Color Variants AI230700 Stainless Steel Width 39 6/16'

AI230700
200 series island hood
Stainless Steel
Width 39 6/16'' (100 cm)
Air extraction/recirculation
Standard duct cover and mounting kit
inlcuded
Color Variants
AI230700
Stainless Steel
Width 39 6/16'' (100 cm)
Optional accessories
AA200110
Active charcoal filter for retrofitting air
recirculation module AA 200 812/816
AA200816
Recirculation module with activated
charcoal filter
Installation Accessories
AD200326
Stainless steel duct cover extension
Length: 3' 3 3/8"
Classic Gaggenau design
Highly efficient extraction of cooking
vapors
Low-noise blower
Patented filter technology with high
level of grease absorption
Rim extraction filter with flat and
easy-to-clean stainless steel surface
Dimmable LED light for optimum
illumination of the entire cooktop
Air extraction or recirculation system
Recirculation module with activated
charcoal filters: quiet and highly
efficient recirculation solution with
odor reduction as in air extraction
mode, and long replacement
intervals
Output
Air extraction:
641 / 790 m³/h.
Air recirculation:
535 / 574 m³/h.
Odor reduction recirculation 95%.
Features
Three electronically controlled power
levels and an intensive mode.
Grease filter saturation indication by
flashing light
Patented rim extraction filter,
dishwasher-safe.
Warm white LED light (3600 K),
continuously dimmable.
Airflow-optimized interior for efficient
air circulation.
Easy mounting system for simple
installation and alignment.
The package includes an one-way flap.
Planning notes
The hood includes a two-part duct
cover with the dimensions from 654
mm to 834 mm. Individual planning
solutions can be accomodated using
the optional duct cover accessory AD
200 322 or by shortening the lower
edge of the telescopic duct cover.
Minimum clearance above gas cooktop
76 cm (30 inches). For more than
40.000 BTU min. 70 cm (27 inches).
Clearance above electric appliances
min. 30".
The recirculation module with activated
charcoal filter can be installed on the
inside of the duct cover.
When installing a ventilation hood with
air extraction mode and a chimneyvented fireplace, the hood's power
supply line needs a suitable safety
switch.
Rating
Total rating: 430 W.
Total Amps: 3 A.
110 - 127 V / 60 Hz
Connecting cable 51 3/16'' with plug.
Product Features
Operating Mode
Convertable: Ducted / Recirculating
Number of speed settings
3-stage
Delay Shut off modes
3/5/10
Silence level (dBA)
Required accessories
Optional accessories
AA200110, AA200816
Number of lights
4
Type of lamps used
LED
Total power of the lamps (W)
20
Grease filter material
Not washable synthetic
Grease filter type
Multilayer
Clean filter reminders
Consumption and connection features
UPC code
825225907657
Material
Stainless steel
Watts (W)
430
Current (A)
3
Volts (V)
110-127
Frequency (Hz)
60
Approval certificates
ETL
Power Cord Length
51 3/16''
Plug type
120V-3 prong
Overall appliance dimensions (HxWxD)
(in)
29 5/16'' - 36 6/16'' / x 39 6/16'' x 25
9/16''
Product packaging dimensions
(HxWxD) (in)
34.84 x 24.01 x 52.16
Height of the chimney (in)
25 12/16'' - 32 13/16''
Vertical rise height
Required distance above cooktop/
ranges
30''/30''
Net weight (lbs)
85
Gross weight (lbs)
108
Adjustable feet
Motor location
Integrated motor in hood chimney
Maximum CFM
Diameter of air duct (in) top
6
Diameter of air duct (in) back
Discharge direction
No-return airflow flap
Yes
2015-03-24
Page 1
AI230700
200 series island hood
Stainless Steel
Width 39 6/16'' (100 cm)
Air extraction/recirculation
Standard duct cover and mounting kit
inlcuded
2015-03-24
Page 2
Download PDF
Similar pages