Catalog # :
Project :
Prepared By :
Date :
Alliance 2’ - ALI2
LED 2’ Linear High Bay
The new Alliance™ indoor LED high bay
was designed to provide flexibility on any
project. For use with applications ranging
from school gymnasiums to industrial
facilities, the Alliance is configurable with
lumen packages that target DLC Premium,
a variety of distribution patterns & lenses,
and flexible control options. The original
design features optional end caps that lend
a unique, customized look to your project.
Shown with decorative end caps accessory
Features & Specifications
ARRA
Funding Compliant
Optical System
•Optional high transmission impact resistant clear lenses available in
Acrylic (CAL) or Polycarbonate (CAP).
•Optional diffuse impact resistant Acrylic (DA) lens available to eliminate bright
spots from individual LED’s and provide high vertical illumination and visual
comfort.
•Less Lens (LL) option available for high efficiency applications.
•Use of closely spaced medium-power, high brightness chips provide uniform
lens luminance with no dead spots.
•Choice of 2 high performance distributions; Wide (W), or Narrow / Aisle (N).
Narrow / Aisle distribution is available with Less lens (LL), Clear Acrylic (CA),
and Clear Polycarbonate (CP) lens options only.
•Available in 5000K, 4000K and 3500K color temperatures.
•Minimum CRI of 80. Optional 90 CRI available, consult factory for lead times.
Dimensions
OPTIONAL
DECORATIVE
END CAPS
OPTIONAL WIRELESS
CONTROLS ANTENNA
3.6
2.9
OPTIONAL INTEGRAL
IMSO SENSOR
24.6
26.4
Electrical
•High-performance driver features over-voltage, under voltage, short-circuit and
over temperature protection.
•0-10 volt dimming (5% - 100%) standard.
•Standard Universal Voltage (120-277 Vac) Input 50/60 Hz or optional High
Voltage (347-480 Vac).
•L80 Calculated Life: >100k Hours (See Lumen Maintenance on Page 2)
•Total harmonic distortion: <20%
•Operating temperature: -40°C to +55°C (-40°F to +131°F), 30°C (86°F) when
equipped with EM option.
• Power factor: >.95
•Input power stays constant over life.
•Optional 120v-277v integral emergency battery pack is available to meet critical
life safety lighting requirements. The 90-minute batteries provide constant
power to the LED system, ensuring code compliance. A test switch/indicator
button is installed on the housing for ease of maintenance.
•Field replaceable surge protection device meets a minimum Category C Low
operation (per ANSI/IEEE C62.41.2).
12.4
11.9
OPTIONAL WIRELESS
CONTROLS ANTENNA
ACCESS
PLATE
2.7
6.3
0.875 K.O.
3.6
ACCESS
PLATE
11.9
0.875 K.O.
7.2
3.6
2.9
11.9
LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 • www.lsi-industries.com • (513) 372-3200 • ©LSI Industries Inc. All Rights Reserved.
12.4
Alliance 2’ - ALI2
LED 2’ Linear High Bay
Features & Specifications (Cont.)
LUMENS*
LED
Gen
LEDHE
LEDHE
LEDHE
Controls
ELECTRICAL DATA*
5000Kactivate
•Optional integral passive infrared3500K
motion sensors4000K
and daylight sensors
Distribution
Delivered
Lumen
Lens
switching
of luminaire
lightDelivered
levels (see pageDelivered
5 for more details).
Type
Lumens Efficacy Lumens Efficacy
Lumens Efficacy Wattage
Package
Type
•LSI’s AirLink™
wireless
control
system150options
reduce153
energy and
maintenance
W
LL
9073
9258
9408
154
costs while optimizing light quality 24/7. (see page 6 for more details)
CA
8669
144
8847
146
9024
149
•Osram Encellium™ Wireless Networked Light Management System options.
CP
8301
138
8473
140
8642
143
(see page 6 for more details)
09L
DA
N
Construction
LL
7597
8299
125
138
7789
8543
128
141
7945
8815
131
61
145
CA
7967 housing
132 for consistency
8231
136 and strength
8462
139
•Rigid extruded aluminum
optical
with
CPas a heat
7635sink and
127 resist7915
131
vertical fins that serve
accumulation
of8110
dust and133
debris.
