102 77 61
51
44
184 123 92 74
61
53
246164123 98 82 70
276184138111 92 79
307205154123 102 88
369246184147 123 105
461307230184 154 132
553369276221 184 158
838558419335 279 239
1116744558446 372 320
180° F
190° F
200° F
200° F
ASME construction available only on Immersion
Thermostat models. All models are North Carolina
Code compliant.
Minimum distance to combustibles - 0” from
jacket, 18” from access door. All models
­approved for installation on combustible
flooring.
131
PowerPack Heavy and Medium Duty (E Series)
Features
• Terminal block: all models are equipped with
U.L. listed terminal blocks
• All units are furnished with a fused 120 volt
­control circuit; this circuit is created by an
­internal multi-tap transformer that has four (4)
taps for the primary voltages, 208, 240, 277
and 480
(With
Optional
Seal Kit)
EliteXpress
48 Hour
DELIVERY
Warranty
• 3-Year limited tank, ­upgradable
to 5-years and 1-year limited
parts warranty*
B
8"
C
3/4"
T&P
D
*See Commercial Warranty Certificate
for ­complete information
In accordance with ANSI test procedures,
these models tested below the maximum
allowable standby loss levels of ASHRAE
(Part of the Federally mandated Energy
­Policy Act (EPact)). Also exceeds energy
codes of all states including California
Energy Commission (CEC).
SYSTEM SENTINEL
A
AUTOMATIC
TEMPERATURE
CONTROL
E
4 1/4"
Electric Tank-Type
• 98% Maximum recovery efficiency
• 13, 19.9, 30 and 40-Gallon ­capacities
• 3 kW through 36 kW
• 208, 240, 277 and 480 Voltages
• Field convertible
• Single phase and factory wired
• Lifeguard™ heating elements
• Immersion thermostat
• 3/4” Water connections
• 2-1/2” Rigid polyurethane foam insulation
• System Sentinel LED ­diagnostic ­system
• Integral fusing on each element
• Two anode rods for long life and corrosion
resistance
• Full-port, full-flow brass drain valve
• Factory installed CSA/ASME rated temperature
and ­pressure relief valve
• Low lead compliant
• Electrical connections: pre-wired, accessible
control box with multiple knock-outs on side
in size selections to match the National ­
Electric Code
• Single panel control box with hinged door:
provides i­mmediate access to all ­electrical
components and ­elements
2 1/2"
132
Model Numbers
RECOVERY CAPACITIES
immersion thermostats
Tank Capacity In Gallons
Input
KW
12
20
30
40
3
E12A-3-G
E20A-3-G
E30A-3-G
E40A-3-G
6
E12A-6-G
E20A-6-G
E30A-6-G
E40A-6-G
9
E12A-9-G
E20A-9-G
E30A-9-G
E40A-9-G
12
N/A
E20A-12-G
E30A-12-G
E40A-12-G
15
N/A
E20A-15-G
E30A-15-G
E40A-15-G
18
N/A
E20A-18-G
E30A-18-G
E40A-18-G
24
N/A
N/A
E30A-24-G
E40A-24-G
27
N/A
N/A
E30A-27-G
E40A-27-G
30
N/A
N/A
E30A-30-G
E40A-30-G
36
N/A
N/A
E30A-36-G
E40A-36-G
INPUTEQUIVALENT
KW
BTU/h
Recovery in Gallons/Hr. (GPH) at Various Temperature Rises
40° F
60° F
80° F
100° F
120°F
10,236
31211612 10 9
6
20,473
62413125 21 18
9
30,709
93624737 31 27
12
40,946 124836250 41 35
15
51,183
155 103
78
62
52
44
18
61,420
186 124
93
74
62
53
24
81,893
248165124 99
27
92,129
279186140112 93 80
30
102,366
310207155124 103 89
36
122,839
372248186149 124 106
83 71
Dimensional information (All dimensions shown in inches)
WATER TEMPERATURE RATINGS
ModelAPPROX.
Number
A
B
C
D
E
Ship. Wt. (LBS)
Min.Max.high
ModelGALLONthermostatdelivereddeliveredtemp.
number
CAPACITYtypetemp.temp.limit
E12A
28-1/2
19
24-1/4 14-3/4 26-1/4
135
E20A
36-1/2
19
24-1/4 14-3/4 26-1/4
160
E30A
49-1/4
19
24-1/4 14-3/4 32-1/2
192
E40A
53-3/4
21
26-3/4 16-1/2 32-1/2
228
All models are North Carolina and Massachusetts Code compliant.
140° F
3
E12A
13
Immersion
90°F
190° F
200° F
E20A
19.9
Immersion
90°F
190° F
200° F
E30A
30
Immersion
90°F
190° F
200° F
E40A
40
Immersion
90°F
190° F
200° F
133
Eclipse™ Non-Metallic Heavy and Medium Duty (ME Series)
Features
• Water connections at the top of the tank are
1” swivel nuts
• A ­nipple is ­installed on the outlet (1” x 3” long)
• The inlet has a vacuum valve ­connected with
a 1 x 1 x 3/4 tee and a 1” close nipple to the
swivel
• Low lead compliant
Easy Installation & Service
• Eclipse’s lightweight tank is e
­ asier to maneuver
and position
• Control circuit switch provided for dry fire
­protection during installation
• Bowl shaped tank bottom drains completely
• Recessed drain valve is out of the way of
brooms and s­ crubbers
Warranty
• 10-Year limited tank warranty*
Electric Tank-Type
• 98% Thermal efficiency
• Foam insulated for reduced standby heat loss
• Recovery rate: Up to 99 gallons GPH at 100
degree rise
• 170° F Maximum temperature setting
• 85 and 105-Gallon capacities
• 12.4, 18 or 24 kW
• Voltage options: 208, 240, or 480 VAC in either
single phase or 3-phase (277 VAC in single
phase only)
• Element wattages: 3100, 4500 or 6000 in each
of the four voltages. The elements are low watt
density design (46, 67, 90 watts/sq. in.)
with titanium sheath for superior protection
• Non-metallic tank – no anode rods required
• High density polyethylene dent and scratch
resistant jacket
• System Sentinel LED indicators are provided for
each element to show when power is on
• Four titanium elements for ­resistance to lime
build-up
• Full-port, full-flow, brass drain valve for faster
draining
• Temperature and pressure relief valve at top
of unit
*See Commercial Warranty Certificate
for ­complete information
In accordance with ANSI test procedures, these models
tested below the maximum allowable standby loss levels
of ASHRAE (Part of the Federally mandated Energy ­Policy
Act (EPact)). Also exceeds energy codes of all states
including California Energy Commission (CEC).
134
Model Numbers
RECOVERY CAPACITIES
Input
KW
Surface mounted thermostats
Tank Capacity In Gallons
85
105
12.4
ME85-12-G
ME105-12-G
18
ME85-18-G
ME105-18-G
24
ME85-24-G
ME105-24-G
INPUTEQUIVALENT
KW
BTU/h
Recovery in Gallons/Hr. (GPH) at Various Temperature Rises
40° F
60° F
80° F
12.4 42,309 12684 63
100° F
120°F
50 42
18
61,420
186
124
93
74
62
24
81,893
248
165
124
99
83
D
Dimensional information (All dimensions shown in inches)
Model APPROX.
Number
A
B
C
D
Ship. Wt. (LBS)
ME85
28-1/4
66-1/4
70-1/4
4-1/2
170
ME105
30-1/4
66-1/2
70-3/4
4-1/2
185
B C
WATER TEMPERATURE RATINGS
Min.Max.
ModelGALLONthermostatdelivereddelivered
number
CAPACITYtypetemp.temp.
ME85
85
Surface
90° F
170° F
ME105
105
Surface
90° F
170° F
A
135
Booster Heavy and Medium Duty (E10 Series)
Features
Long Life Tank Design
• Proprietary steel f­ormulation with a unique coat
of high temperature p
­ orcelain enamel
• Maximizes ­corrosion r­esistance resulting in a
­superior tank design
Long Life Heating ­Elements
­ lements f­eature
•S
eparate screw-in type e
a ­Nichrome wire f­ilament, ­embedded in
­magnesium oxide sealed in a ­copper tube
to ­resist w
­ ater ­chemical ­corrosion…for long
element life and a long life ­performance
• Elements are directly immersed in the water
for ­maximum recovery e
­ fficiency (98%) and are
easily changed by simply screwing new ones
into the tank
Warranty
• 3-Year limited tank, ­upgradable to 5-years
and 1-year limited parts warranty*
EliteXpress
48 Hour
DELIVERY
These models meet the energy ­efficiency
levels of ASHRAE (Part of the Federally
mandated Energy ­Policy Act (EPact)).
Also exceeds ­energy efficiency codes
of all states ­including California Energy
­Commission (CEC). All models are North
Carolina Code compliant.
Specifically designed
to support commercial
dish washers.
Electric Tank-Type
• 98% Thermal efficiency
• 10-Gallon ­capacity
• 6 kW through 54 kW
• UL approved field change to simple phase
• Certified for 150 PSI maximum working
pressure
• UL Sanitation (­standard)
• Factory wired three phase
• System Sentinel LED ­diagnostic ­system
• All units are f­urnished with a fused 120 volt
­control circuit. All c
­ ontrols (­thermostats, high
temperature limit, etc.) are operated off of this
basic 120 volt c
­ ontrol circuit. This circuit is
created by an i­nternal multi-tap transformer
of unique design that has four (4) taps for the
primary v­ oltages, 208, 240, 277 and 480
• Two heavy-duty anode rods help resist
­corrosion and e
­ xtend tank life
• Factory installed T&P valve
• Immersion thermostats
• 6-Inch stainless steel legs
• Low lead compliant
*See Commercial Warranty Certificate for c
­ omplete
information
136
OPTIONAL THERMOSTATS
(GS MODELS ONLY)
RECOVERY CAPACITIES
Model
Number
E10-6-G
INPUTEQUIVALENT
KW
BTU/h
6
20,473
Recovery in Gallons/Hr. (GPH) at Various Temperature Rises
40° F
60° F
80° F
100° F
120°F
140° F
62
41
31
25
21
18
E10-9-G
9
30,709
92
61
46
37
31
26
E10-12-G
12
40,946
123
82
61
49
41
35
E10-15-G
15
51,182
154
102
77
61
51
44
E10-18-G
18
61,418
184
123
92
74
61
53
E10-24-G
24
81,891
246
164
123
98
82
70
E10-27-G
27
92,128
276
184
138
111
92
79
E10-30-G
30
102,364
307
205
154
123
102
88
E10-36-G
36
122,837
369
246
184
147
123
105
E10-45-G
45
153,546
461
307
230
184
154
132
E10-54-G
54
184,256
553
369
276
221 184158
213/4"
81/4"
OUTLET
T&P
43/4"
17"
133/4"
53/4"
INLET
6"
CONTACTORS
FUSE BLOCKS (FUSED MODELS ONLY)
THERMOSTAT
11/4" HOT
OUTLET
NIPPLE
TEMPERATURE
LIMIT CONTROL
11/4" COLD
INLET
NIPPLE
TRANSFORMER
TERMINAL
BLOCK
211/2"
Approximate Weight – 110 Lbs.