W
LL
12245
146
12538
149
12789
152
•Thick gauge die formed steel driver housing and access panel.
CA
140
143
146
•Access panel provides
single11755
screw access
to12036
wiring and
driver12277
connections.
CP
11265
134
11535
137
11766
•Optional injection molded decorative endcaps offer a more customized 140
DA
10408
124
10657
127
10870
129
12L
84
specifiable apperance.
N
LL
11183
134
11575
138
11807
141
•Luminaire is proudly made in the U.S.
CA
10713
128
11112
132
11334
135
•All metal parts are painted after fabrication following treatment with phosphate
10310
123reflecting
10649surfaces
127 is with
10862
rust inhibitor. Finish CP
coating of
housing
high- 129
W
LL
14778
151
15166
154
15469
157
reflectance white
(minimum
92%) polyester
powder.
CA
14187
145
14559
148
14851
151
•The
15L Alliance makes it possible to meet ESFR fire suppression system
99
1359612.4’’139
142
14232
145
requirements due toCP
the fixtures
width. 13953
DA in carton.
12561
128
12891
131
13149
134
•Shipping weight: 11lbs
W
Installation
LEDSE
Performance
LL
14441
142
14860
145
15157
148
CA
13863
136
14266
139
14551
142
•Mounting options include;
Hook
Hangers
(HCH10),
CP
13286Cable131
13671
133 Pendant
13945Mount
136(PM),
Single
Hub/Cable
Mount
(SHC),
and
Surface
Mount
(SMK).
DA
12275
121
12631
123
12884
126
15L
102
Warranty
N
LL
13248
130
13764
135
14039
138
CA
12718
125
13213
130
13478
132
•LSI LED Fixtures carry a 5-year warranty.
CP
12188
120
12663
124
12916
127
•1 Year warranty
on optional
Battery
Back
Up. 18155
Test regularly
in accordance
with
W
LL
17692
146
149
18518
152
local codes
LEDHE
LEDHE
LEDSE
18L
Listings
CA
16984
140
17429
143
17777
146
CP
16277
134
16703
137
17037
140
DA
15038
124
15432
127
15740
129
•Listed to UL 1598 and UL 8750.
W
LL
23616
141
24356
145
24843
•RoHS Compliant.
CA
22671
135
23382
139
23849
•State
24L of California Title 24.
CP
21727
130
22408
133
22856
•American Recovery and Reinvestment Act Funding Compliant.
DA
20074
120
20703
123
21117
•Lighting Facts Approved.
W
LL
27660
137
28341
140
28908
•Suitable For Damp Locations.
CA
26554
132
27207
134
27752
30L
122
148
142
136
168
126
143
137
CP
25447
126
26074
129
26595
131
DA
23511
116
24090
119
24572
121
Lumens
120V
208V
240V
277V
347V
480V
09L
0.508
0.293
0.254
0.220
0.176
0.127
12L
0.700
0.404
0.350
0.303
0.242
0.175
15L (SE)
0.850
0.490
0.425
0.368
0.294
0.213
15L (HE)
0.825
0.476
0.413
0.357
0.285
0.206
18L
1.017
0.587
0.508
0.440
0.352
0.254
24L
1.400
0.808
0.700
0.606
0.484
0.350
30L (SE)
1.692
0.976
0.846
0.733
0.585
0.423
*Electrical data at 25C (77F). Actual wattage may differ by +/-10%.
HIGH EFFICIENCY LED GEN- RECOMMENDED LUMEN MAINTENANCE1
Ambient
Temperature
C
25
0 hrs.2
100.29
Lumen Multiplier
30
100.29
94.80
89.60
84.69
80.05
35
100.29
94.80
89.60
84.69
80.05
40
100.21
94.16
88.47
83.13
78.11
45
100.21
94.16
88.47
83.13
78.11
50
100.21
94.16
88.47
83.13
78.11
25K hrs.2
94.80
50K hrs.2
89.60
75K hrs.3
84.69
100K hrs.3
80.05
1 - Lumen maintenance values at 25˚C are calculated per TM-21 based on LM-80 data and
in-situ luminaire testing.