WATER TEMPERATURE RATINGS
Min.Max.high
GALLONthermostatdelivereddeliveredtemp.
CAPACITYtypetemp.temp.limit
10
Immersion
90° F
190° F
200° F
137
Light Duty (ELD Series)
Features
Long Life Tank Design
• Proprietary steel f­ormulation with a unique coat
of high temperature p
­ orcelain enamel
• Maximizes ­corrosion r­esistance r­esulting in a
­superior tank design
*See Commercial Warranty Certificate for c
­ omplete
information
Consult Factory for Certification Requirements.
Long Life Heating ­Elements
EliteXpress
•P
atented resistor elements are designed with
a specially treated, double layer of magnesium
oxide and copper to resist corrosion
• Replacement elements screw in easily
Warranty
• 3-Year limited tank, ­upgradable to 5-years
and 1-year limited parts warranty*
48 Hour
HOT
WATER
CONNECTION
COLD
WATER
CONNECTION
ANODE
ROD
3/4" T&P
UL Approved Electric ­
Conversion Kits
• An easy way to convert standard models to
different wattages, volt or phase depending on
installation requirements
•D
esigned for ELD(S) models in all gallon capacities
• All parts needed for the electric conversion are
included in the kit
•P
rovides convenience for c­ ontractors, ­plumbers
and ­installers which saves time and money
DELIVERY
8"
B DIA.
Electric Tank-Type
• Up to .95 EF
• 30 to 120-Gallon capacities
• 170° F Maximum temperature setting for
ELD30, 40 and 52 models; all other models
have 180° F maximum temperature setting
• Short models available in 30, 40 and 50-gallon
capacities
• 3 kW through 12 kW
• 208, 240, 277 and 480 Voltages
• Simultaneous and non-simultaneous wiring,
single phase and three phase are available
• Heavy duty anode rod provides advanced
­technology and equalizes aggressive water
action
• Factory installed brass drain valve for faster
draining and servicing
• 2-1/2” of rigid polyurethane foam i­nsulation
provides s­ uperior ­insulating qualities resulting in
­reduced operating costs
• A surface mounted thermostat ­automatically
cycles on and off to m
­ aintain the water
­temperature at a desired preset level
• Low lead compliant
A
WATER CONNECTIONS ALL 3/4" NPT
138
ELECTRICAL CHARACTERISTICS AND CAPACITIES
(Non-Simultaneous/Single or Three Phase Operation)
Element
Wattage
Upper/lower
RECOVERY CAPACITIES GPH
@ TEMPERATURE RISE OF
40° F
60° F
80° F
100° F
Dimensional information (All dimensions shown in inches)
Model
Number
FULL LOAD CURRENT (AMPS)
(ALL TERMINALS)
120° F
208
240
277
480
3000/3000 31 20151210 14.412.510.8 6.3
4000/4000 41 27201613 19.216.714.4 8.3
4500/4500 46 31231815 21.618.816.2 9.4
5000/5000 51 34262017 24 20.818.110.4
6000/6000 61 41312520 28.8 25 21.712.5
ELECTRICAL CHARACTERISTICS AND CAPACITIES
(Simultaneous/Three Phase Operation)
Element
Wattage
Upper/lower
RECOVERY CAPACITIES GPH
@ TEMPERATURE RISE OF
40° F
60° F
80° F
100° F
FULL LOAD CURRENT (AMPS)
(Terminal L3/Terminals L1 & L2)
120° F
208
240
Gallon
Cap.
.A
B
APPROX.
Ship. Wt. (LBS)
ELDS30
30
30
22-1/4
105
ELDS40
38
31-1/2
23
135
ELDS52
47
32
26-1/4
150
ELD30*
30
47-1/2
19-1/4
100
ELD40*
40
48-1/8
20-1/4
105
ELD52*
50
58-1/2
20-1/4
125
ELD66
65
59-3/8
22-1/2
169
ELD80
80
59-1/2
23-3/4
176
ELD120
119.9
62-17/8
28-1/4
330
*170° F Maximum temperature setting
480
3000/3000 61 41312420 25/14.421.7/12.5
10.8/6.3
4000/4000 81 5441322733.3/19.228.9/16.7
14.4/8.3
4500/4500 91 6145373137.5/21.632.5/18.8
16.2/9.4
5000/5000 10268514134 41.6/2436.1/20.818/10.4
6000/6000 1228161494150.0/28.843.3/25.0
21.7/12.5
139
Point-of-Use (EGSP Series)
Features
Long Life Heating ­Elements
• Patented resistor elements are designed with
a specially treated, double layer of magnesium
oxide and copper to resist corrosion
Warranty
• 3-Year limited tank warranty, ­upgradable
to 5-years*
*See Commercial Warranty Certificate for c
­ omplete
information
These models meet the minimum energy factor
­requirements of ASHRAE (Part of the Federally mandated
Energy Policy Act (EPact)). Also exceeds energy codes of
all states including California Energy Commission (CEC).
All models are North Carolina and Massachusetts Code
compliant.
B
DIAMETER
Long Life Tank Design
• Proprietary steel f­ormulation with a unique coat
of high temperature p
­ orcelain enamel
•M
aximizes c
­ orrosion r­esistance r­esulting in a
­superior tank design
UL Approved Electric ­
Conversion Kits
• An easy way to convert standard models to
different wattages, volt or phase depending
on installation requirements
• Designed for EGSP models in all gallon
capacities
• All parts needed for the electric conversion
are included in the kit
• Provides c
­ onvenience for contractors,
plumbers and installers which saves time
and money
DELIVERY
HOT
WATER
OUTLET
B
3-1/2" (89mm)
HOT WATER
CONNECTION
A
COLD WATER
CONNECTION
Model:
EGSP2
Water Connections
1/2" NPT
3/4" T&P
EliteXpress
48 Hour
A
C
3/4" T&P
D
COLD
WATER
INLET
E
Models:
EGSP6, EGSP10,
EGSP15, EGSP20,
EGSP30
Electric Tank-Type
• 2-1/2, 6, 10, 15, 19.9 and 30-Gallon capacities
• 1440 Watts through 6,000 Watts
• 120, 208, 240, 277 and 480 Voltages
• Single phase only
• Premium grade anode rod p
­ rovides advanced
technology and equalizes aggressive water
action
• Rigid polyurethane foam i­nsulation provides
­superior i­nsulating qualities resulting in ­reduced
operating costs
• A surface mounted thermostat ­automatically
cycles on and off to m
­ aintain the water
­temperature at a desired preset level
• 170 degrees Fahrenheit maximum temperature
setting (except 2-1/2 gallon model)
• Temperature limiting control
• Temperature and pressure relief valve
• Low lead compliant
Water Connections
3/4" NPT
140
Dimensional information (All dimensions shown in inches)
ELECTRICAL CHARACTERISTICS
ModelMin.
max.
gal.APPROX.
Numberwattswattscap.
A
B
C
D
E
Ship. Wt. (LBS)
Elementfull load current in amperes
wattage
120 V
208 V
240 V
277 V
EGSP2
18
1,440
12.0n/an/an/an/a
1,500
1,440
1,500
2-1/2
14
9-3/4
—
—
—
480 V
EGSP6
1,500
6,000
6
15-1/8
15-3/4
12-5/8 11-5/8
4-1/4
41
12.5
7.2
EGSP10
1,500
6,000
10
22-7/8
15-3/4
20-3/8 19-3/8
4-1/4
53
2,000
16.7
9.6
8.3
7.2
4.2
EGSP15
1,500
6,000
15
24-1/4
17-3/4
21-7/8 19-3/8
4-5/8
65
22-5/8 19-5/8
5-1/8
76
20.8
12.0
10.4
N/A
N/A
3
115
EGSP20
1,500
6,000
19.9
25-1/8
19-3/4
EGSP30
1,500
6,000
30
32
22-1/4
2,500
14.4
12.5
10.8
6.3
Basic model numbers are listed. When ordering specify electrical input to determine specific model number:
Basic Model: EGSP6 Specified Input: 6,000 Watts Specified Model Number: EGSP6-6
Use CEGSP Prefix for Canadian Models.
4,500n/a
21.6
18.8
16.2
9.4
6,000n/a
28.8
25.0
21.7
12.5
WATER TEMPERATURE RATINGS
ELECTRICAL CHARACTERISTICS
thermostat type
Max. delivered temp.
high temp. limit
110° F
170° F
190° F
ELEment avaiability
120 V
208 V
23
Min. delivered temp.
surface
wattage
23
240 V
277 V
480 V
1,440
**Y
N/An/A N/An/A
1,500yy
**yn/an/a
2,000yyyyy
2,500yyyn/an/a
3,000yyyyy
4,500n/ay
*y
*y
*y
6,000n/A
Yyyy
*Not available in EGSP6 & EGSP10
**EGSP2 available only in these configurations
3,000
Element
wattage
25.0
6.3n/an/a
TEMPERATURE rise - DEGREES F - GALLONS PER HOUR
40° F
60° F
80° F
100° F
120° F
140° F
1,440
15
10
7
6
5
4
1,500
15
10
8
6
5
4
2,000
20
14
10
8
7
6
2,500
25
17
13
10
8
–
3,000
30
20
15
12
10
9
4,500
4630 23 18 1513
6,000
6141 30 24 2017
141
Storage Tanks (ST Series)
Features
Warranty
• 5-Year limited tank warranty
*See Commercial Warranty Certificate for c
­ omplete
information
EliteXpress
48 Hour
These models exceed the minimum efficiency
­requirements of ASHRAE (Part of the Federally mandated
Energy Policy Act (EPact).
DELIVERY
Vertical models designed
for applications that
require large quantities of
potable hot water in short
periods of time.
Storage Tanks
• 80, 115 and 175-Gallon capacities
• Unique steel formulation with high ­temperature
porcelain enamel m
­ aximizes corrosion
­resistance and results in a superior tank design
• Heavy duty magnesium anode rod(s) installed
for longer life
• Rigid 2” polyurethane foam i­nsulation provides
superior i­nsulating ­qualities and results in
reduced operating costs
• Our patented process of injecting foam into the
insulating cavity
adds additional durability and toughness to the
baked enamel steel outer jacket
• Circulating line connections and hot outlet are
2” NPT on the ST80 and ST120 and 2-1/2”
NPT on the ST175
• Other openings are provided for r­elief valve and
temperature control. ST175 equipped with a
­hand-hole cleanout
• All commercial storage tank models are certified
to ASME boiler and pressure vessel code
standards
• Low lead compliant
ASME
142
Tank information and Dimensional information (All dimensions shown in inches)
Modelgal.
Water Connections
APPROX. Ship. Wt. (LBS)
Max. working pressure
Number
Cap.
A
B
C
Dtop outletfront sidestandard
ASMEstandard
ASME
ST80(A)
80
58-5/16
24-3/16
13-3/16
6-3/16
2
2
220
260 150 PSI
125 PSI
ST120(A)
115
59-1/4
28-1/4
11-1/16
4-1/16
2
2
300
340
150 PSI
160 PSI
ST175(A)
175
67-1/4
32-1/4
12-9/16
5-9/16
2-1/2
2-1/2
600
600
150 PSI
150 PSI
1" NPT
RELIEF VALVE
OPENING
HOT OUTLET
OPENING
HOT
3/4" NPT
THERMOMETER
OPENING
B
3/4" NPT
AQUASTAT
OPENING
A
OPENINGS
FOR
CIRCULATING
LINES
D
C
143
Large Volume Storage Tanks (ST, STU Series)
Features
Warranty
ASME
• 5-Year limited tank warranty*
*See Commercial Warranty Certificate for c
­ omplete
information
Jacketed models meet or exceed the minimum efficiency
requirements of ASHRAE (Part of the Federally mandated
Energy Policy Act (EPact)
TANK INFORMATION
MODELGALLONMAXIMUM WORKING
NUMBER
CAPACITY
PRESSURE ASME
ST(U)200A
200
150 PSI
ST(U)260A
257
125 PSI
ST(U)320A
318
125 PSI
ST(U)430A
432
125 PSI
ST(U)500A
504
125 PSI
ST(U)750A
752
125 PSI
ST(U)950A
940
125 PSI
Jacketed and non-jacketd
vertical models designed
for applications that require
large quantities of potable
hot water in short
periods of time.
Storage Tanks
• 200, 260, 320, 430, 500, 750 and 950-Gallon
capacities
• Unique steel formulation with high ­temperature
porcelain enamel m
­ aximizes corrosion
­resistance and results in a superior tank design
• Heavy duty magnesium anode rod(s) installed
for longer life
• Rigid 2” polyurethane foam i­nsulation provides
superior i­nsulating ­qualities and results in
reduced operating costs
• Our patented process of i­njecting foam into
the ­insulating cavity adds ­additional durability
and toughness to the baked enamel steel outer
jacket
• Circulating line/cold inlet c
­ onnections are 3”
NPT (2-1/2” on 200 gallon) and hot outlet is 2”
• All commercial storage tank models are certified
to ASME boiler and pressure vessel code
standards
• Low lead compliant
144
Model
Water Connections
Number
A
B
C
Dtop outletfront side
ST200A
79-1/2
34
13-3/16
18-3/16
2-1/2
2-1/2
APPROX.
Ship. Wt. (LBS)
2" NPT
1-1/4" NPT T&P
2-1/2" NPT
Dimensional information FOR VERTICAL ROUND JACKETED STORAGE TANKS (All dims. shown in inches)
1" NPT
T&P
B
872
ST260A
95-1/2
34
18
26
2
3
1108
ST320A
84-1/2
40
19-3/4
27-1/4
2
3
1290
ST430A
84-1/2
46
21
29
2
3
1626
ST500A
94-1/2
46
21
29
2
3
1765
ST750A
107-1/2
54
22-7/8
30-7/8
2
3
2330
ST950A
131-1/2
54
22-7/8
30-7/8
2
3
3010
B
A
A
3/4" NPT
AQUASTAT
OPENING
3/4" NPT
AQUASTAT
D
C
3/4" DRAIN
For model ST200A only.
1" DRAIN
PIPE
C
For ST260A, ST320A,
ST430A, ST500A, ST750A
and ST950A models.
1-1/4" NPT T&P
Dimensional information FOR VERTICAL Bare (non-JACKETED) STORAGE TANKS (All dims. shown in inches)
Model
Water Connections
Number
A
B
C
Dtop outletfront side
75-3/4
30
10-15/16
18-7/16
2-1/2
2-1/2
488
STU260A
88
30
15-3/4
23-3/4
2
3
464
STU320A
76
36
17-3/8
25-3/8
2
3
574
STU430A
76
42
18-7/8
26-7/8
2
3
816
STU500A
88
42
18-7/8
26-7/8
2
3
925
STU750A
100
48
20-7/8
28-7/8
2
3
1387
STU950A
124
48
20-7/8
28-7/8
2
3
1651
2" NPT
2-1/2" NPT
APPROX.
Ship. Wt. (LBS)
STU200A
D
1" NPT
RELIEF
VALVE
OPENINGS
(STU200A)
B
B
A
A
3/4"
3/4" NPT
AQUASTAT
D
C
1"
3/4" DRAIN
For model STU200A only.
4"
C
D
For STU260A, STU320A,
STU430A, STU500A, STU750A
and STU950A models.
145
CertiSpec Web
No downloading software!
CertiSpec now has easy online
access through the web.
New Features:
Computer Requirements:
• Internet connection required
CertiSpec Web
• Access through www.rheem.com
• Fuel cost calculator
•L
ink directly to Spec Sheets, Use & Care
­Manuals, Brochures and Revit Models
146
American
Rheem-Ruud
ModelBtu/h
Gal. Efficiency* Dia.
Height
ModelBtu/h
Gal.
Efficiency* Dia.
Height
Gas Tank Type – Atmospheric
CFG32-50T50-4NOV
50,000
50
n/a
22”
60-1/4”
G50-65
65,000
48
n/a
21-3/4”
62-1/2”
CG32-75T75-4NV
75,100
75
n/a
26”
63-1/2”
G75-75N
75,100
75
n/a
26-1/4”
64”
CG32-100T77-4NOV
75,100
98
n/a
26-1/2”
69-3/4”
G100-80
80,000
98
80%
28-1/4”
69-5/8”
Gas Tank Type – Atmospheric Dampered
BCG3-70T120-5N
120,000
71
80%
27-3/4”
69-3/4”
G75-125
125,000
75
80%
26-1/4”
65-1/2”
BCG3-80T150-6N
154,000
81
80%
27-3/4”
73”
G82-156
156,000
82
80%
26-1/4” 68-13/16”
BCG3-80T180-6N
180,000
81
80%
27-3/4”
67-1/2”
G76-180
180,000
76
80%
26-1/4” 68-13/16”
BCG3-80T199-6N
199,000
81
80%
27-3/4”
67-1/2”
G91-200
199,900
91
80%
26-1/4”
76-5/8”
BCG3-100T199-8N
199,000
100
80%
27-3/4”
75”
G91-200
199,900
91
80%
26-1/4”
76-5/8”
BCG3-100T200-8N
199,000
100
80%
30-1/4”
72’
G100-200(A)
199,900
100
80%
30-1/4”
73-1/16”
BCG3-100T250-8N
250,000
100
80%
30-1/4”
72”
G100-250(A)
250,000
100
80%
30-1/4”
73-1/4”
BCG3-65T250-8N
251,000
65
80%
27-3/4”
75”
G72-250(A)
250,000
72
80%
26-1/4”
71-1/16”
BCG3-100T275-8N
275,000
100
80%
30-1/4”
72”
G100-270(A)
270,000
100
80%
30-1/4”
73-7/8”
BCG3-65T300-8N
305,000
65
80%
27-3/4”
75”
G72-300(A)
300,000
72
80%
26-1/4”
71”
BCG3-85T360-8N
365,000
85
80%
27-3/4”
79-1/2”
G65-360(A)
360,000
65
80%
26-1/4” 70-11/16”
BCG3-100T390-8N
399,000
100
80%
30-1/4”
75-1/2”
G100-400(A)
399,900
100
80%
30-1/4”
76”
BCG3-85T500-8N
500,000
85
80%
27-3/4”
82-1/4”
GX90-550(A)
550,000
90
80%
30”
74-1/2”
Gas Tank Type – Atmospheric, Low NOx Emission Compliant
BCG3-70T120-6N0X
120,000
71
82%
27-3/4”
63”
GN75-125
125,000
75
80%
26-1/4”
65-1/2”
BCG3-80T150-6N0X
154,000
81
80%
27-3/4”
68”
GN82-156
156,000
82
80%
26-1/4” 68-13/16”
BCG3-100T180-6N0X
180,000
100
80%
27-3/4”
72”
GN76-200
199,900
76
80%
26-1/4” 68-13/16”
147
Conversion Charts
American
ModelBtu/h
Gal. Efficiency* Dia.
Gas Tank Type – Atmospheric, Low NOx Emission Compliant Continued
BCG3-95T199-6N0X
199,000
93
82%
27-3/4”
BCG3-100T199-6N0X
199,000
100
80%
27-3/4”
BCG3-100T200-6N0X
199,000
100
80%
27-3/4”
BCG3-100T250-6N0X
250,000
100
80%
27-3/4”
BCG3-100T275-6N0X
275,000
100
80%
27-3/4”
BCG3-85T366-6N0X
366,000
85
80%
27-3/4”
BCG3-85T390-6N0X
390,000
85
80%
27-3/4”
Gas Tank Type – Atmospheric, Ultra Low NOx Emission Compliant
BBCN3 75T75 NV
75,100
74
80%
25-1/4”
BCN3 100T75NV
75,100
98
80%
27-3/4”
BCL3-80T120-6NOX
120,000
81
82%
27-3/4”
BCL3-80T154-6NOX
154,000
81
82%
27-3/4”
BCL3-95T180-6NOX
180,000
93
82%
27-3/4”
BCL3-95T199-6NOX
199,000
93
82%
27-3/4”
(A)BCL3-95T250-6NOX
250,000
93
82%
27-3/4”
(A)BCL3-85T275-6NOX
275,000
85
82%
27-3/4”
(A)BCL3-85T366-6NOX
366,000
85
82%
27-3/4”
(A)BCL3-85T390-6NOX
399,000
85
82%
27-3/4”
Gas Tank Type – Power Vented
PVCG32-75T75-3N
70,000
75
80%
26”
*Based on ANSI Z21.10.3 Thermal Efficiency Test.
Height
Rheem-Ruud
ModelBtu/h
Gal.
Efficiency* Dia.
Height
72”
GN91-200
199,900
91
80%
26-1/4”
76-5/16”
72”
GN91-200
199,900
91
80%
26-1/4”
76-5/16”
72”
GN100-200(A)
199,900
100
80%
30-1/4”
73-1/16”
72”
GN100-250(A)
250,000
100
80%
30-1/4”
73-1/4”
72”
GN100-270(A)
270,000
100
80%
30-1/4”
73-7/8”
73”
GN65-360(A)
360,000
65
80%
26-1/4” 70-11/16”
73”
GN100-400(A)
399,900
100
80%
30-1/4”
76”
65-7/8”
G75UN
75,100
75
80%
26-1/4”
64-1/8”
70-1/2”
G100UN
75,100
98
80%
27-1/8”
67-7/8”
68-1/4”
GNU75-125
125,000
75
80%
26-1/4”
65-1/2”
68-1/4”
GNU82-156
156,000
82
80%
26-1/4” 68-13/16”
76”
GNU76-200
199,900
76
80%
26-1/4” 68-13/16”
76”
GNU91-200
199,900
91
82%
26-1/4”
76-5/16”
76”
GNU100-250(A)
250,000
100
80%
30-1/4”
73-1/4”
76”
GNU100-270(A)
270,000
100
82%
30-1/4”
73-7/8”
76”
GNU65-360(A)
360,000
65
80%
26-1/4” 70-11/16”
76”GNU100-400(A)
399,900
100
80%
30-1/4”
76”
70-1/4”
GPV75-75FV-2
75,000
75
n/a
26-1/4”
Conversion Charts
72”
148
American
Rheem-Ruud
ModelBtu/h
Gal. Efficiency* Dia.