2 - In accordance with IESNA TM-21-11, Projected Values represent interpolated value based
on time durations that are within six times (6X)the IESNA LM-80-08 total test duration (in
hours) for the device under testing ((DUT) i.e. the packaged LED chip).
3 - In accordance with IESNA TM-21-11, Calculated Values represent time durations that
exceed six times NA LM-80-08 total test duration (in hours) for the device under testing
((DUT) i.e. the packaged LED chip).
STANDARD EFFICIENCY LED GEN- RECOMMENDED LUMEN MAINTENANCE1
Ambient
Temperature
C
25
0 hrs.2
100.29
Lumen Multiplier
30
100.29
94.80
89.60
84.69
80.05
35
100.21
94.16
88.47
83.13
78.11
40
100.21
94.16
88.47
83.13
78.11
45
100.21
94.16
88.47
83.13
78.11
50
100.21
94.16
88.47
83.13
78.11
25K hrs.2
94.80
50K hrs.2
89.60
75K hrs.3
84.69
100K hrs.3
80.05
1 - Lumen maintenance values at 25˚C are calculated per TM-21 based on LM-80 data and
in-situ luminaire testing.
2 - In accordance with IESNA TM-21-11, Projected Values represent interpolated value based
on time durations that are within six times (6X)the IESNA LM-80-08 total test duration (in
hours) for the device under testing ((DUT) i.e. the packaged LED chip).
3 - In accordance with IESNA TM-21-11, Calculated Values represent time durations that
exceed six times NA LM-80-08 total test duration (in hours) for the device under testing
((DUT) i.e. the packaged LED chip).
203
*LED Chips are frequently updated therefore values are nominal.
LUMENS*
LED
Gen
LEDHE
Lumen
Package
Distribution
Type
W
09L
N
Lens
Type
3500K
4000K
Delivered
Delivered
Lumens Efficacy Lumens Efficacy
5000K
Delivered
Lumens Efficacy Wattage
LL
9095
154
9286
157
9632
163
CA
8780
149
8941
151
9299
157
CP
8410
143
8554
145
8896
151
DA
7736
131
7895
134
8211
139
LL
8561
145
8726
147
9054
153
CA
8219
139
8377
141
8692
147
CP
7876
133
8028
135
8330
141
LL
12453
153
12728
156
13237
162
ELECTRICAL DATA*
59
Lumens
120V
208V
240V
277V
347V
480V
09L
0.492
0.284
0.246
0.213
0.170
0.123
12L
0.683
0.394
0.342
0.296
0.236
0.171
15L
0.825
0.476
0.413
0.357
0.285
0.206
0.352
0.254
11/29/17
0.484
0.350
LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 • www.lsi-industries.com • (513) 372-3200
• ©LSI
Industries
Inc. All Rights
18L
1.017
0.587
0.508 Reserved.
0.440
W
24L
1.400
0.808
0.700
0.606
Alliance 2’ - ALI2
LED 2’ Linear High Bay
Luminaire Ordering Guide
ALI2 LEDHE 24L CA W UNV DIM 40 ALSCS
TYPICAL ORDER EXAMPLE:
Family /
Size
LED
Gen
ALI2 - 2’ Linear
High Bay
Lumen
Package*
LEDHE -
09L - 9000
High Efficiency
12L - 12000
Lens
LL - Less Lens
CA - Clear Acrylic
15L - 150009, 4
LEDSE - Standard
18L - 180008
Efficiency4
24L - 240008
Distribution
W - Wide
N - Narrow / Aisle7
Color
Temperature
CRI
UNV -
DIM - Dims to 5%
35 - 3500K
Blank - 80 CRI
120-277V
(0 to 10V dimming)
40 - 4000K
50 - 5000K
90CRI - 90 CRI1, 7
HV -
CP - Clear polycarbonate
347-480V
DA - Diffused Acrylic8
30L - 300008, 13, 4
Driver
Voltage
*Consult factory for
programmable wattages
and lumen packages.
Controls
EM Options
Blank - (No Controls)
Options
EM - 10 Watt Emergency Backup11
EM20 - 20 Watt Emergency Backup11, 14
ALSC - Airlink Synapse Wireless Control System
6
BLANK - Standard End Leads
CLDS - Center Leads7, 2
Packaging
Blank - None
JP - Job Pack
E6C - 6ft cord 16/5 no plug Cord installed at END
E10C - 10ft cord 16/5 no plug Cord installed at END
E15C - 15ft cord 16/5 no plug Cord installed at END
E20C - 20ft cord 16/5 no plug Cord installed at END
C6C - 6ft cord 16/5 no plug Cord installed at CENTER2
C10C - 10ft cord 16/5 no plug Cord installed at CENTER2
C15C - 15ft cord 16/5 no plug Cord installed at CENTER2
C20C - 20ft cord 16/5 no plug Cord installed at CENTER2
ALSCS - Airlink Synapse Wireless Control System with Sensor6
IMS0M2 -Integral Motion / Daylight Sensor. Mounting Height >20’5, 6
IMS0M4 -Integral Motion / Daylight Sensor. Mounting Height >45’5, 6
OCSUE - Occupancy Sensor 120-347V12
OCSHV - Occupancy Sensor 480V12
515P - 5-15P plug only (120V)6,10
L515P - 5-15P Twistlock Plug (125V)6,10
L615P - 6-15P Twistlock Plug only (250V)6,10
L715P -7-15P twistlock Plug only (277V)6,10
L820P - 8-20P twistlock Plug only (480V)10
L2420P - 24-20P Twistlock Plug only (347V)10
DHSUE - Daylight Harvesting / Occupancy Sensor 120-277V12 DHSHV
- Daylight Harvesting / Occupancy Sensor 347-480V
12
ENC - Encelium Wireless Control System6, 7
ENCS - Encelium Wireless Control System with Sensor6, 7
RL15___ - Reloc 15’ Cord (Must Specify Voltage)7
RL20___ - Reloc 20’ Cord (Must Specify Voltage)7
MP__ - Modular Plug (Must Specify Voltage)7
Accessory Ordering Information
Description
Order Number
PM2, 3 - Pendant Mount J-Box Kit
672404
SHC2 - Single Hub / Chain Mount
572488
HCH10 -10' Hook Cable Hanger (Pair)
460149
SMK2 - Surface Mount Kit
672405
IMS2
584929
Remote
EC - Decorative End Caps (Pair)
679282
WG ALI2 DECORATIVE END - Wireguard when using decorative end-caps
671328
WG ALI2 DECORATIVE END IMSO - Wireguard when using decorative end-caps and
integral Occupancy Sensor.
671328-1
WG ALI2 - Wireguard w/out decorative end-caps
679474
WG ALI2 IMSO - Wireguard w/out decorative end-caps and Integral Occupancy Sensor
679474-1
FOOTNOTES:
1 - Not available with DLC qualification. Consult with Factory.
2 - Center leads and Center cords option requires pendant mount “PM” accessory
(Part Number 572484)
3 - Pendant mount option provides wiring box with 3/4’’ threaded hub for housing connections
and attaching stems. Stems must be ordered as a separate line item accessory. LDS (Center
leads) requires pendant mount “PM” accessory
4 - Only available in 15L & 30L lumen packages with LEDSE option
5 - IMS Remote allows you to configure your settings on the IMS Integral motion/ daylight
sensor. See Accessories for ordering information.
6 - Not Available in HV. Consult with Factory.
7 - Consult factory for Leadtime
8 - Not available in Aisle Distribution
9 - Not available in High Efficacy (LEDHE) with Aisle Distribution (N)
10 - Comes Standard with 6’ cord unless specified with cord/no plug option
(E6C,E10C,E15C,E20C,C6C,C10C,C15C,C20C).
11 - Internal EM only available from 9,000L to 15,000L. All other configurations will be external
mounted.
12- Not Available with Decorative End Caps
13- Not Available with LEDHE
14- Step-Down transformer added when using HV
LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 • www.lsi-industries.com • (513) 372-3200 • ©LSI Industries Inc. All Rights Reserved.
Alliance 2’- ALI2
LED 2’ Linear High Bay
Performance (Cont.)