Height
ModelBtu/h
Gas Tank Type – Power Direct Vented, Fully Condensing, Stainless Steel Tank & Heat Exchanger
PGC3 34-130-2NV
130,000
34
96%
22”
48-1/2”
HE55-130
130,000
PGC3 34-150-2NV
150,000
34
95%
22”
48-1/2”
HE55-160
160,000
PGC3 50-130-3NV
130,000
50
95%
22”
62-1/2”
HE55-130
130,000
PGC3 50-150-3NV
150,000
50
95%
22”
62-1/2”
HE55-160
160,000
PGC3 50-175-3NV
175,000
50
95%
22”
63-3/4”
HE55-199
199,000
PGC3 50-199-3NV
199,000
50
95%
22”
63-3/4”
HE55-199
199,000
Gas Tank Type – Power Direct Vented, Fully Condensing, Porcelain Coated Tank & Heat Exchange
(A)HCG3-60T120-3N
120,000
60
95%
27-3/4”
55-1/2”
HE55-130
130,000
(A)HCG3-100T150-3N
150,000
100
95%
27-3/4”
75-1/2”
GHE100-160(A)
160,000
(A)HCG3-100T199-3N
199,000
100
95%
27-3/4”
75-1/2”
GHE100-200(A)
199,900
(A)HCG3-100T250-3N
250,000
100
95%
27-3/4”
75-1/2”
GHE100-250(A)
250,000
(A)HCG3-100T300-3N
300,000
130
96%
33-1/8”
75-1/2”
GHE100-300(A)
300,000
(A)HCG3-100T400-3N
399,900
130
95%
33-1/8”
75-1/2”
GHE100-400(A)
400,000
*Based on ANSI Z21.10.3 Thermal Efficiency Test.
Gal.
Efficiency* Dia.
Height
55
95%
23-1/2”
52”
55
95%
23-1/2”
52”
55
95%
23-1/2”
52”
55
95%
23-1/2”
52”
55
95%
23-1/2”
52”
55
95%
23-1/2”
52”
55
95%
23-1/2”
52”
100
95%
26-1/4”
78-3/4”
100
95%
26-1/4”
78-3/4”
100
93%
26-1/4”
78-3/4”
100
93%
26-1/4”
78-3/4”
100
92%
26-1/4”
78-3/4”
Conversion Charts
149
American
Rheem-Ruud
Model
Kw
Gal. Efficiency**
Dia.
Height
Model
Kw
Gal.
Electric Tank-Type – Point-of-Use
LDCE31-06U
4.5 max
6
98%
14-1/4”
16-7/8”
EGSP6
6 max
6
LDCE31-12U
5.5 max
12
98%
16”
22-3/4”
EGSP10
6 max
10
LDCE31-19U
6 max
19
98%
18”
25”
EGSP20
6 max
19.9
Electric Tank-Type – Light Duty LDCE32-30L
12 max
30
98%
22”
29-1/2”
ELDS30
12 max
30
LDCE32-40L
12 max
40
98%
24”
31-5/8”
ELDS40
12 max
40
LDCE32-50L
12 max
50
98%
26”
31-5/8”
ELDS52
12 max
50
LDCE32-30H
12 max
30
98%
18”
45-1/4”
ELD30
12 max
30
LDCE32-40R
12 max
40
98%
20”
47-1/4”
ELD40
12 max
40
LDCE32-50R
12 max
50
98%
22”
47-3/4”
ELD52
12 max
50
LDCE32-65H
12 max
66
98%
22”
59-1/4”
ELD66
12 max
66
LDCE32-80H
12 max
80
98%
24”
59-1/4”
ELD80
12 max
80
LDCE32-119R
12 max
119
98%
28”
61-1/2”
ELD120
12 max
119
Electric Tank-Type – Heavy Duty
STCE/ITCE31-50
54 max
50
98%
21-3/4”
55-3/4”
ES/E50
54 max
50
STCE/ITCE31-80
54 max
80
98%
25-1/2”
60-1/4”
ES/E85
81 max
85
STCE/ITCE31-119
54 max
119
98%
29-1/2”
62-1/4”
ES/E120
81 max
119
Efficiency** Dia.
Height
98%
98%
98%
15-3/4”
15-3/4”
19-3/4”
15-1/8”
22-7/8”
25-1/8”
98%
98%
98%
98%
98%
98%
98%
98%
98%
22-1/4”
23”
26-1/4”
17-3/4”
22-1/4”
22-1/4”
23”
24-1/2”
28-1/4”
29-1/2”
31-1/2”
32-1/2”
45-1/2”
46-1/4”
57”
58-3/4”
59”
62-1/2”
98%
98%
98%
26-1/4”
28-1/4”
30-1/4”
43-5/8”
57-11/16”
67-5/8”
Conversion Charts
**Accepted heat transfer efficiency of immersion heating elements.
150
A. O. Smith
Rheem-Ruud
ModelBtu/h
Gal. Efficiency* Dia.
Height
ModelBtu/h
Gal.
Efficiency* Dia.
Height
Gas Tank Type – Atmospheric
BT-65
65,000
65
n/a
24”
65”
G65-65
65,000
63
n/a
23”
65”
BT-80
75,000
75
n/a
26-1/2”
61-1/8”
G75-75N
75,100
75
n/a
26-1/4”
64”
BT-100
75,000
100
n/a
27-3/4”
68-5/8”
G100-80
80,000
98
80%
28-1/4”
69-5/8”
Gas Tank Type – Atmospheric Dampered
BTR-120
120,000
71
80%
27-3/4”
69-3/4”
G75-125
125,000
75
80%
26-1/4”
65-1/2”
BTR-154
154,000
81
80%
27-3/4”
73”
G82-156
156,000
82
80%
26-1/4” 68-13/16”
BTR-180
180,000
81
80%
27-3/4”
67-1/2”
G76-180
180,000
76
80%
26-1/4” 68-13/16”
BTR-197
199,000
100
80%
27-3/4”
75”
G91-200
199,900
91
80%
26-1/4”
76-5/8”
BTR-198
199,000
100
80%
27-3/4”
75”
G91-200
199,900
91
80%
26-1/4”
76-5/8”
BTR-199
190,000
81
80%
27-3/4”
67-1/2”
G76-200
199,900
76
80%
26-1/4” 68-13/16”
BTR-200(A)
199,000
100
80%
30-1/4”
72’
G100-200(A)
199,900
100
80%
30-1/4”
73-1/16”
BTR-201(A)
199,900
32
80%
27-3/4”
45”
G37-200
199,900
35
80%
26-1/4”
49-1/4”
BTR-250(A)
250,000
100
80%
30-1/4”
72”
G100-250(A)
250,000
100
80%
30-1/4”
73-1/4”
BTR-251(A)
251,000
65
80%
27-3/4”
75”
G72-250(A)
250,000
72
80%
26-1/4”
71-1/16”
BTR-275(A)
275,000
100
80%
30-1/4”
72”
G100-270(A)
270,000
100
80%
30-1/4”
73-7/8”
BTR-305(A)
305,000
65
80%
27-3/4”
75”
G72-300(A)
300,000
72
80%
26-1/4”
71”
BTR-365(A)
365,000
85
80%
27-3/4”
79-1/2”
G65-360(A)
360,000
65
80%
26-1/4” 70-11/16”
BTR-400(A)
399,000
100
80%
30-1/4”
75-1/2”
G100-400(A)
399,900
100
80%
30-1/4”
76”
BTR-500(A)
500,000
85
80%
27-3/4”
82-1/4”
GX90-550(A)
550,000
90
80%
30”
74-1/2”
Gas Tank Type – Atmospheric, Low NOx Emission Compliant
BTN-80
80,000
74
80%
25-3/8”
66-3/8”
G75-75N
75,100
75
n/a
26-1/4”
62”
151
BTN-100
90,000
98
80%
26-1/2”
71-1/4”
G100-80N
76,000
98
80%
28-1/4”
69-5/8”
Conversion Charts
A. O. Smith
ModelBtu/h
Gal. Efficiency* Dia.
Gas Tank Type – Atmospheric, Low NOx Emission Compliant Continued
BTN-120
120,000
71
80%
27-3/4”
BTN-154
154,000
81
80%
27-3/4”
BTN-180
180,000
99
80%
27-3/4”
BTN-199C
199,000
99
82%
27-3/4”
BTN-199
199,000
99
80%
27-3/4”
BTN-200(A)
199,000
100
80%
27-3/4”
BTN-250(A)
250,000
100
80%
27-3/4”
BTN-270(A)
275,000
100
80%
27-3/4”
BTN-366(A)
366,000
85
80%
27-3/4”
BTN-400(A)
390,000
85
80%
27-3/4”
Gas Tank Type – Atmospheric, Ultra Low NOx Emission Compliant
BLN-80
75,100
74
80%
25-1/4”
BL-100
75,100
98
80%
27-3/4”
BTL-120
120,000
81
82%
27-3/4”
BTL-154
154,000
81
82%
27-3/4”
BTL-180
180,000
93
82%
27-3/4”
BTL-199
199,000
93
82%
27-3/4”
BTL-250(A)
250,000
93
82%
27-3/4”
BTL-275(A)
275,000
85
82%
27-3/4”
BTL-366(A)
366,000
85
82%
27-3/4”
BTL-400(A)
399,000
85
82%
27-3/4”
*Based on ANSI Z21.10.3 Thermal Efficiency Test.
Rheem-Ruud
Height
ModelBtu/h
Gal.
Efficiency* Dia.
Height
63”
68”
72”
72”
72”
72”
72”
72”
73”
73”
65-7/8”
70-1/2”
68-1/4”
68-1/4”
76”
76”
76”
76”
76”
76”
GN75-125
125,000
75
80%
26-1/4”
65-1/2”
GN82-156
156,000
82
80%
26-1/4” 68-13/16”
GN76-200
199,900
76
80%
26-1/4” 68-13/16”
GN91-200
199,900
91
80%
26-1/4”
76-5/16”
GN91-200
199,900
91
80%
26-1/4”
76-5/16”
GN100-200(A)
199,900
100
80%
30-1/4”
73-1/16”
GN100-250(A)
250,000
100
80%
30-1/4”
73-1/4”
GN100-270(A)
270,000
100
80%
30-1/4”
73-7/8”
GN65-360(A)
360,000
65
80%
26-1/4” 70-11/16”
GN100-400(A)
399,900
100
80%
30-1/4”
76”
G75UN
75,100
75
80%
26-1/4”
64-1/8”
G100UN
75,100
98
80%
27-1/8”
67-7/8”
GNU75-125
125,000
75
80%
26-1/4”
65-1/2”
GNU82-156
156,000
82
80%
26-1/4” 68-13/16”
GNU76-200
199,900
76
80%
26-1/4” 68-13/16”
GNU91-200
199,900
91
82%
26-1/4”
76-5/16”
GNU100-250(A)
250,000
100
80%
30-1/4”
73-1/4”
GNU100-270(A)
270,000
100
82%
30-1/4”
73-7/8”
GNU65-360(A)
360,000
65
80%
26-1/4” 70-11/16”
GNU100-400(A)
399,900
100
80%
30-1/4”
76”
Conversion Charts
152
A. O. Smith
Rheem-Ruud
ModelBtu/h
Gal. Efficiency* Dia.