DELIVERED LUMENS*
LED
Gen
ELECTRICAL DATA*
Lumen
Package
Distribution
Type
W
LEDHE
09L
N
Lens
Type
LEDHE
12L
N
W
ALI2
LEDHE
15L
W
LEDSE
15L
N
W
LEDHE
18L
W
LEDHE
24L
W
LEDSE
30L
5000K
Delivered
Lumens Efficacy Wattage
LL
9073
150
9258
153
9408
154
CA
8669
144
8847
146
9024
149
CP
8301
138
8473
140
8642
143
DA
7597
125
7789
128
7945
131
LL
CA
W
3500K
4000K
Delivered
Delivered
Lumens Efficacy Lumens Efficacy
8299
138
8543
8231
141
136
8815
8462
61
145
7967
132
139
CP
7635
127
7915
131
8110
133
LL
12245
146
12538
149
12789
152
CA
11755
140
12036
143
12277
146
Lumens
120V
208V
240V
09L
0.508
0.293
0.254
12L
0.700
0.404
0.350
15L (SE)
0.850
0.490
0.425
15L (HE)
0.825
0.476
0.413
18L
1.017
0.587
0.508
24L
1.400
0.808
0.700
30L (SE)
1.692
0.976
0.846
*Electrical data at 25C (77F). Actual wattage may differ b
HIGH EFFICIENCY LED GEN- RECOMMENDED L
Ambient
Temperature
C
25
0 hrs.2
100.29
Lumen M
25K hrs.2
94.80
50K
89.6
CP
11265
134
11535
137
11766
140
DA
10408
124
10657
127
10870
129
30
100.29
94.80
89.6
LL
11183
134
11575
138
11807
141
35
100.29
94.80
89.6
CA
10713
128
11112
132
11334
135
40
100.21
94.16
88.4
CP
10310
123
10649
127
10862
129
45
100.21
94.16
88.4
LL
14778
151
15166
154
15469
157
50
100.21
94.16
88.4
CA
14187
145
14559
148
14851
151
CP
13596
139
13953
142
14232
145
DA
12561
128
12891
131
13149
134
LL
14441
142
14860
145
15157
148
CA
13863
136
14266
139
14551
142
CP
13286
131
13671
133
13945
136
DA
12275
121
12631
123
12884
126
LL
13248
130
13764
135
14039
138
CA
12718
125
13213
130
13478
132
CP
12188
120
12663
124
12916
LL
17692
146
18155
149
18518
CA
16984
140
17429
143
CP
16277
134
16703
DA
15038
124
LL
23616
CA
CP
84
99
102
1 - Lumen maintenance values at 25˚C are calculated per
in-situ luminaire testing.
2 - In accordance with IESNA TM-21-11, Projected Value
on time durations that are within six times (6X)the IESNA
hours) for the device under testing ((DUT) i.e. the packa
3 - In accordance with IESNA TM-21-11, Calculated Valu
exceed six times NA LM-80-08 total test duration (in hou
((DUT) i.e. the packaged LED chip).
STANDARD EFFICIENCY LED GEN- RECOMMEN
Ambient
Temperature
C
25
0 hrs.2
100.29
127
30
100.29
94.80
89.6
152
35
100.21
94.16
88.4
17777
146
40
100.21
94.16
88.4
137
17037
140
45
100.21
94.16
88.4
15432
127
15740
129
50
100.21
94.16
88.4
141
24356
145
24843
148
22671
135
23382
139
23849
142
21727
130
22408
133
22856
136
DA
20074
120
20703
123
21117
126
LL
27660
137
28341
140
28908
143
CA
26554
132
27207
134
27752
137
CP
25447
126
26074
129
26595
131
DA
23511
116
24090
119
24572
121
122
168
Lumen M
25K hrs.2
94.80
1 - Lumen maintenance values at 25˚C are calculated pe
in-situ luminaire testing.
2 - In accordance with IESNA TM-21-11, Projected Valu
on time durations that are within six times (6X)the IESN
hours) for the device under testing ((DUT) i.e. the packa
3 - In accordance with IESNA TM-21-11, Calculated Valu
exceed six times NA LM-80-08 total test duration (in ho
((DUT) i.e. the packaged LED chip).
203
*LED Chips are frequently updated therefore values are nominal.
DELIVERED LUMENS*
LED
Gen
Lumen
Package
Distribution
Type
W
LEDHE
09L
N
W
LEDHE
12L
Lens
Type
3500K
4000K
Delivered
Delivered
Lumens Efficacy Lumens Efficacy
5000K
Delivered
Lumens Efficacy Wattage
LL
9095
154
9286
157
9632
163
CA
8780
149
8941
151
9299
157
CP
8410
143
8554
145
8896
151
DA
7736
131
7895
134
8211
139
LL
8561
145
8726
147
9054
153
CA
8219
139
8377
141
8692
147
CP
7876
133
8028
135
8330
141
LL
12453
153
12728
156
13237
162
CA
11955
147
12219
150
12708
156
CP
11457
141
11710
144
12178
149
DA
10585
130
10819
133
11252
138
ELECTRICAL DATA*
59
82
Lumens
120V
208V
240V
09L
0.492
0.284
0.246
12L
0.683
0.394
0.342
15L
0.825
0.476
0.413
18L
1.017
0.587
0.508
24L
1.400
0.808
0.700
30L
1.642
0.947
0.821
36L
2.025
1.168
1.013
48L
2.792
1.611
1.396
60L
3.492
2.014
1.746
LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 • www.lsi-industries.com
• (513) 372-3200
• ©LSI Industries
Inc. All153
Rights Reserved.
N
LL
11692
144
11956
147
12443
CA
11228
138
11478
141
11945
146
50K
89.6
11/29/17
Alliance 2’ - ALI2
LED 2’ Linear High Bay
Controls
Occupancy Sensor / Daylight Sensor (IMSO)
IMS/PC Remote Configurator Tool
• Optional integral passive infrared motion and daylight sensor activates
switching of luminaire light levels. Standard Factory settings: High level
light is activated and increased to full bright upon detection of motion. Low
light level (30% maximum drive current) is activated when target zone is
absent of motion activity for ~5 minutes. See coverage diagram for detection cone. Optional configurator tool allows for easy and safe programming
of each luminaire from the ground level.
OPTIONAL IMS COVERAGE
OPTIONALDIAGRAM
IMS COVERAGE DIAGRAM
IMS0M2 Coverage Diagram
SIDE VIEW
SIDE VIEW
0'
IMS0M4 Coverage Diagram
SIDE VIEW
SIDE VIEW
0
0
27'
27'
0'
5'
5'
10'
10'
15'
15'
20'
20'
20'
18'
15'
12' 9'
TOP VIEW
40'
62'0 ' 31'8 ' 015'
' 3 '1 2 ' 6 '9 ' 9 '6 ' 12' 3 ' 15'0 ' 18'3 ' 20'6 '
9'
12'
20'
20'
10'
10'
0'
0'
10'
10'
20'
10'
0'
20'
40'
20'10'
10'20'
0'
40'
10'
15'
40'
18'
TOP VIEW
TOP VIEW
20'
40'
50'
20'
20'
30'
20' 50'
10' 40'0
040' 10'
50' 20'
30'
40'
TOP VIEW
50'
50'
25'
25'
0
0
25'
25'
50'
30'
10' 20'
20' 10'
30'
25'
50'
100'
0
25'
25'
0
100'
25'
Occupancy Sensor (OCSUE/OCSHV)
• Optional integral passive infrared motion activates switching of luminaire
on/off. Standard Factory settings: Luminaire is activated and increased to
full bright upon detection of motion. Luminaire powers off when target
zone is absent of motion activity for ~5 minutes. See coverage diagram for
detection cone. Not available with decorative endcap accessory.
Occupancy Sensor / Daylight Sensor (DHSUE/DHSHV)
• Optional integral passive infrared motion and daylight sensor activates
switching of luminaire on/off. Standard Factory settings: Luminaire is
activated and increased to full bright upon detection of motion. Luminaire
powers off when target zone is absent of motion activity for ~5 minutes.
See coverage diagram for detection cone. Not available with decorative
endcap accessory.
LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 • www.lsi-industries.com • (513) 372-3200 • ©LSI Industries Inc. All Rights Reserved.
50'
Alliance 2’- ALI2
LED 2’ Linear High Bay
Controls (Cont.)
To get the most value from LSI Industries smart fixtures, we recommend OSRAM ENCELIUM, the industry’s leading Light Management System. ENCELIUM
brings together the hardware, software you need to control your entire lighting system, all from a single control pane. The Polaris 3D® software is the core
element of the ENCELIUM Networked Light Management System. It facilitates the commissioning, usage, and data analysis of the lighting installation.