Gas Tank-Type – Power Direct Vented (2 pipe)
BPD-75
70,000
75
n/a
26”
Gas Tank-Type – Power Direct Vented, Fully Condensing
BTX-100
100,000
50
95%
22”
BTH-120(A)
120,000
60
95%
27-3/4”
BTH-150(A)
150,000
100
95%
27-3/4”
BTH-199(A)
199,000
100
95%
27-3/4”
BTH-250(A)
250,000
100
95%
27-3/4”
BTH-300(A)
300,000
130
96%
33-1/8”
BTH-400(A)
399,900
130
95%
33-1/8”
BTH-500
499,900
130
95%
33-1/8”
BTH-500A
499,900
130
95%
33-1/8”
Height
ModelBtu/h
Gal.
Efficiency* Dia.
69-5/8”
66-3/4”
55-1/2”
75-1/2”
75-1/2”
75-1/2”
75-1/2”
75-1/2”
75-1/2”
75-1/2”
GPDV75-75
75,100
75
n/a
26-1/2”
HE55-100
100,000
55
95%
23-1/2”
HE55-130
130,000
55
95%
23-1/2”
GHE100-160(A)
160,000
100
95%
26-1/4”
GHE100-200(A)
199,900
100
95%
26-1/4”
GHE100-250(A)
250,000
100
93%
26-1/4”
GHE100-300(A)
300,000
100
93%
26-1/4”
GHE100-400(A)
400,000
100
92%
26-1/4”
GHE119-500
500,000
119
93%
32”
GHE125-500A
500,000
125
93%
32”
Height
Model
Height
70-3/8”
52”
52”
78-3/4”
78-3/4”
78-3/4”
78-3/4”
78-3/4”
78-1/2”
78-1/2”
*Based on ANSI Z21.10.3 Thermal Efficiency Test.
A. O. Smith
Model
Kw
Electric Tank-Type – Point-of-Use
DEL-6 S
2.5 max
DEL-10 S
6 max
DEL-15 S
6 max
DEL-20 S
6 max
Electric Tank-Type – Light Duty DEL-30 D
12 max
DEL-40 D
12 max
Gal.
Efficiency**
Rheem-Ruud
Dia.
6
98%
14-1/4”
15-1/2”
EGSP6
10
98%
18”
18-1/4”
EGSP10
15
98%
18”
26”
EGSP15
19.9
98%
21-3/4”
22-1/4”
EGSP20
30
98%
21-3/4”
30-7/8”
ELDS30
40
98%
24”
32-1/4”
ELDS40
Kw
Gal.
Efficiency** Dia.
Height
6 max
6 max
6 max
6 max
6
10
15
19.9
98%
98%
98%
98%
15-3/4”
15-3/4”
17-3/4”
19-3/4”
15-1/8”
22-7/8”
24-1/4”
25-1/8”
12 max
12 max
30
40
98%
98%
22-1/4”
23”
29-1/2”
31-1/2”
Conversion Charts
153
A. O. Smith
Rheem-Ruud
Model
Kw
Gal. Efficiency**
Dia.
Height
Model
Kw
Gal.
Efficiency** Dia.
Electric Tank-Type – Light Duty Continued
DEL-52 D
12 max
50
98%
26-1/2”
32-1/4”
ELDS52
12 max
50
98%
26-1/4”
DEN-30 D
12 max
30
98%
20-1/2”
34-1/2”
ELD30
12 max
30
98%
17-3/4”
DEN-40 D
12 max
40
98%
20-1/2”
45-1/8”
ELD40
12 max
40
98%
22-1/4”
DEN-52 D
12 max
50
98%
20-1/2”
54-7/8”
ELD52
12 max
50
98%
22-1/4”
DEN-66 D
12 max
66
98%
21-3/4”
60-3/4”
ELD66
12 max
66
98%
23”
DEN-80 D
12 max
80
98%
24”
59-3/8”
ELD80
12 max
80
98%
24-1/2”
DEN-120 D
12 max
119
98%
29-3/8”
62-7/16”
ELD120
12 max
119
98%
28-1/4”
Electric Tank-Type – Heavy Duty
DRE/DVE-52
54 max
50
98%
21-3/4”
55-3/4”
ES/E50
54 max
50
98%
26-1/4”
DRE/DVE-80
54 max
80
98%
25-1/2”
60-1/4”
ES/E85
81 max
85
98%
28-1/4”
DRE/DVE-120
54 max
119
98%
29-1/2”
62-1/4”
ES/E120
81 max
119
98%
30-1/4”
DSE-10
6 max
10
98%
18-3/4”
26-1/4”
E12A
9 max
13
98%
19”
DSE-20
18 max
20
98%
20-1/2”
27-1/4”
E20A
18 max
20
98%
19”
DSE-30
24 max
30
98%
20-1/2”
35-3/4”
E30A
36 max
30
98%
19”
DSE-40
36 max
40
98%
20-1/2”
45-3/4”
E40A
36 max
40
98%
21”
DSE-50
90 max
50
98%
20-1/2”
54-3/4”
E50A
54 max
50
98%
26-1/4”
DSE-65
90 max
65
98%
26-1/2”
50-1/2”
E85A
81 max
85
98%
28-1/4”
DSE-80
90 max
80
98%
28”
49-1/4”
E85A
81 max
85
98%
28-1/4”
DSE-100
90 max
100
98%
28”
58-1/4”
E120A
81 max
119
98%
30-1/4”
DSE-120
90 max
119
98%
30”
63-1/4”
E120A
81 max
119
98%
30-1/4”
Electric Tank-Type – Dishwasher Booster
CMC-5
54 max
5
98%
n/a
n/a
E10
54 max
10
98%
21-3/4”
SU-20
54 max
20
98%
n/a
n/a
E10
54 max
10
98%
21-3/4”
**Accepted heat transfer efficiency of immersion heating elements.
Height
32-1/2”
45-1/2”
46-1/4”
57”
58-3/4”
59”
62-1/2”
43-5/8”
57-11/16”
67-5/8”
28-1/2”
36-1/2”
49-1/4”
53-3/4”
43-5/8”
57-11/16”
57-11/16”
67-5/8”
67-5/8”
Conversion Charts
23”
23”
154
Bradford White
ModelBtu/h
Gal.
Gas Tank Type – Atmospheric
50T-65FB-3N
65,000
48
65T-65FB-3N
65,000
65
75T-80B-3N
76,000
75
100T-88B-3N
88,000
100
Gas Tank Type – Atmospheric Dampered
D-75T-125-3N
125,000
75
D-75T-160-3N
160,000
75
D-80T-180-3N
180,000
80
D-100T-199-3N
199,999
98
D-80T-199-3N
199,999
80
D-100S-199-3N
199,999
100
D-100L-199-3N
199,999
100
D-38T-155-3N
155,000
38
D-100S-250-3N(A)
250,000
100
D-100L-250-3N(A)
250,000
100
D-80T-250-3N(A)
250,000
80
D-100S-270-3N(A)
270,000
100
D-100L-270-3N(A)
270,000
100
D-75T-300-3N(A)
300,000
75
D-100L-300-3N(A)
300,000
100
D-65T-370-3N(A)
370,000
65
D-65T-399-3N(A)
399,999
65
Efficiency* Rheem-Ruud
Dia.
Height
ModelBtu/h
Gal.
Efficiency* Dia.
Height
n/a
22”
59-1/4”
G50-65
65,000
48
n/a
21-3/4”
62-1/2”
n/a
24”
63”
G65-65
65,000
63
n/a
23”
65”
80%
26”
62-3/8”
G75-75N
75,100
75
n/a
26-1/4”
64”
80%
28-1/4”
69-1/8”
G100-80
80,000
98
80%
28-1/4”
69-5/8”
80%
28-1/4”
72-1/4”
G75-125
125,000
75
80%
26-1/4”
65-1/2”
80%
28-1/4”
72-1/4”
G82-156
156,000
82
80%
26-1/4” 68-13/16”
80%
28-1/4”
71-7/8”
G76-180
180,000
76
80%
26-1/4” 68-13/16”
80%
28-1/4”
83-3/8”
G91-200
199,900
91
80%
26-1/4”
76-5/8”
80%
28-1/4”
71-7/8”
G76-200
199,900
76
80%
26-1/4” 68-13/16”
80%
30-1/4”
76-3/4”
G100-200(A)
199,900
100
80%
30-1/4”
73-1/16”
80%
30-1/4”
75”
G100-200(A)
199,900
100
80%
30-1/4”
73-1/16”
80%
28-1/4”
51”
G37-200
199,900
35
80%
26-1/4”
49-1/4”
80%
30-1/4”
76-3/4”
G100-250(A)
250,000
100
80%
30-1/4”
73-1/4”
80%
30-1/4”
75”
G100-250(A)
250,000
100
80%
30-1/4”
73-1/4”
80%
28-1/4”
71-7/8”
G72-250(A)
250,000
72
80%
26-1/4”
71-1/16”
80%
30-1/4”
74-1/4”
G100-270(A)
270,000
100
80%
30-1/4”
73-7/8”
80%
30-1/4”
75”
G100-270(A)
270,000
100
80%
30-1/4”
73-7/8”
80%
28-1/4”
74-3/8”
G72-300(A)
300,000
72
80%
26-1/4”
71”
80%
30-1/4”
75-3/8”
G100-310(A)
310,000
100
80%
26-1/4”
75”
80%
28-1/4”
73-1/4”
G65-360(A)
360,000
65
80%
26-1/4” 70-11/16”
80%
28-1/4”
73-1/4”
G65-399(A)
399,900
65
80%
26-1/4” 70-11/16”
155
Conversion Charts
Bradford White
Rheem-Ruud
ModelBtu/h
Gal. Efficiency* Dia.
Height
ModelBtu/h
Gal.
Efficiency* Dia.