Learn more what OSRAM ENCELIUM can do for you at www.osram.us/encelium
OSRAM Wireless Control Module (ENC/ENCS)
Include the ENC/ENCS in to enable each LED driver to be independently controlled and configured via OSRAM ENCELIUM®. The ENC/ENCS devices are
Damp-Rated and enables luminaires to be turned ON or OFF via a relay contained in the module as well as delivers a low voltage dimming signal to any 0-10V
dimming driver.
• Class 1 / Class 2 0-10V Dimming Control
enabled by Synapse
®
Class Connect
1 / Classup
2 0-10V
•• Direct
to twoDimming
(2) to 24VControl
Occupancy Sensors and
Photocells
(consult
sales
for
compatible
list)
• Direct Connect up to two (2) to 24V Occupancy
Sensors and
Photocells
(consult upgrades
sales for compatible
list) enhancements
• Secure,
over-the-air
to support future
Wireless Lighting Controller (ALC/ALCS)
Secure, over-the-air
to support
future
enhancements
•• Excellent
RF Range —upgrades
1,000ft LoS
between
controllers
Specifications
The AirLink integrated controller is a California Title 24 compliant lighting controller that provides real-time light monitoring and control with
utility-grade power monitoring. It includes a 24V sensor input and power
supply to connect up to two (2) sensors into the outdoor AirLink wireless
lighting system.
Regulatory
Approvals
Excellent
— 1,000ft
LoS
between
controllers
•• Available
inRFa Range
metal cased
version
with
quick connect
• FCC, IC,terminal
CE certified
blocks
• Available in a metal cased version with quick connect
• cULus Listed
Features
Power and Performance
Specifications
• Operating
environmental:
-40°F to 131°F (-40°C to 55°C)
Regulatory
Approvals
• InputRegulatory
power: 100–277 VAC +/- 10% (Max 305V)47/64 Hz
• FCC, IC, CEApprovals
certified
• Switched output: Default ON; Zero Cross Switching
FCC,5A
IC,
certified
cULus
Listed
• Load••rating:
@CE100V
to 277V (+/- 10%)
• Dimming:
0–10V
control;
Class 1/2 - 20mA Source Max / 50mA
cULus
Listed
•• California
Title 24 Output:
compliant
Sink Max
• California
Title 24 compliant
Power
and Performance
• Power
monitoring:
Utility grade - 2% accuracy
• Sensors
inputs:
(photocell sensors),
0–24V (-40°C
(all other
and0–10V
Performance
•Power
Operating
environmental:
-40°F to 131°F
to sensors);
55°C)
Sensor power supply: 24VDC @ 50mA
•
•
•
•
2% Utility Grade Power Monitoring
Up to 80% Savings through smart dimming
True On/Off functionality via switched relay
Seamlessly integrates into the outdoor AirLink wireless lighting control
solution & Self-healing Mesh Networking
Wireless Lighting Controller
• Relay closes on power loss
Wireless
Lighting
Controller
AirLinkaintegrated
is a California
Title 24 compliant lighting
•The
Supports
wide rangecontroller
of
LED drivers
and fixtures
controller
that
provides
real-time
light
monitoring
and24control
withlighting
• The
Class
1 / Class
2 0-10Vcontroller
Dimming is
Control
AirLink
integrated
a California Title
compliant
utility-grade
power
monitoring.
It
includes
a
24V
sensor
input
and
• controller
Direct Connect
up to tworeal-time
(2) to 24V
Occupancy
Sensors
and Photocells
that provides
light
monitoring
and control
withpower
supply
to
connect
up
to
two
(2)
sensors
into
the
outdoor
AirLink
wireless
(consult
sales
for
compatible
list)
utility-grade power monitoring. It includes a 24V sensor input and
power
system.
•lighting
Secure,
over-the-air
upgrades
to
support
future
enhancements
supply to connect up to two (2) sensors into the outdoor AirLink wireless
• lighting
Excellent
RF Range — 1,000ft LoS between controllers
system.
The wireless
integrated controller and twist lock controller are compatible
• Lights default to on for safety
with
fixture.
The this
wireless
integrated controller and twist lock controller are compatible
with this fixture.