Height
Gas Tank Type – Atmospheric Dampered Continued
D-80S-399-3N(A)
399,999
80
80%
30-1/4”
77-1/4”
G100-400(A)
399,900
100
80%
30-1/4”
76”
D-80L-399-3N(A)
399,999
80
80%
30-1/4”
71-1/2”
G100-400(A)
399,900
100
80%
30-1/4”
76”
D-80T-425-3N(A)
425,000
80
80%
28-1/4”
82-3/4”
G85-400(A)
399,900
85
80%
26-1/4” 78-13/16”
D-80L-450-3N(A)
450,000
80
80%
30-1/4”
69”
GX90-550(A)
550,000
90
80%
30”
74-1/2”
D-80T-505-3N(A)
505,000
80
80%
28-1/4”
82-3/4”
GX90-550(A)
550,000
90
80%
30”
74-1/2”
D-80L-505-3N(A)
505,000
80
80%
30-1/4”
69”
GX90-550(A)
550,000
90
80%
30”
74-1/2”
Gas Tank Type – Atmospheric, Low NOx Emission Compliant
75T-80B-3N
76,000
75
80%
26”
62-3/8”
G75-75N
75,100
75
n/a
26-1/4”
62”
100T-88B-3N
88,000
100
80%
28-1/4”
69-1/8”
G100-80N
76,000
98
80%
28-1/4”
69-5/8”
D-75T-125E-3N
125,000
75
80%
28-1/4”
72-1/4”
GN75-125
125,000
75
80%
26-1/4”
65-1/2”
D-75T-160E-3N
160,000
75
80%
28-1/4”
72-1/4”
GN82-156
156,000
82
80%
26-1/4” 68-13/16”
D-80T-199E-3N
199,999
80
80%
28-1/4”
71-7/8”
GN76-200
199,900
76
80%
26-1/4” 68-13/16”
D100T-199E-3N
199,999
98
80%
28-1/4”
83-3/8”
GN91-200
199,900
91
80%
26-1/4”
76-5/16”
D-100S-199E-3N
199,999
100
80%
30-1/4”
76-3/4”
GN100-200(A)
199,900
100
80%
30-1/4”
73-1/16”
D-100L-199E-3N
199,999
100
80%
30-1/4”
75”
GN100-200(A)
199,900
100
80%
30-1/4”
73-1/16”
D-100S-250E-3N(A)
250,000
100
80%
30-1/4”
76-3/4”
GN100-250(A)
250,000
100
80%
30-1/4”
73-1/4”
D-100L-250E-3N(A)
250,000
100
80%
30-1/4”
75”
GN100-250(A)
250,000
100
80%
30-1/4”
73-1/4”
D-100S-270E-3N(A)
270,000
100
80%
30-1/4”
74-1/4”
GN100-270(A)
270,000
100
80%
30-1/4”
73-7/8”
D-100L-270E-3N(A)
270,000
100
80%
30-1/4”
75”
GN100-270(A)
270,000
100
80%
30-1/4”
73-7/8”
D-65T-370E-3N(A)
370,000
65
80%
28-1/4”
73-1/4”
GN65-360(A)
360,000
65
80%
26-1/4” 70-11/16”
D-80S-399E-3N(A)
399,999
80
80%
30-1/4”
77-1/4”
GN100-400(A)
399,900
100
80%
30-1/4”
76”
D-80L-399E-3N(A)
399,999
80
80%
30-1/4”
71-1/2”
GN100-400(A)
399,900
100
80%
30-1/4”
76”
*Based on ANSI Z21.10.3 Thermal Efficiency Test.
Conversion Charts
156
Bradford White
ModelBtu/h
Gal. Efficiency* Dia.
Gas Tank Type – Atmospheric, Ultra Low NOx Emission Compliant
U-75T-80R-3N
76,000
75
80%
26”
U-100T-88R-3N
85,000
100
80%
28-1/4”
U-65L-155E-3N
155,000
65
84%
28-1/4”
U-65L-199E-3N
199,999
65
84%
28-1/4”
U-100L-199E-3N
199,999
100
84%
28-1/4”
U-100L-270E-3N
270,000
100
84%
28-1/4”
U-100L-399E-3N
399,999
100
84%
28-1/4”
Gas Tank-Type – Power Direct Vented, Fully Condensing
EF-60T-125E-3N(A)
125,000
60
96%
28-1/4”
EF-60T-150E-3N(A)
150,000
60
93%
28-1/4”
EF-60T-199E-3N(A)
199,999
60
92%
28-1/4”
EF-100T-150E-3N(A)
150,000
100
99.1%
28-1/4”
EF-1000T-199E-3N(A)
199,999
100
98.5%
28-1/4”
EF-1000T-250E-3N(A)
250,000
100
97%
28-1/4”
EF-1000T-300E-3N(A)
300,000
100
92%
28-1/4”
Gas Tank Type – Power Vented
TW4-75S-76FB-3N
75
76,000
80%
26”
Gas Tank-Type – Power Direct Vented (2 pipe)
PDX-50S-60FB-3N
48
60,000
n/a
22”
PDX-65S-65FB-3N
65
65,000
n/a
24”
PDX-75S-75FB-3N
75
70,000
n/a
26”
*Based on ANSI Z21.10.3 Thermal Efficiency Test.
Rheem-Ruud
Height
ModelBtu/h
Gal.
Efficiency* Dia.
Height
64-1/8”
69-13/16”
56”
56”
56”
56”
62-3/4”
57”
57”
57”
77-5/8”
77-5/8”
77-5/8”
77-5/8”
G75UN
75,100
75
80%
26-1/4”
64-1/8”
G100UN
75,100
98
80%
27-1/8”
67-7/8”
GNU82-156
156,000
82
80%
26-1/4” 68-13/16”
GNU76-200
199,900
76
80%
26-1/4” 68-13/16”
GNU100-200(A)
199,900
100
82%
30-1/4”
73-1/16”
GNU100-270(A)
270,000
100
82%
30-1/4”
73-7/8”
GNU100-400(A)
399,900
100
80%
30-1/4”
76”
GHE80-130(A)
130,000
80
97%
26-1/4”
69-5/8”
GHE80-150(A)
150,000
80
94%
26-1/4”
69-5/8”
GHE80-200(A)
199,000
80
94%
26-1/4”
69-5/8”
GHE100-160(A)
160,000
100
95%
26-1/4”
78-3/4”
GHE100-200(A)
199,000
100
95%
26-1/4”
78-3/4”
GHE100-250(A)
250,000
100
93%
26-1/4”
78-3/4”
GHE100-300(A)
300,000
100
93%
26-1/4”
78-3/4”
68-1/8”
68”
71-1/4”
71”
GPV75-75FV-2
75,000
75
n/a
26-1/4”
72”
GPDV50-65
65,000
50
n/a
21-3/4”
67-5/8”
GPDV65-65
65,000
65
n/a
23”
71-1/4”
GPDV75-75
75,100
75
80%
26-1/2”
70-3/8”
Conversion Charts
157
Bradford White
Model
Kw
Electric Tank-Type – Point-of-Use
LD-6U3-1
6 MAX
LD-10U3-1
6 MAX
LD-15U3-1
6 MAX
LD-20U3-1
6 MAX
LD-30U3-1
6 MAX
Electric Tank-Type – Light Duty LD-30L3-3
12 max
LD-40L3-3
12 max
LD-50L3-3
12 max
LD-30R3-3
12 max
LD-40R3-3
12 max
LD-50R3-3
12 max
LD-65R3-3
12 max
LD-80R3-3
12 max
LD-120R3-3
12 max
Gal.
Efficiency**
Rheem-Ruud
Dia.
Height
Model
6
98%
14”
16-1/2”
EGSP6
10
98%
16”
17-1/2”
EGSP10
15
98%
18”
20-1/4”
EGSP15
19
98%
18”
24-3/4”
EGSP20
30
98%
22”
30”
EGSP20
30
98%
20”
30”
ELDS30
40
98%
22”
31-1/4”
ELDS40
50
98%
24”
31-3/4”
ELDS52
30
98%
18”
46-1/2”
ELD30
40
98%
20”
46-7/8”ELD40
50
98%
22”
46-1/2”
ELD52
65
98%
22”
59-1/4”
ELD66
80
98%
24”
59-1/4”
ELD80
119
98%
28”
62-1/4”
ELD120
Kw
Gal.
Efficiency** Dia.
Height
6 max
6 max
6 max
6 max
6 max
6
10
15
19.9
19.9
98%
98%
98%
98%
98%
15-3/4”
15-3/4”
17-3/4”
19-3/4”
19-3/4”
15-1/8”
22-7/8”
24-1/4”
25-1/8”
25-1/8”
12 max
12 max
12 max
12 max
12 max
12 max
12 max
12 max
12 max
30
40
50
30
40
50
66
80
119
98%
98%
98%
98%
98%
98%
98%
98%
98%
22-1/4”
23”
26-1/4”
17-3/4”
22-1/4”
22-1/4”
23”
24-1/2”
28-1/4”
29-1/2”
31-1/2”
32-1/2”
45-1/2”
46-1/4”
57”
58-3/4”
59”
62-1/2”
Conversion Charts
158
Bradford White
Rheem-Ruud
Model
Kw
Gal. Efficiency**
Dia.
Height
Model
Kw
Gal.
Efficiency** Dia.
Electric Tank-Type – Heavy Duty
M-II-50-xx-3SF/CF
54 max
50
98%
24”
47-3/4”
ES/E50
54 max
50
98%
26-1/4”
M-II-80-xx-3SF/CF
54 max
80
98%
26”
60-1/4”
ES/E85
81 max
85
98%
28-1/4”
M-II-120-xx-3SF/CF
54 max
119
98%
30-1/4”
64-1/2”
ES/E120
81 max
119
98%
30-1/4”
12A-x-3
9 max
12
98%
16”
28”
E12A
9 max
13
98%
19”
20A-xx-3
18 max
20
98%
20”
27-1/2”
E20A
18 max
20
98%
19”
30A-xx-3
36 max
30
98%
20”
38”
E30A
36 max
30
98%
19”
40A-xx-3
36 max
40
98%
20”
48-1/4”
E40A
36 max
40
98%
21”
50A-xx-3
81 max
50
98%
24”
47-3/4”
E50A
54 max
50
98%
26-1/4”
80A-xx-3
81 max
80
98%
26”
60-1/4”
E85A
81 max
85
98%
28-1/4”
120A-xx-3
81 max
119
98%
30-1/4”
64-1/2”
E120A
81 max
119
98%
30-1/4”
Electric Tank-Type – Dishwasher Booster
L-I-6-xx-5CF
57 max
6
98%
n/a
n/a
E10
54 max
10
98%
21-3/4”
**Accepted heat transfer efficiency of immersion heating elements.
Height
43-5/8”
57-11/16”
67-5/8”
28-1/2”
36-1/2”
49-1/4”
53-3/4”
43-5/8”
57-11/16”
67-5/8”
23”
Conversion Charts
159
Lochinvar
Rheem-Ruud
ModelBtu/h
Gal. Efficiency* Dia.
Height
ModelBtu/h
Gal.
Efficiency* Dia.