Sales
controls.sales
@lsi-industries.com
• Up to 80% Savings
through
smart dimming
• Lights default to on for safety
Specifications
Operating
environmental:
to 131°F
to 55°C)
•• Input
power:
100–277 VAC-40°F
+/- 10%
(Max (-40°C
305V)47/64
Hz
Other
Input 2.4
power:
100–277
10%
(MaxSwitching
305V)47/64
Hz
•• Switched
output:
DefaultVAC
ON;+/Zero
Cross
• Radio:
SNAP
GHz;
802.15.4;
+20
dBm
Transmit
Power;
-105 dBm
Receive
Sensitivity
Switched
output:
Zero
•• Load
rating:
5A @ Default
100V toON;
277V
(+/-Cross
10%)Switching
• Warranty: 5 years
Load rating:
5A @control;
100V to
277V (+/•• Dimming:
0–10V
Output:
Class10%)
1/2 - 20mA Source
Max
/
50mA
Sink
Max
• Dimming: 0–10V control; Output: Class 1/2 - 20mA Source
Max / 50mA Sink Max
Contact LSI Controls
Features
• 2% Utility Grade Power Monitoring
terminal
blocks
• Lights
default
to on for safety
• California Title 24 compliant
• Power monitoring: Utility grade - 2% accuracy
• Sensors inputs: 0–10V (photocell
sensors), 0–24V (all other
Support
More information
controls.support@lsi-industries.com
sensors); Sensor powerFor
supply:
@ 50mA
more 24VDC
information
on AirLink, visit our
website at www.lsi-airlink.com/airlink
1 (800) 436-7800 (support, option 8)
• True On/Off functionality via switched relay
Other
• Dimensions: 8.2” L x 2.3” W x 1.3” H (209mm L x 59mm W x
33mmSNAP
H) without
antennas
• Radio:
2.4 GHz;
802.15.4; +20 dBm Transmit Power;
LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 • www.lsi-industries.com • (513) 372-3200
•
©LSI
Industries
Inc.
All Rights Reserved.
11/29/17
-105
dBm
Receive
Sensitivity
• Radio: SNAP 2.4 GHz; 802.15.4; +20 dBm Transmit Power;
Relay closes
on range
powerofloss
•• Supports
a wide
LED drivers and fixtures
• Seamlessly integrates into the outdoor AirLink wireless lighting control
solution
& Self-healing
Mesh Networking
• Relay
closes
on power loss
Alliance 2’ - ALI2
LED 2’ Linear High Bay
Photometry
Luminaire photometry has been conducted by a NVLAP accredited testing laboratory in accordance with IESNA LM-79-08.
As specified by IESNA LM-79-08 the entire luminaire is tested as the source resulting in a luminaire efficiency of 100%.
See http://www.lsi-industries.com/products/led-lighting-solutions.aspx for detailed photometric data.
ALI2 LEDHE 12L CA W 40
ZONAL LUMEN SUMMARY
1004
2009
3013
4017
ZONE
LUMENS
% FIXTURE
0-20
1502.83
12.50
0-30
3260.82
27.10
0-40
5448.16
45.30
0-60
9884.61
82.10
0-80
11986.78
99.60
0-90
12035.36
100.00
10-90
11653.57
96.80
20-40
3945.33
32.80
20-50
6266.91
52.10
40-70
5991.81
49.80
60-80
2102.17
17.50
70-80
546.82
4.50
80-90
48.57
0.40
90-180
0.00
0.00
0-180
12035.36
100.00
ALI2 LEDHE 12L CA N 40
ZONAL LUMEN SUMMARY
2280
4560
6841
9121
ZONE
LUMENS
% FIXTURE
0-20
2843.08
25.60
0-30
5069.1
45.60
0-40
7054.49
63.50
0-60
9895.66
89.10
0-80
11057.8
99.50
0-90
11111.56
100.00
10-90
10274.78
92.50
20-40
4211.41
37.90
20-50
5838.42
52.50
40-70
3639.36
32.80
60-80
1162.14
10.50
70-80
363.95
3.30
80-90
53.76
0.50
90-180
0.00
0.00
0-180
11111.56
100.00
LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 • www.lsi-industries.com • (513) 372-3200 • ©LSI Industries Inc. All Rights Reserved.