Height
Gas Tank Type – Atmospheric
CGN065 065
65,000
65
n/a
24”
65”
G50-65
65,000
48
n/a
21-3/4”
62-1/2”
CGN075 075
75,000
75
n/a
26-1/2”
61”
G75-75N
75,100
75
n/a
26-1/4”
64”
CGN075 100
75,000
100
n/a
27-3/4”
68-1/2”
G100-80
80,000
98
80%
28-1/4”
69-5/8”
Gas Tank Type – Atmospheric Dampered
CGN120 070
120,000
71
80%
27-3/4”
69-3/4”
G75-125
125,000
75
80%
26-1/4”
65-1/2”
CGN150 080
154,000
81
80%
27-3/4”
73”
G82-156
156,000
82
80%
26-1/4” 68-13/16”
CGN180 080
180,000
81
80%
27-3/4”
67-1/2”
G76-180
180,000
76
80%
26-1/4” 68-13/16”
CGN200 032
199,000
32
80%
27-3/4”
45”
G37-200
199,900
35
80%
26-1/4”
49-1/4”
CGN200 080
199,000
81
80%
27-3/4”
67-1/2”
G91-200
199,900
91
80%
26-1/4”
76-5/8”
CGN200 100
199,000
100
80%
27-3/4”
75”
G91-200
199,900
91
80%
26-1/4”
76-5/8”
CGN199 100 (A)
199,000
100
80%
30-1/4”
72’
G100-200(A)
199,900
100
80%
30-1/4”
73-1/16”
CGN250 100 (A)
250,000
100
80%
30-1/4”
72”
G100-250(A)
250,000
100
80%
30-1/4”
73-1/4”
CGN250 065 (A)
251,000
65
80%
27-3/4”
75”
G72-250(A)
250,000
72
80%
26-1/4”
71-1/16”
CGN275 100 (A)
275,000
100
80%
30-1/4”
72”
G100-270(A)
270,000
100
80%
30-1/4”
73-7/8”
CGN305 065 (A)
305,000
65
80%
27-3/4”
75”
G72-300(A)
300,000
72
80%
26-1/4”
71”
CGN365 085 (A)
365,000
85
80%
27-3/4”
79-1/2”
G65-360(A)
360,000
65
80%
26-1/4” 70-11/16”
CGN400 100 (A)
399,000
100
80%
30-1/4”
75-1/2”
G100-400(A)
399,900
100
80%
30-1/4”
76”
CGN500 100 (A)
500,000
85
80%
27-3/4”
82-1/4”
GX90-550(A)
550,000
90
80%
30”
74-1/2”
Gas Tank Type – Atmospheric, Low NOx Emission Compliant
CXN120 070
120,000
71
82%
27-3/4”
63”
GN75-125
125,000
75
80%
26-1/4”
65-1/2”
CXN155 080
154,000
81
80%
27-3/4”
68”
GN82-156
156,000
82
80%
26-1/4” 68-13/16”
CXN180 100
180,000
100
80%
27-3/4”
72”
GN76-200
199,900
76
80%
26-1/4” 68-13/16”
CXN199 100 (A)
199,000
100
80%
27-3/4”
72”
GN91-200
199,900
91
80%
26-1/4”
76-5/16”
160
CXN250 100 (A)
250,000
100
80%
27-3/4”
72”
GN100-250(A)
250,000
100
80%
30-1/4”
73-1/4”
Conversion Charts
Lochinvar
Rheem-Ruud
ModelBtu/h
Gal. Efficiency* Dia.
Height
ModelBtu/h
Gas Tank Type – Atmospheric, Low NOx Emission Compliant Continued
CXN275 100 (A)
275,000
100
80%
27-3/4”
72”
GN100-270(A)
270,000
CXN365 085 (A)
366,000
85
80%
27-3/4”
73”
GN65-360(A)
360,000
CXN400 085 (A)
390,000
85
80%
27-3/4”
73”
GN100-400(A)
399,900
Gas Tank Type – Atmospheric, Ultra Low NOx Emission Compliant
UTN100 75
75,100
98
80%
27-3/4”
70-1/2”
G100UN
75,100
CLN120 080
120,000
81
82%
27-3/4”
68-1/4”
GNU75-125
125,000
CLN155 080
154,000
81
82%
27-3/4”
68-1/4”
GNU82-156
156,000
CLN180 100
180,000
93
82%
27-3/4”
76”
GNU76-200
199,900
CLN199 100
199,000
93
82%
27-3/4”
76”
GNU91-200
199,900
CLN250 100(A)
250,000
93
82%
27-3/4”
76”
GNU100-250(A)
250,000
CLN275 085(A)
275,000
85
82%
27-3/4”
76”
GNU100-270(A)
270,000
CLN366 085(A)
366,000
85
82%
27-3/4”
76”
GNU65-360(A)
360,000
CLN400 085(A)
399,000
85
82%
27-3/4”
76”
GNU100-400(A)
399,900
Gas Tank-Type – Power Direct Vented, Fully Condensing, Porcelain Coated Tank & External Heat Exchanger
SNR125-065
125,000
65
96%
28”
60-1/4”
GHE80-130(A)
130,000
SNR/SNA151-100
150,000
90
96%
28”
75-1/2”
GHE100-160(A)
160,000
SNR/SNA201-100
199,999
90
96%
28”
75-1/2”
GHE100-200(A)
199,900
SNA286-125
285,000
120
96%
34”
75-1/2”
GHE100-300(A)
300,000
SNA401-125
399,999
120
96%
34”
75-1/2”
GHE100-400(A)
300,000
SNA501-125
500,000
120
96%
34”
75-1/2”
GHE125-500A
500,000
*Based on ANSI Z21.10.3 Thermal Efficiency Test.
Gal.
Efficiency* Dia.
Height
100
65
100
80%
80%
80%
30-1/4”
26-1/4”
30-1/4”
73-7/8”
70-11/16”
76”
98
80%
27-1/8”
67-7/8”
75
80%
26-1/4”
65-1/2”
82
80%
26-1/4” 68-13/16”
76
80%
26-1/4” 68-13/16”
91
82%
26-1/4”
76-5/16”
100
80%
30-1/4”
73-1/4”
100
82%
30-1/4”
73-7/8”
65
80%
26-1/4” 70-11/16”
100
80%
30-1/4”
76”
80
97%
26-1/4”
69-5/8”
100
95%
26-1/4”
78-3/4”
100
95%
26-1/4”
78-3/4”
100
93%
26-1/4”
78-3/4”
100
92%
26-1/4”
78-3/4”
125
93%
32”
78-1/2”
Conversion Charts
161
Lochinvar
Model
Kw
Electric Tank-Type – Point-of-Use
EJW006FS
2.5 max
EJW010FS
6 max
EJW015FS
6 max
EJW020FS
6 max
Electric Tank-Type – Light Duty ESX 030KD
12 max
ESX 040KD
12 max
ESX 050KD
12 max
ETX 030KD
12 max
ETX 040KD
12 max
ETX 050KD
12 max
ETX 0650KD
12 max
ETX 080KD
12 max
ETX 120KD
12 max
Electric Tank-Type – Heavy Duty HS/HC 050
54 max
HS/HC 080
54 max
HS/HC 119
54 max
Gal.
Efficiency**
Dia.
Height
Rheem-Ruud
Model
6
98%
14-1/4”
15-1/2”
EGSP6
10
98%
18”
18-1/4”
EGSP10
15
98%
18”
26”
EGSP15
19
98%
21-3/4”
22-1/4”
EGSP20
30
98%
21-3/4”
31”
ELDS30
40
98%
24”
32-1/4”
ELDS40
50
98%
26-1/2”
32-1/4”
ELDS52
30
98%
20-1/2”
34-1/2”ELD30
40
98%
20-1/2”
45-1/4”
ELD40
50
98%
20-1/2”
55”
ELD52
66
98%
21-3/4”
60-3/4”
ELD66
80
98%
24”
59-1/2”
ELD80
119
98%
29-1/2”
62-1/2”
ELD120
50
98%
21-3/4”
55-3/4”
ES/E50
80
98%
25-1/2”
60-1/4”
ES/E85
119
98%
29-1/2”
62-1/4”
ES/E120
Kw
Gal.
Efficiency** Dia.
Height
6 max
6 max
6 max
6 max
6
10
15
19.9
98%
98%
98%
98%
15-3/4”
15-3/4”
24-1/4”
19-3/4”
15-1/8”
22-7/8”
17-3/4”
25-1/8”
12 max
12 max
12 max
12 max
12 max
12 max
12 max
12 max
12 max
30
40
50
30
40
50
66
80
119
98%
98%
98%
98%
98%
98%
98%
98%
98%
22-1/4”
23”
26-1/4”
17-3/4”
22-1/4”
22-1/4”
23”
24-1/2”
28-1/4”
29-1/2”
31-1/2”
32-1/2”
45-1/2”
46-1/4”
57”
58-3/4”
59”
62-1/2”
54 max
81 max
81 max
50
85
119
98%
98%
98%
26-1/4”
28-1/4”
30-1/4”
43-5/8”
57-11/16”
67-5/8”
Conversion Charts
**Accepted heat transfer efficiency of immersion heating elements.
162
State
Rheem-Ruud
ModelBtu/h
Gal. Efficiency* Dia.
Height
ModelBtu/h
Gal.
Efficiency* Dia.
Height
Gas Tank Type – Atmospheric
SBS65 65NE
65,000
65
n/a
24”
65”
G65-65
65,000
63
n/a
23”
65”
SBS75 76NE
75,000
75
n/a
26-1/2”
61-1/8”
G75-75N
75,100
75
n/a
26-1/4”
64”
SBS100 76NE
75,000
100
n/a
27-3/4”
68-5/8”
G100-80
80,000
98
80%
28-1/4”
69-5/8”
Gas Tank Type – Atmospheric Dampered
SBD71 120NE
120,000
71
80%
27-3/4”
69-3/4”
G75-125
125,000
75
80%
26-1/4”
65-1/2”
SBD81 154NE
154,000
81
80%
27-3/4”
73”
G82-156
156,000
82
80%
26-1/4” 68-13/16”
SBD81 180NE
180,000
81
80%
27-3/4”
67-1/2”
G76-180
180,000
76
80%
26-1/4” 68-13/16”
SBD100 199NET
199,000
100
80%
27-3/4”
75”
G91-200
199,900
91
80%
26-1/4”
76-5/8”
SBD100 199NE
199,000
100
80%
27-3/4”
75”
G91-200
199,900
91
80%
26-1/4”
76-5/8”
SBD81 199NE
190,000
81
80%
27-3/4”
67-1/2”
G76-200
199,900
76
80%
26-1/4” 68-13/16”
SBD100 199NES (A)
199,000
100
80%
30-1/4”
72’
G100-200(A)
199,900
100
80%
30-1/4”
73-1/16”
SBD100 250NE (A)
250,000
100
80%
30-1/4”
72”
G100-250(A)
250,000
100
80%
30-1/4”
73-1/4”
SBD65 251NE (A)
251,000
65
80%
27-3/4”
75”
G72-250(A)
250,000
72
80%
26-1/4”
71-1/16”
SBD100 275NE (A)
275,000
100
80%
30-1/4”
72”
G100-270(A)
270,000
100
80%
30-1/4”
73-7/8”
SBD65 305NE (A)
305,000
65
80%
27-3/4”
75”
G72-300(A)
300,000
72
80%
26-1/4”
71”
SBD85 365NE (A)
365,000
85
80%
27-3/4”
79-1/2”
G65-360(A)
360,000
65
80%
26-1/4” 70-11/16”
SBD100 390NE (A)
399,000
100
80%
30-1/4”
75-1/2”
G100-400(A)
399,900
100
80%
30-1/4”
76”
SBD85 500NE (A)
500,000
85
80%
27-3/4”
82-1/4”
GX90-550(A)
550,000
90
80%
30”
74-1/2”
Gas Tank Type – Atmospheric, Low NOx Emission Compliant
SBS75 76NE
75,000
75
n/a
26-1/2”
61-1/8”
G75-75N
75,100
75
n/a
26-1/4”
62”
SBS100 76NE
75,000
100
n/a
27-3/4”
68-5/8”
G100-80N
76,000
98
80%
28-1/4”
69-5/8”
SBN71 120NE
120,000
71
80%
27-3/4”
63”
GN75-125
125,000
75
80%
26-1/4”
65-1/2”
163
Conversion Charts
State
ModelBtu/h
Gal. Efficiency* Dia.
Gas Tank Type – Atmospheric, Low NOx Emission Compliant Continued
SBN81 154NE
154,000
81
80%
27-3/4”
SBN100 180NE
180,000
100
80%
27-3/4”
SBN95 199NE
199,000
93
82%
27-3/4”
SBN100 199NE
199,000
100
80%
27-3/4”
SBN100 199NES (A)
199,000
100
80%
27-3/4”
SBN100 200NES (A)
199,000
100
80%
30-1/4
SBN100 250NE (A)
250,000
100
80%
27-3/4”
SBN100 275NE (A)
275,000
100
80%
27-3/4”
SBN85 366NE (A)
366,000
85
80%
27-3/4”
SBN85 390NE (A)
390,000
85
80%
27-3/4”
Gas Tank Type – Atmospheric, Ultra Low NOx Emission Compliant
SBB75 76NE
75,100
74
80%
25-1/4”
SBL100 76NE
75,100
98
80%
27-3/4”
SBL81 120NE
120,000
81
82%
27-3/4”
SBL81 154NE
154,000
81
82%
27-3/4”
SBL95 180NE
180,000
93
82%
27-3/4”
SBL95 199NE
199,000
93
82%
27-3/4”
SBL95 250NE(A)
250,000
93
82%
27-3/4”
SBL85 275NE(A)
275,000
85
82%
27-3/4”
SBL85 366NE(A)
366,000
85
82%
27-3/4”
SBL85 390NE(A)
399,000
85
82%
27-3/4”
*Based on ANSI Z21.10.3 Thermal Efficiency Test.
Height
68”
72”
72”
72”
72”
72”
72”
72”
73”
73”
65-7/8”
70-1/2”
68-1/4”
68-1/4”
76”
76”
76”
76”
76”
76”
Rheem-Ruud
ModelBtu/h
Gal.
Efficiency* Dia.
Height
GN82-156
GN76-200
GN91-200
GN91-200
GN100-200(A)
GN100-200(A)
GN100-250(A)
GN100-270(A)
GN65-360(A)
GN100-400(A)
156,000
199,900
199,900
199,900
199,900
199,900
250,000
270,000
360,000
399,900
82
76
91
91
100
100
100
100
65
100
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
26-1/4”
26-1/4”
26-1/4”
26-1/4”
30-1/4”
30-1/4”
30-1/4”
30-1/4”
26-1/4”
30-1/4”
68-13/16”
68-13/16”
76-5/16”
76-5/16”
73-1/16”
73-1/16”
73-1/4”
73-7/8”
70-11/16”
76”
G75UN
G100UN
GNU75-125
GNU82-156
GNU76-200
GNU91-200
GNU100-250(A)
GNU100-270(A)
GNU65-360(A)
GNU100-400(A)
75,100
75,100
125,000
156,000
199,900
199,900
250,000
270,000
360,000
399,900
75
98
75
82
76
91
100
100
65
100
80%
80%
80%
80%
80%
82%
80%
82%
80%
80%
26-1/4”
27-1/8”
26-1/4”
26-1/4”
26-1/4”
26-1/4”
30-1/4”
30-1/4”
26-1/4”
30-1/4”
64-1/8”
67-7/8”
65-1/2”
68-13/16”
68-13/16”
76-5/16”
73-1/4”
73-7/8”
70-11/16”
76”
Conversion Charts
164
State
ModelBtu/h
Gal. Efficiency* Dia.
Gas Tank-Type – Power Direct Vented (2 pipe)
SDV75 70NE
70,000
75
n/a
26”
Gas Tank-Type – Power Direct Vented, Fully Condensing
SHE50 100NE
100,000
50
95%
22”
SUF60 120 NEA
120,000
60
95%
27-3/4”
SUF100 150 NEA
150,000
100
95%
27-3/4”
SUF100 199 NEA
199,000
100
95%
27-3/4”
SUF100 250 NEA
250,000
100
95%
27-3/4”
SUF130 300 NEA
300,000
130
96%
33-1/8”
SUF130 400 NEA
399,900
130
95%
33-1/8”
SUF130 500 NE
499,900
119
95%
33-1/8”
SUF130 500 NEA
499,900
130
95%
33-1/8”
Rheem-Ruud
Height
ModelBtu/h
Gal.
Efficiency* Dia.
Height
69-5/8”
66-3/4”
55-1/2”
75-1/2”
75-1/2”
75-1/2”
75-1/2”
75-1/2”
75-1/2”
75-1/2”
GPDV75-75
75,100
75
n/a
26-1/2”
70-3/8”
HE55-100
100,000
55
95%
23-1/2”
52”
HE55-130
130,000
55
95%
23-1/2”
52”
GHE100-160(A)
160,000
100
95%
26-1/4”
78-3/4”
GHE100-200(A)
199,900
100
95%
26-1/4”
78-3/4”
GHE100-250(A)
250,000
100
93%
26-1/4”
78-3/4”
GHE100-300(A)
300,000
100
93%
26-1/4”
78-3/4”
GHE100-400(A)
400,000
100
92%
26-1/4”
78-3/4”
GHE119-500
500,000
119
93%
32”
78-1/2”
GHE125-500A
500,000
125
93%
32”
78-1/2”
*Based on ANSI Z21.10.3 Thermal Efficiency Test.
State
Model
Kw
Electric Tank-Type – Point-of-Use
PCE 6 1OMSA
2.5 max
PCE 10 1OMSA
6 max
PCE 17 1OMSA
6 max
PCE 20 1OMSA
6 max
Rheem-Ruud
Gal.
Efficiency**
Dia.
Height
Model
6
10
15
19.9
98%
98%
98%
98%
14-1/4”
18”
18”
21-3/4”
15-1/2”
18-1/4”
26”
22-1/4”
EGSP6
EGSP10
EGSP15
EGSP20
Kw
Gal.
Efficiency** Dia.
Height
6 max
6 max
6 max
6 max
6
10
15
19.9
98%
98%
98%
98%
15-3/4”
15-3/4”
17-3/4”
19-3/4”
15-1/8”
22-7/8”
24-1/4”
25-1/8”
Conversion Charts
165
State
Model
Kw
Electric Tank-Type – Light Duty PCE 30 2OLSA
12 max
PCE 40 2OLSA
12 max
PCE 50 2OLSA
12 max
PCE 30 2ORTA
12 max
PCE 40 2ORTA
12 max
PCE 52 2ORTA
12 max
PCE 66 2ORTA
12 max
PCE 82 2ORTA
12 max
PCE 120 2ORTA
12 max
Electric Tank-Type – Heavy Duty CSB 52**SFE/IFE
54 max
CSB 82**SFE/IFE
54 max
CSB 120**SFE/IFE
54 max
SSE 10
6 max
SSE 20
18 max
SSE 30
24 max
SSE 40
36 max
SSE 50
90 max
SSE 65
90 max
SSE 80
90 max
SSE 100
90 max
SSE 120
90 max
Gal. Efficiency**
Dia.
Height
Model
30
98%
21-3/4”
30-7/8”
ELDS30
40
98%
24”
32-1/4”
ELDS40
50
98%
26-1/2”
32-1/4”
ELDS52
30
98%
20-1/2”
34-1/2”
ELD30
40
98%
20-1/2”
45-1/8”
ELD40
50
98%
20-1/2”
54-7/8”
ELD52
66
98%
21-3/4”
60-3/4”
ELD66
80
98%
24”
59-3/8”
ELD80
119
98%
29-3/8”
62-7/16”
ELD120
50
98%
21-3/4”
55-3/4”
ES/E50
80
98%
25-1/2”
60-1/4”
ES/E85
119
98%
29-1/2”
62-1/4”
ES/E120
10
98%
18-3/4”
26-1/4”
E12A
20
98%
20-1/2”
27-1/4”
E20A
30
98%
20-1/2”
35-3/4”
E30A
40
98%
20-1/2”
45-3/4”
E40A
50
98%
20-1/2”
54-3/4”
E50A
65
98%
26-1/2”
50-1/2”
E85A
80
98%
28”
49-1/4”
E85A
100
98%
28”
58-1/4”E120A
119
98%
30”
63-1/4”
E120A
**Accepted heat transfer efficiency of immersion heating elements.
Rheem-Ruud
Kw
Gal.
Efficiency** Dia.
Height
12 max
12 max
12 max
12 max
12 max
12 max
12 max
12 max
12 max
30
40
50
30
40
50
66
80
119
98%
98%
98%
98%
98%
98%
98%
98%
98%
22-1/4”
23”
26-1/4”
17-3/4”
22-1/4”
22-1/4”
23”
24-1/2”
28-1/4”
29-1/2”
31-1/2”
32-1/2”
45-1/2”
46-1/4”
57”
58-3/4”
59”
62-1/2”
54 max
81 max
81 max
9 max
18 max
36 max
36 max
54 max
81 max
81 max
81 max
81 max
50
85
119
13
20
30
40
50
85
85
119
119
98%
98%
98%
98%
98%
98%
98%
98%
98%
98%
98%
98%
26-1/4”
28-1/4”
30-1/4”
19”
19”
19”
21”
26-1/4”
28-1/4”
28-1/4”
30-1/4”
30-1/4”
43-5/8”
57-11/16”
67-5/8”
28-1/2”
36-1/2”
49-1/4”
53-3/4”
43-5/8”
57-11/16”
57-11/16”
67-5/8”
67-5/8”
Conversion Charts
166
Notes
Miscellaneous
167
Effective April 2015
Rheem Water Heating
101 Bell Road, Montgomery, Alabama 36117-4305
Rheem manufactures residential and commercial heating
and cooling and water heating products.
In keeping with its policy of continuous progress and product improvement,
Rheem reserves the right to make changes without notice.
Residential and Commercial
Water Heaters
PRINTED IN U.S.A.
03/15 WP
FORM NO. RH-PG Rev. 4
POCKET GUIDE
Division Office 334.260.1500
Customer Service, Warranty & Parts 1.800.621.5622
Fax 1.800.535.9538
Technical Service 1.800.432.8373 (1.800.HEATER3)
Technical Service for Heat Pump Water Heaters 1.800.995.0982
Email sales@rheem.com
Rheem.com
Download PDF